金属材料及热处理工艺常用基础英语词汇翻译对照
金属材料及热处理工艺常用基础英语词汇翻译对照
X线结晶分析法 X – ray crystal analyics method
奥氏体 Austenite
奥氏体碳钢 Austenite Carbon Steel
奥氏铁孻回火 Austempering
半静钢 Semi-killed steel
包晶反应 Peritectic Reaction
包晶合金 Peritectic Alloy
包晶温度 Peritectic Temperature
薄卷片及薄片（0.3至2.9mm厚之片）机械性能 Mechanical Properties of Thin Stainless Steel（Thickness from 0.3mm to 2.9mm）– strip/sheet 杯突测试（厚度： 0.4公厘至1.6公厘，准确至0.1公厘 3个试片平均数）Erichsen test （Thickness： 0.4mm to 1.6mm， figure round up to 0.1mm）贝氏体钢片 Bainite Steel Strip
比电阻 Specific resistivity & specific resistance
比较抗磁体、顺磁体及铁磁体 Comparison of Diamagnetism， Paramagnetic & Ferromagnetism
比热 Specific Heat
比重 Specific gravity & specific density
边缘处理 Edge Finish
扁线、半圆线及异形线 Flat Wire， Half Round Wire， Shaped Wire and Precision Shaped Fine Wire
扁线公差 Flat Wire Tolerance
变态点 Transformation Point
表面保护胶纸 Surface protection film
表面处理 Surface finish
表面处理 Surface Treatment
不破坏检验 Non – destructive inspections
不锈钢 Stainless Steel
不锈钢–种类，工业标准，化学成份，特点及主要用途 Stainless Steel – Type， Industrial Standard， Chemical Composition， Characteristic & end usage of the most commonly used Stainless Steel
不锈钢薄片用途例 End Usage of Thinner Gauge
不锈钢扁线及半圆线常用材料 Commonly used materials for Stainless Flat Wire & Half Round Wire
不锈钢箔、卷片、片及板之厚度分类 Classification of Foil， Strip，Sheet & Plate by Thickness
不锈钢材及耐热钢材标准对照表 Stainless and Heat-Resisting Steels 不锈钢的磁性 Magnetic Property & Stainless Steel
不锈钢的定义 Definition of Stainless Steel
不锈钢基层金属 Stainless Steel as Base Metal
不锈钢片、板用途例 Examples of End Usages of Strip， Sheet & Plate 不锈钢片材常用代号 Designation of SUS Steel Special Use Stainless
不锈钢片机械性能（301， 304， 631， CSP） Mechanical Properties of Spring use Stainless Steel
不锈钢应力退火卷片常用规格名词图解 General Specification of Tension Annealed Stainless Steel Strips
不锈钢之分类，耐腐蚀性及耐热性 Classification， Corrosion Resistant & Heat Resistance of Stainless Steel
材料的加工性能 Drawing abillity
插入型固熔体 Interstital solid solution
常用尺寸 Commonly Used Size
常用的弹簧不锈钢线-编号，特性，表面处理及化学成份 StainlessSpring Wire – National Standard number， Charateristic， Surface finish & Chemical composition
常用的镀锌钢片（电解片）的基层金属、用途、日工标准、美材标准及一般厚度 Base metal， application， JIS & ASTM standard， and Normal thickness of galvanized steel sheet
长度公差 Length Tolerance
超耐热钢 Special Heat Resistance Steel
超声波探伤法 Ultrasonic inspection
冲击测试 Impact Test
冲剪 Drawing & stamping
初释纯铁体 Pro-entectoid ferrite
处理及表面状况 Finish & Surface
纯铁体 Ferrite
磁场 Magnetic Field
磁畴 Magnetic domain
磁粉探伤法 Magnetic particle inspection
磁化率 Magnetic Susceptibility （Xm）
磁矩 magnetic moment
磁力 Magnetic
磁力 Magnetic Force
磁偶极子 Dipole
磁性 Magnetisum
磁性变态 Magnetic Transformation
磁性变态点 Magnetic Transformation
磁性感应 Magnetic Induction
粗珠光体 Coarse pearlite
淬火 Quenching
淬火及回火状态 Hardened & Tempered Strip/ Precision – Quenched Steel Strip
淬火剂 Quenching Media
单相金属 Single Phase Metal
单相轧压镀锡薄铁片（白铁皮/马口铁） Single-Reduced Tinplate
弹簧不锈钢线，线径及拉力列表 Stainless Spring Steel， Wire diameter and Tensile strength of Spring Wire
弹簧用碳钢片 CarbonSteel Strip For Spring Use
弹簧用碳钢片材之边缘处理 Edge Finished
弹性限度、阳氏弹性系数及屈服点 elastic limit， Yeung's module of elasticity to yield point
倒后擦发条 Pull Back Power Spring
导热度 Heat conductivity
低碳钢或铁基层金属 Iron & Low Carbon as Base Metal
低碳马氏体不锈钢 Low Carbon Martensite Stainless Steel
低温脆性 Cold brittleness
低温退火 Low Temperature Annealing
第二潜变期 Secondary Creep
第三潜变期 Tertiary Creep
第壹潜变期 Primary Creep
点焊 Spot welding
电镀金属钢片 Plate Metal Strip
电镀金属捆片的优点 Advantage of Using Plate Metal Strip
电镀锌（电解）钢片 Electro-galvanized Steel Sheet
电镀锌钢片的焊接 Welding of Electro-galvanized steel sheet
电镀锌钢片或电解钢片 Electro-galvanized Steel Sheet/Electrolytic Zinc Coated Steel Sheet
电解/电镀锌大大增强钢片的防锈能力 Galvanic Action improving Weather & Corrosion Resistance of the Base Steel Sheet
电解冷轧钢片厚度公差 Thickness Tolerance of Electrolytic
Cold-rolled sheet
电炉 Electric furnace
电器及家电外壳用镀层冷辘 [低碳] 钢片 Coated （Low Carbon） Steel Sheets for Casing，Electricals & Home Appliances
电器用的硅 [硅] 钢片之分类 Classification of Silicon Steel Sheet for Electrical Use
电器用钢片的绝缘涂层 Performance of Surface Insulation of Electrical Steel Sheets
电器用钢片用家需自行应力退火原因 Annealing of the Electrical Steel Sheet
电器用硅 [硅] 钢片 Electrical Steel Sheet
电阻焊 Resistance Welding
定型发条 Constant Torque Spring
定型发条的形状及翻动过程 Shape and Spring Back of Constant Torque Spring
定型发条及上炼发条的驱动力 Spring Force of Constant Torque Spring and Wing-up Spring
定型发条驱动力公式及代号 The Formula and Symbol of Constant Torque Spring
镀层质量标记 Markings & Designations of Differential Coatings
镀铬 Chrome Plated
镀黄铜 Brass Plated
镀铝（硅）钢片–美材试标准（ASTM A-463-77）35.7 JIS G3314镀热浸铝片的机械性能 Mechanical Properties of JIS G 3314 Hot-Dip
Aluminum-coated Sheets and Coils
镀铝（硅）钢片–日工标准（JIS G3314） Hot-aluminum-coated sheets and coils to JIS G 3314
镀铝（硅）钢片及其它种类钢片的抗腐蚀性能比较 Comparsion of various resistance of aluminized steel & other kinds of steel
镀铝（硅）钢片生产流程 Aluminum Steel Sheet， Production Flow Chart 镀铝硅钢片 Aluminized Silicon Alloy Steel Sheet
镀铝硅合金钢片的特色 Feature of Aluminized Silicon Alloy Steel Sheet 镀镍 Nickel Plated
镀锡薄钢片（白铁皮/马日铁）制造过程 Production Process of Electrolytic Tinplate
镀锡薄铁片（白铁皮/马口铁）（日工标准 JIS G3303）
镀锡薄铁片的构造 Construction of Electrolytic Tinplate
锻造 Fogging
断面缩率 Reduction of area
发条的分类及材料 Power Spring Strip Classification and Materials 发条片 Power Spring Strip
反铁磁体 Antiferromagnetism
方线公差 Square Wire Tolerance
防止生锈 Rust Protection
放射线探伤法 Radiographic inspection
非晶粒取向电力用钢片的电力、磁力、机械性能及夹层系数 Lamination Factors of Electrical， Magnetic & Mechanical Non-Grain Oriented Electrical
沸腾钢（未净钢） Rimmed steel
分类 Classification
负磁力效应 Negative effect
钢板 Steel Plate
钢板订货需知 Ordering of Steel Plate
钢板生产流程 Production Flow Chart
钢板用途分类及各国钢板的工业标准包括日工标准及美材试标准 Type of steel Plate & Related JIS， ASTM and Other Major Industrial Standards 钢材的熔铸、锻造、挤压及延轧 The Casting， Fogging， Extrusion，Rolling & Steel
钢的脆性 Brittleness of Steel
钢的种类 Type of Steel
钢铁的名称 Name of steel
钢铁的制造 Manufacturing of Steel
钢铁的主要成份 The major element of steel
钢铁生产流程 Steel Production Flow Chart
钢铁用“碳”之含量来分类 Classification of Steel according to Carbon contents
高锰钢铸–日工标准 High manganese steel to JIS standard
高碳钢化学成份及用途 High Carbon Tool Steel， Chemical Composition and Usage
高碳钢片 High Carbon Steel Strip
高碳钢片用途 End Usage of High Carbon Steel Strip
高碳钢线枝 High Carbon Steel Wire Rod （to JIS G3506）
高温回火 High Temperature Tempering
格子常数 Lattice constant
铬钢–日工标准 JIS G4104 Chrome steel to JIS G4104
铬镍不锈钢及抗热钢弹簧线材–美国材验学会 ASTM A313 – 1987 Chromium – Nickel Stainless and Heat-resisting Steel Spring Wire –ASTM A313 – 1987
铬系耐热钢 Chrome Heat Resistance Steel
铬钼钢钢材–日工标准 G4105 62 Chrome Molybdenum steel to JIS G4105 各种不锈钢线在不同处理拉力比较表 Tensile Strength of various kinds of Stainless Steel Wire under Different Finish
工业标准及规格–铁及非铁金属 Industrial Standard – Ferrous & Non – ferrous Metal
公差 Size Tolerance
共晶 Eutectic
共释变态 Eutectoid Transformation
固熔体 Solid solution
光辉退火 Bright Annealing
光线（低碳钢线），火线（退火低碳钢线），铅水线（镀锌低碳钢线）及制造钉用低碳钢线之代号、公差及备注 Ordinary Low Carbon Steel Wire，Annealed Low Carbon Steel Wire， Galvanized low Carbon Steel Wire & Low Carbon Steel Wire for nail manufacturing - classification， Symbol of Grade， Tolerance and Remarks.
硅含量对电器用的低碳钢片的最大好处 The Advantage of Using Silicon low Carbon Steel
滚焊 Seam welding
过共晶体 Hyper-ectectic Alloy
过共释钢 Hype-eutectoid
含硫易车钢 Sulphuric Free Cutting Steel
含铅易车钢 Leaded Free Cutting Steel
含铁体不锈钢 Ferrite Stainless Steel
焊接 Welding
焊接合金 Soldering and Brazing Alloy
焊接能力 Weldability 镀铝钢片的焊接状态（比较冷辘钢片） Tips on welding of Aluminized sheet in comparasion with cold rolled steel strip 合金平衡状态 Thermal Equilibrium
厚度及阔度公差 Tolerance on Thickness & Width
滑动面 Slip Plan
化学成份 Chemical Composition
化学结合 Chemical bond
化学性能 Chemical Properties
化学元素 Chemical element
黄铜基层金属 Brass as Base Metal
回复柔软 Crystal Recovery
回火脆性 Temper brittleness
回火有低温回火及高温回火 Low & High Temperature Tempering
回火状态 Annealed Strip
基层金属 Base Metal of Plated Metal Strip
机械性能 Mechanical Properites
机械性能 Mechanical properties
畸变 Distortion
级别、电镀方法、镀层质量及常用称号 Grade， Plating type， Designation of Coating Mass & Common Coating Mass
级别，代号，扭曲特性及可用之线材直径 Classes， symbols， twisting characteristic and applied Wire Diameters
级别，代号及化学成份 Classification， Symbol of Grade and Chemical Composition
挤压 Extrusion
加工方法 Manufacturing Method
加工性能 Machinability
简介 General
交换能量 Positive energy exchange
矫顽磁力 Coercive Force
金属变态 Transformation
金属材料的试验方法 The Method of Metal inspection
金属材料的性能及试验 Properties & testing of metal
金属的特性 Features of Metal
金属的相融、相融温度、晶体反应及合金在共晶合金、固熔孻共晶合金及偏晶反应的比较 Equilibrium Comparision
金属间化物 Intermetallic compound
金属结晶格子 Metal space lattice
金属捆片电镀层 Plated Layer of Plated Metal Strip
金属塑性 Plastic Deformation
金属特性 Special metallic features
金属与合金 Metal and Alloy
金相及相律 Metal Phase and Phase Rule
晶粒取向（Grain-Oriented）及非晶粒取向（Non-Oriented）
晶粒取向，定取向芯钢片及高硼定取向芯钢片之磁力性能及夹层系数（日工标准及美材标准） Magnetic Properties and Lamination Factor of
SI-ORIENT-CORE& SI-ORIENT-CORE-HI B Electrical Steel Strip （JIS and AISI Standard）
晶粒取向电器用硅 [硅] 钢；片–高硼低硫（LS）定取向钢片之磁力及电力性能 Magnetic and Electrical Properties of SI-ORIENT-CORE-HI-B-LS 晶粒取向电器用硅 [硅] 钢片–高硼（HI-B）定取向芯钢片及定取向芯钢片之机械性能及夹层系数 Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B and SI-ORIENT-CORE Grain Orient Electrical Steel Sheets
晶粒取向电器用硅 [硅] 钢片–高硼低硫（LS）定取向钢片之机械性能及夹层系数 Mechanical Properties and Lamination Factors of
SI-ORIENT-CORE-HI-B-LS
晶粒取向电器用硅（硅）钢片–高硼（HI-B）定取向芯钢片，定取向芯钢片及高硼低硫（LS）定取向芯钢片之标准尺寸及包装 Standard Forms and Size of SI-ORIENT-CORE-HI-B，SI-CORE， & SI-ORIENT-CORE-HI-B-LS Grain- 晶粒取向电器用硅（硅）钢片-高硼（HI-B）定取向芯钢片，定取向芯钢片及高硼低硫（LS）定取向芯钢片之厚度及阔度公差 Physical Tolerance of
SI-ORIENT-CORE-HI-B， SI-ORIENT-CORE， & SI-CORE-HI-B-LS Grain 晶粒取向电器用硅钢片 Grain-Oriented Electrical Steel
晶粒取向电器用硅钢片主要工业标准 International Standard –
Grain-Oriented Electrical Steel Silicon Steel Sheet for Electrical Use 晶体结构 Crystal Pattern
晶体结构，定向格子及单位晶格 Crystal structure， Space lattice & Unit cell
净磁矩 Net magnetic moment
绝缘表面 Surface Insulation
均热炉 Soaking pit
抗磁体 Diamagnetism
抗腐蚀及耐用 Corrosion & resistance durability
抗化学品能力 Chemical Resistance
抗敏感及环境保护 Allergic， re-cycling & environmental protection 抗热超级合金 Heat Resistance Super Alloy
扩散退火 Diffusion Annealing
拉尺发条 Measure Tape
拉伸测试（顺纹测试） Elongation test
冷冲及冷锻用碳钢线枝 Carbon Steel Wire Rods for Cold Heading & Cold Forging （to JIS G3507）
冷拉钢板重量表 Cold Drawn Steel Bar Weight Table
冷拉钢枝材 Cold Drawn Carbon Steel Shafting Bar
冷拉高碳钢线 Hard Drawn High Carbon Steel Wire
冷轧钢片 Cold-Rolled Steel Sheet/Strip
冷轧高碳钢–日本工业标准 Cold-Rolled （Special Steel） Carbon Steel Strip to JIS G3311
冷轧或热轧钢片阔度公差 Width Tolerance of Cold or Hot-rolled sheet 冷轧状态 Cold Rolled Strip
冷辘（低碳）钢片的分类用、途、工业标准、品质、加热状态及硬度表 End usages， industrial standard， quality， condition and hardness of cold rolled steel strip
冷辘低碳钢片（双单光片）（日工标准 JIS G3141） 73 - 95 Cold Rolled （Low carbon） Steel Strip （to JIS G 3141）
冷辘钢捆片及张片的电镀和印刷方法 Cold rolled steel coil & sheet electro-plating & painting method
冷辘钢捆片及张片制作流程图表 Production flow chart cold rolled steel coil sheet
冷辘钢片（拉力： 30-32公斤/平方米）在没有表面处理状态下的焊接状况Spot welding conditions for bared （free from paint， oxides etc） Cold rolled mild steel sheets（T/S：30-32 Kgf/ μ m2）
冷辘钢片储存与处理提示 General advice on handling & storage of cold rolled steel coil & sheet
冷辘钢片的“理论重量”计算方程式 Cold Rolled Steel Sheet –Theoretical mass
冷辘钢片订货需知 Ordering of cold rolled steel strip/sheet
理论质量 Theoretical Mass
连续铸造法 Continuous casting process
两面不均等锡层 Both Side Different Thickness Coated Mass
两面均等锡层 Both Side Equally Coated Mass
裂纹之容许深度及脱碳层 Permissible depth of flaw and decarburized layer
临界温度 Critical temperture
马氏体不锈钢 Martensite Stainless Steel
马氏铁体淬火 Marquenching
埋弧焊 Submerged-arc Welding
每公斤发条的长度简易公式 The Length of 1 Kg of Spring Steel Strip 美材试标准的冷辘低碳钢片 Cold Rolled Steel Strip American Standard – American Society for testing and materials （ASTM）
美国工业标准–不锈钢及防热钢材的化学成份（先数字后字母排列）AISI – Chemical Composition of Stainless Steel & Heat-Resistant Steel （in order of number & alphabet）
米勒指数 Mill's Index
魔术手环 Magic Tape
魔术手环尺寸图Drawing of Magic Tap
耐热不锈钢 Heat-Resistance Stainless Steel
耐热不锈钢比重表 Specific Gravity of Heat – resistance steel plates and sheets stainless steel
镍铬–日工标准 G4102 63 Chrome Nickel steel to JIS G4102
镍铬耐热钢 Ni - Cr Heat Resistance Steel
镍铬系不锈钢 Nickel Chrome Stainless Steel
镍铬系耐热不锈钢特性、化学成份、及操作温度 Heat-Resistance Stainless Steel
镍铬钼钢–日工标准 G4103 64 Nickel， Chrome & Molybdenum Steel to JIS G4103
疲劳测试 Fatigue Test
片及板材 Chapter Four-Strip， Steel & Plate
平坦度（阔度大于500公厘，标准回火） Flatness （width>500mm， temper：standard）
破坏的检验 Destructive Inspection
其它焊接材料请参阅日工标准目录 Other Soldering Material
其它日工标准冷轧钢片（用途及编号） JIS standard & application of other cold Rolled Special Steel
气焊 Gas Welding
潜变测试 Creep Test
潜变强度 Creeps Strength
强度 Strength
琴线（日本标准 G3522） Piano Wires （ to G3522）
球化退火 Spheroidizing Annealing
曲面（假曲率） Camber
屈服强度（降伏强度）（Yield strangth）
全静钢 Killed steel
热力应先从工件边缘透入 Heat from the Laminated Stacks Edges
热膨胀系数 Coefficient of thermal expansion
热轧钢片 Hot-Rolled Sheet/Strip
热轧钢片厚度公差 Thickness Tolerance of Hot-rolled sheet
日本工业标准–不锈钢的化学成份（先数字后字母排列） JIS – Chemical Composition of Stainless Steel （in order of number & alphabet）日工标准（JIS G3141）冷辘钢片化学成份 Chemical composition – cold rolled steel sheet to JIS G3141
日工标准（JIS G3141）冷辘钢片重量列表 Mass of Cold-Rolled Steel Sheet to JIS G3141
日工标准JIS G3141冷辘低碳钢片（双单光片）的编号浅释 Decoding of cold rolled（Low carbon）steel strip JIS G3141
日工标准下的特殊钢材 Specail Steel according to JIS Standard
熔铸 Casting
软磁 Soft Magnetic
软磁材料 Soft Magnetic Material
软焊 Soldering Alloy
软焊合金–日本标准 JIS H 4341 Soldering Alloy to JIS H 4341
上链发条 Wind-up Spring
上漆能力 Paint Adhesion
伸长度 Elongation
渗碳体 Cementitle
渗透探伤法 Penetrate inspection
生产流程 Production Flow Chart
生锈速度表 Speed of rusting
时间淬火 Time Quenching
时间效应（老化）及拉伸应变 Aging & Stretcher Strains
释出硬化不锈钢 Precipitation Hardening Stainless Steel
双相辗压镀锡薄钢片（马口铁/白铁皮） Dual-Reduction Tinplate
顺磁体 Paramagnetic
碳钢回火 Tempering
碳污染 Prevent Carbon Contamination
特点 Characteristic
特殊钢 Special Steel
特殊钢以用途来分类 Classification of Special Steel according to End Usage
特殊钢以原素分类 Classification of Special Steel according to Element
提防过份氧化 No Excessive Oxidation
铁磁体 Ferromagnetism
铁铬系不锈钢片 Chrome Stainless Steel
铁及非铁金属 Ferrous & Non Ferrous Metal
铁锰铝不锈钢 Fe / Mn / Al / Stainless Steel
铁线（低碳钢线）日工标准 JIS G 3532 Low Carbon Steel Wires （ Iron Wire ） to JIS G 3532
铁相 Steel Phases
同素变态 Allotropic Transformation
铜基层金属 Copper as Base Metal
透磁度 Magnetic Permeability
退火 Annealing
退火时注意事项 Annealing Precautionary
外价电子 Outer valence electrons
弯度 Camber
完全退火 Full Annealing
物理性能 Physical Properties
物料科学 Material Science
物料科学定义 Material Science Definition
锡层质量 Mass of Tin Coating （JIS G3303-1987）
锡基、铅基及锌基轴承合金比较表 Comparison of Tin base， Lead base and Zinc base alloy for Bearing purpose
细线材、枝材、棒材 Chapter Five Wire， Rod & Bar
显微观察法 Microscopic inspection
线材/枝材材质分类及制成品 Classification and End Products of
Wire/Rod
线径、公差及机械性能（日本工业标准 G 3521） Mechanical Properties （JIS G 3521）
相反旋转 Opposite span
相律 Phase Rule
工艺常用英语词汇
3．工艺常用英语词汇 探伤仪flaw detector 探伤flaw detection/crack detection 不合格 not up to the (required) standard/below the mark 合格qualified/up to standard 合格证 certificate of inspection/certificate of quality 一级片class Ⅰ typ e film 二级片class Ⅱ type film 三级片class Ⅲ type film 试压流体test fluid 试验证书test certificate 试压工作队testing spread 硬度试验test of hardness testing 试压准备test preparation 试验压力test pressure 试压泵 test pump 试焊口test weld 强度试压strength test 严密性试压proof test 通径试验drift test 吹扫purging 压力表manometer/pressure gauge
压力表式温度计pressure-spring thermometer 压力开关pressure switch 压力阀pressure valve 精度系数quality coefficient 精度等级accuracy class/precision class 精度检查accuracy checking/alignment test 精度控制accuracy control 精度要求required precision 稳压试验standup pressure test 对管工stabber 施工工作队spread 盲板blank 临时盲板temporary blank 临时措施temporary 水压试验test of water pressure 返工remade 返修rework 截面section 管沟pipe trench 管沟截面尺寸section dimension of pipe trench 管沟开挖质量quality of pipe trench 开挖机械excavation machinery
机械工程英语_第二部分翻译
Unit5 INDUSTRIAL ROBOT工业机器人 INTRODUCTION介绍 Industrial robots are relatively new electromechanical devices that are beginning to change the appearance of modern industry. Industrial robots are not like the science fiction devices that possess human-like abilities and provide companionship with space traveler、Research to enable robots to “see，"hear"，“touch"，and "listen" has been underway for two decades and is beginning to bear fruit. However，the current technology of industrial robots is such that most robots contain Only an arm rather than all the anatomy a human possesses. Current control only allows these devices to move from point to point in space，performing relatively simple taskes. The Robotics Institute of America defines a robot as“a reprogramrnable multifunction manipulator designed to move material，parts, tools，or other specialized devices through variable programmed motions for the performance of a variety of tasks. "' A NC machining center would qualify as a robot if one were to interpret different types of machining as different functions- Most manufacturing engineers do not consider a NC machining center a robot，even though these machines hive a number of situ- ilarities. The power drive and controllers of both NC machines and robots can be quite similar. Robots, like NC machines can he powered by electrical motors，hydraulic systems，or pnetinlat tc svsterns. Control for either device can lye either open-loop or closed-loop. In fact，many of the developments used in robotics have evolved from the NC industry，and many of the manufactur- ers of robots also manufacture NC machines or NC controllers.工业机器人是相对来说较新的机电设备， 它已经开始改变现代工业的面貌。工业机器人不像科幻小说中的那个模样具有人一样的能力并且能与
材料专业英语常见词汇
材料专业英语常见词汇（一） Structure ['str?kt??]组织 Ceramic [si'r?mik]陶瓷 Ductility [d?k'til?ti] 塑性 Stiffness ['stifnis]刚度 Grain [ɡrein]晶粒 Phase [feiz]相 Unit cell 单胞 Bravais lattice 布拉菲['l?tis]布拉菲点阵 Stack [st?k]堆垛 Crystal ['krist?l] 晶体 Metallic crystal structure [mi't?lik, me-]金属性晶体点阵Non-directional [,n?ndi'rek??n?l, -dai-]无方向性 Face-centered cubic ['kju:bik]面心立方 Body-centered cubic 体心立方Hexagonal close-packed [hek's?ɡ?n?l]['kl?us'p?kt]密排六方Copper ['k?p?] 铜 Aluminum [?'lju:min?m]铝 Chromium ['kr?umj?m]铬 Tungsten ['t??st?n]钨 Crystallographic Plane [,krist?l?u'ɡr?fik][plein]晶面Crystallographic direction 晶向 Property ['pr?p?ti] 性质 Miller indices ['indisi:z]米勒指数 Lattice parameters ['l?tis][p?'r?mit?]点阵参数 Tetragonal [te'tr?ɡ?n?l]四方的 Hexagonal [hek's?ɡ?n?l]六方的 Orthorhombic [,?:θ?'r?mbik]正交的Rhombohedra [,r?mb?u'hi:dr?] 菱方的 Monoclinic [,m?n?u'klinik]单斜的 Prism ['prizm]棱镜 Cadmium ['k?dmi?m]镉 Coordinate system [k?u'?:dinit, k?u'?:dineit]坐标系Point defect ['di:fekt, di'f-, di'fekt]点缺陷Lattice ['l?tis]点阵 Vacancy ['veik?nsi]空位 Solidification [,s?lidifi'kei??n]结晶 Interstitial [,int?'sti??l]间隙 Substitution [,s?bsti'tju:??n]置换 Solid solution strengthening [s?'lju:??n]['stre?θ?n, 'stre?kθ?n] 固溶强化
回流焊工艺常用中英文术语
回流焊工艺常用中英文术语 1. Solder Paste Technology（焊膏工艺） Solder Powder ( 锡粉) 休息再来接着说。 Solder Paste Rheology（锡膏流变学） Solder Paste Composition & Manufacturing（锡膏成分和制造） 2. Fundamentals of Solders and Soldering（焊料及焊接基础知识） Soldering Theory（焊接理论） Microstructure and Soldering（显微结构及焊接） Effect of Elemental Constituents on Wetting（焊料成分对润湿的影响） Effect of Impurities on Soldering（杂质对焊接的影响） 3. SMT Problems Occurred Prior to Reflow（回流前SMT问题） Flux Separation（助焊剂分离) Paste Hardening（焊膏硬化） Poor Stencil Life（网板寿命问题) Poor Print Thickness（印刷厚度不理想） Poor Paste Release From Squeegee（锡膏脱离刮刀问题） Smear（印锡模糊） Insufficiency（印锡不足） Needle Clogging（针孔堵塞） Slump（塌落） Low Tack（低粘性） Short Tack Time （粘性时间短） 4. SMT Problems Occurred During Reflow（回流过程中的SMT问题） Cold Joints（冷焊） Nonwetting（不润湿） Dewetting（反润湿） Leaching（浸析） Interllics（金属互化物） Tombstoning（立碑） Skewing（歪斜） Wicking（焊料上吸） Bridging（桥连） Voiding（空洞） Opening（开路） Solder Balling(锡球) Solder Beading（锡珠） Spattering（飞溅）
中英文文献翻译-国内高空作业机械行业现状及发展方向
附录 Present situation of access working vehicles industry and its development stratagem in China Our work in the machinery production in the late 1970s, rapid development, started the current production management enterprise with several rapidly increased to over 40, and foreign joint ventures or cooperative enterprises have five production. According to 2004 and 2005《the Chinese mechanical engineering yearbook》，2003 annual aloft working machinery industrial output for 32139 million yuan, the production of various kinds of aerial work platform 1906, aerial work platform car 7.4, In 2004, aloft working machinery industrial output for 36340 million yuan, the production of various kinds of aerial work platform 2500, car 800 sets. In recent years, through several backbone enterprise industry technical transformation, the production scale expands unceasingly, formed the respective characteristics of the products can meet the domestic market # aerial work machinery need, its main economic index of enterprise economic benefits are rising gradually, increasing. 1 Aloft working machinery industry development present situation 1.1 To improve product performance Our aloft working machinery industry backbone enterprises of some use their equipment and technology advantages, through the study, the introduction and digest its own technology and equipment, through the study, introduce advanced foreign technology and developed many new products, the products of the technical level and product quality is improving, and close to the international similar product level # promoted aloft working machinery industry in the domestic market and technological progress in competitive and market demand, the yield increased rapidly. If Beijing hoisting machine factory developed self-traveling shear fork platform, the spider type folding boom platform, aluminum mast section of the box. One box type aluminum mast section of the largest single mast operation platform will reach the height of 16.5 m, Hangzhou and engineering machine's more mast 22m reached alloy platform, hangzhou aichi engineering vehicles Co., LTD develop full hydraulic driving type self-traveling aerial work platform, the maximum height of 26.7 m homework. The above products fill the blank, domestic products have reached the international advanced level. In addition, in the car factory products, fushun crane, jinzhou heavy machinery Co., LTD, xuzhou construction machinery group and chongqing dajiang industrial (group) Co., LTD has developed over 30 aloft work, broken fire only depending on the imported products of domestic situation of the weak. 1.2 Product category and quantity increasing Our work with the mechanical product demand of national economy and the development of urban construction increased year by year, all kinds of new products increased rapidly in recent years. If Beijing hoisting machine factory in just a few short
常用专业英语词汇集锦.
六. Abbreviation
168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 R/D R/I RCCP REV RMA RMA ROP RPN RTV S/N S/O SAI SCM SFC SIP SIS SMD SMT SOP SOR SPC SPEC SQM SWOT TE TOC TPI TPM TQA TQC TQM VQA VQM W/H W/O WHS WIP Research and Development Run-In Rough Cut Capacity Planning Revision Returned Merchandise Access Return Merchandise Approval(or Authorization Re-Order Point Risk Priority Number Return To Vendor Serial Number Sales Order Social Accountability International Supply Chain Management Shop Floor Control Standard Inspection Procedule Strategic Information System Surface Mounting Device Surface Mounting Technology Standard Operation Procedure Special Order Request Statistical Process Control Specification Supplier Quality Management Strengths、Weaknesses、Opportunities、 Threates test engineering Theory of Constraints Total Productive Innovation Total Production Management Total Quality Assurance Total Quality Control Total Quality Management Vender Quality Approval Vendor Quality Management Warehouse Work Order warehouse Work In Process 研發部常溫熱機(老
半导体常用英语词汇
MFG 常用英文单字 Semiconductor半导体 导体、绝缘体和半导体主要依据导电系数的大小，决定了电子的移动速度。 导体：金、银、铜、铁、人、水……导电系数大，传导容易 绝缘体：塑料、木头、皮革、纸……导电系数小、传导不容易 半导体：硅中加锗、砷、镓、磷……平时不导电加特定电压后导电 Wafer 芯片或晶圆：原意为法国的松饼，饼干上有格子状的饰纹，与FAB内生产的芯片图形类似。 Lot 批；一批芯片中最多可以有25片，最少可以只有一片。 Wafer ID 每一片芯片有自己的芯片刻号，叫Wafer ID。 Lot ID 每一批芯片有自己的批号，叫Lot ID。 Part ID 各个独立的批号可以共享一个型号，叫Part ID。 WIP Work In Process，在制品。从芯片投入到芯片产品，FAB内各站积存了相当数量的芯片，统称为FAB内的WIP 。 一整个制程又可细分为数百个Stage和Step，每一个Stage所堆积的芯片， 称为Stage WIP。 Lot Priority 每一批产品在加工的过程中在WIP中被选择进机台的优先级。 Super Hot Run的优先级为1，视为等级最高，必要时，当Lot在 上一站加工时，本站便要空着机台等待Super Hot Run。 Hot Run的优先级为2，紧急程度比Super Hot Run次一级。 Normal的优先级为3，视为正常的等级，按正常的派货原则，或 视常班向生产指令而定。 Cycle time 生产周期，FAB Cycle Time 定义为：从芯片投入到芯片产生的这一段时间。 Stage Cycle Time：Lot从进站等候开始到当站加工后出货时间点截止。 Spec. 规格Specification的缩写。产品在机台加工过程中，每一站均设定规格。 机台加工后，产品或控片经由量测机台量测，该产品加工后，是否在规格 内。若超出规格﹝Out of SPEC﹞，必须通知组长将产品Hold，并同时通知 制程工程师前来处理，必要时机台要停工，重新monitor，确定量测规格， 藉以提升制程能力。 SPC Statistics Process Control统计制程管制；透过统计的手法，搜集分析资料，
工艺单常用单词
服装工艺常用英语词汇 服装英语词汇A ADD PINCES 冒顶加褶 ARMHOLE 挂肩/袖笼 ARMHOLE HARF CIRCUMFERENCE 挂肩弯量 APPLIQUé嵌花贴花缝花 ALL OVER PRINT/AOP满印 APPLICATION贴补 ACID WASH酸洗 APPLICATION PIQUET网眼贴布 ASSORTMENT搭配 ARTICLE CODE款号 ARTICLE DESCRIPTION 款式描述 AS PER NEW SIZE CHARTS 见尺码单 ANTI-THEFT SYSTEM防盗标 abrasion resistance 耐磨性 accessory 辅料 acetate 醋酸 acid dyes 酸性染料 across back(4”BLW CB) 后沃（后中下4”度）across front(5”BLW HPS) 前沃（肩高点下5”）across measure 横量 acrylic 腈纶 adhesive / fusible interlining 粘衬 after finish / after treatment 后整理 air-jet texturing yarn 空气变形丝 angora cashmere over coating 兔羊绒大衣呢anti-fungus 防霉 anti-pilling 抗起球 antique brass coating 镀青古铜 anti-static 抗静电 antistatic finish 防静电处理 apparel 成衣 appealing look 吸引人的外表 appearance retention 外观持久性 armhole 夹圈 assembling of front & back part 前后幅合并assembling section 合并部分 attach collar 上领 attach label 上商标 attachment （车缝）附件 AZO free / NO AZO 环保染色 AZO free dyes 非偶氮染料 服装英语词汇B BACK HANGTAG BARCODE STICHERS 吊牌贴BARCODE STICKER条码贴 BEAD珠 BIB围嘴BINDING 包边 BLU STUDS 蓝色烫石 BOW 蝴蝶结 BOTTOM LEG CIRCUMFERENCE 裤口弯量 BEIGE米色 BABY OVERLOCK小锁线 BINDING拉边 BOTTOM PART BEGIN UNDER THE STITCHING拼接/ CUT AND SEWN拼接/ SLEEVE BEGIN UNDER THE STITCHING 拼接袖 BOTTON INTO EMBROIDERY 绣花中的扣子 BULK FABRIC大货布 BUCKLE LOOP扣环，钮圈 BICEPT袖肥 BUST胸围 BOTTOM LEG SLIT HEIGHT BORDER EXCL. 裤腿开口高不含拉边 back across 后背宽 back cover front 后搭前 backless dress 露背装 back mid-armhole 后背宽 back neck drop 后领深 back neck width 后领阔 back rise(below W/B) 后浪腰下起度 back stitch 返针，回针 bar coded sticker 条形码贴纸 bartack 套结,打枣（牛仔上用，用于加固）bartacker 打枣车，套结缝纫机 basic dyes 碱性染料 baste 假缝 basting 挑缝 batik 蜡染 bearer 袋衬 bearer & facing 袋衬袋贴 bedford cord 坑纹布，经条灯心绒 beige 米色 bell bottom 喇叭裤脚 bellows pocket 风琴袋 belt 腰带 belt-loop 裤耳 bias cut 斜纹裁，纵纹裁 bifurcate 分叉 big twill polyester peach 宽斜纹桃皮绒 binder 包边蝴蝶，滚边蝴蝶 binding 包边 binding of SLV. opening R折 binding/bound 滚条
(机械制造行业)机械英文翻译
英文翻译 机械设计 一台完整机器的设计是一个复杂的过程。机械设计是一项创造性的工作。设计工程师不仅在工作上要有创造性，还必须在机械制图、运动学、工程材料、材料力学和机械制造工艺学等方面具有深厚的基础知识。 Machine Design The complete design of a machine is a complex process. The machine design is a creative work. Project engineer not only must have the creativity in the work, but also must in aspect and so on mechanical drawing, kinematics, engineerig material, materials mechanics and machine manufacture technology has the deep elementary knowledge. 任何产品在设计时第一步就是选择产品每个部分的构成材料。许多的材料被今天的设计师所使用。对产品的功能，它的外观、材料的成本、制造的成本作出必要的选择是十分重要的。对材料的特性必须事先作出仔细的评估。 One of the first steps in the design of any product is to select the material from which each part is to be made. Numerous materials are available to today's designers. The function of the product, its appearance, the cost of the material, and the cost of fabrication are important in making a selection. A careful evaluation of the properties of a. material must be made prior to any calculations. 仔细精确的计算是必要的，以确保设计的有效性。在任何失败的情况下，最好知道在最初设计中有有缺陷的部件。计算（图纸尺寸）检查是非常重要的。一个小数点的位置放错，就可以导致一个本可以完成的项目失败。设计工作的各个方面都应该检查和复查。 Careful calculations are necessary to ensure the validity of a design. In case of any part failures, it is desirable to know what was done in originally designing the defective components. The checking of calculations (and drawing dimensions) is of utmost importance. The misplacement of one decimal point can ruin an otherwise acceptable project. All aspects of design work should be checked and rechecked. 计算机是一种工具，它能够帮助机械设计师减轻繁琐的计算，并对现有数据提供进一步的分析。互动系统基于计算机的能力，已经使计算机辅助设计（CAD）和计算机辅助制造（CAM）成为了可能。心理学家经常谈论如何使人们适应他们所操作的机器。设计人员的基本职责是努力使机器来适应人们。这并不是一项容易的工作，因为实际上并不存在着一个对所有人来说都是最优的操作范围和操作
[电气工程]常用专业英语词汇
电气工程常用专业英语词汇表 电气工程常用专业英语词汇表 电路基础 ideal voltage (current) source 理想电压(流)源volt-ampere characteristic 伏安特性potential difference 电位差 reference potential 参考电位resistance 电阻capacitance 电容 inductance 电感 reactance 电抗 inductive(capacitive) reactance 感(容)抗impedance 阻抗 equivalent circuit 等效电路 Ohm’s law 欧姆定律Kirchhoff’s law 基尔霍夫定律Kirchhoff’s voltage law（KVL）基尔霍夫电压定律Kirchhoff’s current law（KCL）基尔霍夫电流定律Thevenin’s theorem 戴维宁定理Norton’s theorem 诺顿定理 branch 支路 node 结点 loop 回路 mesh 网孔 open circuit 开路（断路） short circuit 短路 branch current analysis 支路电流法mesh current analysis 网孔电流法 ode voltage analysis 结点电位法n superposition theorem 叠加原理passive(active) two-terminal network 无(有)源二端网络root mean square (RMS) 均方根值 effective value 有效值instantaneous value 瞬时值 ampere 安培 volt 伏特 Hertz 赫兹 reactive power` 无功功率 active power 有功功率 transfer function 传递函数 apparent power 视在功率 power-factor compensation 功率因数补偿series (parallel) resonance 串(并)联谐振 amplitude(phase)-frequency response characteristic 幅(相)频特性 figure of merit 品质因素 pass-band 通频带bandwidth (BW) 带宽 first(second)-order filter 一(二)阶滤波器low(high)-pass filter 低(高)通滤波器band-pass(stop) filter 带通(阻)滤波器transfer function 转移函数 Bode diagram 波特图 Fourier series 傅立叶级数 three-phase circuit 三相电路 cutoff frequency 截止频率 FFT (Fast Fourier Transform) 快速傅立叶变换 state variable 状态变量 电机 generation 发电 transmission 输电 distribution 配电 coil 线圈 core 铁心 winding 绕组 electrical machine 电机 generator 发电机 motor 电动机 stator (rotor) 定子(转子) armature 电枢 brush 电刷 commutator 换向器 salient-pole 凸极 slip ring 滑环 induction motor 感应电动机 magnetic flux 磁通 asynchronous machine 异步电机 synchronous generator 同步发电机 eddy current 涡流 EMF（electromotive force）电动势 counter EMF 反电势 torque 转矩 excitation 励磁 prime mover 原动机 rectifier 整流器 leakage flux 漏磁通 demagnetization 退磁，去磁 short-circuit ratio 短路比 converter (inverter) 换流器（逆变器） synchronous condenser 同步调相机 magnetization curve 磁化曲线 separately exciting 他励 compounded excited 复励 self-exciting 自励 series(shunt)-wound 串(并)励
常用化工机械专业英语对照
常用机械专业英语对照 Cutting: 切割 socket weld承插焊接 fillet weld角焊,填角焊 branch connection分支接续 fabrication tolerance.制造容差 local heat treatment 局部热处理 threaded pipe螺纹管 seal welding.密封焊接 flange joint 凸缘接头 undercut 底切 feeder馈电线 conduit outlet电线引出口 seal fitting 密封接头, 密封配件 Screw thread lubricant螺纹润滑剂 Seal: 绝缘层 weld reinforcement 焊缝补强 lock washer 锁紧[止动, 防松]垫圈electrical panel.配电板,配电盘 nipple螺纹接头 zinc plated.镀锌的 ring joint 环接, 围缘接合 bolt 螺栓 control: 控制器 National Electrical Code 全国电气规程master schedule 主要图表, 综合图表, 设计任务书, 主要作业表 torque wrench 转矩扳手 job site 施工现场 flange connection.凸缘联接 Hard hat：安全帽 Goggles：护目镜 stockpile贮存 packing list装箱单 crate: 柳条箱 purchased material list原材料进货单 back-feed反馈 wire coil线盘，线卷， NPT thread. 美国标准锥管螺纹 cable gland 电缆衬垫 terminal block线弧, 接头排接线盒, 接线板, 线夹 power drill机械钻 connector. 接线器 insulated sleeve绝缘套管 wire connector接线器 wire terminal电线接头 control wiring控制线路motor lead电动机引出线 power wiring电力布线 tender document．提供证件 orifice plate.挡板 nut 螺母 flange gasket 法兰垫片 dimensional inspection 尺寸检验 burn through 烧蚀 piping system.管道系统 reinforcement of weld加强焊缝fabrication.制造 dye penetrant examination染料渗透试验法magnetic particle examination 磁粉检验girth weld环形焊缝 cement lined piping 水泥衬里 weld joint 焊缝, 焊接接头 spool drawing 管路图, 管路详图 spot test 抽查, 当场测试 butt weld 对接焊缝 Random Radiography随机射线照相检查radiographic examination 射线照相检查assembly.装配 erection 架设 examination试验 cable tray.电缆盘 rigid steel conduit 钢制电线管 power control 功率控制 arc welding 电弧焊 control cable控制电缆操纵索 normal bend 法向[法线]弯管 cable glands: 电缆衬垫 exfoliation剥落 power receptacle 电力插座 grounding conductor 接地导体 lighting fixture照明器材 junction box 分线箱 race way 电缆管道 terminal box接线盒 distribution board配电盘, 配电屏receptacle 插座 tumble switch.翻转开关,拨动式开关cathodic protection system 阴极保护系统Circuit breaker断路开关 amplifier panel 放大器盘 control console 控制台 electrical material电气材料convenience receptacle.电源插座 cable gland 电缆衬垫
纺织品印花常见术语的英文翻译
纺织品印花常见术语的英文翻译 蒸化(aging) 自动筛网印花(automatic screen printing) 满地印花(blotch print) 烂花印花(burn—out prints) 涪烘(curing) 直接印花(direct prints) 拔染印花(discharge prints) 干法印花(dry prints) 双面印花(duplex prints) 静电荷(electrostatic charge) 静电植绒(electrostatic flocking) 按特殊要求印花(engineered print) 叠印(fall on) 平板(flatbed) 植绒印花(flock printing) 植绒(flocking) 半色调或中间色调(halftone) 手工筛网印花(hand screen printing) 热转移印花(heat--transfer printing) 喷射印花(jet printing) 机械植绒(mechanical flocking) 罩印(over print) 印花色浆(print paste) 大木印花胶浆(DM print binder) 对花(registration) 防染印花(resist printing) 滚筒印花(roller printing) 圆形筛网印花或圆网印花(rotary screen printing) 筛网印花(screen printing) 打样(strike off) 热转移印花(thermal transfer printing) 经纱印花(warp prints) 湿罩干印花(wet—On—dry) 湿罩湿印花(wet—On—wet) 湿法印花(wet prints) 印花对花准确／对花不准(print register／off register) water based printing 水印 heat transfer printing 热转移印花
气象常用专业英语词汇
主题词表 English Chinese 01. 大气 atmospheric science 大气科学 meteorology 气象学 atmosphere 大气 atmospheric impurity 大气杂质 atmospheric suspended matter 大气悬浮物 atmospheric composition 大气成分 atmospheric mass 大气质量 atmospheric density 大气密度 atmospheric subdivision 大气分层 homosphere 均质层 heterosphere 非均质层 standard [pressure] level 标准层 isothermal layer 等温层 lower atmosphere 低层大气 middle atmosphere 中层大气 upper atmosphere 高层大气 troposphere 对流层 tropopause 对流层顶 stratosphere 平流层 stratopause 平流层顶 mesosphere 中间层 mesopause 中间层顶 thermosphere 热层 exosphere 外[逸]层 ionosphere 电离层 magnetosphere 磁层 ozonosphere 臭氧层 free atmosphere 自由大气 planetary atmosphere 行星大气 standard atmosphere(reference atmosphere) 标准大气（参考大气） homogeneous atmosphere 均质大气 isothermal atmosphere 等温大气 polytropic atmosphere 多元大气 scale height 大气标高 meteorological element 气象要素 air temperature 气温 wet-bulb temperature 湿球温度 dry-bulb temperature 干球温度 atmospheric pressure 气压 standard atmosphere pressure 标准大气压 station pressure 本站气压 sea-level pressure 海平面气压 pressure gradient 气压梯度 barometric height formula 压高公式pressure gradient force 气压梯度力Coriolis force 科里奥利力 water vapor 水[蒸]汽 water vapor pressure 水汽压 humidity 湿度 relative humidity 相对湿度 absolute humidity 绝对湿度 specific humidity 比湿 mixing ratio 混合比 dew point [temperature] 露点(温度) depression of the dew point （温度）露点差super-saturated air 过饱和空气 saturation specific humidity 饱和比湿saturation vapor pressure 饱和水汽压saturation deficit 饱和差 cloud 云 low cloud 低云 middle cloud 中云 high cloud 高云 cloud amount 云量 cloud height 云高 cloud genera 云属 cloud etage 云族 cloud species 云种 cloud variety 云类 cloud form 云状 cirrus, Ci 卷云 cirrostratus, Cs 卷层云 cirrocumulus, Cc 卷积云 altocumulus, Ac 高积云 altostratus, As 高层云 cumulus, Cu 积云 cumulus humilis, Cu hum 淡积云 cumulus congestus, Cu con 浓积云cumulonimbus, Cb 积雨云 cumulus fractus, Cu fra 碎积云stratocumulus, Sc 层积云 stratus, St 层云 nimbostratus, Ns 雨层云 stratiform cloud 层状云 cumuliform cloud 积状云 cold cloud 冷云 warm cloud 暖云 ice cloud 冰云 wind 风 wind direction 风向 wind speed, wind velocity 风速 maximum wind speed 最大风速