测试项目一览表(英文)

实验室测试项目一览表

Test item of laboratory

1.高温贮存High temperature storage

2.低温贮存Low temperature storage

3.高温负荷High temperature loading

4.低温负荷Low temperature loading

5.冷启动Cold start

6.热启动Hot start

7.温度循环Temperature cycling

8.耐湿热负荷Loading under damp heat

9.耐湿热贮存Damp heat storage

10.冷热冲击Thermal shock

11.贮存温湿度循环Non-operating temp and RH cycling

12.负荷温湿度，电压组合循环Operating temp and RH and

voltage cycling

13.盐雾Saline mist test

14.抗氧化Resistance to Oxidization

15.跌落Drop test

16.振动Vibration test

17.倾跌与翻滚Drop and topple

18.耐热Resistance to heat

19.耐燃Resistance to fire

20.针焰测试Needle flame

21.耐漏电起痕Proof tracking index

22.电气强度Electric strength

23.绝缘电阻Insulation resistance

24.接地电阻Earth resistance

25.泄漏电流Leakage current

26.寿命测试Life test

27.加速寿命测试Accelerated Life Test

28.M TBF实证MTBF Demonstration

29.应力测试Stress Test

30.R oHS test

英文投稿添加作者信件

Dear Editor, Thanks very much for your kind work and consideration on publication of our manuscript entitled "论文标题" (ID ；论文编号). On behalf of my co-authors, we would like to express our great appreciation to editor and reviewers. Moreover, although this is a serious problem because the manuscript is already accepted for publication, we are wishing to add Dr. 新增作者名字as an extra author to the manuscript and the new title page is sent as an attachment. 新增作者名字is a new member of my group and contributed much in the revised version of our manuscript. After we received the referee's comments, he/she did a great job for the expansion of literature review so as to provide a deeper insight into the related published work and hence establish the contribution of this paper with respect to other publications tackling the problem. He/She also recalculated all the noise coefficients with a precision of four digits after the decimal point, as listed in Table II, Table III, Table IV and Table VII. Without her hard work, we could not finish the revised version in several days. However, when I changed the authors' list, I forgot to add her as the fifth author. Would you please to give us a chance to add Qin Gao as a new author to the paper If you give us this chance, we will be grateful. Best wishes, Yours sincerely, XXXXX

英文投稿过程中的十种状态

以下是英文投稿过程中的十种状态: 1. Submitted to Journal 当上传结束后，显示的状态是Submitted to Journal，这个状态是自然形成的无需处理。 2. With editor 如果在投稿的时候没有要求选择编辑，就先到主编那里，主编会分派给别的编辑。这当中就会有另两个状态： ① Editor assigned编辑分派 ② Editor Declined Invitation编辑拒绝邀请，这时主编不得不将投稿文章重新分派给其它编辑。 3. Reviewer(s) invited 说明编辑已接手处理，正在邀请审稿人中。有时该过程会持续很长时间，如果其中原因是编辑一直没有找到合适的审稿人，这时投稿者可以向编辑推荐审稿人。 4. Under review 审稿人的意见已上传，说明审稿人已接受审稿，正在审稿中，这应该是一个漫长的等待（期刊通常会限定审稿人审稿时间，一般为一个月左右）。当然前面各步骤也可能很慢的，要看编辑的处理情况。如果被邀请审稿人不想审，就会decline，编辑会重新邀请别的审稿人。 5. required review completed 审稿结束，等编辑处理，该过程短则几天，长则无期，科学堂有一篇文章出现required review completed状态已近一个月了，还是没有消

息。 6. Decision in Process 到了这一步就快要有结果了，编辑开始考虑是给修改还是直接拒，当然也有可能直接接受的，但可能性很小，呵呵。 7. Minor revision/Major revision 小修/大修，这个时候可以稍微庆祝一下了，因为有修改就有可能。具体怎么改就不多说了，谦虚谨慎是不可少的（因为修改后一般会再发给审稿人看，所以一定要细心的回答每一个审稿人的每一个问题，态度要谦逊，要让审稿人觉得他提的每个问题都很有水准的，然后针对他的问题，一个一个的做出答复，能修改的就修改，不能修改的给出理由，而且都要列出来，文章的哪一段哪一行修改了最好都说出来，记住：给审稿人减少麻烦就是给你自己减少麻烦！另注：有时，审稿人会在修改意见里隐讳里说出要你仔细阅读某几篇文献，这时可要注意了，其中某些文章可能就是评审者自己发表的，这时你最好在你的修改稿中加以引用），修改后被拒绝的例子也多不胜数的。 8. Revision Submitted to Journal 修改后重新提交，等待编辑审理。 9. Accepted 如果不要再审，只是小修改，编辑看后会马上显示这个状态，但如果要再审也会有上面的部分状态。一步会比较快，但也有慢的。看杂志的。 10. Rejected

模具专业英文术语大全

模具英语专业术语 模具述语 一、入水：gate 进入位： gate location 水口形式：gate type 大水口：edge gate 细水口： pin-point gate 水口大小：gate size 转水口： switching runner/gate 唧嘴口径： sprue diameter 二、流道: runner 热流道： hot runner,hot manifold 热嘴冷流道: hot sprue/cold runner 唧嘴直流: direct sprue gate 圆形流道：round(full/half runner 流道电脑分析：mold flow analysis 流道平衡:runner balance 热嘴： hot sprue 热流道板：hot manifold 发热管：cartridge heater 探针: thermocouples 插头： connector plug 插座： connector socket 密封/封料： seal 三、运水：water line 喉塞：line lpug 喉管：tube 塑胶管：plastic tube 快速接头：jiffy quick connector plug/socker 四、模具零件： mold components 三板模：3-plate mold 二板模：2-plate mold 边钉/导边：leader pin/guide pin 边司/导套：bushing/guide bushing 中托司：shoulder guide bushing 中托边L：guide pin 顶针板：ejector retainner plate 托板： support plate 螺丝： screw 管钉：dowel pin 开模槽：ply bar scot 内模管位：core/cavity inter-lock 顶针： ejector pin 司筒：ejector sleeve 司筒针：ejector pin 推板：stripper plate 缩呵：movable core,return core core puller 扣机（尼龙拉勾）：nylon latch lock 斜顶：lifter 模胚（架）： mold base 上内模：cavity insert 下内模：core insert 行位（滑块）： slide 镶件：insert 压座/斜鸡：wedge 耐磨板/油板：wedge wear plate 压条：plate 撑头: support pillar 唧嘴： sprue bushing 挡板：stop plate 定位圈：locating ring 锁扣：latch 扣鸡：parting lock set 推杆：push bar 栓打螺丝：S.H.S.B 顶板：eracuretun 活动臂：lever arm 分流锥：spure sperader 水口司:bush 垃圾钉：stop pin 隔片：buffle 弹弓柱：spring rod 弹弓:die spring 中托司：ejector guide bush 中托边：ejector guide pin 镶针：pin 销子：dowel pin 波子弹弓：ball catch 喉塞: pipe plug

设计方案常用字体库中英文对照表

设计常用字体库中英文对照表 当确实字体时，Photoshop会提示丢失字体，但是提示的字体名称是 一串英文字符，即使字体的名称是中文的也是一样。这给我们的带来 了困难，很难找到对应的字体来安装。今天要用字体了，所以就收集 了下供大家参考希望对大家有帮助！ (简体部分) 中文字体名英文字体名文件名 PS name 汉字数 方正报宋简体 FZBaoSong-Z04S FZBSJW FZBSJW—GB1-0 7156 方正粗圆简体 FZCuYuan-M03S FZY4JW FZY4JW—GB1-0 7156 方正大标宋简体 FZDaBiaoSong-B06S FZDBSJW FZDBSJW—GB1-0 7156 方正大黑简体 FZDaHei-B02S FZDHTJW FZDHTJW—GB1-0 7156 方正仿宋简体 FZFangSong-Z02S FZFSJW FZFSJW—GB1-0 7156 方正黑体简体 FZHei-B01S FZHTJW FZHTJW—GB1-0 7156 方正琥珀简体 FZHuPo-M04S FZHPJW FZHPJW—GB1-0 7156 方正楷体简体 FZKai-Z03S FZKTJW FZKTJW—GB1-0 7156 方正隶变简体 FZLiBian-S02S FZLBJW FZLBJW—GB1-0 7156 方正隶书简体 FZLiShu-S01S FZLSJW FZLSJW—GB1-0 7156 方正美黑简体 FZMeiHei-M07S FZMHJW FZMHJW—GB1-0 7156 方正书宋简体 FZShuSong-Z01S FZSSJW FZSSJW—GB1-0 7156 方正舒体简体 FZShuTi-S05S FZSTJW FZSTJW—GB1-0 7152 方正水柱简体 FZShuiZhu-M08S FZSZJW FZSZJW—GB1-0 7156 方正宋黑简体 FZSongHei-B07S FZSHJW FZSHJW—GB1-0 7156 方正宋三简体 FZSong III-Z05S FZS3JW FZS3JW—GB1-0 7156 方正魏碑简体 FZWeiBei-S03S FZWBJW FZWBJW—GB1-0 7156 方正细等线简体 FZXiDengXian-Z06S FZXDXJW FZXDXJW—GB1-0 7156 方正细黑一简体 FZXiHei I-Z08S FZXH1JW FZXH1JW—GB1-0 7156 方正细圆简体 FZXiYuan-M01S FZY1JW FZY1JW—GB1-0 7156 方正小标宋简体 FZXiaoBiaoSong-B05S FZXBSJW FZXBSJW—GB1-0 7156 方正行楷简体 FZXingKai-S04S FZXKJW FZXKJW—GB1-0 7156

(完整版)英文投稿邮件写作模板

一、最初投稿Cover letter Dear Editors: We would like to submit the enclosed manuscript entitled “Paper Title”, which we wish to be considered for publication in “Journal Name”. No conflict of interest exits in the submission of this manuscript, and manuscript is approved by all authors for publication. I would like to declare on behalf of my co-authors that the work described was original research that has not been published previously, and not under consideration for publication elsewhere, in whole or in part. All the authors listed have approved the manuscript that is enclosed. In this work, we evaluated …… (简要介绍一下论文的创新性). I hope this paper is suitable for “Journal Name”. The following is a list of possible reviewers for your consideration: 1) Name A E-mail: ××××@×××× 2) Name B E-mail: ××××@×××× We deeply appreciate your consideration of our manuscript, and we look forward to receiving comments from the reviewers. If you have any queries, please don’t hesitate to contact me at the address below. Thank you and best regards. Yours sincerely, ×××××× Corresponding author: Name: ××× E-mail: ××××@×××× 二、催稿信 Dear Prof. ×××: Sorry for disturbing you. I am not sure if it is the right time to contact you to inquire about the status of my submitted manuscript titled “Paper Title”. (ID: 文章稿号), although the status of “With Editor” has been lasting for more than two months, since submitted to journal three months ago. I am just wondering that my manuscript has been sent to reviewers or not?

英文论文投稿邮件标准格式

Sample cover letter [Your Name] [Your Affiliation] [Your Address] [Date] Dear [Editor name], I/We wish to submit an original research article entitled “[title of article]” for consideration by [journal name]. I/We confirm that this work is original and has not been published elsewhere, nor is it currently under consideration for publication elsewhere. In this paper, I/we report on / show that _______. This is significant because __________. We believe that this manuscript is appropriate for publication by [journal name]because it… [specific re ference to the journal’s Aims & S cope]. __________. [Please explain in your own words the significance and novelty of the work, the problem that is being addressed, and why the manuscript belongs in this journal. Do not simply insert your abstract into your cover letter! Briefly describe the research you are reporting in your paper, why it is important, and why you think the readership of the journal would be interested in it.] We have no conflicts of interest to disclose. If you feel that the manuscript is appropriate for your journal, we suggest the following reviewers: [List reviewers and contact info, if requested by the journal] Please address all correspondence concerning this manuscript to me at [email address]. Thank you for your consideration of this manuscript. Sincerely, [Your name]

外文期刊投稿常见词语解析

外文期刊投稿时可能碰到的词语 希望对论文投稿者有所帮助。 1. Submitted to Journal 刚提交的状态 2. Manuscript received by Editorial Office 就是你的文章到了编辑手里了，证明投稿成功 3. With editor如果在投稿的时候没有要求选择编辑，就先到主编那，主编会分派给别的编辑。这当中就会有另两个状态： 3.1. Awaiting Editor Assignment指派责任编辑 Editor assigned 是把你的文章分给一个编辑处理了。 3.2. Editor Declined Invitation 如果编辑接手处理了就会邀请审稿人了。 4.随后也会有2种状态 4.1. Decision Letter Being Prepared 就是编辑没找审稿人就自己决定了，那根据一般经验，对学生来说估计会挂了 1）英文太差，编辑让修改。 2）内容太差，要拒了。除非大牛们直接被接收。 4.2. Reviewer(s) invited 找到审稿人了，就开始审稿

5. Under review 这应该是一个漫长的等待。当然前面各步骤也可能很慢的，要看编辑的处理情况。如果被邀请审稿人不想审，就会de cline，编辑会重新邀请别的审稿人。 6. Required Reviews Completed 审稿人的意见已上传，审稿结束，等待编辑决定 7. Evaluating Recommendation 评估审稿人的意见，随后你将收到编辑给你的decision 8. Minor revision/Major revision这个时候可以稍微庆祝一下了，问题不大了，因为有修改就有可能。具体怎么改就不多说了，谦虚谨慎是不可少的。 9. Revision Submitted to Journal 又开始了一个循环。 10. Accepted 恭喜了 11. Transfer copyright form 签版权协议 12. uncorrected proof 等待你校对样稿 13. In Press, Corrected Proof 文章在印刷中，且该清样已经过作者校对 14. Manuscript Sent to Production 排版

英文投稿作者须知

ONE TABLE OF CONTENTS Select an item in the table of contents to go to that topic in the document. LOGGING ON AND OFF THE AUTHOR CENTER (2) LOGGING ON (2) LOGGING OFF (3) FORGOT YOUR PASSWORD? (3) HELP DOCUMENTATION (4) THE WELCOME PAGE (4) INSTRUCTIONS AND FORMS (4) THE AUTHOR DASHBOARD (5) THE MANUSCRIPT SUBMISSION PROCESS (5) IMPORTANT NOTES (6) STEP 1 – TYPE, TITLE, & ABSTRACT (7) SUBMITTING AGENT QUESTION (8) STEP 2 – ATTRIBUTES & KEYWORDS (8) STEP 3 – AUTHORS & INSTITUTIONS (9) STEP 4 – REVIEWERS & EDITORS (10) STEP 5 – DETAILS & COMMENTS (12) STEP 6 – FILE UPLOAD (13) ZIP FILES AND LATEX DOCUMENTS (14) STEP 7 – REVIEW & SUBMIT (15) TIPS FOR AUTHORS SUBMITTING A REVISION (16)

LOGGING ON AND OFF THE AUTHOR CENTER LOGGING ON Each journal’s ScholarOne Manuscripts site has a unique Web address (URL). Typically, you are given the address in an email sent by the journal. If the address is hyperlinked, select the link within the email, or copy and paste into the browser. The journal’s Log In page is displayed. Access to the journal site may be provided in two ways: 1.The journal may create your account and email to you instructions on how to log in and set your User ID and password. 2.Some journals allow their users to create their own accounts. If yours does, there will be a Create Account link in the top right corner of the page, or you can use the New User? Register here just to the right of the Log In. Follow the 3-step process for creating your account. ?Journal-required fields are denoted by the required symbol

模具DFM常用中英文对照

DFM常用中英文对照 1、这个红色面在前模方向/后模方向/行位方向有倒扣。 This red surface is undercut at cavity side / core side / slider side. 2、这些红色面在前模方向/后模方向/行位方向有倒扣。 These red surfaces are undercut at cavity side / core side / slider side. 3、产品的这个位置太小，导致模具在前模方向/后模方向/行位方向有薄钢位。 This position is too small and it will bring the thin steel at cavity side / core side / slider side. 4、这些红色线是前后模/镶件/行位/斜顶分型线。 These red lines are the parting line of cavity and core / insert / slider / lifter. 5、此产品使用推板/推块顶出。 Use the stripper plate / ejector block to eject this part. 6、前模/后模斜内行位。 Inner angle slider at cavity / core side. 7、为了简化模具结构建议改变此处出模方向。 Suggest to change the draft direction of this position to make the mold structure simply. 8、最终的进胶位置根据模流分析。 Finally gate position according the mold flow analysis. 9、斜顶与后面的柱位空间太小，斜顶在运动时会干涉到柱子，请考虑移动这个柱子的位置。 This lifter intervene with the pole during ejection, please consider changing the position of the pole. 10、此处有薄钢位，强度不足而且不容易冷却。 The strength of this area is too weak and it is hard to cool because the thin steel. 11、此处有尖角，填充困难。 It is hard to fill for this area because the sharp feature. 12、此处料位太厚，会有缩水，建议减胶改善。 We suggest to reduce some wall thickness to avoid the sink mark for this position. 13、此处的行位夹线在外观面上，请确认是否接受？ Please confirm whether it is acceptable to have a slider line on the visible surface? 14、建议加大拔模角，以便脱模顺利。 We suggest to enlarge the draft angle to help release the tool. 15、如果分型面此处，模具上会有尖角和刀口，对模具寿命有影响。 There are sharp edges if we set the parting line here, it will reduce the tool life. 16、此处料厚段差很大，成品表面会有应力痕，建议修改如图示。 The thickness is not equal and it will bring the stress lines on the surface, suggest to improve the part as the picture shown. 17、此大行位上有小行位，开模时小行位需先退，大行位做延时，合模时则相反。 The small slider is inside the big slider, when the mold open, the small slider need to recede first and the big slider have to postpone. When the mold close, it is contrary. 18、此处需做强顶。 This position need to force ejection. 19、由于此处没有足够空间下热咀，所以需做一个柱子进胶。 This position need to make a pole for gating because there have no enough space for hot sprue. 20、沾模， stick

写作指导：英文投稿邮件写作模板

英文投稿邮件写作模板 一、最初投稿Cover letter Dear Editors: We would like to submit the enclosed manuscript entitled “Paper Title”, which we wish to be considered for publication in “Journal Name”. No conflict of interest exits in the submission of this manuscript, and manuscript is approved by all authors for publication. I would like to declare on behalf of my co-authors that the work described was original research that has not been published previously, and not under consideration for publication elsewhere, in whole or in part. All the authors listed have approved the manuscript that is enclosed. In this work, we evaluated …… (简要介绍一下论文的创新性). I hope this paper is suitable for “Journal Name”. The following is a list of possible reviewers for your consideration: 1) Name AE-mail: ××××@×××× 2) Name BE-mail: ××××@×××× We deeply appreciate your consideration of our

SCI投稿状态

SCI投稿状态自己查-投稿术语名词解释 1. Submitted to journal 刚提交的状态 2. Manuscript received by Editorial Office 就是你的文章到了编辑手里了，证明投稿成功。 3. with editor 如果在投稿的时候没有要求选择编辑，就先到主编那，主编会分派给别的编辑。这当中就会有另两个状态： 3.1 A waiting Editor Assignment指派责任编辑 Editor assignment 是把你的文章分给另一个编辑处理了。 3.2 technical check in progress 检查你的文章符合不符合期刊的投稿要求 3.3 Editor Declined Invitation 如果编辑接收处理了就会邀请审稿人了。 4. 随后也会有2种状态 4.1 Decision Letter Being Prepared 就是编辑没找到审稿人就自己决定了，那根据一般经验，对学生来说估计就会挂了1）英文太差，编辑让修改。2）内容太差，要拒了。除非大牛们直接被接收。 4.2 Review(s) invited 找到审稿人了，就开始审稿 5 Under review 这应该是一个漫长的等待。当然前面各步骤也可能很慢的，要看编辑的处理情况。如果被邀请审稿人不想审，就会decline，编辑会重新邀请别的审稿人。 6. Required Reviews Completed 审稿人的意见已经上传，审稿结束，等待编辑决定 7. Evaluating Recommendation 评估审稿人的意见，随后你将受到编辑给你的decision 8. Minor revision/ Major revision 这个时候可以稍微庆祝一下了，问题不大了，因为有修改就有可能。具体怎么改就不多说了，谦虚谨慎是不可少的。 9. Revision submitted to journal 又开始了一个循环 10 Accepted 恭喜了 11. Transfer copyright form 签版权协议 12. Uncorrected proof 等待你校对样稿 13. In press, corrected proof 文章在印刷中，且该清样已经过作者校对 14. Manuscript sent to production 排版 15. in production 出版中

模具术语翻译

模具名词中英文对照表序号中文名英文名 1一、水口gate 2进水位gate location 3水口形式gate type 4大水口edge gate 5细水口pin-point gate 6水口大小gate size 7转水口switching gate 8唧嘴口径sprue diameter 9二、流道runner 10热流道hot runner 11冷流道cold runner 12唧嘴直流direct sprue gate 13圆形流道round runner 14模流分析mold flow analysis 15流道平衡runner balance 16热嘴hot sprue 17热流道板hot manifold 18发热管cartridge heater 19探针thermocouples 20插头connector plug 21插座connector socket 22密封/封料seal 23三、运水water line 24喉塞line pug 25喉管tube 26塑胶管plastic tube 27快速接头jiffy quick connector plug 28四、模具零件mold components 29三板模three-plate mold 模具名词中英文对照表 序号中文名英文名 30二板模two-plate mold 31边钉/ 导边leader pin /guide pin

32边司/ 导套bush in g/guide bush ing 33顶针板ejector retainer plate 34托板support plate 35螺丝screw 36管钉dowel pin 37开模槽ply bar score 38内模管位core/cavity inter-lock 39顶针ejector pin 40司筒ejector sleeve 41司筒针ejector pin 42推板stripper plate 43缩呵movable core 44扣机（尼龙拉勾）n yl on latch lock 45斜顶lifter 46模胚（架）mold base 47母模cavity in sert 48公模core insert 49行位（滑块）slide 50 镶件in sert 51压座/斜鸡wedge 52耐磨板/ 油板wedge wear plate 53压条plate 54撑头support pillar 55唧嘴sprue bushing 56挡板stop plate 57定位圈locating ring 58锁扣latch 模具名词中英文对照表 序号中文名英文名 59扣鸡parti ng lock set 60推杆push bar 61栓打螺丝S.H.S.B 62顶板ejector plate 63活动臂lever arm

汉字英文对照

汉字英文对照 方正报宋简体FZBaoSong-Z04S FZBSJW FZBSJW—GB1-0 7156方正粗圆简体FZCuYuan-M03S FZY4JW—GB1-0 7156 方正大标宋简体FZDaBiaoSong-B06SFZDBSJW—GB1-0 7156 方正大黑简体FZDaHei-B02SFZDHTJW—GB1-0 7156 方正仿宋简体FZFangSong-Z02S FZFSJW—GB1-0 7156 方正黑体简体FZHei-B01S FZHTJW—GB1-0 7156 方正琥珀简体FZHuPo-M04S FZHPJW—GB1-0 7156 方正楷体简体FZKai-Z03S FZKTJW—GB1-0 7156 方正隶变简体FZLiBian-S02S FZLBJW—GB1-0 7156 方正隶书简体FZLiShu-S01S FZLSJW—GB1-0 7156 方正美黑简体FZMeiHei-M07S FZMHJW—GB1-0 7156 方正书宋简体FZShuSong-Z01S FZSSJW FZSSJW—GB1-0 7156 方正舒体简体FZShuTi-S05S FZSTJW FZSTJW—GB1-0 7152 方正水柱简体FZShuiZhu-M08S FZSZJW—GB1-0 7156 方正宋黑简体FZSongHei-B07S FZSHJW—GB1-0 7156 方正宋三简体FZSong III-Z05S FZS3JW FZS3JW—GB1-0 7156 方正魏碑简体FZWeiBei-S03S FZWBJW—GB1-0 7156 方正细等线简体FZXiDengXian-Z06S FZXDXJW FZXDXJW—GB1-0 7156 方正细黑一简体FZXiHei I-Z08S FZXH1JW—GB1-0 7156 方正细圆简体FZXiYuan-M01S FZY1JW FZY1JW—GB1-0 7156

英文投稿信件模板

Cover Letter对于论文投稿至关重要。以下是小编总结的SCI 论文投稿全过程 中要用到的 cover letter等投稿信模板，供大家分享借鉴。 一、最初投稿Cover letter Dear Editors: We would like to submit the enclosed manuscript entitled“ Paper Title” , whi we wish to be considered for publication in“ JournalconflictNameof” . No interest exits in the submission of this manuscript, and manuscript is approved by all authors for publication. I would like to declare on behalf of my co-authors that the work described was original research that has not been published previously, and not under consideration for publication elsewhere, in whole or in part. All the authors listed have approved the manuscript that is enclosed. In this work, we evaluated简??要介绍(一下论文的创新性). I hope this paper is suitable for“ Journal Name”. The following is a list of possible reviewers for your consideration: 1)Name A E-mail: ××@× ××× 2)Name B E-mail: ××@× ××× We deeply appreciate your consideration of our manuscript, and we look forward to receiving comments from the reviewers. If you have any queries, please don ’ t hesitate to contact me at the address below. Thank you and best regards. Yours sincerely, ×××××× Corresponding author: Name: ××× E-mail:×××@× ××× 二、催稿信 Dear Prof.××:

SCI期刊投稿各阶段状态解读及应对

SCI投稿状态详解及应对策略 紫雪整编 1.Submitted to Journal投稿 投稿流程一般如下：杂志官网首页，打开submit paper，以通讯作者的身份register 一个账号，然后以author login身份登录，按照提示依次完成：Select Article Type、Enter Title、Add/Edit/Remove Authors、Submit Abstract、Enter Keywords、Select Classifications、Enter Comments、Request Editor、Attach Files，最后下载pdf，确保无误后，方可到投稿主页approve submission或直接submit。 提示： 1)大多数期刊要求以word投稿，但也有要求用pdf格式的，务必细看稿约。 2)文献格式是否按拟投杂志标准要求核准？因为有的投稿系统是可以直接检查的。 3)很多系统要求作者勾选同意如伦理道德的声明文件 4)提交后可能会有一个小栏目提示对提交图片的质量做初步审查（不合格的最好重新作图再上传） 5)绝大多数投稿完成后需要最终确认（approve submission），所生成的pdf全文是否满意、合格，也是作者投稿完成前最后一次检查的机会。PS：有的新手可能忽略这点，提交后就以为自己投稿成功，殊不知并未投稿成功。 2.Manuscript received by Editorial Office文章送达，证明投稿成功。 3.With editor 若投稿时未要求选择编辑，则先到主编处，主编会分派给副主编或者其他编辑。这当中会出现另外两个状态： 3.1Awaiting Editor Assignment指派责任编辑。注：Editor assigned是把你的文章分给一个编辑处理了。 3.2Editor Declined Invitation 如果编辑接手处理了就会邀请审稿人了。 提示：一般情况下，投稿（submit）状态后一个星期内会出现编辑处理稿件（with editor）这个状态。很多老外编辑很不能理解中国人喜欢催稿，绝大多数情况下，他们不会像国内某些期刊一样能拖上一年半载再给屁大点修回意见。要适当给编辑一点时间处理，他们也很忙的。不要轻易催稿，也有人因为催稿而立马收到杯具消息——不知是编辑不耐烦了，还是一种巧合。当然，如果submit四周后网上投稿系统还没出现with editor状态信息，就要询问主编了，要注意使用委婉用语，不过也有期刊没有with editor状态。 4. With editor后送审可能出现的两种状态（Decision Letter Being Prepared或Reviewers invited）： 提示： 4.1 Decision Letter Being Prepared 就是编辑没找审稿人就自己决定了，一般情况下比较悲剧。一可能是英文太差，需要语言润色。二可能是内容太差。 4.1 Reviewer(s) invited 找到审稿人了，就开始审稿 5. Under review审稿中，此过程的等待较为漫长。