NPort_IA5150_5250_QIG_v3

NPort IA5150/5250 Series

Quick Installation Guide

Third Edition, January 2006

1. Overview

NPort IA device servers deliver easy and reliable serial-to-Ethernet connectivity for the industrial automation market. The servers support several operation modes—TCP Server, TCP Client, UDP, Real COM, Pair Connection, and Ethernet Modem—ensuring the compatibility of network software, and are an ideal choice for connecting RS-232/422/485 serial devices, such as PLCs, sensors, meters, motors, drives, barcode readers, and operator displays. NPort IA device servers come with a compact and rugged DIN-Rail mountable casing.

2. Package Checklist

Before installing NPort IA device servers, verify that the package contains the following items:

y 1 NPort IA Serial Device Server

y Documentation & Software CD

y NPort IA Series Quick Installation Guide

Optional Accessories

y DR-4524 45W/2A DIN-Rail 24 VDC Power Supply with

universal 85 to 264 VAC input

y DR-75-24 75W/3.2A DIN-Rail 24 VDC Power Supply with

universal 85 to 264 VAC input

y DR-120-24 120W/5A DIN-Rail 24 VDC Power Supply with 88 to

132 VAC/176 to 264 VAC input by switch

Notify your sales representative if any of the above items is missing or damaged.

3. Hardware Introduction

NPort IA device servers are used to control RS-232/422/485 devices for industrial automation environments. Six of the models have 1

RS-232/422/485 serial port. NPort IA5150, NPort IA5150I, NPort

IA5150-M-SC, NPort IA5150I-M-SC, NPort IA5150-S-SC, and NPort

IA5150I-S-SC have 1 male DB9 port for the RS-232 interface, and a

5-pin terminal block for the RS-422/485 interface (only one port can be used at a time). One model has 2 RS-232/422/485 serial ports. NPort

IA5250 has two male DB9 ports for all interfaces. NPort IA5150 Series Appearance

Top View Bottom View

Front View

Dual power input

and relay output

RS-232

NPort IA5250 Appearance

Top View Bottom View

Front View

Dual power input

and relay output

RS-232/422/485

Reset Button—Press the Reset button continuously for 5 sec to load

factory defaults: Use a pointed object, such as a straightened paper clip or

toothpick, to press the reset button. This will cause the Ready LED to

blink on and off. The factory defaults will be loaded once the Ready LED

stops blinking (after about 5 seconds). At this point, you should release

the reset button.

NPort IA LED Indicators (front panel)

LED

Name

LED

Color

LED Function

PWR1,

PWR2

red

Power is being supplied to power input PWR1,

PWR2.

red

Steady on: Power is on and NPort IA is booting

up.

Blinking: Indicates an IP conflict, the DHCP or

BOOTP server did not respond

properly, or a relay output occurred.

green

Steady on: Power is on and NPort IA is

functioning normally.

Blinking: The device server has been located

by Administrator’s Location function

RDY

off Power is off, or power error condition exists.

orange10 Mbps Ethernet connection.

green100 Mbps Ethernet connection.

Ethernet

off Ethernet cable is disconnected, or has a short.

orange Serial port is receiving data.

green Serial port is transmitting data.

P1, P2

off

No data is being transmitted or received through

the serial port.

FX orange

Steady on: Ethernet fiber connection, but port is

idle.

Blinking: Fiber port is transmitting or receiving

data.

4. Hardware Installation Procedure

STEP 1: After removing NPort IA from the box, the first thing you

should do is connect the power adaptor. Connect the 12-48 VDC power

line with NPort IA’s terminal block, or connect the DIN-Rail power

supply with NPort IA’s terminal block.

STEP 2: Connect NPort IA to a network. Use a standard straight-through

Ethernet cable to connect to a Hub or Switch. When setting up or testing

NPort IA, you might find it convenient to connect directly to your

computer’s Ethernet port. In this case, use a cross-over Ethernet cable.

STEP 3: Connect NPort IA’s serial port to a serial device.

STEP 4: NPort IA is designed to be attached to a DIN-Rail or mounted

on a wall. The two sliders on NPort IA’s rear panel serve a dual purpose.

For wall mounting, both sliders should be extended. For DIN-Rail

mounting, start with one slider pushed in, and the other slider extended.

After placing the NPort IA on the DIN-Rail, push the extended slider in

to lock the device server to the rail. The two placement options are

illustrated in the accompanying figures.

P/N: 1802051500200

Wall Mount

DIN-Rail

to the DIN-Rail

5. Software Installation Information

To install NPort Administration Suite, insert the Document & Software CD into your computer’s CD-ROM drive. Once the installation window opens, click on the Installation Administration Suite button, and then follow the instructions on the screen. To view detailed information about NPort IA Administration Suite, click on the Documents button, and then select NPort IA5150/5250 Series User’s Manual to open the pdf version of this user’s manual.

6. Pin Assignments and Cable Wiring

RS-232/422/485 (Male DB9) Pinouts

6789

PIN RS-232 RS-422/

RS-485 (4W)

RS-485 (2W)

1 DCD TxD-(A) ---

2 RXD TxD+(B) ---

3 TXD RxD+(B) Data+(B)

4 DTR RxD-(A)

Data-(A)

5 GND GND GND

6 DSR --- ---

7 RTS --- ---

8 CTS --- ---

9 --- --- ---

4W/2W RS-485/RS-422 (Terminal Block) Pinouts

PIN 2W 4W

1 --- TxD+(B)

2 ---

TxD-(A)

3 Data+(B)RxD+(B)

4 Data-(A)RxD-(A) 54321

5 --- GND Four cables are available as optional accessories that can be used to

connect NPort IA to RS-232 serial devices. For your convenience, we

show precise cable wiring diagrams for each of the two cables.

NPort IA

9 pins9 pins

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

RS-232

Device

DCD

TxD

RxD

DSR

GND

DTR

CTS

RTS

Male DB9Female DB9

NPort IA

9 pins25 pins

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

RS-232

Device

DCD

TxD

RxD

DSR

GND

DTR

CTS

RTS

Male DB9Female DB25

7. Specifications

Power requirements NPort IA5150: 12 to 48 VDC, 360

mA at 12V (max.)

NPort

IA5150I:

12 to 48 VDC, 420

mA at 12V (max.)

NPort

IA5150-S-SC:

12 to 48 VDC, 470

mA at 12 V (max.)

NPort

IA5150I-S-SC:

12 to 48 VDC, 490

mA at 12V (max.)

NPort

IA5150-M-SC:

12 to 48 VDC, 500

mA at 12 V (max.)

NPort

IA5150I-M-SC:

12 to 48 VDC, 510

mA at 12V (max.)

NPort

IA5250:

12 to 48 VDC, 440

mA at 12 V (max.)

Operating temp. 0 to 55?C (32 to 131?F)

Operating humidity 5 to 95% RH

Dimensions

(W×D×H)

29 × 89.2 × 118.5 mm

1.14 × 3.51 × 4.67 in

Surge protection 15 KV ESD for all signals

Magnetic isolation 1.5 KV for Ethernet

4 KV Burst (EFT), EN61000-4-4

Power line protection

2 KV Surge, EN61000-4-5

Regulatory approvals FCC Class A, CE Class A, UL, CUL, TüV

Copyright ? 2005

Moxa Technologies Co., Ltd.

All rights reserved.

Reproduction without permission is prohibited.

Tel: +886-2-8919-1230 https://www.sodocs.net/doc/ed18744019.html,

Fax: +886-2-8919-1231 support@https://www.sodocs.net/doc/ed18744019.html,