当前位置：搜档网 › OEM6_Product_Naming_Guide Rev 1I

OEM6_Product_Naming_Guide Rev 1I

The OEM6 platform offers comprehensive support for all current and upcoming GNSS constellations and satellite signals including GPS, GLONASS, Galileo and Compass. The name of a receiver is broken into 5 distinct categories: [Hardware]-[Channel Configuration]-[Positioning]-[Data Logging Rate and Communication]-[Options] that are used to identify the model and its characteristics.

Note: The engineering model names are synchronized with OEM6 part names.

For example, the part number OEM628V-D2S-R0G-TTN-S2-A is made up of the following:

Hardware

Hardware Platform OEM =Denotes that the part is an OEM hardware platform. Other example prefixes include SMART antenna or enclosure products.

Family 6 = Identifies the receiver as a part of the 6 family.

Form Factor 2 = 100 x 60mm and backwards compatible with the OEMV-2?

Tracking Capability HW Option 8 = Signals tracked include GPS, GLONASS, Galileo, L1/E1/L2/ L5/E5a/E5b and L-band V = Additional hardware options. For example, High-Vibe Oscillator

Channel Configuration

Constellation D = Denotes the constellation(s) used in the channel configuration. For this example, the receiver model has a GPS + GLONASS channel configuration. Frequency 2 = Identifies which frequencies make up the configuration. This example model includes L1/L2/E1.

Other Systems S =Defines any other optional system(s) used in the channel configuration. For this example model, it is SBAS.

Positioning

Carrier Phase Option R =Denotes the carrier phase used for RTK positioning. For this example, the receiver model has RTK Fixed, RTK Float, RTK Tx, DGPS Tx.

Base Limit 0 =Identifies the baseline capability. This example model has an unlimited baseline limit.

Pseudorange Option G =Defines the pseudorange option(s) available on the receiver model. For this example, it is GL1DE?.

Data Logging and

Communication

Measure Rate T =Denotes the available data logging rate. For this example it is 20 Hz.

Position Rate T =Identifies the position rate capabilities of the receiver model. This example model is capable of a position rate of 20 Hz.

Correction Services N =Defines the communication options, including correction services, of the receiver. For this example it is NTRIP.

SPAN

INS Mode S = SPAN Enabled

IMU Grade 2 = Low Grade Tactical

Options

Option 1 A =Denotes additional software options on the receiver model. This example model includes the API (Application Programming Interface)option.

All the options for each category are listed in Table 1, on the following page.

The following table breaks down the categories in the example model and lists all the other available options.

Table 1: Hardware Platform and Firmware Model Naming Structure

Table 2: OEM6 Card Hardware Platform Naming Convention

Hardware Platform

H a r d w a r e P l a t f o r m

F a m i l y

F o r m F a c t o r (m m )

T r a c k i n g C a p a b i l i t y

H a r d w a r e O p t i o n s

char [1] char [2] char [3] char [4] char [5] char [6] char [7]* char [8]** char [9] char [10] O

71x46 1 GPS-L1 D Dual Antenna

Input A

Right Angle Antenna Connector

2 100x60 2 GPS-L1/L2 A Right Angle Antenna Connector B MMBX Antenna Connector

3 125x85 3 GPS-L1/L2/L5

B MMBX Antenna Connector

C Conformal Coating

GPS+GLONASS-L1/L2 L-Band

Conformal Coating R

Reverse Header Connector

GPS+GLONASS-L1/L2 R Reverse Header Connector V

High Vibe

7 GPS+GLONASS+Galileo - L1/E1/L2/L5/ E5a/E5b

High Vibe

8 GPS+GLONASS+Galileo - L1/E1/L2/L5/ E5a/E5b L-Band

OEM6? Product Naming Guide

Table 3: FLEX6 Enclosure Hardware Platform Naming Convention

Hardware Platform

H a r d w a r e P l a t f o r m

F a m i l y F o r m F a c t o r (m m )

T r a c k i n g C a p a b i l i t y

H a r d w a r e O p t i o n s

char [1] char [2] char [3] char[4] char [5] char [6] char [7]

char [8]*

char [9]**

char [10] F

100x60

GPS+GLONASS+Galileo -

L1/E1/L2/L5/ E5a/E5b L-Band

Table 4: PP6 Enclosure Hardware Platform Naming Convention

Hardware Platform

H a r d w a r e P l a t f o r m

C a r d O p t i o n

C e l l u l a r O p t i o n

R e s e r v e d

H i g h V i b e O p t i o n

R e s e r v e d

R e s e r v e d char [1] char [2] char [3] char[4] char [5] char [6] char [7] char [8] char [9] char [10] P P 6 <> OEM638

<> No Cellular <>

<> Standard Vibe <>

AL1GN/Heading Option using OEM638+OEM615

HSPA/GPRS

V High Vibe

means no character is used

Table 4: Smart6L Hardware Platform Naming Convention

Table 5: Firmware Model Options

The following table outlines the OEM6 equivalents to the OEMV model numbers.

Table 2: OEM6/OEMV Equivalent Model Numbers

OEMV-3? OEMV-2? OEM628? Functionality

OEMV-3-RT2 OEMV-2-RT2 OEM628-G2L-R0G-TTR GPS only L1/L2, SBAS/L-Band, RTK Fixed, RTK Float, RTK Tx, DGPS Tx, Unlimited Baseline Length, GL1DE, 20 Hz Measurement

Outputs, 20 Hz Position Output, OmniSTAR/NTRIP

OEMV-3-RT2-F OEMV-2-RT2-F OEM628-G2S-R0G-CCN GPS only L1/L2, SBAS, RTK Fixed, RTK Float, RTK Tx, DGPS Tx, Unlimited Baseline Length, GL1DE, 100 Hz Measurement Outputs, 100

Hz Position Output, NTRIP

OEMV-3-RT2-G OEMV-2-RT2-G OEM628-D2L-R0G-TTR GPS+GLONASS L1/L2, SBAS/L-Band, RTK Fixed, RTK Float, RTK Tx, DGPS Tx, Unlimited Baseline Length, GL1DE, 20 Hz Measurement

Outputs, 20 Hz Position Output, OmniSTAR/NTRIP

OEMV-3-RT2-G-F OEMV-2-RT2-G-F OEM628-D2L-R0G-CCR GPS+GLONASS L1/L2, SBAS/L-Band, RTK Fixed, RTK Float, RTK Tx, DGPS Tx, Unlimited Baseline Length, GL1DE, 100 Hz Measurement

Outputs, 100 Hz Position Output, OmniSTAR/NTRIP

OEMV-3-RT2-G-Z OEMV-2-RT2-G-Z OEM628-D2S-Y0G-TTN GPS+GLONASS L1/L2, SBAS, Heading, Heading Pos, RTK Tx, DGPS Tx, Unlimited Baseline Length, GL1DE, 20 Hz Measurement

Outputs, 20 Hz Position Output, NTRIP

OEMV-3-RT2-Z OEMV-2-RT2-Z OEM628-G2S-Y0G-TTN GPS only L1/L2, SBAS, Heading, Heading Pos, RTK Tx, DGPS Tx, Unlimited Baseline Length, GL1DE, 20 Hz Measurement Outputs, 20

Hz Position Output, NTRIP

OEMV-3-L1L2 OEMV-2-L1L2 OEM628-G2L-B0G-TTR GPS only L1/L2, SBAS/L-Band, RTK Tx, DGPS Tx, Unlimited Baseline Length, GL1DE, 20 Hz Measurement Outputs, 20 Hz Position

Output, OmniSTAR/NTRIP

OEMV-3-L1L2-F OEMV-2-L1L2-F OEM628-G2S-B0G-CCN GPS only L1/L2, SBAS, RTK Tx, DGPS Tx, Unlimited Baseline Length, GL1DE, 100 Hz Measurement Outputs, 100 Hz Position Output,

NTRIP

OEMV-3-L1L2-G OEMV-2-L1L2-G OEM628-D2L-B0G-TTR GPS+GLONASS L1/L2, SBAS/L-Band, RTK Tx, DGPS Tx, Unlimited Baseline Length, GL1DE, 20 Hz Measurement Outputs, 20 Hz