SM712
Asymmetrical TVS Diode for Extended Common-Mode RS-485
SM712 replaces four discrete components by integrating two 12V and two 7V TVS diodes in a single package. The integrated design aids in reducing voltage over-shoot associated with trace inductance. The low clamping voltage of the SM712 minimizes the stress on the protected transceiver. The SM712 transient voltage suppressor (TVS) diode is designed for asymmetrical (12V to -7V) protection in multi-point data transmission standard RS-485 applications Features
Peak Power Dissipation ? 400 W (8 x 20 us Waveform)
Small package for use in portable electronics ESD protects two +12V to -7V lines Low leakage current Low clamping voltage Response Time is < 1 ns ESD protection of two lines
Solid-state silicon avalanche technology Device Meets MSL 1 Requirements
ROHS compliant
Main applications
Data lines
Industrial Controls Computers and peripherals Portable instrumentation Peripherals
Protection of RS-485 transceivers with extended common-mode range Security systems
Automatic Teller Machines HFC systems
Networks
Protection solution to meet
IEC61000-4-2 (ESD) ±30kV (air), ±30kV (contact)
IEC61000-4-4 (EFT) 40A (5/50ns)
SOT23
Maximum ratings (Tamb=25℃ Unless Otherwise Specified)
Rating Symbol Value Unit
Peak Pulse Power (tp=8/20μs waveform) P PK 400 Watts ESD Rating per IEC61000-4-2(Contact ) ESD Rating per IEC61000-4-2(Air ) V ESD 30 30 KV Lead Soldering Temperature TL 260 (10 sec.) ℃ Operating Temperature Range TJ -55 ~ 150 ℃ Storage Temperature Range
TSTG
-55 ~ 150
℃
Attention: Stresses above the max. values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit.
Electrical Characteristics at TA = 25 °C, unless otherwise specified
Electrical characteristics ( Tamb=25℃ Unless Otherwise Specified)
Symbol
Parameter Conditions
Pins 1 to 3 and 2 to 3 (12V TVS) Pins 3 to 1 and 3 to 2
(7V TVS) Units
Min.
Typ.
Max.
Min. Typ. Max.
V RWM Reverse Working
Voltage Pin 3 to 1 or Pin 2 to 1
12 7 V V BR Reverse Breakdown Voltage I T = 1mA,
13.3
7.5
V
I R
Reverse Leakage
Current
V R = V RWM
1 20 μA V C Clamping Voltage
I PP = 1A, tp =8/20μs, 18 10 V
I PP = 12A, tp =8/20μs, 28 15 V C J
Junction Capacitance
V R = 0V, f = 1MHz,
50
65
50
65
pF
Typical Characteristics at TA = 25 °C, unless otherwise specified
Figure 4-1 Pulse Waveform
Figure 4-2 Non-Repetitive Peak Pulse Power vs. Pulse Time
Figure 4-3 Power Derating Curve
Figure 4-4Junction Capacitance vs. Reverse Voltage
Application Information
Zz
SOT-23
This is a molded SOT-23 package with lead free 100 % Sn plating on the lead frame. It has a flammability rating of UL 94V-0.
DIM Millimeters
Min Max
A 0.90 1.150
A1 0.000 0.100 B 0.300 0.500 C 0.080 0.100 D 2.820 3.020
E 1.200
1.400 E1
2.25
2.550
F 0.550(BSC)
L 0.300 0.500 Mechanical Data
A1
Packaging
Item Symbol SOT-23
Carrier Width A0 3.10±0.10
Carrier Length B0 2.70±0.10
Carrier Depth K0 1.15±0.10
Sprocket Hole D0 1.50±0.05
Feed Hole Diameter R0 13±0.20 Reel Outside Diameter R1 178
Reel Inner Diameter
R2 50 MIN
Sprocket Hole Position E 1.75±0.10
Punch Hole Position F 3.50±0.05
Punch Hole Pitch P1 4.00±0.10
Sprocket Hole Pitch P0 4.00±0.10
Embossment Center P2 2.00±0.05
Overall Tape Thickness T 0.20
Tape Width W 8±0.20 Reel Width W1 14.4 MAX
Quantity per Reel
3000
DIMENSIONS =MILLIMETERS The LEADER is a minimum of 20components in length and it consists of empty cavities with sealed cover tape The TRAILER is a minimum of 20 components in length and it consists of empty cavities with sealed cover tape.
Revision 1.1, 2012-05-15
Published by
Windforce Technology
201600 Shanghai, China
? 2012 Windforce Technology
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Windforce Technology.
Warnings
Due to technical requirements components may contain dangerous substances.
For information on the types in question please contact your nearest Windforce Technologies Office.
www.winforce.hk
Published by Windforce Technology