搜档网
当前位置:搜档网 › DIN&ISO-GB标准紧固件号对照表

DIN&ISO-GB标准紧固件号对照表

DIN&ISO-GB标准紧固件号对照表
DIN&ISO-GB标准紧固件号对照表

Bolts Screws

Studs

Nuts

Washer

s

Set

Screws Tappin

g Screws

Pins Keys

Ret

ain ing Insert s

Rivets

等效等效参考

参考参考参考参考

下列表中DIN 标准和NON 标准没有填写的部分是与国标没有相应的对应关系;参考部分不能完全替代,设计者可根据设计要求进行选择。

ISO4014 - Hexagon head bolts

DIN7968 - Hexagon fit bolts for structural steel bolting

DIN7969 - Slotted countersunk head fit bolts for structural steel bolting DIN6921 - Hexagon flange bolts DIN580 - Lifting eyebolts

ISO8765 - Hexagon head bolts, with fine pitch thr DIN609 - Hexagon fit bolts

DIN444 - Eyebolts DIN603 - Round head square neck bolts GB/T5787-86GB/T14-98GB798-88 GB/T5782-2000

GB/T5785-2000

GB27-88

GB825-88

等效等效等效等效

等效

等效等效

等效

参考等效

等效

参考等效等效

GB/T67-2000GB/T68-2000

GB/T5783-2000GB/T5786-2000

GB/T70.1-2000

GB6191-86GB5281-85

GB/T70.2-2000GB2673-86六角头螺栓,全螺纹

ISO2009 - Slotted csunk head screws

NON1241 - Hexagon head screws, with serrated flange

ISO4762 - Hexagon socket head cap screws

DIN7984 - Hexagon socket thin head cap screws ISO7379 - Hexagon socket head shoulder screws ISO7380 - Hexagon socket button head screws DIN7991 - Hexagon socket flat head screws ISO1580 - Slotted pan head screws ISO4017 - Hexagon head screws

ISO8676 - Hexagon head screws, with fine pitch thread

GB/T818-2000GB/T819.1-2000GB/T820-2000ISO7045 - Crossed recessed pan head screws ISO7046 - Crossed recessed csunk flat head screws

ISO7047 - Crossed recessed raised csunk head screws

ISO4018 - Hexagon head screws

GB/T5781-2000

六角头螺栓

ISO4014 - Hexagon head screws

GB/T5782-2000

等效等效

参考

参考参考参考

参考参考参考

GB897-88GB897-88GB15389-94

GB902.2-89GB902.3-89

GB902.3-89

GB834-88

GB/T65-2000

GB/T69-2000DIN316 - Wing screws

NON1243 - Crossed recessed pan head screws

DIN464 - Knurled thumb screws ISO2010 - Slotted raised csunk head screws ISO1207 - Slotted cheese head screws

DIN921 - Slotted pan head screws with large head

DIN939 - Studs (with interference thread)DIN975 - Threaded rod

DIN939FO - Studs (without interference

thread)

NON9801 - Self-clinching studs

NON9802 - Self-clinching standoffs, blind NON9804 - Self-clinching studs for PC boards NON9803 - Self-clinching standoffs, thru-hole DIN32500P - Threaded studs for stud welding,non-flanged

DIN32501GA - Threaded studs for stud welding,

tip ignition

DIN32501SIA - Internal threaded studs for stud welding, tip ignition

等效等效等效等效等效

参考参考参考参考参考参考参考等效等效

GB/T6172.1-2000GB/T6177.1-2000GB825-88GB/T6171-2000GB62-88GB39-88GB/T13681-92GB/T889.1-2000

GB/T6185.1-2000

GB/T6173-2000

GB/T6178-86GB923-88GB805-88ISO7040 - Prevailing torque hexagon nuts with

non-metallic inserts

DIN582 - Lifting eye nuts DIN315 - Wing nuts ISO7042 - Prevailing torque all-metal hexagon

nuts

ISO4035 - Hexagon thin nuts ISO4161 - Hexagon nuts with flange ISO8673 - Hexagon nuts with fine pitch threads

ISO8675 - Hexagon thin nuts with fine pitch threads

NON7201 - Hexagon nuts with serrated flange DIN555 - Hexagon nuts (Nylon)DIN935 - Hexagon castle nuts ISO4032 - Hexagon nuts GB/T6170-2000DIN917 - Hexagon cap nuts DIN7967 - Self-locking (PAL) nuts DIN562 - Flat square nuts DIN929 - Hexagon weld nuts

等效等效

参考

参考

参考

参考

参考

GB/T6184-2000

GB/T6183.1-2000

NON7208 - Self-clinching nuts NON7206 - Rivet nuts

NON7207 - Self-clinching nuts for printed circuit boards

ISO7719 - Prevailing torque all-metal hexagon

nuts

ISO7043 - Prevailing torque hex nuts w/flange and non-metallic inserts

NON7205 - Self-clinching nuts

DIN508 - T-nuts

NON7202 - Hexagon lock nuts with attached conical spring washers

DIN128A - Curved spring lock washers

GB955-87DIN434 - Square beveled washers for channels

(8%)

NON7203 - Hexagon lock nuts with lock washers NON7204 - Hexagon lock nuts with conical spring washers

DIN435 - Square beveled washers for I-beams (14%)

GB853-88

GB852-88GB7245-87DIN127 - Helical spring lock washers DIN137 - Spring washers, wavy GB93-87

参考

参考

参考

等效

等效

参考

参考

参考

参考

参考

GB854-88GB/T97.1-2002GB/T96.1-2002GB/T96.2-2002

GB/T97.2-2002DIN432 - Locking tab washers DIN7349 - Plain washers, thick

DIN93 - Tab washers with long tabs ISO7416 - High-strength structural washers DIN463 - Tab washers with long and short tabs GB96-85GB855-88DIN7989A - Plain washers for steel construction

GB856-88ISO7089 - Plain washers - normal series ISO7093 - Plain washers - large series DIN2093 - Disc springs

DIN6797A - External tooth lock washers washers

DIN6797J - Internal tooth lock washers washers

DIN6798A - External serrated lock washers NON1301 - Internal tooth lock washers (cupped)

NON1302 - Internal/external serrated lock washers

GB862.1-87GB861.1-87GB861.2-87DIN6796 - Conical spring washers

参考

等效

等效

等效

等效

等效

等效

等效

等效

等效

等效

GB845-85

GB846-85GB847-85GB/T80-2000GB71-85GB849-88GB850-88

ISO7434 - Slotted set screws with cone point GB73-85GB5285-85ISO7051 - Crossed recessed raised csunk head tapping screws

ISO1479 - Hexagon head tapping screws

ISO7049 - Crossed recessed pan head tapping screws

ISO7050 - Crossed recessed countersunk flat head tapping screws

ISO4766 - Slotted set screws with flat point DIN5419 - Felt rings ISO4029 - Hexagon socket set screws with cup point

ISO4028 - Hexagon socket set screws with dog point

ISO4026 - Hexagon socket set screws with flat

point

ISO4027 - Hexagon socket set screws with cone

point

DIN6319C - Spherical washers DIN6319G - Conical seats

GB/T77-2000

GB/T78-2000

GB/T79-2000

等效

等效

等效

参考

参考

参考

参考

参考

参考

参考

参考参考

TYPE B w/ split pin hole

GB880-86GB951-86TYPE A w/o split pin hole

GB/T5856.1-95

GB/T15856.4-95GB/T15856.2-95GB5282-85GB5283-85GB6563-86GB6561-86GB6560-86GB5284-85ISO2340 - Clevis pins, without head

NON1242 - Crossed recessed oval head thread rolling screws

DIN7504N - Crossed recessed pan head self-drilling screws

DIN7504K - Hexagon head self-drilling screws DIN7504P - Crossed recessed countersunk head self-drilling screws

ISO1483 - Slotted raised countersunk head tapping screws

DIN7500C - Crossed recessed pan head thread rolling screws

DIN7500D - Hexagon head thread rolling screws DIN7500M - Crossed recessed countersunk head thread rolling screws

DIN7997 - Crossed recessed countersunk head wood screws

ISO1481 - Slotted pan head tapping screws ISO1482 - Slotted countersunk head tapping screws

GB882-86

ISO2341 - Clevis pins, with head

参考

等效

等效

等效

等效

等效

等效

等效

等效

等效

DIN1434 - Clevis pins, with head

(DIN1434 has been cancelled, superseded by ISO2341)

GB882-86

TYPE A w/o split pin hole

TYPE B w/ split pin hole

ISO8748 - Spring-type straight pins coiled,heavy duty

ISO8750 - Spring-type straight pins coiled,standard duty

ISO8740 - Grooved pins, full-length parallel grooved with chamfer

ISO8741 - Grooved pins, half-length reverse taper grooved

ISO8745 - Grooved pins, half-length taper grooved

ISO8752 - Spring-type straight pins, slotted GB/T879.4-2000GB/T13829.1-92(TYPEB)GB/T13829.2-92(TYPEC)NON8101 - Spring-type straight pins, with serrated slot

TYPE A

TYPE B

ISO2338 - Parallel pins, unhardened

TYPE A

ISO2339 - Taper pins, unhardened

GB/T117-2000

ISO8744 - Grooved pins, full-length taper grooved

GB/T119.1-2000

GB/T879.3-2000

GB/T13829.2-92(TYPEA)GB/T13829.2-92(TYPEB)GB/T879-2000

等效

参考

等效

参考

参考

参考

参考

DIN6325 - Parallel pins, hardened (Dowel pins)

ISO8737 - Taper pins with external thread,unhardened

GB/T881-2000

GB119.2-2000

GB/T91-2000

ISO1234 - Split pins TYPE B

Keys

GB/T1565-1979

DIN6887 - Taper keys with gib head DIN6888 - Woodruff keys GB/T1096-1979

GB/T1564-1979

DIN6885 - Rectangular or square parallel keys TYPE A

TYPE B

DIN6886 - Taper keys TYPE A

TYPE B

GB/T1099-1979

Retaining Rings

参考参考参考参考DIN471 - Retaining rings for shafts, normal duty DIN472 - Retaining rings for bores, normal

duty

GB894.2-86GB893.2-86NON25101 - Helical coil inserts

DIN6799 - Circlips DIN988 - Shim rings and Supporting rings

GB896-86 DIN660 - Round head rivets

GB867-86DIN16903 - Insert nuts for plastic moldings

C级

相关主题