LANF中文资料

FEATURES

● Low Ripple and Noise

● Single and Dual Output

● Ultra Miniature SIP: 12 Pin

● RoHS Approved Type Available

● Regulated and Non-Regulated Versions Available

● Two Levels of I/O Isolation Available: 500VDC or 3KVDC

SPECIFICATIONS: LAN F Series

All specifications apply @ ±25°C ambient unless otherwise noted

INPUT SPECIFICATIONS

Input Voltage Range.......5V nom. input..................4.5 – 5.5VDC

12V nom. input............10.8 – 13.2VDC

15V nom. input............13.5 – 16.5VDC

24V nom. input............21.6 – 26.4VDC Input Filter...................................................................Pi Network. OUTPUT SPECIFICATIONS

Output Current................................................................see table Output Voltage................................................................see table Voltage Tolerance (nom. Line 100% load).. (5)

Line Regulation

Regulated...............................................................±0.5% max. Non-Regulated.................................................±1.2%/% of Vin Load Regulation

Regulated.......................................................................±0.5% Non-Regulated (load 20% to 100%).. (10)

Ripple/Noise (20 MHz BW)....................................50mVp-p max. PROTECTION

Short Circuit Protection.................................................Continuous GENERAL SPECIFICATIONS

Efficiency

Regulated...........................................................55 to 65% typ. Non-Regulated....................................................70 to 75% typ. Switching Frequency....................................................20KHz min. Isolation Voltage (input to output).................500VDC or 3000VDC ENVIRONMENTAL SPECIFICATIONS

Operating Temperature..........................................-25°C to +71°C Storage Temperature.............................................-40°C to+100°C Cooling.............................................................Free air convection PHYSICAL SPECIFICATIONS Dimensions..............................1.25(L) x 0.34(W) x 0.57(H) inches Case Material.....................................Non-conductive black plastic

Due to advances in technology, specifications subject to change without notice

OUTPUT VOLTAGE / CURRENT RATING CHART

Model (See Note 2) Input Voltage Range Output Voltage

Output Current

LANF505N 5 VDC 300 mA LANF509N 9 VDC 170 mA LANF512N 12 VDC 125 mA LAN5515N 15 VDC 100 mA LANF524N 24 VDC 65 mA LANF505ND ±5 VDC 100 mA LANF512ND ±12 VDC 60 mA LAN5515ND 5 VDC 4.5 – 5.5 VDC

±15 VDC 50 mA LANF1205N 5 VDC 300 mA LANF1209N 9 VDC 170 mA LANF1212N 12 VDC 125 mA LANF1215N 15 VDC 100 mA LANF1224N 24 VDC 65 mA LANF1205ND ±5 VDC 100 mA LANF1212ND ±12 VDC 60 mA LANF1215ND 12 VDC 10.8 – 13.2 VDC

±15 VDC 50 mA LANF1505N 5 VDC 300 mA LANF1509N 9 VDC 170 mA LANF1512N 12 VDC 125 mA LANF1515N 15 VDC 100 mA LANF1524N 24 VDC 65 mA LANF1505ND ±5 VDC 100 mA LANF1512ND ±12 VDC 60 mA LANF1515ND 15 VDC 13.5 – 16.5 VDC

±15 VDC 50 mA LANF2405N 5 VDC 300 mA LANF2409N 9 VDC 170 mA LANF2412N 12 VDC 125 mA LANF2415N 15 VDC 100 mA LANF2424N 24 VDC 65 mA LANF2405ND ±5 VDC 100 mA LANF2412ND ±12 VDC 60 mA LANF2415ND

24 VDC 21.6 – 26.4 VDC

±15 VDC

50 mA

NOTES

1. All case and pin-to-case dimensions reference only unless otherwise noted.

2. All LANF models can be regulated, substitute “R” for “N” in last digits of part number (Ex: LANF2415R).

3. Add “H” onto the end of LANF part number for 3000VDC isolation (Ex: LANF2415NH).

4. For RoHS type add the suffix “-NL” to part number (Ex: LANF2415N-NL).

MECHANICAL DRAWINGS

PIN CONNECTION

PIN SINGLE OUTPUT DUAL OUTPUT

1 +INPUT +INPUT

2 NC -OUTPUT

9 NC NC

10 -OUTPUT COM

11 +OUTPUT +OUTPUT

12 -INPUT -INPUT