Doc. No.: 2014080689
MSG22S Capacitive Touch Panel Controller
Preliminary Product Brief Version 0.1
Doc. No.: 2014080689
? 2014 MStar Semiconductor, Inc. All rights reserved.
MStar Semiconductor makes no representations or warranties including, for example but not limited to, warranties of merchantability, fitness for a particular purpose, infringement of any intellectual property right or the accuracy or completeness of this document, and reserves the right to make changes without further notice to any products herein to improve reliability, function or design. No responsibility is assumed by MStar Semiconductor arising out of the application or user of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others.
MStar is a trademark of MStar Semiconductor, Inc. Other trademarks or names herein are only for identification purposes only and owned by their respective owners.
Preliminary Product Brief Version 0.1 Doc. No.: 2014080689
REVISION HISTORY
Revision No. Description Date
0.1 ?Initial release 08/20/2014
FEATURES
n Capacitive Touch Screen Controller
?Supports up to 24 sensors
?Supports screen size up to 3.2”
?X, Y resolution up to 2048 pixels x 2048 pixels ?Programmable reporting rate: up to 120Hz
?Accurate single-touch coordinate report and two-touch gesture
?Automatic background capacitance tracking
?14-bit ADC
?Supports waterproof and wet-finger tracking ?Enhance immunity to RF interference and AC charger noise
?Supports proximity function
?Supports full lamination and on-cell structure ?Supports gesture wake up: double click/ handwritten wake up defined by user.
?Supports glove mode
-Material: downy & cotton
-Thickness: max. 1.8mm
?Single input power n Hardware
?32-bit MCU
?Flash memory & SRAM embedded
?I2C slave interface, up to 400Kb/s
?Built-in oscillator
?Build in 1.2V LDO for digital circuit
?Programmable INT level: 1.2V, 1.5V, 1.8V,and VDD
n Operation Voltage
? 2.8V ~ 3.3V
?All sensor pins pass HBM/8KV, MM/800V
n Misc.
?UQFN-32 package
GENERAL DESCRIPTION
The MSG22S is a capacitive touch screen controller. The internal ADC & DSP circuitry implement high-accuracy self-capacitance measurement. A 32-bit MCU with embedded flash provides programmability to suffice different requirements of various touch screen designs.
BLOCK DIAGRAM Doc. No.: 2014080689
PIN DIAGRAM (MSG22S)
Pin 1
8
765432
1
19
1817
24
23222120SCL CHIP_EN
VDD PVDD_CP SDA INT VDD_12CAP_SENSE09CAP_SENSE08CAP_SENSE07
CAP_SENSE14CAP_SENSE13CAP_SENSE12CAP_SENSE11CAP_SENSE10PVDD_CPA
Doc. No.: 2014080689
PIN DESCRIPTION
Capacitive Touch Sensor Interface
Pin Name Pin Type Function Pin CAP_SENSE00 Analog Input Capacitive touch sensor input 10 CAP_SENSE01 Analog Input Capacitive touch sensor input 11 CAP_SENSE02 Analog Input Capacitive touch sensor input 12 CAP_SENSE03 Analog Input Capacitive touch sensor input 13 CAP_SENSE04 Analog Input Capacitive touch sensor input 14 CAP_SENSE05 Analog Input Capacitive touch sensor input 15 CAP_SENSE06 Analog Input Capacitive touch sensor input 16 CAP_SENSE07 Analog Input Capacitive touch sensor input 17 CAP_SENSE08 Analog Input Capacitive touch sensor input 18 CAP_SENSE09 Analog Input Capacitive touch sensor input 19 CAP_SENSE10 Analog Input Capacitive touch sensor input 20 CAP_SENSE11 Analog Input Capacitive touch sensor input 21 CAP_SENSE12 Analog Input Capacitive touch sensor input 22 CAP_SENSE13 Analog Input Capacitive touch sensor input 23 CAP_SENSE14 Analog Input Capacitive touch sensor input 24 CAP_SENSE15 Analog Input Capacitive touch sensor input 25 CAP_SENSE16 Analog Input Capacitive touch sensor input 26 CAP_SENSE17 Analog Input Capacitive touch sensor input 27 CAP_SENSE18 Analog Input Capacitive touch sensor input 28 CAP_SENSE19 Analog Input Capacitive touch sensor input 29 CAP_SENSE20 Analog Input Capacitive touch sensor input 30 CAP_SENSE21 Analog Input Capacitive touch sensor input 31 GR1 Analog Input /Output Capacitive touch sensor input /Guard ring driver output 9
GR2/ EXT_CLK Analog Input/Output /
Digital input
Capacitive touch sensor input /Guard ring driver output
External Sync Clock Input
32
Host Interface
Pin Name Pin Type Function Pin CHIP_EN Input w/ 5V-tolerant Chip Enable 5 SDA I/O w/ 5V-tolerant I2C Serial Data Input/Output 1 SCL I/O w/ 5V-tolerant I2C Serial Clock Input/Output 2 INT I/O w/ 5V-tolerant Interrupt signal 3 Doc. No.: 2014080689
Doc. No.: 2014080689
Power Pins
Pin Name Pin Type Function Pin
6 VDD 2.8V Power 2.8V~3.3V power supply; connect 1uF X5R ceramic
capacitor to Ground
4 VDD_12 1.2V Power Internally generated digital power supply; connect 1uF X5R
ceramic capacitor to Ground
PVDD_CP High Voltage Power Internally Generated High Voltage Power Supply, Connect
7
1uF X5R ceramic capacitor to Ground.
PVDD_CPA High Voltage Power Short to PVDD_CP8 Note: E-pad should be connected to system GND net.
Doc. No.: 2014080689
ELECTRICAL SPECIFICATIONS
Parameter Min Typ Max Unit DIGITAL INPUTS
Input Voltage 1, High (V IH1)1 1 V Input Voltage 2, High (V IH2)2V PVDD_CPA - 0.4 V Input Voltage, Low (V IL) 0.5 V DIGITAL OUTPUTS
See Note3 V Output Voltage, High (V OH1)3
Output Voltage, High (V OH2)4V VDD - 0.1
Output Voltage, Low (V OL) 0.1 V Specifications are subjected to change without notice.
Notes:
1.V IH1 includes pins CHIP_EN, SDA, SCL, INT.
2.V IH2 refers to pin EXT_CLK.
3.V OH1 is for INT output voltage level which is programmable by registers. Typical values are 1.2V/1.5V/1.8V/V VDD.
4.V OH2 refers to other digital pins.
Recommended Operating Conditions
Parameter Symbol Min Typ Max Unit Power Supply V VDD 2.8 3.3 V Ambient Operating Temperature T A-20 85 °C Junction Temperature T J125 °C Absolute Maximum Ratings
Parameter Symbol Min Typ Max Unit Power Supply V VDD 3.6 V Analog Input Voltage V INANA V VDD V Digital Input Voltage1T INDIG 5 V Storage Temperature T STG-40 125 °C Notes:
1.Except for the pin EXT_CLK, the maximum voltage for other digital pins is 5V as the table listed.
2.Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. This is a stress
rating only and does not imply functional operation of the device. Exposure to absolute maximum ratings for extended periods may affect device reliability.
ORDERING GUIDE
Part Number Temperature
Range Package
Description
Package
Option
MSG22S -20°C to +85°C UQFN
32
MARKING INFORMATION
MSG22S
Operation Code B
Date Code (YYWW)
Lot Number
Operation Code A
Part Number
DISCLAIMER
MSTAR SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. NO RESPONSIBILITY IS ASSUMED BY MSTAR SEMICONDUCTOR ARISING OUT OF THE APPLICATION OR USER OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
Electrostatic charges accumulate on both test equipment and human body and can discharge without
detection. MSG22S comes with ESD protection circuitry; however, the device may be permanently
damaged when subjected to high energy discharges. The device should be handled with proper ESD
precautions to prevent malfunction and performance degradation.
Doc. No.: 2014080689
MECHANICAL DIMENSIONS
A
b e
E2
1
D
E
1
32
D2
8
9
16
17
24
2532
Symbol
Millimeter Inch
Min. Nom. Max. Min. Nom. Max.
A 0.55 0.6 0.65 0.022 0.024 0.026
D 3.9 4 4.1 0.154 0.157 0.161
E 3.9 4 4.1 0.154 0.157 0.161
D2 2.54 - 2.8 0.100 - 0.110
E2 2.54 - 2.8 0.100 - 0.110
b 0.15 0.2 0.25 0.006 0.008 0.010
e 0.35 0.4 0.45 0.014 0.016 0.018
Doc. No.: 2014080689