搜档网
当前位置:搜档网 › Lecture Notes_06(09)

Lecture Notes_06(09)

Lecture Notes_06(09)
Lecture Notes_06(09)

GRIFFITH BUSINESS SCHOOL

Department of Accounting, Finance and Economics

2104AFE Management Accounting

Lecture 6

(Week Starting 7 September)

MASTER BUDGETING AND RESPONSIBILITY ACCOUNTING

Dr Allen Huang

Reading Material: Hongren, et al. Chapter 6

LEARNING OBJECTIVES

?Describe the master budget and explain its benefits

?Describe the advantages of budgets

?Prepare the operating budget and its supporting schedules

?Use computer-based financial planning models in sensitivity analysis ?Describe responsibility centres and responsibility accounting

?Explain how controllability relates to responsibility accounting

? Recognize the human aspects of budgeting

Budget and Budgeting Cycle

Budget Defined

A budget is the quantitative expression (including both financial and non-financial data) of a management’s plan for the future (planning). It also is an aid to communicating plans and coordinating actions that need to be taken to implement the plan (control). Budget is used as a framework for evaluating performance (evaluation), and can be used to motivate employees.

Strategic Plans and Budgeting Process

Effective budgeting integrates the company’s strategy into the budget process. Strategy specifies how an organization matches its own capabilities with the opportunities in the marketplace to accomplish its objectives.

The path to effective strategies include asking questions such as: ?What are our objectives?

?How do we create value for the customer while distinguishing ourselves from our competitors?

?Are the markets for our products local, regional, national, or global?

What are our market trends? How are we affected by the economy,

our industry, and our competitors?

?What organizational and financial structures serve us best?

?What are the risks and opportunities of alternative strategies, and what are our contingency plans if our preferred plan fails?

Well-managed companies usually follow an annual budget cycle including the following steps:

?Plan the performance of the company as a whole and of the subunits within the company.

?Senior managers communicate to subordinates a set of expectations against which performance will be measured.

?Management accountants investigate variations from plans, and corrective action may be taken.

?Management accountants and managers take into account market feedback, changed conditions, and their own experiences in making

plans for the upcoming period.

Strategy, Planning and Budgets, Illustrated

Advantages of Budgets

Provides a framework for judging performance

Motivates managers and other employees

Promotes coordination and communication among subunits within the company

Master Budgets

The master budget expresses management’s operating and financial plans for a specified period (usually a year). The master budget is actually a series of budgets including a set of budgeted financial statements (sometimes called pro forma statements).

Components of Master Budgets

Operating Budget – building blocks leading to the creation of the Budgeted Income Statement

Financial Budget – building blocks based on the Operating Budget that lead to the creation of the Budgeted Balance Sheet and the Budgeted Statement of Cash Flows

Operating Budget Steps

1. Prepare the Revenues Budget

2. Prepare the Production Budget (in Units)

3. Prepare the Direct Materials Usage Budget and Direct Materials

Purchases Budget

4. Prepare the Direct Manufacturing Labor Budget

5. Prepare the Manufacturing Overhead Costs Budget

6. Prepare the Ending Inventories Budget

7. Prepare the Cost of Goods Sold Budget

8. Prepare the Operating Expense (Period Cost) Budget

9. Prepare the Budgeted Income Statement

Financial Budget Steps (Based on the Operating Budgets):

1. Prepare the Capital Expenditures Budget (not covered here)

2. Prepare the Cash Budget

3. Prepare the Budgeted Balance Sheet

4. Prepare the Budgeted Statement of Cash Flows (not covered here) An Overview of Master Budget

Example: Stylistic Furniture Company

Stylistic Furniture prepares an Operating Budget for 2010.

Information needed for preparing budget is provided below:

?Stylistic sells two models of granite-top coffee tables – Casual and Deluxe.

?Direct materials inventory and finished goods inventory are costed using the first-in, first-out (FIFO) method.

?There are two types of direct materials used: red oak (RO) and granite slabs (GS). DM costs are variable with respect to units of output – coffee tables.

?Direct manufacturing labour workers are hired on an hourly basis; no overtime is worked.

?There are two cost drivers (used as allocation bases) for two MOH cost pools – direct manufacturing labour hours and setup labour hours.

?MOH-Operations, Direct manufacturing labour hours are the cost driver for the variable portion of manufacturing operations overhead.

The fixed component of manufacturing operations overhead is tied to the manufacturing capacity of 300,000 direct manufacturing labours hours that Stylistic has planned for 2010.

?MOH-Machine Setup, Setup labours hours are the cost driver for the variable portion of machine setup overhead. The fixed component of machine setup overhead is tied to the setup capacity of 15,000 setup labour hours that Stylistic has planned for 2010.

?Non-manufacturing costs consist of product design, marketing and distribution costs. All product design costs are fixed costs for 2010. The variable component of marketing costs equals the 6.5% sales commission on revenues paid to salespeople. The variable portion of distribution costs varies with cubic feet of tables moved.

The following data are available for 2010 budget:

Direct Materials:

Red Oak $ 7 per board foot (b.f.)

Granite $ 10 per square foot (s.f.)

Direct Manufacturing Labour: $20 per hour

Content of Each Product Unit:

Casual Granite Table Deluxe Granite Table

Red Oak 12 board feet 12 board feet

Granite 6 square feet 8 square feet

Direct Labour 4 hours 6 hours

Casual Granite Table Deluxe Granite Table

Expected sales in units 50,000 10,000

Selling price $ 600 $ 800

Target ending inventory in units 11,000 500

Beginning inventory in units 1,000 500

Beginning inventory in dollars $384,000 $262,000

Direct Materials Inventories:

Oak

Granite

Red

Beginning inventory 70,000 b.f. 60,000 s.f.

Target ending inventory 80,000 b.f. 20,000 s.f.

Operating Budgets:

Schedule 1: Revenue Budget

For the Year Ending December 31, 2010

Units Selling Price Total Revenue

Casual 50,000 $ 600 $ 30,000,000

10,000 $

800 $ 8,000,000

Deluxe

38,000,000

Total $

Schedule 2: Production Budget (in units)

For the Year Ending December 31, 2010

Deluxe Casual

Budgeted unit sales (Schedule 1) 50,000 10,000

+ Target ending finished goods inventory 11,000 500

= Total required units 61,000 10,500

– beginning finished goods inventory 1,000 500

= Units of finished goods to be produced 60,000

10,000

Budget Production = Budget Sales + Target Ending Inventory – Beginning

Inventory (all in units)

Schedule 3A : Direct Material Usage Budget in Quantity and Dollars

For the Year Ending December 31, 2010

Red

Oak Granite Total Physical Units Budget

Direct materials required for Casual Tables

(60,000 x 12 b.f. and 6 s.f.) 720,000 b.f. 360,000 s.f.

Direct materials required for Deluxe Tables

(10,000 x 12 b.f. and 8 s.f.) 120,000 b.f. 80,000 s.f.

Total Quantity of DM to be used 840,000 b.f. 440,000 s.f.

Cost Budget

Available from beginning DM inventory (FIFO)

Red Oak: 70,000 b.f. x $7 per b.f. $ 490,000

Granite: 60,000 s.f. x $10 per s.f. $ 600,000

To be purchased this period

Red Oak: (840,000 – 70,000) bf x $7 per bf 5,390,000

Granite: (440,000 – 60,000) sf x $10 per sf __________ 3,800,000

DM to be used in this period $ 5,880,000 $ 4,400,000 $10,280,000

Schedule 3B : Direct Material Purchase Budget

For the Year Ending December 31, 2010

Red Oak Granite Total

Physical Units Budget

To be used in production (from Schedule 3A) 840,000 bf 440,000 sf

+ Target ending inventory 80,000 bf 20,000 sf

= Total requirements 920,000 bf 460,000 sf

– Beginning inventory 70,000 bf 60,000 sf

= Purchases to be made 850,000 bf 400,000 sf

Cost Budget

Red Oak: 850,000 bf x $7 per bf $ 5,950,000

Granite: 400,000 sf x $10 per sf __________ $ 4,000,000

Purchases $ 5,950,000 $ 4,000,000 $ 9,950,000

Schedule 4: Direct Manufacturing Labour Costs Budget

For the Year Ending December 31, 2010

Output Units Produced (Schedule 2) DL Hours per unit Total Hours Hourly Wage

Rate

Total

Casual 60,000 4 240,000 $ 20 $ 4,800,000

Deluxe 10,000 6 60,000 $ 20 $ 1,200,000

Total 300,000 $ 6,000,000

Stylistic’s managers’ forecast the following setup information for the Casual

and Deluxe tables:

Deluxe

Total Casual

1. Quantity of tables to be produced 60,000 tables 10,000 tables

50 tables/batch 40 tables/batch

2. Number of tables to be produced

per batch

3. Number of batches (1) ÷ (2) 1,200 batches 250 batches

4. Setup time per batch 10 hours/batch 12 hours/batch

5. Total setup-hours (3) x (4) 12,000 hours 3,000 hours 15,000 hours

6. Setup-hour per table (5) ÷ (1) 0.2 hour 0.3 hour

Schedule 5: Manufacturing Overhead Costs Budget

For the Year Ending December 31, 2010

Manufacturing Operations Overhead Costs

Variable Costs

Supplies $ 1,500,000

Indirect manufacturing labour 1,680,000

Power (support department costs) 2,100,000

6,480,000

Maintenance (support department costs) 1,200,000 $

Fixed costs (capacity of 300,000 DL hours)

Depreciation 1,020,000

Supervision 390,000

Power (support department costs) 630,000

Maintenance (support department costs) 480,000 2,520,000

Total manufacturing operations overhead $9,000,000

Budgeted manufacturing operations overhead rate =$9,000,000÷300,000=$30

Machine Setup Overhead Costs

Variable Costs

Supplies $ 390,000

Indirect manufacturing labour 840,000

1,320,000

Power (support department costs) 90,000 $

Fixed costs (capacity of 15,000 setup hours)

Depreciation 603,000

Supervision 1,050,000

Power (support department costs) 27,000 1,680,000

Total machine setup overhead $3,000,000

Total manufacturing overhead $12,000,000

Budgeted machine setup overhead rate =$3,000,000÷15,000 = $200

Schedule 6A : Unit Costs of Ending Finished Goods Inventory

December 31, 2010

Casual Tables Deluxe Tables Cost per Unit of Input Input per Unit of Output Total Input per Unit of

Output

Total

Red Oak $ 7 12 bf $ 84 12 bf $ 84

Granite 10 6 sf 60 8 sf 80

Direct manufacturing labour 20 4 hours 80 6 hours 120

Operations overhead 30 4 hours 120 6 hours 180

Machine setup overhead 200 0.2 hours 40 0.3 hours 60

Total $ 384

$ 524

Schedule 6B : Ending Inventory Budget

December 31, 2010

Quantity Cost per Unit Total

Direct Material

Red Oak 80,000 $ 7 $ 560,000

Granite 20,000 10 200,000 $ 760,000

Finished Goods

Casual 11,000 $ 384 $4,224,000

Deluxe 500 524 262,000 4,486,000

Total ending inventory $5,246,000

Schedule 7: Cost of Goods Sold Budget

For the Year Ending December 31, 2010

From Schedules

Total

Beginning finished goods inventory, January 1, 2010

Given $ 646,000

+ Direct materials used 3A $10,280,000

+ Direct manufacturing labour 4 6,000,000

+ Manufacturing overhead 5 12,000,000

Cost of goods manufactured 28,280,000

= Cost of goods available for sales 28,926,000

Deduct ending finished goods inventory, December 31,2010

6B 4,486,000

Cost of Goods Sold $24,440,000

Schedule 8: Non-manufacturing Costs Budget For the Year Ending December 31, 2010

Business Function Variable

Costs Fixed

Costs

Total

Costs

Product Design $1,024,000 $1,024,000 Marketing

(Variable cost: $38,000,000 x 0.065) $2,470,000 1,330,000 3,800,000 Distribution

(Variable cost: $2 x 1,140,000 cu ft.) 2,280,000 1,596,000 3,876,000 Total $4,750,000 $3,950,000 $8,700,000 Budgeted Income Statement

Budgeted Income Statement

For the Year Ending December 31, 2010

Revenue Schedule 1 $ 38,000,000 Cost of goods sold Schedule 7 24,440,000 Gross margin 13,560,000 Operating costs

Product design Schedule 8 $ 1,024,000

Marketing costs Schedule 8 3,800,000

Distribution costs Schedule 8 3,876,000 8,700,000 Operating income $ 4,860,000 Financial Budget

Basic financial budgets include the following:

1. Capital Expenditures Budget (not covered in this course)

2. Cash Budget

3. Budgeted Balance Sheet

4. Budgeted Statement of Cash Flows (not covered in this course)

In Cash Budget, we work out cash receipts, cash disbursements (payments) and cash balances for each month or quarter.

In Stylistic, quarterly cash budgets are prepared. The relevant data (cash collected from sales revenue and cash payments on various items) are provided below:

1st Quarter 2nd Quarter 3rd Quarter 4th Quarter Collections from customers $ 9,136,600 $10,122,000$10,263,000 $ 8,561,200 Disbursements

Direct materials 2,947,605 2,714,612 2,157,963 2,155,356 Payroll 3,604,512 2,671,742 2,320,946 2,562,800 Manufacturing overhead 2,109,018 1,530,960 1,313,568 1,463,450 Non-manufacturing costs 1,847,750 1,979,000 1,968,250 1,705,000 Machinery purchase -- -- 758,000 --

Income taxes 725,000 400,000 400,000 400,000 Usually, the cash receipts and disbursements are calculated based on the

lags between the items reported on the accrual basis of accounting in an

income statement and balance sheet and their related cash receipts and

payments.

Take accounts receivable (resulted from sales on credit) and cash collected

from customers as example. Stylistic estimates that 80% of all sales made in

a quarter are collected in the same quarter and the remaining 20% are

collected in the following quarter. Assume sales by quarter are as below:

1st Quarter $ 9,282,000

2nd Quarter 10,332,000

3rd Quarter 10,246,000

4th Quarter 8,140,000

Whole year $ 38,000,000

Schedule of Cash Collections

1st Quarter 2nd Quarter 3rd Quarter 4th Quarter Account receivable beginning

balance (sales made last year)

$ 1,711,000

From 1st Quarter 2010 sales

(9,282,000 x 0.8; 9,282,000 x 0.2)

7,425,600$1,856,400

From 2nd Quarter 2010 sales

(10,332,000 x 0.8; 10,332,000 x 0.2)

8,265,600 $2,066,400

From 3rd Quarter 2010 sales

(10,246,000 x 0.8; 10,246,000 x 0.2)

8,196,800 $2,049,200

From 4th Quarter 2010 sales

(8,140,000 x 0.8; 8,140,000 x 0.2) _________ ____________________ 6,512,000 _________

Total collections $ 9,136,600$10,122,000$10,263,200 $8,561,200

Cash Budget

Stylistic Furniture

Cash Budget

For the Year Ending December 31, 2010

1st Quarter 2nd Quarter 3rd Quarter 4th Quarter Year Cash balance, beginning $ 300,000 $ 350,715 $ 350,657 $ 350,070 $ 300,000 Add receipts

Collections from customers 9,136,600 10,122,000 10,263,200 8,561,200 38,083,000 Total cash available for needs 9,436,600 10,472,715 10,613,857 8,911,270 38,383,000 Deduct disbursements

Direct materials 2,947,605 2,714,612 2,157,963 2,155,356 9,975,536 Payroll 3,604,512 2,671,742 2,320,946 2,562,800 11,160,000 Manufacturing overhead 2,109,018 1,530,964 1,313,568 1,463,450 6,417,000 Non-manufacturing costs 1,847,750 1,979,000 1,968,250 1,705,000 7,500,000 Machinery purchase -- -- 758,000 -- 758,000 Income taxes 725,000 400,000 400,000 400,000 1,925,000 Total disbursements 11,233,885 9,296,318 8,918,727 8,286,606 37,735,536 Minimum cash balance desired 350,000 350,000 350,000 350,000 350,000 Total cash needed 11,583,885 9,646,318 9,268,727 8,636,606 38,085,536 Cash excess (deficiency) $(2,147,285) $ 826,397 $1,345,130 $ 274,664 $ 297,464 Financing

Borrowing (at beginning) $ 2,148,000 0 0 0 2,148,000 Repayment (at end) 0 (779,000) (1,234,000) (135,000) (2,148,000) Interest (at 12% per year) 0 (46,740) (111,060) (16,200) (174,000)

(825,740) (1,345,060) (151,200) (174,000) Total effects of financing $ 2,148,000 $

473,464 $ 473,464 Cash balance, ending $ 350,715 $ 350,657 $ 350,070 $

Budgeted Income Statement (include interest expense and income

taxes):

Budgeted Income Statement

For the Year Ending December 31, 2010

Revenue Schedule 1 $ 38,000,000

Cost of goods sold Schedule 7 24,440,000

Gross margin 13,560,000

Operating costs

Product design Schedule 8 $ 1,024,000

Marketing costs Schedule 8 3,800,000

Distribution costs Schedule 8 3,876,000 8,700,000

Operating income $ 4,860,000

Interest expense Cash Budget 174,000

Income before income taxes 4,686,000

Income taxes (at 40%) 1,874,000

Net income $ 2,811,600

Budgeted Balance Sheet

Stylistic Furniture

Budgeted Balance Sheet

December 31, 2010

Assets

Current Assets

Cash (from Cash Budget) $ 473,464

Accounts receivable 1,628,000

Direct materials inventory (6B) 760,000

Finished goods inventory (6B) 4,486,000 $ 7,347,464 Property, plant and equipment

Land 2,000,000

Building and equipment $22,758,000

Accumulated depreciation (8,523,000) 14,235,000 16,235,000 Total Assets $23,582,464

Liabilities and Stockholders’ Equity

Current Liabilities

Accounts payable $ 878,464

Income taxes payable 274,400 $ 1,152,864 Stockholders’ Equity

Common stock 3,500,000

Retained earnings 18,929,600 22,429,600 Total Liabilities and Equity $23,582,464 Purchase on account and cash payments

(An example unrelated Stylistic Furniture)

Bear Company has the following information:

Month Budgeted Purchases

January $26,800

February 29,000

March 30,520

April 29,480

May 27,680

Purchases are paid for in the following manner:

10% of the purchase amount in the month of purchase

50% of the purchase amount in the month after purchase

40% of the purchase amount in the second month after purchase

What are the amounts of cash payment made in March, April and May?

Schedule of Cash Payment

May

April

Purchases March

January 26,800 x 0.4 $ 10,720

February 29,000 x 0.5; 0.4 14,500 $ 11,600

March 30,520 x 0.1; 0.5; 0.4 3,052 15,260 $ 12,208

April 29,480 x 0.1; 0.5 2,948 14,740

May 27,680 x 0.1 ________ ________ 2,768

Total payments $ 28,272 $ 29,808 $ 29,716

Other Budgeting Issues

Use of financial-planning software

Financial-planning software (Excel) is widely used in the budgeting process,

which has significantly improved the efficiency of budget preparation. The computer software may also be employed to conduct sensitivity (“what-if”)

analysis to assist in the budgetary process.

For example, we can manipulate many of the determining variables and see

what effect these changes may have on the operating income. The variables

that can be manipulated individually or jointly include:

? Selling price

? Sales volume

?Costs of DM, DL, MOH, etc.

Example:

Budgeting and the Organization: Responsibility Accounting

Responsibility Center – a part, segment, or subunit of a organization whose manager is accountable for a specified set of activities Responsibility Accounting – a system that measures the plans, budgets, actions and actual results of each Responsibility Center

Types of Responsibility Centers

1. Cost – accountable for costs only

2. Revenue – accountable for revenues only

3. Profit – accountable for revenues & costs

4. Investment – accountable for investments, revenues, and costs Responsibility and Controllability

Controllability is the degree of influence that a manager has over costs, revenues, or related items for which he is being held responsible Responsibility Accounting focuses on information sharing, not in laying blame on a particular manager

Budgets and Feedback

Budgets offer feedback in the form of variances: actual results deviate from budgeted targets

Variances provide managers with

Early warning of problems

A basis for performance evaluation

A basis for strategy evaluation

Budgeting and Human Behavior

The budgeting process may be abused both by superiors and subordinates, leading to negative outcomes

Superiors may dominate the budget process or hold subordinates accountable for events they have no control over

Subordinates may build “budgetary slack” into their budgets

Budgetary Slack

The practice of underestimating budgeted revenues, or overestimating budgeted expenses, in an effort to make the resulting budgeted goals (profits) more easily attainable.

Quizzes:

1.Which of the following is not a major benefit of budgets?

https://www.sodocs.net/doc/a12929602.html,pels planning

b.Eliminates innovation

c.Provides performance criteria

d.Promotes coordination and communication

Answer:

2.Dewitt Co. budgeted its activity for October 20x1 from the following

information:

?Sales are budgeted at $750,000. All sales are credit sales and a provision for doubtful accounts is made monthly at the rate of 2% of

sales.

?Merchandise inventory was $120,000 at September 30, 20x1, and an increase of $10,000 is planned for the month.

?All merchandise is marked up to sell at invoice cost plus 50%.

?Estimated cash disbursements for selling and administrative expenses for the month are $105,000.

?Depreciation for the month is projected at $25,000.

Dewitt is projecting operating income for October 20x1 in the amount of

a. $105,000.

b. $119,000.

c. $129,000.

d. $230,000.

Answer:

Sales

Cost of goods sold

Bad debts expense

S & A expense

Depreciation expense

Operating income

The following data apply to questions 3 and 4.

Hester Company budgets on an annual basis for its fiscal year. The following beginning and ending inventory levels (in units) are planned for the fiscal year of July 1, 20x1 through June 30, 20x2.

July 1, 20x1 June 30, 20x2

material1 40,000 10,000

Raw

Work in process 8,000 8,000

Finished goods 30,000 5,000

1 Three (3) units of raw material are needed to produce each unit of

finished product.

3. If Hester Company plans to sell 500,000 units during the 20x1–x2 fiscal year,

the number of units it would have to manufacture during the year would be:

units.

a. 505,000

units.

b. 500,000

units.

c. 480,000

units.

d. 475,000

Answer:

Sales

+Ending inventory

– Beginning inventory

Production

4. If 450,000 finished units were to be manufactured during the 20x1–x2 fiscal

year by Hester Company, the units of raw material needed to be purchased would be:

a. 1,350,000

units.

units.

b. 1,360,000

units.

c. 1,320,000

units.

d. 1,330,000

Answer:

Required for production

+ Ending inventory

– Beginning inventory

Purchases

5. Which of the following does not pertain to financial planning models in

software form?

a.Reduces computational burden and time required to prepare budgets

b.Eliminates need to update budgets as uncertainty resolved

c.Assists managers with sensitivity analysis

d.Performs calculations that are mathematical representations of

relationships in master budget

Answer:

The following data apply to questions 6 and 7 [Appendix].

Information pertaining to Brenton Corporation’s sales revenue is presented in the following table.

February March April

sales

$160,000 $150,000 $120,000

Cash

sales

300,000 400,000 280,000

Credit

Total sales $460,000 $550,000 $400,000

Management estimates that 5% of credit sales are not collectible. Of the credit sales that are collectible, 60% are collected in the month of sale and the remainder in the

month following the sale. Cost of purchases of inventory each month is 70% of the next month’s projected total sales. All purchases of inventory are on account; 25% are paid in the month of purchase, and the remainder is paid in the month following the purchase.

6. Brenton’s budgeted total cash receipts in April are

a. $448,000.

b. $437,000.

c. $431,600.

d. $328,000.

Answer:

Cash receipts

From April cash sales

From April credit sales

From March credit sales

collections

Total

7. Brenton’s budgeted total cash payments in March for inventory purchases are

a. $385,000.

b. $358,750.

c. $306,250.

d. $280,000.

Answer:

February purchases

March purchases

Total cash payments in March

----------------- End of Lecture Six -------------------?

数据库系统原理课后答案 第九章

9.1 名词解释 (1)OODBS:是指面向对象数据库系统,它既具数据库管理的基本功能,又能支持面向对象的数据模型。 (2)ORDBS:基于对象关系数据模型的DBS称为对象关系数据库系统(ORDBS)。 (3)平面关系模型:传统的关系模型称为“平面关系模型”,它要求关系模式具有第一范式(1NF)性质,关系具有规范化的结构。也就是规定属性值是不可分解的,即不允许属性值具有复合结构(元组或关系)。 (4)嵌套关系模型:是从平面关系模型发展而成的。它允许关系的属性值又可以是一个关系,而且可以出现多次嵌套。嵌套关系突破了1NF的定义框架,是“非1NF关系”。 (5)复合对象模型:在嵌套关系模型上进一步放宽要求。在关系定义上,集合与元组不再有交替出现的严格限制,此时的关系中,属性类型可以是基本数据类型、结构类型(元组类型)或集体类型(即关系类型)。 (6)数据的泛化/细化:是对概念之间联系进行抽象的一种方法。当在较低层上的抽象表达了 与之联系的较高层上抽象的特殊情况时,就称较高层上抽象是较低层上抽象的"泛化",而较低层上抽象是较高层上抽象的"细化"。 (7)对象关系模型:在传统关系数据基础上,提供元组、数组、集合等更为丰富的数据类型及处理新数据类型操作的能力而形成的数据模型。(注:传统关系模型只支持字符、数值、字串,布尔值等等基本数据类型及其处理功能) (8)类型级继承性:当继承性发生在类型级时,子类型继承了超类型的属性。也就是说,超类型所具有的属性,在子类上也具有。 (9)表级继承性:继承性也可发生在表级,(就是元组集合上发生继承),子表继承超表全部属性,超表中每个元组最多可以与子表中一个元组对应,而子表中的每个元组在超表中恰有一个元组对应,并在继承的属性值上具有相同的值。 (10)引用类型:数据类型可以嵌套定义,在嵌套引用时,不是引用对象本身,而是个用对象标识符(即指针),这种指针被称为引用类型。 (11)对象:客观世界中的实体经过抽象称为问题空间中的对象,它是对一组信息及其操作的描述。 (12)类:是具有相同的变量名和类型、相同的消息和使用方法的对象的集合。 (13)单重继承性:一个子类继承某一个超类的结构和特性,称为单重继承性。 (14)多重继承性:一个子类继承多个超类的结构和特性,称为多重继承性。 (15)对象标识:在面向对象语言中,对象标识是一个指针一级的概念,在对象创建的瞬间,由系统赋给每个对象一个“标识”,即系统内的一个唯一的指针,在对象生存期内,这个标识不可改变。 (16)对象包含:不同类的对象之间存在的包含关系称为对象包含。包含是一种“一部分”(is part of)的联系。 (17)类继承层次图:表示类继承关系的图,由超类名、子类名和一组线条自上而下有序的表示。(18)类包含层次图:表示对象包含关系的图,由一些具有包含关系的对象和线条自上而下表示(下方的对象为其连线所指上方对象的一部分)。 (19)持久数据:是指创建这些数据的程序运行终止后数据依然存在于系统之中。数据库中的关系就是持久数据。 (20)持久对象:程序运行结束后,被保留下来的对象称为持久对象。 (21)持久指针:持久指针可看作是数据库中指向对象的指针。持久化指针不像内存中的指针,它在程序执行后及数据重组后仍保持有效。 (22)持久化C++系统: 基于C++的持久化扩充的OODBS。

数据库题作业

数据库原理及应用作业 班级:学号:姓名: 第一章 一、单项选择题 1. 在数据管理技术的发展过程中,经历了人工管理阶段、文件系统阶段和数据库系统阶段。在这几个阶段中,数据独立性最高的是()阶段。 A. 数据库系统 B. 文件系统 C. 人工管理 D.数据项管理 2. 数据库系统与文件系统的主要区别是()。 A. 数据库系统复杂,而文件系统简单 B. 文件系统不能解决数据冗余和数据独立性问题,而数据库系统可以解决 C. 文件系统只能管理程序文件,而数据库系统能够管理各种类型的文件 D. 文件系统管理的数据量较少,而数据库系统可以管理庞大的数据量 3. 在数据库中存储的是()。 A. 数据 B. 数据模型 C. 数据及数据之间的联系 D. 信息 4. 数据库的特点之一是数据的共享,严格地讲,这里的数据共享是指()。 A. 同一个应用中的多个程序共享一个数据集合 B. 多个用户、同一种语言共享数据 C. 多个用户共享一个数据文件 D. 多种应用、多种语言、多个用户相互覆盖地使用数据集合 5. 数据库(DB)、数据库系统(DBS)和数据库管理系统(DBMS)三者之间的关系是()。 A. DBS包括DB和DBMS B. DBMS包括DB和DBS C. DB包括DBS和DBMS D. DBS就是DB,也就是DBMS 6. 数据库管理系统(DBMS)是()。 A. 一个完整的数据库应用系统 B. 一组硬件 C. 一组系统软件 D. 既有硬件,也有软件 7. 数据库是在计算机系统中按照一定的数据模型组织、存储和应用的()。 A. 文件的集合 B. 数据的集合 C. 命令的集合 D. 程序的集合 8. 支持数据库各种操作的软件系统是()。 A. 命令系统 B. 数据库管理系统 C. 数据库系统 D. 操作系统 9. 由计算机硬件、DBMS、数据库、应用程序及用户等组成的一个整体叫()。 A. 文件系统 B. 数据库系统 C. 软件系统 D. 数据库管理系统 10. 数据库系统中应用程序与数据库的接口是()。 A. 数据库集合 B. 数据库管理系统DBMS C. 操作系统OS D. 计算机中的存储介质 11. 在DBS中,DBMS和OS之间关系是()。 A. 并发运行 B. 相互调用 C. OS调用DBMS D. DBMS调用OS 12. 在数据库方式下,信息处理中占据中心位置的是()。

类与类之间的关系

类与类之间存在以下关系: (1)泛化(Generalization) (2)关联(Association) (3)依赖(Dependency) (4)聚合(Aggregation) 1.泛化(Generalization) [泛化] 表示类与类之间的继承关系,接口与接口之间的继承关系,或类对接口的实现关系。一般化的关系是从子类指向父类的,与继承或实现的方法相反。 父类父类实例=new 子类() [UML图](图1.1) 2.依赖(Dependency) [依赖] 对于两个相对独立的对象,当一个对象负责构造另一个对象的实例,或者依赖另一个对象的服务时,这两个对象之间主要体现为依赖关系。 依赖关系表现在局部变量,方法的参数,以及对静态方法的调用 [现实例子] 比如说你要去拧螺丝,你是不是要借助(也就是依赖)螺丝刀(Screwdriver)来帮助你完成拧螺

丝(screw)的工作 [UML表现](图1.2) 3.关联(Association) [关联] 对于两个相对独立的对象,当一个对象的实例与另一个对象的一些特定实例存在固定的对应关系时,这两个对象之间为关联关系。[具体表现] 关联关系是使用实例变量来实现[现实例子] 比如客 3.关联(Association) [关联] 对于两个相对独立的对象,当一个对象的实例与另一个对象的一些特定实例存在固定的对应关系时,这两个对象之间为关联关系。 [具体表现] 关联关系是使用实例变量来实现 [现实例子] 比如客户和订单,每个订单对应特定的客户,每个客户对应一些特定的订单;再例如公司和员工,每个公司对应一些特定的员工,每个员工对应一特定的公司 [UML图] (图1.3) (4)聚合(Aggregation) [聚合] 当对象A被加入到对象B中,成为对象B的组成部分时,对象B和对象A之间为聚集关系。聚合是关联关系的一种,是较强的关联关系,强调的是整体与部分之间的关系。 [具体表现] 与关联关系一样,聚合关系也是通过实例变量来实现这样关系的。关联关系和聚合关系来语

浅谈对的理解对象—关系型数据库

浅谈对对象—关系型数据库的理解 姓名:杨小敏 学号:2010206190026

针对对象—关系型数据库的理解我想结合自己的专业(地图学与地理信息系统)从下面三个方面来理解:(1)关系型数据的发展以及在空间数据管理方面的优缺点(2)面向对象数据库的发展及在空间数据管理方面的优缺点(3)关系型数据库和面向对象技术的融合在数据库发展中所起到的独特作用在我们GIS专业领域内,随着信息技术的发展,各种应用系统建设的不断深入,像现在面向21世纪的应急应用系统的建设、城市基础地理空间信息数据库系统与共享平台的建设、地理信息公共服务平台的建设,小到“数字城市”的建设,大到“数字地球”乃至“智慧地球”的建设,我们已经开始不满足数值和文字的信息处理,为了达到系统建设平台尤其是公共服务平台的建设起到良好的客户友好体验,大量的图形信息,音频信息已经深入到数据库的设计中,其中尤其是空间数据库管理备受瞩目。所以,面对信息爆炸的21世纪,海量数据的存储和管路已经不是传统的数据库能解决的,空间数据管理需要更强的数据库——对象关系型数据库。 为什么空间数据需要对象关系型数据库的管理才更有效?我想简单的说一下GIS空间数据的基本特征:(1)空间特征:每个空间对象都具有空间坐标,所以在存储空间数据的同时我们要考虑数据的空间分布特征;(2)非结构化特征:通用数据库或者是传统数据库数据记录一般是结构化的,在面对空间图形信息的时候难以直接采用关系数据管理系统;(3)空间关系特征:空间数据的空间关系最重要的就是空间拓扑关系,这种拓扑结构方便了空间数据的查询和空间分析,但是给空间数据的一致性和完整性的维护增加了复杂性;(4)海量数据的特征:数据库在面对海量数据的存储和组织时,一般在二维空间上划分块或图幅,在垂直的方向上划分层在组织海量空间数据。 在空间数据的管理技术的发展中,从手工管理管理阶段到文件管理阶段再到数据库管理阶段,在三个数据管理阶段,对数据管理方式也不尽相同,在这里,我想说的是空间数据库的发展历史对空间数据管理的影响,第一是层次关系型数据库:只是数据库发展的初级阶段,这是空间数据的管理大多用文件方式管理,很显然不适合管理海量的空间数据,所以淘汰;第二是网络关系型数据库:在一定程度上解决了空间数据复杂管理的难题,但还是被日益崛起的关系型数据库所淘汰;第三是关系型数据库的发展:为了解决难于保证数据的完整性,开始将空

对象关系模型数据库解析

面向对象数据库系统(Object Oriented Data Base System,简称OODBS)是数据库技术与面向对象程序设计方法相结合的产物。 对于OO数据模型和面向对象数据库系统的研究主要体现在:研究以关系数据库和SQL为基础的扩展关系模型;以面向对象的程序设计语言为基础,研究持久的程序设计语言,支持OO模型;建立新的面向对象数据库系统,支持OO数据模型。 面向对象程序设计方法是一种支持模块化设计和软件重用的实际可行的编程方法。它把程序设计的主要活动集中在建立对象和对象之间的联系(或通信)上,从而完成所需要的计算。一个面向对象的程序就是相互联系(或通信)的对象集合。面向对象程序设计的基本思想是封装和可扩展性。 面向对象数据库系统支持面向对象数据模型(以下简称OO模型)。即面向对象数据库系统是一个持久的、可共享的对象库的存储和管理者;而一个对象库是由一个OO模型所定义的对象的集合体。 一个OO模型是用面向对象观点来描述现实世界实体(对象)的逻辑组织、对象间限制、联系等的模型。一系列面向对象核心概念构成了OO模型的基础。概括起来,OO模型的核心概念有如下一些: (1)对象(Object)与对象标识OID(Object IDentifier) 现实世界的任一实体都被统一地模型化为一个对象,每个对象有一个唯一的标识,称为对象标识(OID)。 (2)封装(Encapsulation) 每一个对象是其状态与行为的封装,其中状态是该对象一系列属性(Attribute)值的集合,而行为是在对象状态上操作的集合,操作也称为方法(Method)。 (3)类(C1ass) 共享同样属性和方法集的所有对象构成了一个对象类(简称类),一个对象是某一类的一个实例(instance)。 (4)类层次(结构) 在一个面向对象数据库模式中,可以定义一个类(如C1)的子类(如C2),类Cl 称为类C2的超类(或父类)。子类(如C2)还可以再定义子类(如C3)。这样,面向对象数据库模式的一组类形成一个有限的层次结构,称为类层次。 (5)消息(Message) 由于对象是封装的,对象与外部的通信一般只能通过显式的消息传递,即消息从外部传送给对象,存取和调用对象中的属性和方法,在内部执行所要求的操作,操作的结果仍以消息的形式返回。 OODB语言用于描述面向对象数据库模式,说明并操纵类定义与对象实例。OODB语言主要包括对象定义语言(ODL)和对象操纵语言(OML),对象操纵语言中一个重要子集是对象查询语言(OQL)。OODB语言一般应具备下述功能: (1)类的定义与操纵 面向对象数据库语言可以操纵类,包括定义、生成、存取、修改与撤销类。其中类的定义包括定义类的属性、操作特征、继承性与约束等。 (2)操作/方法的定义 面向对象数据库语言可用于对象操作/方法的定义与实现。在操作实现中,语言的命令

类与类之间的关系及代码表现

类与类之间的关系对于理解面向对象具有很重要的作用,以前在面试的时候也经常被问到这个问题,在这里我就介绍一下。 类与类之间存在以下关系: (1)泛化(Generalization) (2)关联(Association) (3)依赖(Dependency) (4)聚合(Aggregation) UML图与应用代码例子: 1.泛化(Generalization) [泛化] 表示类与类之间的继承关系,接口与接口之间的继承关系,或类对接口的实现关系。一般化的关系是从子类指向父类的,与继承或实现的方法相反。 [具体表现] 父类父类实例=new 子类() [UML图](图1.1) 图1.1Animal类与Tiger类,Dog类的泛化关系 [代码表现] 1.class Animal{} 2.class Tiger extends Animal{} 3.public class Test 4.{ 5. public void test() 6. { 7. Animal a=new Tiger(); 8. } 9.} 2.依赖(Dependency) [依赖] 对于两个相对独立的对象,当一个对象负责构造另一个对象的实例,或者依赖另一个对象的服务时,这两个对象之间主要体现为依赖关系。 [具体表现]

依赖关系表现在局部变量,方法的参数,以及对静态方法的调用 [现实例子] 比如说你要去拧螺丝,你是不是要借助(也就是依赖)螺丝刀(Screwdriver)来帮助你完成拧螺丝(screw)的工作 [UML表现](图1.2) 图1.2 Person类与Screwdriver类的依赖关系 [代码表现] 1.public class Person{ 2. /** 拧螺丝 */ 3. public void screw(Screwdriver screwdriver){ 4. screwdriver.screw(); 5. } 6.} 3.关联(Association) [关联] 对于两个相对独立的对象,当一个对象的实例与另一个对象的一些特定实例存在固定的对应关系时,这两个对象之间为关联关系。 [具体表现] 关联关系是使用实例变量来实现 [现实例子] 比如客户和订单,每个订单对应特定的客户,每个客户对应一些特定的订单;再例如公司和员工,每个公司对应一些特定的员工,每个员工对应一特定的公司 [UML图] (图1.3) 图1.3 公司和员工的关联关系 [代码表现] 1.public class Company{ 2. private Employee employee;

数据库系统概论试题及答案1234

一、单选题(每题2分,共20分) 1、在数据库系统的三级模式结构中,用来描述数据的全局逻辑结构的是() (1)子模式 (2)用户模式(3)模式(4)存储模式 2、在下列实体类型的联系中,一对多联系的是(2) (1)学校与课程的学习联系 (2)父亲与孩子的父子关系 (3)省与省会的关系(4)顾客与商品的购买关系 3、在关系模型中,实现关系中不允许出现相同的元组的约束是通过(2) (1)侯选键 (2)主键(3)外键 (4)超键 4、下列哪种运算不属于关系代数的基本运算(1) (1)连接 (2)笛卡尔积 (3) 相减 (4) 投影 5、在SQL中,可以用谓词EXISTS来测试一个集合中是否(4) (1)有相同元组存在 (2)为空集合(3) 有相同分量存在 (4) 为非空集合 6、设有关系r如图所示,则该关系最高为哪一级范式(3) A B C D (1) 1NF (2)2NF (3)3NF (4)BCNF A1 b1 c1 d2 A1 b2 c2 d4 A2 b1 c2 d1 A1 b3 c1 d4 7、设已经F={C->A,CG->D,CG->B,CE->A,ACD->B},从中去掉哪些函数依赖关系后得到的新的函数依赖集合F1与F等价的是(4) (1)C->A和CG->B (2) C->A 和ACD->B (3)CE->A 和ACD->B (4)CE->A和CG->B 8、ER图是一种直观表示何种模型的工具(3) (1)结构数据模型(2)关系数据模型 (3) 概念数据模型 (4)层次和网状模型 9、约束”年龄限制在18—30岁之间”属于DBMS的哪种功能(2) (1)安全性(2)完整性(3)并发控制(4)恢复 10、在对象联系图中,双线箭头表示对象间的(3) (1)函数值为多值 (2)属性值为多值 (3)泛化/细化联系(4)对象之间包含联系 二、判断题(每题2分,共10分) 1、对一个客观事物,可以用多种数据模型来描述(对) 2、设R、S是任意两个同类关系,U是R的关系框架中所有属性的集合,属性集A 3、数据库事务的原子性是指事物在执行过程中不能出现

类图之间的关系

在UML 2.0的13种图形中,类图是使用频率最高的UML图之一。Martin Fowler在其著作《UML Distilled: A Brief Guide to the Standard Object Modeling Language, Third Edition》(《UML 精粹:标准对象建模语言简明指南(第3版)》)中有这么一段:“If someone were to come up to you in a dark alley and say, 'Psst, wanna see a UML diagram?' that diagram would probably be a class diagram. The majority of UML diagrams I see are class diagrams.”(“如果有人在黑暗的小巷中向你走来并对你说:‘嘿,想不想看一张UML图?’那么这张图很有可能就是一张类图,我所见过的大部分的UML图都是类图”),由此可见类图的重要性。 类图用于描述系统中所包含的类以及它们之间的相互关系,帮助人们简化对系统的理解,它是系统分析和设计阶段的重要产物,也是系统编码和测试的重要模型依据。 1. 类 类(Class)封装了数据和行为,是面向对象的重要组成部分,它是具有相同属性、操作、关系的对象集合的总称。在系统中,每个类都具有一定的职责,职责指的是类要完成什么样的功能,要承担什么样的义务。一个类可以有多种职责,设计得好的类一般只有一种职责。在定义类的时候,将类的职责分解成为类的属性和操作(即方法)。类的属性即类的数据职责,类的操作即类的行为职责。设计类是面向对象设计中最重要的组成部分,也是最复杂和最耗时的部分。 在软件系统运行时,类将被实例化成对象(Object),对象对应于某个具体的事物,是类的实例(Instance)。 类图(Class Diagram)使用出现在系统中的不同类来描述系统的静态结构,它用来描述不同的类以及它们之间的关系。 在系统分析与设计阶段,类通常可以分为三种,分别是实体类(Entity Class)、控制类(Control Class)和边界类(Boundary Class),下面对这三种类加以简要说明: (1) 实体类:实体类对应系统需求中的每个实体,它们通常需要保存在永久存储体中,一般使用数据库表或文件来记录,实体类既包括存储和传递数据的类,还包括操作数据的类。实体类来源于需求说明中的名词,如学生、商品等。 (2) 控制类:控制类用于体现应用程序的执行逻辑,提供相应的业务操作,将控制类抽象出来可以降低界面和数据库之间的耦合度。控制类一般是由动宾结构的短语(动词+名词)转化来的名词,如增加商品对应有一个商品增加类,注册对应有一个用户注册类等 (3) 边界类:边界类用于对外部用户与系统之间的交互对象进行抽象,主要包括界面类,如对话框、窗口、菜单等。 在面向对象分析和设计的初级阶段,通常首先识别出实体类,绘制初始类图,此时的类图也可称为领域模型,包括实体类及其它们之间的相互关系。 2. 类的UML图示 在UML中,类使用包含类名、属性和操作且带有分隔线的长方形来表示,如定义一个Employee 类,它包含属性name、age和email,以及操作modifyInfo(),在UML类图中该类如图1所示:

数据库选择题

答案见《数据库选择题填空题答案.doc》 一、选择题 1. 在一个二维表中,行称为________,列称为________。 A) 属性;元组 B) 元组;属性 C) 关系;元组 D) 属性;关系 2. 数据库系统的核心是________。 A) 数据库管理系统 B) 数据库 C) 数据 D) 数据库应用系统 3. VFP是一种________数据库管理系统。 A) 层次型 B) 网状型 C) 关系型 D) 树型 4. 支持数据库各种操作的软件系统是________。 A) 数据库系统 B) 操作系统 C) 数据库管理系统 D) 命令系统 5. 在关系模型中,从表中选出满足条件的记录的操作称为________。 A) 连接 B) 投影 C) 联系 D) 选择 6. 数据库系统与文件系统的主要区别是________。 A) 文件系统只能管理程序文件,而数据库系统可以管理各种类型的文件 B) 文件系统管理的数据较少,而数据库系统能管理大量数据 C) 文件系统比较简单,数据库系统比较复杂 D) 文件系统没有解决数据冗余和数据独立性问题,而数据库系统解决了这些问题 7. 在关系运算中,选择的操作对象是________;投影的操作对象是________;连接的操作对象是________。 A) 一个表;一个表;两个表 B) 一个表;两个表;两个表 C) 一个表;一个表;一个表 D) 两个表;一个表;两个表 8. 在关系数据库中,基本的关系运算有三种,它们是________。 A) 选择、投影和统计 B) 选择、投影和连接 C) 排序、索引和选择 D) 统计、查找和连接 9. VFP是一种关系型数据库管理系统,所谓关系是指________。 A) 表中各个记录之间的联系 B) 数据模型满足一定条件的二维表格式 C) 表中各个字段之间的联系 D) 一个表与另一个表之间的联系 10. 一个仓库里可以存放多个部件,一种部件可以存放于多个仓库,仓库与部件之间是________的联系。 A) 一对一 B) 多对一 C) 一对多 D) 多对多 11. 自然连接要求被连接的两关系有若干相同的________。 A) 实体名 B) 属性名 C) 主关键字 D) 主属性名

关系数据库系统

数据库管理系统是数据库系统的核心 数据库系统是在文件系统的基础上发展而来的 数据库最大的特点是“数据的三级抽象和二级独立” 数据库是存储在计算机内有结构的数据集合 数据库应用系统包括数据库和数据库应用程序 关系数据库系统: 是支持关系模型的数据库系统 数据模型的三要素是: 数据结构、数据操作和数据完整性 关系模型的组成 1. 关系数据结构 2. 关系操作集合 3. 关系完整性约束 关系模型中常用的关系操作: 选择、投影、并、差、笛卡尔积是5种基本操作 关系操作的特点: 集合操作方式,即操作的对象和结果都是集合 关系代数 是一种抽象的查询语言 用对关系的运算来表达查询 关系代数运算的三个要素 运算对象:关系 运算结果:关系 运算符:四类关系代数运算符 关系运算的分类:分为传统的集合运算和专门的关系运算

SQL的功能特点 数据查询 数据定义(DDL) 数据操纵(DML) 数据控制(DCL) 约束条件类型 ?PRIMARY KEY(主键约束) ?UNIQUE(惟一约束) ?NOT NULL(非空约束) ?FOREIGN KEY(外键约束) ?CHECK(检查约束) 建立索引的目的:基本表上建立一个或多个索引,以提供多种存取路径,加快查找速度。 数据库异常问题 1.冗余太大 2.插入异常 3.删除异常 4.修改异常 数据依赖:是一个关系内部属性与属性之间的一种约束关系,是语义的体现。分为函数依赖和多值依赖。 泛关系模式:就是最初设计的关系模式,或者说是存在异常问题的关系模式。

数据库模式:根据范式理论,将不符合用户需求的泛关系模式分解成一系列的关系集合。 若R∈1NF,且R中的每一个非主属性都完全函数依赖于R的任一候选码,则R∈2NF。 ?如果关系模式R∈BCNF,必定有R∈3NF ?如果R∈3NF,且R只有一个候选码,则R必属于BCNF。 任何的二元关系必定是BCNF ?查询优化:从查询的多个执行策略中进行合 理选择的过程。 ?查询优化的分类:代数优化和物理优化 数据保护也叫数据控制,主要包括: ●数据库恢复 ●并发控制 ●数据的安全性 ●数据的完整性 事务(Transaction) 是用户定义的一个数据库操作序列,这些操作要么全做,要么全不做,是一个不可分割的工作单位。 ?事务可以是一组SQL语句、一条SQL语句或整个程序,在通常 情况下,一个应用程序里包含多个事务。 ?事务生成: ?用户显式地定义事务

类与类之间的关系

类与类之间的关系对于理解面向对象具有很重要的作用,下面进行总结! 一、类与类之间存在以下关系: ` UML图与应用代码例子: 1.泛化(Generalization) [泛化] 表示类与类之间的继承关系,接口与接口之间的继承关系,或类对接口的实现关系。一般化的关系是从子类指向父类的,与继承或实现的方法相反。 [简单理解] 是一个is a 的关系。如老虎是一个动物 [具体表现] 父类父类实例=new 子类() [UML图](图1.1) 图1.1 Animal类与Tiger类,Dog类的泛化关系 [代码表现] 1. class Animal{ 2. 3. } 4. class Tiger extends Animal { 5. 6. } 7. public class Test 8. { 9. public void test() 10. { 11. Animal a=new Tiger(); 12. } 13. }

2.依赖(Dependency) [依赖] 对于两个相对独立的对象,当一个对象负责构造另一个对象的实例,或者依赖另一个对象的服务时,这两个对象之间主要体现为依赖关系。 [具体表现] 依赖关系表现在局部变量,方法的参数,以及对静态方法的调用 [简单理解] 一个类使用了另外一个类作为局部变量和方法参数。是一个use a关系! [现实例子] 比如说你要去拧螺丝,你是不是要借助(也就是依赖)螺丝刀(Screwdriver)来帮助你完成拧螺丝(screw)的工作 [UML表现](图1.2) 有时在uml图中不出现箭头只是虚线 图1.2 Person类与Screwdriver类的依赖关系 理解: 指Person类可能要用到Screwdriver的一些方法,也可以这样说,要完成Person里的所有功能,一定要有Screwdriver的方法协助才行。Person依赖于Screwdriver的定义。 ROSE对依赖关系不产生属性。 注意,要避免双向依赖。一般来说,不应该存在双向依赖 [代码表现] 1. public class Person 2. { 3. /** 拧螺丝 */ 4. public void screw(Screwdriver screwdriver) 5. { 6. screwdriver.screw(); 7. } 8. }

对象关系在模型中的实现案例

对象关系在模型中的实现案例 —基础软件部吴春云一、案例介绍: 在一个项目中,存在多个业务对象,各个业务对象间存在各种关系。从结构上来看,对象关系可以分为依赖、继承、关联、聚合、组合,从数量上来看,对象关系可以分为一对一、一对多、多对多。本案例主要介绍如何在开发中通过代码来表示对象间的各种关系,并基于这种关系进行前后端数据交互及持久化。 二、关系的概念及实现: 1.结构关系 1.1继承 继承指的是一个类(称为子类、子接口)继承另外的一个类(称为父类、父接口)的功能,并可以增加它自己的新功能的能力。所以继承关系,确切的说是类与类之间的关系,但是对象又是类的实例,所以就这个角度理解为对象之间的关系,例如父与子的关系,动物与狗的关系,汽车与大众的关系等。 工作流结构部分的实体类:SysNode(环节)、SysTransactNode (办理环节)、SysActivityNode(活动环节)、SysDecisionNode(决策环节)应用了这种继承关系,使得子类拥有了父类环节中的属性,但子类本身代码大大简化,结构清晰。 public class SysTransactNode extends SysNode{}

public class SysActivityNode extends SysTransactNode{} public class SysDecisionNode extends SysTransactNode{} 1.2依赖 依赖就是一个对象A使用到了另一个对象B,而这种使用关系是具有偶然性的、临时性的、非常弱的,但是对象B的变化会影响到对象A。比如某人要过河,需要借用一条船,此时某人与一条船之间的关系就是依赖。表现在代码层面,一般指由局部变量、返回值建立的对于其他对象的调用关系,如对象B作为参数被对象A在某个方法中使用。 1.3关联 关联体现的是两个类之间语义级别的一种强依赖关系,这种关系比依赖更强、不存在依赖关系的偶然性、关系也不是临时性的,一般是长期性的,而且双方的关系一般是平等的。关联可以是单向、双向的。表现在代码层面,为被关联类B以类的属性形式出现在关联类A中,也可能是关联类A引用了一个类型为被关联类B的全局变量。 1.4聚合 聚合是关联关系的一种特例,它体现的是整体与部分的关系,即has-a的关系。此时整体与部分之间是可分离的,它们可以具有各自的生命周期,部分可以属于多个整体对象,为多个整体对象共享,比如计算机与CPU、公司与员工的关系等。表现在代码层面,和关联关系是一致的,只能从语义级别来区分。 1.5组合 组合也是关联关系的一种特例,它体现的是一种contains-a的

王珊《数据库系统概论》课后习题(对象关系数据库系统)【圣才出品】

第15章对象关系数据库系统 1.定义并解释OO模型中以下核心概念:对象与对象标识、封装、类、类层次。 答:(1)对象 是由一组数据结构和在这组数据结构上的操作的程序代码封装起来的基本单位。对象通常与实际领域的实体对应。一个对象包括属性集合和方法集合。 (2)对象标识OID 面向对象数据库中的每个对象都有一个唯一的不变的标识称为对象标识(OID)。对象标识具有永久持久性,即一个对象一经产生系统就会赋于一个在全系统中唯一的对象标识符,直到它被删除。 (3)封装 每一个对象是其状态与行为的封装,其中状态是该对象一系列属性值的集合,而行为是在对象状态上操作的集合,操作也称为方法。 (4)类 共享同样属性和方法集的所有对象构成了一个对象类简称类。 (5)类层次 在一个面向对象数据库模式中,可以定义一个类(如C1)的子类(如C2),类C1称为类C2的超类(或父类)。子类(如C2)还可以再定义子类(如C3)。这样,面向对象数据库模式的一组类形成了一个有限的层次结构,称为类层次。 2.OO模型中对象标识与关系模型中的“码”有什么区别?

答:对象标识具有永久持久性。一个对象一经产生,系统就给它赋予一个在全系统中惟一的对象标识符,直到它被删除。对象标识是由系统统一分配的,用户不能对对象标识符进行修改。对象标识是稳定的,独立于值的,它不会因为对象中某个值的修改而改变。 关系模型中的“码”是值标识,不具有永久持久性,只具有程序内持久性。码是由用户建立的,用来区分关系的不同元组。 3.什么是单继承?什么是多重继承?继承性有什么优点? 答:(1)单继承是指一个子类只能继承一个超类的特性(包括属性、方法和消息);多重继承是指一个子类能继承多个超类的特性。 (2)继承性的优点有以下两点: ①它是建模的有力工具,提供了对现实世界简明而精确的描述; ②它提供了信息重用机制。子类可以继承超类的特性,可以避免许多重复定义。

十四对象间关系模型的实现

十四.对象间关系模型的实现 C++语言支持对象模型中的的包容与继承(派生)关系,但对关联关系没有专用的语法支持。 ⒈包容关系 ①不透明包容 例: #include class A { int i; public: A(){i=0;} A(int x):i(x){} int operator!(){return i;} }; class B { int j; A *p; public: B(int x):j(x){p=new A[x];} int operator!(){return j;} void operator~(){for(int i=0;i

例:向对象单向链表中插入已有的对象 #include class A { int i; A *next; public: A(int x,A* s=NULL):i(x),next(s){} A* GetNext(){return next;} void SetNext(A* s){next=s;} int operator!(){return i;} }; class B { int j; A *p; public: B(int x,A* s=NULL):j(x),p(s){} void Insert(A* s) { if(!p)p=s; else { A* temp=p; while(temp->GetNext())temp=temp->GetNext(); temp->SetNext(s); } } int operator!(){return j;} void operator~() { A* temp=p; while(temp) {

对象关系模型数据库

对象数据库关系数据库 我们将对象数据库管理系统()定义为一个集成了数据库能力与面向对象编程语言能力地数据库管理系统(),使数据库对象看起来像是已有地一个或多个程序设计语言中地程序设计语言以象.——,委员会主席. 在多用户客户机服务器环境中提供了持久性存储器.可以处理对象地并行访问,提供锁定和事务保护,保护对象存储器免遭各种类型地威胁,照管像备份和恢复之类传统任务.这所以与关系数据库不同,是因为存储地是对象,而不是表格.对象地引用通过持久性标识()进行,可以独一无二地识别各个对象,可以用来在对象之间建立标记和容器关系.还加强了封装,支持继承.结合了对象属性和传统地功能,如锁定、保护、事务处理、查询、版式本、并发和持久性.文档来自于网络搜索 不是利用分离地语言(如)定义、检索和处理数据,而是利用类定义和传统地面向对象地程序语言(通常是、和语言)构造来定义和访问数据.只来过是存储器内语言数据结构地多用户、持久性扩展.换句话说,客户就是或是程序,服务器就是——没有像和这样地可视中间对象.将数据库能力直接集成进语言.文档来自于网络搜索 地价值.很显然,最好是以自然地形式存储那些对象,而不是将数据修饰得光光滑滑或撕得七零八落之后放进关系表格中.文档来自于网络搜索 对于那些数据复杂难以在表格里简单排列地用户来说,特别适合.曾经长期是学者和研究人员极为感兴趣地领域.最早地商品化出现在年,是公司(现在地公司)和公司推出地.后来(九十年代)()、、、、、、和等公司也加入了这个开拓行列.这些厂商首先瞄准了那些复杂数据结构和长命期事务处理地应用程序——包括计算机辅助设计、和智能办公室等.随着多媒体、群件、公布式对象和万维网技术地出现,与那些深奥难懂地特性现在变成了客户机服务器系统地主流要求.技术填补关系数据库最弱地那些空隙——复杂数据、版式本和长生命期事务、持久性对象存储、继承和用户定义地数据类型等等.文档来自于网络搜索 以下是厂商开拓地各个特性: 自由创建新地信息类型 快速存取 组合结构地灵活视图 与面向对象地程序语言紧密集成 利用多继承支持可定制地信息结构 支持版本事务、嵌套事务和长生命期事务 分布式对象储库 支持复合对象地生命期管理 对象狂已经掌握了整个行业.面向对象技术支持者正在宣告,对象关系数据库和将成为医治关系技术地所谓弱点地良药.这纯属胡说……在数据库上直接地和不加区分地就应用面向对象技术,将再次引入关系数据库花了二十年才克服地那些问题.文档来自于网络搜索 在用户中间,很少有人会怀疑最终将成为地后继技术.在诗人地比喻中,年轻地革命上帝已经开始衰老,变成冷冰冰地暴君——戒律和标准地守护人.文档来自于网络搜索 我们可以两者兼得.要点是将这两项技术结合起来,而不是相互扔泥块.对二十多处踏踏实实地关系数据库研究地开发熟视无睹,不加以利用,就不太应该了.文档来自于网络搜索 和都承认目前地数据库实现有缺点;但他们两人都有觉得关系模型本身能够处理将解决地那些问题,有能力,可以利用嵌套关系、域(或用户定义地数据封装类型)以及一种比更强大地面向集合语言在关系技术世界里近似.这些特性完成这项工作,无需追逐对象指针或操纵低级地专用语言记录结构.没有必要减轻关系理论地联合能力.开发者没有必要退回到用手工方法去最佳化或重新优化应用程序地性能——将时钟倒拔回去了.认为域和对象是同一回

对象的继承关系在数据库中的实现方式和PowerDesigner设计 - 深蓝 - 博客园

对象的继承关系在数据库中的实现方式和PowerDesigner设计 在面向对象的编程中,使用对象的继承是一个非常普遍的做法,但是在关系数据库管理系统RDBMS中,使用的是外键表示实体(表)之间的关系,那么对于继承关系,该怎么在RDBMS中表示呢?一般来说有3种实现方式: Concrete Table Inheritance(具体表继承) Single Table Inheritance(单表继承) Class Table Inheritance(类表继承) 比如在一个教务系统中,有老师学生2个对象,这两个对象都是“人”对象的子类,所以我们可以建立一个Person表,该表有人的公共属性:姓名、性别等,还有就是数据的唯一标识,一个ID。而教师对象有教师的特有属性,比如职称,学生有学生的特有属性,比如学号。所以我们可以建立Person、Teacher、Student3个表,其关系在PowerDesigner中如图所示: 1.具体表继承。 不建立父对象,将父对象的所有属性转移到子对象中,为每个子对象建立对于的表。如果使用这种方法,那么就只需要建立Teacher表和Student表,不需要Person表,在PowerDesigner中,双击继承节点,打开属性窗口,取消“Generate Parent”选项,选 中“Generate children”并选择“Inherit all attributes”,如图所示: 生成的数据库表将如图所示:

2.单表继承。 在一个宽表中列出所有父对象和子对象的属性,同时用一个标识列表示该行数据存储的是哪个子类的数据。在PowerDesigner中,修改继承节点的属性,取消“Generate children”,选中“Generate parent”,然后在下面添加一个标识列,叫PersonType,如图所示: 生成的数据库表,在一个宽表中表示如图所示: 可以看到Person中的列集成了Person、Teacher、Student这3个表的所有列,同时还多了一个列PersonType,这个列就是用来区分这行数据到底表示的是一个学生还是一个老师。 3.类表继承。 对父对象和每个子对象建立一个对应的表,然后在子表中设置该子表的主键为与父表关联的外键。在PowerDesigner中,对于继承节点的属性,允许生成父和子表,另外,将“Inherit only primary attributes”选中。如图所示:

关系数据库系统习题

关系数据库管理系统练习题 一、单选题 1. 由数据库管理系统、数据库、计算机软硬件和人员构成的一个整体称 D 数据库 系统 2、对于二维表的关键字来说,不一定存在的是 A 外部关键字 3、在数据库中,数据的正确性、合理性及相容性(一致性)称为数据的( D 完整性 4、VFP“文件”菜单中的“关闭”命令是用来关闭() C 当前活动窗口 5、日期型、逻辑型、备注型和通用性这四种字段的宽度是固定的,系统分别规定为( )个字节 C 8、1、4、4 6、VFP中,若需要修改表中的数据,必须先执行()命令 D USE 7、打开一张表,表中有10条记录,分别用函数EOF()和BOF()测试,其中结果一 定是() B .F.和.F. 8、当执行命令:USE TEACHER ALIAS JS IN B 后,被打开表的别名是 () B JS 9、打开一个表后,执行下列命令: GO 6 SKIP –5 GO 5 C 记录指针只向第五条记录 10、要从数据库中真正删除某些记录,应该D 先用DELETE,再用PACK 11、下列叙述中含有错误的是(b) A一个数据库表只能设置一个主索引 B 唯一索引不允许索引表达式有重复值 C 候选索引既可以用于数据库表也可以用于自由表 D候选索引不允许索引表达式有重复值 12、设计数据库时,可使用纽带表来表示表之间的()C 永久关系 13、创建数据库后,系统自动生成三个文件的扩展名为()D .DBC .DCT .DCX 14、库表字段默认值是保存在()A 表文件中 15、要想控制用户在浏览窗口或者是表单中输入数据时采用一定的格式,应该设置( ) B 字段的输入掩码 16、表的长表名在命令中指定时,用()子句指定长表名 B NAME 17、“查询”文件的扩展名为()C QPR 18、查询文件中保存的是()A 查询的命令 19、下列说法中错误的是( d ) A视图是数据库的一个组成部分 B视图中的源数据表也称为“基表” C视图设计器只比查询设计器多一个“更新条件”选择卡 D远程视图使用VFP的SQL语法从VFP视图或表中选择信息

相关主题