EI会议论文格式模版

Paper Title Subtitle as needed

Authors Name/s per 1st Affiliation (Author) line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptable

line 3: City, Country

line 4: e-mail: name@https://www.sodocs.net/doc/106604637.html, Authors Name/s per 2nd Affiliation (Author) line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptable

line 3: City, Country

line 4: e-mail: name@https://www.sodocs.net/doc/106604637.html,

Abstract—This electronic document is a “live” template. The various components of your paper [title, text, heads, etc.] are already defined on the style sheet, as illustrated by the portions given in this document. DO NOT USE SPECIAL CHARACTERS, SYMBOLS, OR MATH IN YOUR TITLE OR ABSTRACT. (Abstract)

Keywords-component; formatting; style; styling; insert (key words)

I.I NTRODUCTION (H EADING 1)

All manuscripts must be in English. These guidelines include complete descriptions of the fonts, spacing, and related information for producing your proceedings manuscripts. Please follow them and if you have any questions, direct them to the production editor in charge of your proceedings at Conference Publishing Services (CPS): Phone +1 (714) 821-8380 or Fax +1 (714) 761-1784.

This template provides authors with most of the formatting specifications needed for preparing electronic versions of their papers. All standard paper components have been specified for three reasons: (1) ease of use when formatting individual papers, (2) automatic compliance to electronic requirements that facilitate the concurrent or later production of electronic products, and (3) conformity of style throughout a conference proceedings. Margins, column widths, line spacing, and type styles are built-in; examples of the type styles are provided throughout this document and are identified in italic type, within parentheses, following the example. PLEASE DO NOT RE-ADJUST THESE MARGINS. Some components, such as multi-leveled equations, graphics, and tables are not prescribed, although the various table text styles are provided. The formatter will need to create these components, incorporating the applicable criteria that follow.

II.T YPE S TYLE AND F ONTS

Wherever Times is specified, Times Roman or Times New Roman may be used. If neither is available on your word processor, please use the font closest in appearance to Times. Avoid using bit-mapped fonts if possible. True-Type 1 or Open Type fonts are preferred. Please embed symbol fonts, as well, for math, etc.

III.E ASE OF U SE

A.Selecting a Template (Heading 2)

First, confirm that you have the correct template for your paper size. This template has been tailored for output on the US-letter paper size. If you are using A4-sized paper, please close this template and download the file for A4 paper format called ―CPS_A4_format‖.

B.Maintaining the Integrity of the Specifications

The template is used to format your paper and style the text. All margins, column widths, line spaces, and text fonts are prescribed; please do not alter them. You may note peculiarities. For example, the head margin in this template measures proportionately more than is customary. This measurement and others are deliberate, using specifications that anticipate your paper as one part of the entire proceedings, and not as an independent document. Please do not revise any of the current designations.

IV.P REPARE Y OUR P APER B EFORE S TYLING Before you begin to format your paper, first write and save the content as a separate text file. Keep your text and graphic files separate until after the text has been formatted and styled. Do not use hard tabs, and limit use of hard returns to only one return at the end of a paragraph. Do not add any kind of pagination anywhere in the paper. Do not number text heads-the template will do that for you.

Finally, complete content and organizational editing before formatting. Please take note of the following items when proofreading spelling and grammar:

A.Abbreviations and Acronyms

Define abbreviations and acronyms the first time they are used in the text, even after they have been defined in the abstract. Abbreviations such as IEEE, SI, MKS, CGS, sc, dc, and rms do not have to be defined. Do not use abbreviations in the title or heads unless they are unavoidable.

Identify applicable sponsor/s here. (sponsors)

B.Units

?Use either SI (MKS) or CGS as primary units. (SI units are encouraged.) English units may be used as

secondary units (in parentheses). An exception

would be the use of English units as identifiers in

trade, such as ―3.5-inch disk drive‖.

?Avoid combining SI and CGS units, such as current in amperes and magnetic field in oersteds. This often

leads to confusion because equations do not balance

dimensionally. If you must use mixed units, clearly

state the units for each quantity that you use in an

equation.

?Do not mix complete spellings and abbreviations of units: ―Wb/m2‖ or ―webers per square meter‖, not

―webers/m2‖. Spell out units when they appear in

text: ―. . . a few henries‖, not ―. . . a few H‖.

?Use a zero before dec imal points: ―0.25‖, not ―.25‖. C.Equations

The equations are an exception to the prescribed specifications of this template. You will need to determine whether or not your equation should be typed using either the Times New Roman or the Symbol font (please no other font). To create multileveled equations, it may be necessary to treat the equation as a graphic and insert it into the text after your paper is styled.

Number equations consecutively. Equation numbers, within parentheses, are to position flush right, as in (1), using a right tab stop. To make your equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. Italicize Roman symbols for quantities and variables, but not Greek symbols. Use a long dash rather than a hyphen for a minus sign. Punctuate equations with commas or periods when they are part of a sentence, as in

α + β = χ. (1)

Note that the equation is centered using a center tab stop. Be sure that the symbols in your equation have been defined before or immediately following the equation. Use ―(1)‖, not ―Eq. (1)‖ or ―equation (1)‖, except at the beginning of a sentence: ―Equation (1) is . . .‖

D.Some Common Mistakes

?The word ―data‖ is plural, not singular.

?The subscript for the permeability of vacuum μ0, and other common scientific constants, is zero with

subscript formatting, not a lowercase letter ―o‖.

?In American English, commas, semi-/colons, periods, question and exclamation marks are located within

quotation marks only when a complete thought or

name is cited, such as a title or full quotation. When

quotation marks are used, instead of a bold or italic

typeface, to highlight a word or phrase, punctuation

should appear outside of the quotation marks. A

parenthetical phrase or statement at the end of a

sentence is punctuated outside of the closing

parenthesis (like this). (A parenthetical sentence is

punctuated within the parentheses.)

? A graph within a graph is an ―inset‖, not an ―insert‖.

The word alternatively is preferred to the word

―alternately‖ (unless you really mean something that

alternates).

?Do not use the word ―essentially‖ to mean ―approximately‖ or ―effectively‖.

?In your paper title, if the words ―that uses‖ can accurately replace the word ―using‖, capitalize the

―u‖; if not, keep using lower-cased.

?Be aware of the different meanings of the homophones ―affect‖ and ―effect‖, ―complement‖

and ―compliment‖, ―discreet‖ and ―discrete‖,

―principal‖ and ―principle‖.

?Do not confuse ―imply‖ and ―infer‖.

?The prefix ―non‖ is not a word; it should be joined to the word it modifies, usually without a hyphen.

?There is no period after the ―et‖ in the Latin abbreviati on ―et al.‖.

?The abbreviation ―i.e.‖ means ―that is‖, and the abbreviation ―e.g.‖ means ―for example‖.

An excellent style manual for science writers is [7].

V.U SING THE T EMPLATE

After the text edit has been completed, the paper is ready for the template. Duplicate the template file by using the Save As command, and use the naming convention prescribed by your conference for the name of your paper. In this newly created file, highlight all of the contents and import your prepared text file. You are now ready to style your paper.

A.Authors and Affiliations

The template is designed so that author affiliations are not repeated each time for multiple authors of the same affiliation. Please keep your affiliations as succinct as possible (for example, do not differentiate among departments of the same organization). This template was designed for two affiliations.

1)For author/s of only one affiliation (Heading 3): To change the default, adjust the template as follows.

a)Selection (Heading 4): Highlight all author and affiliation lines.

b)Change number of columns: Select Format > Columns >Presets > One Column.

c)Deletion: Delete the author and affiliation lines for the second affiliation.

d)For author/s of more than two affiliations: To change the default, adjust the template as follows.

e)Selection: Highlight all author and affiliation lines.

f)Change number of columns: Select Format > Columns > Presets > One Column.

g)Highlight author and affiliation lines of affiliation 1 and copy this selection.

h)Formatting: Insert one hard return immediately after the last character of the last affiliation line. Then paste the copy of affiliation 1. Repeat as necessary for each additional affiliation.

i)Reassign number of columns: Place your cursor to the right of the last character of the last affiliation line of an even numbered affiliation (e.g., if there are five affiliations, place your cursor at end of fourth affiliation). Drag the cursor up to highlight all of the above author and affiliation lines. Go to Format > Columns and select ―2 Columns‖. I f you have an odd number of affiliations, the final affiliation will be centered on the page; all previous will be in two columns.

B.Identify the Headings

Headings, or heads, are organizational devices that guide the reader through your paper. There are two types: component heads and text heads.

Component heads identify the different components of your paper and are not topically subordinate to each other. Examples include Acknowledgments and References and, for these, the correct style to use is ―Heading5‖. Use ―figure

caption‖ for your Figure captions, and ―table head‖ for your table title. Run-in heads, such as ―Abstract‖, will require you to apply a style (in this case, italic) in addition to the style provided by the drop down menu to differentiate the head from the text.

Text heads organize the topics on a relational, hierarchical basis. For example, the paper title is the primary text head because all subsequent material relates and elaborates on this one topic. If there are two or more sub-topics, the next level head (uppercase Roman numerals) should be used and, conversely, if there are not at least two sub-topics, then no subheads should be introduced. Styles named ―Heading 1‖, ―Heading 2‖, ―Heading 3‖, and ―Heading 4‖ are prescribed.

C.Figures and Tables

1)Positioning Figures and Tables: Place figures and tables at the top and bottom of columns. Avoid placing them in the middle of columns. Large figures and tables may span across both columns. Figure captions should be below the figures; table heads should appear above the tables. Insert figures and tables after they are cited in the text. Use the abbreviation ―Fig. 1‖, even at the beginning of a sentence.

TABLE I. T ABLE T YPE S TYLES

a. Sample of a Table footnote. (Table footnote)

Figure 1. Example of a ONE-COLUMN figure caption.

Please see last page of this document for AN EXAMPLE of a 2-COLUMN Figure.

Figure Labels: Use 8 point Times New Roman for Figure labels. Use words rather than symbols or abbreviations when writing Figure axis labels to avoid confusing the reader. As an example, write the quantity ―Magnetization‖, or

―Magnetization, M‖, not just ―M‖. If including units in the label, present them within parentheses. Do not label axes only with units. In the example, write ―Magnetization (A/m)‖ or ―Magnetization {A[m(1)]}‖, not just ―A/m‖. Do not label axes with a ratio of quantities and units. For example, write ―Temperature (K)‖, not ―Temperature/K‖. D.Footnotes

Use footnotes sparingly (or not at all) and place them at the bottom of the column on the page on which they are referenced. Use Times 8-point type, single-spaced. To help your readers, avoid using footnotes altogether and include necessary peripheral observations in the text (within parentheses, if you prefer, as in this sentence).

VI.C OPYRIGHT F ORMS AND R EPRINT O RDERS You must submit the IEEE Electronic Copyright Form (ECF) per Step 7 of the CPS author kit’s web page. THIS FORM MUST BE SUBMITTED IN ORDER TO PUBLISH YOUR PAPER.

Please see Step 9 for ordering reprints of your paper. Reprints may be ordered using the form provided as or .

A CKNOWLEDGMENT

The preferred spelling of the word ―acknowledgment‖ in America is without an ―e‖ after the ―g‖. Avoid the stilted expression, ―One of us (R.B.G.) thanks . . .‖ Instead, try ―R.B.G. thanks‖. Put applicable sponsor acknowledgments here; DO NOT place them on the first page of your paper or as a footnote.

R EFERENCES

List and number all bibliographical references in 9-point Times, single-spaced, at the end of your paper. When referenced in the text, enclose the citation number in square brackets, for example [1]. Where appropriate, include the name(s) of editors of referenced books. The template will number citations consecutively within brackets [1]. The sentence punctuation follows the bracket [2]. Refer simply to the reference number, as in [3]—do not use ―Ref. [3]‖ or ―reference [3]‖ except at the beginning of a sentence: ―Reference [3] was the first. . .‖

Number footnotes separately in superscripts. Place the actual footnote at the bottom of the column in which it was cited. Do not put footnotes in the reference list. Use letters for table footnotes.

Unless there are six authors or more give all authors’names; do not use ―et al.‖. Papers that have not been published, even if they have been submitted for publication,

should be cited as ―unpublished‖ [4]. Papers that have been accepted for publication should be cited as ―in press‖ [5]. Capitalize only the first word in a paper title, except for proper nouns and element symbols.

For papers published in translation journals, please give the English citation first, followed by the original foreign-language citation [6].

[1]G. Eason, B. Noble, and I. N. Sned don, ―On certain integrals of

Lipschitz-Hankel type involving products of Bessel functions,‖ Phil.

Trans. Roy. Soc. London, vol. A247, pp. 529–551, April 1955.

(references)

[2]J. Clerk Maxwell, A Treatise on Electricity and Magnetism, 3rd ed.,

vol. 2. Oxford: Clarendon, 1892, pp.68–73.

[3]I. S. Jacobs and C. P. Bean, ―Fine particles, thin films and exchange

anisotropy,‖ in Magnetism, vol. III, G. T. Rado and H. Suhl, Eds.

New York: Academic, 1963, pp. 271–350.

[4]K. Elissa, ―Title of paper if known,‖ unpublished.[5]R. Nicole, ―Title of paper with only first word capitalized,‖ J. Name

Stand. Abbrev., in press.

[6]Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, ―Electron

spectroscopy studies on magneto-optical media and plastic substrate interface,‖ IEEE Transl. J. Magn. Japan, vol. 2, pp. 740–741, August 1987 [Digests 9th Annual Conf. Magnetics Japan, p. 301, 1982]. [7]M. Young, The Technical Writer’s Handbook. Mill Valley, CA:

University Science, 1989.

[8]Electronic Publication: Digital Object Identifiers (DOIs):

Article in a journal:

[9] D. Kornack and P. Rakic, ―Cell Proliferation without Neurogenesis in

Adult Primate Neocortex,‖ Science, vol. 294, Dec. 2001, pp. 2127-2130, doi:10.1126/science.1065467.

Article in a conference proceedings:

[10]H. Goto, Y. Hasegawa, and M. Tanaka, ―Efficien t Scheduling

Focusing on the Duality of MPL Representatives,‖ Proc. IEEE Symp.

Computational Intelligence in Scheduling (SCIS 07), IEEE Press, Dec.

2007, pp. 57-64, doi:10.1109/SCIS.2007.357670.

Figure 2. Example of a TWO-COLUMN figure caption: (a) this is the format for referencing parts of a figure.

国际会议论文摘要post样版

on Agriculture and Environment 2012 1 Yuji KAMIYA RIKEN Plant Science Center Abstract:The phytohormone auxin plays critical roles in the regulation of plant growth and development. Indole-3-acetic acid (IAA) has been recognized as the major auxin for more than 70 years. Although several pathways have been proposed, how auxin is synthesized in plants is still unclear. Previous genetic and enzymatic studies demonstrated that both TRYPTOPHAN AMINOTRANSFERASE OF ARABIDOPSIS (TAA) and YUCCA (YUC) flavin monooxygenase-like proteins are required for biosynthesis of IAA during plant de- velopment, but these enzymes were placed in two independent pathways. Recently, we demonstrate that the TAA family produces indole-3-pyruvic acid (IPA) and the YUC family functions in the conversion of IPA to IAA in Arabidopsis (Arabidopsis thaliana) by a quantification method of IPA using liquid chromatography–electrospray ionization–tandem MS. We further show that YUC protein expressed in Escherichia coli shows faint yellow color suggesting the presence of FMD and directly converts IPA to IAA. Indole-3-acetaldehyde is probably not a precursor of IAA in the IPA pathway. Our results indicate that YUC proteins catalyze a rate-limiting step of the IPA pathway, which is the main IAA biosynthesis pathway in Arabidopsis. Although 2,4-D and other synthetic auxins were used in agriculture to increase crop production, specific inhibitors and promoters of IAA biosynthesis were not well studied. Our identification of the two specific enzymes for IAA biosynthesis may give us new approach to increase crop production by regulating auxin biosynthesis. Yuji Kamiya is a Group Director of the RIKEN Plant Science Center. He received Degree in agricultural chemistry from the University of Tokyo in 1975. He joined the Pesticide Synthesis Laboratory at RIKEN in 1975. From 1980 to 1982 he studied on gibberellins biosynthesis at the Institute of Plant Physiology, University of G?ttingen, as an Alexander von Humboldt Fellow. Since that time on he has continued to study gibberellins biosynthesis and its regulation. He was appointed as the Head of the Laboratory for Plant Hormone Function of the RIKEN Frontier Research Program from 1991 to 1998. In 2000, he joined the Plant Science Center as the Head of the Laboratory of Cellular Growth Development and in October 2000 he was promoted to the position of Group Director. Main Activities: Research on regulation of plant hormone biosynthesis Cloning and characterization of enzymes involved in hormone biosynthesis Screening of chemical proves to increase plant biomass production.

国际会议(澳门)的论文格式要求

第十四届国际汉语教学学术研讨会论文体例 一、文档：请提供使用Word 编辑的电子文件。 二、篇幅：论文无论使用中文或英文篇幅不设限制。页面周边空白处均为一英寸（即2.54厘米），内容提要中文150个汉字以内，英文提要80个单词以内，作者简介50个汉字以内。三、各项内容顺序：论文标题、（国家或地区）作者姓名、单位、内容提要、关键词、英文标题、英文姓名及单位、英文内容提要、英文关键词、正文、注释、参考文献、作者简介。(注：英文论文则英文标题等在前，中文标题等在后。) 四、字体和字号：论文题目用小二号(18 pts)宋体,英文用Times New Roman 18；作者、单位、内容提要及关键词用五号(10.5 pts)仿宋字体，“内容提要”和“关键词”几个字加粗,英文用Times New Roman； 中文正文用五号(10.5 pts)宋体，英文正文用Times New Roman 10.5 pts; 一级标题用小四号(12 pts)仿宋体，英文用Times New Roman 12 pts; 二级标题用五号(10.5 pts)黑体,英文用Arial 10.5 pts; 三级标题用五号(10.5 pts)楷体,英文用Calibri 10.5 pts; 注释和参考文献用小五号(9 pts)宋体; 英文用Times New Roman 9 pts; 作者简介用小五号(9 pts)仿宋体, 英文用New Courier 9 pts。 五、标题编号：正文中所有的标题均需独占一行，任何级次的标题均需列出具体的标题题目。序号使用格式为： 一级标题用汉字“一、二、……”，居中排列，上下各空一行； 二级标题用“（一）（二）（三）……”，前空两汉字格； 三级标题用“1、2、3、……”，前空两汉字格。 六、例句和图表：独立列出的例句用五号楷体，编号采用（1）（2）（3）的形式，全文所有例句连续编号。 文中如有图表，请给图和表分别编号，即：图1、图2、……；表1、表2……。编号及图表名称置于图表上方。全文图表连续编号。图表内的汉字用小五号宋体，图表名用小五号仿宋体。复杂的图表请用绘图仪器绘制清晰或用高精度打印机打印，以便直接扫描制版。 七、国际音标：写在直方括号内，声调一律用数码标在右上角，如：[tan51]。 八、注释：一律采用页内脚注的形式，脚注的序号使用①②③……的格式，每页重新编号。 九、参考文献 行文中文献引用采用下列格式：张冰（1987）。括注采用下列格式：（张冰，1987）。多个文献之间用顿号隔开，如：（Smith，1983、1991）。多个作者之间用分号隔开，如（张冰，1987；刘凯文，2001）。引自专著的观点应注明页码，如：刘凯文（1982：95-97）。 正文所引文献必须在文末全部列出，文末所列参考文献均须在正文中明确提及。中文参考文献在前，外文参考文献在后。中文参考文献按作者姓氏汉语拼音字母顺序排列，外文参考文献按作者姓氏字母顺序排列。每条文献必须顶格写，换行时空两格。 外文论文用正体且首单词的首字母大写，外文书名和期刊名用斜体且每个单词的首字母均大写。年分请引首次发表时间，转载请注明。各类文献请依照下列格式： 中文著作：胡文仲。《跨文化交际学选读》。长沙：湖南教育出版社，1990。 中文期刊论文：赵金铭。汉语作为外语教学能力校准试说。《语言教学与研究》，2007(2)。 中文论文集：朱永生、姚道中。《第五届国际汉语教学学术研讨会论文集》。北京：世界图书出版公司北京分公司，1996。

论文格式要求及模板

论文格式要求 1.论文开本及版芯 论文开本大小：A4纸； 正文页面设置：左边距：30mm，右边距：25mm；上边距：30mm，下边距：25mm。 2.层次和标题 一级标题：宋体、三号、加粗，段前段后间距为一行、左对齐、单列一行； 如：1 课程论文； 二级标题：宋体、四号、加粗，段前段后间距为一行、左对齐、单列一行； 如：1.1课程论文； 三级标题：宋体、小四号、加粗，段前段后间距为一行、左对齐、单列一行； 如：1.1.1课程论文； 3.摘要 摘要标题：宋体、三号，加粗，段前段后间距为一行、居中、单列一行宋体、小四号； 4.关键词 3～5个，宋体、小四号、各关键词间距3个空格； 5.目录 目录标题格式要求同摘要标题，目录内容中一级标题、后记、参考文献和附录为宋体、四号，二级标题为宋体、小四。 6．正文 必须从正面开始，并设置为第1页。 （1）正文字体：正文采用小四号宋体，行间距为20磅。 （2）图、表、公式：图形要精选，要具有自明性，切忌与表及文字表述重复。图形坐标比例不宜过大，同一图形中不同曲线的图标应采用不同的形状和不同颜色的连线。图中术语、符号、单位等应与正文中表述一致。图序、标题、图例说明居中置于图的下方。 表中参数应标明量和单位。表序、标题居中置于表的上方。表注置于表的下方。 图、表应与说明文字相配合，图形不能跨页显示，表格一般放在同一页内显示。 公式居中对齐，公式编号用小括号括起，右对齐，其间不加线条。 文中的图、表、公式、附注等一律用阿拉伯数字按章节（或连续）编号，例：如图1-1，表2-2，公式（3-10）等。 文中表格均采用标准表格形式（如三线表，可参照正式出版物中的表格形式），图表单位要统一为国际单位制（SI）。 图、表标题采用小五号加粗；表格中文字、图例说明采用小五号宋体；表注采用六号宋体 (3)量和单位：应严格执行GB3100~3102：93有关量和单位的规定（参阅《常用量和单位》.计量出版社，1996）。单位名称的书写，可采用国际通用符号，也可用中文名称，但全文应统一，不要两种混用。 7.参考文献

ei论文格式要求

ei论文格式要求 ----WORD文档，下载后可编辑修改---- 下面是小编收集整理的范本，欢迎您借鉴参考阅读和下载，侵删。您的努力学习是为了更美好的未来！ ei论文格式要求1、题目：应简洁、明确、有概括性，字数不宜超过20个字。 2、摘要：要有高度的概括力，语言精练、明确，中文摘要约100--200字; 3、关键词：从论文标题或正文中挑选3～5个最能表达主要内容的词作为关键词。 4、目录：写出目录，标明页码。 5、正文： 论文正文字数一般应在3000字以上。 论文正文：包括前言、本论、结论三个部分。 前言(引言)是论文的开头部分，主要说明论文写作的目的、现实意义、对所研究问题的认识，并提出论文的中心论点等。前言要写得简明扼要，篇幅不要太长。 本论是论文的主体，包括研究内容与方法、实验材料、实验结果与分析(讨论)等。在本部分要运用各方面的研究方法和实验结果，分析问题，论证观点，尽量反映出自己的科研能力和学术水平。 结论是论文的收尾部分，是围绕本论所作的结束语。其基本的要点就是总结全文，加深题意。 6、谢辞：简述自己通过做论文的体会，并应对指导教师和协助完成论文的有关人员表示谢意。 7、参考文献：在论文末尾要列出在论文中参考过的专著、论文及其他资料，所列参考文献应按文中参考或引证的先后顺序排列。 8、注释：在论文写作过程中，有些问题需要在正文之外加以阐述和说明。 9、附录：对于一些不宜放在正文中，但有参考价值的内容，可编入附录中。 关于学习的论文范文从比较中进入日语学习之门 摘要：日语的学习一向有着“笑着进去，哭着出来”之称。所谓“笑着进

去”，大概是说为入门容易。中日一衣带水，从古至今就有着千丝万缕的联系，现代日语汉字主要由汉字、假名、罗马字组成;日语的语音仿效了我国的汉音、唐音和吴音;日语的平假名、片假名借助了我国汉字或汉字的一部分，平假名形似中国书法艺术中的草书，片假名形似汉字中的偏旁，如同平假名中的あ(读a)，便是从汉字草书中的“安”演化而来;日语的词汇大约一半是汉语词汇。因此，许多中国人看到日语时稍加推敲就能够了解许多日语词汇或者是短句的意思。但必须注意的是，中国的汉字及文化传到日本之后，经历了演变、发展，自成体系。无论是在意义还是读音方面，都与现代汉语有很大差别，并且因为日本本土没有经历过外族入侵及大规模的战乱，所以自身语言、文化得以系统地保留和传承。从日语的词汇中我们可以发现，日语的词汇中有汉语，有外来语，其中外来语又包含了德语，英语，法语，葡萄牙语等多个语种的词汇。甚至，很多词汇与汉语大相径庭，日语中的“娘”是女儿的意思;“新聞”是报纸的意思，这就对那些熟悉汉语而初学日语的人造成了一定困扰。那么如何才能做到既笑着进去，又尽可能笑出来呢? 一、从与古汉语的比较中学 汉语与日语虽属两种不同的语系，但自古以来就汉语特别是古汉语有着特殊的联系，两种语系之间在语音、词汇、语法、篇章、语用有着种种渊源。 如人称代词省略是古汉语中常有的事，而且人称代词与现代汉语也有较大的不同，如单复数无不同表示法，第三人称代词具有不成熟性与指示代词关系密切，古汉语中没有表敬称的“您”，但有许多表示尊称与谦称的词语。人称省略也是日语学习中遇到的首要问题，与日本相比，现代汉语说话时“你、我、他”等人称代词必不可少。日本民族结构单一，日本人重视集团性，不强调自身的个性，并且日语有一套完整的敬语体系，说话的对象及方向性全靠谓语的不同来区分，所以初学者在使用日语表达时，首先要克服的是必须去掉“私、あなた”等人称代词。 在古汉语中，人们说话为了尊重对方，常常堆砌许多敬词和谦词，不仅对人的称呼有一定的规矩，就连动作行为、器具物品都要用上一些敬谦词来修饰。譬如称人，为了尊重对方，常用对方的身分(如君、大夫、卿等)或美德(如夫子、子、先生、叟等)来称呼。同时，也用压低身分(如仆、常隶、下走、小人等)或

论文格式模板

标题（居中，小二号黑体）1 作者姓名1，作者姓名2，作者姓名3（小四号宋） 1学校系名，城市(邮编)（五号仿宋） 2学校系名，城市(邮编)（五号仿宋） 3学校系名，城市(邮编)（五号仿宋） E-mail（小五，Times New Roman） [示例]： 王忱1，张凌峰2 1 华中科技大学船海学院，湖北武汉 (430074) 2 华中科技大学船海学院，湖北武汉 (430074) E-mail：zhouhust@https://www.sodocs.net/doc/106604637.html, 摘要：本文给出了一种……（五号，楷体）页边距: 左右各:3.17cm, 上下各:2.5cm；页眉：1.7cm, 页脚：1.75cm。 关键词：（3－5个） 1.引言（小三号，宋体，加粗） [示例]： 近年来。。。（正文小四号宋体，段首空两汉字字符，1.25倍行距）页边距: 左右各:3.17cm,上下各:2.5cm；页眉：1.7cm, 页脚：1.75cm。 2.系统介绍（同上） 2.1 一级子标题（四号，宋体，加粗） 2.1.1 二级子标题（小四号，宋体，加粗） 图表的标注：图片标注在下方，表格标注在表格上方，居中，汉字用宋体，数字英文用Time New Roman , 罗马字用Symbol。字号：小五。 文献出处标注：以参考文献的序号在正文中以[1]标注出，字体：Times New Roman，字号：五号，上标，颜色：蓝色。例：。。。年产量居全国之首[1]。。。。

3.。。。。。。 4.。。。。。。 5.结论（同上） 本文给出了。。。 6.致谢（可选） 应向对论文有帮助的有关人士或单位表示谢意。 参考文献（五号，黑体） [1]H.E.S.Said, T.Tan and K.Baker．Personal identification based on handwriting [J]．Pattern Recognition, 33:149-160, Jan. 2000 [2]吴佑寿，丁晓青．《汉字识别原理与应用》[M]，北京：高等教育出版社，1992.8。 （小五号宋体） 注：文中所引的参考文献, 作者均应认真阅读过, 对文献的作者、题目、发表的刊物、年份、卷期号和起止页码等均应核实无误,并按在正文出现的先后顺序编号。标引的序号两边加“[]”，作者不超过3人的姓名都写，超过3人的第三人后面加“，等（et al）” 。无论中外署名，一律姓（大写）先名后，作者姓名之间以逗号分隔。参考文献一律置于文末。具体格式如下： 期刊：作者．论文题目［J］．刊名，出版年，卷号（期号）：起始页码-终止页码． 专著：作者．书名［M］.出版地：出版社，出版年． 译著：作者．书名［M］.译者．出版地：出版者，出版年． 论文集：作者．论文题目［A］．编者. 文集［C］．出版地：出版者，出版年.起始页码-终止页码． 学位论文：作者．论文题目［D］．所在城市：保存单位，年份． 专利：申请者．专利名［P］．国名及专利号，发布日期． 技术标准: 技术标准代号．技术标准名称［S］．地名：责任单位，发布年份 技术报告：作者．文题［R］．报告代码及编号,地名：责任单位，年份． 报纸文章：作者．文题［N］．报纸名，出版日期(版次)． 电子公告／在线文献：作者．文题［EB/OL］．http://…，日期． 数据库／光盘文献：作者．文题［DB/CD］．出版地:出版者，出版日期． 其他文献：作者．文题［Z］．出版地：出版者，出版日期．

EI论文要求事例

(作者按此范例中的格式要求排版) 中文文题(不超过20字)* 作者11，作者22，作者31 (1. 学校系名，城市邮编；2. 单位名称2，城市邮编) 摘要：包括研究目的、方法、结果、结论4部分，150～300字。摘要不分段，独立成 篇，意义完整；信息具体，使用科学性文字和具体数据，不使用文学性修饰词；不使用 图、表、参考文献、复杂的公式和复杂的化学式。不用第一人称作主语。 关键词：关键词1(与分类号对应)，关键词2，关键词3，…(3～8个) 中图分类号：分类号1；分类号2(查《中国图书馆分类法》) 英文文题 (与中文标题相应，除第一字母及专有名词应大写以外，一律小写第一个词不用冠词) Author1，Author 2，Author 1… (1. Department, School, City Postal code，China；2. Company, City Postal code，China) Abstract:要求与中文意思对应，语言流利,信息具体。第一句话不应与文题重复，尽量使用简单句，尽量使动词靠近主语，不用第一人称作主语。 Key words: key word 1，key word 2，key word 3(关键词的内容、数量和顺序，均与中文关键词相应；除专有名词应大写以外，一律小写) 引言，不计入章节编号。 1几点要求 1.1篇幅、正斜体、黑体 篇幅：一般不超过6000汉字(计空格、图表占位)。 正斜体：变量名称用斜体单字母表示，需要区分时加下标；下标中由文字转化来的说明性字符用正体，由变量转化来的用斜体。单位、词头用正体。如nm, pF等。 运算符用正体，如d, exp, lg, max, min 等；几个特殊常数用正体，如e, π，i. 黑体：矩阵、矢量名称用黑斜体表示。 论文及附图、附表中的计量单位应一致，一律采用法定计量单位制，表达量值时，一律使用单位的国际符号。 标点符号正确，格式规范。 1.2图形要求 线条粗细：轮廓线、曲线等图中的主要部分用0.75磅，尺寸线、指引线等辅助部分用0.5磅。 *收稿日期：xxxx－xx－xx 基金项目类别(项目编号) 作者简介：第一作者的姓名(出生年－)，性别，民族，籍贯。职称，研究方向。E-mai： 通讯作者的姓名，E-mail: (可选)

会议论文模板

附件1 会议论文模板 会议论文 1、论文征稿范围 （1）肉品科学基础；（2）肉品药物残留分析技术；（3）肉类生产可追溯体系及保障技术；（4）肉品清洁生产、保鲜及贮运技术；（5）肉品安全法律、法规、标准；（6）传统肉制品加工、现代化装备与质量控制技术；（7）肉品加工副产物综合利用；（8）肉品加工机械、包装新技术；（9）肉品分级、品质检验、风味分析；（10）肉品添加剂开发与应用；（11）肉品营养与人类健康；（12）肉品工业发展政策与新举措；（13）基因与肉类品质；（14）饲养与肉类品质。 2、论文格式与要求 （1）论文内容未公开发表或未投稿，一般不接受综述文章； （2）具体撰写格式请参照以下“投稿论文模板”； （3）论文一般不超过6页； （4）9月15日前发送至会务组邮箱（meatacsy@https://www.sodocs.net/doc/106604637.html,）。

投稿论文模板 模板使用方法： 1.在Windows操作系统中，直接双击本模板文件，作者可以输入稿件。如果作者想将稿件 直接输入模板中，请选中你想代替的文字，然后开始输入稿件内容(例如，选中“标题” 部分输入你自己的标题)。 2.投稿时请使用通栏，不必分两栏，分栏工作由排版人员完成。 3. 如果已有稿件Word文档，则可以拷贝、粘贴稿件内容到本模板。 4. 请确认稿件内容格式无误后，删除所有不需要的部分，包括说明部分（红色字体部分）和修改痕迹。 5. 保存文件：选择“文件→另存为”为Word文档文件(.doc)。 总则： 1. 文中所有的中文都使用“宋体”字体；所有的英文和数字都使用“Times New Roman”字体，包括标题、图、表、参考文献等。 2. 中英文表述中，数值和单位之间间隔1/4中文字宽度的空格。 题目宋体小一、居中、加粗、无缩略语 第一作者姓名1，作者二姓名2，通信作者姓名1,* (宋，10.5号，如果第一作者不是联系人，请在通信联系人右上角标注*；两个字的作者名字间空一格；外籍作者用英文全名，不能缩写，并尊重该国姓名表达习惯，少数民族作者姓名按其民族习惯著录姓名。不同工作单位的作者姓名右上角加注数字序号。如果所有的作者都 在同一个单位，则不需对作者编号。） (1.作者单位正式对外名称，省份城市邮编；2.作者单位正式对外名称，省份城市邮编)宋体9号（作者的工作单位，均应包括单位全称(大学原则上标注到具体的学院)、所在省市名及邮政编码，单位名称与省市之间应以逗号“，”分隔，整个单位信息项用圆括号“( )”括起。多作者的工作单位名称之前加与作者姓名序号相同的数字序号，单位编号应按在文中的出现顺序依次排号，各工作单位之间连排时以分号“；”分隔。） 摘要：宋体9号，摘要中首次出现的英文缩写名，不能直接用英文缩写形式，需用“中文名(英文全名， 点击03版WORD的“插入”或07版WORD的“引用”工具，用其中的“插入脚注”按钮插入短横线。 以下字体为9号、中文宋体，英文、数字用“Times New Roman”字体。 基金项目指文章产出的资助背景，项目名称应按国家有关部门规定的正式名称填写；多项基金项目应依次列出，其间分号“；”分隔。项目后给出编号，编号用()括起。例： 基金项目：国家自然科学基金青年科学基金项目(30471225)；“十二五”国家科技支撑计划项目(项目编号)；国家高技术研究发展计划（863计划）项目(项目编号) 作者简介：姓名(出生年—)，性别，职称(如果有)，学位或学历(尽量写学位)，研究方向为×××。E-mail：×××(只标注一个常用的电子邮箱) *通信作者：姓名(出生年—)，性别，职称(如果有)，学位或学历(尽量写学位)，研究方向为×××。E-mail：×××(只标注一个常用的电子邮箱) 只刊登一位第一作者、通信作者(如果有通信作者)简介。

EI会议论文格式模版

Paper Title Subtitle as needed Authors Name/s per 1st Affiliation (Author) line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptable line 3: City, Country line 4: e-mail: name@https://www.sodocs.net/doc/106604637.html, Authors Name/s per 2nd Affiliation (Author) line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptable line 3: City, Country line 4: e-mail: name@https://www.sodocs.net/doc/106604637.html, Abstract—This electronic document is a “live” template. The various components of your paper [title, text, heads, etc.] are already defined on the style sheet, as illustrated by the portions given in this document. DO NOT USE SPECIAL CHARACTERS, SYMBOLS, OR MATH IN YOUR TITLE OR ABSTRACT. (Abstract) Keywords-component; formatting; style; styling; insert (key words) I.I NTRODUCTION (H EADING 1) All manuscripts must be in English. These guidelines include complete descriptions of the fonts, spacing, and related information for producing your proceedings manuscripts. Please follow them and if you have any questions, direct them to the production editor in charge of your proceedings at Conference Publishing Services (CPS): Phone +1 (714) 821-8380 or Fax +1 (714) 761-1784. This template provides authors with most of the formatting specifications needed for preparing electronic versions of their papers. All standard paper components have been specified for three reasons: (1) ease of use when formatting individual papers, (2) automatic compliance to electronic requirements that facilitate the concurrent or later production of electronic products, and (3) conformity of style throughout a conference proceedings. Margins, column widths, line spacing, and type styles are built-in; examples of the type styles are provided throughout this document and are identified in italic type, within parentheses, following the example. PLEASE DO NOT RE-ADJUST THESE MARGINS. Some components, such as multi-leveled equations, graphics, and tables are not prescribed, although the various table text styles are provided. The formatter will need to create these components, incorporating the applicable criteria that follow. II.T YPE S TYLE AND F ONTS Wherever Times is specified, Times Roman or Times New Roman may be used. If neither is available on your word processor, please use the font closest in appearance to Times. Avoid using bit-mapped fonts if possible. True-Type 1 or Open Type fonts are preferred. Please embed symbol fonts, as well, for math, etc. III.E ASE OF U SE A.Selecting a Template (Heading 2) First, confirm that you have the correct template for your paper size. This template has been tailored for output on the US-letter paper size. If you are using A4-sized paper, please close this template and download the file for A4 paper format called ―CPS_A4_format‖. B.Maintaining the Integrity of the Specifications The template is used to format your paper and style the text. All margins, column widths, line spaces, and text fonts are prescribed; please do not alter them. You may note peculiarities. For example, the head margin in this template measures proportionately more than is customary. This measurement and others are deliberate, using specifications that anticipate your paper as one part of the entire proceedings, and not as an independent document. Please do not revise any of the current designations. IV.P REPARE Y OUR P APER B EFORE S TYLING Before you begin to format your paper, first write and save the content as a separate text file. Keep your text and graphic files separate until after the text has been formatted and styled. Do not use hard tabs, and limit use of hard returns to only one return at the end of a paragraph. Do not add any kind of pagination anywhere in the paper. Do not number text heads-the template will do that for you. Finally, complete content and organizational editing before formatting. Please take note of the following items when proofreading spelling and grammar: A.Abbreviations and Acronyms Define abbreviations and acronyms the first time they are used in the text, even after they have been defined in the abstract. Abbreviations such as IEEE, SI, MKS, CGS, sc, dc, and rms do not have to be defined. Do not use abbreviations in the title or heads unless they are unavoidable. Identify applicable sponsor/s here. (sponsors)

论文格式模板

论文题目（三号、黑体、加粗、居中） 作者张某某 班级 学号 摘要：扼要介绍本论文的内容、采用的方法和得到的主要结果。（五号、宋体） 关键词：依次列出3-5个与本论文内容关系最紧密的关键词。（五号、宋体） 论文正文文字内容一律采用小四号宋体和Times New Roman，标题加粗。正文选择格式段落为1.5倍行距。页面设置为：上2cm，下2cm，左2.5cm，右1.5cm，装订线0cm，选择“不对称页边距”，页眉1.2cm，页脚1.2cm。 页眉设置为：居中，以小5号楷体字键入“管理学课程论文”。 页脚设置为：插入页码，居中，小5号字楷体字，格式为“第 1 页”。 文科论文章节序号采用五级编号顺序。（如：一、（一） 1. （1）①）。如： 一、第一部分标题 （一）第一部分第一小节标题 第一部分第一小节内容。 …… 论文写作要求符合一般学术论文的写作规范，内容要理论联系实际，涉及到他人的观点、统计数据或计算公式的要有出处（如“…效率可提高25％[14]。”表示此结果援引自文献14），涉及的计算内容的数据要求准确。 公式应采用公式编辑应用程序输入，公式顺序编号，如 20 ++=(1) Ax Bx C 图与表应有相应的名称，如“图1 实验系统流程示意图”等。 论文主体包括引言或绪言、正文、结论、附录、致谢和参考文献等。 引言一般包括本课题的提出、前人在该问题有关领域已经做过的工作和成果的概述、本

课题的内容和采用的方法、本论文的结果说明等。 论文应文字流畅，语言准确，层次清晰，论点清楚，论据准确，论证完整、严密，有独立的观点和见解，应具备学术性、科学性和一定的创造性。 如有必要可增加附录部分，包括设计图纸、实验所用仪器、设备性能简介、照片和翻译论文、资料的原文、计算机程序等。[1]P1-5 参考文献：（五号，宋体、Times New Roman） [1]作者．文章题目名．期刊名，年份，卷号，期数，页码．（期刊文献的格式） [2]作者．书名．出版单位，年份，版次，页码．（图书文献的格式） [3]作者．文章题目名．会议名（论文集），年份，会议地点．（会议文献的格式） （注：范文素材和资料部分来自网络，供参考。只是收取少量整理收集费用，请预览后才下载，期待你的好评与关注）

EI 会议论文格式模版(中文)

说明：因为很多会议论文的模版都是英文的，我们是中国人，虽然写论文要用English，但是我们可以有中文版的模版说明！本人上传这个文档是为大家写会议论文学习交流使用！翻译只是个人兴趣爱好，但是由于个人经验不是太丰富，有些专有名词翻译可能会有些出入，如有翻译不妥的地方请多包含！如果网友有翻译的更好的可以上传，让我们学习交流！ 这只是论文模版说明，并没有按其所说的规定进行格式编排，要看原文请参看： MSW_A4_format 好了废话不多说了,开始你的论文之旅吧！ 恋上咖啡的鱼 2012年6月10日

论文题目（使用样式：论文题目） 副标题根据需要(论文副标题) 第一从属作者姓名第二从属作者姓名 第一行（从属关系）：部门.组织机构名称第一行（从属关系）：部门.组织机构名称 第二行：组织机构名称，可以接受首字母缩写第二行：组织机构名称，可以接受首字母缩写第三行：城市，国家第三行：城市，国家 第四行：电子邮箱如需要的话第四行：电子邮箱如需要的话 摘要—这个电子文件是“排好版的”模版。你论文的各种不同的组成部分[论文标题，正文，段落标题等]已经在这样式表中定义了，如文件中部分给出的举例说明。（摘要） 关键词-组件；格式化；类型；式样；插入（关键词） 1.介绍（标题1） 这个模版，对于个人电脑在MS Word 2003中修改以及保存为“Word 97-2003&6.0/95-RTF”， 为作者提供了大部分他们论文需要准备的电子版本的格式规范。所有标准论文组件被指定因为三个原因：（1）当格式化个人的论文时操作简单，（2）自动符合电子需求,以促进并发或后续生 产的电子产品，（3）会议论文集从头到尾风格一致。页边距，列宽度，行间距和字样是内置的；在文件中提供了字样的示例以及用斜体字类型辨识出，在圆括号中，在示例的后面。一些组件，例如多层次公式，图形和表格没有指定，尽管提供了各种表文本样式。格式化程序将需要创建这 些组件,包含了适用的后续标准。 2.简单操作 A. 选择一个模版(标题2) 首先，对于你的纸张大小规格确保你有正确的模板。这个模板已被定制的输出在A4大小的纸上。如果你使用的是US letter-sized纸张，请关闭这个文件，下载“MSW_USltr_format”文件。 B. 整体性的维护规范 该模板用于格式化你的论文和样式化文本。指定了所有的页边距，列宽，行间距和文本字体。请不要更改他们。你可能会注意到特性。例如，在这个模板的头部页边距测量起来是成比例的不只是习惯性的。这个尺寸和其他的东西是故意的，使用规范,期望你的论文成为整个会议论文集的一部分，而不是一个独立的文档。请不要修改任何现有的名称。 3.格式化之前准备好你的论文 在开始格式化你的论文之前，首先编写并保存内容作为一个单独的文本文件。保持你的文本和图形文件是分开地,直到把文本格式化和样式化之后。不要使用硬标签，限制使用硬回车只有在一个段落的结尾可以有一个硬回车。不要添加任何类型的分页在论文的任何地方。不要为你的文本标题编号-该模板将为你做这些事情。 最后，在格式化之前，完整的内容以及编辑组织。校对拼写和语法时请注意以下项目:

EI国际会议模板(TTP)

Your Paper's Title Starts Here: Please Center Sanfeng Zhang1, a, Hulan Liu2, b and Dada Xi2, c 1School of xxx, xxx University, Guangzhou 510000, China; 2School of yyy, zzz University, Guangzhou 510000, China. a zzz@https://www.sodocs.net/doc/106604637.html,, b xxx@https://www.sodocs.net/doc/106604637.html,, c yyyy@https://www.sodocs.net/doc/106604637.html, Keywords: List the, keywords covered, in your paper. Abstract. This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in). This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in). Introduction All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper. Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. Should authors use tables or figures from other Publications, they must ask the corresponding publishers to grant them the right to publish this material in their paper. Use italic for emphasizing a word or phrase. Do not uses boldface typing or capital letters except for section headings (cf. remarks on section headings, below). Do not number your paper: All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper. Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. Organization of the Text Section Headings. The section headings are in boldface capital and lowercase letters. Second level headings are typed as part of the succeeding paragraph (like the subsection heading of this paragraph). All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper. Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. When receiving the paper, we assume that the corresponding authors grant us the copyright to use. Page Numbers. Do not number your paper: All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper. Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. Should authors use tables or figures from other Publications, they must ask the corresponding publishers to grant them the right to publish this material in their paper. Use italic for emphasizing a word or phrase. Do not use boldface typing or capital letters except for section headings (cf. remarks on section headings, below). c2 = a2 + b2. (1)