MUR140-E354;MUR160-E354;MUR140-E373;MUR160-E373;中文规格书,Datasheet资料

Document Number: 88684For technical questions within your region, please contact one of the following:https://www.sodocs.net/doc/e61751564.html,

Ultrafast Plastic Rectifier

MUR140, MUR160

Vishay General Semiconductor

FEATURES

?Glass passivated chip junction ?Ultrafast reverse recovery time ?Low forward voltage drop ?Low leakage current

?Low switching losses, high efficiency ?High forward surge capability

?Solder dip 275 °C max. 10 s, per JESD 22-B106

?Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC

TYPICAL APPLICATIONS

For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication.

MECHANICAL DATA

Case: DO-204AC (DO-15)

Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end

PRIMARY CHARACTERISTICS

I F(AV) 1.0 A V RRM 400 V, 600 V

I FSM 35 A t rr 50 ns V F 1.05 V T J max.

175 °C

DO-204AC (DO-15)

MAXIMUM RATINGS (T A = 25°C unless otherwise noted)

PARAMETER

SYMBOL MUR140MUR160UNIT Maximum repetitive peak reverse voltage V RRM 400600V Working peak reverse voltage V RWM 400600V Maximum DC blocking voltage

V DC 400

600

V Maximum average forward rectified current at T A = 120 °C I F(AV) 1.0A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load

I FSM 35A Operating junction and storage temperature range

T J , T STG

- 65 to + 175

°C

https://www.sodocs.net/doc/e61751564.html, For technical questions within your region, please contact one of the following:Document Number: 88684

MUR140, MUR160

Vishay General Semiconductor

Note

(1)Pulse test: 300 μs pulse width, duty cycle ≤ 2 %

Note

(1)

Lead length = 3/8" on P.C.B. with 1.5" x 1.5" (38.1 mm x 38.1 mm) copper surface

RATINGS AND CHARACTERISTICS CURVES

(T A = 25 °C unless otherwise noted)

Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current

ELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted)

PARAMETER

TEST CONDITIONS SYMBOL MUR140

MUR160

UNIT Maximum instantaneous forward voltage

I F = 1.0 A

T J = 25 °C V F (1)

1.25V

T J = 150 °C 1.05Maximum instantaneous reverse current at rated DC blocking voltage

T J = 25 °C I R (1) 5.0μA T J = 150 °C

150Maximum reverse recovery time I F = 0.5 A, I R = 1.0 A, I rr = 0.25 A t rr 50ns Maximum reverse recovery time I F = 1.0 A, dI/dt = 50 A/μs,V R = 30 V, I rr = 10 % I RM t rr 75ns Maximum forward recovery time

I F = 1.0 A, dI/dt = 100 A/μs,recovery to 1.0 V

t fr

50

ns

THERMAL CHARACTERISTICS (T A = 25°C unless otherwise noted)

PARAME ER SYMBOL MUR140 MUR160 UNI T

Typical thermal resistance, junction to ambient

R θJA (1)

50

°C/W

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g)

PREFERRED PACKAGE CODE

BASE QUANTITY

DELIVERY MODE

MUR160-E3/540.4154400013" diameter paper tape and reel

MUR160-E3/73

0.41

73

2000

Ammo pack packaging

Document Number: 88684For technical questions within your region, please contact one of the following:https://www.sodocs.net/doc/e61751564.html,

MUR140, MUR160

Vishay General Semiconductor

Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Reverse Leakage Characteristics

Fig. 5 - Typical Junction Capacitance

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

Legal Disclaimer Notice https://www.sodocs.net/doc/e61751564.html, Vishay

Disclaimer

ALL PRODU CT, PRODU CT SPECIFICATIONS AND DATA ARE SU BJECT TO CHANGE WITHOU T NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereb y certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Revision: 12-Mar-121Document Number: 91000

分销商库存信息:

VISHAY-GENERAL-SEMICONDUCTOR

MUR140-E3/54MUR160-E3/54MUR140-E3/73 MUR160-E3/73