广东省自动化研究所简介(权威英文翻译版本)

Brief Introduction of GUANGDONG INSTITUTE OF AUTOMATION

History

Originally established in January 1969, GUANGDONG INSTITUTE OF AUTOMATION comes from Automation Engineering Research& Manufacturing Center before 2012 and it officially renamed in 2012 with current name. Guangdong Institute of Automation belongs to Guangdong Academy of Science and is the only provincial level R&D institute of automation & IT field in Guangdong province.

Major R&D Directions

In line with the needs of China and Guangdong province economic and social development, closely following the development of modern control technology nationwide, GUANGDONG INSTITUTE OF AUTOMATION focuses on the areas like public security, energy saving & emission reduction, industrial generic technology etc and develops the related automation/ Optimization/monitoring technology for abovementioned fields. GUANGDONG INSTITUTE OF AUTOMATION has joined together other R&D units to help Guangdong province to develop advanced technologies for the development of emerging strategic industries in Guangdong province. The Institute current major R&D directions are that: Complicated industry-level process control technology

Comprehensive monitoring and control technology

Industry-level virtual simulation testing technology

Power and electronic technology

Laboratories and other supporting R&D platforms

So far, GUANGDONG INSTITUTE OF AUTOMATION has two competitive laboratories: Guangdong province Key Laboratory of Modern Control Technology, Guangdong province Public Laboratory of Modern Control & Optical, Mechanical and Electronic Technology. The institute has Guangdong province automation control R&D center and Guangzhou automation industry engineering center. In 2010,

GUANGDONG INSTITUTE OF AUTOMATION is approved to establish a post-doctoral research center. GUANGDONG INSTITUTE OF AUTOMATION is the standing governing-unit of sophisticated machine branch of China Instruments and Meters Association; the standing governing-unit of Guangdong Automation Association; deputy governing-unit of manufacturing and information technology branch of Guangdong Mechanical and Engineering Association; governing-unit of Guangdong Internet of Things Association; an executive agent of Guangzhou Automation Association and Guangzhou Instruments and Meters Association; sponsor unit of Guangdong LED Lighting Standard Technology Ally; governing-unit of Guangdong Promotion Association for Building Scientific and Technological Infrastructure Condition Platform; member unit of Guangdong Internet of Things IT Association and Creative Ally for Research Cooperation of Guangdong, National departments and Chinese Academy of Science. Currently GUANGDONG INSTITUTE OF AUTOMATION exclusively sponsors an academic journal AUTOMATION AND INFORMATION ENGINEERING.

Social Achievements

Called upon by the needs of Guangdong province economic and social development, in recent years, with the exclusively competitive statue in technical R&D, quality control and social credit deserved, GUANGDONG INSTITUTE OF AUTOMATION has made some breakthroughs in the fields of integration innovative technology, positively develops basic scientific R&D activities and explores several leading-edge technologies in Guangdong province. The institute, served as the technical support for Guangdong` s social and economic development, has provided generic and key technology and solved many industry-related generic, key technique issues for the applications of telecom, power supply, mining, public transportation system, water works(waste water), agriculture, public security and mega-infrastructure-construction etc with good results. Meanwhile, GUANGDONG INSTITUTE OF AUTOMATION provides the high quality public service at some related fields and has become an important base of all level industry-need innovative specialist training, academic

exchanging and technology transferring in Guangdong province..

自动化专业英文自我介绍

自动化专业英文自我介绍 General Introduction* I am a third year master major in automation at Shanghai Jiao Tong University, P. R. China. Education background In 1995, I entered the Nanjing University of Science & Technology (NUST) -- widely considered one of the China’s best engineering schools. During the following undergraduate study, my academic records kept distinguished among the whole department. I was granted First Class Prize every semester, and my overall GPA(89.5/100) ranked No.1 among 113 students. In 1999, I got the privilege to enter the graduate program waived of the admission test. I selected the Shanghai Jiao Tong University to continue my study for its best reputation on Combinatorial Optimization and Network Scheduling where my research interest lies. At the period of my graduate study, my overall GPA(3.77/4.0) ranked top 5% in the department. In the second semester, I became teacher assistant that is given to talented and matured students only. This year, I won the Acer Scholarship as the one and only candidate in my department, which is the ultimate accolade for distinguished students endowed by my university. Presently, I am preparing my graduation thesis and trying for the honor of Excellent Graduation Thesis. Research experience and academic activity

个人简历英文翻译

个人简历英文翻译 Richard Anderson 1234, West 67 Street, Carlisle, MA 01741, (123)-456 7890. Objective: To get a position as Administrative Assistant (Personnel) and to gain further experience in accounting field. Experience Summary: ?Handled various work processes with efficiency ?Introduce new work process methods to increase work productivity and received appreciation for improved results Professional Experience: Personnel Assistant, July 20XX to Present Harper Printing Services, Illinois ?Handled client printing request forms and their filing ?Managed archive storage tasks ?Managed request for staff for equipment needs ?Designed forms to expedite certain work tasks and improved work productivity Personal Assistant, July 20XX to August 20XX Jasper Fabrication Works, Illinois for important tasks ?Maintained file and carried out data entry ?Maintained various files and customer request forms Education 20XX to August 20XX Pristine College, Illinois ?Completed Secretarial Course Skills ?Fast typing

自动化专业英语考试翻译

PART 3 Computer Control Technology UNIT 1 A 计算机的结构与功能 这一节介绍计算机的内部体系结构，描述了指令如何存储和译码，并解释了指令执行周期怎样分解成不同的部分。 从最基本的水平来讲，计算机简单执行存储在存储器中的二进制编码指令。这些指令按照二进制编码数据来产生二进制编码结果。对于通用可编程计算机，四个必要部件是存储器、中央处理单元（CPU，或简称处理器），外部处理器总线，输入/输出系统，正如图 3-1A-1所示。 外部处理器总线 存储器CPU输入/输出 图 3-1A-1 计算机的基本元件 存储器储存指令和数据。 CPU读取和解释指令，读每条指令所需的数据，执行指令所需的操作，将结果存回存储器。CPU所需的操作之一是从外部设备读取或写入数据。这利用输入/输出系统来实现。 外部处理器总线是一套能在其他计算机部件之间传送数据、地址和控制信息的电导线。 存储器 计算机的存储器是由一套连续编号的单元所组成。每个存储单元是一个能存二进制信息的寄存器。单元的编号称为地址。初始地址为0。制造商定义处理器的一个字长为单元的整数长。在每个字中，各位表示数据或指令。对于英特尔8086/87和摩托罗拉MC68000微处理器来说，一个字是16位长，但每个存储单元仅为8位，因此两个8位单元来存取获得一个数据字长。

为了使用存储器中的内容，处理器必须取来右边的内容。为了完成这一次读取，处理器把所需单元的二进制编码地址放到外部处理器地址总线的地址线上，然后，存储器允许处理器读取所寻址的存储单元的内容。读取存储单元的内容的这一过程并不改变该单元的内容。 存储器中的指令存储器中的指令由CPU取来。除非发生程序转移，它们按在存储器中出现的顺序来执行。用二进制形式所写的指令叫做机器语言指令。一种得到（指令）有效形式的方法是将（这些）位分成段，如图3-1A-2所示。每一段都包含一个不同类型信息的代码。 在简单的计算机中，每条指令可分为四段，每段有四位。每条指令包括操作代码（或操作码，每条指令有唯一的操作码）、操作数地址、立即数、转换地址。 在一个实际的指令集中，有很多指令。也有大量的存储单元来存储指令和数据。为了增加存储单元的数目，如果我们使用同样的方法，地址段的指令一定长于16位。除了增加指令长度外，还有很多增加微处理器寻址范围的方法：可变指令段、多字指令、多寻址模式，可变指令长度。我们不将详细讨论它们。 存储数据数据是存储器中代表代码的信息。为了有效利用存储空间和处理时间，大多数计算机提供了不同长度和表示方法的处理数据能力。能被处理器识别的各种不同表示称作数据类型。常用的数据类型有：位、二进制码、十进制数字（4位字节，BCD）、字节（8位）、字（2个字节）、双字（4个字节）。 有一些处理器提供了可处理其他数据类型。例如单精度浮点数据类（32位）和双精度浮点数据（64位）等的指令。还有另一类的数据–––特征数据。通常也表示为8位。在标准键盘上，每个计算机终端键和键的组合（例如shift和control功能键）有定为美国信息交换标准码的7位码。 存储器类型在数字控制系统的应用中，我们也关注不同存储技术的特征。对主存储器来说，我们需用它临时存储信息，并逐次地从不同单元写入或获得信息。这种类型的存储器称作随机访问存储器（RAM）。在某些情况下，我们不想让存储器中的信息丢失。因此我们愿使用特殊技术写入存储器。如果写入只在物理改变连接时才能实现，那么这种存储器称为只读存储器（ROM）。如果相互连接的模式可由程序设定，那存储器叫做可编程只读存储器（PROM）。如果需要实现改写的情况，我们有可擦的可编程只读存储器（EPROM）。电可擦除的PROM缩写为EEPROM。

最新商务英语翻译课程教学大纲

商务英语翻译课程教学大纲 课程编码： 03050262406课程性质：专业方向课 课时： 36（20+16）学分：2 开课学期：第5学期先修课程：基础英语 适用专业：商务英语专业 课程简介： 《商务英语翻译》课程是为培养“英语+专业”的应用型涉外人才而设置，从英汉两种语言在表达上的差异入手，旨在通过向学生传授基本的翻译理论和技巧，并结合大量的实践训练，培养学生的翻译能力，从而提高其英语综合运用能力，并使学生能够胜任国际贸易中出现的各类实用文体以及简单的文字翻译工作。 一、课程教学目标 本课程以培养学生的翻译能力为目标，旨在使商务英语专业学生掌握和运用一些基本的翻译理论；能够在一些参考书的辅助下，熟练翻译名片、商标、标识、公司简介、产品说明、广告等商务英语方面的资料；能够掌握常见的组织机构的翻译方式；能够运用所学翻译技巧熟练翻译各类公关文稿；能够正确翻译商务信函和单证材料；能够正确熟练翻译各种常见商务报告，译文达意，格式恰当；能够辨识一些商务文本存在的翻译问题和错误。在大量实例训练中锻炼学生在商务语境下有效进行英汉、汉英互译、正确传达信息、顺畅开展交流的能力。 二、课程重点、难点 该课程教学重点是英语商务文本汉译的基本知识、理论和方法，难点是专业外贸知识及专业术语；跨文化交际理论与实践 三、整体课时分配

四、课程内容安排 （一）Unit1 Business Cards 主要内容：英汉名片的互译、设计和正确运用中英文商务名片、商务英语翻译中遵循正确的翻译原则 教学要求：帮助学生初步了解商务名片的互译特点与原则 其它教学环节：案例教学 （二）Unit 2 Signs 主要内容：商务环境中的常见中英文标识、中英文标识的语言特点及其常见翻译技巧 教学要求：帮助学生了解商务环境中的常见中英文标识，掌握常见翻译技巧 重点、难点：商务环境中的直译法和意译法 其它教学环节：情景教学 （三）Unit 3 Trademarks 主要内容：识别中英文商标、商标的翻译、转译法 教学要求：帮助学生了解中英文商标的翻译 重点、难点：商标翻译中的转译法 其它教学环节：案例教学 （四）Unit 4 Organizations 主要内容：识别组织机构名称、外来词翻译法 教学要求：帮助学生了解商务环境下常见的组织机构名称与外来词翻译 重点、难点：织机构名称 其它教学环节：交互教学 （五）Unit 5 Company Introductions 主要内容：公司简介翻译 教学要求：帮助学生掌握被动语态、名词从句、定语从句、状语从句和长句的拆合、转译。 重点、难点：长句的拆译，各类从句的转译 其它教学环节：案例教学 （六）Unit 6 Product Descriptions & Advertisement 主要内容：产品介绍的翻译和广告 教学要求：帮助学生掌握运用反译法进行英汉互译 重点、难点：反译法 其它教学环节：案例教学 （七）Unit 7 Business Contracts 主要内容：商务合同的翻译 教学要求：帮助学生掌握商务合同常见术语和句式、正确翻译常见合同文本、长句的处理

自动化专业英文简历

路飞（Monkey.D.Ruffy） political:communist Birthdate:1987-5-5 Address:Roomxxx,No.xx building,west block,Guangdong University of Technology, Higher Education Mega Center,Guangzhou Postalcode:510006 Mobile:xxxxxxxxxx E-mail:xxxxxx1@https://www.sodocs.net/doc/2815120668.html, Objective Education 2006.9-2010.7 Guangdong University of Technology Major: Automation Engineering Degree: Bachelor Specialized courses:Automatic Control Theory;Theory of Circuitry;Signal& Linear System; Principle of Microcomputer; C Language; Analogical Electronics; Digital Electronics; Pro- cedure Control and Auro-Measurement Technique ; Principle of Single-Chip Computer; Power Electronics Technology; Computer Control Technology; Electric Drive Control System; Electrical and Programmable Logic Controller Applied Technology(PLC);Motor Theory and Drive;Power Supply and Distribution Technology;Datebase(SQL) and so on. Personal expertise ?Master automatic control,computer control and process control,power technology; ?Skilled in the use of PLC ,SCM,C,assembler,matlab; ?Good use of Protel ,CAD,Photoshop,Word ,powerpoint and Excel; ?Master motor control,power electronics technology;good understanding of mechanical design principles,and mechanical analysis; ?Good rational thinking ability,Optimistic attitude towards life,adaptable;with good team spirit;responsible and honest;have a harmonious interpersonal relations with others. ?Language ability:Passed CET-4 446;Master automation professional English. Project Experience And Activities ?Two week of 2009/ 5 Temperature Control System Design Project Description: Design circuits, write procedures and control the temperature of Furnace at the required temperature which allow 1 to 2 C o error with SCM;This system must has the ability of refecting disturbance. ?2008/4 Attending Physics experiment Skills Competition of GDUT Project Description:I participate in the oscilloscope Group in this competition; The main requirement of the competition is to master the operation of oscilloscope and abilities to cope with some unexpected problems 2008.6-2009.6 Guangzhou ZhouHong Educational and Cultural Development Co., Ltd. Responsibilities: Part-time;The main task is making the courseware with PPT. Hobbies Reading,singing,outdoor activities,football,basketball,watching football games fishing and so on.

应聘英语翻译个人简历

应聘英语翻译个人简历 应聘英语翻译个人简历模板 姓名：性别：女年龄： 24岁学历：本科工作年限： 2年户口：广州市居住地：广东省广州市现任职位：英语翻译待遇要求： 3500--5000/月到岗时间： -- 希望地区：广州市深圳市东莞市希望岗位：英语翻译商务代表跟单员 自我评论英语八级，专业知识扎实，有良好的听说读写译能力，尤擅英语笔译。为人诚实守信、勤奋好学、大方开朗，可经常出差。曾多次前往越南胡志明市出差。 工作经验某公司 xx-02 - 至今公司性质：房地产、建筑、安装、装潢担任职位：英语翻译工作职责和业绩：翻译施工图纸、施工方案、施工规范、报批书、工期计划等文献资料；多次陪领带出差越南，担任陪同翻译。入职一个月后，便负责公司越南一大型国际集装箱码头项目的总翻译工作，深得领导好评（公司共三名翻译，其他两名均为老员工）建兴光电科技（广州）有限公司 xx-02 - xx-12 公司性质：计算机业担任职位：英语客服兼翻译工作职责和业绩：翻译上司交代的文件资料解决客户投诉问题客户来访时的接待工作浙江省浦江县白马锁业有限公司 xx-07 - xx-08 公司性质：五金矿产、金属制品担任职位：实习生工作职责和业绩：

xx年7月，我在浙江省浦江县白马锁业有限公司进行了为期一个月的实习。知晓了国际贸易的.一般流程，也加深了对“锁”的认识与了解。并且，自己的英语专长也在实际的环境中得以运用。比如说，曾运用英语跟一外国客户进行业务谈判，帮助一名外籍男子买到理想童鞋等。 教育经历兰州理工大学 xx-09 - xx-06 最高学历：本科专业名称：英语专业描述：主修课程：英语翻译理论、口译理论与实践、科技英语翻译、高级英语、高级口语、高级视听、高级英语写作、商务英语、旅游英语、英国文学、美国文学、英美概况等毕业设计：《一个女人的爱情---解析简.爱的个性特点与梦想》毕业论文答辩获一等奖 培训经历兰州市千圣小肥牛餐饮连锁有限公司 xx-05 - xx-05 培训课程：餐饮文化专业描述：了解肥牛文化以及餐饮服务礼仪 建兴光电科技（广州）有限公司 xx-02 - xx-03 培训课程：在职培训专业描述：了解公司的规章纪律、文化理念、产品类型及生产原理等等

自动化专业英语_考试版的文章翻译

UNIT 1 A 电路 电路或电网络由以某种方式连接的电阻器、电感器和电容器等元件组成。如果网络不包含能源，如 电池或发电机，那么就被称作无源网络。换句话说，如果存在一个或多个能源，那么组合的结果为有源网络。在研究电网络的特性时，我们感兴趣的是确定电路中的电压和电流。因为网络由无源电路元件组成，所以必须首先定义这些元件的电特性. 就电阻来说，电压-电流的关系由欧姆定律给出，欧姆定律指出：电阻两端的电压等于电阻上流过的电流乘以电阻值。在数学上表达为: u=iR (1-1A-1)式中 u=电压，伏特；i =电流，安培；R = 电阻，欧姆。 纯电感电压由法拉第定律定义，法拉第定律指出：电感两端的电压正比于流过电感的电流随时间的 变化率。因此可得到：U=Ldi/dt 式中 di/dt = 电流变化率，安培/秒； L = 感应系数，享利。 电容两端建立的电压正比于电容两极板上积累的电荷q 。因为电荷的积累可表示为电荷增量dq的和或积分，因此得到的等式为 u= ，式中电容量C是与电压和电荷相关的比例常数。由定义可知，电流等于电荷随时间的变化率，可表示为i = dq/dt。因此电荷增量dq 等于电流乘以相应的时间增量，或dq = i dt，那么等式 (1-1A-3) 可写为式中 C = 电容量，法拉。 归纳式(1-1A-1)、(1-1A-2) 和 (1-1A-4)描述的三种无源电路元件如图1-1A-1所示。注意，图中电流的参考方向为惯用的参考方向，因此流过每一个元件的电流与电压降的方向一致。 有源电气元件涉及将其它能量转换为电能，例如，电池中的电能来自其储存的化学能，发电机的电能是旋转电枢机械能转换的结果。 有源电气元件存在两种基本形式：电压源和电流源。其理想状态为：电压源两端的电压恒定，与从 电压源中流出的电流无关。因为负载变化时电压基本恒定，所以上述电池和发电机被认为是电压源。另一方面，电流源产生电流，电流的大小与电源连接的负载无关。虽然电流源在实际中不常见，但其概念的确在表示借助于等值电路的放大器件，比如晶体管中具有广泛应用。电压源和电流源的符号表示如图1-1A-2所示。 分析电网络的一般方法是网孔分析法或回路分析法。应用于此方法的基本定律是基尔霍夫第一定律，基尔霍夫第一定律指出：一个闭合回路中的电压代数和为0，换句话说，任一闭合回路中的电压升等于电压降。网孔分析指的是：假设有一个电流——即所谓的回路电流——流过电路中的每一个回路，求每一个回路电压降的代数和，并令其为零。 考虑图1-1A-3a 所示的电路，其由串联到电压源上的电感和电阻组成，假设回路电流i ，那么回路总的电压降为因为在假定的电流方向上，输入电压代表电压升的方向，所以输电压在（1-1A-5）式中为负。因为电流方向是电压下降的方向，所以每一个无源元件的压降为正。利用电阻和电感压降公式，可得等式(1-1A-6)是电路电流的微分方程式。 或许在电路中，人们感兴趣的变量是电感电压而不是电感电流。正如图1-1A-1指出的用积分代替式(1-1A-6)中的i，可得1-1A-7 UNIT 3 A 逻辑变量与触发器

中英文课程描述(计算机、自动化)

课程编号：070305 Code: 070305 课程名称：单片机及应用 Name: Principle and Application of Single Chip Microcomputer (SCM) 学时：44讲授学时，12实验学时 Hours : hrs lecture， hrs lab 学分：3 Credit： ` 课程简介：本课程介绍MCS-51单片机的功能结构、工作原理、指令系统、编程技术、接口技术和实际应用。通过该课程的学习，使学生初步具备简单的单片机应用系统的设计开发能力。 Brief introduction: This course shows the introductions to functional structure, principle, instructions, assemble language programming, interface and application of MCS-51single chip microcomputer. By the study of this course, the students can get the design and development ability of simple SCM application system. 课程编号：070306 Code : 070306 课程名称：计算机原理 Name: Principle of Microcomputer 学时：72讲授学时，16实验学时 ， Hours : hrs lecture， hrs lab 学分：4 Credit： 课程简介：本课程是计算机科学技术专业的一门专业基础课;该课程介绍主流微机的结构、指令及汇编语言程序设计和常用的接口电路。 Brief introduction: Principle of Microcomputer is a basic course of Computer Science and Technology; The course introduces the structure of

【个人简历】大学生英文自我介绍(带翻译)

大学生英文自我介绍（带 翻译） I think that since the admission, the school has to comply with the rules and regulations, has a good ideological and moral quality, outstanding performance. Have a strong collective sense of honor and sense of responsibility, adhere to the principle of practical work for things. I thought the correct Chikunailao can have lofty ideals and great goals, the importance of personal moral cultivation, the adoption of a healthy life style, helpful, concerned about national affairs. In school, I have been studying hard and assiduously, through systematic study and master a solid foundation of knowledge. After school hours, I actively participated in physical training, enhance physical fitness, loves labor

课程简介 英文翻译

Code of the Course: Name of the Course: Mao Zedong Thought, Deng Xiaoping Theory and the “ Three Represent Thought” Total Teaching Hours: 68 hours Credit: 4 credits Department: School of Social Development Compulsory Course Introduction of the Course: The course is a public compulsory one, which is about basic theory, aims to carry out and implement the spirit of Party of China, to cultivate the common university students to master the scientific system and spiritual essence of Mao Zedong Thought, Deng Xiaoping Theory and the “ Three Represent Thought”. The course consists of the scientific meaning of Chinese Marxism, historical process and three theoretical achievements; ideological guidelines of the CPC; new democratic revolution theory; socialism transforming theory; socialist essential theory; socialist harmonious society; diplomatic routines and “one country, two systems” theory; and the dependable forces and leading core of socialism with Chinese characteristics. Students can master the basic fame and main contents of socialism with Chinese characteristics; can improve their comprehensive quality and the ability of combining theory with practice by learning this course. Reference Books: 1.毛泽东.《反对本本主义》，《星星之火，可以燎原》，《〈共产党人〉发刊词》. 北京：人民出版社，1991 2.邓小平.《坚持党的思想路线，改进工作方法》，《邓小平文选》第1卷，《邓 小平文选》第3卷. 北京：人民出版社,1993 3. 江泽民.《论“三个代表”》，《论党的建设》.北京：中央文献出版，2002

自动化岗位面试求职英文自我介绍范文

提供专业的word版文档，优质的服务，希望对您有帮助/双击去除 自动化岗位面试求职英文自我介绍范文generalIntroduction* IamathirdyearmastermajorinautomationatshanghaiJiaoT onguniversity,p.r.china. educationbackground In1995,IenteredtheNanjinguniversityofscience&Techno logy(NusT)--widelyconsideredoneofthechina’sbestengineeringschools.Duringthefollowingundergrad uatestudy,myacademicrecordskeptdistinguishedamongth ewholedepartment.IwasgrantedFirstclassprizeeverysem ester,andmyoverallgpA(89.5/100)rankedNo.1among113st udents.In1999,Igottheprivilegetoenterthegraduatepro

gramwaivedoftheadmissiontest.IselectedtheshanghaiJi aoTonguniversitytocontinuemystudyforitsbestreputati ononcombinatorialoptimizationandNetworkschedulingwh eremyresearchinterestlies. Attheperiodofmygraduatestudy,myoverallgpA(3.77/4.0) rankedtop5%inthedepartment.Inthesecondsemester,Ibec ameteacherassistantthatisgiventotalentedandmatureds tudentsonly.Thisyear,IwontheAcerscholarshipastheone andonlycandidateinmydepartment,whichistheultimateac coladefordistinguishedstudentsendowedbymyuniversity .presently,Iampreparingmygraduationthesisandtryingf orthehonorofexcellentgraduationThesis. researchexperienceandacademicactivity whenasophomore,IjoinedtheAssociationofAIenthusiasta ndbegantonarrowdownmyinterestformyfutureresearch.In 1997,Iparticipatedinsimulationtooldevelopmentforthe schedulingsysteminprof.wang’

电气自动化专业英语翻译

电气自动化专业英语（翻译1-3） 第一部分：电子技术 第一章电子测量仪表 电子技术人员使用许多不同类型的测量仪器。一些工作需要精确测量面另一些工作只需粗略估计。有些仪器被使用仅仅是确定线路是否完整。最常用的测量测试仪表有：电压测试仪，电压表，欧姆表，连续性测试仪，兆欧表，瓦特表还有瓦特小时表。 所有测量电值的表基本上都是电流表。他们测量或是比较通过他们的电流值。这些仪表可以被校准并且设计了不同的量程，以便读出期望的数值。 1．1安全预防 仪表的正确连接对于使用者的安全预防和仪表的正确维护是非常重要的。仪表的结构和操作的基本知识能帮助使用者按安全工作程序来对他们正确连接和维护。许多仪表被设计的只能用于直流或只能用于交流，而其它的则可交替使用。注意：每种仪表只能用来测量符合设计要求的电流类型。如果用在不正确的电流类型中可能对仪表有危险并且可能对使用者引起伤害。 许多仪表被设计成只能测量很低的数值，还有些能测量非常大的数值。 警告：仪表不允许超过它的额定最大值。不允许被测的实际数值超过仪表最大允许值的要求再强调也不过分。超过最大值对指针有伤害，有害于正确校准，并且在某种情况下能引起仪表爆炸造成对作用者的伤害。许多仪表装备了过载保护。然而，通常情况下电流大于仪表设计的限定仍然是危险的。 1．3测量仪器的使用 电压表是设计来测量电路的电压或者通过元器件的压降。电压表必须与被测量的电路或元器件并联。 1．3．1压力检验计 交-直流电压检验计是一种相当粗糙但对电工来说很有用的仪器。这种仪器指示电压的近似值。更常见类型指示的电压值如下：AC，110，220，440，550V，DC，125，250，600V。许多这种仪器也指示直流电的极性。那就是说(i.e=that is)电路中的导体是阳性（正）的还是阴性（负）。 电压检验计通常用来检验公共电压，识别接地导体，检查被炸毁的保险丝，区分AC和DC。电压检验计很小很坚固，比一般的电压表容易携带和保存。图1。31。4描述了用电压检验计检查保险丝的用法。 为了确定电路或系统中的导体接地，把测试仪连接在导体和已建立的地之间。如果测试仪指示了一个

电气工程及其自动化英语介绍

The electrical engineering fastens of automation profession introduction Automating the professional development can be engaged in electrical engineering and it automates related realm to work of, special feature fresh clear compound type deluxe engineering technique talented person, particularly for pay attention to a student to obtain to know the development of ability and overall character of knowing. The professional graduate student adapts to ability strong, employment noodles breadth, employment rate Gao, the three years employment rate attains 100%.Graduate student mainly in the electric power system Research, design, production, experiment, construction, management, education etc. unit employment, be engaged in establishing of electric power system, power plant and related industrial realm electrical engineering to account, circulate, install , Adjust to try, research teaching, technique development, technocracy etc. unit employment. The electrical engineering and its automation profession introduces The antenna of electrical engineering and its automation stretches toward every trade, small greatly arrive the research of astronautics airplane to the design of a switch, all have its figure. The professional student can Be engaged in electrical engineering- related system to circulate, the automatic control, electric power electronics technique, information handle, experiment technique, develop development, economy management and electronics and calculator technique Apply the work of waiting the realm, is the breadth caliber"compound type" deluxe engineering technique talented person.The need of realm to level talented person of Gao is very big.According to the estimate, get into along with the foreign big business enterprise , Will appear very big indentation in this professional realm, may appear the phenomenon of talented person's supply falls short of demand very much at that time.A, profession synthesize to introduce electrical engineering and it automation the profession is electricity letter A newly arisen academics of interest realm, but because of with people's daily life with and industry produce closely related, develop very quickly, also opposite more mature now.Have already become Gao Xin The importance of the technique industry constitutes part, extensively is applied to realms, such as industry, agriculture and national defense...etc., develop a more and more important function in the national economy. Control a theory and electric power net reason The theory is an electrical engineering and automates professional foundation, the electric power electronics technique, calculator technique is also then its main technique means, included system analysis, system design and system at the same time Development and system management and decision etc. grind to investigate realm. The

个人简历的英文翻译

个人简历的英文翻译 George Mathew 25th Mainland, Near somokrith Bridge New Jersey Home: 00235-4587-03258 Cell: 00254-1258-9875 Email: Mathew.george@music world.co.in Career Profile: A skilled, creative and enthusiastic Disc Jockey with more than ten years of experience in the concerned field. Expertise in linking, playing and presenting records, interviewing guest on radios in three different stations and in hosting phone-ins. Looking for a challenging position to utilize my strengths and experience in a well reputed organization Core Competencies: ?Possess in-depth knowledge of developing community involvement programs ?Skills to adapt to a number of radio program formats ?In-depth knowledge of technical aspects of radio sound production ?Self -managing, self-motivated, positive, enthusiastic with can -do attitude ?Knowledge of basic operating systems ?Diverse knowledge of musical genre for different age groups ?Competent with audio equipment, hook-up and set up ?Strong interpersonal, communication and listening skills ?In-depth knowledge of audience taste ?Available 24 hour service Professional Experience: New Jersey radio music service, New Jersey 20XX till date Disc Jockey ?Handled the tasks of interviewing famous musical personalities ?Announced radio programs based on selected music ?Delivered comments on traffic condition, weather, time and music ?Updated latest movies and music releases to listening audiences ?Entertained radio audiences who called up with musical request