机械词汇表(1)
机械词汇表（1）
渐开线圆柱齿轮图样上应注明的尺寸数据Involute cylindrical gears--Information of the dimensional data to be given on the drawing
机械振动平衡术语Mechanical vibration--Balancing vocabulary
滚动轴承滚轮滚针轴承外形尺寸Rolling bearings Needle roller bearings--Track rollers--Boundary dimensions
滚动轴承滚轮滚针轴承公差Rolling bearings--Needle roller bearings-Track rollers--Tolerances
齿轮渐开线样板The involute master of gear
齿轮螺旋线样板The helix master of gear
机械密封的型式、主要尺寸、材料和识别标志Type, main dimension, material and marking of mechanical seals
挠性转子机械平衡的方法和准则Mechanical vibration--Methods and criteria for the mechanical balancing of flexible rotors
自攻锁紧螺钉的螺杆粗牙普通螺纹系列Screw thread shanks for thread forming screw--Metric coarse thread series
十字槽盘头自攻锁紧螺钉Cross recessed pan head thread forming screws
十字槽沉头自攻锁紧螺钉Cross recessed countersunk head thread forming screws
十字槽半沉头自攻锁紧螺钉Cross recessed raised countersunk head thread forming screws 六角头自攻锁紧螺钉Hexagon head thread forming screws
内六角花形圆柱头自攻锁紧螺钉Hexagon lobular socket thread forming screws
机床润滑系统Machine tools--Lubrication systems
铁氧体永磁直流电动机DC ferrite permanent magnet motors
滚动轴承词汇Rolling bearings--V ocabulary
带传动基本术语Drives using belt--Basic terminology
V 带传动术语Drives using V-belts and grooved pulleys--Terminology
同步带传动术语Synchronous belt drives--Terminology
凸缘外圈向心球轴承凸缘尺寸Radial ball bearings with flanged outer ring--Flange dimensions
滚动轴承凸缘外圈微型向心球轴承外形尺寸Rolling bearings--Miniature radial ball bearings with flanged outer ring Boundary dimensions
现场平衡设备的说明和评价Field balancing equipment--Description and evaluation
重型弹簧垫圈Single coil spring lock washers, Heavy type
鞍形弹簧垫圈Curved single coil spring lock washers
波形弹簧垫圈Wave single coil spring lock washers
可靠性、维修性与有效性预计报告编写指南Presentation of reliability, maintainability and availability predictions
55°密封管螺纹第1部分: 圆柱内螺纹与圆锥外螺纹Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1: Parallel internal and taper external threads
55°密封管螺纹第2部分: 圆锥内螺纹与圆锥外螺纹Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2: Taper internal and external threads
55°非密封管螺纹Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
滑动轴承薄壁翻边轴瓦尺寸、公差及检验方法Plain bearings--Thin-walled flanged half bearings--Dimensions, tolerances and methods of checking
球笼式同步万向联轴器型式、基本参数和主要尺寸Synchronizing universal coupling with ball and sacket--Type, foundational parameters and main dimensions
球笼式同步万向联轴器试验方法Synchroizing universal coupling with ball and sacket 纤维增强塑料层板螺栓连接挤压强度试验方法FRP Laminates-test method for bearing strength by bolted joints
滚动轴承外球面球轴承座外形尺寸Roliing bearings--Housings for insert bearing boundary dimensions
滚动轴承带座外球面球轴承外形尺寸Rolling bearings--Insert bearing units boundary dimensions
滚动轴承参数符号Rolling bearings--Symbols for quantities
滚动轴承附件轴承座外形尺寸Rolling bearings accessories--Plummer block housings--Boundary dimensions
塑料轴承极限PV试验方法Test method for PV limit of plastics bearings
圆头椭圆颈螺栓Bolts,round head with oval neck
输送链、附件和链轮Conveyor chains, attachments and chain wheels
齿轮材料及热处理质量检验的一般规定General specification for quality inspection of gear materials and their heat treatment
透平齿轮传动装置技术条件Spcification for turbine gearings
验收试验中齿轮装置机械振动的测定Determination of mechanical vibrations of gear units during acceptance testing
滚动轴承包装Rolling bearings-packaging and packing
十字槽盘头螺钉和平垫圈组合件Cross recessed pan head screw and plain washer assemblies
十字槽盘头螺钉和外锯齿锁紧垫圈组合件Cross recessed pan head screw and serrated lock washer external teeth assemblies
十字槽盘头螺钉和弹簧垫圈组合件Cross recessed pan head screw and single coil spring lock washer assemblies
十字槽盘头螺钉, 弹簧垫圈和平垫圈组合件Cross recessed pan head screw,single coil spring lock washer and plain washer assemblies
十字槽小盘头螺钉和平垫圈组合件Cross recessed small pan head screw and small plain washer assemblies
十字槽小盘头螺钉和大垫圈组合件Cross recessed small pan head serew and big plain washer assemblies
十字槽小盘头螺钉和弹簧垫圈组合件Cross recessed small pan head screw and single coil spring lock washer assemblies
十字槽小盘头螺钉和弹簧垫圈及平垫圈组合件Cross recessed small pan head screw,single coil spring lock washer and plain washer assemblies
十字槽沉头螺钉和锥形锁紧垫圈组合件Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
十字槽半沉头螺钉和锥形锁紧垫圈组合件Cross recessed raised countersunk head screw
and countersunk external toothed lock washer assemblies
十字槽凹穴六角头螺栓和平垫圈组合件Cross recessed hexagon bolt with indentation and plain washer assemblies
十字槽凹穴六角头螺栓和弹簧垫圈组合件Cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies
十字槽凹穴六角头螺栓, 弹簧垫圈和平垫圈组合件Cross recessed hexagon bolt with indentation, single coil lock washer and plain washer assemblies
六角头螺栓和平垫圈组合件Hexagon head bolt and plain washer assemblies
六角头螺栓和弹簧垫圈组合件Hexagon head bolt and single coil spring lock washer assemblies
六角头螺栓和外锯齿锁紧垫圈组合件Hexagon head bolt and serrated lock washer external teeth assemblies
六角头螺栓, 弹簧垫圈和平垫圈组合件Hexagon head bolt, single coil spring lock washer and plain washer assemblies
十字槽盘头自攻螺钉和平垫圈组合件Cross recessed pan head tapping screw and plain washer assemblies
十字槽盘头自攻螺钉和大垫圈组合件Cross recessed pan head tapping screw and large plain washer assemblies
十字槽凹穴六角头自攻螺钉和平垫圈组合件Cross recessed hexagon head tapping sorew with indentation and plain washer assemblies
十字槽凹穴六角头自攻螺钉和大垫圈组合件Cross recessed hexagon head tapping screw with indentation and large plain washer assemblies
六角头自攻螺钉和平垫圈组合件Hexagon head tapping screw and plain washer assemblies
六角头自攻螺钉和大垫圈组合件Hexagon head tapping screw and big washer assemblies 组合件用平垫圈Plain washer for assembly
组合件用大垫圈Big plain washer for assembly
组合件用弹簧垫圈Single coil spring lock washer for assembly
组合件用外锯齿锁紧垫圈Serrated lock washer external teeth for assembly
组合件用锥形锁紧垫圈Countersunk external toothed lock washer for assembly
自攻螺钉组合件用平垫圈Samll wasner for tapping screw assembly
自攻螺钉组合件用大垫圈Big washer for tapping screw assembly
商品紧固件的中等精度普通螺纹极限尺寸General purpose screw threads - Limits of sizes for commercial bolt and nut threads？Medium quality
商品紧固件的粗糙级精度普通螺纹极限尺寸General purpose screw threads - Limits of sizes for commercial bolt and nut threads？Coarse quality
磁粉离合器通用技术条件General specification for magnetic particle clutch
关节轴承杆端关节轴承Spherical plain bearings--Spherical plain bearings rod ends
关节轴承推力关节轴承Spherical plain bearings--Thrust spherical plain bearings
关节轴承向心关节轴承Spherical plain bearings--Radial spherical plain bearings
关节轴承角接触关节轴承Spherical plain bearings--Angular contact radial spherical plain bearings
刚性转子平衡品质许用不平衡的确定Balance quality of rigid rotors--Determination of permissible residual unbalance
十字槽凹穴六角自攻螺钉Cross recessed hexagon head tapping screws with indentation
1 型六角开槽螺母细牙A和B级Hexagon slotted and castle nuts, style l--Fine pitch thread--Product grades A and B
2 型六角开槽螺母细牙A和B级Hexagon slotted and castle nuts, style 2--Fine pitch thread--Product grades A and B
六角开槽薄螺母细牙A和B级Hexagon thin slotted nuts--Fine pitch thread--Product grades A and B
链条、链轮术语Terminology of chains and chainwheels
旋转轴唇形密封圈结构尺寸系列第一部分: 内包骨架旋转轴唇形密封圈Rotary shaft lip seals--Design criteria for standard applications--Part 1: rubber covered rotary shaft lip seals 旋转轴唇形密封圈结构尺寸系列第二部分: 外露骨架旋转轴唇形密封圈Rotary shaft lip seals--Design criteria for standard applications--Part 2: Metal cased rotary shaft lip seals 旋转轴唇形密封圈结构尺寸系列第三部分: 装配式旋转轴唇形密封圈Rotary shaft lip seals--Design criteria for standard applications--Part 3: assembled rotary shaft lip seals 锥齿轮承载能力计算方法Methods for the calculation of load capacity for bevel gears
通用机械渐开线圆柱齿轮承载能力简化计算方法Simplified methods for the calculation of load capacity of involute cylindrical gears for general machines
矩形内花键长度系列Straight-sided internal spline--Length series
圆柱蜗杆传动基本参数Basic parameters of cylindrical worm gears
圆柱蜗杆、蜗轮术语及代号Terminology and symbols for cylindrical worm and worm wheel
圆柱蜗杆基本齿廓Basic tooth profile of cylindrical worm
圆柱蜗杆模数和直径Module and diameter of cylindrical worm
圆柱蜗杆、蜗轮精度Accuracy of cylindrical worm and wormwheel
圆柱齿轮减速器基本参数Basic parameters for cylindrical gear units
渐开线圆柱齿轮--精度第1部分: 轮齿同侧齿面偏差的定义和允许值Cylindrical gears--system of accuracy--Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
渐开线圆柱齿轮--精度第2部分: 径向综合偏差与径向跳动的定义和允许值Cylindrical gears-system of accuracy--Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
齿条精度Accuracy of rack
摆线针轮行星传动基本术语Basic terminology of cycloidal drives
摆线针轮行星传动图示方法Representation of drawings for cycloidal drives
摆线针轮行星传动几何要素代号Symbols of geometrical data for cycloidal drives
小模数锥齿轮基本齿廓Basic rack tooth profile of fine-pitch bevel gears
小模数锥齿轮精度Accuracy of fine-pitch bevel gears
小模数圆柱蜗杆基本齿廓Basic rack tooth profile of fine-pitch cylindrical worm
小模数圆柱蜗杆、蜗轮精度Accuracy of fine-pitch cylindrical worm and wormwheel
普通Ｖ带轮Grooved pulleys for classical V-belt
窄Ｖ带轮Grooved pulleys for narrow V-belt
汽车同步带传动带轮Synchronous belt drives for automotive applications - Pulleys
农业机械用双面Ｖ带轮Agricultural machinery double V-belt pulleys
农业机械用半宽Ｖ带轮Agricultural machinery half wide V-belt pulleys
单级向心涡轮液力变矩器型式和基本参数Single-stage centripetal turbine hydrodynamic torque converters - Types and basic parameters
紧固件横向振动试验方法Transverse vibration testing method for fasteners
无头焊钉Headless studs for stud welding
圆柱头焊钉Cheese head studs for stud welding
机械密封产品型号编制方法Method of establishment for type of mechanical seals
滑动轴承整体轴套的轴径Plain bearings - Shaft diameters for unsplit bushes
滑动轴承整圆止推垫圈尺寸和公差Plain bearings - Ring type thrust washers made from strip - Dimensions and tolerances
滑动轴承半圆止推垫圈要素和公差Plain bearings - Pressed bimetallic half thrust washers - Features and tolerances
芯型弹性联轴器Resilient coupling with core element
抗静电环形V带导电性规定值和试验方法Antistatic endless V-belts - Electrical conductivity - Characteristic and method of test
汽车同步带物理性能试验方法Synchronous belt drives--Automotive belt--Determination of physical properties
农业机械用V带尺寸V-belts for agricultural machinery-Dimensions
机器理论与机构学术语Terminology for the theory of machines and mechanisms
传动用齿形链及链轮Inverted tooth chains and chainwheels
双涡轮液力变矩器通用技术条件General specifications of double--Turbine torque converter
1/4 圆锥量规Gaugers of 1/4 tapers
聚酰胺片基平带Polyamide plate based flat belt
V 带传动额定功率的计算V-belt drives - Calculation of power ratings
带传动普通及窄V带传动用带轮(基准宽度制) 槽形检验Belt drives--Pulleys for classical and narrow V-belts drives(system based on datum width)--Geometrical inspection of grooves
带传动普通及窄V带传动用带轮(有效宽度制) 槽形检验Belt drives--Pulleys for classical and narrow V-belts drives(system based effective width)--Geometrical inspection of grooves
带轮的材质、表面粗糙度及平衡Quality , Surfaceroughness and balance of transmission pulleys
带传动平带和带轮尺寸和公差Belt drives--Flat transmission belts and corresponding pulleys--Dimensions and tolerances
同步带传动带轮Synchronous belt drives - Pulleys
同步带传动额定功率和传动中心距的计算Synchronous belt drives - Calculation of power rating and drive centre distance
锥齿轮和准双曲面齿轮精度Accuracy of bevel and hypoid gears
行星传动基本术语Basic terminology of planetary drives
锥齿轮胶合承载能力计算方法Methods for the calculation of scuffing load capacity for bevel gears
防锈术语Rust prevention terminology
普通V带和窄V带尺寸Classical and narrow V-belts--Dimensions
汽车V带疲劳试验方法V-belt drives for the automotive industry--Fatigue test
同步带尺寸Synchronous belts - Dimensions
圆锥量规公差与技术条件Tolerances and specification of taper gauges
莫氏与公制圆锥量规Gauges of Morse tapers and metric tapers
7:24工具圆锥量规Gauges of 7:24 tapers
钻夹圆锥量规Gauges of drill chuck tapers
梯形螺纹极限尺寸Limits of sizes for metric trapezoidal screw threads
锥齿轮模数Modules of bevel gears
直齿及斜齿锥齿轮基本齿廓Basic tooth profile of straight and skew bevel gears
锥齿轮和准双曲面齿轮术语Terminology for bevel and hypoid gears
锥齿轮图样上应注明的尺寸数据Bevel gears？Information of the dimensional data to be given on the drawing
机械式联轴器分类Mechanical coupling - Classification
小模数圆柱齿轮减速器通用技术条件General specification for speed reducer with small module cylindrical gears
高扭矩十字槽Offset cruciform recess for rotary fastening devices
谐波齿轮传动基本术语Basic terminology of harmonic gear drive
滑动轴承卷制轴套Plain bearings - Wrapped bushes
封闭型扁圆头抽芯铆钉Mushroom head break mandrel closed end blind rivets
封闭型沉头抽芯铆钉120 deg flush head break mandrel closed end blind rivets
开口型沉头抽芯铆钉120 deg flush head break mandrel blind rivets
开口型扁圆头抽芯铆钉Mushroom head break mandrel blind rivets
抽芯铆钉技术条件Specifications for break mandrel blind rivets
60°圆锥管螺纹Taper pipe threads with 60 degree
矿用高强度圆环链High-tensile steel chains(round link) for mining
窄Ｖ带Narrow V-belt
难燃Ｖ带Fire resistant V-belt
工业用变速宽V带尺寸Size-Speed-chaingers wide V-belts for industry
汽车同步带尺寸Automotive synchronous belt - Dimensions
农业机械用Ｖ带疲劳试验方法Fatigue test method for agricultural V-belts
双圆弧圆柱齿轮基本齿廓Double-circular-arc tooth profile of basic rack for cylindrical gears
圆柱蜗杆、蜗轮图样上应注明的尺寸数据Cylindrical worm and wormwheel information of the dimensional data to be given on the drawing
滚动轴承冲压外圈滚针轴承外形尺寸方案Rolling bearings - Needle roller bearings, drawn cup, without inner ring - Boundary dimension plan
关节轴承安装尺寸Spherical plain bearings, joint type - Abutment and fillet dimensions 滑动轴承双金属结合强度破坏性试验方法Plain bearings - Metallic multilay er plain bearings - Destructive testing of bond for bearing metals
滑动轴承覆有减摩塑料层的双金属轴套Plain bearings - Bimetallic bushes with plastic overlay
平衡机防护罩和其他安全措施Batancing machines - Enclosures and other safety measu res
石油和液体石油产品立式圆筒形金属油罐容积标定法(光电内测距法) Petroleum and liquid petroleum products--Volumetric calibration of vertical cylindrical metal
tanks--Electro-optical distance-ranging internal method
标牌Plates
机械振动台技术条件Specification for mechanical vibration generator system
电动振动台技术条件Specification for electrodynamic vibration generator system
轧机油膜轴承通用技术条件General technical requirement of oil film bearing for rolling mill
汽车V带尺寸Automotive V-belts--Dimensions
一般传动用同步带Synchronous belts for general drive
V 带均匀性规范和试验方法中心距变化量法V-belts - Uniformity of belts - Centre distance variation - Specification and test method
带传动--普通Ｖ带传动Belt drives - Classical V-belt drives
带传动--窄Ｖ带传动Belt drives - Narrow V-belt drives
锯齿形(3°、30°)螺纹牙型Butterss threads with 3 and 30 degrees flank angle - Profiles 锯齿形(3°、30°)螺纹直径与螺距系列Buttress threads with 3 and 30 degrees flank angle - General plan
锯齿形(3°、30°)螺纹基本尺寸Buttress threads with 3 and 30 degrees flank angle - Basic dimensions
锯齿形(3°、30°)螺纹公差Buttress threads with 3 and 30 degrees flank angle - Tolerances 合理润滑技术通则General principle for rational lubrication technology
齿轮胶合承载能力试验方法Standard test method for scuffing load capacity of gears
焊接方螺母Square weld nuts
焊接六角螺母Hexagon weld nuts
螺纹紧固件轴向载荷疲劳试验方法Axial load fatigue testing for threaded fasteners
销剪切试验方法Pins and grooved pins - Shear test
双圆弧圆柱齿轮承载能力计算方法Methods of the calculation for load capacity of cylindrical gear with double-circular-arc tooth profile
精密机械用紧固件十字槽螺钉Fasteners for fine mechanics--Cross recessed screws
精密机械用紧固件十字槽自攻螺钉刮削端Fasteners for fine mechanics--Cross recessed tapping screws--Scrape point
腰状杆螺柱连接副型式分类Connections with waisted stud--Tape classification
腰状杆螺柱连接副螺柱Connections with waisted stud--Studs
腰状杆螺柱连接副螺母、受力套管Connections with waisted stud--Nuts, extension sleeves
多股圆柱螺旋弹簧Stranded wire cylindrical helical springs
槽销平行沟槽Grooved pins--Parallel grooved
槽销锥槽Grooved pins--Taper grooved
槽销圆头、沉头Grooved pins--With round head or countersunk head
旋转轴唇形密封圈基本尺寸和公差Rotary shaft lip type seals--Nominal dimensions and tolerances
渐开线圆柱齿轮精度检验规范Inspection code for accuracy of involute cylindrical gears 谐波传动减速器Harmonic drive reducers
缠绕式垫片试验方法Test methods for spiral wound gaskets
纺织玻璃纤维无捻粗纱棒状复合材料压缩强度的测定Textile glass--Rovings--Determination of compressive strength of rod composites
墙板自攻螺钉Dry wall screws
机械密封试验方法Code for test of machanical seal
齿轮接触疲劳强度试验方法Standard of test method for surface load capacity of gears
齿轮弯曲疲劳强度试验方法Standard of test methed for bending load capacity of gears 齿轮装置效率测定方法Determination of efficiency for gear units
旋转轴唇形密封圈性能试验方法Rotary shaft lip type seals--Performance test proceduces 复合阻尼隔振器和复合阻尼器Compound damping isolator and compound damper
V带疲劳试验方法有扭矩法V-belts--Fatigue test--Loaded method
螺纹术语The terms of screw threads
滑动轴承厚壁多层轴承衬背技术要求Plain bearings--Requirements on backings for thick-walled multilayer bearings
小螺纹牙型Miniature screw threads--Profiles
小螺纹直径与螺距系列Miniature scrcw threads--Generat plan
小螺纹基本尺寸Miniature screw threads--Basic dimensions
小螺纹公差Miniature screw threads--Tolerances
小螺纹极限尺寸Miniature screw threads--Limits of sizes
液粘调速离合器Hydroviscous variable speed clutch
湿式离合器摩擦元件试验方法Test method for friction element of wet clutch
可靠性增长大纲Programmes for reliability growth
往复运动橡胶密封圈外观质量Appearance quality for reciprocating rubber seals
旋转轴唇形密封圈外观质量Appearance quality for rotary shaft lip seals
工业用变速宽V带及其尺寸Variable speed-changers wide V-belts and size for industry 普通V带疲劳试验方法(无扭矩法) Classical V-belts--Fatigue test(non-loading method) 螺杆Threaded rods
工程用钢制焊接弯板链和链轮Welded steel type cranked link mill chains and chain wheels
带传动带轮中心距调整极限值Belt drives--Pulleys--Limiting values for adjustment of centres
圆弧圆柱齿轮基本术语Terminology of circular-arc gear
圆弧圆柱齿轮精度Accuracy of cylindrical gear with circular-arc tooth profile
圆锥过盈配合的计算和选用The calculation and selection of cone interference fits
普通螺纹极限尺寸Limits of size for general purpose screw threads
花键基本术语Basic terminology of spline
V带和多楔带传动节线位置的动态测定V-and ribbed belt--Dynamic test to determine Pitch zone location
扁圆头击芯铆钉Flat round head drive rivets
沉头击芯铆钉Countersunk head drive rivets
击芯铆钉技术条件Specifications for drive rivets
十字槽盘头自钻自攻螺钉Cross recessed pan head self-drilling tapping screws
十字槽沉头自钻自攻螺钉Cross recessed countersunk head self-drilling tapping screws 十字槽半沉头自钻自攻螺钉Cross recessed raised countersunk head self-drilling tapping screws
六角法兰面自钻自攻螺钉Hexagon flange head self-drilling tapping screws
平面二次包络环面蜗杆传动术语Planar double-enveloping worm gearing terminology
平面二次包络环面蜗杆传动几何要素代号Planar double--enveloping worm gearing geometrical data symbols
平面二次包络环面蜗杆减速器系列、润滑和承载能力Planar double-enveloping worm gearsreducer-dimensions and load capacitys
平面二次包络环面蜗杆传动精度Planar double-enveloping worm gearing accuracy
平面二次包络环面蜗杆减速器技术条件Planar double-enveloping worm gearing reducer technical specification
工业用多楔带及带轮尺寸(PH、PJ、PK、PL和PM型) V-ribbed belts and pulleys for industrial applications--Dimensions (PH PJ PK PL and PM profiles)
滚动轴承滚针和推力圆柱滚子组合轴承外形尺寸Rolling bearings--Combined needle roller thrust roller bearings--Boundary dimensions
六角法兰面螺栓小系列Hexagon flange bolts--Small series
滑动轴承金属轴承材料的压缩试验Plain bearings--Compression testing of metallic bearing materials
螺纹紧固件应力截面积和承载面积Stress area and bearing area for threaded fasteners
螺纹紧固件紧固通则General rules of tightening for threaded fasteners
螺纹紧固件拧紧试验方法Method of tightening test for threaded fasteners
六角凸缘自攻螺钉Hexagon head tapping screws with collar
六角法兰面自攻螺钉Hexagon flange head tapping screws
直廓环面蜗杆、蜗轮精度Accuracy of double enveloping worm gearing with straight line generatrix
机械振动轴与配合件平衡的键准则Mechanical vibration--Balancing--Shaft and fitment key convention
薄型楔键及其键槽Thin taper reys and their corresponding keyways
紧固件螺栓、螺钉、螺柱和螺母通用技术条件Fasteners--General requirements for blots,screws,studs and nuts
钢网架螺栓球节点用高强度螺栓High strength bolts for joints of space grid structures 直线运动支承直线运动球轴承外形尺寸和公差Linear motion bearings--Linear motion ball bearings--Boundary dimensions and tolerances
螺旋弹簧疲劳试验规范Helical springs fatigue testing standard
管道支吊架第1部分; 技术规范Pipe supports and hangers--Part 1: Technical specification
管道支吊架第2部分: 管道连接部件Pipe supports and hangers--Part 2: Pipe attachments 管道支吊架第3部分: 中间连接件和建筑结构连接件Pipe supports and hangers--Part 3: Middle connection attachments and building structure attachments
带传动联组普通V带轮(有效宽度制) Belt drives--Grooved pulleys for joined classical V-belts (effective system)
花键承载能力计算方法Calculation of load capacity of spline
齿轮磨削后表面回火的浸蚀检验Gears--Surface temper etch inspection after grinding 平头铆螺母Flat head riveted nuts
沉头铆螺母Countersunk head riveted nuts
小沉头铆螺母Small countersunk head riveted nuts
120°小沉头铆螺母120°Small countersunk head riveted nuts
平头六角铆螺母Flat head hexagon riveted nuts
铆螺母技术条件Specifications for riveted nuts
滚子链传动选择指导Guidance on the selection of roller chain drives
铆钉杆径Rivet shank diameters
精密机械用六角螺母Hexagon nuts for fine mechanics--Product grade F
栓接结构用大六角头螺栓螺纹长度按GB/T 3106 C级8.8和10.9级Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)--Product grade C-Property classes 8.8 and 10.9
栓接结构用大六角头螺栓短螺纹长度C级8.8和10.9级Hexagon bolts for high-strength structural bolting with large width across flats(short thread length)--Product grade C-Property classes 8.8 and 10.9
栓接结构用大六角螺母B级8和10级Hexagon nuts for high-strength structural bolting with large width across flats--Product grade B-Property classes 8 and 10
栓接结构用1型大六角螺母B级10级Hexagon nuts for structural bolting with large width across flats,style 1--Product grade B-Property class 10
栓接结构用平垫圈淬火并回火Plain washers for high-strength structural bolting hardened and tempered
栓接结构用1型六角螺母热浸镀锌(加大攻丝尺寸) A和B级5、6和8级Hexagon nuts for structural bolting style 1 hot-dip galvanized (oversize tapped)--Product grades A and B-Property classes 5,6 and 8
栓接结构用2型六角螺母热浸镀锌(加大攻丝尺寸)A级9级Hexagon nuts for structural bolting-style 2,hot-dip galvanized(oversize tapped)--Product grade A--Property class 9 滑动轴承烧结轴套的尺寸和公差Plain bearings--Sintered bushes--Dimensions and tolerances
滑动轴承铜合金轴套Plain bearings--Copper alloy bushes
滑动轴承流体动压润滑条件下试验机内和实际应用的滑动轴承疲劳强度Plain bearings--Bearing fatigue--Plain bearings in test rigs and in application under conditions of hydrodynamic lubrication
滑动轴承薄壁滑动轴承用金属多层材料Plain bearings--Multilayer materials for thin-walled plain bearings
滑动轴承基本符号Plain bearings--Basic symbols
滑动轴承应用符号Plain bearings--Applications
滑动轴承多层金属滑动轴承结合强度的超声波无损检验Plain bearings--Non-destructive ultrasonic testing of hond for metallic multilayer plain bearings 滑动轴承薄壁轴瓦和薄壁轴套的壁厚测量Plain bearings--Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes
滑动轴承卷制轴套外径的检测Plain bearings--Checking the outside diameter for wrapped bushes
钢制压力容器Steel pressure vessels
管壳式换热器Tubular heat exchangers
管道元件的公称通径Nominal size for pipe components
管道元件公称压力Nominal pressure for pipe components
压缩空气用橡胶软管(2.5 Mpa 以下) Rubber hose for compressed air (up to 2.5 Mpa)
工业通风机用标准化风道进行性能试验Industrial fans--Performance testing using standardized airways
船用外螺纹锻钢截止止回阀Marine forged steel male thread stop and check valves
铜及铜合金拉制管Drawn tube of copper and copper alloys
铜及铜合金毛细管Capillary tube of copper and copper alloys
工业蒸汽锅炉参数系列Specifications for industrial steam boiler
液压气动系统及元件公称压力系列Fluid power systems and components--Nominal pressures
液压泵及马达公称排量系列Hydraulic fluid power--Pumps and motors -- Geometric displacements
液压气动系统及元件缸内径及活塞杆外径Fluid power systems and components--Cylinder bores and piston rod diameters
液压气动系统及元件缸活塞行程系列Fluid power systems and components--Cylinders--Basic series of piston strokes
液压气动系统及元件活塞杆螺纹型式和尺寸系列Fluid power systems and components--Cylinders--Piston rod thread dimensions and types
液压气动系统用硬管外径和软管内径Fluid power systems and components--Connectors and associated components--Outside diameters of tubes and inside diameters of hoses 液压传动隔离式蓄能器压力和容积范围、特征量及标识Hydraulic fluid power--Gas-loaded accumulators with separators--Range of pressures and volumes,characteristic quantities and identification
液压泵和马达安装法兰和轴伸的尺寸系列及标记第一部分: 二孔和四孔法兰和轴伸Hydraulic fluid power--Positive displacement pumps and motors--Dimensions and identification code for mounting flanges and shaft ends--Part 1: Two-and four-hole flanges and shaft ends 液压泵和马达安装法兰与轴伸的尺寸系列和标记(二) 多边形法兰(包括圆形法兰) Hydraulic fluid power--Positive displacement pumps and motors--Dimensions and identification code for mounting flanges and shaft ends--Part 2: Polygonal flanges(including circular flanges) 四油口板式液压方向控制阀安装面Hydraulic fluid power--Four-port directional control valves--Mounting surfaces
焊接及切割用橡胶软管氧气橡胶软管Specification for hose for equipment for gas welding, cutting and related processes - Oxygen rubber hose
焊接及切割用橡胶软管乙炔橡胶软管Specification for hose for equipment for gas welding, cutting and related processes - Acetylene rubber hose
一般用途管法兰连接尺寸Pipe flange connectors for ordinary use--Mounting dimensions 一般用途管法兰密封面形状和尺寸Pipe flanges for ordinary use--Sealing surfaces--Forms and dimensions
小型交流风通用机技术条件A.C. miniature blowers, general specification for
井用潜水泵技术条件Specification for submersible pumps for deep well
二通插装式液压阀安装连接尺寸Hydraulic fluid power--Two-port slip-in cartridge valves cavities--Mounting dimensions
液压元件螺纹连接油口型式和尺寸Fluid power systems and components--Ports--Dimensions and design
液压缸活塞和活塞杆动密封沟槽型式、尺寸和公差Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications--Dimensions and tolerances of housings 液压缸活塞和活塞杆窄断面动密封沟槽尺寸系列和公差Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications--Dimensions and tolerances of
housings--Narrow section series
镍及镍铜合金管Nickel and nickel-copper alloy tube
石棉水泥输水管及其接头Asbestos-cement pressure pipes and joints for water
石棉水泥输煤气管Asbestos-cement pressure pipe for gas transmission
石棉水泥井管Asbestos-cement pipe for well casing
不锈耐酸钢极薄壁无缝钢管Thinnest-wall seamless tubes of stainless and acid-resistance steel
低压流体输送用焊接钢管Welded steel pipe for low pressure liquid delively
真空技术术语Terminology for vacuum technology
真空技术系统图用图形符号Vacuum technology--Graphical symbols
水泵流量的测定方法Methods for measurement of capacity of pump
炼厂、化工及石油化工流程用离心泵通用技术条件Centrifugal pumps for refinery, chemical and petrochemical processes--General technical specifications
离心泵、混流泵、轴流泵和旋涡泵试验方法Test methods for centrifugal, mixed flow, axial and regenerative pumps
通风机基本型式、尺寸参数及性能曲线Basic types sizes parameters and characteristics of fans
可锻铸铁管路连接件Malleable cast iron pipe fittings
灰口铸铁管件Gray iron castigs for pipe fittings
砂型离心铸铁管Cast-iron pressure pipe centrifugally cast in sand-lined molds
连续铸铁管Cast-iron pressure pipe made by continuous casting process
液压气动用O形橡胶密封圈尺寸系列及公差Fluid systems--Sealing devices--O-rings--Inside diameters, cross-sections, tolerances and size identification code O 形橡胶密封圈外观质量检验标准Appearance quality acceptance criteria for rubber O-rings
液压气动用O形橡胶密封圈沟漕尺寸和设计计算Fluid power systems--O-ring--Design criteria for O-ring housing--Basic calculation
硬质合金顶锤与压缸Anvils and high pressure cylinders made from cemented carbide
P3型镀锌金属软管Type p3 galvanized metallic flexible hose
S型钎焊不锈钢金属软管Type S brazed stainless steel flexible metallic hose
钢丝增强液压橡胶软管和软管组合件Rubber hoses and hose assemblies--Wire reinforced hydraulic type
液压系统通用技术条件Hydraulic fluid power--General rules relating to systems
容积式压缩机验收试验Displacement compressor-Acceptance tests
液力传动术语Hydrodynamic drive terminology
气动调节阀Pneumatic industrial process control valves
流体输送用热塑性塑料管材公称外径和公称压力Thermoplastics pipes for the conveyance of fluids--Nominal outside diameters and nominal pressures
化工用硬聚氯乙烯(PVC-U)管材Unplasticized polyvinyl chloride (PVC-U) pipes for chemical industry
铝及铝合金管材外形尺寸及允许偏差Wrought aluminium and aluminium alloy tubes--Dimensions and deviations
铝及铝合金热挤压管第一部分: 无缝圆管Aluminium and aluminium alloy extruded tubes--Part 1: Seamless tubes
缠绕式垫片水压密封性能试验方法Spiral wound gaskets test method of hydraulic pressure sealing characteristics
缠绕式垫片蒸汽密封性能试验方法Spiral wound gaskets test method of steam sealing characteristics
缠绕式垫片分类Specification and symbol of spiral wound gaskets
缠绕式垫片管法兰尺寸系列Dimensional series of spiral wound gaskets for pipe flanges 缠绕式垫片技术条件Specification of spiral wound gaskets
压缩机、凿岩机械与气动工具优先压力Compressors, rock drilling machines and pneumatic tools - Preferred pressures
容积式压缩机术语总则Displacement compressors vocabulary--General
压缩机分类Compressors--Classification
容积式压缩机噪声声功率级的测定--工程法Determination of sound power level for noise emitted by displacement compressors--Engineering method
夹紧型真空快卸法兰Vacuum technology clamped type quick release flange
拧紧型真空快卸法兰Vacuum technology screwed type quick release flange
钢质无缝气瓶Seamless steel gas cylinders
钢质焊接气瓶Welded steel gas cylinders
高压锅炉用无缝钢管Seamless steel tubes and pipes for high pressure boiler
橡胶、塑料软管及软管组合件液压试验方法Rubber and plastics hoses and hose assemblies--Hydrostatic testing
橡胶、塑料软管低温曲挠试验Rubber and plastics hoses--Subambient temperature flexibility tests
橡胶或塑料软管及纯胶管弯曲试验Rubber or plastics hoses and tubing--Bending tests 胶管耐压扁试验方法Rubber hose--Test method for crush resistance
橡胶、塑料软管及软管组合件真空性能的测定Rubber and plastics hoses and hose assemblies--Determination of suction resistance
橡胶、塑料软管及软管组合件无屈挠液压脉冲试验Rubber or plastics hoses and hose assemblies--Hydraulic impulse test without flexing
扩口式端直通管接头Flared type tube fittings--Straight thread connector--Assembly
扩口式端直通管接头体Flared type tube fittings--Straight thread connector--Body
扩口式锥螺纹直通管接头Flared type tube fittings--Male connector--Assembly
扩口式锥螺纹直通管接头体Flared type tube fittings--Male connector--Body
扩口式锥螺纹长管接头Flared typed tube fittings--Straight taread long connector--Assembly
扩口式锥螺纹长管接头体Flared type tube fittings--Straight thread long connector--Body 扩口式直通管接头Flared type tube fittings--Union--Assembly
扩口式直通管接头体Flared type tube fittings--Union--Body
扩口式锥螺纹直角管接头Flared type tube fittings--Male elbow--Assembly
扩口式锥螺纹直角管接头体Flared type tube fittings--Male elbow--Body
扩口式直角管接头Flared type tube fittings--Union elbow--Assembly
扩口式直角管接头体Flared type tube fittings--Union elbow--Body
扩口式可调向端直角管接头Flared type tube fittings--Straight thread elbow-- Assembly 扩口式可调向端直角管接头体Flared type tube fittings--Straight thread elbow--Body
扩口式组合直角管接头Flared type tube fittings--Swivel elbow--Assembly
扩口式组合直角管接头体Flared type tube fittings--Swivel elbow--Body
扩口式可调向端三通管接头Flared type tube fittings--Straight thread branch tee--Assembly
扩口式可调向端三通管接头体Flared type tube fittings--Straight thread branch tee --Body 扩口式组合直角三通管接头Flared type tube fittings--Swivel run tee--Assembly
扩口式组合直角三通管接头体Flared type tube fittings--Swivel run tee--Body
扩口式锥螺纹三通管接头Flared type tube fittings--Male branch tee--Assembly
扩口式锥螺纹三通管接头体Flared type tube fittings--Male branch tee--Body
扩口式变径锥螺纹三通管接头Flared type tube fittings--Male branch tee reducer-- Assembly
扩口式变径锥螺纹三通管接头体Flared type tube fittings--Male branch tee reducer--Body 扩口式可调向端直角三通管接头Flared type tube fittings--Straight thread run tee-- Assembly
扩口式可调向端直角三通管接头体Flared type tube fittings--Straight thread run tee-- Body
扩口式组合三通管接头Flared type tube fittings--Swivel branch tee--Assembly
扩口式组合三通管接头体Flared typed tube fittings--Swivel branch tee--Body
扩口式三通管接头Flared type tube fittings--Union tee--Assembly
扩口式三通管接头体Flared type tube fittings--Union tee--Boby
扩口式三通变径管接头Flared type tube fittings--Union tee reducer--Assembly
扩口式三通变径管接头体Flared type tube fittings--Union tee reducer--Body
扩口式四通管接头Flared type tube fittings--Union cross--Assembly
扩口式四通管接头体Flared type tube fittings--Union cross--Body
扩口式焊接管接头Flared type tube fittings--Weld male connector--Assembly
扩口式焊接管接头体Flared type tube fittings--Weld male connector--Body
扩口式隔壁直通管接头Flared type tube fittings--Bulkhead union--Assembly
扩口式隔壁直通管接头体Flared type tube fittings--Bulkhead union--Body
扩口式隔壁直角管接头Flared type tube fittings--Bulkhead union elbow--Assembly
扩口式隔壁直角管接头体Flared type tube fittings--Bulkhead union elbow--Body
扩口式压力表管接头Flared type tube fittings--Connector for pressure gauge--Assembly 扩口式压力表管接头体Flared type tube fittings--Connector for pressure gauge--Body
扩口式管接头管套Flared type tube fittings--Sleeve
扩口式A 型管接头螺母Flared type tube fittings--Style A nut
扩口式B 型管接头螺母Flared type tube fittings--Style B nut
扩口式管接头锁紧螺母Flared type tube fittings--Locknut
扩口式管接头空心螺栓Flared type tube fittings--Inverted flare bolts
扩口式管接头密合垫Flared type tube fittings--Seat insert
扩口式管接头锁紧螺母垫圈Flared type tube fittings--Back-up washer
扩口式管接头技术条件Specification for flared type tube fittings
离心泵技术条件(II类) Technical specifications for centrifugal pumps--Class II
离心泵技术条件(Ⅲ类) Technical specifications for centrifugal pumps--Class Ⅲ
轴向吸入离心泵底座尺寸和安装尺寸End-suction centrifugal pumps--Baseplate and installation dimensions
轴向吸入离心泵机械密封和软填料用的空腔尺寸End-suction centrifugal
pumps--Dimensions of cavities for mechanical seals and for soft packing
轴向吸入离心泵(16 bar) 标记、性能和尺寸End-suction centrifugalpumps (rating 16 bar)--Designation, nominal duty point and dimensions
预应力混凝土输水管(震动挤压工艺) Prestressed vibrohydropressed concrete pipe for water
预应力混凝土输水管(管芯缠丝工艺) Core type prestressed concrete pipe for water
容积式制冷压缩机性能试验方法The methods of performance test for positive displacement refrigerant compressors
建筑排水用硬聚氯乙烯管材Unplastisized polyvinyl chloride pipes for drainage in buildings
建筑排水用硬聚氯乙烯管件Unplasticized polyvinyl chloride fittings for drainage in buildings
液力偶合器型式和基本参数Fluid coupling--Types and basic specifications
液化石油气钢瓶Liquefied petroleum gas cylinders
液压快换接头尺寸和要求Hydraulic fluid power--Quick action couplings--Dimensions and requirements
液压快换接头试验方法Hydraulic fluid power--Quick action couplings--Test methods
纤维缠绕压力容器制备和内压试验方法Method for preparation and internal pressure testing of filament wound pressure vessels
真空法兰Vacuum flanges
超高真空法兰结构型式Ultra-high vacuum flange--Types
超高真空法兰尺寸Ultra-high vacuum flange--Dimensions
超高真空法兰用铜密封垫Ultra-high vacuum flange--Copper seal gaskets
长期恒定内压下热塑性塑料管材耐破坏时间的测定方法Standard test method for time-to-failure of thermoplastic pipe under constant internal pressure
柔性机械接口灰口铸铁管Soft mechanical joint grey cast iron pipe
水轮泵名词术语及定义Terms and definitions of water-turbine pumps
水轮泵试验方法Testing methods of water-turbine pump
水轮泵型式与基本参数Types and basic parameters of water-turbine pump
液压缸活塞用带支承环密封沟槽型式、尺寸和公差Hydraulic fluid power--Cylinders--Piston seal housings incorporating bearing rings--Dimensions and tolerances 液压缸活塞杆用防尘圈沟槽型式、尺寸和公差Hydraulic fluid power--Cylinders--Reciprocating--Housings for rod wipers--Dimensions and tolerances 热塑性塑料管材纵向回缩率的测定Thermoplastics pipes-Determination of longitudinal reversion
袋式除尘器分类及规格性能表示方法Classification and specification for bag filters
双涡轮液力变矩器主要参数Basic parameters of double-turbine torque converter
消防吸水胶管性能要求和试验方法Rubber suction hose for fire-fighting purpose performance requirements and test methods
离心泵名词术语Glossary of terms for centrifugal pump
容积式压缩机噪声声功率级的测定简易法Determination of sound power level for noise emitted by displacement compressors--Survey method
使用非石油基制动液的道路车辆液压制动系统用制动软管组合件Brake hose assemblies for hydraulic braking systems of road vehicles used with non-petroleum-base brake
fluid
使用石油基制动液的道路车辆液压制动系统用制动软管组合件Brake hose assemblies for hydraulic braking systems of road vehicles used with petroleum-base brake fluid 橡胶或塑料软管容积膨胀的测定Rubber or plastics hoses--Determination of volumetric expansion
气瓶颜色标志Coloured cylinder mark for gases
热塑性塑料管材及管件密度的测定第Ⅰ部分: 聚乙烯管材及管件基准密度的测定Determination of density of thermoplastic pipes and fittings--Part Ⅰ: Determination of reference density of polyethylene pipes and fittings
热塑性塑料管材及管件密度的测定第Ⅱ部分: 聚丙烯管材及管件密度的测定Determination of density of thermoplastic pipes and fittings--Part Ⅱ: Determination of density of polypropylene pipes and fittings
工业管路的基本识别色和识别符号Basic identification colours and code indications for industrial pipelines
液化石油气瓶阀Valves for liquefied petroleum gas cylinders
橡胶软管术语Rubber hose--Glossary of terms
涡轮分子泵性能测试方法Methods of measurement of the performance characteristics of tubo-molecular pumps
往复活塞压缩机机械振动测量与评价Measurement and evluation of mechanical vibration of reciprocating piston compressors
计量泵Metering pump
机动往复泵试验方法Method of testing power reciprocating pump
往复泵分类和名词术语Classification and vocabulary for reciprocating pump
往复活塞空气压缩机基本参数Reciprocating piston air compressors--Basic parameters 焊接、切割及类似工艺用气瓶减压器Regulators for gas cylinders used in welding, cutting and allied processes
气动系统通用技术条件Pneumatic fluid power--General rules for the application of equipment to transmission and control systems
二通插装式液压阀技术条件Hydraulic fluid power--Two-port slip-in cartridge valves--Cavities--Technical requirements
液压元件通用技术条件Hydraulic fluid power--General rules of technical requirements for hydraulic components
液压泵、马达空载排量测定方法Hydraulic fluid power--Positive displacement pumps andmotors--Determination of derived capacity
液压气动用管接头及其附件公称压力系列Fluid power systems and components--Connectors and associated components--Nominal pressures
液压缸及气缸公称压力系列Fluid power systems and components--Cylinders--Nominal pressures
液压软管总成试验方法Hydraulic fluid power--Hose assemblies--Method of test
气动五气口方向控制阀第一部分: 不带电气接头的安装面Pneumatic fluid power--Five-port directional control valves--Part 1: Mounting interface surfaces without electrical connector
气动五气口方向控制阀第二部分带电气接头的安装面Pneumatic fluid power--Five-port directional control valves--Part 2: Mounting interface surfaces with optional
elettrical connector
气动五气口方向控制阀第三部分: 功能识别编码体系Pneumatic fluid power--Five-port directional control valves--Part 3: Code system for communication of valve functions
板式液压流量控制阀安装面Hydraulic fluid power--Compensated flow control valves--Mounting surfaces
液压叠加阀安装面Hydraulic fluid power--Modular stack valves--Mounting surfaces
板式联接液压压力控制阀(不包括溢流阀)顺序阀、卸荷阀、节流阀和单向阀安装面Hydraulic fluid power--Pressure control valves (excluding pressure relief valves ), sequence valves, unloading valves, throttle valves and check valves--Mounting surfaces
板式连接液压溢流阀安装面Hydraulic fluid power-pressure relief valves--Mounting surfaces
缸内径8~25mm的单杆气缸安装尺寸Pneumatic fluid power--Single rod cylinders--Bores from 8 to 25 mm--Mounting dimensions
流量控制阀试验方法Hydraulic fluid power--Valves--Testing method of flow control valves
压力控制阀试验方法Hydraulic fluid power--Valves--Testing method of pressure control valves
方向控制阀试验方法Hydraulic fluid power--Valves--Testing method of directional control valves
液压阀压差流量特性试验方法Hydraulic fluid power--Valves--Method of determining pressure diffrential--Flow characteristics
卡箍式柔性管接头技术条件Specification for flexible coupling of housing
卡箍式柔性环型管接头Flexible coupling of housing for pipe end with rib ring
卡箍式柔性肩型管接头Flexible coupling of housing for pipe end with shoulder
液化石油气钢瓶定期检验与评定Periodic inspection and evaluation of liquefied petroleum gas steel cylinders
气瓶专用螺纹Special threads for gas cylinders
气瓶专用螺纹量规Special thread gauges for gas cylinders
气瓶用易熔合金塞Fusible plug for gas cylinders
水嘴分类、型号命名方法Classification and type nomenclature for taps
水暖用内螺纹连接阀门Valves with female screw ends for water-heating system
液压快换接头螺纹连接尺寸及要求Hydlaulic fluid power--Quick action couplings--Thread connecting dimensions
液压和气动缸筒用精密内径无缝钢管Inside diameter required precision seamless steel tube for hydraulic and pneumatic cylinder use
梯唇型橡胶圈接口铸铁管Grey cast iron pipes with rubber ring of ladder-lip-shaped
柔性机械接口铸铁管件Soft mechanical joint grey cast iron fittings
硬聚氯乙烯(PVC-U) 管件坠落试验方法Test method for unplasticized (PVC-U) fittings by falling
热塑性塑料管材、管件维卡软化温度的测定Thermoplastics pipes and fitting-Determination of vicat softening temperature
注射成型硬质聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)、丙烯腈-丁二烯-苯乙烯三元共聚物(ABS)和丙烯腈-苯乙烯-丙烯酸盐三元共聚物(ASA)管件热烘箱试验方法
Injection-moulded unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C),acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings Hot oven test method
热塑性塑料管材拉伸性能试验方法聚氯乙烯管材Test methods of tensile properties for thermoplastic pipes--Polyvinyl chloride (PVC) pipes
热塑性塑料管材拉伸性能试验方法聚乙烯管材Test methods of tensile properties for thermoplastic pipes--Polyethylene (PE) pipes
硬质塑料管材弯曲度测量方法Determination of deflection for rigid plastic pipes
塑料管材尺寸测量方法Method for dimension measuring of plastic pipes
热交换器用铜合金无缝管Seamless copper alloy tube for condenser and heat-exchanger 压力表用锡青铜管Bronze tube for pressure-gauge
矩形和方形铜及铜合金波导管Copper and copper alloys--Rectangular and square waveguid tube
圆形铜合金波导管Copper and copper alloys--Circular waveguid tube
压力容器公称直径Nominal diameter of pressure vessels
液压软管接头连接尺寸扩口式Hydraulic fluid power--Hose connector--Connecting dimension (Part Ⅰ--Flare type)
液压软管接头连接尺寸卡套式Hydraulic fluid power--Hose connector--Connecting dimension (Part Ⅱ--Insert type)
液压软管接头连接尺寸焊接式或快换式Hydraulic fluid power--Hose connector--Connecting dimension (Part Ⅲ--Welding or quick-action type)
无管芯重力热管铝管材Aluminium tubes used for wickless gravity heat pipes
铝无管芯重力热管Wickless aluminium gravity heat pipes
液压缸气缸安装尺寸和安装型式代号Fluid power systems and components--Cylinders--Identification code for mounting dimensions and mounting types 电冰箱用全封闭型电动机--压缩机Hermetic motor-compressors for refrigerators
钢制管法兰类型与参数Types and parameters for steel pipe flanges
平面、突面整体钢制管法兰Intergral steel pipe flanges with flat face or raised face
凹凸面整体钢制管法兰Integral steel pipe flanges with male and female face
榫槽面整体钢制管法兰Integral steel pipe flanges with tongue and groove face
环连接面整体钢制管法兰Integral steel pipe flanges with ring-joint face
突面带颈螺纹钢制管法兰Hubbed screwed steel pipe flanges with raised face
平面、突面对焊钢制管法兰Steel pipe welding neck flanges with flat face or raised face 凹凸面对焊钢制管法兰Steel pipe welding neck flanges with male and female face
榫槽面对焊钢制管法兰Steel pipe welding neck flanges with tongue and groove face
环连接面对焊钢制管法兰Steel pipe welding neck flanges with ring-joint face
凹凸面带颈平焊钢制管法兰Hubbed slip-on-welding steel pipe flanges with male and female face
榫槽面带颈平焊钢制管法兰Hubbed slip-on-welding steel pipe flanges with tongue and groove face
环连接面带颈平焊钢制管法兰Hubbed slip-on-welding steel pipe flanges with ring-joint face
突面带颈承插焊钢制管法兰Hubbed socket welding steel pipe flanges with raised face 凹凸面带颈承插焊钢制管法兰Hubbed socket welding steel pipe flanges with male and
female face
榫槽面带颈承插焊钢制管法兰Hubbed socket welding steel pipe flanges with tongue and groove face
环连接面带颈承插焊钢制管法兰Hubbed socket welding steel pipe flanges with ring-joint face
环连接面对焊环带颈松套钢制管法兰Loose hubbed steel pipe flanges with welding neck collar with ring-joint face
突面对焊环带颈松套钢制管法兰Loose hubbed steel pipe flanges with welding neck collar with raised face
平面、突面板式平焊钢制管法兰Slip-on-welding plate steel pipe flanges with flate face or raised face
突面对焊环板式松套钢制管法兰Loose plate steel pipe flanges with welding neck collar with raised face
凹凸面对焊环板式松套钢制管法兰Loose plate steel pipe flanges with welding neck collar with male and female face
榫槽面对焊环板式松套钢制管法兰Loose plate steel pipe flanges with welding neck collar with tongue and groove face
突面平焊环板式松套钢制管法兰Loose plate steel pipe flanges with weld-on collar with raised face
凹凸面平焊环板式松套钢制管法兰Loose plate steel pipe flanges with weld-on collar with male and female face
榫槽面平焊环板式松套钢制管法兰Loose plate steel pipe flanges with weld-on collar with tongue and groove face
翻边环板式松套钢制管法兰Loose plate steel pipe flanges with lapped end
平面、突面钢制管法兰盖Steel pipe blank flanges with flat face or raised face
凹凸面钢制管法兰盖Steel pipe blank flanges with male and female face
榫槽面钢制管法兰盖Steel pipe blank flanges with tongue and groove face
环连接面钢制管法兰盖Steel pipe blank flanges with ring-joint face
钢制管法兰技术条件Specification for steel pipe flanges
平面型钢制管法兰用石棉橡胶垫片Asbestos rubber gaskets for steel pipe flanges with full face
凸面型钢制管法兰用石棉橡胶垫片Asbestos rubber gaskets for steel pipe flanges with raised face
凹凸面型钢制管法兰用石棉橡胶垫片Asbestos rubber gaskets for steel pipe flanges with male and female face
榫槽面型钢制管法兰用石棉橡胶垫片Asbestos rubber gaskets for steel pipe flanges with tongue and groove face
钢制管法兰连接用八角形金属环垫Octagonal metallic ring gaskets for steel pipe flanges joints
钢制管法兰连接用椭圆形金属环垫Oval metallic ring gaskets for steel pipe flange joints 钢制管法兰用石棉橡胶垫片技术条件Specification for asbestos rubber gaskets for steel pipe flanges
钢制管法兰连接用金属环垫技术条件Specification for metallic ring gaskets for steel pipe flange joints
平面、突面带颈平焊钢制管法兰Hubbed slip-on-welding steel pipe flanges with flate face or raised face
机动往复泵Power reciprocating pump
蒸汽往复泵试验方法Testing methods of steam reciprocating pump
气瓶水压试验方法Method for hydraulic test of gas cylinders
气瓶疲劳试验方法Method for cycling test of gas cylinders
中小型轴流泵型式与基本尺寸Axial-flow pump of medium-small size--Types and basic parameters
橡胶和塑料软管及软管组合件电阻的测定Rubber and plastics hoses and hose assemblies--Determination of electrical resistance
橡胶、塑料软管和软管组合件尺寸测量方法Rubber and plastics hoses and hose assemblies--Methods of measurement of dimensions
橡胶和塑料软管及软管组合件试验压力、爆破压力与设计工作压力的比率Rubber and plastics hoses and hose assemblies--Ratios of proof and burst pressure to design working pressure 橡胶、塑料软管内径尺寸和长度公差Rubber and plastics hoses--Bore diameters and tolerances on length
橡胶和塑料软管及软管组合件选择、贮存、使用和维护指南Rubber and plastics hose and hose assemblies--Guide to selection,use,and maintenance
橡胶和塑料软管及软管组合件标志、包装和运输规则Rubber and plastics hose and hose assemblies--Rules for marking,package and transportation
聚乙烯(PE)管材和管件根据聚乙烯公称密度和熔体流动速率命名的方法Polyethylene (PE) pipes and fittings--Designation of polyethylene based on nominal density and melt flow rate 聚乙烯(PE)管材和管件熔体流动速率试验方法Polyethylene (PE) pipes and fittings--Determination ofmelt flow rate
硬聚氯乙烯(PVC-U) 饮水管材和管件铅、锡、镉、汞的萃取方法及允许值Unplasticized polyvinyl chloride (PVC-U) pipes and fittings for drinking water supply--Extractability of lead, tin, cadmium and mercury occurring as impurities--Test method and pemitted levels 硬聚氯乙烯(PVC-U)管材吸水性试验方法Unplasticized polyvinyl chloride (PVC-U) pipes--Determination of water absorption
硬聚氯乙烯(PVC-U)管材耐丙酮性试验方法Unplasticized polyvinyl chloride (PVC-U) pipes--Determination of resistance to acetone
塑料管材耐外负荷试验方法Test method for external loading resistance for plastic pipe 石油裂化用无缝钢管Seamless steel tubes for petroleum cracking
给水用硬聚氯乙烯（PVC-U）管材Unplasticized polyvinyl chloride (PVC-U) pipe for water supply
埋地排污、废水用硬聚氯乙烯（PVC-U）管材Unplasticized poly vinyl chlorid (PVC-U) pipes for buried drainage and sewerage systems
医用软聚氯乙烯管材Plasticized polyvinyl chloride (PVC)tubing for medical uses
活塞式单级制冷压缩机Single-stage reciprocating refrigerant compressors
空调用通风机安全要求Safety requirements of fan for air conditioning
通风机现场试验Site testing of fams
近海停泊排吸油橡胶软管的分类、规格和基本技术要求Classification, dimension and basic requirements for rubber hose - Oil suction and discharge - Offshore mooring 飞机地面加油和泄油用橡胶软管Rubber hoses for aircraft ground fuelling and defuelling
机械类常用英语词汇大全
机械类常用英语词汇大全 一字螺丝批 slot type screwdriver 一点透视 one-point perspective 二画 二合一黏合剂 epoxy resin adhesive 二合胶；混合胶 epoxy glue 二维的；平面的 two-dimensional 二进制 binary 二极管；整流子 diode 二号螺丝攻 second tap 二路开关 two-way switch 十进制的；公制的 metric 人工制品 artefact 人造板 man-made board 人体工程学 ergonomics; human engineering 人体尺寸 human dimension 人体测量学 anthropometry; anthropometrics 刀片 blade 刀身 blade 刀具 tool 刀具溜座 carriage 刀柱 tool post 刀架 tool rest 刀架底座 tool rest bracket 刀座帷；床鞍 apron 刀座鞍；溜板座 saddle 力 force 力三角形 triangle of force 力平行四边形 parallelogram of force 力多边形；多边形力学 polygon of force 力的分解 force resolution 力架；亮漆 lacquer 力矩 moment 力偶 couple 力矩定律 law of moment 力-距离图表 force-distance graph 力图 force diagram 力线 line of force 力点 effort 十字榫 cross halving joint 十字螺丝 Philip s head screw 十字螺丝批 Philip s type screwdriver 丁字尺；T 尺 tee square 三画 三爪夹头 three-jaw chuck 三角尺 set square 三角形结构系杆 triangulation tie 三角锉 triangular file 三维的；立体的 three-dimensional 三氯甲烷；哥罗芳 chloroform 三聚氰胺；蜜胺 melamine 三点透视 three-point perspective 上油漆 painting 上釉 enamelling 凡立水 varnish 叉形顶尖 fork centre 口罩 mask 士力；虫漆 shellac 士巴拿；扳手 spanner 大芯夹板；宽条芯夹板 blockboard; solid corestock-laminated board 大量制造 mass production
机械词汇表(1)
机械词汇表（1） 渐开线圆柱齿轮图样上应注明的尺寸数据Involute cylindrical gears--Information of the dimensional data to be given on the drawing 机械振动平衡术语Mechanical vibration--Balancing vocabulary 滚动轴承滚轮滚针轴承外形尺寸Rolling bearings Needle roller bearings--Track rollers--Boundary dimensions 滚动轴承滚轮滚针轴承公差Rolling bearings--Needle roller bearings-Track rollers--Tolerances 齿轮渐开线样板The involute master of gear 齿轮螺旋线样板The helix master of gear 机械密封的型式、主要尺寸、材料和识别标志Type, main dimension, material and marking of mechanical seals 挠性转子机械平衡的方法和准则Mechanical vibration--Methods and criteria for the mechanical balancing of flexible rotors 自攻锁紧螺钉的螺杆粗牙普通螺纹系列Screw thread shanks for thread forming screw--Metric coarse thread series 十字槽盘头自攻锁紧螺钉Cross recessed pan head thread forming screws 十字槽沉头自攻锁紧螺钉Cross recessed countersunk head thread forming screws 十字槽半沉头自攻锁紧螺钉Cross recessed raised countersunk head thread forming screws 六角头自攻锁紧螺钉Hexagon head thread forming screws 内六角花形圆柱头自攻锁紧螺钉Hexagon lobular socket thread forming screws 机床润滑系统Machine tools--Lubrication systems 铁氧体永磁直流电动机DC ferrite permanent magnet motors 滚动轴承词汇Rolling bearings--V ocabulary 带传动基本术语Drives using belt--Basic terminology V 带传动术语Drives using V-belts and grooved pulleys--Terminology 同步带传动术语Synchronous belt drives--Terminology 凸缘外圈向心球轴承凸缘尺寸Radial ball bearings with flanged outer ring--Flange dimensions 滚动轴承凸缘外圈微型向心球轴承外形尺寸Rolling bearings--Miniature radial ball bearings with flanged outer ring Boundary dimensions 现场平衡设备的说明和评价Field balancing equipment--Description and evaluation 重型弹簧垫圈Single coil spring lock washers, Heavy type 鞍形弹簧垫圈Curved single coil spring lock washers 波形弹簧垫圈Wave single coil spring lock washers 可靠性、维修性与有效性预计报告编写指南Presentation of reliability, maintainability and availability predictions 55°密封管螺纹第1部分: 圆柱内螺纹与圆锥外螺纹Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1: Parallel internal and taper external threads 55°密封管螺纹第2部分: 圆锥内螺纹与圆锥外螺纹Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2: Taper internal and external threads
专业英语词汇：机械加工
抛光 polishing 安装 to assemble 扳手 wrench 半机械化 semi-mechanization; semi-mechanized 半自动滚刀磨床 semi-automatic hob grinder 半自动化 semi-automation; semi-automatic 备件 spare parts 边刨床 side planer 变速箱 transmission gear 柄轴 arbor 部件 units; assembly parts 插床 slotting machine 拆卸 to disassemble 超高速内圆磨床 ultra-high-speed internal grinder 车床 lathe; turning lathe 车刀 lathe tool 车轮车床 car wheel lathe 车削 turning 车轴 axle 衬套 bushing 按英文字母排序 3-Jaws indexing spacers 三爪、分割工具头 A.T.C.system 加工中心机刀库 Aluminum continuous melting & holding furnaces 连续溶解保温炉Balancing equipment 平衡设备 Bayonet 卡口 Bearing fittings 轴承配件 Bearing processing equipment 轴承加工机 Bearings 轴承 Belt drive 带传动 Bending machines 弯曲机 Blades 刀片 Blades,saw 锯片 Bolts,screws & nuts 螺栓,螺帽及螺丝 Boring heads 搪孔头 Boring machines 镗床 Cable making tools 造线机 Casting,aluminium 铸铝 Casting,copper 铸铜 Casting,gray iron 铸灰口铁 Casting,malleable iron 可锻铸铁
机械专业英语高频词汇讲解
机械专业英语高频词汇 metal cutting 金属切削 machine tool 机床 technology of metals金属工艺学 cutter 刀具 friction 摩擦 link 联结 drive/transmission 传动 shaft 轴 elasticity 弹性 frequency characteristic 频率特性 error 误差 response响应 allocation 定位 jig 机床夹具 term 语术 d ynamic 动力学 k inematic运动学 s tatic 静力学 a nalyse mechanics 分析力学 p ulling 拉伸 s hear 剪切 t wist 扭转 b ending stress 弯曲应力 i ntensity 强度 t hree-phase AC 三相交流电 m agnetic circles 磁路 t ransformer变压器 a synchronous motor 异步电动机 g eometrical 几何形状 p recision 精度 s inusoid 正弦形的 h itting压缩 A C circuit 交流电路 m achining allowance 机械加工余量 d eforming forc e 变形力 d eformation 变形 s tress 应力 r igidity 硬度 r igidity 刚度 h eat treatment 热处理 d ecarburization 脱碳 c ircuit 电路
f raising铰孔 semiconductor element 半导体元件 f eedback 反馈 g enerator 发生器 D C electrical source直流电源 g ate circuit 门电路 l ogic algebra//////algorithm逻辑代数 e xternal grinding 外圆磨削 internal grinding内圆磨削 p lane grinding 平面磨削 c arburization 渗碳 gearbox 变速箱 c lutch 离合器 r eamer铰刀 t hread processing 螺纹加工 s crew 螺钉 m ill 铣削 m illing cutter 铣刀 p ower 功率 w orkpiece 工件 g ear machining 齿轮加工 g ear 齿轮 m ain movement 主运动 d irection of main movem 主运动方向ent d irection of feed进给方向 f eed movement 进给运动 r esultant movement of fe 合成进给运动ed r esultant movement of cut 合成切削运动ting d irection of resultant cutting 合成切削运动方向motion c utting depth 切削深度 r ake face 前刀面 n ose of tool刀尖 r ake angle 前角 c learance angle 后角 p laning 龙门刨削 s pindle 主轴 h eadstock主轴箱 c huck 卡盘 m achining center 加工中心 l athe tool 车刀 l athe 车床 b ore 钻削镗削 t urning车削 g rinder 磨床
橡胶机械术语大全
密闭式炼胶机械 密（闭式）炼（胶）机internal mixer 翻转式密炼机dispersion mixer 加压式捏炼机pressurized kneader 总容积net chamber volume 工作容积working volume 填充系数filled coefficient(工作容积/总容积) 转子速比rotating speed ratio of rotors 左传动left-hand drive 右传动right-hand drive 密炼室mixing chamber 正面壁chamber side 侧面壁chamber end 转子rotor 椭圆形转子elliptical type rotor 圆柱形转子cylindrical type rotor 相切型转子tangential rotor 啮合型转子intermeshing rotor 同步技术转子synchronous technological rotor 转子凸棱wing, nog 转子密封装置dust stop of rotor 加料门feed hopper door 压料装置pressing ram device 压砣ram 卸料装置discharge device 滑动式卸料装置slide door discharge device 摆动式卸料装置drop door discharge device 卸料门discharge door 翻转装置tilting device 上辅机up-stream equipment 下辅机down-stream equipment 胶片冷却装置batch off unit, slab cooling unit 开放式炼胶机械 开（放式）炼（胶）机mill, two-roll mill 压片机sheeting mill 热炼机warming mill 破胶机breaker 粉碎机grinding mill 粗碎机cracker 洗胶机washing mill, washer 精炼机refining mill, refiner 辊距nip, gap 辊隙nip, gap
机械专业英语词汇汇总
机械专业英语词汇（大全） 金属切削metal cutting 机床machine tool 金属工艺学technology of metals 刀具cutter 摩擦friction 联结link 传动drive/transmission 轴shaft 弹性elasticity 频率特性frequency characteristic 误差error 响应response 定位allocation 机床夹具jig 动力学dynamic 运动学kinematic 静力学static 分析力学analyse mechanics 拉伸pulling 压缩hitting 剪切shear 扭转twist 弯曲应力bending stress 强度intensity 三相交流电three-phase AC 磁路magnetic circles 变压器transformer 异步电动机asynchronous motor 几何形状geometrical 精度precision 正弦形的sinusoid 交流电路AC circuit 机械加工余量machining allowance 变形力deforming force 变形deformation 应力stress 硬度rigidity 热处理heat treatment 退火anneal 正火normalizing 脱碳decarburization 渗碳carburization 电路circuit 半导体元件semiconductor element 反馈feedback 发生器generator 直流电源DC electrical source 门电路gate circuit 逻辑代数logic algebra 外圆磨削external grinding 内圆磨削internal grinding 平面磨削plane grinding 变速箱gearbox 离合器clutch 绞孔fraising 绞刀reamer 螺纹加工thread processing 螺钉screw 铣削mill 铣刀milling cutter 功率power 工件workpiece 齿轮加工gear mechining 齿轮gear 主运动main movement 主运动方向direction of main movement 进给方向direction of feed 进给运动feed movement 合成进给运动resultant movement of feed 合成切削运动resultant movement of cutting 合成切削运动方向direction of resultant movement of cutting 切削深度cutting depth 前刀面rake face 刀尖nose of tool 前角rake angle 后角clearance angle 龙门刨削planing 主轴spindle 主轴箱headstock 卡盘chuck 加工中心machining center
(完整版)机械工程专业英语词汇
陶瓷ceramics 合成纤维synthetic fibre 电化学腐蚀electrochemical corrosion 车架automotive chassis 悬架suspension 转向器redirector 变速器speed changer 板料冲压sheet metal parts 孔加工spot facing machining 车间workshop 工程技术人员engineer 气动夹紧pneuma lock 数学模型mathematical model 画法几何descriptive geometry 机械制图Mechanical drawing 投影projection 视图view 剖视图profile chart 标准件standard component 零件图part drawing 装配图assembly drawing 尺寸标注size marking 技术要求technical requirements 刚度rigidity 内力internal force 位移displacement 截面section 疲劳极限fatigue limit 断裂fracture 塑性变形plastic distortion 脆性材料brittleness material 刚度准则rigidity criterion 垫圈washer 垫片spacer 直齿圆柱齿轮straight toothed spur gear 斜齿圆柱齿轮helical-spur gear 直齿锥齿轮straight bevel gear 运动简图kinematic sketch 齿轮齿条pinion and rack 蜗杆蜗轮worm and worm gear 虚约束passive constraint 曲柄crank 摇杆racker 凸轮cams
机械专业词汇2
机械专业词汇 速度：Geschwindigkeit 动量：Bewegungsgroesse 摩擦：Reibung 动能：kinetische Energie 碰撞：zusammenstossen 质点：Partikel 抛物线：Parabel 万有引力：Gravitations 定理：Gesetz 光波：lichtwelle 波长：wellenlaenge 波：Welle 横波：Ouerwelle 纵波：laengswelle 场强：Feldstaerke 电势：elektrisches Potenzial 电势差：Potenzialdifferenz 电容：Kapazitaet 反向电流：inverser Strom gegenstrom 结构分析：strukturanalyse 自由度：Freiheitsgrad 转动：drehen 电路：Stromkreis 电压：Spannung 交变电流：wechselstrom 直流电流：Gleichstrom 节点：Gelenk 支路：nebenstrasse Seitenstrasse
电源：Stromquelle 互导：steilheit 互感：Gegeninduktion 电桥：Brueckenschaltung 电桥臂：Bruechenarm 尺寸公差：Toleranz 基本尺寸：grundmass 极限尺寸：Grenzmaass 偏差：Abmass 配合：zusammenspiel 公差带：Toleranz breite 公差带及配合：spielsitz 孔：Loch 轴：Achse 基孔制：Einheitsbohrung 基轴制：Bezugsachse 总和：Gesamtheit 俯视图：Aufsicht 视图：Ansicht 前视图：Vorderansicht 侧视图：Seitenansicht 三维：dreidimensional 切削:spanen schneiden 刀具: Stahl meissel 切削方向:Schnittrichtung 切削液:Schneidwasser 切削加工:Spanende bearbeitung 切削速度:schnittgeschwindigkeit 切削面:schnittflaeche 切削性:schneidbarkeit
石油机械词汇大全
C型胶管(一端带直角弯头）Rubber pipe assembly, C-type(with an elbow, 90°） 上部内防喷器接头(远控) Upper IBOP (remote) 主机防风棚可燃气体探测仪Inflammable gas detector in main equipment shed YM-16-Ⅱ型液压猫头YM-16-Ⅱ Hydraulic Cathead 主发电机组额定功率×台数Rated power X quantity, main generator set 将所有DAQ数据存于硬盘Store all DAQ data on hard disk. 由任式金属硬密封泥浆阀门Mud valve , union type, metal to metal seal 焊拉式金属硬密封泥浆阀门Welding metal seal mud valve 焊接式金属硬密封泥浆闸门Welding metal rigid mud-sealing gate 焊接式金属硬密封泥浆阀门Welded metal hard sealing mud valve 底部压井管线包括四个阀门Kill line(including 4 valves) API阀门DN50组数量API gate valve DN50 union 刹车液压操作系统额定压力Rated hydraulic operation system pressure of brake 金属硬密封泥浆阀门密封件Metal hard seal mud valve sealings 设计符合API4F规范The mast conforms to API 4F 设计符合API9B规范Conforms to API 9B 设计符合API8A规范Conforms to API 8A specification 设计符合API7K规范Conforms to API 7K specifications 柴油发电机组保养配件清单Maintenance parts list of diesel generator set house 司钻控制室及钻井参数仪表Driller's control cabin and drilling parameter instrument 焊接式金属硬密封泥浆阀板Welding metal seal mud valve plate 每个泵上的三个缸可以互换The 3 hydraulic cylinders of every pump can be interchanged. 操作台升降行调节范围6m Console rising and lowering distance is 6m 带传动,以简化减速机构. Belt transmission is adopted, which simplifies the speed-reducing mechanism. 主滚筒尺寸（直径×长度）Main drum size(Dia.×Length) 压力差开关（油气分离器）Pressure difference switch (oil-gas separator) 旋转方向（面向飞轮端视）Rotation direction（facing to flywheel） 橡胶管线1""（约30米）Rubber pipe line1""（About 30 m) 推拉式塑钢窗(钢化玻璃) Slide plastic-steel window (tempered glass) 刹车鼓尺寸（直径×长度）Brake rim size（Dia.×Length） 排出滤网及辅助管路（二）Discharge Filter Screen and Assistant Pipe（2） 空气过滤器滤芯（重负荷）Air filter element(heavy duty) 胶管总成（长度仅供参考）Rubber hose assembly（Length for reference） 电传系统部分（发电机柜）Electric drive system（generator cabinet） 电传系统部分（开关柜）Electric Drive System（Cubicle Switchboard） 打捞震击器（液压上击器）Fishing jar 不锈钢丝护套胶管(横向) Stainless wire jacketed hose(horizontal) 不锈钢丝护套胶管（横向）Stainless wire jacketed hose（cross） （5″钻杆28米立根）(5"drill pipe 28m stand) 四川宏华石油设备有限公司Sichuan Honghua Petroleum Equipment Co., Ltd. 发电、气源房布置各部件图Parts drawing for Generator/air source house 钻井液管汇通径/额定压力Drilling fluid manifold bore size / rated pressrue
机械工程专业英语单词
Lesson 1 Basic Concepts in M e c h a n i c s机械学的基本概念mechanics n.力学 modify v.修改，调解，变更manageable a.可控制【管理】的incline v.（使）倾斜 ramp n.斜板，斜坡【道】slope v.（使）倾斜 friction n.摩擦 roll v.滚动 multiplier n.放大器，乘法器broom n.扫帚 convert v.转变【化】 handle n.手柄【把】 sweep v.扫荡【描】，掠过efficiency n.效率 gauge vt.测【计】量，校验bearing n.轴承 ideal mechanical advantage 理想的机械效益 neglect vt.忽略Lesson 2 Basic Assumption in Plasticity Theory 塑性理论的基本假设 assumption n.假定 plasticity n.塑性 investigate v.调查，研究deformation n.变形 metal forming process 金属成型工艺【过程】 strain (rate) n.应变【速率】strength n.强度 stress n.应力 yield stress 屈服应力 flow stress 流动应力 tensile stress 拉【伸】应力compressive stress 压【缩】应力shear stress 剪【切】应力geometry n.几何形状 elastic a.弹性的 springback n.回弹 bending n.弯曲，折弯
机械专业术语(大全)
机械专业术语（英语）大全 机械专业术语，中英文对照！ 阿基米德蜗杆 Archimedes worm 安全系数 safety factor; factor of safety 安全载荷 safe load 凹面、凹度 concavity 扳手 wrench 板簧 flat leaf spring 半圆键 woodruff key 变形 deformation 摆杆 oscillating bar 摆动从动件 oscillating follower 摆动从动件凸轮机构 cam with oscillating follower 摆动导杆机构 oscillating guide-bar mechanism 摆线齿轮 cycloidal gear 摆线齿形 cycloidal tooth profile 摆线运动规律 cycloidal motion 摆线针轮 cycloidal-pin wheel 包角 angle of contact 保持架 cage 背对背安装 back-to-back arrangement 背锥 back cone ； normal cone 背锥角 back angle 背锥距 back cone distance 比例尺 scale 比热容 specific heat capacity 闭式链 closed kinematic chain 闭链机构 closed chain mechanism 臂部 arm 变频器 frequency converters 变频调速 frequency control of motor speed 变速 speed change 变速齿轮 change gear ; change wheel 变位齿轮 modified gear 变位系数 modification coefficient 标准齿轮 standard gear 标准直齿轮 standard spur gear 表面质量系数 superficial mass factor 表面传热系数 surface coefficient of heat transfer
机械设计及生产常用专业英语单词
机械设计及生产常用专业英语单词 Assembly line 组装线 Layout 布置图 Conveyer 流水线物料板 Rivet table 拉钉机 Rivet gun 拉钉枪 Screw driver 起子 Pneum atic screw driver 气动起子worktable 工作桌 OOBA 开箱检查 fit together 组装在一起 fasten 锁紧(螺丝) fixture 夹具(治具) pallet 栈板 barcode 条码 barcode scanner 条码扫描器 fuse together 熔合 fuse machine热熔机 repair修理 operator作业员 QC品管 supervisor 课长 ME 制造工程师 MT 制造生技 cosmetic inspect 外观检查 inner parts inspect 内部检查 thumb screw 大头螺丝 lbs. inch 镑、英寸 EMI gasket 导电条 front plate 前板 rear plate 后板 chassis 基座 bezel panel 面板 power button 电源按键 reset button 重置键 Hi-pot test of SPS 高源高压测试Voltage switch of SPS 电源电压接拉键sheet metal parts 冲件 plastic parts 塑胶件 SOP 制造作业程序 material check list 物料检查表 work cell 工作间 trolley 台车
sub-line 支线 left fork 叉车 personnel resource departm ent 人力资源部 production departm ent生产部门 planning department企划部 QC Section品管科 stamping factory冲压厂 painting factory烤漆厂 molding factory成型厂 common equipment常用设备 uncoiler and straightener整平机 punching machine 冲床 robot机械手 hydraulic machine油压机 lathe车床 planer |plein|刨床 miller铣床 grinder磨床 linear cutting线切割 electrical sparkle电火花 welder电焊机 staker=reviting machine铆合机 position职务 president董事长 general manager总经理 special assistant manager特助 factory director厂长 department director部长 deputy manager | =vice manager副理 section supervisor课长 deputy section supervisor =vice section superisor副课长group leader/supervisor组长 line supervisor线长 assistant manager助理 to move, to carry, to handle搬运 be put in storage入库 pack packing包装 to apply oil擦油 to file burr 锉毛刺 final inspection终检 to connect material接料 to reverse material 翻料 wet station沾湿台
机械类专业词汇表
机械类专业词汇表2 Piping work: 铺管工程Steam trace: 加热蒸汽管道Cutting: 切割socket weld 承插焊接fillet weld 角焊,填角焊branch connection 分支接续fabricati on tolera nee.制造容差local heat treatment 局部热处理threaded pipe 螺纹管seal weldi ng.密圭寸焊接flange joint 凸缘接头undercut 底切feeder馈电线conduit outlet 电线引出口seal fitting 密圭接头, 密圭配件Screw thread lubrica nt 螺纹润滑剂Seal: 绝缘层weld reinforcement 焊缝补强lock washer 锁紧［止动, 防松］垫圈electrical panel.配电板，配电盘nipple 螺纹接头zinc plated.镀锌的ring joint 环接, 围缘接合bolt 螺栓control: 控制器 National Electrical Code 全国电气规程 master schedule 主要图表, 综合图表, 设计任务书, 主要作业表torque wrench 转矩扳手job site 施工现场flange conn ecti on.凸缘联接 Hard hat：安全帽 Goggles：护目镜stockpile 贮存packing list 装箱单crate: 柳条箱purchased material list 原材料进货单back-feed 反馈wire coil 线盘，线卷，NPT thread. 美国标准锥管螺纹cable gland 电缆衬垫terminal block 线弧, 接头排接线盒, 接线板, 线夹power drill 机械钻connector. 接线器in sulated sleeve 绝缘套管wire connector 接线器wire terminal 电线接头control wiring 控制线路motor lead 电动机引出线power wiring 电力布线ten der docume n t 提供证件orifice plate. 挡板nut 螺母flange gasket 法兰垫片dimensional inspection 尺寸检验burn through 烧蚀pipi ng system .管道系统reinforcement of weld 加强焊缝fabrication. 制造dye penetrant exam in ati on染料渗透试验法magnetic particle examination 磁粉检验girth weld 环形焊缝cement lined piping 水泥衬里weld joint 焊缝, 焊接接头spool drawing 管路图, 管路详图spot test 抽查, 当场测试butt weld 对接焊缝 Ran dom Radiography随机射线照相检查radiographic
常用机械英语单词
金属切削metal cutting 机床machine tool 金属工艺学technology of metals 刀具cutter 摩擦friction 联结link 传动drive/transmission 轴shaft 弹性elasticity 频率特性frequency characteristic 误差error 响应response 定位allocation 机床夹具jig 动力学dynamic 运动学kinematics 静力学static 分析力学analysis mechanics 拉伸pulling 压缩hitting 剪切shear 扭转twist 弯曲应力bending stress 强度intensity 三相交流电three-phase AC 磁路magnetic circles 变压器transformer 异步电动机asynchronous motor 几何形状geometrical 精度precision 正弦形的sinusoid 交流电路AC circuit 机械加工余量machining allowance 变形力deforming force 变形deformation应力stress 硬度rigidity 热处理heat treatment 退火anneal 正火normalizing 脱碳decarbonization 渗碳carboniz ation 电路circuit 半导体元件semiconductor element 反馈feedback 发生器generator 直流电源DC electrical source 门电路gate circuit 逻辑代数logic algebra 外圆磨削external grinding 内圆磨削internal grinding
机械专业相关词汇中英文翻译大全
机械专业相关词汇中英文翻译大全 单价unit price 工日合计Man-day total/work-day total 人工费cost of labor 材料费materials expenses 机械的mechanical 检查接线connection test 发电机generator 调相机phase regulator 周波cycle 减负荷装置 load-shedding equipment 断路器柜circuit breaker cabinet 单母线single busbar 互感器transformer 每相电流Current by Phase 封闭式插接close type socket joint 发电机控制面板generator control panel 分级卸载sorted unloading 同步控制synchronization control 调速器 speed governor 信号屏signal screen 继电器relay 高压柜high pressure cabinet 油浸电力变压器oil-immersed power transformer 空气断路器air circuit breaker 控制屏control panel 直流馈电屏direct current feed control panel 电容器electric condenser 计量盘metering panel 成套配电箱whole set of distribution box 落地式floor model 控制开关Control switches 铜芯电力电缆Copper core power cable 控制电缆actuating cable 热缩式电力电缆终端头pyrocondensation power cable terminal 钢结构支架配管steel structure bracket tubing 万用槽钢versatile U-steel 电缆托架 cable bracket 钢制托盘式桥架steel Tray-type cable support system waterproof socket 防水插座 防爆插座Explosion-proof socket 接地绞线earthing twisted pair 接地母线 earthing bus
机械词汇
Unit 1 Mechanical Engineering mechanical engineering机械工程（学） steam engine蒸汽机 trial and error试错法 capital cost基建费 machines for the production of goods商品机械 rate of production生产率 operating cost生产成本 control system控制系统 conveyor输送机；运输装置，传送器 manufacturing process生产工艺 batch production批量生产 three-shift三班制 machines for the production of power动力机械 thermal efficiency热效率 steam turbine蒸汽涡轮机 associated large steam engine联合蒸汽锅炉 power plant发电厂 nuclear power station核电站 internal combustion engine内燃机 Bioengineering生物工程 artificial limbs人造肢体 artificial spare-part surgery人体器官移植 environmental control环境控制 reversed heat engine反向热引擎 side effect副作用 dynamics动力学 vibration振动 automatic control自动控制 thermodynamics热力学 heat transfer热传递 lubrication润滑 properties of material材料特性 synthesize人工合成 operations research运筹学 value engineering工程经济学 PABLA (problem analysis by logical approach)逻辑发问题分析exponential指数 long-term social effect长期社会效益 Unit 2 Machine Parts fastener联接件 nail钉子 screw螺钉 nut螺帽 bolt螺栓