搜档网
当前位置:搜档网 › DF3AA-10P-2DS中文资料

DF3AA-10P-2DS中文资料

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF3 Series

s Features

Correspond to Board Design in Wide Variation

q ID Socket(1) Low profile design with the mounting height of 6.8mm

(2) Achieves the multi-harness by the full automatic ID machine in combination with the DF11 series ID

type.

(DF11 series represents the 2mm pitch single-row product.Please refer to page A266 to A277.) q Crimp Socket(1) Low profile design with mounting height 7.5mm.

(Please refer to the application pattern figure on page A256 for details.)

(2) Provide the contact crimping area with the sufficient space, and secures the stable crimping

operation.

q Receptacle(1) The board can be connected horizontally or vertically in combination with the straight header with the right angle header.

(2) For horizontal connection, the board to board size is the low profile of 6.6mm.

(Please refer to the application pattern on page A256 for details.)

(3) Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and

the cable side to the plug in the board to cable connection.

q Pin Header(1) The board pre-fixed kink is treated with the post pin.

(2) The style employs a scoop-proof and sturborn box type.

(3) The type corresponding to SMT is avilable, using the heat-proof resin.

This SMT header is equipped with the metal tab to prevent peeling in the solder joint area.

q In-line Plug(1) The crimping in-line plug consits of two types, one type, which has pursued after space merits, and the other employs the panel lock type, which can be fixed to the panel.

(2) The in-line adapter is available to insert and in-line the ID socket from both sides.

s Applications

Business equipment such as copy machine and printer

Note1: Maximum twice action is allowed under the same condition. However, the interval between

the first and second actions must be maintained at room temperature.

Note2: The temperature indicates the board surface temperature on the connector lead area.

Soldering iron temperature: 290±10?, Soldering time: Within 2 seconds to 0.2mm Based on both connector edges, 0.03mm max. in the connector center portion

Flow Condition with Automatic Soldering Tool. Soldering temperature: 250±5?, Soldering time: Within 3 seconds Manual Soldering Condition. Soldering iron temperature: 290±10?, Soldering time: Within 2 seconds Refer to the "Nylon Connector Use Hand book".Refer to the "Nylon Connector Use Hand book".

B Embossed Carrier Tape Dimensions

s UL CSA Safety Standard File No.UL :E52653CSA

:LR95109

s UL CSA Acquisition Objective Item 1DF3-*S-2C

2DF3/3A-*P-2DSA/DS 3DF3/DF3AA-*EP-2C 4DF3-*S-2R26/285DF3-*P-2H

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and

Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

s Material

s Product Specifications

DF 3- *S - 2C q r

e

w t y

q Series Name: DF

w Series No. : 3, 3A, 3AA e Number of Contacts: 2~15

r Connector Type

S: Socket

P: Pin Header EP: In-line Plug t Contact Pitch : 2mm y Connection Form/Contact Style

C : Crimp socket

R26 : ID socket for AWG26

R28 : ID socket for AWG28

DSA: Straight through hole

DS : Right angle through hole

V : Straight SMT

H : Right angle SMT

A : Adapter

s Ordering Information

q Connector

DF3 - EP2428PCFA

q r

e

w

q Contact Type NONE: For socket

EP: For in-line plug w Applicable Wire Size 22: AWG22

2428: AWG24to 28e Contact Type/Packaging Type

SCF : Socket contact, Embossed tape SC : Socket contact, Bag

PCF : Plug contact, Embossed tape

PC : Plug contact, Bag

r Plating Type

Blank: Tin plated

A: Gold plated

C: Gold plated

q Contact

s Application pattern

Note 1.

Mark to determine the socket name Mark6: R26, Mark8: R28

This picture shows the cable assembled status.

s ID Socket

[Specific No.]–* *, (* *)Blank : Tin plated, 100 pieces per bag (01) : Gold plated, 100 pieces per bag (20)

: Tin plated, Tube packaging

q AWG26

q AWG28productsper bag.

Note 3.If the Full automatic IDC machine to hit the DF11 single core,the (20) tube packaging specification will be applied.Note 4.Order the tube packaging product, multiplying the tube packaging quantity (pieces).

s Applicable Cable

This picture shows the Contact crimped status.

s Crimping Socket

Note2:The quantity for delivery of the specification No. "None" is determined per bag (100 pcs.).

If needed, please order the products per bag.

Note3:A quantity of "500 pieces package" and "1000 pieces package" for delivery is dealt with pieces. Order example: 500, 1000, and 1500 pieces...

q Board Through-hole Diameter:?0.70

+0.1

s Receptacle

Note1: The product's contact number indicated

[Specific No.] –* *, (* *)

(20):Tin plated, Tube packaging (50):Gold plated, Tube packaging

[Specific No.] –* *, (* *)Blank: 100 pieces per pack

q Board Through-hole Diameter:?0.80

+0.1

q Kink Pre-fixed Effective Diameter :?0.80

+0.05

s Straight Pin Header

Note : The quantity for delivery is determined per bag(100 pcs.). If needed, please order the products per bag.

Gold Plating

543-0179-4543-0180-3543-0181-6543-0182-9543-0183-1543-0184-4543-0185-7543-0186-0543-0187-2543-0188-5543-0189-8543-0190-7543-0191-0543-0192-2Part Number CL No.

DF3- 2P-2DS(01)DF3 -3P-2DS(01)DF3- 4P-2DS(01)DF3- 5P-2DS(01)DF3- 6P-2DS(01)DF3- 7P-2DS(01)DF3- 8P-2DS(01)DF3- 9P-2DS(01)DF3-10P-2DS(01)DF3-11P-2DS(01)DF3-12P-2DS(01)DF3-13P-2DS(01)DF3-14P-2DS(01)DF3-15P-2DS(01)

543-0031-3-01543-0032-6-01543-0033-9-01543-0034-1-01543-0035-4-01543-0036-7-01543-0037-0-01543-0038-2-01543-0039-5-01543-0040-4-01543-0041-7-01543-0042-0-01543-0043-2-01543-0044-5-01

B PCB mounting pattern

s Straight Pin Header (SMT)

[Specific No.] –* *, (* *)

(20):Tin plated tube packaging (50):Gold plated tube packaging

Note : If a pattern is included in the shaded area and is not treated with resist,

it could touch the connector contact.

s Right Angle Pin Header (SMT)

B PCB mounting pattern B Tube Size

Note2: Please order the emboss packaging product by the reel number. (1 reel : 1000 pcs.)

Photo: Contact inserted status

s In-line Plug

Specific No."None" item is delivered per bag (100 pcs.). Please order products per bag unit.

Unit: mm

11131517192123252729313335370608101214161820222426283032Number of Contacts A B 0204060810121416182022242628C 9.411.413.415.417.419.421.423.425.427.429.431.433.435.4D 6.38.310.312.314.316.318.320.322.324.326.328.330.332.3E

[Specific No.] –* *, (* *)Blank : 100 pcs. per bag Note1:Applicable panel thickness is 1.6 to 1.0mm. (However, a slight backlash is considered for the thickness other than 1.6and 1.2mm.)Note2:Use the non-radius surface at the hooking panel edge.Note3:Contact No. indicates 1, 4, 8,12, and 15.[Specific No.] –* *, (* *)Blank: 1 pack

Adapter to in-line by pushing 2 pcs. of socket from both sides

No.1-No.1 connection circuit type

s In-line Adapter with Panel Lock

B Panel Cutouts

[Specific No.] –* *, (* *)Blank : 100 pcs. per bag

Note1:Applicable panel thickness is 1.6

to 1.0mm.(However,backlash will occur except for 1.6, 1.2mm thickness.)

Note2:Please use the non-radius surface

at the hooking panel edge.

s Crimping Contact for Socket

Note : If any trouble has occurred due to tools other than designated tool, Hirose bears no respoisibility for any trouble.

B Applicable Crimping Tool

相关主题