机械专业课英文介绍
发动机构造
在这门课程中，我们学习了汽车发动机的基本结构，其中以活塞往复式发动机为重点，了解到发动机中各机构系统的工作原理。其中包括发动机机体、曲柄连杆机构、配气机构、燃油供给系统、进排气系统、润滑系统、冷却系统、汽油机点火系统、起动系统。最后老师还给我们介绍了几种清洁燃料发动机，比如天燃气发动机、液化石油气发动机。
Engine construction
In this course, we learned the basic structure of engine, focusing on piston reciprocating engine and learned the operating principle of its mechanism. This includes the engine body, connecting rod, valve gear, fuel supply system, air filters, lubricating system, cooling system, ignition system of gasoline engine and starter system. In addition, the teacher introduced to us several types of purified energy engines, such as natural gas engine and liquefied petroleum gas engine.
汽车底盘构造
这门课主要分为四个部分：传动系统、行驶系统、转向系统和制动系统、汽车车身仪表照明及附属装置。传统系统中包括离合器、变速器与分动器、万向传动装置、驱动桥；行驶系统中包括车身、车桥和车轮、悬架装置。
Automobile chassis
This course is made up of four parts: drive system, running gear system, steering and braking system and auto-body lighting device and auxiliary device. The running gear system includes clutch, speed changer and transfer box, universal shaft coupling and drive axle. The running gear system includes body, axle and wheels, and suspension. 《电工和电子技术》这门课程分为两个部分，我们用两个学期来学习它。在第四学期的这门课主要描述了电路的基本概念、基本定律及分析方法、正弦交流电路、三相交流电路。在第五学期我们学了半导体基础知识、交流放大电路、逻辑电路、模拟电路和数字电路的转换。
It took us two semesters to learn Electrical engineering and electronic technology. It was my fourth and fifth semesters in college. In the fourth semester, it was the fundamental concept, laws and analysis methods of electro-circuit, sine AC circuit, and three phase AC circuit. In the fifth semester, we learned fundamental knowledge of semiconductors, AC circuit amplifier, and the switching among logic circuit, analog circuit and digital circuit.
《汽车理论》这门课程主要分析了汽车的各个使用性能的评价指标和评价方法，研究了汽车整体及其部件的结构参数对各个使用性能的影响并建立了有关的动力学方程。这门课主要介绍了汽车的动力性、汽车的燃油经济性、汽车动力参数选定、汽车的制动性、汽车操纵稳定性、汽车舒适性和汽车的通过性。Automobile theories, this course is about the indicators and methods of evaluation on operational performance. It studies the structural parameters’influence on operational performance and forms their respective dynamical equations. It introduces the dynamics, fuel economy, selection of dynamic parameters, braking performance, handling stability, comfort and pass ability of vehicles
《汽车检测与维修》这门课程学完之后，我们学院提供给我们一次车辆检测实习。
实习分成两个部分，第一部分是发动机故障的检测，它包括：1、发动机功率的检测2、点火系统的检测3、润滑系统的检测4、发动机冷却系统的检测。第二部分是底盘故障的检测。它包括：1、传动系统的检测2、转向系统的检测3、悬架系统的检测4、制动系统的检测。通过这次实习，我学到了汽车检测的基础知识和检测方法，以及现代汽车检测设备。
After learning vehicle testing and maintenance, our school gave us a chance of practice on vehicle testing. It had two parts. The first part is to detect engine failure, including the testing of 1. engine power 2. Ignition system 3. lubrication system,4 engine cooling system. The second part is to check out chassis troubles, including the test of 1. The drive system, 2. Steering system 3. Suspension system 4. Braking system. Through this practice, I learned the basic knowledge and methods of vehicle testing and some modern testing facilities.
《机械设计基础》这门课程分为机械原理和机械设计，我们学校分为两个学期上课。它主要讲述了机械中常见的机构和通用零件的工作原理、结构特点、基本的设计理论和计算方法。
机械设计基础分为两个部分：s
机械原理：1、平面机构的自由度和速度的分析2、平面连杆机构3、凸轮轴机构4、齿轮机构5、轮系
机械设计：1、机械零件设计2、零件的连接3、齿轮传动4、蜗杆传动5、带传动和链传动6、轴7、滑动轴承8、滚动轴承
Basis of mechanical designing is divided into principle of mechanics and mechanic designing. It took us two semesters to learn it. It describes the operational principle, construction features, basic designing theories and computing methods of common mechanisms and universal parts. This course is made of two parts. Principles of mechanics: 1. Freedom and speed analysis of planar mechanism 2. Planar linkage 3. Camshaft gear 4. Gear mechanism 5. Gear train
Mechanic designing: 1. parts designing 2. Parts interconnect 3. Gear drive 4. Worm drive 5. Belt drive and chain drive 6. Axle 7 slide bearing 8. Rolling bearing
《工程测试技术》这门课程主要讲了测试的基本原理、信号的分析和信号处理、传感器类型，测试系统的特性以及现代测试技术。
这门课主要分为以下几个部分，测试的基础知识、信号及其描述方法、测试系统的基本特性、常用传感器、信号变化及调整、机械振动测试与分析、现代测试技术。
Engineering testing technique is mainly about the fundamental principles of testing, the analysis and process of signals, sensors types, features of testing system and modern testing techniques.
This course is about basic knowledge of testing, signals and its description, fundamental features of testing system, sensors in common use, signal drift and adjustment, testing and analysis of mechanical vibration, modern testing techniques.
《汽车构造拆装实习》2009年1月份，我们学院组织了一次为期三周的汽车构造拆装实习，实习地点就在我们学校的汽车实验室。老师把我们分成了三组，第一周我们组进行了汽车发动机的拆装；第二周我们组进行了变速器、主减速器、
差速器的拆装；在第三周我们组进行了汽车制动系统和转向系统的拆装。通过本次实习，使我们掌握了汽车的拆装方法和检测方法，让我们加深了对汽车结构的了解，提高了我们的动手拆装能力，提高了我们的团队精神。
Automobile construction—the practice of automobile detaching and installing January, 2009, our school provided us a training practice of automobile detaching and installing. The location was at our school’s auto laboratory. We were divided into three groups. During the first week my group did the detaching and installing of engines. The second week we did the detaching and installing of speed changer, main reducing gear, and differential gear. The third week we did the practice on the braking system and the steering system. Through this practice, we learned the methods of detaching and installing and of testing. I had a better idea about automobile construction, my hands-on ability on detaching and installing and my teamwork spirit were improved.
交互性视景电视动画制作
这门课程是虚拟现实技术的一个应用，虚拟现实技术是模拟自然环境的交互技术，制作动画作品。我的期末考试题目是制作上海世界博览会中国馆。首先，要在网上下载一些中国馆的图片，然后用creator软件建立3D模型，最后把照片粘贴到上面，这样就完成了。大家不用到现场，就可以观看中国馆了。Interactive visual scene animation television
This course is an application of virtue reality. Virtue reality is an interactive technology simulating natural environment and producing animation products. My final exam question is to produce the Chinese pavilion of the Shanghai Expo. First, I downloaded some pictures of the Chinese pavilion from the internet. Then I made the 3D model and pasted the pictures onto it and it was done. People can view the Chinese pavilion without being on the scene.
《金工实习》在第四个学期的最后一个月，我们在学校工厂里进行了为期一个月的金工实习。通过金工实习使学生熟悉机械制造的一些过程，掌握金属加工的主要工艺和过程，熟悉各种工具的使用方法。在一个月中，我们学习了车工，铣工，钳工，数控加工，沙型铸造、热处理、焊接等等。每一周，大家都要学习两项新的技能。
We did our metal work practice in the last month of the fourth semester for a whole month in our school’s factory. Through this practice I got familiar with some processes of mechanical manufacture, learned metal processing techniques and how to use different tools. During this month, I learned lathe work, miller operating, benchwork, digital control processing, sand mold casting, heat treatment, and welding. Each week, we learned two of these skills.
《车辆检测和维修》这门课程描述了汽车检测的基础知识和检测方法，对于有故障的汽车通过检测方法，找出故障，并且排除故障使汽车恢复到正常性能。它包括汽车检测的基础知识，汽车发动机和底盘的检测方法、汽车维修工具的使用、汽车维修工艺、汽车维修方法等等。
Vehicle detection and maintenance, this course is about the fundamental knowledge and methods of vehicle detection. Using these methods, people can detect the cause of auto failure and solve it to put the vehicle back to normal. It includes fundamental knowledge of vehicle detection, how to detect engine and chassis, how
to use maintenance tools, techniques and methods of auto maintenance.
《工程材料》这门课程描述了工程材料的结构、组织和性能的基本理论和基本规律；金属材料作为重点，介绍了高分子材料、陶瓷材料、复合材料和新型材料的基本原理和工程应用。
Engineering material, this course is about fundamental theories and laws on the structure, organization and function of engineering materials. Metal material is its focus, including the theories and application of high molecular material, ceramic material, composite material and new material
AM/FM/收音机的组装
2008年的12月，我们学院组织了一次为期一周的电子工艺实习，三个人一组完成一个AM/FM收音机的组装，实习地点在我们学校电子实验室。
首先我们搜集到有关收音机的基本原理，设计电路图，电路元器件的选择和装配，我熟悉焊接原理并掌握焊接技术装配一台收音机。
通过这次电子工艺实习，我掌握了电路元件的选择、电路符号、万用表的使用、焊接技术、而且提高了我的团队意识。
Assembling AM/FM radios
My school organized one week’s practice on electronic working techniques in December, 2008. We were broken into groups of three to assemble an AM/FM radio. The location was in our school’s electronic laboratory.
Through searching knowledge on theories of radio, designing of circuit diagrams, and selection and assembling of electronic components, I got familiar with fundamentals of welding and grasped the welding techniques of assembling a radio.
This practice taught me the knowledge and skills on the selection of electronic components, circuit symbols, the using of multimeter, and welding skills. My team work spirit was improved.
《汽车营销》这门课主要讲述了汽车社会的内涵和汽车营销的基本原理。具体内容包括：汽车营销和营销管理、汽车市场调查和预测、汽车价格策略、汽车促销策略、汽车销售实务。
在课程结束后，我们学院给我们提供了两周在汽车4S店实习的机会，我们分成四组，每三天换一个汽车品牌。我们组分别在大众、奥迪、本田、丰田的4S店进行了实习，使我们更好的把理论和实践联系了起来。
Automobile marketing
This course is about the meaning of auto society and the fundamentals of automobile marketing, includes automobile marketing and management, inspection and prediction of automobile market, pricing strategies, promotion strategies, and sales practice. After finishing the course, we were given two weeks’ practice in some 4S distributors. We were divided into 4 groups and exchange to different 4S every three days. We had the practice in Volkswagen, Audi, Honda, and Toyota. It was a good chance for us to put theories into practice.
《汽车空气动力学》这门课主要讲述了汽车行驶过程中，空气与汽车相对运动时的现象与作用规律，具体内容包括：汽车空气动力学概述、流体力学基础、汽车空气动力学设计、汽车发动机冷却系统的空气动力特性、汽车驾驶室的通风特性、
汽车空气动力噪声，最后简单的介绍了汽车空气动力学试验方法。Automobile aerodynamics
This course is about the relative motion and laws of interaction of the air and vehicle during the vehicle’s travelling, including introduction of automobile aerodynamics, fundamentals of hydrodynamics, the designing of automobile aerodynamics, the aerodynamic features of engine cooling system, the ventilation features of driver’s cab, the aerodynamic noise of vehicles, and finally it briefly introduced the testing method of automobile aerodynamics.
《汽车车身结构与设计》这门课主要讲述了汽车车身的基本结构组成与车身部件的设计方法，具体内容包括：车身总布置设计、人机工程学在车身设计中的应用、汽车造型设计、汽车车身的空气动力性能、车身部件结构设计、汽车座椅设计、车身有限元计算方法。
The structure and design of bodywork
This course is about the construction of body and the designing of body spare parts, including the overall disposition design of body, the application of human engineering in body design, automobile modeling design, the aerodynamic quality of body, spare parts constructional design, seat design, and computing method of finite elements.
《现代汽车新技术》这门课主要讲述了近年来电气技术在汽车中的应用，以及汽车部分结构的一些改进。具体内容包括：汽车电子系统简介、四轮驱动技术、电动助力转向技术、发动
机液压悬置隔振技术、主动安全与被动安全、电动汽车与混合动力汽车、DSG变速器与CVT变速器。
Modern automobile technology
This course is about the application of electrical technology in automobiles in recent years and the structural improvement of some parts of automobiles, including introduction to automobile electronic system, four-wheel drive, electric power-assisted steering, engine hydromount vibration isolation, active safety and passive safety, electric vehicle and hybridpower vehicle, DSG transmission and CVT transmission.
《旧机动车鉴定与评估》这门课程主要讲述了中国现行旧机动车的价值鉴定与评估的基本方法，具体内容包括：旧机动车评估的基本方法、旧机动车技术状况鉴定、旧机动车价值评估、汽车碰撞损伤评估、旧机动车的销售定价，最后介绍了中国旧机动车交易的相关法律法规、考取旧机动车鉴定评估师的基本条件。
the old motor vehicle appraisal and evaluation
This course is about China’s current methods of the old motor vehicle appraisal and evaluation, including fundamental methods of evaluation, appraisal of technical conditions, value assessment, collision damage evaluation, sales pricing strategies of old motor vehicles. Finally it introduced the relative laws of old motor vehicle’s trading in China and the qualifications of becoming an old motor vehicle appraiser.《液压传动与气压传动》这门课程主要分为两大部分：液压传动、气压传动。前者讲述了液压系统的基本组成和工作原理，具体内容包括液压系统组成、液压流
体力学基础、液压泵、液压执行元件、液压控制元件、液压系统中的辅助装置、液压系统基本回路、典型的液压系统。气压传动部分具体内容包括：气压系统组成、气源装置和辅助元件、气动元件的应用、气压传动系统的基本回路、典型的液压系统。
hydraulic transmission and pneumatic transmission
This course is divided into two parts: hydraulic transmission and pneumatic transmission. The former is about the basic components and operational principles of hydraulic pressure system, including the components of pressure system, hydro-mechanics basics,hydraulic pump, action element, control element, auxiliaries, fundamental circuit, and typical hydraulic pressure system. The latter includes the components of pressure system, air supply device and auxiliaries, the application of pneumatic elements, fundamental circuit and typical pressure system.
气压系统也可以是pneumatic system /circuit
《工程制图》这门课主要讲述了如何用投影的方法绘制工程图样以及常见工程制图的规范，具体内容包括正投影基础、直线平面的相对位置、投影变换、曲面与曲线、组合体视图、轴测图、图样画法、标准件与常见件、零件图、装配图、计算机绘图。
Engineering drawing
This course is about how to make engineering drawing using projection method and standards of engineering drawing in common use, including orthographic projection basics, relative positions of line and plane, projection conversion, curve and curved surface, combinant views, axonometric(al) drawing, pattern drawings, standard parts and usual parts常见件或是parts in common use.，part drawing, assembly drawing, and computer graphics. Combinant 是组合体。
《信息检索与分析利用》这门课主要讲述了文献检索的方法和步骤以及如何从中获价值的信息，具体内容包括：信息检索与初级分析搜索引擎和网络信息检索、事实和数据型信息检索、图书信息检索、期刊信息检索、专利文献信息及商标信息检索、其他信息检索、检索案例选编、信息的分析利用。
Information retrieval—analysis and application
This course is about methods and procedures of Information retrieval and how to get valuable information, including information retrieval and primary analysis, search engines and internet information retrieval, facts and data information retrieval, book information retrieval, patent literature and trade mark information retrieval, other information retrieval, retrieval case selections, analysis and application of information.
《汽车维修工程》这门课主要讲述了汽车故障的成因和汽车各个部件维修的工艺过程，具体内容包括：汽车维修理论基础、汽车零件失效、汽车维修制度及工艺组织、汽车维修工艺过程、汽车零件修复方法、汽车发动机维修工艺、汽车底盘维修工艺、汽车车身维修工艺，以及修复后的总装试验方法。
Automobile maintenance and repairing
This course is about the causes of automobile failure and the process engineering of parts’ maintenance, including basic theories of automobile maintenance and repair, part failure, automobile maintenance and repair system, and its technique and microstructure (工艺和组织;如果是工艺型组织是craft organization；如果是组织工艺是organize process ), process engineering, part repairing, maintenance and repair of engine, chassis and body, and final assembly testing methods.
《C语言程序设计教程》这门课主要讲述程序设计的基本知识以及C语言在程序设计中的应用，具体内容包括：程序设计基础知识、C语言概述、数据类型与运算规则；顺序结构的程序设计、选择结构的程序设计、循环结构的程序设计、数组、函数、指针，最后简要介绍了结构、联合与枚举类型。
C language program design
This course is about the basic knowledge of program designing and the application of C language in it, including basic knowledge of program designing; introduction, data type and computing rules of C language; program design of sequential structure, selective structure and cycle structure; digital group, function, index; and finally a brief introduction to types of structure, union and enumeration. 指针，也可能是indicators.
电子技术英文自我介绍带翻译
电子技术英文自我介绍带翻译 I am 26 years old,born in shandong province . I was graduated from qingdao university. my major is electronic.and i got my bachelor degree after my graduation in the year of 2003. I spend most of my time on study,i have passed CET4/6 . and i have acquired basic knowledge of my major during my school time. In July 2003, I begin work for a small private company as a technical support engineer in QingDao city.Because I'm capable of more responsibilities, so I decided to change my job. And in August 2004,I left QingDao to BeiJing and worked for a foreign enterprise as a automation software test engineer.Because I want to change my working environment, I'd like to find a job which is more challenging. Morover Motorola is a global company, so I feel I can gain the most from working in this kind of company ennvironment. That is the reason why I come here to compete for this position. I think I'm a good team player and I'm a person of great honesty to others. Also I am able to work under great pressure. 我26岁,出生在山东省。 我毕业于青岛大学。我的专业是电子。我毕业后,我得到了我的学士学位在2003年。
英文自我介绍时常用十句话
英文自我介绍时常用十句话 英语面试时，经常会套用一些句子，以下归纳了英文自我介绍常用十句话，牢牢掌握，会对你以后在英语自我介绍时有所帮助。 1. i have been for over five years in teh employ of an exporting company. 本人曾经前后五年被受雇于出口贸易公司。 2. i have been in the business for the last ten years, and worked as the superintendent in the personnel department. 本人在过去十年在商界担任人事部主任迄今。 3. i have had five years‘ experience with a company as a salesman. 本人曾在某一公司担任推销员，前后有五年之久。 4. for the past three years, i have been in the office of the brothers trading co., where i have been ad still am an accountant. 本人曾经在兄弟贸易公司服务三年，担任会计工作，现仍在职中。 5. i am twenty years of age, and have been employed for the last two years by the green trees co., in teh general clerical work of the office. 我今年20岁，曾于绿林公司服务两年，担任一般文员工作。 6. i am 25 years of age, and have had two years‘ experience in my present post, which i am leaving to better myself.
机械类专业面试英文自我介绍
机械类专业面试英文自我介绍 对于机械工程师来说，工作经验是非常重要的。如果没有工作经验?也可以将以前设计过的作品告诉招聘者。以下是小编为你整理的机械类专业面试英文自我介绍，希望大家喜欢。 机械类专业面试英文自我介绍篇1 1) Why did you choose to major in mechanical engineering? 你为什么选择机械工程专业呢? 2) The most important factor is I like tinkering with machines. 最重要的一个因素就是我非常喜欢摆弄机械。 3) I am very interested in the field your company is in. 我对贵公司所从事的这个领域非常感兴趣。 4) How do you see your career development? 你如何看待你的事业发展呢? 5) Why do you think you are qualified for this position? 你为什么认为你适合这份工作呢? 6) Can you tell me about one of your designs? 你能介绍一项你的设计成果吗? CONVERSATIONS 会话会话会话会话?
A=Applicant I=Interviewer? Dialogue 1 I: Come in, please. A: Good afternoon, Mrs Smith. I: Good afternoon. Have a seat, please. You are Mr. Sun? A: Thank you. Yes, I am Sunling. I: I have read your resume. I know you have worked for 3 years. Why did you choose to major in mechanical engineering? A: Many factors led me to major in mechanical engineering. The most important factor is I like tinkering with machines. I: What are you primarily interested in about mechanical engineering? A: I like designing products, and one of my designs received an award. Moreover, I am familiar with CAD. But I can do any mechanic well if I am employed. I: Why did you decide to apply for this position? A: Your company has a very good reputation, and I am very interested in the field your company is in.
常用专业术语英文
组装、冲压、喷漆等专业词汇 Assembly line组装线 Layout布置图 OOBA开箱检查 fit together组装在一起 fasten锁紧(螺丝) fixture 夹具(治具) pallet栈板 barcode条码 barcode scanner条码扫描器 fuse together熔合 repair修理 operator作业员 QC quality品管 supervisor 课长 section supervisor课长 deputy section supervisor =vice section superisor副课长 ME制造工程师 MT制造生技 cosmetic inspect外观检查 inner parts inspect内部检查 thumb screw大头螺丝 lbs. inch镑、英寸 front plate前板 rear plate后板 chassis基座 bezel panel面板 power button电源按键 reset button重置键Hi-pot test of SPS高源高压测试 V oltage switch of SPS 电源电压接拉键 sheet metal parts 冲件 plastic parts塑胶件 SOP制造作业程序 material check list物料检查表 trolley台车 carton纸箱 sub-line支线 left fork叉车 personnel resource department 人力资源部 production department生产部门 planning department企划部 QC Section品管科 stamping factory冲压厂 painting factory烤漆厂 molding factory成型厂 punching machine 冲床 robot机械手 lathe车床 planer |'plein|刨床 miller铣床 grinder磨床 driller??床 linear cutting线切割 electrical sparkle电火花 welder电焊机 staker=reviting machine铆合机 position职务 president董事长 general manager总经理 special assistant manager特助 factory director厂长 department director部长 deputy manager | =vice manager副理 group leader/supervisor组长 line supervisor线长 thickness gauge厚薄规 gauge(or jig)治具 power wire电源线 buzzle蜂鸣器 defective product label不良标签 identifying sheet list标示单 iudustrial alcohol工业酒精 Tiana天那水 packaging打包 missing part漏件 wrong part错件 excessive defects过多的缺陷 critical defect极严重缺陷 major defect主要缺陷 minor defect次要缺陷 not up to standard不合规格 dimension/size is a little bigger尺寸偏 大(小) cosmetic defect外观不良 slipped screwhead/slippery screw head 螺丝滑头 speckle斑点 rust生锈 deformation变形 burr(金属)flash(塑件)毛边 poor staking铆合不良 excesssive gap间隙过大 grease/oil stains油污 inclusion杂质 painting peel off脏污 shrinking/shrinkage缩水 mixed color杂色 scratch划伤 poor processing 制程不良 poor incoming part事件不良 painting make-up补漆 discoloration羿色 water spots水渍 polishing/surface processing表面处理 exposed metal/bare metal金属裸露 lack of painting烤漆不到位 safety安全 quality品质 delivery deadline交货期 cost成本 engineering工程 die repair模修 enterprise plan = enterprise expansion projects企划 qualified products, up-to-grade products良品 defective products, not up-to-grade products不良品 to return material/stock to退料 scraped |'skræpid|报废 (be)qualfied, up to grade合格 not up to grade, not qualified不合格
电子专业面试英文自我介绍
电子专业面试英文自我介绍 篇一：英语面试自我介绍范文 Good morning, ladies and gentlemen! It is really my honor to have this opportunity for an interview. I hope I can make a good performance today. I'm confident that I can succeed. Now I will introduce myself briefly. I am 26 years old, born in Shandong province. I graduated from Qingdao University. My major is electronics. And I got my bachelor degree after my graduation in the year of 2003. I spent most of my time on study, and I’ve passed CET-6 during my university. And I’ve acquired basic knowledge of my major. It is my long cherished dream to be an engineer and I am eager to get an opportunity to fully play my ability. In July 2003, I began working for a small private company as a technical support engineer in Qingdao city. Because there was no more chance for me to give full play to my talent, so I decided to change my job. And in August 2004, I left for Beijing and worked for a foreign enterprise as an automation software test engineer. Because I want to change my working environment, I'd like to find a job which is more challenging. Moreover，Motorola is a global company, so I feel I can gain a lot from working in this kind of company. That is the reason why I come here to compete for this position. I think I'm a good team player and a person of great honesty to others. Also，I am able to work under great pressure. I am confident that I am qualified for the post of engineer in your company. That’s all. Thank you for giving me the chance. （中文翻译） 女士们，先生们，早上好！很荣幸有机会参加此次面试。我希望今天我能有好的表现。我希望此次面试能够成功。现在，请允许我自我介绍一下。我今年26岁，出生于山东省。我毕业于青岛大学电子专业。我在2003年毕业获得学士学位。大学期间，我努力学习，通过了大学英语六级 考试 ，掌握了基本的专业知识。成为电子工程师是我长期渴望的梦想。我渴望有机会施展我的才能。 2003年七月，我就职于青岛一家小的私人公司担任技术助理工程师。由于我的才能得不到足够的施展，我决定更换工作。在2004年8月，我前往北京为一家外资企业工作担任自动软件测试工程师。因为我想更换一下工作环境，想找一个更具挑战性的工作。而且我认为摩托罗拉公司是一个国际公司，我可以在这样的工作环境里收获更多。这就是我来这里面试的原因。我觉得我是一位具有良好团队精神、诚恳的人。而且，我能够在高强度压力下进行工作。我非常有信心我有能力胜任该公司的工程师职位。 感谢各位给我此次机会。
机械研究生复试必备英语自我介绍和万能模版
机械专业面试英语自我介绍 Good morning, my dear professors! It is my great honor to take this interview. Thank you very much for giving me the chance! My name is Yan li，I come from Liao ning Province , I am 23 years old. I am an undergraduate of Shandong University at Qingdao .My major is Mechanical design manufacturing and automation. The beautiful campus sceneries provide me an excellent study environment. After about three years’ hard work, I have learned most of the courses of my specialty and also do well in them. During the past 3 years in the university, as an undergraduate student, I have been working diligently at my specialty. I have built up a solid foundation for professional knowledge and comprehensively improved my quality. I got a lot of scholarships, once I feel I fall behind others, I will find the reason as soon as possible and try my utmost to catch up with them. And just owning to this, I could concentrate on my study and succeeded in the end. I am confident that my solid education background will lay me a foundation to fulfill my bachelor degree courses!
电子邮件英文简要自我介绍
电子邮件英文简要自我介绍 自我介绍是向别人展示你自己的一个重要手段，那么电子邮 件的英语自我介绍有哪些呢?今天WTT小雅就来告诉你电子邮件英 文简要自我介绍，欢迎阅读。 电子邮件英文简要自我介绍篇【1】 Good morning， everyone. Thank you for taking your time. It’s really my honor to have this opportunity to take part in this interview. Now， I would like to introduce myself briefly. My name is Doris. I am 23 years old and born in Qingdao. I graduated from Hebei University of Science and Technology. My major is English. And I got my bachelor degree after my graduation. I also studied Audit in Hebei Normal University of Science and Technology. I am very interested in English and study very hard on this subject. I had passed TEM-8 and BEC Vantage. I worked in an American company at the beginning of this year. My spoken English was improved a lot by communicating with Americans frequently during that period. I am very optimistic and easy to get along with. I have many friends. Teamwork spirit is very important in
采购英语面试自我介绍
采购英语面试自我介绍 General Introduction I am a third year master m ajor in autom ation at Shanghai Jiao Tong University, P. R. China. With trem endous interest in Industrial Engineering, I am writing to apply for acceptance into your Ph.D. graduate program. Education background In 1995, I entered the Nanjing University of Science & Technology (NUST) -- widely considered one of the China’s best engineering schools. During the following undergraduate study, m y academic records kept distinguished am ong the whole depart m ent. I was granted First Class Prize every sem ester, and m y overall GPA(89.5/100) ranked No.1 am ong 113 students. In 1999, I got the privilege to enter the graduate program waived of the adm ission test. I selected the Shanghai Jiao Tong University to continue my study for its best reputation on Combinatorial Optimization and Network Scheduling where my research interest lies. At the period of m y graduate study, m y overall GPA(3.77/4.0) ranked top 5% in the depart m ent. In the second sem ester, I becam e teacher assistant that is given to talented and matured students only. This year, I won the Acer Scholarship as the one and only candidate in m y depart m ent, which is the ultimate accolade for distinguished students endowed by my university. Presently, I am preparing my graduation thesis and trying for the honor of Excellent Graduation Thesis. Research experience and academ ic activity When a sophomore, I joined the Association of AI Enthusiast and began to narrow down m y interest for my future research. In 1997, I participated in simulation tool development for the scheduling system in Prof. Wang’s lab. With the tool of OpenGL and Matlab, I designed a simulation program for transportation scheduling system. It is now widely used by different research groups in NUST. In 1998, I assum ed and fulfilled a sewage analysis & dispose project for Nanjing sewage treatm ent plant. This was m y first practice to convert a laboratory idea to a commercial product. In 1999, I joined the distinguished Professor Yu-Geng Xis research group aiming at Network flow problem solving and Heuristic algorithm research. Soon I was engaged in the FuDan Gene Database Design. My duty was to pick up the useful information among different kinds of gene m atching format. Through the com parison and analysis for m any heuristic algorithms, I introduced an im proved evolutionary algorithm-- Multi-population Genetic Algorithm. By dividing a whole population into several sub-populations, this improved algorithm can effectively prevent GA from local convergence and promote various evolutionary orientations. It proved m ore efficiently than SGA in experiments, too. In the second sem ester, I joined the workshop-scheduling research in Shanghai Heavy Duty Tyre plant. The scheduling was designed for the rubber-m aking process that covered not only discrete but also continuous circumstances. To m ake a balance point between optimization quality and time cost, I proposed a Dynamic Layered Scheduling method based on hybrid Petri Nets. The practi cal application showed that the
机械类英文自我介绍
机械类英文自我介绍 自我介绍是向别人展示自己的重要途径,是与他人进行沟通、增进了解、建立联系的一种最基本、最常见的方式,下面是小编为大家整理的机械类英文自我介绍，仅供参考。 机械类英文自我介绍篇一：Good morning. Its a pleasure for me to be here in front of you to present myself. My name is xx, and I am a candidate for the position of Mechanical EngineerI graduated from xx university, majored in Category:Machine Design hard work, I have learned most of the courses of my specialty and also do well in them.During the past 3 years in the university, as an undergraduate student, I have been working diligently at my specialty. I have built up a solid foundation for professional knowledge and comprehensively improved my quality. I got a lot of scholarships, once I feel I fall behind others, I will find the reason as soon as possible and try my utmost to catch up with them. And just owning to this, I could concentrate on my study and succeeded in the end. I am confident that my solid education background will lay me a foundation to fulfill my bachelor degree courses! In my spare time, I like to read books, listen to Pop music,
常用机械英语单词
金属切削metal cutting 机床machine tool 金属工艺学technology of metals 刀具cutter 摩擦friction 联结link 传动drive/transmission 轴shaft 弹性elasticity 频率特性frequency characteristic 误差error 响应response 定位allocation 机床夹具jig 动力学dynamic 运动学kinematics 静力学static 分析力学analysis mechanics 拉伸pulling 压缩hitting 剪切shear 扭转twist 弯曲应力bending stress 强度intensity 三相交流电three-phase AC 磁路magnetic circles 变压器transformer 异步电动机asynchronous motor 几何形状geometrical 精度precision 正弦形的sinusoid 交流电路AC circuit 机械加工余量machining allowance 变形力deforming force 变形deformation应力stress 硬度rigidity 热处理heat treatment 退火anneal 正火normalizing 脱碳decarbonization 渗碳carboniz ation 电路circuit 半导体元件semiconductor element 反馈feedback 发生器generator 直流电源DC electrical source 门电路gate circuit 逻辑代数logic algebra 外圆磨削external grinding 内圆磨削internal grinding
电子专业英文自我介绍
电子专业英文自我介绍 it is really my honor to have this opportunity for an interview; i hope i can make a good performance today. i'm confident that i can succeed. now i will introduce myself briefly i am 25 years old, born in henan province. i graduated from henan university. my major is electronic, and i got my bachelor degree after my graduation in the year of XX. i spend most of my time on study, i have passed cet4/6, and i have acquired basic knowledge of my major during my school time. in july XX, i begin working for a small private company as a technical support engineer in beijing. because i'm capable of more responsibilities, so i decided to change my job. and in august XX,i left beijing to tangshan and worked for a foreign enterprise as a automation software test engineer. because i want to change my working environment, i'd like to find a job which is more challenging. moreover motorola is a global company, so i feel i can gain the most from working in this kind of company environment. that is the reason why i come here to compete for this position. i think i'm a good team player and i'm a person of great honesty to others. also i am able to work under great pressure. that respect leadership: you are good! i am electronic information project specialized XX sessions of graduates， learned in the near future your firm is advertising for the talented person， i hoped can arrive has the opportunity to your firm work. in school period， i study the specialized knowledge diligently， and invested the huge enthusiasm and the energy for it.while studies the textbook knowledge earnestly， i participate in school inside and outside practice positively， and has obtained some result. if monolithic integrated circuit development design， aspects and so on pcb layout as well as homepage design. the university four years let my english proficiency have progress，and smooth passed the national english six levels of tests，had certainly certainly has
英文自我介绍常用短句
英文自我介绍常用短句 英文自我介绍常用短句 英文自我介绍常用短句 My name is __________ . i am from ______________ . there are _______________ people in my family. my father works in a computer company. he is a computer engineer. my mother works in a international trade company. she is also a busy woman. i have a older sister and a younger brother. my sister is a junior in national taiwan university. she majors in english. my brother is an elementary school student. he is 8 years old. my name is___________ . there are 5 people in my family. my father is a chemistry teacher. he teaches chemistry in senior high school. my mother is an english teacher. she teaches english in the university. i have a younger brother, he is a junior high school student and is preparing for the entrance exam.
机械业内常用的中英文术语对照
机械业内常用的中英文术语对照 1 管道组成件 Piping component 1.1 管子 Pipe 管子(按照配管标准规格制造的) pipe 管子(不按配管标准规格制造的其他用管) tube 钢管 steel pipe 铸铁管 cast iron pipe 衬里管 lined pipe 复合管 clad pipe 碳钢管 carbon steel pipe 合金钢管 alloy steel pipe 不锈钢 stainless steel pipe 奥氏体不锈钢管 austenitic stainless steel pipe 铁合金钢管 ferritic alloy steel pipe 轧制钢管 wrought-steel pipe 锻铁管 wrought-iron pipe 无缝钢管 seamless (SMLS) steel pipe 焊接钢管 welded steel pipe 电阻焊钢管 electric-resistance welded steel pipe 电熔（弧）焊钢板卷管 electric-fusion (arc)-welded steel-plate pipe 螺旋焊接钢管 spiral welded steel pipe 镀锌钢管 galvanized steel pipe 热轧无缝钢管 hot-rolling seamless pipe 冷拔无缝钢管 cold-drawing seamless pipe 水煤气钢管 water-gas steel pipe 塑料管 plastic pipe 玻璃管 glass tube 橡胶管 rubber tube 直管 run pipe; straight pipe 1.2 管件 Fitting 弯头 elbow 异径弯头 reducing elbow 带支座弯头 base elbow k半径弯头 long radius elbow 短半径弯头 short radius elbow 长半径180巴渫?long radius return 短半径180巴渫?short radius return
电子专业本科生英文自我介绍_自我介绍
电子专业本科生英文自我介绍_自我介绍 it is really my honor to have this opportunity for an interview; i hope i can make a good performance today. i'm confident that i can succeed. now i will introduce myself briefly i am 25 years old, born in henan province. i graduated from henan university. my major is electronic, and i got my bachelor degree after my graduation in the year of XX. i spend most of my time on study, i have passed cet4/6, and i have acquired basic knowledge of my major during my school time. in july XX, i begin working for a small private company as a technical support engineer in beijing. because i'm capable of more responsibilities, so i decided to change my job. and in august XX,i left beijing to tangshan and worked for a foreign enterprise as a automation software test engineer. because i want to change my working environment, i'd like to find a job which is more challenging. moreover motorola is a global company, so i feel i can gain the most from working in this kind of company environment. that is the reason why i come here to compete for this position. i think i'm a good team player and i'm a person of great honesty to others. also i am able to work under great pressure. that’s all. thank you for giving me the chance. 分享让人快乐，欢迎下载使用