T3050H-6T;T3050H-6I;T3035H-6I;T3035H-6T;中文规格书,Datasheet资料

September 2011Doc ID 17029 Rev 41/9

T3035H, T3050H

Snubberless? high temperature 30 A Triacs

Features

■High current Triac ■High immunity level

■Low thermal resistance with clip bounding ■RoHS (2002/95/EC) compliant package ■Very high commutation (3Q) at 150 °C capability

■

UL certified (ref. file E81734)

Applications

Thanks to its high electrical noise immunity level and its strong current robustness, the T30xxH series is designed for the control of AC actuators in appliances and industrial systems.

Description

Specifically designed to operate at 150 °C, the new 30 A T30xxH Triacs provide very high dynamic performance and enhanced

performance in terms of power loss and thermal dissipation. This allows optimizing the heatsink size, leading to space and cost effectiveness when compared to electro-mechanical solutions.Based on ST Snubberless? technology, they offer a specified minimal commutation and high noise immunity levels valid up to the T j max.The T30xxH series optimize safely the control of universal motors and of inductive loads found in power tools and major appliances.

By using an internal ceramic pad, the T30xxH-6I provides voltage insulation (rated at 2500 V rms).

TM : Snubberless is a trademark of STMicroelectronics

Table 1.Device summary

Symbol Value I T(rms)

30 A V DRM /V RRM

600 V I GT

35 or 50 mA

https://www.sodocs.net/doc/e910975689.html,

Characteristics T3035H T3050H

2/9Doc ID 17029 Rev 4

1 Characteristics

Table 2.

Absolute maximum rating

Symbol

Parameter

Value

Unit

I T(RMS)

On-state rms current (full sine wave)

TO-220AB

T c = 121 °C 30A

TO-220AB insul.T c = 92 °C I TSM Non repetitive surge peak on-state current (full cycle, T j initial = 25 °C) F = 50 Hz t = 20 ms 270A F = 60 Hz t = 16.7 ms

284I 2t I 2t Value for fusing

t p = 10 ms

487

A 2s dI/dt Critical rate of rise of on-state current

I G = 2 x I GT , t r ≤ 100 ns F = 120 Hz

T j = 150 °C 50A/μs V DSM /V RSM Non repetitive surge peak off-state volt-age t p = 10 μs T j = 25 °C V DSM /V RSM +100

V I GM Peak gate current

t p = 20 μs

T j = 150 °C 4A P G(AV)Average gate power dissipation T j = 150 °C

1W T stg T j

Storage junction temperature range Operating junction temperature range

-40 to +150-40 to +150

°C

Table 3.

Electrical characteristics (T j = 25 °C, unless otherwise specified)

Symbol Test conditions

Quadrant

Value

Unit

T3035H T3050H

I GT (1)1.Minimum I GT is guaranted at 20 % of I GT max.V D = 12 V R L = 33 ΩI - II - III MAX.35

50

mA V GT I - II - III MAX. 1.0V V GD V D = V DRM R L = 3.3 k ΩI - II - III

MIN.0.15

V I H (2)2.For both polarities of A2 referenced to A1.

I T = 500 mA MAX.6075mA I L

I G = 1.2 I GT

I - III MAX.7590mA II 90110dV/dt (2)V D = 67 %V DRM gate open T j = 150 °C MIN.10001500V/μs (dI/dt)c

(2)

Without snubber

T j = 150 °C MIN.

3344A/ms

T3035H T3050H Characteristics

Doc ID 17029 Rev 43/9

Table 4.

Static characteristics

Symbol Test conditions

Value Unit V TM (1)I TM = 42 A t p = 380 μs T j = 25 °C MAX. 1.55V V to (1)Threshold voltage T j = 150 °C MAX.0.85V R d (1)

Dynamic resistance T j = 150 °C MAX.15m ΩI DRM I RRM

V DRM = V RRM

T j = 25 °C MAX.

10μA

T j = 150 °C 8.5mA V D /V R = 400V (at peak mains voltage)T j = 150 °C MAX.

7V D /V R = 200V (at peak mains voltage)

T j = 150 °C

5.5

1.

for both polarities of A2 referenced to A1.

Table 5.

Thermal resistance

Symbol Parameter

Value

Unit R th(j-c)Junction to case (AC)TO-220AB 0.8°C/W TO-220AB Insul

1.6R th(j-a)

Junction to ambient

TO-220AB / TO-220AB Insul

60

°C/W

Figure 1.

Maximum power dissipation versus rms on-state current Figure 2.On-state rms current vs case temperature

Characteristics

T3035H T3050H

4/9Doc ID 17029 Rev 4

Figure 3.

On-state rms current versus ambient temperature

Figure 4.

Relative variation of thermal

impedance versus pulse duration

Figure 5.

Relative variation of gate trigger current and gate trigger voltage

Figure 6.

Relative variation of holding current and latching current vs Figure 7.

Surge peak on-state current vs

Figure 8.

Non repetitive surge peak on-state

T3035H T3050H

Characteristics

Doc ID 17029 Rev 45/9

Figure 13.Acceptable junction to ambient thermal resistance vs repetitive peak off-state voltage

Figure 9.

On state characteristics (maximum values)

Figure 10.Relative variation of critical rate of

decrease of main current vs Figure 11.Relative variation of static dV/dt

immunity vs junction temperature

Figure 12.Relative variation of leakage

current vs junction temperature for

Package information T3035H T3050H

6/9Doc ID 17029 Rev 4

2 Package information

●Epoxy meets UL94, V0

●

Recommended torque value: 0.4 to 0.6 N·m

In order to meet environmental requirements, ST offers these devices in different grades of

ECOPACK ? packages, depending on their level of environmental compliance. ECOPACK ? specifications, grade definitions and product status are available at: https://www.sodocs.net/doc/e910975689.html, . ECOPACK ? is an ST trademark.

T3035H T3050H Ordering information scheme 3 Ordering information scheme

Doc ID 17029 Rev 47/9

Ordering information T3035H T3050H

8/9Doc ID 17029 Rev 4

4 Ordering information

5 Revision history

Table 7.

Ordering information

Order code Marking Package Weight

Base qty

Delivery mode

T3035H-6T T3035H 6T TO-220AB

2.3 g

50

Tube

T3050H-6T T3050H 6T T3035H-6I T3035H 6I TO-220AB

Insulated

T3050H-6I

T3050H 6I

Table 8.

Document revision history

Date Revision

Changes

28-Jan-20101Initial release.

17-May-20102Updated maximum T j in Table 2.14-Dec-20103Updated I GT in T able 1.20-Sep-2011

4

Updated : Features .

T3035H T3050H

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.

UNLESS OTH ERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO TH E USE AND/OR SALE OF ST PRODUCTS INCLUDING WITH OUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTH ORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

? 2011 STMicroelectronics - All rights reserved

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America

https://www.sodocs.net/doc/e910975689.html,

Doc ID 17029 Rev 49/9

分销商库存信息:

STM

T3050H-6T T3050H-6I T3035H-6I T3035H-6T