电子信息工程外文翻译-外文文献-英文文献

电子信息工程电路编程中的AT89C51单片机

红外数据通信技术外文翻译文献

红外数据通信技术外文翻译文献(文档含中英文对照即英文原文和中文翻译) Infrared Remote Control System Abstract Red outside data correspondence the technique be currently within the scope of world drive extensive usage of a kind of wireless conjunction technique, drive numerous hardware and software platform support. Red outside the transceiver product have cost low, small scaled turn, the baud rate be quick, point to point SSL, be free from electromagnetism thousand Raos

etc. characteristics, can realization information at dissimilarity of the product fast, convenience, safely exchange and transmission, at short distance wireless deliver aspect to own very obvious of advantage. Along with red outside the data deliver a technique more and more mature, the cost descend, red outside the transceiver necessarily will get at the short distance communication realm more extensive of application. The purpose that design this system is transmit customer’s operation information with infrared rays for transmit media, then demodulate original signal with receive circuit. It use coding chip to modulate signal and use decoding chip to demodulate signal. The coding chip is PT2262 and decoding chip is PT2272. Both chips are made in Taiwan. Main work principle is that we provide to input the information for the PT2262 with coding keyboard. The input information was coded by PT2262 and loading to high frequent load wave whose frequent is 38 kHz, then modulate infrared transmit dioxide and radiate space outside when it attian enough power. The receive circuit receive the signal and demodulate original information. The original signal was decoded by PT2272, so as to drive some circuit to accomplish customer’s operation demand. Keywords: Infrared dray；Code；Decoding；LM386；Red outside transceiver 1 Introduction 1.1 research the background and significance Infrared Data Communication Technology is the world wide use of a wireless connection technology, by the many hardware and software platforms supported. Is a data through electrical pulses and infrared optical pulse switch between the wireless data transceiver technology.

土木工程类专业英文文献及翻译

PA VEMENT PROBLEMS CAUSED BY COLLAPSIBLE SUBGRADES By Sandra L. Houston,1 Associate Member, ASCE (Reviewed by the Highway Division) ABSTRACT: Problem subgrade materials consisting of collapsible soils are com- mon in arid environments, which have climatic conditions and depositional and weathering processes favorable to their formation. Included herein is a discussion of predictive techniques that use commonly available laboratory equipment and testing methods for obtaining reliable estimates of the volume change for these problem soils. A method for predicting relevant stresses and corresponding collapse strains for typical pavement subgrades is presented. Relatively simple methods of evaluating potential volume change, based on results of familiar laboratory tests, are used. INTRODUCTION When a soil is given free access to water, it may decrease in volume, increase in volume, or do nothing. A soil that increases in volume is called a swelling or expansive soil, and a soil that decreases in volume is called a collapsible soil. The amount of volume change that occurs depends on the soil type and structure, the initial soil density, the imposed stress state, and the degree and extent of wetting. Subgrade materials comprised of soils that change volume upon wetting have caused distress to highways since the be- ginning of the professional practice and have cost many millions of dollars in roadway repairs. The prediction of the volume changes that may occur in the field is the first step in making an economic decision for dealing with these problem subgrade materials. Each project will have different design considerations, economic con- straints, and risk factors that will have to be taken into account. However, with a reliable method for making volume change predictions, the best design relative to the subgrade soils becomes a matter of economic comparison, and a much more rational design approach may be made. For example, typical techniques for dealing with expansive clays include: (1) In situ treatments with substances such as lime, cement, or fly-ash; (2) seepage barriers and/ or drainage systems; or (3) a computing of the serviceability loss and a mod- ification of the design to "accept" the anticipated expansion. In order to make the most economical decision, the amount of volume change (especially non- uniform volume change) must be accurately estimated, and the degree of road roughness evaluated from these data. Similarly, alternative design techniques are available for any roadway problem. The emphasis here will be placed on presenting economical and simple methods for: (1) Determining whether the subgrade materials are collapsible; and (2) estimating the amount of volume change that is likely to occur in the 'Asst. Prof., Ctr. for Advanced Res. in Transp., Arizona State Univ., Tempe, AZ 85287. Note. Discussion open until April 1, 1989. To extend the closing date one month,

英文文献翻译

中等分辨率制备分离的 快速色谱技术 W. Clark Still,* Michael K a h n , and Abhijit Mitra Departm(7nt o/ Chemistry, Columbia Uniuersity,1Veu York, Neu; York 10027 ReceiLied January 26, 1978 我们希望找到一种简单的吸附色谱技术用于有机化合物的常规净化。这种技术是适于传统的有机物大规模制备分离，该技术需使用长柱色谱法。尽管这种技术得到的效果非常好，但是其需要消耗大量的时间，并且由于频带拖尾经常出现低复原率。当分离的样本剂量大于1或者2g时，这些问题显得更加突出。近年来，几种制备系统已经进行了改进，能将分离时间减少到1-3h，并允许各成分的分辨率ΔR f≥（使用薄层色谱分析进行分析）。在这些方法中，在我们的实验室中，媒介压力色谱法1和短柱色谱法2是最成功的。最近，我们发现一种可以将分离速度大幅度提升的技术，可用于反应产物的常规提纯，我们将这种技术称为急骤色谱法。虽然这种技术的分辨率只是中等（ΔR f≥），而且构建这个系统花费非常低，并且能在10-15min内分离重量在的样本。4 急骤色谱法是以空气压力驱动的混合介质压力以及短柱色谱法为基础，专门针对快速分离，介质压力以及短柱色谱已经进行了优化。优化实验是在一组标准条件5下进行的，优化实验使用苯甲醇作为样本，放在一个20mm*5in.的硅胶柱60内，使用Tracor 970紫外检测器监测圆柱的输出。分辨率通过持续时间（r）和峰宽（w,w/2）的比率进行测定的（Figure 1），结果如图2-4所示，图2-4分别放映分辨率随着硅胶颗粒大小、洗脱液流速和样本大小的变化。

电子信息工程专业课程翻译中英文对照表

电子信息工程专业课程名称中英文翻译对照 （2009级培养计划）

实践环节翻译

高等数学Advanced Mathematics 大学物理College Physics 线性代数Linear Algebra 复变函数与积分变换Functions of Complex Variable and Integral Transforms 概率论与随机过程Probability and Random Process 物理实验Experiments of College Physics 数理方程Equations of Mathematical Physics 电子信息工程概论Introduction to Electronic and Information Engineering 计算机应用基础Fundamentals of Computer Application 电路原理Principles of Circuit 模拟电子技术基础Fundamentals of Analog Electronics 数字电子技术基础Fundamentals of Digital Electronics C语言程序设计The C Programming Language 信息论基础Fundamentals of Information Theory 信号与线性系统Signals and Linear Systems 微机原理与接口技术Microcomputer Principles and Interface Technology 马克思主义基本原理Fundamentals of Marxism 毛泽东思想、邓小平理论 和“三个代表”重要思想 概论 Thoughts of Mao and Deng 中国近现代史纲要Modern Chinese History 思想道德修养与法律基 础 Moral Education & Law Basis 形势与政策Situation and Policy 英语College English 体育Physical Education 当代世界经济与政治Modern Global Economy and Politics 卫生健康教育Health Education 心理健康知识讲座Psychological Health Knowledge Lecture 公共艺术课程Public Arts 文献检索Literature Retrieval 军事理论Military Theory 普通话语音常识及训练Mandarin Knowledge and Training 大学生职业生涯策划 （就业指导） Career Planning (Guidance of Employment ) 专题学术讲座Optional Course Lecture 科技文献写作Sci-tech Document Writing 高频电子线路High-Frequency Electronic Circuits 通信原理Communications Theory 数字信号处理Digital Signal Processing 计算机网络Computer Networks 电磁场与微波技术Electromagnetic Field and Microwave

土木工程外文翻译

转型衰退时期的土木工程研究 Sergios Lambropoulosa[1], John-Paris Pantouvakisb, Marina Marinellic 摘要 最近的全球经济和金融危机导致许多国家的经济陷入衰退，特别是在欧盟的周边。这些国家目前面临的民用建筑基础设施的公共投资和私人投资显著收缩，导致在民事特别是在民用建筑方向的失业。因此，在所有国家在经济衰退的专业发展对于土木工程应届毕业生来说是努力和资历的不相称的研究，因为他们很少有机会在实践中积累经验和知识，这些逐渐成为过时的经验和知识。在这种情况下，对于技术性大学在国家经济衰退的计划和实施的土木工程研究大纲的一个实质性的改革势在必行。目的是使毕业生拓宽他们的专业活动的范围，提高他们的就业能力。 在本文中，提出了土木工程研究课程的不断扩大，特别是在发展的光毕业生的潜在的项目，计划和投资组合管理。在这个方向上，一个全面的文献回顾，包括ASCE体为第二十一世纪，IPMA的能力的基础知识，建议在其他：显著增加所提供的模块和项目管理在战略管理中添加新的模块，领导行为，配送管理，组织和环境等；提供足够的专业训练五年的大学的研究；并由专业机构促进应届大学生认证。建议通过改革教学大纲为土木工程研究目前由国家技术提供了例证雅典大学。 1引言 土木工程研究（CES）蓬勃发展，是在第二次世界大战后。土木工程师的出现最初是由重建被摧毁的巨大需求所致，目的是更多和更好的社会追求。但是很快，这种演变一个长期的趋势，因为政府为了努力实现经济发展，采取了全世界的凯恩斯主义的理论，即公共基础设施投资作为动力。首先积极的结果导致公民为了更好的生活条件（住房，旅游等）和增加私人投资基础设施而创造机会。这些现象再国家的发展中尤为为明显。虽然前景并不明朗（例如，世界石油危机在70年代），在80年代领先的国家采用新自由主义经济的方法（如里根经济政策），这是最近的金融危机及金融危机造成的后果（即收缩的基础设施投资，在技术部门的高失业率），消除发展前途无限的误区。 技术教育的大学所认可的大量研究土木工程部。旧学校拓展专业并且新的学校建成，并招收许多学生。由于高的职业声望，薪酬，吸引高质量的学校的学生。在工程量的增加和科学技术的发展，导致到极强的专业性，无论是在研究还是工作当中。结构工程师，液压工程师，交通工程师等，都属于土木工程。试图在不同的国家采用专业性的权利，不同的解决方案，，从一个统一的大学学历和广泛的专业化的一般职业许可证。这个问题在许多其他行业成为关键。国际专业协会的专家和机构所确定的国家性检查机构，经过考试后，他们证明不仅是行业的新来者，而且专家通过时间来确定进展情况。尽管在很多情况下，这些证书虽然没有国家接受，他们赞赏和公认的世界。 在试图改革大学研究（不仅在土木工程）更接近市场需求的过程中，欧盟确定了1999博洛尼亚宣言，它引入了一个二能级系统。第一级度（例如，一个三年的学士）是进入

通信工程项目毕业材料外文翻译

用于多跳认知无线电网络的分布式网络编码控制信道 Alfred Asterjadhi等著 1 前言 大多数电磁频谱由政府机构长期指定给公司或机构专门用于区域或国家地区。由于这种资源的静态分配，许可频谱的许多部分在许多时间和/或位置未使用或未被充分利用。另一方面，几种最近的无线技术在诸如IEEE802.11，蓝牙，Zigbee之类的非许可频段中运行，并且在一定程度上对WiMAX进行操作;这些技术已经看到这样的成功和扩散，他们正在访问的频谱- 主要是2.4 GHz ISM频段- 已经过度拥挤。为了为这些现有技术提供更多的频谱资源，并且允许替代和创新技术的潜在开发，最近已经提出允许被许可的设备（称为次要用户）访问那些许可的频谱资源，主要用户未被使用或零星地使用。这种方法通常被称为动态频谱接入（DSA），无线电设备发现和机会性利用未使用或未充分利用的频谱带的能力通常称为认知无线电（CR）技术。 DSA和CR最近都引起了无线通信和网络界的极大关注。通常设想两种主要应用。第一个是认知无线接入（CW A），根据该认知接入点，认知接入点负责识别未使用的许可频谱，并使用它来提供对次用户的接入。第二个应用是我们在这个技术中研究的应用，它是认知自组织网络（CAN），也就是使用 用于二级用户本身之间通信的无许可频谱，用于诸如点对点内容分发，环境监控，安全性等目的，灾难恢复情景通信，军事通信等等。 设计CAN系统比CW A有更多困难，主要有两个原因。第一是识别未使用的频谱。在CW A中，接入点的作用是连接到互联网，因此可以使用简单的策略来推断频谱可用性，例如查询频谱调节器在其地理位置的频谱可用性或直接与主用户协商频谱可用性或一些中间频谱经纪人另一方面，在CAN中，与频谱调节器或主要用户的缺乏直接通信需要二级用户能够使用检测技术自己识别未使用的频谱。第二个困难是辅助用户协调媒体访问目的。在CW A中存在接入点和通常所有二级用户直接与之通信（即，网络是单跳）的事实使得直接使用集中式媒体接入控制（MAC）解决方案，如时分多址（TDMA）或正交频分多址（OFDMA）。相反，预计CAN将跨越多跳，缺少集中控制器;而对于传统的单通道多跳自组织网络而言，这个问题的几个解决方案是已知的，因为假设我们处理允许设备访问的具有成

土木工程岩土类毕业设计外文翻译

姓名： 学号： 10447425 X X 大学 毕业设计（论文）外文翻译 （2014届） 外文题目Developments in excavation bracing systems 译文题目开挖工程支撑体系的发展 外文出处Tunnelling and Underground Space Technology 31 (2012) 107–116 学生XXX 学院XXXX 专业班级XXXXX 校内指导教师XXX 专业技术职务XXXXX 校外指导老师专业技术职务 二○一三年十二月

开挖工程支撑体系的发展 1.引言 几乎所有土木工程建设项目（如建筑物，道路，隧道，桥梁，污水处理厂，管道，下水道）都涉及泥土挖掘的一些工程量。往往由于由相邻的结构，特性线，或使用权空间的限制，必须要一个土地固定系统，以允许土壤被挖掘到所需的深度。历史上，许多挖掘支撑系统已经开发出来。其中，现在比较常见的几种方法是：板桩，钻孔桩墙，泥浆墙。 土地固定系统的选择是由技术性能要求和施工可行性（例如手段，方法）决定的，包括执行的可靠性，而成本考虑了这些之后，其他问题也得到解决。通常环境后果（用于处理废泥浆和钻井液如监管要求）也非常被关注（邱阳、1998）。 土地固定系统通常是建设项目的较大的一个组成部分。如果不能按时完成项目，将极大地影响总成本。通常首先建造支撑，在许多情况下，临时支撑系统是用于支持在挖掘以允许进行不断施工，直到永久系统被构造。临时系统可以被去除或留在原处。 打桩时，因撞击或振动它们可能会被赶入到位。在一般情况下，振动是最昂贵的方法，但只适合于松散颗粒材料，土壤中具有较高电阻（例如，通过鹅卵石）的不能使用。采用打入桩系统通常是中间的成本和适合于软沉积物（包括粘性和非粘性），只要该矿床是免费的鹅卵石或更大的岩石。 通常，垂直元素（例如桩）的前安装挖掘工程和水平元件（如内部支撑或绑回）被安装为挖掘工程的进行下去，从而限制了跨距长度，以便减少在垂直开发弯矩元素。在填充情况下，桩可先设置，从在斜坡的底部其嵌入悬挑起来，安装作为填充进步水平元素（如搭背或土钉）。如果滞后是用来保持垂直元素之间的土壤中，它被安装为挖掘工程的进行下去，或之前以填补位置。 吉尔- 马丁等人（2010）提供了一个数值计算程序，以获取圆形桩承受轴向载荷和统一标志（如悬臂桩）的单轴弯矩的最佳纵筋。他们开发的两种优化流程：用一个或两个直径为纵向钢筋。优化增强模式允许大量减少的设计要求钢筋的用量，这些减少纵向钢筋可达到50％相对传统的，均匀分布的加固方案。 加固桩集中纵向钢筋最佳的位置在受拉区。除了节约钢筋，所述非对称加强钢筋图案提高抗弯刚度，通过增加转动惯量的转化部分的时刻。这种增加的刚性可能会在一段时间内增加的变形与蠕变相关的费用。评估相对于传统的非对称加强桩的优点，对称，钢筋桩被服务的条件下全面测试来完成的，这种试验是为了验证结构的可行性和取得的变形的原位测量。 基于现场试验中，用于优化的加强图案的优点浇铸钻出孔（CIDH）在巴塞罗那的

计算机网络-外文文献-外文翻译-英文文献-新技术的计算机网络

New technique of the computer network Abstract The 21 century is an ages of the information economy, being the computer network technique of representative techniques this ages, will be at very fast speed develop soon in continuously creatively, and will go deep into the people's work, life and study. Therefore, control this technique and then seem to be more to deliver the importance. Now I mainly introduce the new technique of a few networks in actuality live of application. keywords Internet Network System Digital Certificates Grid Storage 1. Foreword Internet turns 36, still a work in progress Thirty-six years after computer scientists at UCLA linked two bulky computers using a 15-foot gray cable, testing a new way for exchanging data over networks, what would ultimately become the Internet remains a work in progress. University researchers are experimenting with ways to increase its capacity and speed. Programmers are trying to imbue Web pages with intelligence. And work is underway to re-engineer the network to reduce Spam (junk mail) and security troubles. All the while threats loom: Critics warn that commercial, legal and political pressures could hinder the types of innovations that made the Internet what it is today. Stephen Crocker and Vinton Cerf were among the graduate students who joined UCLA professor Len Klein rock in an engineering lab on Sept. 2, 1969, as bits of meaningless test data flowed silently between the two computers. By January, three other "nodes" joined the fledgling network.

电子信息工程外文翻译外文文献英文文献微处理器

外文资料 所译外文资料： 1. 作者G..Bouwhuis, J.Braat, A.Huijser 2. 书名:Principles of Optical Disk Systems 3. 出版时间：1991年9月 4. 所译章节：Session 2/Chapter9, Session 2/Chapter 11 原文： Microprocessor One of the key inventions in the history of electronics, and in fact one of the most important inventions ever period, was the transistor. As time progressed after the inven ti on of LSI in tegrated circuits, the tech no logy improved and chips became smaller, faster and cheaper. The functions performed by a processor were impleme nted using several differe nt logic chips. In tel was the first compa ny to in corporate all of these logic comp onents into a si ngle chip, this was the first microprocessor. A microprocessor is a complete computati on engine that is fabricated on a sin gle chip. A microprocessor executes a collecti on of machi ne in struct ions that tell the processor what to do. Based on the in struct ions, a microprocessor does three basic things: https://www.sodocs.net/doc/3010953561.html,ing the ALU (Arithmetic/Logic Unit), a microprocessor can perform mathematical operatio ns like additi on, subtract ion, multiplicatio n and divisi on; 2.A microprocessor can move data from one memory location to another; 3.A microprocessor can make decisi ons and jump to a new set of in struct ions based on those decisi ons. There may be very sophisticated things that a microprocessor does, but those are its three basic activities. Microprocessor has an address bus that sends an address to memory, a data bus that can send data to memory or receive data from memory, an RD(read) and WR(write) line that lets a clock pulse sequenee the processor and a reset li ne that resets the program coun ter to zero(or whatever) and restarts executi on. And let ' s assume that both the address and data buses are 8 bits wide here. Here are the comp onents of this simple microprocessor: 1. Registers A, B and C are simply latches made out of flip-flops. 2. The address latch is just like registers A, B and C. 3. The program coun ter is a latch with the extra ability to in creme nt by 1 whe n told to do so, and also to reset to zero whe n told to do so. 4. The ALU could be as simple as an 8-bit adder, or it might be able to add, subtract, multiply and divide 8- bit values. Let ' s assume the latter here. 5. The test register is a special latch that can hold values from comparisons performed in the ALU. An ALU can normally compare two numbers send determine if they are equal, if one is greater

5G无线通信网络中英文对照外文翻译文献

5G无线通信网络中英文对照外文翻译文献(文档含英文原文和中文翻译)

翻译： 5G无线通信网络的蜂窝结构和关键技术 摘要 第四代无线通信系统已经或者即将在许多国家部署。然而，随着无线移动设备和服务的激增，仍然有一些挑战尤其是4G所不能容纳的，例如像频谱危机和高能量消耗。无线系统设计师们面临着满足新型无线应用对高数据速率和机动性要求的持续性增长的需求，因此他们已经开始研究被期望于2020年后就能部署的第五代无线系统。在这篇文章里面，我们提出一个有内门和外门情景之分的潜在的蜂窝结构，并且讨论了多种可行性关于5G无线通信系统的技术，比如大量的MIMO技术，节能通信，认知的广播网络和可见光通信。面临潜在技术的未知挑战也被讨论了。 介绍 信息通信技术（ICT）创新合理的使用对世界经济的提高变得越来越重要。无线通信网络在全球ICT战略中也许是最挑剔的元素，并且支撑着很多其他的行业，它是世界上成长最快最有活力的行业之一。欧洲移动天文台（EMO）报道2010年移动通信业总计税收1740亿欧元,从而超过了航空航天业和制药业。无线技术的发展大大提高了人们在商业运作和社交功能方面通信和生活的能力无线移动通信的显著成就表现在技术创新的快速步伐。从1991年二代移动通信系统(2G)的初次登场到2001年三代系统（3G）的首次起飞，无线移动网络已经实现了从一个纯粹的技术系统到一个能承载大量多媒体内容网络的转变。4G无线系统被设计出来用来满足IMT-A技术使用IP面向所有服务的需求。在4G系统中，先进的无线接口被用于正交频分复用技术（OFDM），多输入多输出系统（MIMO）和链路自适应技术。4G无线网络可支持数据速率可达1Gb/s的低流度，比如流动局域无线访问，还有速率高达100M/s的高流速，例如像移动访问。LTE系统和它的延伸系统LTE-A，作为实用的4G系统已经在全球于最近期或不久的将来部署。 然而，每年仍然有戏剧性增长数量的用户支持移动宽频带系统。越来越多的

土木工程专业外文文献及翻译

（ 二 〇 一 二 年 六 月 外文文献及翻译 题 目： About Buiding on the Structure Design 学生姓名： 学 院：土木工程学院 系 别：建筑工程系 专 业：土木工程(建筑工程方向) 班 级：土木08-4班 指导教师：

英文原文： Building construction concrete crack of prevention and processing Abstract The crack problem of concrete is a widespread existence but again difficult in solve of engineering actual problem, this text carried on a study analysis to a little bit familiar crack problem in the concrete engineering, and aim at concrete the circumstance put forward some prevention, processing measure. Keyword:Concrete crack prevention processing Foreword Concrete's ising 1 kind is anticipate by the freestone bone, cement, water and other mixture but formation of the in addition material of quality brittleness not and all material.Because the concrete construction transform with oneself, control etc. a series problem, harden model of in the concrete existence numerous tiny hole, spirit cave and tiny crack, is exactly because these beginning start blemish of existence just make the concrete present one some not and all the characteristic of quality.The tiny crack is a kind of harmless crack and accept concrete heavy, defend Shen and a little bit other use function not a creation to endanger.But after the concrete be subjected to lotus carry, difference in temperature etc. function, tiny crack would continuously of expand with connect, end formation we can see without the

变电站_外文翻译_外文文献_英文文献_变电站的综合概述

英文翻译 A comprehensive overview of substations Along with the economic development and the modern industry developments of quick rising, the design of the power supply system become more and more completely and system. Because the quickly increase electricity of factories, it also increases seriously to the dependable index of the economic condition, power supply in quantity. Therefore they need the higher and more perfect request to the power supply. Whether Design reasonable, not only affect directly the base investment and circulate the expenses with have the metal depletion in colour metal, but also will reflect the dependable in power supply and the safe in many facts. In a word, it is close with the economic performance and the safety of the people. The substation is an importance part of the electric power system, it is consisted of the electric appliances equipments and the Transmission and the Distribution. It obtains the electric power from the electric power system, through its function of transformation and assign, transport and safety. Then transport the power to every place with safe, dependable, and economical. As an important part of power’s transport and control, the transformer substation must change the mode of the traditional design and control, then can adapt to the modern electric power system, the development of modern industry and the of trend of the society life. Electric power industry is one of the foundations of national industry and national economic development to industry, it is a coal, oil, natural gas, hydropower, nuclear power, wind power and other energy conversion into electrical energy of the secondary energy industry, it for the other departments of the national economy fast and stable development of the provision of adequate power, and its level of development is a reflection of the country's economic development an important indicator of the level. As the power in the industry and the importance of the national economy, electricity transmission and distribution of electric energy used in these areas is an indispensable component.。Therefore, power transmission and distribution is critical. Substation is to enable superior power plant power plants or power after adjustments to the lower load of books is an important part of power transmission. Operation of its functions, the capacity of a direct impact on the size of the lower load power, thereby affecting the industrial production and power consumption.Substation system if a link failure, the system will protect the part of action. May result in power outages and so on, to the production and living a great disadvantage. Therefore, the substation in the electric power system for the protection of electricity reliability,