HDMI-Compliance-Test-Software-Datasheet
HDMI compliance test software
Option HDM, Option HDM-DS, Option HT3, Option HT3-DS Datasheet
HDMI compliance test software
Engineers designing and validating the HDMI physical layer of their devices face constant pressure to improve efficiency. Designers need to perform a wide range of compliance tests quickly and reliably right on their bench.HDMI 2.0 supports features like 2160p (also known as Ultra HD/4K 2K 60/50 Hz), operating at 5.94 Gcps apart from 4K 2K 4:2:0, using the same Cat 2 cable and HDMI 1.4b connector. HDMI 1.4a/b introduces Automotive HDMI (Type E) in addition to Mobile HDMI (Type D), HEAC, 3D HDMI, 4K ×2K patterns, and new Calorimetric patterns, all operating up to 3.4 Gb/s.
Option HDM and HDM-DS Advanced Analysis and Compliance Software automates a comprehensive range of tests as per CTS 2.0. TDSHT3 and HT3-DS HDMI Compliance Test Software automate a comprehensive range of tests as per CTS 1.4b - enabling unprecedented efficiency with reliable results. HDMI 1.4b compliance testing is a PREREQUISITE for HDMI 2.0 testing.
Key features
Conformance to HDMI 2.0 Compliance Test Specification (CTS)Introducing the innovative HDMI protocol analyzer solution for HDMI 1.4b
One-box solution for HDMI 1.4b physical-layer and protocol-layer testing
Fast, efficient direct synthesis solution
Conformance to HDMI 1.4a/b Standards and Compliance Test Specification 1.4a/b (CTS)
Complete validation to standards with wide range of tests for source,sink, and cable devices
Accurate source tests using precise measurement techniques Dependable sink tests with closed-loop measurements that eliminate nonlinearities in test setup
Automation of complex sink and cable tests with remote control of signal sources and software emulation of cable effects, eliminating the need for hardware transition time converters (TTC) and cable emulators
Quick results with automatic mask fit, measurements and Pass/Fail notification, and in-depth results with statistical analysis and mask margins
Quick testing with one-button selection of multiple tests and CSV-format test summary and reports
Comprehensive HDMI 2.0/1.4a/b solution including test fixtures, DPO/DSA/MSO70000 real-time oscilloscopes, P7313SMA differential
probes, AWG70000/7000 signal sources, HDMI fixtures, and DSA8300sampling oscilloscopes
Applications
Design and validation of HDMI 2.0/1.4a/b physical layer
Reliable and dependable results
Option HDM embeds HDMI forum CTS 2.0 compliance test procedures,ensuring reliable results. TDSHT3 embeds the HDMI CTS 1.4a/b compliance test procedures, including the software clock recovery (SoftCRU), ensuring dependable results. Accurate eye rendering and
precise violation testing deliver credible results. Perform accurate Sink tests with closed-loop measurements that eliminate nonlinearities of the test setup. Authentic measurement techniques and automation eliminate errors to provide repeatable results.
Faster validation cycles
The unparalleled automation offered on the HDM, HDM-DS, TDSHT3 and HT3-DS enables faster validation. Reduce test times for complete HDMI Sink testing with HDM, HDM-DS, TDSHT3 and HT3-DS by digitally
controlling cable emulator and TTC effects allowing for a single hardware connection for all resolutions. Demonstrate efficiency by using the "Select All" feature to perform multiple tests. Quickly generate CSV-format
summaries or detailed reports at a press of a button.
HDM SW - Source Test
HDM-DS SW - Sink Test
HDM-DS SW - Sink Protocol Test
HT3-DS software
Datasheet
Test descriptions
TEK-PGY-HDMI-PA-SW
Tektronix is pleased to introduce the HDMI protocol analyzer software developed by our third-party partner for our DPO/DSA/MSO70000B/C/D Series real-time oscilloscopes with bandwidth ≥12.5 GHz and above.Salient features include:
One-box solution for both HDMI physical- and protocol-layer testing leveraging real-time oscilloscopes.
Detailed HDMI protocol decodes. Multi-view decode capability:Bus viewer Frame viewer Event viewer Data packet viewer Protocol viewer
Seamless link layer to physical layer analysis and decode capability:Ability to view analog waveform with protocol decode
Common probing technique for physical-layer and protocol-layer testing.
Refer to the Prodigy techno visions website (http://
https://www.sodocs.net/doc/123814812.html, ) for more details on the HDMI protocol analyzer software.
1
Requires record length of more than 16M on each channel. HDMI 2.0 Eye Diagram is at TP2 after cable emulator effect.
HDMI Compliance Test Software - HDM, HDM-DS, HT3, HT3-DS
HDMI Protocol Tests (as per CTS 1.4a/b) Source protocol tests:
7-16 legal codes
7-17 basic protocol
7-18 extended control period
7-19 packet types
7-23/7-24 pixel encoding
7-25 video format timing
7-26 pixel reception
7-27 AVI info frame
Source audio:
7-28 IEC 60958/IEC 61937
7-29 ACR
7-30 audio sample packet jitter
7-31 audio info frame
7-32 audio sample packet interoperability
7-33 source interoperability with DVI
Source advanced features:
7-34 deep color
7-35 gamut metadata transmission
7-36 high bit rate audio
7-37 one-bit audio
7-38 3D video format timing
7-39 4KX2K video format timing – record length dependent
7-40 extended colorimetry transmission
Combined HDMI and MHL protocol solution We are also pleased to announce the availability of the combined HDMI and MHL protocol analyzer software to enable customers who work on both the technologies to leverage a cost-effective protocol software bundle. For details on MHL protocol analyzer software refer to MSR#1992010. The bundled HDMI/MHL protocol analyzer software is a stand-alone option for the Tektronix real-time oscilloscopes with the following nomenclature: TEK-PGY-HDMH-PA-SW.MHL protocol compliance tests (as per CTS 1.1)
Source Protocol Tests:
Legal Codes
Basic Protocol
Packet Types
Source Video
Pixel Encoding
Video Format Timing
Video Quantization Test
AVI Info Frame
Source Audio Tests:
Audio Test
Audio Clock Regeneration Test
Audio Info Frame
Supported Tektronix instruments
Real-time oscilloscopes
DPO/DSA/MSO70000 series real-time oscilloscopes support HDM,
HDM-DS, HT3, HT3-DS, DPOFL-HDM and DPOFL-HDM-DS
Note: The recommended oscilloscope bandwidth for HDMI 2.0 is
≥16 GHz. Although a 12.5 GHz bandwidth oscilloscope is supported, it will have as much as a 10% inaccuracy in test results.
Sampling oscilloscopes
TDR tests: DSA8300 oscilloscope with 80E03 and 80E04 modules
Generators (using direct synthesis method)
AWG70002A with Opt. 02, Opt. 225 and Opt. 03 (sequencing option) (Qty: 2), or AWG7122B/C with Opt. 01, Opt. 02/06 and Opt. 08 (Qty: 2) AFG3102/C or AFG3252/C - Used for synchronizing and triggering the
2 AWGs in the direct synthesis setup
Datasheet
HDMI Compliance Test Software - HDM, HDM-DS, HT3, HT3-DS Ordering information
HDM test software
Test software includes:Application CD, HDMI direct synthesis AWG patterns DVDs, and electronic documentation.
Software options
To order with oscilloscope
Product/feature Description
Option HDM HDMI 2.0 Advanced Analysis and Compliance Software for Source testing.
(Prerequisite for HDMI 2.0 is HDMI 1.4b testing; hence HT3 is required.
Prerequisite is Option DJA, Opt 10XL (required for 100M RL), Opt SR-EMBD and
SR-CUST).
Option HDM-DS HDMI 2.0 Advanced Analysis and Compliance Software for Sink testing
(Prerequisite HDM and HT3-DS). Since HDMI 1.4b is a prerequisite for HDMI
2.0 testing, HT3-DS is needed.
Option HT3HDMI 1.4b Compliance Test Software
Option HT3-DS HDMI 1.4b Direct Synthesis Software (requires Opt. HT3)
TEK-PGY-HDMI-PA-SW HDMI 1.4b - only Protocol Analyzer Software (requires Option 20XL and (4)
P7313SMA probes)
TEK-PGY-HDMH-PA-SW Combined HDMI 1.4b and MHL Protocol Analyzer Software (requires Option 20XL,
and (4) P7313SMA probes for HDMI protocol testing or (2) P7313SMA and (1)
P7240 probes for MHL protocol testing)
DPOFL-HDM Advanced Analysis and Compliance Software for HDMI 2.0 Tx floating license DPOFL-HDM DS Advanced Analysis and Compliance Software for HDMI 2.0 Rx floating license DPOFT-HDM Advanced Analysis and Compliance Software for HDMI 2.0 Tx floating license (trial
version)
DPOFT-HDM DS Advanced Analysis and Compliance Software for HDMI 2.0 Rx floating license (trial
version)
Software upgrades
To upgrade an existing oscilloscope
Product/feature Description
DPO/DSA/MSO70000Order DPO-UP – Opt. HDM
DPO/DSA/MSO70000Order DPO-UP – Opt. HDM-DS
DPO/DSA/MSO70000Order DPO-UP – Opt. HT3
DPO/DSA/MSO70000Order DPO-UP – Opt. HT3-DS 2
TEK-PGY-HDMI-PA-SW HDMI-only Protocol Analyzer Software (requires Option 20XL and (4) P7313SMA
probes)
TEK-PGY-HDMH-PA-SW Combined HDMI and MHL Protocol Analyzer Software (requires Option 20XL, and
(4) P7313SMA probes for HDMI protocol testing or (2) P7313SMA and (1) P7240
probes for MHL protocol testing)
Note: The recommended oscilloscope bandwidth for performing both physical-layer and protocol-layer testing using the same oscilloscope is ≥12.5 GHz, as the protocol analyzer software requires the 20XL record length option.
2HT3-DS is available on DPO/DSA/MSO70000 series scopes with bandwidth greater than 8 GHz.
Recommended equipment and accessories
Accessory Description
Oscilloscope16M Record Length / Ch or more - Opt. 2XL on DPO/DSA/MSO70000
oscilloscopes (for eye diagram and jitter tests)
250M Record Length / Ch - Opt. 20XL on DPO/DSA/MSO70000 oscilloscopes (for
protocol analysis)
100M Record Length Opt 10XL (needed for HDMI 2.0)
Option DJA, Opt SR-EMBD and SR-CUST (also needed as a pre-requisite for HDM
Software)
Signal sources AWG70002A with opt 01, 03 and 225 or AWG7122B/C with option 01, 02/06, and
08 (for direct synthesis method)
Probes
Differential probes P7350SMA (2 probes required) - for testing TMDS clock rates less than or equal to
74.25 MHz
Minimum two P7313SMA probes are required for testing all resolutions of HDMI
1.4a/b testing, and are also used for single-ended testing.
Minimum 3 probes are recommended for HDMI 2.0 testing and are also used for
single-ended testing.
Four P7313SMA probes are recommended for faster physical layer testing of all
4 HDMI 1.4 and HDMI 2.0 channels.
Four P7313SMA probes are required for protocol analysis.
Active probes P7240 used with old 1.2 test fixtures (2 probes required); P7313SMA probes can
also be used to test single-ended tests using 50 ? short.
Probe positioner PPM100 flexible arm probe positioner
HDMI direct synthesis accessory kit (required with Option HT3-DS and Option HDM-DS)Consists of:
Matched SMA cables (174-4944-xx) (Qty: 10)
BNC cables (012-0057-xx) (Qty: 4)
BNC-T adapter (015-1016-xx) (Qty: 1)
Bias tees from Mini-Circuits (ZX85-12G-S+) (Qty: 8)
TTC filter from Picosecond pulse labs (5915-110-120PS) (Qty: 8) GPIB cables from NI (763061-xx)
6 dB attenuator from Mini-Circuits (BW-S6W2+) (Qty: 8)
External power supply PWS4205 for providing bias voltage during Sink testing or optionally powering the
fixture during source testing
Additional recommended accessories for HDMI 2.0 Delay line for introducing 112 ps skew from SPECTRUM (8001-SM21-02) (Qty: 6)
Delay line for introducing 0.15 Tbit skew from Carlisle Interconnect Technologies
(5018CCSF, SMA (M) to (F))(Qty: 6)
Additional recommended accessories for impedance test50 ohm male terminations (015-1022-01) - (Qty: 6)
50 ohm female terminations (015-1004-01) - (Qty: 2)
50 ohm SMA cable, 1 M length from HUBER+SUHNER SUCOFLEX (104PE) -
(Qty: 2)
HDMI 2.0 Fixture Available, please contact Tektronix Local Representative for more details.
Sink test automation 3
NI GPIB-USB-A/B USB-to-GPIB controller (with driver software)
NI GPIB-ENET/100 Ethernet GPIB controller (with driver software)
3For ordering, contact National Instruments (https://www.sodocs.net/doc/123814812.html,).
Datasheet
HDMI Compliance Test Software - HDM, HDM-DS, HT3, HT3-DS
HDMI 1.4b type A fixtures
TF-HDMI-TPA-S Test Adapter Set (used for Source, Sink, and Cable test) includes the following:
TF-HDMI-TPA-P plug fixture
TF-HDMI-TPA-CE EDID board with EDID EEPROM
TF-HDMI-TPA-STX Test Adapter Set (used for Source and Sink test) includes the following:
TF-HDMI-TPA-P plug fixture
TF-HDMI-TPA-R receptacle fixtures (Qty: 2)
Calibration fixture
TF-HDMI-TPA-CE EDID board with EDID EEPROM
HDMI 1.4b type C fixtures
TF-HDMIC-TPA-S Test Adapter Set (used for Source, Sink, and Cable testing) includes the following:
TF-HDMIC-TPA-P plug fixture
TF-HDMIC-TPA-R receptacle fixtures (Qty. 2)
Calibration fixture
TF-HDMI-TPA-CE EDID board with EDID EEPROM
TF-HDMIC-TPA-STX Test Adapter Set (used for Source testing only) includes the following:
TF-HDMIC-TPA-P plug fixture
TF-HDMI-TPA-CE EDID board with EDID EEPROM
HDMI 1.4b type D fixtures
TF-HDMID-TPA-P Plug Board
TF-HDMID-TPA-R Receptacle Board
TF-HDMI-TPA-CE consisting of (to be ordered separately):
EDID Fixture PCBA
EEPROM with HDMI 1.4a/b Software
Ribbon Cable (174-5746-xx)
Customer Documentation
HDMI 1.4b type E fixtures
TF-HDMIE-TPA-KIT Test Adapter Kit (used for Source, Sink, and Cable testing) includes the following:
1 TF-HDMIE-TPA-P plug board
2 TF-HDMIE-TPA-R receptacle boards
TF-HDMI-TPA-CE consisting of (to be ordered separately):
EDID Fixture PCBA
EEPROM with HDMI 1.4a/b Software
Ribbon Cable (174-5746-xx)
Customer Documentation
TF-HDMI-TPA-STX
TF-HDMID-TPA-P/R
TF-HDMI-TPA-T
Datasheet
Tf-HDMIE-TPA-KIT
Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.
Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats.
HDMI Compliance Test Software - HDM, HDM-DS, HT3, HT3-DS
Datasheet
ASEAN / Australasia (65) 6356 3900 Austria 00800 2255 4835*Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Belgium 00800 2255 4835*Brazil +55 (11) 3759 7627 Canada 1 800 833 9200
Central East Europe and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401
Finland +41 52 675 3777 France 00800 2255 4835*Germany 00800 2255 4835*
Hong Kong 400 820 5835 India 000 800 650 1835 Italy 00800 2255 4835*
Japan 81 (3) 6714 3010 Luxembourg +41 52 675 3777 Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90
Middle East, Asia, and North Africa +41 52 675 3777 The Netherlands 00800 2255 4835*Norway 800 16098
People's Republic of China 400 820 5835 Poland +41 52 675 3777 Portugal 80 08 12370
Republic of Korea 001 800 8255 2835 Russia & CIS +7 (495) 6647564 South Africa +41 52 675 3777
Spain 00800 2255 4835*Sweden 00800 2255 4835*Switzerland 00800 2255 4835*
Taiwan 886 (2) 2722 9622 United Kingdom & Ireland 00800 2255 4835*USA 1 800 833 9200
* European toll-free number. If not accessible, call: +41 52 675 3777 Updated 10 April 2013 For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit https://www.sodocs.net/doc/123814812.html,. Copyright ? Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and
price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.
04 Dec 2014 61W-28296-1 https://www.sodocs.net/doc/123814812.html,