事业单位组织机构代码证_英文翻译版

The People’s Republic China Remarks

Organization Code Certificate https://www.sodocs.net/doc/d58105428.html,anization Code of the People’s Republic of China is the sole and unchanged legal code (Duplicate) for an organization in the territory of the People’s Republic of China. The Code certificate

is the certificate for an organization’s legal code mark,made in original and duplicate. Code: 46630235-2 2.The certificate shall not be leased,lent,infringed,transferred,forged,modified, or illegally

transacted.

Name of Organization: Wuxi Higher V ocational School of Tourism & Commerce 3.It must be applied for change registration when the registered matters of the certificate have

any changes.

4.The organization shall make annual check according to related regulations of issuing

authority.

Type of Organization: Undertaking Legal Person 5. When the organization is cancelled or annulled, cancellation for registration shall be made (Legal Representative:XXXX) with the original issuing authority,and the code certificate shall be recalled.

The General Administration of Quality Supervision, Inspection and Quarantine Address: XXX road Wuxi,Jiangsu of the People’s Republic of China ( Seal)

Certificate annual check shall not be informed seperately

Annual Check Record

Term of Validity: From11,Mar,2015 to 10,Mar,2019 Array Issue by: Wuxi Administration of Quality and Technology Supervision of

Jiangsu Province

Registration NO.:ZDG 320100-186719-2 NO. 2015 9435078

户口本英文翻译模板

Household Register Under Supervision of The Ministry of Public Security of P.R.C. Points for Attention 1. The Household Register has a legal force to identify the status of a citizen and the relationship of family members. It is a main basis for the household registration office to make residence investigation and check. When the household registration office makes residence investigation and check, the householder or anyone of the family members shall bring forth on his/her own initiative the Household Register. 2. The Household Register shall be under proper keep of the householder. No alter, transfer and lease is allowed. The loss of the Household Register must be reported to the household registration office promptly. 3. Only the household registration office has the power to make registration on the Household Register. No any other units and individuals are allowed to make any records on it. 4. Any increase or decrease of family members in the household or any alteration of the registration items shall be registered on the Household Register by reporting to the household registration office. 5. If the whole family has moved out of the jurisdictional area of the residence, the Household Register shall be submitted to the household registration office for cancellation.

机械毕业设计英文外文翻译460数字控制 (2)

附录 科技译文： Numerical Control Numerical Control(NC) is a method of controlling the movements of machineComponents by directly inserting coded instructions in the form of numerical data(numbers and data ) into the system.The system automatically interprets these data and converts to output signals. These signals ,in turn control various machine components ,such as turning spindles on and off ,changing tools,moving the work piece or the tools along specific paths,and turning cutting fluits on and off. In order to appreciate the importer of numerical control of machines ,let’s briefly review how a process such as machining has been carried out traditionally .After studying the working drawing of a part, the operator sets up the appropriate process parameters(such as cutting speed ,feed,depth of cut,cutting fluid ,and so on),determines the sequence of operations to be performed,clamps the work piece in a workholding device such as chuck or collet ,and proceeds to make the part .Depending on part shape and the dimensional accuracy specified ,this approach usually requires skilled

结婚证(英文翻译模板)

THE PEOPLE’S REPUBLIC OF CHINA MARRIAGE CERTIFICATE Ministry of Civil Affairs of the People’s Republic of China (The Special Seal of Management of Marriage Certificate) This application conforms to the Marriage Law of the People’s Republic of China. We hereby give them the permission to register and issue this marriage certificate. Authorized by: Special Seal for Marriage Register of XX District, Civil Affairs Bureau of Beijing Undertaker (signature): XX XXX Certificate Holder: X XX Registration Date: xx xxx 2009 Marriage Certificate No.: Jing Chao Jie Zi 050920381 Note: Name: X XX Sex: Female Nationality: Chinese Date of Birth: xx xxx 1980 ID No.: 110105xxxxxxxxxxxx Name: X X Sex: Male Nationality: Chinese Date of Birth: xx xxx 1978 ID No.: 120104xxxxxxxxxxxx

机械毕业设计英文外文翻译204机电一体化

附录 INTEGRATION OF MACHINERY （From ELECTRICAL AND MACHINERY INDUSTRY）ABSTRACT Machinery was the modern science and technology development inevitable result, this article has summarized the integration of machinery technology basic outline and the development background .Summarized the domestic and foreign integration of machinery technology present situation, has analyzed the integration of machinery technology trend of development. Key word：integration of machinery ，technology，present situation ，product t，echnique of manufacture ，trend of development 0. Introduction modern science and technology unceasing development, impelled different discipline intersecting enormously with the seepage, has caused the project domain technological revolution and the transformation .In mechanical engineering domain, because the microelectronic technology and the computer technology rapid development and forms to the mechanical industry seepage the integration of machinery, caused the mechanical industry the technical structure, the product organization, the function and the constitution, the production method and the management system has had the huge change, caused the industrial production to enter into “the integration of machinery” by “the machinery electrification” for the characteristic development phase. 1. Integration of machinery outline integration of machinery is refers in the organization new owner function, the power function, in the information processing function and the control function introduces the electronic technology, unifies the system the mechanism and the computerization design and the software which constitutes always to call. The integration of machinery development also has become one to have until now own system new discipline, not only develops along with the science and technology, but also entrusts with the new content .But its basic characteristic may summarize is: The integration of machinery is embarks from the system viewpoint, synthesis community technologies and so on utilization mechanical technology, microelectronic technology, automatic control technology,

机械类毕业设计外文翻译

本科毕业论文(设计) 外文翻译 学院：机电工程学院 专业：机械工程及自动化 姓名：高峰 指导教师：李延胜 2011年05 月10日 教育部办公厅 Failure Analysis，Dimensional Determination And

Analysis，Applications Of Cams INTRODUCTION It is absolutely essential that a design engineer know how and why parts fail so that reliable machines that require minimum maintenance can be designed．Sometimes a failure can be serious，such as when a tire blows out on an automobile traveling at high speed．On the other hand，a failure may be no more than a nuisance．An example is the loosening of the radiator hose in an automobile cooling system．The consequence of this latter failure is usually the loss of some radiator coolant，a condition that is readily detected and corrected．The type of load a part absorbs is just as significant as the magnitude．Generally speaking，dynamic loads with direction reversals cause greater difficulty than static loads，and therefore，fatigue strength must be considered．Another concern is whether the material is ductile or brittle．For example，brittle materials are considered to be unacceptable where fatigue is involved． Many people mistakingly interpret the word failure to mean the actual breakage of a part．However，a design engineer must consider a broader understanding of what appreciable deformation occurs．A ductile material，however will deform a large amount prior to rupture．Excessive deformation，without fracture，may cause a machine to fail because the deformed part interferes with a moving second part．Therefore，a part fails(even if it has not physically broken)whenever it no longer fulfills its required function．Sometimes failure may be due to abnormal friction or vibration between two mating parts．Failure also may be due to a phenomenon called creep，which is the plastic flow of a material under load at elevated temperatures．In addition，the actual shape of a part may be responsible for failure．For example，stress concentrations due to sudden changes in contour must be taken into account．Evaluation of stress considerations is especially important when there are dynamic loads with direction reversals and the material is not very ductile． In general，the design engineer must consider all possible modes of failure，which include the following． ——Stress ——Deformation ——Wear ——Corrosion ——Vibration ——Environmental damage ——Loosening of fastening devices

完整户口本英文翻译模板

ANNOUNCEMENTS 1.Household register has the legal validity that certifies the attorneyship of a citizen and the relationship of family members, and it is the main reference for the censor and checkup of domiciliary register which is undertaking by the household registration authority. When the functionary of household registration authority censor and verify the household register, the familia and members of this family shall take the initiative in presenting the household register. 2.The familia shall take the household register in safekeeping, the household register is prohibited to be alterred, transferred and leased. In case of that the household register is lost, the household registration authority should be informed. 3.The right for registering the household register shall be performed by the household registration authority, any other unit and individual shall not make any records on the booklet. 4.The member of this family shall go to the household registration authority for transacting the declaration and registration, applying bring with the booklet, in case of the increase and decrease of the members and the alteration of registration items. 5.In case of that the whole family moves out of the residency, the Household register shall be turned in and cancelled.

结婚证英文翻译模板

The People’s Republic of China Marriage Certificate Marriage Certificate of Ministry of Civil Affairs of the People’s Republic of China (seal) Under the supervision of Ministry of Civil Affairs of the People’s Republic of China Your Marriage application is in accordance with the regulations of <> and is allowed to register, and this certificate is thus issued. Issued Organ: XXX Marriage Registrar: XXX (signature) (Photo) Certificate Holder: xxx Registration Date: xx.xx, xx Marriage Certificate No.: XXXX Remark: The original Marriage Certificate is lost, this is a renewed one. xx/xx/xx Name: xxx Sex: Male Nationality: China Date of Birth: xx/xx/xx ID Card No.: xxxxxxxxx Name: xxx Sex: Female Nationality: China Date of Birth: xx/xx/xx ID Card No.: xxxxxxxxxxxx As requested by marriage law, the dual parities of man and woman to be married must personally come for the marriage registration. If they are in accordance with the marriage law, they will be registered and issued the marriage certificate. Once they have obtained marriage certificate, they are confirmed for conjugal relationship.

机械类毕业设计外文文献翻译

沈阳工业大学工程学院 毕业设计（论文）外文翻译 毕业设计（论文）题目：工具盒盖注塑模具设计 外文题目：Friction , Lubrication of Bearing 译文题目：轴承的摩擦与润滑 系（部）：机械系 专业班级：机械设计制造及其自动化0801 学生姓名：王宝帅 指导教师：魏晓波 2010年10 月15 日

外文文献原文： Friction , Lubrication of Bearing In many of the problem thus far , the student has been asked to disregard or neglect friction . Actually , friction is present to some degree whenever two parts are in contact and move on each other. The term friction refers to the resistance of two or more parts to movement. Friction is harmful or valuable depending upon where it occurs. friction is necessary for fastening devices such as screws and rivets which depend upon friction to hold the fastener and the parts together. Belt drivers, brakes, and tires are additional applications where friction is necessary. The friction of moving parts in a machine is harmful because it reduces the mechanical advantage of the device. The heat produced by friction is lost energy because no work takes place. Also , greater power is required to overcome the increased friction. Heat is destructive in that it causes expansion. Expansion may cause a bearing or sliding surface to fit tighter. If a great enough pressure builds up because made from low temperature materials may melt. There are three types of friction which must be overcome in moving parts: (1)starting, (2)sliding, and(3)rolling. Starting friction is the friction between two solids that tend to resist movement. When two parts are at a state of rest, the surface irregularities of both parts tend to interlock and form a wedging action. To produce motion in these parts, the wedge-shaped peaks and valleys of the stationary surfaces must be made to slide out and over each other. The rougher the two surfaces, the greater is starting friction resulting from their movement . Since there is usually no fixed pattern between the peaks and valleys of two mating parts, the irregularities do not interlock once the parts are in motion but slide over each other. The friction of the two surfaces is known as sliding friction. As shown in figure ,starting friction is always greater than sliding friction . Rolling friction occurs when roller devces are subjected to tremendous stress which cause the parts to change shape or deform. Under these conditions, the material in front of a roller tends to pile up and forces the object to roll slightly uphill. This changing of shape , known as deformation, causes a movement of molecules. As a result ,heat is produced from the added energy required to keep the parts turning and overcome friction. The friction caused by the wedging action of surface irregularities can be overcome

户口本英文翻译

ATTENTION 1.Residents Booklet have the force of law with proof of citizenship and relationship between family members. It is the main basis for the Household Registration Office to investigating and verifying the situation of the residence. House owner and family members should hand in the Residents Booklet when the household registration officer investigate and check the household registration 2.House owner should keep the Residents Booklet safely. It should not be altered, transfer, lend. Please report Household Registration Office. when being lost. 3.The rights of registration of Residents Booklet belong to Household Registration Office. Any other unit or individuals shall not make any records in the booklet 4.House owner should register the changes of family members or the other contents. 5.All family members moving out of residence jurisdiction should hand in Residents Booklet to Household Registration Office. No.

新版、旧版结婚证英文翻译模板.(优选)

精品word. 1 / 5 Ministry of Civil Affairs of the People ’s Republic of China (seal) Supervised by the Ministry of Civil Affairs of the People ’s Republic of China The application for marriage is in accordance with the Marriage Law of the People ’s Republic of China and allowed to register. Hereby this certificate is issued. Registration Authority: Department of Civil Affairs of XXX City XXXXXXX Province (special seal for marriage registration) Marriage Registrar: (signature) (unclear )

精品word. 2 / 5 Certificate Holder XXXXXXXX Registration Date xxx. xxth, xxxx Marriage Certificate Zi No. XXXXXXXXX Remark No Name Xxx xxxxxx Sex Male Nationality China Date of Birth xxx,xx 19xx ID card No. 0123456789900000000 Name Xxx xxxxxx Sex Female Nationality China Date of Birth xxx,xx 19xx ID card No. 0123456789900000000

机械毕业设计外文翻译---装载机发展概况

外文资料翻译 学生姓名： 专业班级：机械设计制造及其自动化04级2班指导教师： 2008年6月

装载机发展概况 Abstract This paper have discussed s.s. ZL-50 type fork-lift truck mainly overall fictitious prototype design as well as some kinds of typical schoolwork operating modes imitate and emulate , include equipment and the overall parts needed build mould. In this design course, have applied ADAMS software and the software of PRO/ENGINEER. ADAMS software is used in the emulation of some kinds of schoolwork operating modes, and the software of PRO/ENGINEER is used to build mould mainly. Through the simulated emulation for some kinds of overall schoolwork operating modes, can see relatively distinctly the overall possible condition in actual schoolwork course that met , can in time modify , have reduced actual design time , have raised production efficiency. The innovation of this design Zhi is in in, imitate and have emulated fork-lift truck the 3 kinds of typical schoolwork operating mode in actual schoolwork, is effect again have imitated in actual schoolwork the hydraulic impact of use, so when being helpful to solve actual loading, the actual problem of meeting the stock that is hard to uninstall can so raise production efficiency. Key words: Fork-lift truck 、fictitious prototype , build mould, emulation, optimization、production efficiency Loader Development China's modern 20 wheel loaders began in the mid-1960s of the Z435. The aircraft as a whole rack, rear axle steering. After years of hard work, the attraction was the world's most advanced technology wheel loader on the basis of the successful development of the power of 162 KW of shovel-fit wheel loaders, stereotypes for Z450 (later ZL50), and in 1971 December 18, formally appraised by experts. Thus the birth of China's first articulated wheel loader, thus creating our industry loader formation and development history. Z450-type loader with hydraulic mechanical transmission, power shift, Shuangqiaoshan drive, hydraulic manipulation, articulated power steering, gas oil Afterburner brake wheel loaders, and other modern, the basic structure of the world's advanced level for the time . Basically represent the first generation of wheeled loading the basic structure. The aircraft in the overall performance of dynamic, and insertion force a rise of power and flexibility, manipulation of light, the higher operating efficiency of a series of advantages. 1978, Heavenly Creations by the Department in accordance with the requirements of machinery, worked out to LIUGONG Z450-based type of wheel loaders series of standards. The development of standards, with reservations Z

机械类毕业设计外文翻译

外文原文 Options for micro-holemaking As in the macroscale-machining world, holemaking is one of the most— if not the most—frequently performed operations for micromachining. Many options exist for how those holes are created. Each has its advantages and limitations, depending on the required hole diameter and depth, workpiece material and equipment requirements. This article covers holemaking with through-coolant drills and those without coolant holes, plunge milling, microdrilling using sinker EDMs and laser drilling. Helpful Holes Getting coolant to the drill tip while the tool is cutting helps reduce the amount of heat at the tool/workpiece interface and evacuate chips regardless of hole diameter. But through-coolant capability is especially helpful when deep-hole microdrilling because the tools are delicate and prone to failure when experiencing recutting of chips, chip packing and too much exposure to carbide’s worst enemy—heat. When applying flood coolant, the drill itself blocks access to the cutting action. “Somewhere about 3 to 5 diameters deep, the coolant has trouble getting down to the tip,” said Jeff Davis, vice president of engineering for Harvey Tool Co., Rowley, Mass. “It becomes wise to use a coolant-fed drill at that point.” In addition, flood coolant can cause more harm than good when microholemaking. “The pressure from the flood coolant can sometimes snap fragile drills as they enter the part,” Davis said. The toolmaker offers a line of through-coolant drills with diameters from 0.039" to 0.125" that are able to produce holes up to 12 diameters deep, as well as microdrills without coolant holes from 0.002" to 0.020". Having through-coolant capacity isn’t enough, though. Coolant needs to flow at a rate that enables it to clear the chips out of the hole. Davis recommends, at a minimum, 600 to 800 psi of coolant pressure. “It works much better if you have higher pressure than that,” he added. To prevent those tiny coolant holes from becoming clogged with debris, Davis also recommends a 5μm or finer coolant filter. Another recommendation is to machine a pilot, or guide, hole to prevent the tool from wandering on top of the workpiece and aid in producing a straight hole. When applying a pilot drill, it’s important to select one with an included angle on its point that’s equal to or larger than the included angle on the through-coolant drill that follows. The pilot drill’s