DIN-螺丝标准
常用DIN标准
? 六角头自钻自攻螺钉DIN EN ISO 15480
? 六角头木螺钉Din 571
? 内六角紧定螺钉—凹端Din 916
? 内六角紧定螺钉—截锥端Din 914
? 弹簧垫圈DIN 128
? 十字槽圆头螺钉DIN 7996
? 牙条DIN 975
? 开槽盘头螺钉DIN 85-72
? 十字槽球面圆柱头螺钉DIN 7985-86
? 内六角紧定螺钉—导向圆柱端Din 915
? 内六角紧定螺钉—平端Din 913
? 六角法兰面螺母DIN EN 1661
? 1型六角螺母—产品等级A和B级DIN EN ISO 4032
? 方螺母—产品等级C级DIN 557
? 六角凸缘头自钻自攻螺钉DIN EN ISO 15480
? 十字槽盘头自钻自攻螺钉DIN EN ISO 15481
? 平圆头方颈螺栓DIN 603
? 圆柱头内六角螺钉DIN EN ISO 4762
? 内六角平圆头螺钉DIN EN ISO 7380
? 薄圆柱头内六角螺钉DIN 6912
? 六角头螺栓—全螺纹—产品等级A和B级DIN EN ISO 4017
? 螺杆DIN 976-1
? 内六角沉头螺钉DIN EN ISO 10642
所有DIN标准
螺栓
? 焊接螺栓Weld screws with metric head
DIN 34817
? 方头凸缘螺栓Squate head bolts with collar
DIN 478
? 平圆头方颈螺栓Mushroom head square neck bolts
DIN 603
? 沉头带榫螺栓Flat countersunk nib bolts
DIN 604
? 沉头高方颈螺栓Flat countersunk square neck bolts with long square
DIN 605
? 半圆头带榫螺栓Cup head nib bolts
DIN 607
? 沉头短方颈螺栓Flat countersunk square neck bolts with short square
DIN 608
? 六角花形大法兰面钢制螺栓Steel hexalobular head bolts with large flange DIN 34801
? 六角头铰制孔用螺栓Hexagon fit bolts
DIN 609
? M42-M160*6 六角头螺栓—产品等级B级M42 to M160*6 hexagon head bolts - Product grade B
DIN 931-2
? 六角法兰面螺栓—小系列Hexagon bolts with flange - Small series
DIN EN 1662
? 六角法兰面螺栓—加大系列Hexagon bolts with flange - Heavy series
DIN EN 1665 | 代替DIN 6921|DIN 6922
? 六角头螺栓—－产品等级B级－细杆（杆径近似等于中径）Hexagon head bolts with reduced shank(shank diameter=pitch diameter)-Product grade B
DIN EN 24015
? 六角头螺栓—产品等级A和B级Hexagon head bolts - Product grades A and B DIN EN ISO 4014 | 代替DIN 931-1
? 六角头螺栓—产品等级C级Hexagon head bolts - Product grade C
DIN EN ISO 4016 | 代替DIN 601
? 六角头螺栓—全螺纹—产品等级A和B级Hexagon head screws - Product grade A and B
DIN EN ISO 4017 | 代替DIN 933
? 六角头螺栓—全螺纹—产品等级C级Hexagon head screws - Product grade C DIN EN ISO 4018 | 代替DIN 558
? 六角头螺栓—细牙—全螺纹—产品等级A和B级Hexagon head screws with metric fine pitch thread - Product grade A and B
DIN EN ISO 8676 | 代替DIN 961
? 六角头螺栓—细牙—产品等级A和B级Hexagon head bolts with fine pitch thread - Product grades A and B
DIN EN ISO 8765 | 代替DIN 960
? 钢结构用—大六角头高强度螺栓High-strength hexagon head bolts with large widths across flats for structural steel bolting
DIN 6914
? 短螺纹端的六角头铰制孔用螺栓
DIN 610-84
? 粗杆六角头螺栓重量
DIN 931-87(3)
? Clevis pin s
DIN 1445
? Plain washers for metric bolts,screws and nuts .for general purposes General plan DIN EN ISO 887
? Hexagon head bolts with metric fine pitch thread(Product grade A and B)
DIN EN ISO 8765
? Thread run-outs and thread undercuts for ISO metric threads as in IND 13-1
DIN 76-1
? Thread run-outs and thread undercuts
DIN 76
? Bolt end protrusions
DIN 78
? Diameters of counterbores(holes)
DIN 974
? Split pin holes and wire holes in bolts,screws and studs
DIN 34803
? Bolts,screws,studs and nuts
DIN EN 20225
? Clearance holes for bolts and screws
DIN EN 20273
? T形头螺栓ISO general purpose metric screw threads. General plan
DIN ISO 261
? 一般用途螺栓和螺钉.米制系列.端头半径General purpose bolts and screws-metric series
DIN ISO 885
? T型螺栓
188
? T型螺栓
186
螺钉
? 方头短圆柱端紧定螺钉Square head bolts with short dog point
DIN 479
? 方头短圆柱球面端紧定螺钉Square head bolts with collar and oval half dog point DIN 480
? 开槽圆柱头螺钉—产品等级A级Slotted cheese head screws-Product grade A
DIN EN ISO 1207 | 代替DIN 84
? 开槽沉头螺钉（通用头型）－产品等级A级Slotted pan head screws-Product grade A
DIN EN ISO 1580 | 代替DIN 85
? 开槽沉头螺钉（通用头型）－产品等级A级Slotted countersunk flat head
screws(common head style)
DIN EN ISO 2009 | 代替DIN 963
? 开槽半沉头螺钉（通用头型）－产品等级A级Countersunk slotted raised head screws(common head style)-Produce grade A
DIN EN ISO 2010 | 代替DIN 964
? 十字槽盘头凸缘螺钉—产品等级A级Product grade A cross recessed pan head screws with collar
DIN 967
? 十字槽沉头（通用头型）螺钉－产品等级A级－第2部分：性能等级钢8.8级、不锈钢和有色金属Cross recessed countersunk flat head screws (common head
style),product grade A-Part2:Steel of property class 8.8,stainless steel and nonferous metals
DIN EN ISO 7046-2 | 代替DIN 965
? 开槽盘头螺钉
DIN 85-72
? 开槽十字孔螺钉
DIN 404-86
? 开槽小盘头螺钉
DIN 920-86
? 十字槽沉头自钻自攻螺钉Cross recessed countersunk head drilling screws with tapping screw thread
DIN EN ISO 15482
? 十字槽半沉头自钻自攻螺钉Cross recessed raised countersunk head drilling screws with tapping screw thread
DIN EN ISO 15483
? 内六角紧定螺钉—平端Hexagon socket set screws with flat point
Din 913
? 内六角紧定螺钉—截锥端Hexagon socket set screws with cone point
Din 914
? 内六角紧定螺钉—导向圆柱端Hexagon socket set screws with dog point
Din 915
? 内六角紧定螺钉—凹端Hexagon socket set screws with cup point
Din 916
? 十字槽圆头螺钉Cross recessed round head screws
DIN 7996
? 十字槽沉头自攻螺钉（通用头型）Cross recessed countersunk (flat) head tapping screws(common head style)
ISO 7050 | 代替DIN 7982
? 十字槽半沉头自攻螺钉Cross recessed raised countersunk (oval) head tapping screws
ISO 7051 | 代替DIN 7983
? 小六角头长圆柱导向端紧定螺钉Hexagon set screws with small hexangon and full dog point
DIN 561
? 小六角头短圆柱导向锥端紧定螺钉Hexagon set screws with samll hexagon,half dog point and flat cone point
DIN 564
? 钢结构用—大六角头高强度螺栓和六角螺母连接副Steel hexagon fit bolts for structural steel bolting for supply with hexagon nuts
DIN 7968
? 钢结构用—六角头螺栓和六角螺母连接副Steel hexagon head bolts for structural steel bolting for supply with hexagon nuts
DIN 7990
? 十字槽半沉头（通用头型）螺钉－产品等级A级Countersunk raised head screws (common head style) with type H or type Z cross recess-Product grade A DIN EN ISO 7047 | 代替DIN 966
? 十字槽圆柱头螺钉Cross recessed cheese head screws
DIN EN ISO 7048
? 滚花指旋螺钉
DIN 464-86
? 滚花薄头指旋螺钉
DIN 653-80
? 带螺杆的六角头螺钉
DIN 7964-77
? 开槽大盘头螺钉
DIN 921-86
? 十字槽球面圆柱头螺钉
DIN 7985-86
? Designation system for fasteners
DIN 962
? Plastic washers. Standard series
DIN 34815
? Slotted set screws with flat point
DIN EN 24766
? Slotted set screws with cone point
DIN EN 27434
? Slotted set screws with long dog point
DIN EN 27435
? Slotted set screws with cup point
DIN EN 27436
? Slotted cheese head screws
DIN EN ISO 1207
? Slotted pan head screws
DIN EN ISO 1580
? Slotted countersunk flat head screws (c ommon head style) DIN EN ISO 2009
? Countersunk slotted raised head screws(common head style) DIN EN ISO 2010
? Slotted headless screws with shand
DIN EN ISO 2342
? Hexagon head screws(Product grade A and B)
DIN EN ISO 4017
? Hexagon he ad screws(Product grade C)
DIN EN ISO 4018
? Hexagon socket set screws with flat point
DIN EN ISO 4026
? Hexagon socket set screws with cone point
DIN EN ISO 4027
? Hexagon socket set screws with dog point
DIN EN ISO 4028
? Hexagon sock et set screws with cup point
DIN EN ISO 4029
? Hexagon socket head cap screws
DIN EN ISO 4762
? Pan head screws with H or type Z cross recess(Product grade A)
DIN EN ISO 7045
? Countersunk flat head screws(common head style)with type H or ty pe Z cross recess(Product grade A)
DIN EN ISO 7046-1
? Countersunk flat head screws(common head style)with type H or type Z cross recess(Product grade A)
DIN EN ISO 7047
? Countersunk flat head screws
DIN EN ISO 7048
? Hexagon socket button head screws
DIN EN ISO 7380
? Hexagon head screws with metric fine pitch thread(Product grade A and B)
DIN EN ISO 8676
? Tapping screw and washer assemblies with plain washers
DIN EN ISO 10510
? Hexagon socket countersunk head screws
DIN EN ISO 10642
? Hexalobular socket head cap screws
DIN EN ISO 14579
? Hexalobular socket cheese head screws
DIN EN ISO 14580
? Hexalobular socket pan head screws
DIN EN ISO 14583
? Hexalobular socket raised countersunk head screws
DIN EN ISO 14584
? Scres and washer assemblies with plain washers(Washer hardness classes 200 HV and 300 HV)
DIN EN ISO 10644
? Hexalobular socket pan head tapping screws
DIN EN ISO 14585
? Hexalobular socket countersunk head
DIN EN ISO 14586
? Hexalobular socket raised countersunk(oval)head tapping screws
DIN EN ISO 14587
? Hexagon washer head drilling screws with tapping screw thread
DIN EN ISO 15480
? Cross recessed pan head drilling screws with tapping screw thread
DIN EN ISO 15481
? Cross recessed countersunk head drilling screws with tapping screw thread
DIN EN ISO 15482
? Cross recessed raisedcountersunk head drilling screws with tapping screw thread
DIN EN ISO 15483
? Countersinks. For countersunk head screws
DIN 66
? Countersinks. For countersunk head screws
DIN 74
? Screw threads
DIN 202
? Thread rolling screws
DIN 7500
? Tapping screw connections
DIN 7975
? Threads and thread ends
DIN 7998
? Wire thread inserts for ISO metric screw t hreads
DIN 8140-1
? Countersunk head screws
DIN EN 27721
? Tapping screw threads
DIN EN ISO 1478
? 十字槽螺丝Cross recesses for screws
DIN EN ISO 4757
? 螺栓和螺钉用内板拧的六角花形Hexalobular internal driving feature for bolts and screws
DIN EN ISO 10664
? 十字槽沉头螺钉ISO general purpose metric screw threads-tolerances
DIN ISO 965
? 十字槽沉头螺钉ISO general purpose metric screw threads-tolerances
DIN ISO 965-2
? 十字槽沉头螺钉ISO general purpose metric screw threads-tolerances
DIN ISO 965-3
? 十字槽沉头螺钉ISO general purpose metric screw threads-tolerances
DIN ISO 965-4
? 十字槽沉头螺钉ISO general purpose metric screw threads-tolerances
DIN ISO 965-5
内六角螺钉
? 内六角沉头螺钉Hexagon socket countersunk head screws
DIN EN ISO 10642 | 代替DIN 7991
? 薄圆柱头内六角螺钉Hexagon socket thin head cap screws
DIN 7984
? 圆柱头内六角螺钉Hexagon socket head cap screws
DIN EN ISO 4762 | 代替DIN 912
? 内六角平圆头螺钉Hexagon socket button head screws
DIN EN ISO 7380
? 圆柱头内六角花形钢制螺钉Steel hexalobular head cap screws with large driving
feature
DIN 34802
? 薄圆柱头内六角螺钉Hexagon socket thin head cap screws with pilot recess for wrench key
DIN 6912
? 六角花形小法兰面钢制螺栓Steel hexalobular head bolts with small flange
DIN 34800
自攻螺钉
? 六角头自钻自攻螺钉Hexagon washer head drilling screws with tapping screw thread
DIN EN ISO 15480 | 代替DIN 7504
? 六角凸缘头自钻自攻螺钉Hexagon washer head drilling screws with tapping screws thread
DIN EN ISO 15480
? 十字槽盘头自钻自攻螺钉Cross recessed pan head drilling screws with tapping screw thread
DIN EN ISO 15481
? 十字槽盘头自钻自攻螺钉Cross recessed pan head drlling screws with tapping screw thread
DIN EN ISO 15481 | 代替DIN 7504
? 十字槽沉头自钻自攻螺钉Cross recessed countersunk head drilling screws with tapping screw thread
DIN EN ISO 15482 | 代替DIN 7504
? 十字槽半沉头自钻自攻螺钉Cross recessed raised counterunk head drilling screws with tapping screw thread
DIN EN ISO 15483 | 代替DIN 7504
? 自钻自攻螺钉Drilling screws with tapping screw thread
DIN EN ISO 10666 | 代替DIN 7504
? 六角头和开槽头三角牙螺钉—尺寸、技术要求及试验Hexagon head and slotted head thread cutting screws - Dimensions,requirements and testing
DIN 7513
? 十字槽螺纹滚成自攻螺钉—尺寸、技术要求及试验Cross recessed head thread cutting screws - Dimensions,requirements and testing
DIN 7516
? 米制螺纹滚成自攻螺钉—型式、名称及技术要求ISO metric thread rolling screws - Types,designation and requirements
DIN 7500-1
? 米制螺纹滚成自攻螺钉—预制孔直径尺寸方案Tread rolling screws for ISO metric thread - Guideline values for hole diameters
DIN 7500-2
? 紧固件供货技术条件—米制螺纹—性能等级为10.9级的螺纹滚成自攻螺钉Technical delivery conditions for fasteners - Metric thread rolling screws of property class 10.9
DIN 267-30
? 十字槽盘头凸缘自攻螺钉Cross recessed pan head tapping screws with collar DIN 968
? 六角凸缘自攻螺钉Hexagon washer head tapping screws
DIN 6928
? 自攻螺钉用螺纹Tapping screw threads
DIN EN ISO 1478 | 代替DIN 7970
? 六角头自攻螺钉Hexagon head tapping screws
ISO 1479 | 代替DIN 7976
? 开槽盘头自攻螺钉Slotted pan head tapping screws
ISO 1481 | 代替DIN 7971
? 开槽沉头自攻螺钉（通用头型）Slotted countersunk(flat)head tapping
screws(common head style)
ISO 1482 | 代替DIN 7972
? 开槽半沉头自攻螺钉（通用头型）Slotted raised countersunk (oval) head tapping screws(common head style)
ISO 1483 | 代替DIN 7973
? 十字槽盘头自攻螺钉Cross recessed pan head tapping screws
ISO 7049 | 代替DIN 7981
木螺钉
? 开槽半沉头木螺钉Slotted raised countersunk(oval) head wood screws
Din 95
? 开槽半圆头木螺钉Slotted round head wood screws
Din 96
? 开槽沉头木螺钉Slotted countersunk(flat) head wood screws
Din 97
? 六角头木螺钉Hexagon wood screws
Din 571
? 十字沉头木螺钉Cross recessed countersunk (flat) head wood screws
DIN 7997
螺杆和螺柱
? 牙条Threaded rod
DIN 975
? 螺杆Metric thread stud bolts
DIN 976-1
? 螺杆—过盈配合螺纹Metric interference-fit thread stud bolts
DIN 976-2
? Welding studs for turnbuckles
DIN 34828
? High-strength structural bolting assemblies. For preloading
DIN EN 14399-3
? High-strength structural bolting assemblies. For preloading
DIN EN 14399-4
? Hexagon bolts with flange-Small series
DIN EN 1662
? Hexagon bolts with flange-Heavy series
DIN EN 1665
? Hexagon bolts with flange w ith metric fine pitch thread
DIN EN 14219
? High-strength structural bolting assemblies for preloading
DIN EN 14399-3
? High-strength structural bolting assemblies for preloading
DIN EN 14399-4
? Hexagon head bolts with reduced shank
DIN EN 24015
? Hexagon head bolts(Product grade A and B)
DIN EN ISO 4014
? Hexagon head bolts(Product grade C)
DIN EN ISO 4016
铆钉
? 半圆头钢铆钉—公称直径10~36mm Steel round head rivets with nominal diameters from 10 to 36 mm
DIN 124
? 沉头钢铆钉—公称直径10~36mm Steel countersunk head rivets with nominal diameters from 10 to 36 mm
DIN 302
? 半圆头铆钉—公称直径1~8mm Round head rivets with nominal diameters from 1 to 8 mm
DIN 660
? 沉头铆钉—公称直径1~8mm Countersunk head rivets with nominal diameters from 1 to 8 mm
DIN 661
? 半沉头铆钉—公称直径1.6~6mm Oval-head rivets with nominal diameters from 1,6 to 6 mm
DIN 662
? 大半圆头铆钉—公称直径1.6~6mm Mushroom head rivets with nominal diameters from 1,6 to 6 mm
DIN 674
? 沉头铆钉—公称直径3~5mm Flat countersunk head rivets with nominal diameters from 3 to 5 mm
DIN 675
? 铆钉用具Rivet sets
DIN 6434
? 盘头半空心铆钉—公称直径1.6~10mm Semitubular pan head rives with nominal diameters from 1,6 to 10 mm
DIN 6791
? 沉头半空心铆钉—公称直径1.6~10mm Semitubular countersunk head rivets with nominal diameters from 1,6 to 10 mm
DIN 6792
? 冲制铆钉Compression rivets
DIN 7331
? 开口型盲铆钉Break mandrel blind rivets
DIN 7337
? 开口型和封闭型铆钉Break and clutch lining rivets
DIN 7338
? 板料拉延管铆钉One-piece tubular rivets drawn from strip
DIN 7339
? 管制空心铆钉Tubular rivets made from tube
DIN 7340
? Steel round head rivets
DIN 124
? Round head rivets
DIN 660
? Countersunk head rivets
DIN 661
? Oval-head rivets
DIN 662
? Mushroom head rivets
DIN 674
? Flat countersunk head rivets
DIN 675
? Semitubular pan head rivets. With nominal diameters from 1,6 to 10mm
DIN 6791
? Compression rivets
DIN 7331
? Brake and clutch lining rivets
DIN 7338
? One-piece tubular rivets
DIN 7339
? Tubular rivets
DIN 7340
? Rivet pi ns
DIN 7341
? Grooved pins with countersunk head
DIN EN ISO 8747
螺母
? 非金属嵌件六角法兰面锁紧螺母Prevailing torque type hexagon nuts with
flange(with non-metallic insert)
DIN EN 1663 | 代替DIN 6926
? 非金属嵌件六角锁紧薄螺母Prevailing torque type hexagon thin nuts (with
non-metallic insert )
DIN EN ISO 10511 | 代替DIN 985
? 钢结构用—大六角螺母Steel hexagon nuts with large widths across flats for high -
strength structural bolting
DIN 6915
? 塑料六角螺母Plastic hexagon nuts
DIN 34814
? 六角法兰面螺母Hexagon nuts with flange
DIN EN 1661 | 代替DIN 6923
? 1型六角螺母—产品等级A和B级Hexagon nuts,style 1-Product grades A and B DIN EN ISO 4032 | 代替DIN 934
? 2型六角螺母—产品等级A和B级Hexagon nuts,style 2-Product grades A and B DIN EN ISO 4033
? 六角螺母—产品等级C级Hexagon nuts - Product grade C
DIN EN ISO 4034 | 代替DIN 555
? 方螺母—产品等级C级Product grade C square nuts
DIN 557
? 薄型方螺母—产品等级B级Square thin nuts - Product grade B
DIN 562
? 六角薄螺母（倒角型）—产品等级A和B级Hexagon thin nuts(chamfered)-Product grade A and B
DIN EN ISO 4035 | 代替DIN 439-2
? 六角薄螺母（无倒角型）—产品等级B级Hexagon thin nuts - Product grade
B(unchamfered)
DIN EN ISO 4036 | 代替DIN 439-1
? 1型六角螺母—细牙螺纹—产品等级A和B级Hexagon nuts,style 1,with metric fine pitch thread - Product grades A and B
DIN EN ISO 8673 | 代替DIN 934|DIN 971-1
? 2型六角螺母—细牙螺纹—产品等级A和B级Hexagon nuts,style 2,with metric fine pitch thread - Product grades A and B
DIN EN ISO 8674 | 代替DIN 971-2
? 六角薄螺母—细牙螺纹—产品等级A和B级Hexagon thin nuts with metric fine pitch thread - Product grades A and B
DIN EN ISO 8675 | 代替DIN 439-2
? 六角开槽螺母—粗牙螺纹和细牙螺纹—产品等级A和B级Hexagon slotted nuts and caltle nuts with metric coarse and fine pitch thread - Product grades A and B DIN 935-1
? 六角开槽螺母—产品等级C级Hexagon slotted nuts with metric coarse pitch thread - Product grade C
DIN 935-3
? 六角开槽薄螺母—产品等级A和B级Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grade A and B
DIN 979
? 六角盖形螺母—扁球型Hexagon cap nuts
DIN 917
? 六角盖形螺母—半圆球型Hexagon domed cap nuts
DIN 1587
? 非金属嵌件六角组合式盖形锁紧螺母Prevailing torque hexagon domed cap nuts with non-metallic insert
DIN 986
? 1型全金属六角锁紧螺母—性能等级5、8和10级Prevailing torque type all-metal hexagon nuts,style 1- Property classes 5,8 and 10
DIN EN ISO 7719
? 开槽螺塞(螺纹塞）Screwed inserts(screw plugs)
DIN 7965
? 冲压自锁螺母Self-locking counter nuts
DIN 7967
? 三角凸缘螺母—矿山用防雷防爆电气设备用Triangular nuts for use with electrical equipment in mining
DIN 22425
? 小对边薄螺母—粗牙和细牙Thin nuts with coarse pitch and fine pitch thread and with small widths across flats
DIN 80705
? 全金属六角法兰面锁紧螺母Prevailing torque type all-metal hexagon nuts with flange
DIN EN 1664 | 代替DIN 6927
? 非金属嵌件六角法兰面锁紧螺母－细牙Prevailing torque type hexagon nuts with flange(with non-metallic insert)with metric fine pitch thread
DIN EN 1666 | 代替DIN 6926
? 全金属六角法兰面锁紧螺母－细牙Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread
DIN EN 1667 | 代替DIN 6927
? 1型非金属嵌件六角锁紧螺母—性能等级5、8和10级Prevailing torque type hexagon nuts (with non-metallic insert),style 1 - Property classes 5,8 and 10 DIN EN ISO 7040 | 代替DIN 982|DIN 6924
? 2型全金属六角锁紧螺母—性能等级5、8、10和12级Prevailing torque type all-metal hexagon nuts,style 2 - Property classes 5,8, 10 and 12
DIN EN ISO 7042 | 代替DIN 980|DIN 6925
? 1型非金属嵌件六角锁紧螺母—细牙—性能等级6、8和10级Prevailing torque type hexagon nuts (with non-metallic insert),style 1,with metric fine pitch thread-Property classes 6,8 and 10
DIN EN ISO 10512 | 代替DIN 982|DIN 6924
? 2型全金属六角锁紧螺母—细牙—性能等级8、10和12级Prevailing torque type all-metal hexagon nuts,style 2,with metric fine pitch thread - Property classes 8,10 and 12 DIN EN ISO 10513 | 代替DIN 980|DIN 6925
? 焊接方螺母Square weld nuts
DIN 928
? 焊接六角螺母Hexagon weld nuts
DIN 929
? 焊接六角法兰面螺母Hexagon weld nuts with flange
DIN 977
? 圆头滚花螺母Knurled nuts with collar
DIN 466
? 圆头滚花薄螺母Knurled nuts
DIN 467
? 厚圆头滚花螺母Knurled nuts
DIN 6303
? 蝶形螺母—方翼Wing nuts with edged wings
DIN 314
? 蝶形螺母—圆翼Wing nuts with rounded wings
DIN 315
? 管螺母—螺纹符合ISO 228-1 Pipe nuts with thread as in ISO 228-1
DIN 431
? 圆螺母—端面开槽Slotted round nuts
DIN 546
? 圆螺母—端面带孔Round nuts with drilled holes in one face
DIN 547
? 圆螺母—恻面带孔Round nuts with set pin holes in side
DIN 548
? 吊耳螺母Lifting eye nuts
DIN 582
? 圆型套筒螺母—钢制Turnbuckles made from steel tube or round steel bars DIN 1478
? 六角套筒螺母Hexagon turnbuckles
DIN 1479
? 套筒螺母—组合开启型Turnbuckles,forged（open type)
DIN 1480
? 六角螺母—腰状杆螺栓连接副用Hexagon nuts for use with bolts with waisted shank
DIN 2510-5
? 罩螺母—腰状杆螺栓连接副用Cap nuts for use with bolts with waisted shank DIN 2510-6
? 受力管套—腰状杆螺栓连接副用Sleeves for use with bolts with waisted shank DIN 2510-7
? 六角螺母—m=1.5d Hexagon nuts with a height of 1,5d
DIN 6330
? 六角凸缘螺母—m=1.5d Hexagon collar nuts with a height of 1,5d
DIN 6331
? 专用地脚螺钉用地脚螺母
DIN 798-1972
? 六角薄螺母（老标准）（产品等级A和B级）
DIN 936-1985
? 六角冕形薄螺母（原类型）
DIN 937-1987
? 六角开槽薄螺母和六角冕形薄螺母米制粗牙和细牙产品等级A和B级
DIN 979-1987
? 汽车和拖车用圆盘轮螺母螺柱定心用紧固件
DIN 74361-1982 第2部分
? 载重汽车和拖挂车的圆盘轮外部件紧固件
DIN 74361-1979 第3部分
? Wing nuts with edged wings
DIN 314
? Pipe nuts with thread as in ISO 228-1
DIN 431
? Knurled nuts with collar
DIN 466
? Short knurled nuts
DIN 467
? Slotted round nuts
DIN 546
? Round nuts with drilled holes in one face
DIN 547
? Round nuts with set pin holes in side
DIN 548
? Product grade C square nuts
DIN 557
? Square thin nuts
DIN 562
? Eyenuts for lifting purposes
DIN 582
? Hexagon cap nuts
DIN 917
? Overview of European Standards for fasteners
DIN 918
? Square weld nuts
DIN 928
? Hexagon weld nuts
DIN 929
? Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread(Product grade A and B)
DIN 935-1
? Hexagon slotted nuts with metric coarse pitch thread(Prod uct grade C)
DIN 935-3
? Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread(Product grade A and B)
DIN 979
? Prevailing torque type hexagon domed cap nuts with non-metallic insert DIN 986
? Hexagon domed cap n uts
DIN 1587
? Boloted connections with reduced shank hexagon nuts
DIN 2510
? Knurled nuts
DIN 6303
? Hexagon nuts with a height of 1,5 d
DIN 6330
? Hexagon nuts with collar,with a height of 1,5 d
DIN 6331
? Plastic hexagon nuts
DIN 34814
? Plastic washers. large series
DIN 34816
? Thin nuts with coarse pitch and fine pitch thread and with small widths across flats DIN 80705
? Hexagon nuts with flange
DIN EN 1661
? Prevailing torque type hexagon nuts with flange(with non-metallic insert)
DIN EN 1663
? Prevailing torque type all-metal hexagon nuts with flange
DIN EN 1664
? Prevailing torque type hexagon nuts with flange(with non-metallic insert),with metric fine pitch thread
DIN EN 1666
? Prevailing torque type all-metal hexagon nuts with flange,with metric fine pitch thread
DIN EN 1667
? Hexagon nuts with flange. Fine pitch thread
DIN EN 14218
? Hexagon nuts,style 1(Product grades A and B)
DIN EN ISO 4032
? Hexagon nuts,style 2(Product grades A and B)
DIN EN ISO 4033
? Hexagon nuts(Product grades C)
DIN EN ISO 4034
? Hexagon thin nuts(chamfered)(Product grades A and B)
DIN EN ISO 4035
? Hexagon thin nuts(unchamfered)(Product grades B)
DIN EN ISO 4036
? Tolerances for fasteners
DIN EN ISO 4759
? Prevailing torque type hexagon nuts(with non-metallicinsert),style 1 Property classes5,8 and 10
DIN EN ISO 7040
? Prevailing torque type hexagon nuts(with non-metallicinsert),style 2 -Property classes 5,8,10 and 12
DIN EN ISO 7042
? Hexagon nuts,style 1,with metric fine pitch thread (Product grades B)
DIN EN ISO 8673
? Hexagon nuts,style 2,with metric fine pitch thread (Product grades A and B)
DIN EN ISO 8674
? Prevailing torque type hexagon thin nuts(wi th non-metallic insert)
DIN EN ISO 10511
? Prevailing torque type all-metal hexagon nuts,style 1 Property classes 5,8 and 10 DIN EN ISO 7719
? Hexagon thin nuts (chamfered)with metric fine pitch thread(Product grades A and B) DIN EN ISO 8675
? Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with metric fine pitch thread-Property classes6,8 and 10
DIN EN ISO 10512
? Prevailing torque type all-metal hexagon nuts,style 2,with metric fine pitch
thread-Property classes8,10 and 12
DIN EN ISO 10513
? Hexagon weld nuts with flange
DIN EN ISO 21670
? Bolted connections with reduced shank
DIN 2510
? 非钎焊和钎焊压合接头.管接螺母系列LL Non-soldering and soldering compression fittings - Union nuts series LL
3870-2001 | 代替DIN 3870-1985;DIN 3870-19
垫圈
? 十字槽盘头螺钉—产品等级A级Pan head screws with type H or type Z cross recess-Product grade A
DIN EN ISO 7045 | 代替DIN 7985
? 十字槽沉头（通用头型）螺钉－产品等级A级－第1部分：性能等级钢4.8级Countersunk flat head screws (common head style)with type H or type Z cross
recess,product grade A-Part 1:Steel of property class 4.8
DIN EN ISO 7046-1 | 代替DIN 965
? 弹簧垫圈(DIN 127) Helical spring lock washers,sprint steel
127
? 钢制的，普通系列平垫圈Flat Washers, steel normal series
125B | 代替7090
? 钢制的，普通系列平垫圈Flat Washers, steel normal series
125A
? 方垫圈—木结构用Square washers for use in timber constructions
DIN 436
? 方孔方垫圈—木结构用Washers with square hole for use in timber constructions DIN 440
? 粗制平垫圈—螺栓用Washers,coarse type,or bolts
DIN 1441
? 精制平垫圈Washers for clamping devices
DIN 6340
? 平垫圈—带重型夹紧套螺栓用Plain washers for bolts with heavy clamping sleeves DIN 7349
? 塑料垫圈—标准系列Plastic washers-Standard series
DIN 34815
? 塑料垫圈—大系列Plastic washers-Large series
DIN 34816
? 销轴用平垫圈—产品等级A级Plain washers for use with clevis pins-Product grade A
DIN EN 28738 | 代替DIN 1440
? 平垫圈—标准系列—产品等级A级Plain washers-Normal series-Product grade A DIN EN ISO 7089
? 平垫圈—倒角型—标准系列—产品等级A级Plain washers,chamfered-Normal series-Product grade A
DIN EN ISO 7090
? 平垫圈—标准系列—产品等级C级Plain washers-Normal series-Product grade C DIN EN ISO 7091
? 平垫圈—小系列—产品等级A级Plain washers-Small series-Product grade A
DIN EN ISO 7092
? 平垫圈—大系列—第一部分：产品等级A级Plain washers-Large series-Part 1: Product grade A
DIN EN ISO 7093-1
? 平垫圈—标准系列—第3部分：产品等级C级Plain washers-Normal series-Part 3: Product grade C
DIN EN ISO 7093-2
? 平垫圈—特大系列—产品等级C级Plain washers-Extra large series -Product grade C
DIN EN ISO 7094
? 长单耳止动垫片Tab washers with long tab
DIN 93
? 弹簧垫圈Curved spring lock washers
DIN 128
? 波形弹性垫圈Wave spring washers
DIN 137
? 外舌止动垫片External tab washers(locking tab washers)
DIN 432
? 双耳止动垫片Tab washers with short and long tab at right angles
DIN 463
? 安全杯—DIN84开槽圆柱头螺钉用Safety cups for cheese head screws according to DIN 84
DIN 526
? 密封垫圈Shim rings and supporting rings
DIN 988
? 螺栓、螺母组合件用锥形弹性垫圈Conical spring washers for bolt/nut assemblies DIN 6796
? 锯齿锁紧弹性垫圈Toothed lock washers
DIN 6797
? 外锯齿锁紧垫圈Serrated lock washers
DIN 6798
? 螺钉和垫圈组合件用波形弹性垫圈Curved spring washers for screw and washer assemblies
DIN 6904
? 螺钉和垫圈组合件用弹簧垫圈Spring lock washers for screw and washer assemblies
DIN 6905
? 螺钉和垫圈组合件用外锯齿锁紧垫圈Serrated lock washers with extermal teeth for screw and washer assemblies
DIN 6907
? 螺钉和垫圈组合件用锥形弹性垫圈Conical sring washers for screw and washer assemblies
DIN 6908
? 自攻螺钉和垫圈组合件用平垫圈—标准系列和大系列—产品等级A级Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A DIN EN ISO 10669
? 螺钉和垫圈组合件用平垫圈—小系列、标准系列及大系列—产品等级A级Plain washers for screw and washer assemblies - Small,normal and large series - Product grade A
DIN EN ISO 10673
? 槽钢用方斜垫圈Square taper washers for use with channel sections
DIN 434
? I型工字钢用方斜垫圈Square taper washers for use with I sections
DIN 435
? 钢结构高强度螺栓连接—圆垫圈Round washers for high-strength structural steel bolting
DIN 6916
? 钢结构高强度螺栓连接—I型工字钢用方斜垫圈Square taper washers for
high-strength structural bolting of steel I sections
DIN 6917
? 钢结构高强度螺栓连接—槽钢用方斜垫圈Square taper washers for high-strength structural bolting of steel channel sections
DIN 6918
? 钢结构用垫圈—产品等级C级Washers for use in structural steelwork - Product grade C
DIN7989-1
? 钢结构用垫圈—产品等级A级Washers for use in structural steelwork - Product
grade A
DIN7989-2
? 密封垫圈Shim rings and supporting rings
DIN 988
? 平垫圈—重型螺栓用Plain washers for bolts with heavy clamping sleeves
DIN 7349
? Shim rings and supporting rings
DIN 988
? Plain washers. For bolts with heavy clamping sleeves
DIN 7349
? Blind rivets
DIN EN ISO 14589
? Square taper steel washers for use with channel sections
DIN 434
? Square taper steel washers for use with I sections
DIN 435
? Square washers
DIN 436
? Washers wit h square hole for use in timber constructions
DIN 440
? Shim rings and supporting rings
DIN 988
? Washers type coarse for bolts
DIN 1441
? Washers for clamping devices
DIN 6340
? Conical spring washers. for bolt/nut assemblies
DIN 6796
? Conical spring washers
DIN 6908
? Square taper washers. For high-strength structural bolting of steel | sections
DIN 6917
? Square taper washers. For high-strength structural bolting of steel channel sections DIN 6918
? Plain washers. For Bolts with Heavy Clamping Sleeves
DIN 7349
? Washers for use in structural steelwork(Product grade C)
DIN 7989-1
? Washers for use in structural steelwork(Product grade A)
DIN 7989-2
? Chamfered plain washers for use in structural steel work
DIN 34820
? High-strength structural bolting assemblies. For preloading
DIN EN 14399-5
螺丝的规格及国家标准
2000版紧固件国家标准 标准号标准内容备注 GB/T3098.1-2000 紧固件机械性能螺栓、螺钉和螺柱 ISO898-1：1999 GB/T3098.2-2000 紧固件机械性能螺母粗牙螺纹 ISO898-2：1992 GB/T3098.3-2000 紧固件机械性能紧定螺钉 ISO898-5：1998 GB/T3098.4-2000 紧固件机械性能螺母细牙螺纹 ISO898-6：1994 GB/T3098.5-2000 紧固件机械性能自攻螺钉 ISO2702：1992 GB/T3098.6-2000 紧固件机械性能不锈钢螺栓、螺钉和螺柱 ISO3506-1：1997 GB/T3098.7-2000 紧固件机械性能自挤螺钉 ISO7085：1999 GB/T3098.14-2000 紧固件机械性能螺母扩孔试验 ISO10484：1997 GB/T3098.15-2000 紧固件机械性能不锈钢螺母 ISO3506-2：1998 GB/T3098.16-2000 紧固件机械性能不锈钢紧定螺钉 ISO3506-3：1997 GB/T1237-2000 紧固件标记方法 ISO8991：1986 字串9 GB/T 41-2000 六角螺母 C级 ISO4034：1999 GB/T 65-2000 开槽圆柱头螺钉 ISO1207：1992 GB/T 67-2000 开槽盘头螺钉 ISO1580：1994 GB/T 68-2000 开槽沉头螺钉 ISO2009：1994 GB/T 69-2000 开槽半沉头螺钉 ISO2010：1994 GB/T 70.1-2000 内六角圆柱头螺钉 ISO4762：1997 GB/T 70.2-2000 内六角平圆头螺钉 ISO7380：1997 GB/T 70.3-2000 内六角沉头螺钉 ISO10642：1997 GB/T 77-2000 内六角平端紧定螺钉 ISO4026：1993 GB/T 78-2000 内六角锥端紧定螺钉 ISO4027：1993 GB/T 79-2000 内六角圆柱端紧定螺钉 ISO4028：1993 GB/T 80-2000 内六角凹端紧定螺钉 ISO4029：1993 GB/T 5779.1-2000 紧固件表面缺陷螺栓、螺钉和螺柱一般要求 ISO6157-1：1988 GB/T 5779.2-2000 紧固件表面缺陷螺母 ISO6157-2：1995 GB/T 5779.3-2000 紧固件表面缺陷螺栓、螺钉和螺柱特殊要求 ISO6157-3：1988 字串3 GB/T 5780-2000 六角头螺栓 C级 ISO4016：1999 GB/T 5781-2000 六角头螺栓全螺纹 C级 ISO4018：1999 GB/T 5782-2000 六角头螺栓 ISO4014：1999 GB/T 5783-2000 六角头螺栓全螺纹 ISO4017：1999 GB/T 5785-2000 六角头螺栓细牙 ISO8765：1999 GB/T 5786-2000 六角头螺栓细牙全螺纹 ISO8676：1999 GB/T 6170-2000 1 型六角螺母 ISO4032：1999
常用螺栓实用标准及规格表(终审稿)
常用螺栓实用标准及规 格表 公司内部档案编码：[OPPTR-OPPT28-OPPTL98-OPPNN08]
常用螺栓的标准及规格表 国家标准规定了螺纹规格为M3~M64,A和B级的六角头螺栓.A级用于D<=24和L<=10D或L<=150mm(按较小值)的螺栓;B级用于D>24或L>10D 或L>150(按较小值)的螺栓 外六角螺栓尺寸规格(如图) 钢结构连接用螺栓性能等级分、、、、、、、、等10余个等级，其中级及以上螺栓材质为低碳合金钢或中碳钢并经热处理（淬火、回火），通称为高强度螺栓，其余通称为普通螺栓。螺栓性能等级标号有两部分数字组成，分别表示螺栓材料的公称抗拉强度值和屈强比值。例如，性能等级级的螺栓，其含义是： 1、螺栓材质公称抗拉强度达400MPa级； 2、螺栓材质的屈强比值为； 3、螺栓材质的公称屈服强度达400×=240MPa级性能等级级高强度螺栓，其材料经过热处理后，能达到： 1、螺栓材质公称抗拉强度达1000MPa级； 2、螺栓材质的屈强比值为； 3、螺栓材质的公称屈服强度达1000×=900MPa级
螺栓性能等级的含义是国际通用的标准，相同性能等级的螺栓，不管其材料和产地的区别，其性能是相同的，设计上只选用性能等级即可。 常用螺丝规格表
强度等级所谓级和级 是指螺栓的抗剪切应力等级为和 公称抗拉强度800N/MM2 公称屈服强度640N/MM2 一般的螺栓是用""表示强度的， X*100=此螺栓的抗拉强度， X*100*（Y/10）=此螺栓的屈服强度 （因为按标识规定：屈服强度/抗拉强度=Y/10） =============== 如级 则此螺栓的 抗拉强度为：400MPa 屈服强度为：400*8/10=320MPa ================= 另：不锈钢螺栓通常标为A4-70，A2-70的样子，意义另有解释度量
规范 常用螺栓的标准及规格表
常用螺栓的标准及规格表 国家标准规定了螺纹规格为M3~M64,A和B级的六角头螺栓.A级用于D<=24和L<=10D或L<=150mm(按较小值)的螺栓;B级用于D>24或L>10D或L>150(按较小值)的螺栓 外六角螺栓尺寸规格(如图) 钢结构连接用螺栓性能等级分 3.6、4.6、4.8、5.6、6.8、8.8、9.8、10.9、12.9等10余个等级，其中8.8级及以上螺栓材质为低碳合金钢或中碳钢并经热处理（淬火、回火），通称 为高强度螺栓，其余通称为普通螺栓。螺栓性能等级标号有两部分数字组成，分别表示螺 栓材料的公称抗拉强度值和屈强比值。 例如，性能等级 4.6级的螺栓，其含义是： 1、螺栓材质公称抗拉强度达400MPa级； 2、螺栓材质的屈强比值为0.6； 3、螺栓材质的公称屈服强度达400×0.6=240MPa级
性能等级10.9级高强度螺栓，其材料经过热处理后，能达到： 1、螺栓材质公称抗拉强度达1000MPa级； 2、螺栓材质的屈强比值为0.9； 3、螺栓材质的公称屈服强度达1000×0.9=900MPa级 螺栓性能等级的含义是国际通用的标准，相同性能等级的螺栓，不管其材料和产地的区别，其性能是相同的，设计上只选用性能等级即可。 常用螺丝规格表 类别规格牙距 成品外径线径 类 别 规格 牙数 (每 英 寸) 成品外径线径最大最小±0.02mm 最大最小±0.02mm 国 标 粗 牙60° M1.4 0.30 1.38 1.34 1.16 英 制 粗 牙 55° 1/8 40 3.145 3.03 2.70 M1.7 0.35 1.68 1.61 1.42 5/32 32 3.945 3.795 3.38 M2.0 0.40 1.98 1.89 1.68 3/16 24 4.732 4.592 4.00 M2.3 0.40 2.28 2.19 1.98 1/4 20 6.32 6.165 5.45 M2.5 0.45 2.48 2.38 2.15 5/16 18 7.905 7.737 6.94 M3.0 0.50 2.98 2.88 2.60 3/8 16 9.49 9.312 8.40 M3.5 0.60 3.47 3.36 3.02 7/16 14 11.07 10.88 9.84 M4.0 0.70 3.98 3.83 3.40 1/2 12 12.66 12.46 11.22 M4.5 0.75 4.47 4.36 3.88 9/16 12 14.25 14.04 12.81 M5.0 0.80 4.98 4.83 4.30 5/8 11 15.83 15.61 14.27 M6.0 1.00 5.97 5.82 5.18 美 制 粗 牙 60° 4# 40 2.824 2.695 2.37 M7.0 1.00 6.97 6.82 6.18 5# 40 3.154 3.026 2.69 M8.0 1.25 7.96 7.79 7.02 6# 32 3.484 3.333 2.91 M9.0 1.25 8.96 8.79 8.01 8# 32 4.142 3.991 3.57 M10 1.50 9.96 9.77 8.84 10# 24 4.8 4.618 4.05 M11 1.50 10.97 10.73 9.84 12# 24 5.461 5.279 4.70 M12 1.75 11.95 11.76 10.7 1/4 20 6.322 6.117 5.45 M14 2.00 13.95 13.74 12.5 5/16 18 7.907 7.687 6.93 M16 2.00 15.95 15.74 14.5 3/8 16 9.491 9.254 8.40 M18 2.50 17.95 17.71 16.2 7/16 14 11.08 10.82 9.83 M20 2.50 19.95 19.71 18.2 1/2 13 12.66 12.39 11.32 国 标 细 牙60° M4.0 0.50 3.97 3.86 3.58 9/16 12 14.25 13.96 12.80 M4.5 0.50 4.47 4.36 4.07 5/8 11 15.83 15.53 14.26 M5.0 0.50 4.97 4.86 4.57 美 制 粗 牙 60° 4# 48 2.877 2.713 2.44 M6.0 0.75 5.97 5.85 5.41 5# 44 3.157 3.036 2.73 M7.0 0.75 6.97 6.85 6.41 6# 40 3.484 3.356 3.02 M8.0 1.00 7.97 7.83 7.24 8# 36 4.145 4.006 3.63 M9.0 1.00 8.97 8.83 8.24 10# 32 4.803 4.651 4.23 M10 1.00 9.97 9.82 9.23 12# 28 5.461 5.296 4.81 M10 1.25 9.96 9.81 9.07 1/4 28 6.324 6.16 5.68
现行螺栓国家标准.doc
现行螺栓国家标准标准号标准名称 GB/T 10-1988 沉头方颈螺栓 GB/T 11-1988 沉头带榫螺栓 GB/T 12-1988 半圆头方颈螺栓 GB/T 1228-2006 钢结构用高强度大六角头螺栓 GB/T 1231-2006 钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件 GB/T 13-1988 半圆头带榫螺栓 GB/T 14-1998 大半圆头方颈螺栓 C 级 GB/T 15-1988 大半圆头带榫螺栓 GB/T 152.4-1988 紧固件六角头螺栓和六角螺母用沉孔 GB/T 158-1996 机床工作台T 形槽和相应螺栓 GB/T 16674.1-2004 六角法兰面螺栓小系列 GB/T 16674.2-2004 六角法兰面螺栓细牙小系列 GB/T 16938-1997 紧固件螺栓、螺钉、螺柱和螺母通用技术条件 GB/T 16939-1997 钢网架螺栓球节点用高强度螺栓 GB/T 18230.1-2000 栓接结构用大六角头螺栓螺纹长度按 GB/T 3106 C 级8.8 和 10.9 级 GB/T 18230.2-2000 栓接结构用大六角螺栓短螺丝长度C级 8.8和10.9级 GB/T 18230.4-2000 栓接结构用 1 型大六角螺栓B级 10级 GB/T 18230.6-2000 栓接结构用 1 型大六角螺栓热浸镀锌 (加大攻丝尺寸 )A 和 B 级 5、 6 和 8 级 GB/T 19990-2005 土壤耕作机械土壤工作
GB/T 27-1988 六角头铰制孔用螺栓A和B级 GB/T 28-1988 六角头螺杆带孔铰制孔用螺栓A和B级 GB/T 29.1-1988 六角头头部带槽螺栓A和B级 GB/T 29.2-1988 十字槽凹穴六角头螺栓 GB/T 3098.10-1993 紧固件机械性能有色金属制造的螺栓、螺钉、螺柱和螺母 GB/T 3098.1-2000 紧固件机械性能螺栓、螺钉和螺柱 GB/T 3098.13-1996 紧固件机械性能螺栓与螺钉的扭矩试验和破坏扭矩公称直径1～ 10mm GB/T 3098.6-2000 紧固件机械性能不锈钢螺栓、螺钉和螺柱 GB/T 3099-1982 螺栓、螺钉、螺母及附件名词术语 GB/T 31.1-1988 六角头螺杆带孔螺栓A和B级 GB/T 31.2-1988 六角头螺植带孔螺栓细杆 B级 GB/T 31.3-1988 六角头螺杆带孔螺栓细牙 A和B级 GB/T 3103.1-2002 紧固件公差螺栓、螺钉、螺柱和螺母 GB/T 3103.2-1982 紧固件公差用于精密机械的螺栓 ,螺钉和螺母 GB/T 3105-2002 普通螺栓和螺钉头下圆角半径 GB/T 3106-1982 螺栓 ,螺钉和螺柱的公称长度和普通螺栓的螺纹长度 GB/T 32.1-1988 六角头头部带孔螺栓A和B级 GB/T 32.2-1988 六角头头部带孔螺栓细杆 B级 GB/T 32.3-1988 六角头头部带孔螺栓细牙 A和B级 GB/T 3227-2000 螺栓和螺母用装配工具机动套筒工具的传动四方 GB/T 3228-2000 螺栓螺母用装配工具冲击式机动四方传动套筒的尺寸 GB/T 3229-2000 螺栓和螺母用装配工具机动螺刀头的六角传动端 GB/T 35-1988 小方头螺栓 B 级 GB/T 3632-1995 钢结构用扭剪型高强度螺栓连接副 GB/T 3633-1995 钢结构用扭剪型高强度螺栓连接副技术条件 GB/T 37-1988 T 型槽用螺栓 GB/T 3750.3-1983 卡套式铰接六角螺栓 GB/T 5276-1985 紧固件螺栓、螺钉、螺柱及螺母尺寸代号和标注 GB/T 5277-1985 紧固件螺栓和螺钉通孔 GB/T 5286-2001 螺栓、螺钉和螺母用平垫圈总方案 GB/T 5650-1985 扩口式管接头空心螺栓 GB/T 5779.1-2000 紧固件表面缺陷螺栓、螺钉和螺柱一般要求 GB/T 5779.3-2000 紧固件表面缺陷螺栓、螺钉和螺柱特殊要求 GB/T 5780-2000 六角头螺栓 C 级 GB/T 5781-2000 六角头螺栓全螺纹 C级 GB/T 5782-2000 六角头螺栓 GB/T 5783-2000 六角头螺栓全螺纹 GB/T 5784-1986 六角头螺栓细杆 B级 GB/T 5785-2000 六角头螺栓细牙
螺栓国标大全
. 螺栓 方头螺栓 C级 GB 8-88 沉头方颈螺栓 GB 10-88 沉头带榫螺拴 GB 11-88 半圆头方颈螺栓 GB 12-88 半圆头带榫螺栓 GB 13-88 大半圆头方颈螺栓 C级 GB 14-1998 大半圆头带榫螺栓 GB 15-88 六角头铰制孔用螺栓 GB 27-88 六角头螺杆带孔铰制孔用螺栓 GB 28-88 六角头头部带槽螺栓 A 和 B 级 GB 29.1-88 十字槽凹穴六角头螺栓 GB 29.2-88 六角头螺杆带孔螺栓 GB 31.1-88 六角头螺杆带孔螺栓细杆 B级 GB 31.2-88 六角头螺杆带孔螺栓细牙 A和B级 GB 31.3-88 六角头头部带孔螺栓 A 和 B级 GB 32.1-88 六角头头部带孔螺栓细杆 B级 GB 32.2-88 六角头头部带孔螺栓细牙 A 和 B 级 GB 32.3-88 下方头螺栓 B级 GB 35-88 T 形槽用螺栓 GB 37-88 加强半圆头方颈螺栓 GB /T794-93 活节螺栓 GB 798-88 地脚螺栓 GB 799-88 沉头双榫螺 GB 800-88 小圆半头低方颈螺栓 B级 GB /T 801-1998 六角头螺栓 C级 GB /T 5780-2000 六角头螺栓全螺纹 C级 GB /T 5781-2000 六角头螺栓 GB /T 5782-2000 六角头螺栓全螺纹 GB /T 5783-2000 六角头螺栓-细杆-B级 GB 5784-86 六角头螺栓细牙 GB /T 5785-2000 六角头螺栓细牙全螺纹 GB /T 5786-2000 六角法兰面螺栓-加大系列-B级 GB 5789-86 六角法兰面螺栓-加大系列-细杆-B级 GB 5790-86 六角法兰面螺栓小系列 GB /T 16674-1996 钢网架螺栓球节点用高强度螺栓 GB /T 16939-1997 本文版权所属标准件之都网，如需转载、摘编或以其它方式使用本文内容，请在授权范围内使用，并标注“来源：标准件之都” '.
螺栓国家标准
螺柱常用国家标准 GB27六角头铰制孔用螺栓 GB70内六角园柱头螺钉 GB798活节螺栓（粗制） GB799地脚螺栓（粗制） GB897、GB898、GB899、GB900双头螺柱 GB901等长双头螺柱GB953等长双头螺柱（粗制） GB5780六角头螺栓——C级 GB5781六角头螺栓——全螺纹—C级 GB5782六角头螺栓——A、B级 GB5783六角头螺栓——全螺纹—A、B级 GB5784六角头螺栓——细杆—B级 GB5785六角头螺栓——A、B级 GB5786六角头螺栓——细牙—全螺纹—A、B级 GB5787六角法兰面螺栓——B级 GB5788六角法兰面螺栓——细杆—B级 GB5789六角法兰面螺栓——加大系列—B级 GB5790六角法兰面螺栓—加大系列—细杆—B级 GB1228大六角头螺栓（钢结构用高强度） 螺母常用国家标准 GB41 Ⅰ型六角螺母——C级 GB6170 Ⅰ型六角螺母——A、B级 GB6171Ⅰ型六角螺母—细牙—A、B级 GB6172六角薄螺母——A、B级—倒角 GB6173六角薄螺母——细牙—A、B级 GB6174六角薄螺母——B级—无倒角 GB6175Ⅱ型六角螺母——A、B级 GB6176Ⅱ型六角螺母——细牙—A、B级 GB6177六角法兰面螺母—A级 GB56六角厚螺母 GB1229大六角螺母（钢结构用高强度） 螺栓螺柱企标、部标外标 HG20613钢制管法兰用紧固件标准（美洲体系） HG20634钢制管法兰用紧固件标准（欧洲体系） SHJ404-88管法兰用紧固件（中石化公司） HGJ75-91化工机械部标准（螺栓、螺柱、螺母） HGJ524-91/A1-1化学工业部标准（公制管用，U型螺栓）