如何破解EXCEL工作表保护密码(2种方法)_

如何破解EXCEL中的密码（在此提供2种方法）

方法一

在日常工作中，您是否遇到过这样的情况：您用Excel编制的报表、

表格、程序等，在单元格中设置了公式、函数等，为了防止其他人修改您的设置或者防止您自己无意中修改，您可能会使用Excel的工作表保护功能，但时间久了保护密码容易忘记，这该怎么办？有时您从网上下载的Excel格式的小程序，您想修改，但是作者加了工作表保护密码，怎么办？您只要按照以下步骤操作，Excel工作表保护密码瞬间即破！

1、打开您需要破解保护密码的Excel文件；

2、依次点击菜单栏上的工具---宏----录制新宏，输入宏名字

如:aa；

3、停止录制(这样得到一个空宏)；

4、依次点击菜单栏上的工具---宏----宏,选aa,点编辑按钮；

5、删除窗口中的所有字符(只有几个),替换为下面的内容；

Option Explicit

Public Sub AllInternalPasswords()

' Breaks worksheet and workbook structure passwords. Bob McCormick

' probably originator of base code algorithm modified for coverage ' of workbook structure / windows passwords and for multiple passwords

'

' Norman Harker and JE McGimpsey 27-Dec-2002 (Version 1.1)

' Modified 2003-Apr-04 by JEM: All msgs to constants, and

' eliminate one Exit Sub (Version 1.1.1)

' Reveals hashed passwords NOT original passwords

Const DBLSPACE As String = vbNewLine & vbNewLine

Const AUTHORS As String = DBLSPACE & vbNewLine & _

"Adapted from Bob McCormick base code by" & _

"Norman Harker and JE McGimpsey"

Const HEADER As String = "AllInternalPasswords User Message" Const VERSION As String = DBLSPACE & "Version 1.1.1 2003-Apr-04" Const REPBACK As String = DBLSPACE & "Please report failure " & _

"to the microsoft.public.excel.programming newsgroup."

Const ALLCLEAR As String = DBLSPACE & "The workbook should " & _

"now be free of all password protection, so make sure you:" & _ DBLSPACE & "SAVE IT NOW!" & DBLSPACE & "and also" & _ DBLSPACE & "BACKUP!, BACKUP!!, BACKUP!!!" & _

DBLSPACE & "Also, remember that the password was " & _

"put there for a reason. Don't stuff up crucial formulas " & _ "or data." & DBLSPACE & "Access and use of some data " & _ "may be an offense. If in doubt, don't."

Const MSGNOPWORDS1 As String = "There were no passwords on " & _

"sheets, or workbook structure or windows." & AUTHORS & VERSION Const MSGNOPWORDS2 As String = "There was no protection to " & _

"workbook structure or windows." & DBLSPACE & _

"Proceeding to unprotect sheets." & AUTHORS & VERSION

Const MSGTAKETIME As String = "After pressing OK button this " & _

"will take some time." & DBLSPACE & "Amount of time " & _ "depends on how many different passwords, the " & _ "passwords, and your computer's specification." & DBLSPACE & _ "Just be patient! Make me a coffee!" & AUTHORS & VERSION Const MSGPWORDFOUND1 As String = "You had a Worksheet " & _ "Structure or Windows Password set." & DBLSPACE & _

"The password found was: " & DBLSPACE & "$$" & DBLSPACE & _ "Note it down for potential future use in other workbooks by " & _

"the same person who set this password." & DBLSPACE & _

"Now to check and clear other passwords." & AUTHORS & VERSION Const MSGPWORDFOUND2 As String = "You had a Worksheet " & _ "password set." & DBLSPACE & "The password found was: " & _

DBLSPACE & "$$" & DBLSPACE & "Note it down for potential " & _ "future use in other workbooks by same person who " & _

"set this password." & DBLSPACE & "Now to check and clear " & _ "other passwords." & AUTHORS & VERSION

Const MSGONLYONE As String = "Only structure / windows " & _ "protected with the password that was just found." & _ ALLCLEAR & AUTHORS & VERSION & REPBACK

Dim w1 As Worksheet, w2 As Worksheet

Dim i As Integer, j As Integer, k As Integer, l As Integer Dim m As Integer, n As Integer, i1 As Integer, i2 As Integer Dim i3 As Integer, i4 As Integer, i5 As Integer, i6 As Integer Dim PWord1 As String

Dim ShTag As Boolean, WinTag As Boolean

Application.ScreenUpdating = False

With ActiveWorkbook

WinTag = .ProtectStructure Or .ProtectWindows

End With

ShTag = False

For Each w1 In Worksheets

ShTag = ShTag Or w1.ProtectContents

Next w1

If Not ShTag And Not WinTag Then

MsgBox MSGNOPWORDS1, vbInformation, HEADER

Exit Sub

End If

MsgBox MSGTAKETIME, vbInformation, HEADER

If Not WinTag Then

MsgBox MSGNOPWORDS2, vbInformation, HEADER

Else

On Error Resume Next

Do 'dummy do loop

For i = 65 To 66: For j = 65 To 66: For k = 65 To 66 For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66 For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66 For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126 With ActiveWorkbook

.Unprotect Chr(i) & Chr(j) & Chr(k) & _

Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & _

Chr(i3) & Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)

If .ProtectStructure = False And _

.ProtectWindows = False Then

PWord1 = Chr(i) & Chr(j) & Chr(k) & Chr(l) & _

Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _

Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)

MsgBox Application.Substitute(MSGPWORDFOUND1, _ "$$", PWord1), vbInformation, HEADER

Exit Do 'Bypass all for...nexts

End If

End With

Next: Next: Next: Next: Next: Next

Next: Next: Next: Next: Next: Next

Loop Until True

On Error GoTo 0

End If

If WinTag And Not ShTag Then

MsgBox MSGONLYONE, vbInformation, HEADER

Exit Sub

End If

On Error Resume Next

For Each w1 In Worksheets

'Attempt clearance with PWord1

w1.Unprotect PWord1

Next w1

On Error GoTo 0

ShTag = False

For Each w1 In Worksheets

'Checks for all clear ShTag triggered to 1 if not. ShTag = ShTag Or w1.ProtectContents

Next w1

If ShTag Then

For Each w1 In Worksheets

With w1

If .ProtectContents Then

On Error Resume Next

Do 'Dummy do loop

For i = 65 To 66: For j = 65 To 66: For k = 65 To 66 For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66 For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66 For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126 .Unprotect Chr(i) & Chr(j) & Chr(k) & _

Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _

Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)

If Not .ProtectContents Then

PWord1 = Chr(i) & Chr(j) & Chr(k) & Chr(l) & _

Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _

Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)

MsgBox Application.Substitute(MSGPWORDFOUND2, _ "$$", PWord1), vbInformation, HEADER

'leverage finding Pword by trying on other sheets

For Each w2 In Worksheets

w2.Unprotect PWord1

Next w2

Exit Do 'Bypass all for...nexts

End If

Next: Next: Next: Next: Next: Next

Next: Next: Next: Next: Next: Next

Loop Until True

On Error GoTo 0

End If

End With

Next w1

End If

MsgBox ALLCLEAR & AUTHORS & VERSION & REPBACK, vbInformation, HEADER

End Sub

6、关闭编辑窗口；

7、依次点击菜单栏上的工具---宏-----宏,选AllInternalPasswords,运行,确定两次；

等一会,再点击确定。哈哈哈,没有密码了吧!!

方法二

1新建宏工具-宏-录制新宏随便输入个名字如hong 点击“确定”按钮

2点击“停止录制”按钮或从菜单“停止录制”宏

3点击工具-宏-宏选择刚才所建的宏然后点击“编辑”按钮

4经过以上会弹出代码编写窗口

5填写代码将下面的代码全部复制必替换原来的字符，填写完毕后关闭该窗口

Public Sub 工作表保护密码破解()

Const DBLSPACE As String = vbNewLine & vbNewLine

Const AUTHORS As String = DBLSPACE & vbNewLine & _

"作者:圣天"

Const HEADER As String = "工作表保护密码破解"

Const VERSION As String = DBLSPACE & "版本 Version 1.1.1"

Const REPBACK As String = DBLSPACE & ""

Const ZHENGLI As String = DBLSPACE & " XXXXXXX" Const ALLCLEAR As String = DBLSPACE & "该工作簿中的工作表密码保护已全部解除!!" & DBLSPACE & "请记得另保存" _

& DBLSPACE & "注意：不要用在不当地方，要尊重他人的劳动成果！"

Const MSGNOPWORDS1 As String = "该文件工作表中没有加密"

Const MSGNOPWORDS2 As String = "该文件工作表中没有加密2"

Const MSGTAKETIME As String = "解密需花费一定时间,请耐心等候!" & DBLSPACE & "按确定开始破解!"

Const MSGPWORDFOUND1 As String = "密码重新组合为:" & DBLSPACE & "$$" & DBLSPACE & _

"如果该文件工作表有不同密码,将搜索下一组密码并修改清除"

Const MSGPWORDFOUND2 As String = "密码重新组合为:" & DBLSPACE & "$$" & DBLSPACE & _

"如果该文件工作表有不同密码,将搜索下一组密码并解除"

Const MSGONLYONE As String = "确保为唯一的?"

Dim w1 As Worksheet, w2 As Worksheet

Dim i As Integer, j As Integer, k As Integer, l As Integer

Dim m As Integer, n As Integer, i1 As Integer, i2 As Integer

Dim i3 As Integer, i4 As Integer, i5 As Integer, i6 As Integer

Dim PWord1 As String

Dim ShTag As Boolean, WinTag As Boolean

Application.ScreenUpdating = False

With ActiveWorkbook

WinTag = .ProtectStructure Or .ProtectWindows

End With

ShTag = False

For Each w1 In Worksheets

ShTag = ShTag Or w1.ProtectContents

Next w1

If Not ShTag And Not WinTag Then

MsgBox MSGNOPWORDS1, vbInformation, HEADER

Exit Sub

End If

MsgBox MSGTAKETIME, vbInformation, HEADER

If Not WinTag Then

Else

On Error Resume Next

Do 'dummy do loop

For i = 65 To 66: For j = 65 To 66: For k = 65 To 66

For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66 For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66 For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126 With ActiveWorkbook

.Unprotect Chr(i) & Chr(j) & Chr(k) & _

Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & _

Chr(i3) & Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)

If .ProtectStructure = False And _

.ProtectWindows = False Then

PWord1 = Chr(i) & Chr(j) & Chr(k) & Chr(l) & _

Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _

Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)

MsgBox Application.Substitute(MSGPWORDFOUND1, _ "$$", PWord1), vbInformation, HEADER

Exit Do 'Bypass all for...nexts

End If

End With

Next: Next: Next: Next: Next: Next

Next: Next: Next: Next: Next: Next

Loop Until True

On Error GoTo 0

End If

If WinTag And Not ShTag Then

MsgBox MSGONLYONE, vbInformation, HEADER

Exit Sub

End If

On Error Resume Next

For Each w1 In Worksheets

'Attempt clearance with PWord1

w1.Unprotect PWord1

Next w1

On Error GoTo 0

ShTag = False

For Each w1 In Worksheets

'Checks for all clear ShTag triggered to 1 if not. ShTag = ShTag Or w1.ProtectContents

Next w1

If ShTag Then

For Each w1 In Worksheets

With w1

If .ProtectContents Then

On Error Resume Next

Do 'Dummy do loop

For i = 65 To 66: For j = 65 To 66: For k = 65 To 66

For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66

For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66

For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126

.Unprotect Chr(i) & Chr(j) & Chr(k) & _

Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _

Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)

If Not .ProtectContents Then

PWord1 = Chr(i) & Chr(j) & Chr(k) & Chr(l) & _

Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _

Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)

MsgBox Application.Substitute(MSGPWORDFOUND2, _

"$$", PWord1), vbInformation, HEADER

'leverage finding Pword by trying on other sheets

For Each w2 In Worksheets

w2.Unprotect PWord1

Next w2

Exit Do 'Bypass all for...nexts

End If

Next: Next: Next: Next: Next: Next

Next: Next: Next: Next: Next: Next

Loop Until True

On Error GoTo 0

End If

End With

Next w1

End If

MsgBox ALLCLEAR & AUTHORS & VERSION & REPBACK & ZHENGLI, vbInformation, HEADER

End Sub

6最后就来执行刚才所建的宏工具-宏-宏点击执行等带小段时间之后就可以看到效果了

强力破解EXCEL工作表保护密码

强力破解EXCEL工作表保护 在日常工作中，您是否遇到过这样的情况：您用Excel编制的报表、表格、程序等，在单元格中设置了公式、函数等，为了防止其他人修改您的设置或者防止您自己无意中修改，您可能会使用Excel的工作表保护功能，但时间久了保护密码容易忘记，这该怎么办？有时您从网上下载的Excel格式的小程序，您想修改，但是作者加了工作表保护密码，怎么办？您只要按照以下步骤操作，Excel工作表保护密码瞬间即破！ 1、打开您需要破解保护密码的Excel文件； 2、依次点击菜单栏上的工具---宏----录制新宏，输入宏名字 如:aa； 3、停止录制(这样得到一个空宏)； 4、依次点击菜单栏上的工具---宏----宏,选aa,点编辑按钮； 5、删除窗口中的所有字符(只有几个),替换为下面的内容； Option Explicit Public Sub AllInternalPasswords() ' Breaks worksheet and workbook structure passwords. Bob McCormick ' probably originator of base code algorithm modified for coverage ' of workbook structure / windows passwords and for multiple passwords ' ' Norman Harker and JE McGimpsey 27-Dec-2002 (Version 1.1)

' Modified 2003-Apr-04 by JEM: All msgs to constants, and ' eliminate one Exit Sub (Version 1.1.1) ' Reveals hashed passwords NOT original passwords Const DBLSPACE As String = vbNewLine & vbNewLine Const AUTHORS As String = DBLSPACE & vbNewLine & _ "Adapted from Bob McCormick base code by" & _ "Norman Harker and JE McGimpsey" Const HEADER As String = "AllInternalPasswords User Message" Const VERSION As String = DBLSPACE & "Version 1.1.1 2003-Apr-04" Const REPBACK As String = DBLSPACE & "Please report failure " & _ "to the microsoft.public.excel.programming newsgroup." Const ALLCLEAR As String = DBLSPACE & "The workbook should " & _ "now be free of all password protection, so make sure you:" & _ DBLSPACE & "SAVE IT NOW!" & DBLSPACE & "and also" & _ DBLSPACE & "BACKUP!, BACKUP!!, BACKUP!!!" & _ DBLSPACE & "Also, remember that the password was " & _ "put there for a reason. Don't stuff up crucial formulas " & _ "or data." & DBLSPACE & "Access and use of some data " & _ "may be an offense. If in doubt, don't." Const MSGNOPWORDS1 As String = "There were no passwords on " &

破解excel保护密码的宏代码

Option Explicit Public Sub AllInternalPasswords() ' Breaks worksheet and workbook structure passwords. Bob McCormick ' probably originator of base code algorithm modified for coverage ' of workbook structure / windows passwords and for multiple passwords ' ' Norman Harker and JE McGimpsey 27-Dec-2002 (Version 1.1) ' Modified 2003-Apr-04 by JEM: All msgs to constants, and ' eliminate one Exit Sub (Version 1.1.1) ' Reveals hashed passwords NOT original passwords Const DBLSPACE As String = vbNewLine & vbNewLine Const AUTHORS As String = DBLSPACE & vbNewLine & _ "Adapted from Bob McCormick base code by" & _ "Norman Harker and JE McGimpsey" Const HEADER As String = "AllInternalPasswords User Message" Const VERSION As String = DBLSPACE & "Version 1.1.1 2003-Apr-04" Const REPBACK As String = DBLSPACE & "Please report failure " & _ "to the microsoft.public.excel.programming newsgroup." Const ALLCLEAR As String = DBLSPACE & "The workbook should " & _ "now be free of all password protection, so make sure you:" & _ DBLSPACE & "SAVE IT NOW!" & DBLSPACE & "and also" & _ DBLSPACE & "BACKUP!, BACKUP!!, BACKUP!!!" & _ DBLSPACE & "Also, remember that the password was " & _ "put there for a reason. Don't stuff up crucial formulas " & _ "or data." & DBLSPACE & "Access and use of some data " & _ "may be an offense. If in doubt, don't." Const MSGNOPWORDS1 As String = "There were no passwords on " & _ "sheets, or workbook structure or windows." & AUTHORS & VERSION Const MSGNOPWORDS2 As String = "There was no protection to " & _ "workbook structure or windows." & DBLSPACE & _ "Proceeding to unprotect sheets." & AUTHORS & VERSION Const MSGTAKETIME As String = "After pressing OK button this " & _ "will take some time." & DBLSPACE & "Amount of time " & _ "depends on how many different passwords, the " & _ "passwords, and your computer's specification." & DBLSPACE & _ "Just be patient! Make me a coffee!" & AUTHORS & VERSION Const MSGPWORDFOUND1 As String = "You had a Worksheet " & _ "Structure or Windows Password set." & DBLSPACE & _ "The password found was: " & DBLSPACE & "$$" & DBLSPACE & _ "Note it down for potential future use in other workbooks by " & _ "the same person who set this password." & DBLSPACE & _ "Now to check and clear other passwords." & AUTHORS & VERSION Const MSGPWORDFOUND2 As String = "You had a Worksheet " & _ "password set." & DBLSPACE & "The password found was: " & _

如何破解EXCEL工作表保护密码忘记密码怎么办

如何破解EXCEL工作表保护密码忘记密码怎么办 1.新建一个EXCEL工作表，而后点击另存为，讲表格保存为启用宏的工作表 * ■乐 碍乐雄迥 -* >计■尙 二0Q) .... ㈱ 亍总HI “ ■ I i ■ * \ Jfcft禺呵第證Mkrp^pft Qffiy fxeel JDQ7 工作褰x I gm [EHMI呦 怔■: Ad>51iAk±VAt4f t?nfl； 2. 一次点击开发工具---录制新宏，在弹出的对话框内修改宏名称而后确定 ft 真面布局公式敖掠审同视冒开裁工員 D F 254 3.依次点击开发工具停止录制宏，宏录制完成

| J fFik^j| 匮独 画Mffi植近三t 陥比疙上窸甜 空釦模式劑执行龙话框 代再 4.依次点击开发工具，---宏----在弹出的对话框找到我们刚才录制的宏名称而后进入 VBA界面 处8屯简开林工貝 能t ■BS| 斫厨丁亓的二作輝 说閉 5.在VBA界面，全选里面的代码，而后删除，讲里面的代码全部删除完

Mkroioft visual - Microsoft Office Excel 200?工荷txlsx 文件⑥锚也迺世）磁?惜式型谒试曲迳行逊Zft? 尹碗詠笛莆口呦 [

解除Excel密码保护的方法

Excel密码保护的解除方法 Excel密码保护的解除方法与解除原理 Excel弹出“您试图更改的单元格或图表受保护，因而是只读的。若要修改受保护单元格或图表，请先使用…撤消工作表保护?命令(在…审阅?选项卡的…更改?组中)来取消保护。可能会提示您输入密码。”窗口，如下图。 出现这种情况，应该怎么解决呢？经过研究，找到了两种破解Excel工作表保护码的方法。 一、VBA宏代码破解法： 第一步：打开该文件，首先确认“宏”未被禁用，再切换到“视图”选项卡，点击“宏”→“录制宏”，出现“录制新宏”窗口，在“宏名”定义一个名称为：ABCDE（随意命名，如下图)，点击“确定”退出； 第二步：再点击“宏”→“查看宏”，选择“宏名”下的“ABCDE”并点击“编辑”，打开“Microsoft Visual Basic”编辑器，用如下内容替换右侧窗口中的所有代码：

Sub ABCDE() Dim i As Integer, j As Integer, k As Integer Dim l As Integer, m As Integer, n As Integer Dim i1 As Integer, i2 As Integer, i3 As Integer Dim i4 As Integer, i5 As Integer, i6 As Integer On Error Resume Next For i = 65 To 66: For j = 65 To 66: For k = 65 To 66 For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66 For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66 For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126 ActiveSheet.Unprotect Chr(i) & Chr(j) & Chr(k) & _ Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _ Chr(i4) & Chr(i5) & Chr(i6) & Chr(n) If ActiveSheet.ProtectContents = False Then MsgBox "One usable password is " & Chr(i) & Chr(j) & _ Chr(k) & Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & _ Chr(i3) & Chr(i4) & Chr(i5) & Chr(i6) & Chr(n) ActiveWorkbook.Sheets(1).Select Range("a1").FormulaR1C1 = Chr(i) & Chr(j) & _ Chr(k) & Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & _ Chr(i3) & Chr(i4) & Chr(i5) & Chr(i6) & Chr(n) Exit Sub End If Next: Next: Next: Next: Next: Next Next: Next: Next: Next: Next: Next End Sub 第三步：替换完窗口中的所有代码后，按F5，运行代码（需要一点时间，大概10秒钟）会出现(下图)，图中：AAAABBAABBBO就是通用的宏密码（此密码不一定就是原来设置的密码）。 第四步：切换“审阅”选项卡，点击“撤消工作表保护”，然后输入密码即可解除锁定。

破解EXCEL宏密码

如何破解excel宏的保护密码 第一步：打开该文件，先解除默认的“宏禁用”状态，方法是点击工具栏下的“选项”状态按钮，打开“Microsoft Office安全选项”窗口，选择其中的“启用此内容”，“确定”退出； 再切换到“视图”选项卡，点击“宏”→“录制宏”，出现“录制新宏”窗口，在“宏名”定义一个名称为：PasswordBreaker(图3)，点击“确定”退出；

第二步：再点击“宏”→“查看宏”，选择“宏名”下的“PasswordBrea ker”并点击“编辑”，打开“MicrosoftVisual Basic”编辑器，用如下内容替换右侧窗口中的所有代码： Sub PasswordBreaker() Dim i As Integer, j As Integer, k As Integer Dim l As Integer, m As Integer, n As Integer Dim i1 As Integer, i2 As Integer, i3 As Integer Dim i4 As Integer, i5 As Integer, i6 As Integer On Error Resume Next For i = 65 To 66: For j = 65 To 66: For k = 65 To 66 For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66 For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66 For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126 ActiveSheet.Unprotect Chr(i) & Chr(j) & Chr(k) & _ Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _ Chr(i4) & Chr(i5) & Chr(i6) & Chr(n) If ActiveSheet.ProtectContents = False Then MsgBox "One usable password is " & Chr(i) & Chr(j) & _ Chr(k) & Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & _ Chr(i3) & Chr(i4) & Chr(i5) & Chr(i6) & Chr(n) ActiveWorkbook.Sheets(1).Select Range("a1").FormulaR1C1 = Chr(i) & Chr(j) & _

EXCEL密码保护破解2010

EXCEL密码保护破解方法: 1\打开文件 2\工具---宏----录制新宏---输入名字如:aa 3\停止录制(这样得到一个空宏) 4\工具---宏----宏,选aa,点编辑按钮 5\删除窗口中的所有字符(只有几个),替换为下面的内容:(复制吧) 6\关闭编辑窗口 7\工具---宏-----宏,选AllInternalPasswords,运行,确定两次,等2分钟,再确定.OK,没有密码了!! 代码如下： Public Sub AllInternalPasswords() ' Breaks worksheet and workbook structure passwords. Bob McCormick ' probably originator of base code algorithm modified for coverage ' of workbook structure / windows passwords and for multiple passwords ' ' Norman Harker and JE McGimpsey 27-Dec-2002 (Version 1.1) ' Modified 2003-Apr-04 by JEM: All msgs to constants, and ' eliminate one Exit Sub (Version 1.1.1)

' Reveals hashed passwords NOT original passwords Const DBLSPACE As String = vbNewLine & vbNewLine Const AUTHORS As String = DBLSPACE & vbNewLine & _ "Adapted from Bob McCormick base code by" & _ "Norman Harker and JE McGimpsey" Const HEADER As String = "AllInternalPasswords User Message" Const VERSION As String = DBLSPACE & "Version 1.1.1 2003-Apr-04" Const REPBACK As String = DBLSPACE & "Please report failure " & _ "to the microsoft.public.excel.programming newsgroup." Const ALLCLEAR As String = DBLSPACE & "The workbook should " & _ "now be free of all password protection, so make sure you:" & _ DBLSPACE & "SAVE IT NOW!" & DBLSPACE & "and also" & _ DBLSPACE & "BACKUP!, BACKUP!!, BACKUP!!!" & _ DBLSPACE & "Also, remember that the password was " & _ "put there for a reason. Don't stuff up crucial formulas " & _ "or data." & DBLSPACE & "Access and use of some data " & _ "may be an offense. If in doubt, don't." Const MSGNOPWORDS1 As String = "There were no passwords on " & _ "sheets, or workbook structure or windows." & AUTHORS & VERSION Const MSGNOPWORDS2 As String = "There was no protection to " & _ "workbook structure or windows." & DBLSPACE & _ "Proceeding to unprotect sheets." & AUTHORS & VERSION

excel2007密码保护破解方法

破解EXCEL2007的密码 Excel 2007密码保护的解除方法及原理 Excel弹出“您试图更改的单元格或图表受保护，因而是只读的。若要修改受保护单元格或图表，请先使用…撤消工作表保护?命令(在…审阅?选项卡的…更改?组中)来取消保护。可能会提示您输入密码。” 出现这种情况，应该怎么解决呢？经过研究，找到了两种破解Excel工作表保护码的方法。 一、VBA宏代码破解法： 第一步：打开该文件，用另存为的方式另存为启用宏的excel，（令存为文件中的第二项） 再打开此令存的文件并切换到“视图”选项卡，点击“宏”→“录制宏”，出现“录制新宏”窗口，在“宏名”定义一个名称为：PasswordBreaker，点击“确定”退出；

第二步：再点击“宏”→“查看宏”，选择“宏名”下的“PasswordBreaker”并点击“编辑”，打开“Microsoft Visual Basic”编辑器，用如下内容替换右侧窗口中的所有代码： Sub PasswordBreaker() Dim i As Integer, j As Integer, k As Integer Dim l As Integer, m As Integer, n As Integer Dim i1 As Integer, i2 As Integer, i3 As Integer Dim i4 As Integer, i5 As Integer, i6 As Integer On Error Resume Next For i = 65 To 66: For j = 65 To 66: For k = 65 To 66 For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66 For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66 For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126 ActiveSheet.Unprotect Chr(i) & Chr(j) & Chr(k) & _ Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _ Chr(i4) & Chr(i5) & Chr(i6) & Chr(n) If ActiveSheet.ProtectContents = False Then MsgBox "One usable password is " & Chr(i) & Chr(j) & _ Chr(k) & Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & _ Chr(i3) & Chr(i4) & Chr(i5) & Chr(i6) & Chr(n) ActiveWorkbook.Sheets(1).Select

破解EXCEL工作表保护密码的简单方法

破解EXCEL工作表保护密码的简单方法 你是否给excel文件设置了保护工作表密码，现在要撤消工作表保护，但密码却忘了，自己把锁在了门外，真尴尬呀！怎么办？下面的方法将轻松解决： 本人亲测，完全可以成功，但是本方法只用于解决自己的文件忘记密码，请勿进行违法行为，一切后果本人不负责任 1.打开你的受保护的文件 2.工具---宏----录制新宏---输入名字如:aa 3.停止录制(这样得到一个空宏) 4.工具---宏----宏,选aa,点编辑按钮 5.删除窗口中的所有字符,替换为下面的内容:(复制吧) 6.关闭编辑窗口 7.工具---宏-----宏,选AllInternalPasswords,运行,确定两次,等2分钟,再确定.OK,没有密码了!! 内容如下： Public Sub AllInternalPasswords() ' Breaks worksheet and workbook structure passwords. Bob McCormick ' probably originator of base code algorithm modified for coverage ' of workbook structure / windows passwords and for multiple passwords ' ' Norman Harker and JE McGimpsey 27-Dec-2002 (Version 1.1) ' Modified 2003-Apr-04 by JEM: All msgs to constants, and ' eliminate one Exit Sub (Version 1.1.1) ' Reveals hashed passwords NOT original passwords Const DBLSPACE As String = vbNewLine&vbNewLine Const AUTHORS As String = DBLSPACE &vbNewLine& _ "Adapted from Bob McCormick base code by" & _ "Norman Harker and JE McGimpsey" Const HEADER As String = "AllInternalPasswords User Message" Const VERSION As String = DBLSPACE & "Version 1.1.1 2003-Apr-04" Const REPBACK As String = DBLSPACE & "Please report failure " & _ "to the microsoft.public.excel.programming newsgroup." Const ALLCLEAR As String = DBLSPACE & "The workbook should "& _ "now be free of all password protection, so make sure you:" & _ DBLSPACE & "SAVE IT NOW!" & DBLSPACE & "and also" & _ DBLSPACE & "BACKUP!, BACKUP!!, BACKUP!!!" & _ DBLSPACE & "Also, remember that the password was "& _ "put there for a reason. Don't stuff up crucial formulas "& _ "or data." & DBLSPACE & "Access and use of some data "& _ "may be an offense. If in doubt, don't." Const MSGNOPWORDS1 As String = "There were no passwords on "& _ "sheets, or workbook structure or windows." & AUTHORS & VERSION

30秒破解EXCEL密码

30秒破解EXCEL密码 1\打开文件 2\工具---宏----录制新宏---输入名字如:aa 3\停止录制(这样得到一个空宏) 4\工具---宏----宏,选aa,点编辑按钮 5\删除窗口中的所有字符(只有几个),替换为下面的内容:(复制吧) 6\关闭编辑窗口 7\工具---宏-----宏,选AllInternalPasswords,运行,确定两次,等2分钟,再确定.OK,没有密码了!! 内容如下： Public Sub AllInternalPasswords() ' Breaks worksheet and workbook structure passwords. Bob McCormick ' probably originator of base code algorithm modified for coverage ' of workbook structure / windows passwords and for multiple passwords ' ' Norman Harker and JE McGimpsey 27-Dec-2002 (Version 1.1) ' Modified 2003-Apr-04 by JEM: All msgs to constants, and ' eliminate one Exit Sub (Version 1.1.1) ' Reveals hashed passwords NOT original passwords Const DBLSPACE As String = vbNewLine & vbNewLine Const AUTHORS As String = DBLSPACE & vbNewLine & _ "Adapted from Bob McCormick base code by" & _ "Norman Harker and JE McGimpsey" Const HEADER As String = "AllInternalPasswords User Message" Const VERSION As String = DBLSPACE & "Version 1.1.1 2003-Apr-04" Const REPBACK As String = DBLSPACE & "Please report failure " & _ "to the microsoft.public.excel.programming newsgroup." Const ALLCLEAR As String = DBLSPACE & "The workbook should " & _ "now be free of all password protection, so make sure you:" & _ DBLSPACE & "SAVE IT NOW!" & DBLSPACE & "and also" & _ DBLSPACE & "BACKUP!, BACKUP!!, BACKUP!!!" & _ DBLSPACE & "Also, remember that the password was " & _ "put there for a reason. Don't stuff up crucial formulas " & _ "or data." & DBLSPACE & "Access and use of some data " & _ "may be an offense. If in doubt, don't." Const MSGNOPWORDS1 As String = "There were no passwords on " & _ "sheets, or workbook structure or windows." & AUTHORS & VERSION Const MSGNOPWORDS2 As String = "There was no protection to " & _ "workbook structure or windows." & DBLSPACE & _ "Proceeding to unprotect sheets." & AUTHORS & VERSION Const MSGTAKETIME As String = "After pressing OK button this " & _ "will take some time." & DBLSPACE & "Amount of time " & _ "depends on how many different passwords, the " & _ "passwords, and your computer's specification." & DBLSPACE & _

破解EXCEL系列文件保护密码的方法

破解EXCEL系列文件保护密码的方法,好用(转载) 2008-06-04 16:30:48 业界| 评论(39) | 浏览(3403) 财务部重要的EXCEL报表的被人设置了保护,我把他破解了,就是用的这个代码!强烈推荐大家电脑一族或者办公一族,以后没准能派上用场! 在网上找到了这份破解代码，成功破解了，但不能找到原表的密码，这是最遗憾的。还有破解的表的安全系数会低点。对工作报表一族超级无敌有用！！ 方法: 1打开文件 2工具---宏----录制新宏---输入名字如:aa 3停止录制(这样得到一个空宏) 4工具---宏----宏,选aa,点编辑按钮 5删除窗口中的所有字符(只有几个),替换为下面的内容:(复制吧) 6关闭编辑窗口 7工具---宏-----宏,选AllInternalPasswords,运行,确定两次,等2分钟,再确定.OK,没有密码了!! 内容如下： Public Sub AllInternalPasswords()

' Breaks worksheet and workbook structure passwords. Bob McCormick ' probably originator of base code algorithm modified for coverage ' of workbook structure / windows passwords and for multiple passwords ' ' Norman Harker and JE McGimpsey 27-Dec-2002 (Version 1.1) ' Modified 2003-Apr-04 by JEM: All msgs to constants, and ' eliminate one Exit Sub (Version 1.1.1) ' Reveals hashed passwords NOT original passwords Const DBLSPACE As String = vbNewLine & vbNewLine Const AUTHORS As String = DBLSPACE & vbNewLine & _ "Adapted from Bob McCormick base code by" & _ "Norman Harker and JE McGimpsey" Const HEADER As String = "AllInternalPasswords User Message" Const VERSION As String = DBLSPACE & "Version 1.1.1 2003-Apr-04" Const REPBACK As String = DBLSPACE & "Please report failure " & _ "to the microsoft.public.excel.programming newsgroup." Const ALLCLEAR As String = DBLSPACE & "The workbook should " & _ "now be free of all password protection, so make sure you:" & _ DBLSPACE & "SAVE IT NOW!" & DBLSPACE & "and also" & _ DBLSPACE & "BACKUP!, BACKUP!!, BACKUP!!!" & _ DBLSPACE & "Also, remember that the password was " & _ "put there for a reason. Don't stuff up crucial formulas " & _ "or data." & DBLSPACE & "Access and use of some data " & _ "may be an offense. If in doubt, don't." Const MSGNOPWORDS1 As String = "There were no passwords on " & _ "sheets, or workbook structure or windows." & AUTHORS & VERSION Const MSGNOPWORDS2 As String = "There was no protection to " & _ "workbook structure or windows." & DBLSPACE & _ "Proceeding to unprotect sheets." & AUTHORS & VERSION Const MSGTAKETIME As String = "After pressing OK button this " & _ "will take some time." & DBLSPACE & "Amount of time " & _ "depends on how many different passwords, the " & _ "passwords, and your computer's specification." & DBLSPACE & _ "Just be patient! Make me a coffee!" & AUTHORS & VERSION Const MSGPWORDFOUND1 As String = "You had a Worksheet " & _ "Structure or Windows Password set." & DBLSPACE & _ "The password found was: " & DBLSPACE & "$$" & DBLSPACE & _ "Note it down for potential future use in other workbooks by " & _ "the same person who set this password." & DBLSPACE & _ "Now to check and clear other passwords." & AUTHORS & VERSION Const MSGPWORDFOUND2 As String = "You had a Worksheet " & _ "password set." & DBLSPACE & "The password found was: " & _ DBLSPACE & "$$" & DBLSPACE & "Note it down for potential " & _ "future use in other workbooks by same person who " & _