合同中英文

CANADA SK AND MB FOOD GROUP INCORATED

加拿大和兆食品集团股份有限公司

Job Offer of Employment

工作就业

Liqing wang:

CANADA SK AND MB FOOD GROUP INCORATED

加拿大和兆食品集团股份有限公司

is pleased to offer you employment in the capacity of a packer subject to approval by the British Columbia Provincial Nominee Program.

很高兴提供你就业的能力，封隔器经英属哥伦比亚省提名计划。

The Duties of Your Position Will be:

你的职务地位将：

Load and unload materials and products

装卸材料和产品

Sort materials and products

这类材料及产品

Move materials and products

提出的材料和产品

Clean the workplace

清洁的工作场所

Label and receive products

标签和得到的产品

WORK SCHEDULE

工作时间表

1. THE EMPLOYEE shall work 40 hours per week with overtime as per provincial labor standards

1。雇员每周工作40小时加班费按省劳动标准

2.THE EMPLOYEE shall receive 50% more than the regular wages for any hours worked over this limit.

2.the员工将得到50%以上的任何时间工作的正常工资超过这个极限。

WAGES AND DEDUCTIONS

工资扣除

3.THE EMPLOYER agrees to pay THE EMPLOYEE,for his/her work,wages of $16.00per hour.Wages shall be paid at intervals of 14 days.

雇主同意支付员工，对他/她的工作，工资16.00per美元小时。工资应当每隔14天。

4.THE EMPLOYER AGREES TO PAY ALL TAXES AND SUBMIT ALL DEDUCTIONS PAYABLE AS PRESCRIBED BY LAW (INCLUDING,but not limited to employ,ent insurance ,income tax,Cannada Pension plan or Quebec pension Plan)

4.the雇主同意支付税款和提交所有应付扣除由法律规定（包括，但不限于雇用，耳鼻喉科保险，所得税，加拿大养老金计划或魁北克养老金计划）

WORKPLACE SAFETY INSURANCE(Worker's Compensation)

工作场所安全保险（工人赔偿）

THE EMPLOYER agrees to register THE EMPLOYEE under the relevant provincial govemment insurance plan.THE EMPLOYER agrees not to deduct money from the EMPLOYEE'S wages for

this purpose.

雇主同意登记的雇员在有关省级政府保险plan.the雇主同意不从雇员工资里扣钱用于这一目的。

NOTICE OF REGISTRA TION

预告登记

Should he wish to terminate this employment,THE EMPLOYEE agrees to give THE EMPLOYER written notice thereof at least 2 weeks in advance.

他希望终止该雇佣，员工同意给予书面通知雇主至少提前2周。

NOTICE OF TERMINA TION OF EMPLOYMENT

雇员终止服务通知书

THE EMPLOYER must give written notice before terminating the employment of THE EMPLOYEE if this individual has completed 3 months of uninterrupted service with THE EMPLOYER. This notice must be provided at least 2 weeks in advance.

雇主必须以书面通知终止雇用员工如果这个人完成了3个月的不间断服务的雇主。这个通知必须提供至少提前2周。

CONTRACT SUBJECT TO PROVINCIAL LABOUR AND EMPLOYMENT LEGISLATION AND

合同受省劳动就业立法

APPLICABLE COLLECTIVE AGREEMENTS

适用的集体协议

THE EMPLOYER is obliged to abide by the standards set out in the relevant provincial labor standards act and,if applicable,the terms of any collective agreement in place.

雇主有义务遵守的标准中规定的相关省级劳动标准法和，如果适用，规定任何集体协议的地方。

In particular,THE EMPLOYER MUST ABIDE BY THE STANDARDS WITH RESPECT TO HOW WAGES ARE PAID, HOW OVERTIME IS CALCULATED,MEAL PERIODS,STATUTORY HOLIDAYS,ANNUAL LEAVE,FAMIL Y LEA VE,BENEFITS AND RESOURCE UNDER THE TERMS OF THE ACT AND, IF RELEVANT,COLLECTIVE AGREEMENT.

特别是，雇主必须遵守标准是关于工资如何支付，如何计算加班，用餐时间，法定假日，年假，产假，利益和资源的条款下的行为，如果有关，集体协议。

Any terms of the contract of employment less favorable to THE EMPLOYEE than the standards stipulated in the relevant labor standards act is null and void.

任何合同条款，就业不利于员工比标准的相关规定的劳动标准法案无效。

On behalf of CANADA SK AND MB FOOD GROUP INCORPORATED

代表加拿大队和兆食品集团股份有限公司

ACCEPTED BY:

接受的：

DA TE:

日期：

模具开发合同范本,中英文版

Ope n Mould Con tract Contract No.: Date: PartyA 甲方： PratyB: 乙方： 经过友好协商和在公平、平等的原则基础上，双方约定如下： After friendly consultations and proceeding on principles of fairness and equality, the Parties have agreed the followi ng: 开模费用/ Open mould fee . 二、模具开发周期及要求/ Work Day & Requirement 1) 模具的开发周期/ Mould Work Day 首件样件完成时间/Time of finishing first product of mold :从接到订单到首件样品完成需要30天/ 30 days from build ing time ARO (after receipt of order) to first POM (product of mold) sample pour; 2) 模具验收/ Mould Inspection: 模具必须符合买方的技术要求。The product shall completely fit the tech ni cal requireme nts. 3) 由于模具的开发周期和质量问题造成甲方项目延期，乙方将赔偿甲方的一切损失。If the PartyA project delayed due to the work day and the quality of the mould the PartyB should compe nsate the PartyA or all the losses. 三、模具的维护/Mold Maintenance 正常使用寿命内的模具在生产过程中发生的损坏或磨损，相关的维修及保养等都由乙方负责。If the mould is with in the no rmal work ing life but damaged or worn duri ng the product ion process, the Party B should be resp on sible for the related repair and maintenance. 四、开模费用的支付/ Open mould Payment Terms 在铸件得到甲方确认后1年之内100%电汇。

英文版外贸合同(中英文对照版)

外贸合同 Contract( sales confirmation) 合同编号(Contract No.): _______________ 签订日期(Date) :＿＿＿＿＿＿＿＿＿＿_ 签订地点(Signed at) :＿＿＿＿＿＿＿____ 买方：＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿The Buyer:＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿ 地址：＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿Address: ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿电话(Tel):___＿＿＿＿＿＿＿＿传真(Fax):＿＿＿＿＿＿＿＿＿＿ 电子邮箱(E-mail):＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿ 卖方：＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿The Seller:＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿地址：＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿Address: ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿_＿电话(Tel):_＿＿＿＿＿＿＿＿传真(Fax):＿＿＿＿＿＿＿＿＿＿＿ 电子邮箱(E-mail):＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿

买卖双方同意按照下列条款签订本合同： The Seller and the Buyer agree to conclude this Contract subject to the terms and conditions stated below: 1. 货物名称、规格和质量（Name, Specifications and Quality of Commodity）： 2. 数量（Quantity）： 允许＿＿＿＿的溢短装（＿＿＿% more or less allowed） 3. 单价（Unit Price）： 4. 总值（Total Amount）： 5. 交货条件(Terms of Delivery) FOB/CFR/CIF＿＿＿＿＿＿＿ 6. 原产地国与制造商(Country of Origin and Manufacturers): 7. 包装及标准（Packing）： 货物应具有防潮、防锈蚀、防震并适合于远洋运输的包装，由于货物包装不良而造成的货物残损、灭失应由卖方负责。卖方应在每个包装箱上用不褪色的颜色标明尺码、包装箱号码、毛重、净重及“此端向上”、“防潮”、“小心轻放”等标记。 The packing of the goods shall be preventive from dampness, rust, moisture, erosion and shock, and shall be suitable for ocean transportation/ multiple transportation. The Seller shall be liable for any damage and loss of the goods attributable to the inadequate or improper packing. The measurement, gross weight, net weight and the cautions such as "Do not stack up side down", "Keep away from moisture", "Handle with care" shall be stenciled on the surface of each package with fadeless pigment. 8. 唛头（Shipping Marks）： 9. 装运期限（Time of Shipment）：

贸易出口合同中英文版一

合同编号：YT-FS-6596-70 贸易出口合同中英文版一 Clarify Each Clause Under The Cooperation Framework, And Formulate It According To The Agreement Reached By The Parties Through Consensus, Which Is Legally Binding On The Parties. 互惠互利共同繁荣 Mutual Benefit And Common Prosperity

贸易出口合同中英文版一 备注：该合同书文本主要阐明合作框架下每个条款，并根据当事人一致协商达成协议，同时也明确各方的权利和义务，对当事人具有法律约束力而制定。文档可根据实际情况进行修改和使用。 合同编号：_____ Contract No：_____ 签订日期：_____ Date：____签订地点：_____ Signed at ： _____电话：____ Tel： ____传真：____ Fax：_____电报：____ Cable： ____电传：____ Telex： ____电话：____ Tel： ____传真：____ Fax：_____电报：_____ Cable：____电传：_____ Telex： ____经买双方确认根据下列条款订立本合同：The undersigned Sellers and Buyers have confirmed this contract in accordance with the terms and conditions stipulated below ： 1. 货号Art No. 名称及规格Descriptions 单位Unit 数量Quantity 单价Unit Price 金额Amount 合计：_____ Totally：____总值(大写)：_____ Total value：(in words)

国际技术咨询服务合同 (中英文)

国际技术咨询服务合同（中英文） Technical Consultancy Service Contract 合同号：Contract No________________ 签订日期：Date of Signature:________________ 签订地点：Place of Signature:________________ 中国____________公司（以下简称委托方）为一方，______国______________ 公 司（以下简称为咨询方）为另一方，双方就_____________的技术咨询服务，授权双方代表按下列条款签订本合同。 This Contract is made and entered into through friendly negotiation by and between China____________________ (hereina fter referred to as “Client”), as one party, and____________________ (hereinafter referred to as“Consultant”),as the other party, concerning the technical consultancy service of__________, under the following terms and conditions: 第一条合同内容 Article 1 Contents of Technical Consultancy Service 1.1 委托方希望获得咨询方就_____提供的技术咨询服务，而咨询方愿意提供此项服务。 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services. 1.2 技术咨询服务范围详见本合同附件一。 The Scope of Technical Services is defined in Appendix 1. 1.3 技术咨询服务的进度安排详见本合同附件二。 The Time Schedule for the Services is shown in Appendix 2. 1.4 技术咨询服务的人员安排见本合同附件三。 The Manning Schedule is described in Appendix 3. 1.5 技术咨询服务自合同生效之日起_____个月内完成，将在_____个月内提交最终技术咨询报告，包括图纸、设计资料、各类规范和图片等。咨询方应免费通报委托方类似工程的最近发展和任何进展，以便委托方能改进该工程的设计。 Consultant shall complete the Services within__________months from the Effective Date of this Contract and furnish the final technical service report, including drawings, designing documents, all kinds of standards and photos, within____months. Consultant shall keep aware, free of charge, Client of the latest development of similar projects and any progress made in order to improve the designing of the project.

软件开发合同英文版

编号：_____________软件开发合同 Party A：_________________________ Party B：_________________________ 签订日期：_______年______月______日

Entrusting Party (Party A): Entrusted Party (Party B): Date： Sign at: Validity: Printed by Ministry of Science and Technology of the People’s Republic of China Instruction The contract is a sample for Technology Development Contract printed by Ministry of Science and Technology of the People’s Republic of China. The technical contract registry organs can recommend the sample to the parties concerned in technology contracts for reference. 1.The contract is applied for the technology development contracts in which one party entrusts the other party to research and develop new technologies，products， crafts， materials or new varieties and series. 2.If there are several representatives in either party， Party A or Party B could be respectively listed as common entrusting party or common entrusted party in the “Entrusting Party” or “Entrusted Party” provisions（new page）according to their own relations in the contract. 3. Any conditions not stipulated here will be listed in the appendix in accordance with to the parties’ negotiations. And the appendix forms an indispensable part of this contract. 4.As for the terms and conditions no need to be filled in this contract agreed upon by the parties， they should be indicated with the word such as N/A.

租赁合同(中英文版)

租赁合同 LEASE CONTRACT 出租方：（以下简称甲方）： Lessor (hereinafter referred to as Party A): 承租方：（以下简称乙方）： Tenant (hereinafter referred to as Party B): 甲、乙双方经过友好协商一致订立本合同，以资共同遵守。 Party A and Party B ,having had friendly discussion,hereby agree to enter into the following contract to be abided by both parties. 一、物业地址： 甲方将其所有的位于上海市的房屋及附属设施在良好状态下出租给乙方使用。 Address of Building: Party A shall lease the house of its own and its accessory facilities which is in good condition and located at District,Shanghai to Party B for . 二、房屋面积： 出租房屋的建筑面积为平方米。 Floorage of house: The construction floorage of the house to let is spuare meters. 三、租赁期限： 租赁期自年月日起至年月日止为期年个月。 甲方应于年月日以前将房屋腾空交给乙方使用。 Lease Terms: The lease term shall be from (mouth) (day) (year),to (month) (day) (year).And Party A should vacate the house and turn it over to Party B for use before (month) (day) (year). 四、定金 1、乙方应付的定金为元整，乙方于年月日以前支付给甲方定金共计元整。 2、在本合同签定之后至租期开始之前如甲方违约，则上述定金由甲方双倍返还乙方，如乙方违约则定金由甲方没收。定金的赔偿不影响违约金的索赔。 3、租期开始之后，上述定金全额自动转化为：。 Earnest Money: 1、Party B will pay as an earnest money.The earnest money should be paid to Party A before (month) (day) (year). 2、After the contract is signed and before the lease term begins, in case Party A breaches the

出口合同中英文版

编号：_______________本资料为word版本，可以直接编辑和打印，感谢您的下载 出口合同中英文版 甲方：___________________ 乙方：___________________ 日期：___________________

地址：地址： 电话：电话： 卖方与买方在平等、互利基础上，经双方协商一致同意按下列条款履行，并严格信守。第一条货物名称、规格、包装及暖头: 第二条卖方有权在3%以内多装或少装。 The Seller shall have the right in 3% more or less. 第三条装运期限：年月底前交货。 Time of shipment：in by the end of the delivery. 第四条装运口岸： Port of shipment： 第五条目的口岸： Port of destination：

第六条付款条件：按样品验收合格之日起60日内付清。 Terms of payment:60 days after the acceptance. 第七条装运条件：海运。 Terms of shipment：Land of qualified payment. 第八条包装和数量：出口纸箱包装。 Packing and quantity：export carton packaging. 第九条不可抗力：由于不可抗力使卖方不能在本合同规定期限内交货或者不能交货，卖方不负责任。但卖方必须立即电报通知买方。如果买方提出要求，卖方应以挂号向买方提供由有关机构出具的事故的证明文件。 Force Majeure：due to force majeuret so the seller can not within the time stipulated in the contract delivery or non-delivery of the goods> The Seller shall not be responsible for. But shall notify the Buyers by cable. If requested by the buyer? the seller should be registered toThe buyer by the relevant authorities of the accident issued documents. 第十条因执行本合同有关事项所发生的一切争执，应由双方通过友好方式协商解决。如果不能取得协议时，则在被告国家根据被告国家仲裁机构的仲裁程序规则进行仲裁。 仲裁决定是终局的，对双方具有同等的约束力，仲裁费用除非仲裁机构另有决定外，均 由败诉一方负担。 As a result of the implementation of matters related to the contract that all

技术合同英文范本(2020版)

(合同范本) 姓 名：____________________ 单 位：____________________ 日 期：____________________ 编号： YW-HT-050018 技术合同英文范本(2020版) English model of technical contract

技术合同英文范本(2020版) 技术合同英文范文篇一 甲方：party a ： 乙方：party b ： 合同编号： contract no 日期：date ： 签约地点：signed at ： 特约定： 甲方基于下文所列各种因素，特与乙方达成了协议并一致同意：由甲方在订约日期之翌日起_____天之内为乙方建造并完成_____(涉约建筑)。涉约建筑之规模及所需的钢筋、水泥、砖块、石子和其它建筑材料之数量，均在作为合同附件的设计图和施工细则中予以说明。 witnesses that the party a for considerations hereinafter named, contracts

and agrees with the party b that party a will, within_____ days, next following the date hereof, build and finish a libarary building for party b. ( the building hereinafter is referred to as the said building.) the said building is of the following dimensions, with reinforced concrete, brick, stones and other materials, as are described in plans and specifications gereto annexed. 基于上述情况，乙方及其法定代表郑重承诺向甲方支付人民币_____元整。支付方法商定如下： in consideration of the foregoing, party b shall, for itself and its legal representatives, promise to pay party a the sum of one million rmb yuan in manner as follows, to wit： 在上述工程开工之日，支付人民币_____元整 在_____年_____月_____日，支付人民币_____元整 甲方：party a：乙方：party b： 合同编号：contract no 日期：date： 签约地点：signed at： 技术合同英文范文篇二 合同contract 日期：合同号码： date: contract no.: 买方：(the ;buyers) 卖方：(the sellers) 兹经买卖双方同意按照以下条款由买方购进，卖方售出以下商品： this contract is made by and between the buyers and the sellers; whereby

中英文 市场开发合作协议

市场开发合作协议 Market Development Agreement 甲方：XXXX TECHNOLOGIES HK LIMITED（以下简称甲方） Party A: Xxxx Technologies (Hereinafter referred to as Party A) 乙方：XXXX Technologies（以下简称乙方） Party A: XXXX Technologies (Hereinafter referred to as Party B) 为了发挥甲乙双方各自的优势，本着“互利双赢”的精神及公平公正的原则，经双方友好协商，就共同合作、开发印度市场达成以下协议： In order to give full play to the respective advantages of Party A and Party B, in the spirit of “mutual benefit and win-win” and the principle of fairness and fairness, through friendly negotiations between both parties, the following agreement was reached on joint cooperation and development of the Indian market: 一、协议主体 Agreement

经甲方授权，乙方可用甲方市场拓展部的名义，在不违反国家相关法律法规的前提下，联系开发印度市场。 With the authorization of Party A, Party B can use the name of the Market Development Department of Party A without prejudice to the relevant national laws and regulations to develop the Indian market. 二、业务范围 Business Scope 1、展会 Exhibition 2、杂志 Magazine 3、社交媒体 Social Media 三、甲方责任 Party A responsibility 1、向乙方提供公司形象宣传、产品介绍及价格表等相关资料。 Provide Party B with company image promotion, product introduction, price list and other related materials.

采购合同(中英文版)

PURCHASE ORDER 采购合同 合同编号( Contract No.)：日期(Date)： 卖方(Seller)： 地址(Address): 电话(Tel)：传真(Fax)：电子邮箱(E-mail)： 买方(Buyer)： 地址(Address): 电话(Tel)：传真(Fax)： 邮箱(E-mail)： The undersigned seller and buyer have agreed to close the following transactions according to the terms and conditions set forth as below: 买卖双方经协商同意按下列条款成交： https://www.sodocs.net/doc/c2332427.html,modity, Quantity and Price: 1.1. The contract price will be calculated based on the actual shipping quantity. 结算总金额以实际发货数量计算。 1.2. The packing list should indicate the weight of a balk and the quantity of bales. 装箱单应表明规格，每包重量，数量和装箱的总重量。 1.3 As seller's parking list indicated. 以卖方的装箱单为准. 2. Shipment 装运: 2.1 The seller is responsible to load products into the container. 卖方负责装入集装箱内。

英文版外贸合同(中英文对照版)

International Sales Contract 合同编号: C0110 (Contract No.): C0110 签订日期:2013年11月3日 (Date) : November 3th , 2013 签订地点: 中国上海水星家纺有限公司大楼 (Signed at) : Shuixing Home Textiles limited company Building,Shanghai,China 买方：美国纽约家得宝股份有限公司 The Buyer: Home Depot Incorporated, NewYork, America 电话(Tel): 01188745608002 卖方：中国上海水星家纺有限公司 The Seller:Shuixing Home Textiles limited company, Shanghai,China 电话(Tel): 86-021-******** 买卖双方同意按照下列条款签订本合同： The Seller and the Buyer agree to conclude this Contract subject to the terms and conditions stated below: 1.货物名称、规格和质量: （Name, Specifications and Quality of Commodity）： (1)货物名称：水星鸭绒被 Name of Commodity:Shuixing eiderdown quilt (2)产品描述（Product description）: Ⅰ.规格（Specifications）:248×248 cm Ⅱ.填充：90%白鸭绒和其他毛类填充物 Fillers:90%white duck down and some other feather filling Ⅲ.重量(Weight):1500 g Ⅳ.面料：80支漂白全棉仿绒贡缎(抗菌仿绒处理) Plus material:80s bleach cotton anti-cashmere satin (Antibacterial

技术开发委托合同中英文对照

Technology Development Contract 技术开发（委托）合同 Contract No.: P-1309-33 Date:2013-11-08 Entrusting Party （Party A）: 委托方（甲方）： Address: 地址： Tel: Fax: Entrusted Party （Party B）: 受托方（乙方）： Address: 地址: Tel: Fax: Party A entrust Party B to research and develop Technique Proposal Of Smart T/R Verification System. Party B will develop key circuits verification for the Solution and will be in charge of general thought plan.The following articles are reached and abided by the both parties. 甲方委托乙方设计智能收发验证系统技术方案，乙方将设计开发方案的验证电路及负责整体思路的建立，为此订立以下协议，并由双方共同恪守。 Article 1 Definitions 第一条定义

1.1 "Technique Proposal Of Smart T/R Verification System (hereinafter referred to as “the Solution ”)" shall mean all the required techniques to construct the general idea which will commit the attached technical requirements. The Solution shall include all technical details of all designing schemes and experimental verification for key circuits. 智能收发验证系统技术方案(以下简称“方案” )，是指设计满足附件要求的总体技术方案，所需要的解决方案。该解决方案包括全部设计方案资料及关键电路验证技术资料。 1.2"Technical documentations" shall mean all the necessary documents to design the Solution and all the verification documents that Party B will use in designing the Solution. 技术资料，指研发解决方案所必需的资料，包含乙方在设计方案的过程中，所使用的全部有关验证技术资料。 1.3 “R&D ”shall mean research and development. “R&D ”，是指研究和开发。 1.4 ”T/R ”shall mean transmit and receive. T/R ”，是指发射和接收。 1.5 ” Soc ” shall mean system on chip. “SOC ” ,是指系统级芯片。

(完整word版)外贸合同中英文版

SALES AND PURCHASE CONTRACT Granular Sulphur in Bulk DRAFT CONTRACT NUMBER: 100901 Offer subject to Seller’s final review, confirmation and approval. This agreement made and entered into on September 2, 2010 by and between: Seller: E-MAIL: ………………………………………. Phone: ____________________________ Hereinaf ter called the “Seller” and Herein Buyer: Address: Tel: E-mail:__________________________ Hereinafter called the “Buyer” and Whereas:Seller and Buyer, each with full corporate authority, certifies, represents and warrants that each can fulfill the requirements of this agreement and respectively provides the products and the funds referred to herein, on time and under the terms agreed to hereafter.

对外贸易出口合同中英文预付款版

合同 CONTRACT Contract No./合同编号： Conclusion Date/签订日期： Conclusion Place/签订地点： The Saller卖方： Address:地址： Tel/电话： Fax/传真： The Buyer买方： Address:地址： Tel/电话： Fax/传真： 1. This Contract is made by a nd between the Buyer a nd the Seller; whereby the Buyer agrees to buy a nd the Seller agrees to sell the under mentioned commodities （to be referred to as “goods” hereunder）to the terms a nd conditions stipulated below: 本合同由卖方与买方共同签订，双方同意按照下列条款由卖方出售、买方购进下列货物: 2．Terms of Delivery/价格术语: FOB/CIF/CFR/ . The term FOB/CIF/CFR/ shall be subject to the International Rules for the Interpretation of Trade Terms (INCOTERMS, 2000) provided by International Chamber of Commerce (ICC) unless otherwise stipulated herein. 除非本合同另有规定，价格术语FOB/CIF/CFR/ 应适用国际商会制定的《国际贸易术语解释通则（INCOTERMS 2000）》。 3． Country of Origin a nd Manufacturers/原产国和制造厂商 3.1 Country of Origin:

技术合同英文范本(完整版)

合同编号：YT-FS-1908-76 技术合同英文范本(完整 版) Clarify Each Clause Under The Cooperation Framework, And Formulate It According To The Agreement Reached By The Parties Through Consensus, Which Is Legally Binding On The Parties. 互惠互利共同繁荣 Mutual Benefit And Common Prosperity

技术合同英文范本(完整版) 备注：该合同书文本主要阐明合作框架下每个条款，并根据当事人一致协商达成协议，同时也明确各方的权利和义务，对当事人具有法律约束力而制定。文档可根据实际情况进行修改和使用。 合同 contract 日期：合同号码： date: contract no.: 买方： (the ;buyers) 卖方： (the sellers) 兹经买卖双方同意按照以下条款由买方购进，卖方售出以下商品： this contract is made by and between the buyers and the sellers; whereby the buyers agree to buy and the sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter: (1) 商品名称: name of commodity： (2) 数量：

产品研发合同英文版

GENERAL CONTRACT BETWEEN AND UNIVERSITY OF ALBERTA OF THE PACKER RUBBER FOR STAGED FRACTURING TOOL Introduction Accompanying with the fast growing of fracturing operation in petroleum industry in China, the usage of the staged fracturing tools will be expanded markedly. By the invitation of Prof. Gu, University of Alberta (shall mean the Party B) will help Poly-Doctor Petroleum Technology Co. Ltd. Beijing (shall mean the Party A) to develop a packer rubber for staged fracturing tool. The site of the packer rubber manufacturing plant is selected in Alberta. (More information please is noticed in the attachment of the Proposal of the packer rubber production line for staged fracturing tool in Alberta, Canada. Internal Order No: UAlberta-2012-11) Parties in this Contract Entrusting Party (Party A): Entrusted Party (Party B): University of Alberta 116 St, 85 Ave Edmonton, AB

出口合同中英文

售货合同 SALES CONTRACT 合同编号(Contract No.)： 签约时间(Signing Date)： 签约地点(Signing Place)：卖方(The Seller)： 地址(Address)： 电话(Tel)：传真(Fax)： 买方(The Buyer)： 地址(Address)： 电话(Tel)：传真(Fax)： 卖方与买方经协商同意签订本合同，按如下条款由买方购进卖方售出以下商品：The Seller agrees to sell and The Buyer agrees to buy the under-mentioned goods on terms and conditions as stipulated below: Note: overweight or underweight within % of the total contract weight shall be permitted. 本合同使用的FOB， CFR，CIF等术语，除另有规定外，均遵行国际商会2000年制订的《国际贸易术语解释通则》。 The terms FOB, CFR, CIF etc. in the Contract shall subject to INCOTERMS 2000 provided by the International Chamber of Commerce unless otherwise stipulated herein. 2．包装（Packing）: 3．装运唛头（Shipping Mark）: 4．保险（Insurance）: 方应按发票金额的110%投保险。附加险包括：。