接近开关接线图|选型|厂家|接线图|NPN|PNP|电气符号|型号|品牌|24v 接近开关实物接线图|二线接近
Inductivesensor 磁控开关CK-AD
?
Only for non-ferrous metals ?
20 mm non-flush ? 4-wire DC
参数表节选:的技术参数磁控开关CK-AD General specifications
Switching function complementary
Output type PNP
Rated operating distance 20 mm
Installation non-flush
Output polarity DC
Assured operating distance 1 ... 16.2 mm
Reduction factor r Al 1
接近开关接线图|选型|厂家|接线图|NPN|PNP|电气符号|型号|品牌|24v 接近开关实物接线图|二线接近Reduction factor r Cu
1 Reduction factor r St37 0
Reduction factor r Brass 1 (Minimum distance: 2 mm)
Nominal ratings
Operating voltage 10 ... 30 V
Switching frequency 0 ... 200 Hz
Hysteresis typ. 5 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Voltage drop ≤ 3 V
接近开关接线图|选型|厂家|接线图|NPN|PNP|电气符号|型号|品牌|24v 接近开关实物接线图|二线接近Operating current
0 ... 200 mA No-load supply current ≤ 20 mA
Operating voltage indicator LED, green
Switching state indicator LED, yellow
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
接近开关接线图|选型|厂家|接线图|NPN|PNP|电气符号|型号|品牌|24v 接近开关实物接线图|二线接近Connection type
terminal compartment Information for connection A maximum of two conductors with the same core cross section may be mounted on
tightening torque 1.2 Nm + 10 %
Core cross-section up to 2.5 mm 2
Minimum core cross-section without wire end ferrule 0.5 mm 2 , with connector sleeves 0.34 mm 2
Maximum core cross-section without wire end ferrule 2.5 mm 2 , with connector sleeves 1.5 mm 2 Housing material PBT
Sensing face PBT
Degree of protection
IP68