炼厂主要装置中英文及缩写
NOTE:
(*1)
有时,整个常减压蒸馏装置也被统称为Crude Distillation Unit(原油蒸馏单元)。
(*2)
几套加氢装置包括汽油、煤油、柴油有时会采用其它的简写形式,如DHF,因为加氢装置有加氢改质和加氢精制。
(*3)
制氢装置在炼厂中被称为了PSA,大家上次争论的PSA是制氢还是制氮问题,如果我没有记差,PSA 是变压吸附的意思,是一种生产工艺,所以可能制氢、制氮都可以采用这种工艺。
炼厂自产氢气的装置实际上是CCR装置。
(*4)
炼厂中不一定包含上述所有的生产装置,取决于炼厂的原油性质及产品目标。
(*5)
装置的缩写,各家公司有自己的习惯,不是很统一。个人感觉关键还是记住全名吧。
几种常见油品的英文
石脑油naphtha
汽油 gasoline
煤油 kerosene
柴油 diesel
瓦斯油/蜡油 gas oil
AGO 常压瓦斯油/常压蜡油
LVGO减压轻瓦斯油/减压轻蜡油
HVGO减压重瓦斯油/减压重蜡油
渣油 residue
AR 常压渣油
VR 减压渣油
常用工具中英文对照 扳手Wrenches/套筒Sockets 开口扳手 Open End Wrenches 梅花扳手 Spline End Wrenches 块扳手 Crowfoot Wrenches 开口/梅花扳手 Combination Wrenches 内六角扳手 Hex Wrenches 平板棘轮扳手 Slab Ratchet 棘轮扳手 Ratchet Wrenches 力矩扳手 Torque Wrenches 管钳 Pipe Wrenches 活动扳手 Adjustable Wrenches 六角套筒 Six Point Sockets 梅花套筒 Twelve Point Sockets 万向套筒 Universal Sockets 转接头 Adaptor 套筒接杆 Socket Extension 万向转接头 Universal Joint 螺刀Screwdrivers 快速螺刀 Fast Screwdrivers 仪表螺刀 Electronic miniature Screwdrivers
十字头螺刀 PILLIPS Screwdrivers 磁性螺刀 Magnetic Screwdrivers 一字头螺刀 Flat Tip Screwdrivers 摇把 Speeders 钳Pliers 尖嘴钳 Needle Nose Pliers 大力钳 Locking Pliers 保险丝钳 Safety Wire Twisters 鹰嘴钳 Adjustable Joint Pliers 插头钳 Connector Plug 剥线钳 Wire Strippers 鱼口钳 Combination Slip-Joint Pliers 卡环钳 Convertible Snap Ring Pliers 剪线钳 Diagonal Cutters 压线钳 Wire Crimpers 电气工具Electronic Tools 矿灯 Safety Lamb (Mine r’s Lamb) 手电 Flashing Light 对讲机 Interphone 电烙铁 Electronic Iron 耳机 Earphone 防静电手腕 Static Wrist
机械专业英语词汇 陶瓷 ceramics 合成纤维 synthetic fibre 电化学腐蚀electrochemical corrosion 车架 automotive chassis 悬架 suspension 转向器 redirector 变速器 speed changer 板料冲压 sheet metal parts 孔加工 spot facing machining 车间 workshop 工程技术人员 engineer 气动夹紧 pneuma lock 数学模型 mathematical model 画法几何 descriptive geometry 机械制图 Mechanical drawing 投影 projection 视图 view 剖视图 profile chart 标准件 standard component 零件图 part drawing 装配图 assembly drawing 尺寸标注 size marking 技术要求 technical requirements
刚度 rigidity 内力 internal force 位移 displacement 截面 section 疲劳极限 fatigue limit 断裂 fracture 塑性变形 plastic distortion 脆性材料 brittleness material 刚度准则 rigidity criterion 垫圈 washer 垫片 spacer 直齿圆柱齿轮 straight toothed spur gear 斜齿圆柱齿轮 helical-spur gear 直齿锥齿轮 straight bevel gear 运动简图 kinematic sketch 齿轮齿条 pinion and rack 蜗杆蜗轮 worm and worm gear 虚约束 passive constraint 曲柄 crank 摇杆 racker 凸轮 cams 共轭曲线 conjugate curve
机械专业英语词汇 合成纤维synthetic fibre 电化学腐蚀electrochemical corrosion 车架automotive chassis 悬架suspension 转向器redirector 变速器speed changer 板料冲压sheet metal parts 孔加工spot facing machining 车间workshop 工程技术人员engineer 气动夹紧pneuma lock 数学模型mathematical model 画法几何descriptive geometry 机械制图Mechanical drawing 投影projection 视图view 剖视图profile chart 标准件standard component 零件图part drawing 装配图assembly drawing 尺寸标注size marking 技术要求technical requirements 刚度rigidity 内力internal force 位移displacement 截面section 疲劳极限fatigue limit 断裂fracture 塑性变形plastic distortion 脆性材料brittleness material 刚度准则rigidity criterion 垫圈washer 垫片spacer 直齿圆柱齿轮straight toothed spur gear 斜齿圆柱齿轮helical-spur gear 直齿锥齿轮straight bevel gear 运动简图kinematic sketch 齿轮齿条pinion and rack 蜗杆蜗轮worm and worm gear 虚约束passive constraint 曲柄crank
木工机械专业词汇中英 文对比 Document serial number【KKGB-LBS98YT-BS8CB-BSUT-BST108】
一画 一字螺丝批 slot type screwdriver 一点透视 one-point perspective 二画 二合一黏合剂 epoxy resin adhesive 二合胶;混合胶 epoxy glue 二维的;平面的 two-dimensional 二进制 binary 二极管;整流子 diode 二号螺丝攻 second tap 二路开关 two-way switch 十进制的;公制的 metric 人工制品 artefact 人造板 man-made board 人体工程学 ergonomics; human engineering 人体尺寸 human dimension 人体测量学 anthropometry; anthropometrics 刀片 blade 刀身 blade 刀具 tool 刀具溜座 carriage 刀柱 tool post 刀架 tool rest 刀架底座 tool rest bracket 刀座帷;床鞍 apron 刀座鞍;溜板座 saddle 力 force 力三角形 triangle of force 力平行四边形 parallelogram of force 力多边形;多边形力学 polygon of force 力的分解 force resolution 力架;亮漆 lacquer 力矩 moment 力偶 couple 力矩定律 law of moment 力-距离图表 force-distance graph 力图 force diagram 力线 line of force 力点 effort 十字榫 cross halving joint 十字螺丝 Philip's head screw 十字螺丝批 Philip's type screwdriver 丁字尺;T 尺 tee square三画三爪夹头 three-jaw chuck 三角尺 set square 三角形结构系杆 triangulation tie 三角锉 triangular file 三维的;立体的 three-dimensional 三氯甲烷;哥罗芳 chloroform 三聚氰胺;蜜胺 melamine 三点透视 three-point perspective 上油漆 painting 上釉 enamelling 凡立水 varnish 叉形顶尖 fork centre 口罩 mask 士力;虫漆 shellac 士巴拿;扳手 spanner 大芯夹板;宽条芯夹板 blockboard; solid corestock-laminated board 大量制造 mass production 子口刨;槽口刨;边刨 rebate plane 小型平槽刨 miniature router plane 小型线料弯曲器 small wire bender 小型弯折机 mini bender 小型电路断路器;跳菲 miniature circuit breaker (MCB) 小齿轮 pinion 山樟 San Cheong 工件 workpiece 工字梁 I beam 工作面 working surface 工作图;制作图 working drawing 工作台 bench; working table 工具 tool 工具贮存室 tool storage 工具槽 well
保留建筑EXISTING BUILDING 已建建筑AS-BUILT 新建建筑NEW BUILDING 道路ROADWAY 绿化LANDSCAPE 汽车流线CAR ACCESS 行人流线WALK ACCESS 消防车流线FIRE BRIGADE ACCESS 货车流线TRUCK ACCESS 自行车流线BICYCLE ACCESS 消防车道FIRE WAY 主出入口MAIN ENTRENCE 保安室NO.1 GUARD HOUSE 主出入口 1 EXIT 1 地下车库出口BASEMENT PARKING EXIT 自行车停车场BICYCLE PARKING 自行车停车位BICYCLE STAND 总停车位CAR PARK 其中INCLUDE 地上停车位AT-GRADE CAR PARK 地下停车位UNDERGROUND CAR PARK 空调管线AIR CONDITIONING 强电电缆LV 10KV 弱电电缆ELV 电缆10KV HV 供水管SUPPLY WATER 污水管WASTE WATER 雨水管RAIN WA TER 消防管线FIRE HYDRANT 西门子(中国)总部SIEMENS CENTER BEIJING 说明NOTE 1.本图依据城市道路高程及市政管线标高等 资料并结合场地排水、场地地形、土方平衡 等因素进行竖向设计。 1.THE DRAWING WITH "VERTICAL HEIGHT DESIGN" IS BASED ON CITY ROADWAY ENGINEERING WITH CITY BUREAU PIPELINE HEIGHT INDICATION DOCUMENT SITE DRAINAGE, SITE TOPOGRAPHY, AND SOIL BALANCE ARE INCORPORA TED INTO THE DESIGN. 2.本图所用坐标系统为北京市城市坐标系统, 所用高程为规划高程。 2.THE DRAWING INCORPORATES BEIJING CITY COORDINA TE SYSTEM. ALL THE INDICATIVE HEIGHTS ARE PLANNING HEIGHTS. 3.图中道路横坡按1.5%设计,最小纵坡为 0.2%。 3.ALL THE ROADWAY INDICATED ON THE DRAWING IS BASED ON 1.5%HORIZONTAL SLOPE.THE SMALLEST VERTICAL SLOPE IS 0.2%. 4.图中标注单位均为米。 4.BASIC UNIT OF MEASUREMENT IS METRIC. 保留建筑EXISTING BUILDING 已建建筑AS-BUILT 新建建筑NEW BUILDING 道路ROADWAY 绿化LANDSCAPE 地下车库入口BASEMENT PARKING ENTRANCE 坡道RAMP 消防车道FIRE WAY 紧急出口EMERGENCY EXIT 3 2#保安室NO.2 GUARD HOUSE 停车场PARKING 工程地点位置图SITE LOCATION 图例LEGEND 自行车停车场BASEMENT EXIT 1 BICYCLE PARKING H=4.8M 地下室出入口 2 BASEMENT EXIT 2 主出入口 4 PARKING EXIT 4 主出入口 1 EXIT 1 道路ROADWAY 实土绿化COMPACTED SOIL LANDSCAPE 敷土绿化DEPOSITED SOIL LANDSCAPE 通风井VENTILATION OUTLET 冷却塔(两组) COOLING TOWER(2 UNITS) 紧急通道EMERGENCY ACCESS 绿地LANDSCAPE 围挡BARRIER 停车场PARKING 地下车库出入口PARKING ENTRENCE 主出入口MAIN ENTRENCE 1#保安室NO.1 GUARD HOUSE 说明NOTE 1.图中所标注建筑尺寸为外墙皮尺寸. 1.DIMENSIONS INDICA TED ON THE PLAN ARE MEASURED TO EXTERNAL EDGE OF THE BUILDINGS. 2.建筑的坐标点为轴线交点坐标. 2.ARCHITECTURE COORDINATES = INTERSECTION OF THE BUILDINGS AXIS. 3.本图以米为单位,%%P0.000相当于绝对标 高37.75. 3.METRIC SYSTEMS ARE THE UNIT OF MEASUREMENT. 4.本项目对周边现状及规划建筑日照影响满 足相关法规及规范要求, 即日照时数满足大寒日最低2小时的日照要 求. 4.DESIGN COMPLIES WITH LOCAL REGULATION OF SUN SHADING TO NEIGHBORHOOD. 保留建筑面积EXISTING BUILDING 容 积率PLOT RATIO 建筑占地面积BUILDING COVERAGE 建筑密度BUILDING DENSITY 绿化面积GREEN AREA 绿地率GREEN RATIO 总人数TOTAL USERS 机动车停车位CAR PARK 地上其辆65 65 LOTS ABOVE GROUND 地下辆564 中INCLUDE UNDERGROUND 564 LOTS 200辆自行车停车位BICYCLE STAND 200 LOTS 地上辆200 200 LOTS ABOVE GROUND 服务中心SERVICE CENTRE 1号办公楼OFFICE 1 地上
机械专业英语词汇中英文对照翻译一览表 陶瓷ceramics 合成纤维synthetic fibre 电化学腐蚀electrochemical corrosion 车架automotive chassis 悬架suspension 转向器redirector 变速器speed changer 板料冲压sheet metal parts 孔加工spot facing machining 车间workshop 工程技术人员engineer 气动夹紧pneuma lock 数学模型mathematical model 画法几何descriptive geometry 机械制图Mechanical drawing 投影projection 视图view 剖视图profile chart 标准件standard component 零件图part drawing 装配图assembly drawing
尺寸标注size marking 技术要求technical requirements 刚度rigidity 内力internal force 位移displacement 截面section 疲劳极限fatigue limit 断裂fracture 塑性变形plastic distortion 脆性材料brittleness material 刚度准则rigidity criterion 垫圈washer 垫片spacer 直齿圆柱齿轮straight toothed spur gear 斜齿圆柱齿轮helical-spur gear 直齿锥齿轮straight bevel gear 运动简图kinematic sketch 齿轮齿条pinion and rack 蜗杆蜗轮worm and worm gear 虚约束passive constraint 曲柄crank 摇杆racker
碳钢弯头 Carbon Steel Elbow 不锈钢弯头 Stainless Steel Elbow 高压弯头 High-Pressure Elbow 同心异径管 Concentric Reducers 偏心异径管 Eccentric Reducers 高压异径管 High-pressure Reducers 不锈钢等径三通 Stainless Straight Tee 碳钢等径三通 Carbon Straight Tee 不锈钢等径四通 Stainless Straight Cross 高压三通 High-pressure Tee 锻制三通 Forged Tee 异径接头 Template 管帽 Caps 法兰flange 长径和短径弯头 long and short radius elbows 同心和偏心异径接头 concentric and eccentric reducers 等径和异径三通 straight and reducing outlet tees 大小头 CONCENTRIC REDUCER 相等的三通Tee Equal 等径三通Straight Tee 异径三通Reducing Tee 等径四通Straight Cross 90°短半径弯头90°SS Elbow(SR) U型管Return Bend
90°长半径弯头90°SS Elbow (LR) 高压厚壁弯头Thickness Elbow 盲法兰Blank Flange 弯管Bends 翻边stub ends 异径接头reducers 公称通径 nominal diameter 外径(mm) outside diameter 中心距至端面的距离 center to end 理论重量(kg/pcs) approx weight 类种description 标准Standard 类型Design 材质Material 双丝头 Nipple 同心异径短节 SWAGE Nipple 活接头 Union PLUG HEX HEAD六角管堵 PLUG HEX HEAD SCRD六角螺纹管堵 MPT螺纹 RC螺纹螺桩 stud SWAGE (CONC)同 心异径短节 单承口管箍 Half-Coupling 异径管箍Coupling, Reducing 盲板 Blind Flange 带双圈的盲板spectacle blind 偏心的Ecentric 等径直通equal coupling 内牙直通 female coupling 外牙直通 straight tube with outside 90等径弯头 90 equal elbow 45等径弯头 45 equal elbow
扳手Wrenches/套筒Sockets 开口扳手 Open End Wrenches 梅花扳手 Spline End Wrenches 块扳手 Crowfoot Wrenches 开口/梅花扳手 Combination Wrenches 内六角扳手 Hex Wrenches 平板棘轮扳手 Slab Ratchet 棘轮扳手 Ratchet Wrenches 力矩扳手 Torque Wrenches 管钳 Pipe Wrenches 活动扳手 Adjustable Wrenches 六角套筒 Six Point Sockets 梅花套筒 Twelve Point Sockets 万向套筒 Universal Sockets 转接头 Adaptor 套筒接杆 Socket Extension 万向转接头 Universal Joint 螺刀Screwdrivers 快速螺刀 Fast Screwdrivers 仪表螺刀 Electronic miniature Screwdrivers 十字头螺刀 PILLIPS Screwdrivers 磁性螺刀 Magnetic Screwdrivers 一字头螺刀 Flat Tip Screwdrivers 摇把 Speeders 钳Pliers 尖嘴钳 Needle Nose Pliers 大力钳 Locking Pliers 保险丝钳 Safety Wire Twisters 鹰嘴钳 Adjustable Joint Pliers 插头钳 Connector Plug 剥线钳 Wire Strippers 鱼口钳 Combination Slip-Joint Pliers 卡环钳 Convertible Snap Ring Pliers 剪线钳 Diagonal Cutters 压线钳 Wire Crimpers 电气工具Electronic Tools 矿灯Safety Lamb (Miner’s Lamb) 手电 Flashing Light 对讲机 Interphone 电烙铁 Electronic Iron 耳机 Earphone 防静电手腕 Static Wrist 电池 Battery 充电器 Charger
Ceramics and Glasses 陶瓷和玻璃 A ceramic is often broadly defined as any inorganic nonmetallic material. By this definition, ceramic materials would also include glasses; however, many materials scientists add the stipulation that “ceramic” must also be crystalline. 陶瓷通常被概括地定义为无机的非金属材料。照此定义,陶瓷材料也应包括玻璃;然而许多材料科学家添加了“陶瓷”必须同时是晶体物组成的约定。 A glass is an inorganic nonmetallic material that does not have a crystalline structure. Such materials are said to be amorphous. 玻璃是没有晶体状结构的无机非金属材料。这种材料被称为非结晶质材料。Properties of Ceramics and Glasses Some of the useful properties of ceramics and glasses include high melting temperature, low density, high strength, stiffness, hardness, wear resistance, and corrosion resistance. 陶瓷和玻璃的特性 高熔点、低密度、高强度、高刚度、高硬度、高耐磨性和抗腐蚀性是陶瓷和玻璃的一些有用特性。 Many ceramics are good electrical and thermal insulators. Some ceramics have special properties: some ceramics are magnetic materials; some are piezoelectric materials; and a few special ceramics are superconductors at very low temperatures. Ceramics and glasses have one major drawback: they are brittle. 许多陶瓷都是电和热的良绝缘体。某些陶瓷还具有一些特殊性能:有些是磁性材料,有些是压电材料,还有些特殊陶瓷在极低温度下是超导体。陶瓷和玻璃都有一个主要的缺点:它们容易破碎。 Ceramics are not typically formed from the melt. This is because most ceramics will crack extensively (i.e. form a powder) upon cooling from the liquid state. 陶瓷一般不是由熔化形成的。因为大多数陶瓷在从液态冷却时将会完全破碎(即形成粉末)。 Hence, all the simple and efficient manufacturing techniques used for glass production such as casting and blowing, which involve the molten state, cannot be used for the production of crystalline ceramics. Instead, “sintering” or “firing” is the process typically used. 因此,所有用于玻璃生产的简单有效的—诸如浇铸和吹制这些涉及熔化的技术都不能用于由晶体物组成的陶瓷的生产。作为替代,一般采用“烧结”或“焙烧”工艺。 In sintering, ceramic powders are processed into compacted shapes and then heated to temperatures just below the melting point. At such temperatures, the powders react internally to remove porosity and fully dense articles can be obtained. 在烧结过程中,陶瓷粉末先挤压成型然后加热到略低于熔点温度。在这样的温度下,粉末内部起反应去除孔隙并得到十分致密的物品。 An optical fiber contains three layers: a core made of highly pure glass with a high refractive index for the light to travel, a middle layer of glass with a lower refractive index known as the cladding which protects the core glass from scratches and other surface imperfections, and an out polymer jacket to protect the fiber from
一、烘燥和加湿预处理机械: 烘燥和加湿预处理机械Dry and wet pre-treatment machinery 1.1.炭化机Carbonisingmachines 1.2.烧毛机Singeringmachines 1.3.织物清洗机、打浆和除杂机Fabric cleaning machines, Beating and Dustremoval machines 1.4.煮呢机、煮布锅、沸煮设备Crabbing machines, Kiers, Boiling apparatus 1.5.退浆机Desizingmachines 1.6.分批漂白机Bleaching apparatus and machines, Batch 1.7.连续漂白机Bleaching plant, Continuous 1.8.纱线洗涤机Yarn washing machines 1.9.绳状洗涤机Rope washing machine 1.10.平幅洗涤机Open-width washing machines 1.11.溶剂洗涤机Solvent washing machines 1.1 2.缩呢机、缩绒机Milling/fulling machines 1.13.纱线丝光机Mercerizing machines for yarns 1.14.机织和针织织物丝光机Mercerizing machines for woven and knitted fabrics 二、染色机和染色设备: 染色机和染色设备Dyeing machines and apparatus 2.1.连续式丝束及毛条染色生产线Continuous dyeing lines for tows and tops 2.2.连续式纱线染色生产线Continuous dyeing lines for yarn 2.3.经纱连续染色生产线Continuous dyeing lines for warp 2.4.窄幅织物连续染色机Continuous dyeing lines for narrow fabrics 2.5.地毯织物连续染色机Continuousdyeing lines for carpets 2.6.其他织物连续染色机Continuous dyeing lines for other fabrics 2.7.地毯织物匹染机Piecedyeing machines for carpets 2.8.高温筒子纱线染色机HT dyeing apparatus for cones 2.9.高温经轴染色设备HT dyeing apparatus for beams 2.10.常压纱线染色设备Yarn dyeing apparatus, atmospheric pressure 2.11.轧染机Padding mangles 2.12.绞纱染色机Cabinet hank dyeing machines 2.1 3.常压织物染色装置Fabric dyeing apparatus, atmospheric pressure 2.14.喷射染色机Jet dyeing machines 2.15.高温溢流染色机HT overflow dyeing machines 2.16.常压溢流染色机Overflow dyeing machines, atmosphericpressure
常用原材料英文缩写与中文名称对照表A 英文缩写全称 A/MMA 丙烯腈/甲基丙烯酸甲酯共聚物 AA 丙烯酸 AAS 丙烯酸酯-丙烯酸酯-苯乙烯共聚物 ABFN 偶氮(二)甲酰胺 ABN 偶氮(二)异丁腈 ABPS 壬基苯氧基丙烷磺酸钠 B 英文缩写全称 BAA 正丁醛苯胺缩合物 BAC 碱式氯化铝 BACN 新型阻燃剂 BAD 双水杨酸双酚A酯 BAL 2,3-巯(基)丙醇 BBP 邻苯二甲酸丁苄酯 BBS N-叔丁基-乙-苯并噻唑次磺酰胺 BC 叶酸 BCD β-环糊精 BCG 苯顺二醇 BCNU 氯化亚硝脲 BD 丁二烯 BE 丙烯酸乳胶外墙涂料 BEE 苯偶姻乙醚 BFRM 硼纤维增强塑料 BG 丁二醇 BGE 反应性稀释剂 BHA 特丁基-4羟基茴香醚 BHT 二丁基羟基甲苯 BL 丁内酯 BLE 丙酮-二苯胺高温缩合物 BLP 粉末涂料流平剂 BMA 甲基丙烯酸丁酯 BMC 团状模塑料 BMU 氨基树脂皮革鞣剂
BN 氮化硼 BNE 新型环氧树脂 BNS β-萘磺酸甲醛低缩合物 BOA 己二酸辛苄酯 BOP 邻苯二甲酰丁辛酯 BOPP 双轴向聚丙烯 BP 苯甲醇 BPA 双酚A BPBG 邻苯二甲酸丁(乙醇酸乙酯)酯 BPF 双酚F BPMC 2-仲丁基苯基-N-甲基氨基酸酯 BPO 过氧化苯甲酰 BPP 过氧化特戊酸特丁酯 BPPD 过氧化二碳酸二苯氧化酯 BPS 4,4’-硫代双(6-特丁基-3-甲基苯酚) BPTP 聚对苯二甲酸丁二醇酯 BR 丁二烯橡胶 BRN 青红光硫化黑 BROC 二溴(代)甲酚环氧丙基醚 BS 丁二烯-苯乙烯共聚物 BS-1S 新型密封胶 BSH 苯磺酰肼 BSU N,N’-双(三甲基硅烷)脲 BT 聚丁烯-1热塑性塑料 BTA 苯并三唑 BTX 苯-甲苯-二甲苯混合物 BX 渗透剂 BXA 己二酸二丁基二甘酯 BZ 二正丁基二硫代氨基甲酸锌 C 英文缩写全称 CA 醋酸纤维素 CAB 醋酸-丁酸纤维素 CAN 醋酸-硝酸纤维素 CAP 醋酸-丙酸纤维素 CBA 化学发泡剂
. 机械专业英语词汇 陶瓷ceramics 合成纤维synthetic fibre 电化学腐蚀electrochemical corrosion 车架automotive chassis 悬架suspension 转向器redirector 变速器speed changer 板料冲压sheet metal parts 孔加工spot facing machining 车间workshop 工程技术人员engineer 气动夹紧pneuma lock 数学模型mathematical model 画法几何descriptive geometry 机械制图Mechanical drawing 投影projection 视图view 剖视图pro 标准件standard component 零件图part drawing 装配图assembly drawing 尺寸标注size marking 技术要求technical requirements 刚度rigidity 内力internal force 位移displacement 截面section 疲劳极限fatigue limit 断裂fracture 塑性变形plastic distortion 脆性材料brittleness material 刚度准则rigidity criterion 垫圈washer 垫片spacer 直齿圆柱齿轮straight toothed spur gear 斜齿圆柱齿轮helical-spur gear 直齿锥齿轮straight bevel gear 运动简图kinematic sketch 齿轮齿条pinion and rack 蜗杆蜗轮worm and worm gear 虚约束passive constraint 曲柄crank 摇杆racker 凸轮cams 共轭曲线conjugate curve 范成法generation method 定义域definitional domain 值域range 导数\\微分differential coefficient 求导derivation 定积分definite integral 不定积分indefinite integral 曲率curvature 偏微分partial differential 毛坯rough 游标卡尺slide caliper 千分尺micrometer calipers 攻丝tap 二阶行列式second order determinant 逆矩阵inverse matrix 线性方程组linear equations 概率probability 随机变量random variable 排列组合permutation and combination 气体状态方程equation of state of gas 动能kinetic energy 势能potential energy 机械能守恒conservation of mechanical energy 动量momentum 桁架truss 轴线axes 余子式cofactor 逻辑电路logic circuit 触发器flip-flop 脉冲波形pulse shape 数模digital analogy 液压传动机构fluid drive mechanism 机械零件mechanical parts 淬火冷却quench 淬火hardening 回火tempering 调质hardening and tempering 磨粒abrasive grain 结合剂bonding agent 砂轮grinding wheel 后角clearance angle 龙门刨削planing 主轴spindle
纺织机械专业术语大全及中英文对照,很有用! 导读 本文由钱苹生先生整理编辑,再次表示感谢!如需转载,请注明作者及来源,谢谢! 一、纺纱类机械: 1. 棉纺前纺机械Preparatory machinery for cotton spinningsystems 2. 轧花机Gins 3. 打包机 Baling presses4. 拆包机及抓包机Bale breakers, bale pluckers5. 清花间用机械Blow room machinery6. 混棉箱Blending hoppers7. 梳棉机自动喂棉机Automatic feeding devices for cardingmachines8. 梳棉机Carding machines9. 并条机Drawing frames10. 条卷机Sliver lap machines11. 精梳机Combing machines12. 粗纱机Speed frames13. 包纱机Covering machines14. 精梳毛纺、半精梳毛纺、毛纺前纺机械Preparatory machinery for worsted,semi-worsted or woolen spinning systems15. 羊毛开包机Wool bale brokers16. 洗毛生产机Wool washing lines17. 开松除杂机、和毛机、弹毛机willowingmachinery and teasers, garnet machines18. 废毛利用生产机Waste reclamation19. 梳毛机Carding machines20. 自动
MENU 冷菜Cold Dish 白切鸡Boiled Chicken with Sauce 川北凉粉Clear Noodles in Chili Sauce 夫妻肺片Pork Lungs in Chili Sauce 酱香猪蹄Pig Feet Seasoned with Soy Sauce 老醋泡花生Peanuts Pickled in Aged Vinegar 泡椒凤爪Chicken Feet with Pickled Peppers 五香牛肉Spicy Roast Beef 盐焗鸡Baked Chicken in Salt 炸花生米Fried Peanuts 酱猪肘Pork Hock Seasoned with Soy Sauce 凉拌黄瓜Cucumber in Sauce 糖拌西红柿Tomato Slices with Sugar 糖蒜Sweet Garlic 热菜Hot Dishes 东坡方肉Braised Dongpo Pork 鱼香肉丝Yu-Shiang Shredded Pork 糖醋排骨Sweet and Sour Spare Ribs 毛家红烧肉Braised Pork,Mao’s Family Style 红烧狮子头Stewed Pork Ball in Brown Sauce 回锅肉片Sautéed Sliced Pork with Pepper and Chili 京酱肉丝Sautéed Shredded Pork in Sweet Bean Sauce 酸豆角肉沫Sautéed Sour Beans with Minced Pork 杭椒牛柳Sautéed Beef Filet with Hot Green Pepper 青椒肉丝Sautéed Shredded Pork with Green Pepper 水煮牛肉Poached Sliced Beef in Hot Chili Oil 葱爆羊肉Sautéed Lamb Slices with Scallion 红焖羊排Braised Lamb Chops with Carrots 烤羊腿Roast Lamb Leg 手扒羊排Grilled Lamb Chops 烤羔羊Roasted Lamb
英语原文 NUMERICAL CONTROL Numerical control(N/C)is a form of programmable automation in which the processing equipment is controlled by means of numbers, letters, and other symbols, The numbers, letters, and symbols are coded in an appropriate format to define a program of instructions for a particular work part or job. When the job changes, the program of instructions is changed. The capability to change the program is what makes N/C suitable for low-and medium-volume production. It is much easier to write programs than to make major alterations of the processing equipment. There are two basic types of numerically controlled machine tools:point—to—point and continuous—path(also called contouring).Point—to—point machines use unsynchronized motors, with the result that the position of the machining head Can be assured only upon completion of a movement, or while only one motor is running. Machines of this type are principally used for straight—line cuts or for drilling or boring. The N/C system consists of the following components:data input, the tape reader with the control unit, feedback devices, and the metal—cutting machine tool or other type of N/C equipment. Data input, also called “man—to—control link”,may be provided to the machine tool manually, or entirely by automatic means. Manual methods when used as the sole source of input data are restricted to a relatively small number of inputs. Examples of manually operated devices are keyboard dials, pushbuttons, switches, or thumbwheel selectors. These are located on a console near the machine. Dials ale analog devices usually connected to a syn-chro-type resolver or potentiometer. In most cases, pushbuttons, switches, and other similar types of selectors are digital input devices. Manual input requires that the operator set the controls for each operation. It is a slow and tedious process and is seldom justified except in elementary machining applications or in special cases. In practically all cases, information is automatically supplied to the control unit and the machine tool by cards, punched tapes, or by magnetic tape. Eight—channel punched paper tape is the most commonly used form of data input for conventional N/C systems. The coded instructions on the tape consist of sections of punched holes called blocks. Each block represents a machine function, a machining operation, or a combination of the two. The entire N/C program on a tape is made up of an accumulation of these successive data blocks. Programs resulting in long tapes all wound on reels like motion-picture film. Programs on relatively short tapes may be continuously repeated by joining the two ends of the tape to form a loop. Once installed, the tape is used again and again without further handling. In this case, the operator simply loads and