当前位置：搜档网 › IEEE关于国际会议论文出版及检索的最新说明

IEEE关于国际会议论文出版及检索的最新说明

尊敬的作者：

首先，感谢您对于IEEE会议的支持。

近日，IEEE拒绝了138个国际会议，引起了国内作者对于投稿IEEE会议的质疑。

需要注意的是，在IEEE拒绝的138个国际会议中，仅有3个在IEEE Harbin Section区域内（东北三省）。由3个会议的IEEE会议数据库显示信息（CMBB，CSIE，FBIE）可知，要么没有IEEE Harbin Section的参与，要么是Harbin Section仅作为chengdu的协办方出现。经会务组反复和IEEE Harbin Section确认，获知这3个会议并没有通过IEEE Harbin Section进行正常的申办流程，成为IEEE拒绝了会议的原因之一。

附表中给出了2007年以来IEEE Harbin Section 区域内举行的会议，除了三个红色标出的都保证了检索，2011年7月末份大连举行的ICEOE2011会议8月就已经进入了IEEE Xplore，将被EI检索。

事实表明，只要主办方和协办方秉承正常申报、严格审核，本着对作者和学术质量双方面负责的态度，IEEE并没有关闭会议出版检索的大门。本次会务组也希望能够借此次会议再一次证明IEEE Harbin Section区域内的会议虽严格但有保障。

本次会议已经完成了和IEEE所有的审批手续，仅录用400篇稿件，希望大家踊跃投稿。

ICCSNT2011会务组https://www.sodocs.net/doc/cc18324971.html,

IEEE标准格式

IEEE标准格式论文题目(使用格式:论文标题) 根据需要加的副标题第一隶属关系者姓名(第一作者姓名) 第一行(作者隶属关系的):部、组织名称第二行:组织名称、可接受的缩写第三行:城市、国家第二联系者姓名(第二作者姓名) 第一行(作者隶属关系的):部、组织名称第二行:组织名称、可接受的缩写第三行:城市、国家摘要——这个电子文档就是一个“活”的模板。论文的各个组成部分(标题，文字，页眉等)已经被定义在格式表上，本文中将对部分内容进行介绍。在论文的标题、摘要中不要使用特殊字符、特殊符号或者数学符号。(摘要) 关键字——组成部分;格式;类型;样式;插入(关键字) 一、引言(标题1) 所有的稿件必须用英文书写。本文中的这些准则包括字体，间距及出版论文全文的相关信息的完整描述。请遵循这些准则，如果你有任何问题，请直接到会议出版服务(CPS)处询问负责你论文出版的编辑。联系电话:+1(714)821-8380，传真:+1(714)761-1784。此模板给准备论文电子版的作者提供了其所需的许多格式规范。所有标准论文组件从三分方面指定:(1)方便个人论文规范化;(2)自觉遵守便于目前或以后出版电子稿论文的需求;(3)会议论文集中使用统一的格式、页边距、列宽、行距和内置的

格式样式;该文章列举了格式样式的例子，例子在括号内用斜体字进行标注，请遵循例子的格式。请不要重置页边距。像多次方程、图形及表格类的论文组成部分，本文并没有给出规定，但给出了不同的图标文本类型。有必要时可更改这些格式，并制定需要遵循的适用标准。二、论文格式及字体无论何处用到Times字体时，都需要用Times Roman或Times New Roman字体。如果文字处理器没有这两种字体，请选择外观与Times字体相近的字体。应尽可能地避免使用位图字体，首选使用True-Type1或Open Type字体。对于数学公式等，请使用公式编辑器将其插入。三、使用说明 A、选择一个模板(标题2) 首先，要确保选择一个与自己论文尺寸相符的合适的模板，且该模板应符合美国论文打印的论文纸的规格。如果用A4纸打印，请关闭此模板，下载名为 “CPS_A4_格式”的A4纸格式文件。 B、保持规范的完整性该模板用于格式化论文的。论文中的页边距、列宽、行距和字体都是有要求的，请不要更改。你可能会注意到一些特殊的地方，例如，模板中标题的页边距的比例度要比习惯中的大。因为遵照了使论文成为会刊的一部分而不是单独一个文档的一些规定，这种比例量度及其其他的要求都是针对性的。请不要修改现行的任何规定。四、请在排版前完成论文在开始排版你的论文之前，先写完论文并将其保存为一个独立的文档。在文本文档格式和排版之前，请单独保存文本和图表。为了使图像只得到一个结果，请不

ieee会议论文格式

ieee会议论文格式【篇一：sci、ieee会议论文模板】 paper title* (use style: paper title) subtitle as needed (paper subtitle) authors name/s per 1st affiliation (author) line 1 (of affiliation): dept. name of organization line 2-name of organization, acronyms acceptable line 3-city, country line 4-e-mail address if desired authors name/s per 2nd affiliation (author) line 1 (of affiliation): dept. name of organization line 2-name of organization, acronyms acceptable line 3-city, country line 4-e-mail address if desired abstract—this electronic document is a “live” template and already defines the components of your paper [title, text, heads, etc.] in its style sheet. *critical: do not use symbols, special characters, or math in paper title or abstract. (abstract) keywords—component; formatting; style; styling; insert (key words) i. introduction (heading 1) “word 97this template, modified in ms word 2007 and saved as a -2003 document” for the pc, provides authors with most of the formatting specifications needed for preparing electronic versions of their papers. all standard paper components have been specified for three reasons: (1) ease of use when formatting individual papers, (2) automatic compliance to electronic requirements that facilitate the concurrent or later production of electronic products, and (3) conformity of style throughout a conference proceedings. margins, column widths, line spacing, and type styles are built-in; examples of the type styles are provided throughout this document and are identified in italic type, within parentheses, following the example. some components, such as multi-leveled equations, graphics, and tables are not prescribed, although the various table text styles are provided. the formatter will need to create these components, incorporating the applicable criteria that follow. ii. ease of use

第十四届世界地震工程国际会议论文集6

STRONG MOTION DISTRIBUTION AND MICROTREMOR OBSERVATION FOLLOWING THE 21 MAY 2003 BOUMERDES, ALGERIA EARTHQUAKE A. Meslem1, F. Yamazaki1, Y. Maruyama1, D. Benouar2, N. Laouami3 1 Department of Urban Environment Systems, Graduate School of Engineering, Chiba University, Japan 2 Faculty of Civil Engineering, University of Bab-Ezzouar, Algiers, Algeria 3CGS, National Center of Applied Research in Earthquake Engineering, Algiers, Algeria Email: meslem@graduate.chiba-u.jp ABSTRACT: Detailed analysis was conducted for the recorded mainshock across the country during the 21 May 2003 Boumerdes, Algeria earthquake. A remarkable difference has been recorded between neighbour stations. Since local site conditions have a significant effect on the ground motions, and hence on the damage distribution caused by the earthquake, microtremor survey was conducted at several sites of seismic observation stations. In this study, a particular attention is paid to 4 seismic network stations located in the most affected area between Algiers and Boumerdes provinces. Using the microtremor records and the strong motion records from five stations, the effect of soil condition on seismic motion is investigated and the damage distribution caused by this event is explained. The results from this study show that in some stations, the recorded high PGA values were influenced by high-frequency contents. However, in other stations, soil amplification is considered to be responsible for high PGV v alues. Hence, in order to conduct a further engineering and seismological study, it is highly recommended to conduct an investigation to identify the local soil profile at the seismic stations. KEYWORDS: the 2003 Boumerdes earthquake, ground motion, microtremor, damage distribution 1. INTRODUCTION On May 21, 2003, a destructive Mw=6.8 earthquake hit the northern part of Algeria, causing a huge structural and non-structural damages and human casualties. The last report by the Algerian ministers’ council (December 12, 2003) deplores that 2,278 deaths and 11,450 injured were claimed by the earthquake. The number of homeless was counted as 250,000, corresponding to 40,000 families. As for the building damage, 17,000 units were demolished and 116,000 were repaired. The resulted direct economic loss was estimated to be 5 billion US dollars (Ousalem and Bechtoula, 2005). The earthquake was felt inside a 250 km radius zone from the epicenter (Laouami et al., 2006) and provoked the occurrence of liquefaction in the epicentral area. An uplift of coastal line was marked with the average of 0.55m (Harbi et al., 2007; Bouhadad et al., 2004; Meghraoui et al., 2004). In the European side of Mediterranean Sea, tsunamis of about 1.5m high were recorded along the coast of Spain (Alasset et al., 2006). Soon after the event, several international organizations located the 21 May 2003 Boumerdes earthquake. The location given by the Algerian Research Center of Astronomy Astrophysics and Geophysics (CRAAG) was 36.91N, 3.58E. However, the mainshock was relocated at 36.83N, 3.65E with the focal depth of 10 km (Bounif et al., 2004). The acceleration records of the mainshock were recorded by a number of accelerographs, deployed by the Algerian National Research Center of Earthquake Engineering (CGS). However, several technical problems have occurred during recording the mainshock. The number of free field seismic stations which recorded the mainshock, especially in the severely affected areas, is not sufficient for estimating a detailed strong motion

EI会议论文格式模版

Paper Title Subtitle as needed Authors Name/s per 1st Affiliation (Author) line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptable line 3: City, Country line 4: e-mail: name@https://www.sodocs.net/doc/cc18324971.html, Authors Name/s per 2nd Affiliation (Author) line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptable line 3: City, Country line 4: e-mail: name@https://www.sodocs.net/doc/cc18324971.html, Abstract—This electronic document is a “live” template. The various components of your paper [title, text, heads, etc.] are already defined on the style sheet, as illustrated by the portions given in this document. DO NOT USE SPECIAL CHARACTERS, SYMBOLS, OR MATH IN YOUR TITLE OR ABSTRACT. (Abstract) Keywords-component; formatting; style; styling; insert (key words) I.I NTRODUCTION (H EADING 1) All manuscripts must be in English. These guidelines include complete descriptions of the fonts, spacing, and related information for producing your proceedings manuscripts. Please follow them and if you have any questions, direct them to the production editor in charge of your proceedings at Conference Publishing Services (CPS): Phone +1 (714) 821-8380 or Fax +1 (714) 761-1784. This template provides authors with most of the formatting specifications needed for preparing electronic versions of their papers. All standard paper components have been specified for three reasons: (1) ease of use when formatting individual papers, (2) automatic compliance to electronic requirements that facilitate the concurrent or later production of electronic products, and (3) conformity of style throughout a conference proceedings. Margins, column widths, line spacing, and type styles are built-in; examples of the type styles are provided throughout this document and are identified in italic type, within parentheses, following the example. PLEASE DO NOT RE-ADJUST THESE MARGINS. Some components, such as multi-leveled equations, graphics, and tables are not prescribed, although the various table text styles are provided. The formatter will need to create these components, incorporating the applicable criteria that follow. II.T YPE S TYLE AND F ONTS Wherever Times is specified, Times Roman or Times New Roman may be used. If neither is available on your word processor, please use the font closest in appearance to Times. Avoid using bit-mapped fonts if possible. True-Type 1 or Open Type fonts are preferred. Please embed symbol fonts, as well, for math, etc. III.E ASE OF U SE A.Selecting a Template (Heading 2) First, confirm that you have the correct template for your paper size. This template has been tailored for output on the US-letter paper size. If you are using A4-sized paper, please close this template and download the file for A4 paper format called ―CPS_A4_format‖. B.Maintaining the Integrity of the Specifications The template is used to format your paper and style the text. All margins, column widths, line spaces, and text fonts are prescribed; please do not alter them. You may note peculiarities. For example, the head margin in this template measures proportionately more than is customary. This measurement and others are deliberate, using specifications that anticipate your paper as one part of the entire proceedings, and not as an independent document. Please do not revise any of the current designations. IV.P REPARE Y OUR P APER B EFORE S TYLING Before you begin to format your paper, first write and save the content as a separate text file. Keep your text and graphic files separate until after the text has been formatted and styled. Do not use hard tabs, and limit use of hard returns to only one return at the end of a paragraph. Do not add any kind of pagination anywhere in the paper. Do not number text heads-the template will do that for you. Finally, complete content and organizational editing before formatting. Please take note of the following items when proofreading spelling and grammar: A.Abbreviations and Acronyms Define abbreviations and acronyms the first time they are used in the text, even after they have been defined in the abstract. Abbreviations such as IEEE, SI, MKS, CGS, sc, dc, and rms do not have to be defined. Do not use abbreviations in the title or heads unless they are unavoidable. Identify applicable sponsor/s here. (sponsors)

国际会议论文格式要求

国际会议论文格式要求： Author Guidelines for 8.5 x 11-inch Proceedings Manuscripts Author(s) Name(s) Author Affiliation(s) E-mail Abstract The abstract is to be in fully-justified italicized text, at the top of the left-hand column as it is here, below the auth or information. Use the word “Abstract” as the title, in 12-point Times, boldface type, centered relative to the column, initially capitalized. The abstract is to be in 10-point, single-spaced type, and up to 150 words in length. Leave two blank lines after the abstract, then begin the main text. 1. Introduction All manuscripts must be in English. These guidelines include complete descriptions of the fonts, spacing, and related information for producing your proceedings manuscripts. Please follow them and if you have any questions, direct them to the production editor in charge of your proceedings at the IEEE Computer Society Press: Phone (714) 821-8380 or Fax (714) 761-1784. 2. Formatting your paper All printed material, including text, illustrations, and charts, must be kept within a print area of 6-1/2 inches (16.51 cm) wide by 8-7/8 inches (22.51 cm) high. Do not write or print anything outside the print area. All text must be in a two-column format. Columns are to be 3-1/16 inches (7.85 cm) wide, with a 3/8 inch (0.81 cm) space between them. Text must be fully justified. A format sheet with the margins and placement guides is available as both Word and PDF files as and . It contains lines and boxes showing the margins and print areas. If you hold it and your printed page up to the light, you can easily check your margins to see if your print area fits within the space allowed. 3. Main title The main title (on the first page) should begin 1-3/8 inches (3.49 cm) from the top edge of the page, centered, and in Times 14-point, boldface type. Capitalize the first letter of nouns, pronouns, verbs, adjectives, and adverbs; do not capitalize articles, coordinate conjunctions, or prepositions (unless the title begins with such a word). Leave two 12-point blank lines after the title. 4. Author name(s) and affiliation(s) Author names and affiliations are to be centered beneath the title and printed in Times 12-point, non-boldface type. Multiple authors may be shown in a two- or three-column format, with their affiliations italicized and centered below their respective names. Include e-mail addresses if possible. Author information should be followed by two 12-point blank lines. 5. Second and following pages The second and following pages should begin 1.0 inch (2.54 cm) from the top edge. On all pages, the bottom margin should be 1-1/8 inches (2.86 cm) from the bottom edge of the page for 8.5 x 11-inch paper; for A4 paper, approximately 1-5/8 inches (4.13 cm) from the bottom edge of the page. 6. Type-style and fonts Wherever Times is specified, Times Roman or Times New Roman may be used. If neither is available on your word processor, please use the font closest in

EI 会议论文格式模版(中文)

说明：因为很多会议论文的模版都是英文的，我们是中国人，虽然写论文要用English，但是我们可以有中文版的模版说明！本人上传这个文档是为大家写会议论文学习交流使用！翻译只是个人兴趣爱好，但是由于个人经验不是太丰富，有些专有名词翻译可能会有些出入，如有翻译不妥的地方请多包含！如果网友有翻译的更好的可以上传，让我们学习交流！这只是论文模版说明，并没有按其所说的规定进行格式编排，要看原文请参看： MSW_A4_format 好了废话不多说了,开始你的论文之旅吧！恋上咖啡的鱼 2012年6月10日

论文题目（使用样式：论文题目）副标题根据需要(论文副标题) 第一从属作者姓名第二从属作者姓名第一行（从属关系）：部门.组织机构名称第一行（从属关系）：部门.组织机构名称第二行：组织机构名称，可以接受首字母缩写第二行：组织机构名称，可以接受首字母缩写第三行：城市，国家第三行：城市，国家第四行：电子邮箱如需要的话第四行：电子邮箱如需要的话摘要—这个电子文件是“排好版的”模版。你论文的各种不同的组成部分[论文标题，正文，段落标题等]已经在这样式表中定义了，如文件中部分给出的举例说明。（摘要）关键词-组件；格式化；类型；式样；插入（关键词） 1.介绍（标题1）这个模版，对于个人电脑在MS Word 2003中修改以及保存为“Word 97-2003&6.0/95-RTF”，为作者提供了大部分他们论文需要准备的电子版本的格式规范。所有标准论文组件被指定因为三个原因：（1）当格式化个人的论文时操作简单，（2）自动符合电子需求,以促进并发或后续生产的电子产品，（3）会议论文集从头到尾风格一致。页边距，列宽度，行间距和字样是内置的；在文件中提供了字样的示例以及用斜体字类型辨识出，在圆括号中，在示例的后面。一些组件，例如多层次公式，图形和表格没有指定，尽管提供了各种表文本样式。格式化程序将需要创建这些组件,包含了适用的后续标准。 2.简单操作 A. 选择一个模版(标题2) 首先，对于你的纸张大小规格确保你有正确的模板。这个模板已被定制的输出在A4大小的纸上。如果你使用的是US letter-sized纸张，请关闭这个文件，下载“MSW_USltr_format”文件。 B. 整体性的维护规范该模板用于格式化你的论文和样式化文本。指定了所有的页边距，列宽，行间距和文本字体。请不要更改他们。你可能会注意到特性。例如，在这个模板的头部页边距测量起来是成比例的不只是习惯性的。这个尺寸和其他的东西是故意的，使用规范,期望你的论文成为整个会议论文集的一部分，而不是一个独立的文档。请不要修改任何现有的名称。 3.格式化之前准备好你的论文在开始格式化你的论文之前，首先编写并保存内容作为一个单独的文本文件。保持你的文本和图形文件是分开地,直到把文本格式化和样式化之后。不要使用硬标签，限制使用硬回车只有在一个段落的结尾可以有一个硬回车。不要添加任何类型的分页在论文的任何地方。不要为你的文本标题编号-该模板将为你做这些事情。最后，在格式化之前，完整的内容以及编辑组织。校对拼写和语法时请注意以下项目:

关于国际会议论文精选3篇

关于国际会议论文精选3篇大家上午好!今天我汇报的主题是：基于改进型LBP算法的运动目标检测系统。运动目标检测技术能降低视频监控的人力成本，提高监控效率，同时也是运动目标提取、跟踪及识别算法的基础。图像信号具有数据量大，实时性要求高等特征。随着算法的复杂度和图像清晰度的提高，需要的处理速度也越来越高。幸运的是，图像处理的固有特性是并行的，尤其是低层和中间层算法。这一特性使这些算法，比较容易在FPGA等并行运算器件上实现，今天汇报的主题就是关于改进型LBP算法在硬件上的实现。 good morning everyone. My report is about a Motion Detection System Based on Improved LBP Operator. Automatic motion detection can reduce the human cost of video surveillance and improve efficiency [?'f??(?)ns?]，it is also the fundament of object extraction, tracking and recognition [rek?g'n??(?)n]. In this work, efforts ['ef?ts] were made to establish the background model which is resistance to the variation of illumination. And our video surveillance system was realized on a FPGA based platform. PPT(2) 目前，常用的运动目标检测算法有背景差分法、帧间差分法等。帧间差分法的基本原理是将相邻两帧图像的对应像素点的灰度值进

国际会议论文排版及格式要求

国际会议论文排版及格式要求论文构成及顺序： Title（题目）→Authors（作者）→Affiliations（单位）→Abstract（摘要）→Keywords（关键词）→Text（正文）→Acknowledgements（致谢）→References（参考文献）页面设置：纸型A4；方向纵向；页边距：上2厘米，下2厘米，左2厘米，右2厘米，页眉1.5厘米，页脚1.5厘米文档网格：选中“只指定行网格”，每页46行，跨度15.6磅，栏数：1，应用于：整篇文档整篇文档段落设置：间距：段前0行，段后0行行距：单倍选中“如果定义了文档网格，则自动调整右缩进”和“如果定义了文档网格，则与网格对齐” 作者单位与摘要间空一行；关键词与正文间空一行；图、表上下各空一行；Acknowledgements上空一行；References上空一行字符间距设置：缩放：100％间距：标准位置：标准选中“调整字体的字间距”：1 选中“如果定义了文档网格，则对齐网格” 字体和字号：题目：Times New Roman，四号，居中，加粗，所有实词首字母大写作者：Times New Roman，五号，居中，姓所有字母大写，名首字母大写作者单位：Times New Roman，小五号，不同单位间用分号分隔，居中，要标明二级单位（大学：院系；研究院所：处、室等），居中，多单位在作者右上角标阿拉伯数字区分摘要和关键词：Times New Roman，六号；关键词间用分号分隔；关键词首字母小写，关键词3~8个一级标题：五号，Times New Roman字体，加粗，所有实词首字母大写；靠左顶格二级标题：小五号，Times New Roman字体，加粗，所有实词首字母大写；靠左顶格三级标题：小五号，Times New Roman字体，第一个词首字母大写；靠左顶格正文部分：小五号，Times New Roman字体；希腊字母用Symbol字体图题、表题：小五号，加粗，Times New Roman字体；第一个词首字母大写；图序、表序用Fig.1、Table 1 图、表中文字用小五号Times New Roman字体，量与单位之间用“/”间隔图注与说明、表注与说明：小五号Times New Roman字体参考文献著录：Times New Roman字体，六号（其中References用小五号）页码：小五号，Times New Roman字体图格式： 1）图序与图题间空2格，其间不用任何点号。2）图序和图题排在图的下方，整幅图左右居中，其总体长度不超过图面的宽度；否则图题应转行排。3）几幅图形共用一个图序和图题，每幅图应有子图序，如(a)，(b)，(c)等，有时可能会有子图题。子图序和子图题置于横标目的下方，相对于横坐标轴整个居中排；有时可置于图面内空白较大的地方，每个子图序和子图题在各个图面中的位置应一致。4）标目中，量符号与单位符号间用斜分数线（/）相隔。标目中的量符号与正文中的一致。5）图注与说明安排在图题的上方。6）先见文字叙述，后见图。7）图不要与文字混排，图单独通栏排。表格式： 1）采用三线表。2）表序与表题之间空2格，其间不用任何点号。3）表身内无数字的栏内，应区别情况对待。“空白”代表未测或无此项，“—”（一字线）或“…”代表未发现，“0”代表实测结果为零。4）先见文字叙述，后见表格。5）表不要与文字混排，单独通栏排。方程式、表达式编号：文中所列方程式、表达式必须按顺序编号（如：(1)），编号位置靠右顶格。方程式、表达式居中排。所有物理量的符号必须用斜体；单位必须用国际单位制（SI），必须使用正体。其他说明：