烽火2008交换机poe简单供电开启(完整版)

Username: admin
Password: 12345
S2800#config

S2800(config)#interface fastethernet 1/1 to fastethernet 1/24
S2800(config-fe1/1->fe1/24)#pse enable
Interface FastEthernet1/5 LinkUP

Interface Vlan1 LinkUP

Interface FastEthernet1/5 LinkDown

Interface Vlan1 LinkDown

Interface FastEthernet1/5 LinkUP

Interface Vlan1 LinkUP

Interface FastEthernet1/5 LinkDown

Interface Vlan1 LinkDown

S2800(config-fe1/1->fe1/24)#
Interface FastEthernet1/5 LinkUP

Interface Vlan1 LinkUP //停止后回车

S2800(config-fe1/1->fe1/24)#quit //退出

S2800(config）#quit //退出

S2800#writ file
This will save the configuration in the flash memory.
Are you sure?(y/n) [y]y
Building configuration,please wait for a moment.....

[OK]
S2800#

S2800#show pse interface
If Admin Power-management PowerPri DetectStatus PowerClass CurrentPower(mW) Descr
fe-1/1 enable auto low deliveringPower class4 3900 -
fe-1/2 enable auto low searching unknown 0 -
fe-1/3 enable auto low searching unknown 0 -
fe-1/4 enable auto low searching unknown 0 -
fe-1/5 enable auto low searching unknown 0 -
fe-1/6 enable auto low searching unknown 0 -
fe-1/7 enable auto low searching unknown 0 -
fe-1/8 enable auto low searching unknown 0 -
fe-1/9 enable auto low searching unknown 0 -
fe-1/10 enable auto low searching unknown 0 -
fe-1/11 enable auto low searching unknown 0 -
fe-1/12 enable auto low searching unknown 0 -
fe-1/13 enable auto low searching unknown 0 -
fe-1/14 enable auto low searching unknown 0 -
fe-1/15 enable auto low searching unknown 0 -
fe-1/16 enable auto low searching unknown 0 -
fe-1/17 enable auto low searching unknown 0 -
fe-1/18 enable auto low searching unknown 0 -
fe-1/19 enable auto low searching unknown 0 -
fe-1/20 enable auto low searching unknown 0 -
fe-1/21 enable auto l

ow searching unknown 0 -
fe-1/22 enable auto low searching unknown 0 -
fe-1/23 enable auto low searching unknown 0 -
fe-1/24 enable auto low searching unknown 0 -