Inductance2DCR typ3DCR max3SRF typ
Part number1±10% (μH)(mOhm)(mOhm)(MHz)10% drop20% drop30% drop20°C rise40°C rise SER1360-331KL_0.330.770.8520036414313.016.9 SER1360-651KL_0.650.770.8516023272813.016.9 SER1360-102KL_ 1.0 2.36 2.6075323333.59.513.0 SER1360-182KL_ 1.8 2.36 2.60501719209.513.0 SER1360-272KL_ 2.7 2.36 2.60421213149.513.0 SER1360-402KL_ 4.0 5.50 6.0534*******.19.4 SER1360-472KL_ 4.7 5.50 6.05329.511127.19.4 SER1360-602KL_ 6.0 5.50 6.05288.09.09.57.19.4 SER1360-802KL_8.09.8310.81267.58.59.0 5.57.6 SER1360-103KL_109.8310.8124 6.27.07.5 4.47.2
1.When ordering, please specify termination and packaging codes:
SER1360-103K LD
Termination:L=RoHS compliant matte-tin over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging:D=13″machine-ready reel.EIA-481 embossed plastic
tape (500 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2.Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/
HP 4284A or equivalent.
3.DCR measured on a micro-ohmmeter.
4.SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
5.DC current at which the inductance drops 10% (typ) from its value
without current.
6.Current that causes a 40°C temperature rise from 25°C ambient.
7.Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.Designer’s Kit C365 contains 3 each of all values
Core material Ferrite
Core and winding loss See https://www.sodocs.net/doc/1818870818.html,/coreloss Terminations RoHS matte tin over nickel over phos bronze. Other terminations available at additional cost.
Weight2.6 – 2.8 g
Ambient temperature–40°C to +85°C with I rms current, +85°C to +125°C with derated current
Storage temperature Component: –40°C to +125°C. Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL)1 (unlimited floor life at <30°C / 85% relative humidity)
Mean Time Between Failures (MTBF)26,315,789 hours Packaging500 per 13″ reel;Plastic tape:24 mm wide,
0.4 mm thick, 16 mm pocket spacing, 6.6 mm pocket depth
PCB washing Only pure water or alcohol recommended
3
Terminal 3 is for
mounting stability only.
Dimensions are in inches
mm
80
706050403020010T e m p e r a t u r e r i s e (f r o m 25°C )
Current (Arms)
Temperature Rise vs Current
Ambient temperature (°C)
P e r c e n t o f r a t e d c u r r e n t
Current Derating
Typical L vs Current
Current (A)
I n d u c t a n c e (μH )
123456789
101112
I n d u c t a n c e (μH )
Frequency (MHz)