搜档网
当前位置:搜档网 › Test report A type_IEC60934测试报告

Test report A type_IEC60934测试报告

Test report A type_IEC60934测试报告
Test report A type_IEC60934测试报告

EMC test report

WBS QM EMC test report 1/24

1Document Change Record 2/24

Table of Contents (1) 1DOCUMENT CHANGE RECORD (2) 2DOCUMENT REFERENCES (4) 2.1A PPLICABLE D OCUMENTS (4) 2.2R EFERENCED D OCUMENTS (4) 3INTRODUCTION (5) 4EIT-01 (POWER) (6) 5EIT-02 (DATA/HK INTERFACE) (7) 6EIT-03 (ZERO & COMB) (9) 7OPT-03 (ATTENUATOR STEP SIZES) (11) 8PET-01 (COMB ANALYSIS) (12) 9CS ON POWER LINES / COMMON AND DIFFERENTIAL MODE (13) 10CS ON SIGNAL LINES / COMMON MODE (15) 11CS TRANSIENTS ON POWER LINES (16) 11.1C OMMON MODE (16) 11.2D IFFERENTIAL MODE (18) 12RS WITH E-FIELD (20) 13RS WITH H-FIELD (23) 14SUMMARY OF TEST RESULTS (24) 3/24

2Document References 2.1Applicable Documents 2.2Referenced Documents 4/24

连接器群组测试报告connectortestreport

连接器群组测试报告 c o n n e c t o r t e s t r e p o r t Document serial number【NL89WT-NY98YT-NC8CB-NNUUT-NUT108】

DESCRIPTION:产品说明 CONNECTOR 高度连接器 PART NO.: 料号 DATE: 日期 2012/12/28 DOCUMENT NO.: 文件号码 REV.: 版本 A INDEX 索引 1.SCOPE 3 适用范围 2.APPLICABLE DOCUMENTS 3 适用的文件 3.TEST CONDITIONS AND SEQUENCE 3 5 测试条件与次序

4.TEST METHOD OF INSPECTION 5 10 测试检验方法 5.SUMMARY OF THE QUALIFICATION 11 27 TEST RESULT 测试结果 6. APPENDIX 28 附件 1. SCOPE 适用范围 1.1TESTED SAMPLES: 85 pcs. 测试样品数: 85个 1.2PURPOSE This qualification test report contains the quality requirements, test procedures and test results of a qualification test program on the part no: 目的 这个合格检验报告针对泰强料号: 进行测试,测试内容包含合格测 验规范、测验程序和测验的结果 2.APPLICABLE DOCUMENTS 适用的文件 2.1EIA-RS-364 2.2Test report of FCN: 3. TEST CONDITIONS AND SEQUENCE 测试条件与次序 3.1TEST CONDITIONS Unless otherwise specified, tests and examinations were conducted under conditions within the following ranges: Temperature: 20±5℃ Atmospheric Pressure: 650 to 800 millimeters to inches) of Mercury

抗老化测试报告TEST REPORT

TEST REPORT NO:DECAI20170710 Date:AUG 10,2017 Page:1of 3 CUSTOMER NAME: DECAI PLASTIC TECHNOLOGY CO;LTD.DONGGUAN ADDRESS: NO.75.LIANYAN STREET YANWU VILLAGE DALINGSHAN TOWN DONGGUAN CITY CHINA The following sample(s) was/were submitted and identified on behalf of the client as: Sample Name : UV MATERIAL Ref.No. : 20170701 Sample Information : RESISTANCE TO UV Date of Receipt : Aug 01,2017 Testing Start Date : Aug 01,2017 Testing End Date : Aug 09,2017 Test result(s) : For further details,please refer to the following page(s) Signed for DECAI Standards Technical Center

TEST REPORT NO: DECAI20170710 Date: AUG 06,2017 Page: 2of 3 Note: Pass:Meet the requirements; Fail:Does not meet the requirements; /:Not Apply to the judgment. Original Sample Photo:

SOFTWARE TEST REPORT (STR)

SOFTWARE TEST REPORT (STR) Contents 1 Scope 1.1 Identification 1.2 System overview 1.3 Document overview 2. Referenced documents 3. Overview of test results 3.1 Overall assessment of the software tested 3.2 Impact of test environment 3.3 Recommended improvements 4. Detailed test results 4.x (Project-unique identifier of a test) 4.x.1 Summary of test results 4.X.2 Problems encountered 4.x.2.y (Project-unique identifier of a test case) 4.x.3 Deviations from test cases/procedures 4.x.3.y (Project-unique identifier of a test case) 5. Test log 6. Notes A. Annexes

Software Test Report (STR) I - Scope. This clause should be divided into the following subclauses. 1.1 Identification. This subclause shall contain a full identification of the system and the software to which this document applies, including, as applicable, identification number(s), title(s), abbreviations, version number(s), and release number(s). 1.2 System overview. This subclause shall briefly state the purpose of the system and the software to which this document applies. It shall describe the general nature of the system and software; summarize the history of system development, operation, and maintenance; identify the project sponsor, acquirer, user, developer, and maintenance organizations; identify current and planned operating sites; and list other relevant documents. 1.3 Document overview. This subclause shall summarize the purpose and contents of this document and shall describe any security or privacy protection considerations associated with its use. 2. Referenced documents. This clause shall list the number, title, revision, date, and source of all documents referenced in this 3. Overview of test results. This clause should be divided into the following subclauses to provide an overview of test results. 3.1 Overall assessment of the software tested. This subclause shall: a. Provide an overall assessment of the software as demonstrated by the test results in this report b. Identify any remaining deficiencies, limitations, or constraints that were detected by the testing performed. Problem/change reports may be used to provide deficiency information. c. For each remaining deficiency, limitation, or constraint, describe: 1 )Its impact on software and system performance, including identification of requirements not met 2) The impact on software and system design to correct it 3) A recommended solution/approach for correcting it 3.2 Impact of test environment. This subclause shall provide an assessment of the manner in which the test environment may be different from the operational environment and the effect of this difference on the test results. 3.3 Recommended improvements. This subclause shall provide any recommended improvements in the design, operation, or recommended improvements are provided, this subclause shall state "None." 4. Detailed test results. This clause should be divided into the following subclauses to describe the detailed results for each test. Note: The word "test' means a related collection of test cases. 4.x (Protect-unique identifier of a test). This subclause shall identify a test by project- unique identifier and should be divided into the following to describe the test results. 4.x. I Summary of test results. This subclause shall summarize the results of the test. The summary shall include, possibly in a table, the completion status of each test case associated with the test (for example, 'all results as expected,' "problems encountered," "deviations required'). When the completion status is not 'as expected,' this subclause shall reference the following subclauses for details. 4.x.2 Problems encountered. This subclause should be divided into subclauses that identify each test case in which one or more problems occurred. 4.x.2.y (Protect-unique identifier of a test case). This subclause shall identify by project- unique identifier a test case in which one or more problems occurred, and shall provide:

TEST REPORT 检验报告

No.: SHF101A1279 TEST REPORT 检验报告 Name of Sample: 样品名称: 糖足宝(袜子) Applicant: 委托单位:美国+ MD 2929N Main N.Logan. Utah https://www.sodocs.net/doc/a99895244.html,A Test Purpose: 检验类别: ENTRUST TEST 委托检验 Intertek Testing Services Ltd., Shanghai 6/F., No. 2 Building, Shanghai Comalong Industrial Park, No. 889 Yishan Road, Shanghai, 200233, China. 上海天祥质量技术服务有限公司 中国上海市宜山路889号齐来工业城2号楼6层西侧邮政编码: 200233 Tel: 0086-21-61206565,Fax: 0086-21-64954500

TEST REPORT REPORT No.: SHF101A1279 PREPARED AND CHECKED BY: AUTHORIZED BY: FOR INTERTEK TESTING SERVICES FOR INTERTEK TESTING SERVICES LTD., SHANGHAI LTD., SHANGHAI RICHARD CHAI JOHN WANG FOOD LAB MANAGER FOOD DIVISION MANAGER Page 1 of 3 NAME OF SAMPLE 产品名称 糖足宝(袜子) TEST PURPOSE 检验类别 ENTRUST TEST SPECIFICATION 型号、规格、等级 / TRADEMARK 商标 / CLIENT 委托单位 美国+ MD MANUFACTURER 生产单位 / DATE SAMPLE RECEIVED 委托样品收到日期 Jun. 09, 2010 2010年06月09日 SAMPLE QUANTITY 样品数量 1 piece PRODUCTION DATE 生产日期 / CODE / NUMBER 批号或编号 / TESTING STANDARD 检验依据或判定标准 ASTM E 2149-01-2001 TESTING PERIOD 检验日期 Jun. 09, 2010 TO Jun. 14, 2010 2010年 06月09日至 2010年06月14日 TESTING CONTENT 检验内容 CIRCUMSTANCES ARE IN THE REPORT ATTACHMENT. 详见检验报告附页。 CONCLUSION 检验结论 SUPPLY REAL MEASURING DATA 提供实测数据 CIRCUMSTANCES ARE IN THE REPORT ATTACHMENT 详见检验报告附页 签发日期2010年06月 14日 REMARK 备注 THE TESTING RESULTS ARE ONLY VALID FOR THE SAMPLE TESTED. 检测结果仅对来样负责。 *********************************************************************** TO BE CONTINUED

TEST REPORT TEMPLATE - FEP_QN (REV03)

DATE: OCT 31, 2014PAGE 1 OF 7 SECTION 1 FEP/QN TEST MATRIX Material Types 8 HE Nickel (Ni)#Aluminum (Al) Copper (Cu) Cobalt (Co) Organic Tin as Tin (Sn) Coatings √√√√√√Wood / Metal / Glass / Ceramics √√/ / / / General materials √√/ / / √Liquid & Sticky materials √√/ / / √Dry, Brittle and Powder like materials √√/ / / √ NOTE: 1 √= Applicable; / = Not applicable 2 # Total Nickel (Ni) content requirement also applies to non-small parts SECTION 2 FEP/QN TEST REPORT TEMPLATE CONCLUSION: TEST SAMPLES TEST STANDARD RESULT {To be filled in by lab} SRS-018 PASS / FAIL EN 71-3:2013 (Selected Heavy Elements) PASS / INCONCLUSIVE / FAIL Directive 2009/48/EC, Appendix A, total Nickel (Ni) content in accessible materials PASS / FAIL SRS-046 Phthalates PASS / FAIL Diisobutyl phthalate (DiBP) content PASS / SEE RESULT LABORATORIES SHALL REVISE THE LIMITS BELOW FOR OTHER MATERIAL CATEGORIES

TEST REPORT

D R A F T The content of this PDF file is accordance with the original issued reports for reference only.此PDF 電子檔內容根據原簽發之紙本報告製作,僅供參考用。 Unless otherwise stated the results shown in this test report refer only to the sample(s)tested.This test report cannot be reproduced,except in full,without prior written permission of the Company.除非另有說明,此報告結果僅對測試之樣品負責。本報告未經本公司書面許可,不可部份複製。 This Test Report is issued by the Company under its General Conditions of Service which is available on request or accessible at https://www.sodocs.net/doc/a99895244.html,/terms_and_conditions.htm.Attention is drawn to the limitation of liability,indemnification and jurisdiction issues defined therein.Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions,if any.The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents.Any unauthorized alteration,forgery or falsification of the content or appearance of this document is unlawful and offenders Mechanical &Hardgoods Lab Report No :HY/2009/70221Page :1of 6Date :2009/10/08 REMO,Inc.(c /o REMO Asia Inc.) 28101Industry Drive, Valencia,California 91355,USA The following merchandise was submitted &identified by the applicant as:Type of Product:Style/Item No:Manufacturer/Vendor:Country of Origin:Lollipop-Drum,6-8-10"OD ET-7106&7108&7110-00REMO China China,P.R.Sample Receiving Date:Testing Period:2009/01/14&2009/07/092009/01/15–02/26&2009/07/10–10/07 We have tested the submitted sample(s)as requested and the following results were obtained:Test Requested For compliance with lead in paint/similar surface coating material,lead in accessible substrate materials and phthalates content in US Public Law 110-314(HR 4040‘Consumer Product Safety Improvement Act of 2008’). Test Results -Please refer to next page(s).Results summary Test item Result Lead in paint /similar surface coating material PASS Lead in accessible substrate materials PASS Phthalates PASS Overall Conclusion The submitted samples comply with the requested test requirements. *This report is combined with report of HY/2009/10283* Signed for and on behalf of SGS Taiwan Ltd. Iris Huang Supervisor

测试报告(HD-SPI-VER-TestReport-SystemTest)V1.0

物联网生产指挥系统 系统测试报告 XXXX有限公司 未经允许,文档内容不可全部或部分发表、复制、使用于任何目的。

目录 1.引言 (1) 1.1.编写目的 (1) 1.2.项目背景 (1) 1.3.定义规约 (1) 1.4.参考资料 (2) 2.测试概要 (2) 2.1.进度回顾 (2) 2.2.测试用例 (2) 2.3.测试方法 (2) 2.4.测试环境 (3) 3.测试结果 (3) 3.1.需求覆盖率 (3) 3.2.缺陷汇总 (4) 3.3.缺陷分析 (6) 3.4.遗留缺陷 (6) 4.测试结论与建议 (6) 4.1.测试结论 (6) 4.2.典型缺陷引入原因分析 (7) 4.3.测试建议 (7)

1.引言 1.1.编写目的 本测试报告为XXXX系统二期的系统分析报告,目的在于总结测试以及分析测试结果,描述系统是否符合需求。 预期人员包括测试人员、开发人员、项目主管、其他质量管理人员和需要阅读本报告的项目经理。 1.2.项目背景 1.3.定义规约 Bug严重性:分为致命、严重、一般、较小 Bug优先级:分为特急、加急、高、中、低、无 Bug出现频率:分为总是、有时、随机、没有试验、无法重现 致命bug:当系统无响应,处于死机状态,需要其他人工修复才可复原,点击某个菜单显示“页面不能够显示”或者返回异常错误或不能进行正常操作,影响用户正常使用的功能。 严重bug:出现页面功能点使用有误、有较大的功能缺陷的现象。 一般bug:页面中的非重点功能的操作问题,普通、较轻、界面及不影响使用的的功能缺陷。 较小bug:建议或意见。

1.4.参考资料 2.测试概要 2.1.进度回顾 2.2.测试用例 2.3.测试方法 主要采用黑盒测试方法。 测试系统对于所有功能点是否实现,正常及异常流程和数据是否正确,主要针对功能需求,主要关心功能是否实现。具体测试方法如下: 1.执行测试用例; 2.为随机测试中发现的问题补充测试用例; 3.进行回归测试。

中英文Test Report1

Test Report 测试报告 Page 1 of 3 Report No.报告编号RLSZC000466440001 第1页,共3页Applicant SHENZHEN FENGCAI PAINT SCIENCE & TECHNOLOGY CO.,LTD 申请人:深圳丰彩油墨科技有限公司 Address 3TH INDUSTRLAL AREA SHA JING BAOAN,SHENZHEN CHINA 地址:中国深圳宝安沙井第三工业区 Report on the submitted sample(s) said to be 报告提供样品 Sample Name INK 样品名称:油墨 Sample Description Blue-gray ink 样品简述蓝灰色油墨 Part No.部分编号:011,012,014,024,025,032,038,041,043,044,048,051,052,T-3,T-7,T-186,XT-300 Sample Received Date 样品接收日期2010年3月4号 Testing Period测试期:2010年3月4日—3月10日 Test Requested As specified by client, to determine the Fluorine(F), Chlorine(CI), Bromine(Br), Iodine(I) content in the submitted sample. 测试要求:由委托人指定,确定提交的样品中含有氟(F), 氯(CI), 溴(Br), 碘(I) 等要素 Test Method Test Result(s) Please refer to the following page(s). 测试结果请参阅以下页 Tested by测试员Inspected by 检验员 Approved by批准人Date日期 No. 56657036

EN 50564 Test report

Test Report standby and off mode , and network standby, electric power consumption of networked equipment Product under test Brand name as identified on product Netgear Model identification FVS336G v3 Version or serial number ‐‐ Product description Dual WAN Gigabit SSL VPN Firewall Regulatory reference EC Commission Regulation No. 1275/2008 and No. 801/2013 Name of applicant NETGEAR, Inc. Address of applicant 350 East Plumeria Drive, San Jose, California 95134, USA Name of test laboratory Sporton International Inc. Address of test laboratory 14 Fl ‐2, No. 186, Jianyi Road, Zhonghe District, New Taipei City, Taiwan Test report number X431514C024 Test date 2014‐05‐01 Prepared by Mindy Tsai Approved by Hans Hsieh Test results Availability to deactivate the wireless network connection N/A, no wireless network function. Availability of power management No. Default period of power management N/A Network port(s) providing power management function N/A

相关主题