搜档网
当前位置:搜档网 › 翻译专业常用教材大盘点

翻译专业常用教材大盘点

翻译专业常用教材大盘点

翻译专业部分常用教材盘点

“翻译”专业在大部分院校研究生开设,少部分院校本科就设有这个专业。翻译专业的同学除了要上基础英语以外,从大学二年级开始就上翻译专业课。以下是翻译专业本科生系列教材的部分书目。

基础课:

《翻译概论》姜倩、何刚强

《专业翻译实务教程》(英汉汉英都有)姚锦清

《英汉翻译新教程》徐莉娜

英语口译系列书目:

《口译基础》苏伟、邓轶

《交替传译》杨柳燕

《同声传译》肖晓燕

《视译》陈菁

中文类:

《中文读写教程》潘文国

很多同学认为翻译只需要表达原文作者的意思,用目的语复述原文的内容就够了。还有些同学认为好的译文只需要在实践中提高就可以,没必要同学特定的学习增强对译文词句的了解。然而,无论初期的翻译,还是后期译文的打磨,都需要有着良好的中文功底。所以,学习中文写作,规范词语表达很有必要。

选修课:

《中国典籍英译》汪榕培

《文学翻译教程》孙致礼

《文言英译教程》郭著章

此三本书比较适合对文学翻译感兴趣的同学,尤其是中国文学外译方面。

《旅游英语互译教程》陈刚

《旅游英语导译教程》陈刚

此二本书针对对旅游感兴趣的同学。

《法律翻译教程》宋雷

《新闻翻译教程》张健

《科技翻译教程》方梦之

《机器翻译简明教程》李正栓

《语言学与翻译》王东峰

《汉英对比教程》潘文国

《英汉语对比与翻译》张春柏

《译者职业知识教程》韩子满

以上就是对翻译专业部分书目的简单介绍,当然还有其他的书,比如《非文学翻译》,比如上海高级口译和笔译系列的书籍,比如张培基的《英汉翻译教程》。以上的书同时也是翻译硕士和英语语言文学翻译理论与实践方向的备考书目,仅供参考。

汽车专业英语翻译综合

第一章汽车总论 1)Today’s average car contains more than 15,000 separate, individual parts that must work together. These parts can be grouped into four major categories: body, engine, chassis and electrical equipment 。P1 现在的车辆一般都由15000多个分散、独立且相互配合的零部件组成。这些零部件主要分为四类:车身、发动机、底盘和电气设备。 2)The engine acts as the power unit. The internal combustion engine is most common: this obtains its power by burning a liquid fuel inside the engine cylinder. There are two types of engine: gasoline (also called a spark-ignition engine) and diesel (also called a compression-ignition engine). Both engines are called heat engines; the burning fuel generates heat which causes the gas inside the cylinder to increase its pressure and supply power to rotate a shaft connected to the power train. P3 发动机作为动力设备,常见的类型是内燃机,其原理是通过发动机缸内的液体燃料燃烧而产生能量。发动机可分为两类:汽油机(点燃式)和柴油机(压燃式),都属于热力发动机。燃料燃烧产生热量使缸内气压上升,产生的能量驱动轴旋转,并传递给动力传动系。 第二章内燃机 1)Power train system: conveys the drive to the wheels 2)Steering system: controls the direction of movement 3)Suspension system: absorbs the road shocks 4)Braking system: slows down the vehicle P4 传动系把发动机输出的扭矩传递给驱动轮。传动系包括离合器(对应机械变速器)或液力变矩器(对应液力自动变速器)、变速器、驱动轴、主减速器、差速器和驱动桥。 5)Drum brakes have a drum attached to the wheel hub, and braking occurs by means of brake shoes expanding against the inside of the drum. With disc brakes, a disc attached to the wheel hub is clenched between two brake pads. P6 鼓式制动器的制动鼓和轮毂连接,制动蹄张开压紧制动鼓内侧从而产生制动。在盘式制动器上,连着轮毂的制动盘被紧紧夹在两个制动块之间。 1)Linking the piston by a connecting rod to a crankshaft causes the gas to rotate the shaft through half a turn.The power stroke"uses up"the gas,so means must be provided to expel the burnt gas and recharge the cylinder with a fresh petrol-air mixture:this control of gas movement is the duty of the valves;An inlet valve allows the mixture to enter at the right time and an exhaust valve lets out the burnt gas after the gas has done its job . P10 活塞通过连杆和曲轴连接,使得气体带动曲轴旋转半圈。作功冲程耗尽了所有的气体,这样就必须采取相应的措施排出废气并且向气缸内充入新的可燃混合气:气体的运动由气门来控制。进气门使可燃混合气在恰当的时刻进入气缸,排气门使燃烧后的废气排出气缸。 2)The spark-ignition engine is an internal-combustion engine with externally supplied in ignition,which converts the energy cntained in the fuel to kinetic energy.The cycle of operations is spread over four piston strokes. To complete the full cycle it takes two revolutions of the crankshaft. P11 火花点火式发动机是由外部提供点火的内燃机,从而将含在燃料内的能量转化成动能。发动机的一个工作循环分布在活塞的四个行程中,一个完整的工作循环曲轴需要转动两圈。 3)The oil pump in the lubricating system draws oil from the oil pan and sends it to all working parts in the engine. The oil drains off and runs down into the pan. Thus,there is constant circulation of oil between the pan and the working parts of the engine. P15

常用金融英语词汇的翻译知识讲解

常用金融英语词汇的 翻译

常用金融英语词汇的翻译 acquiring company 收购公司 bad loan 呆帐 chart of cash flow 现金流量表 clearly-established ownership 产权清晰 debt to equity 债转股 diversity of equities 股权多元化 economy of scale 规模经济 emerging economies 新兴经济 exchange-rate regime 汇率机制 fund and financing 筹资融资 global financial architecture 全球金融体系 global integration, globality 全球一体化,全球化 go public 上市 growth spurt (经济的)急剧增长 have one's "two commas" 百万富翁 hedge against 套期保值 housing mortgage 住房按揭 holdings 控股,所持股份 holding company 控股公司 initial offerings 原始股 initial public offerings 首次公募 innovative business 创新企业 intellectual capital 智力资本 inter-bank lending 拆借 internet customer 网上客户 investment payoff period 投资回收期 joint-stock 参股 mall rat 爱逛商店的年轻人 means of production 生产要素 (the)medical cost social pool for major diseases 大病医疗费用社会统筹mergers and acquisitions 并购

汽车专业英语翻译

About car engine Of all automobile components,an automobile engie is the most complicated assembly with dominant effects on the function of an autombile.So, the engine is generally called the"heat"of an automobile. 在汽车的所有部件中,汽车发动机是最复杂的组件,其对整车性能有着决定性的作用。因而发动机往往被称作发动机的“心脏”。 There are actually various types of engines such as electric motors,stream engines,andinternal combustion engines.The internal combustion engines seem to have almost complete dominance of the automotive field.The internal combustion engine,as its name indicates,burns fuel within the cylinders and converts the expanding force of the combustion into rotary force used to propel the vehicle. 事实上,按动力来源分发动机有很多种,如电动机、蒸汽机、外燃机等。然而内燃机似乎在发动机领域有着绝对的统治地位。就像其字面意思一样,内燃机的染料在气缸内燃烧,通过将燃烧产生气体的膨胀力转换成转动力来驱动发动机前进。 Engine is the power source of the automobile.Power is produced by the linear motion of a piston in a cylinder.However,this linear motion must be changed into rotary motion to turn the wheels of cars or trucks.The puston attached to the top of a connecting rod by a pin,called a piston pin or wrist pin.The bottom of the connecting rod is attached to the crankshaft.The connecting rod transmits the up-and-down motion of the piston to the crankshaft,which changes it into rotary motion.The connecting rod is mounted on the crankshaft with large bearings called rod bearing.Similar bearings, called main bearings,are used to mount the crankshaft in the block. 发动机是整部车的动力来源。能量来自于活塞在气缸内的(往复)直线运动。然而这种(往复)直线运动必须要转换成旋转运动才能驱动车轮。活塞与连杆通过一个销来连接,这个销称为活塞销。连杆的下部连接于曲拐。连杆把活塞的上下往复运动传递给曲拐,从而将往复直线运动转变成旋转运动。连杆和曲拐的连接使用大的轴承,称之为连杆轴承,类似的轴承也用于将曲轴连接到机体,称之为主轴承。 They are generally two different types of cooling system:water-cooling system and air-cooling system.Water-cooling system is more common.The cooling medium, or coolant, in them is either water or some low-freezing liquid, called antifreeze.A water-cooling system consists of the engine water jacket, thermostat, water pump, radiator, radiator cap, fan, fan drive belt and neccessary hoses. 主要有两种类型的冷却系统:水冷和风冷。水冷系统更为普遍。系统所用冷却介质或是冷却液常委水或其他低凝固点液体,称为抗凝剂。一个完整的水冷系统包括机体水套,节温器,水泵,散热器,散热器罩,风扇,风扇驱动皮带和必需的水管。 A water-cooling system means that water is used as a cooling agent to circulate through the engine to absorb the heat and carry it to the radiator for disposal.The ebgine is cooled mainly through heat transfer and heat dissipation.The heat generated by the mixture burned in the engine must be transferred from the iron or aluminum cylinder to the waterin the water jacket.The outside of the water jacket dissipates some of the heat to the air surrounding it, but most of the heat is carried by the cooling water to the radiator for dissipation.When the coolant temperature in the system reaches 90°,the termostat valve open fully, its slanted edge shutting off

常见翻译词汇(专题篇)

六级翻译词汇经济篇: 宏观经济macro economy 社会主义市场经济socialist market economy 知识经济knowledge economy 网络经济Internet-based economy 经济规律law of economy 大规模生产mass production 生产力productive forces 生产关系relations of production 公有制public ownership 私有制private ownership 国有企业state-owned enterprises (SOEs) 私营企业private business 民营企业privately-run business 中小企业small and medium enterprises (SMEs) 连锁企业franchise / chain business 国民生产总值Gross National Product (GNP) 国内生产总值Gross Domestic Product (GDP)

实际增长率growth rate in real terms 年均增长率average growth rate per annum 可持续增长sustainable growth 经济效益economic returns 投资回报率rate of return on investment 衰退recession 宏观调控macro control 提高经济效益enhance economic performance 扭亏为盈turn a loss-making business into a profitable one 优化经济结构optimize economic structure 扩大内需expand domestic demand 国计民生national interest and people’s livelihood 经济特区special economic zones “十二五规划“ the 12th Five-Year Plan for National and Economic and Social Development 风险投资venture investment 经济繁荣economic boom

汽车专业英语课文翻译4

Fuel Supply System of Gasoline Engine(UNIT SEVEN) All the gasoline engines have substantially identical fuel systems and run on a mixture consisting of fuel vapor and air. The fuel system comprises the units designed to store, clear and deliver fuel, the units intended to clean air and a unit for preparing a mixture from fuel vapor and air. In a fuel system different components are used to supply fuel from the fuel tank into the engine cylinder. Some of the important components are fuel tank, fuel pump, fuel filter, carburetor, intake manifold and fuellines or tubes connecting the tank, pump and the carburetor. The fuel tank is a fuel container used for storing fuel. It is made of sheet metal. It is attached to the vehicle frame with metal traps and is located at the rear of the vehicle. They are mounted in a boot or boot-floor pan in case of front-engined cars and small commercial vehicles. In order to strengthen the tank as well as to prevent surging of fuel when the vehicle rounds a curve of suddenly stops, baffle plates are attached to the inside of the tank. A cap is used to close the filler opening of the tank. The fuel line is attached at or near the bottom of the tank with a filtering element placed at the connection. The other components of the fuel tank are the fuel gauge sending unit, a vent pipe, receiving unit. To prevent the dirt and water from entering the luggage compartment, a sealing strip is fitted between the fuel tank and boot floor pan. Moreover to limit the transmission of frame distortion to the tank giving rise to squeaking as the metal parts get rubbed together, rubber or felt pads are often fitted between the mountings and the tank. Provision is also made against drumming of the tank by these mountings. The tank may be placed at the side of the chassis frame for convenience in case of large commercial vehicles. The length of the connecting lines or tubes from the tank to the carburetor is also restricted by this at the same time. A porous filter is attached to the outlet lines. By drawing fuel from the tank through the filter, any water in the bottom of the tank as well as any dirt into the fuel gathers on the surface of the filter. To keep the fuel always under atmospheric pressure, the filter pipe or tank is vented. In order to prevent dirt in the fuel from entering the fuel pump or carburetor, fuel filters and screens are used in the fuel system. If the dirt is not removed from the fuel, the normal operation of these units will be prevented. The engine performance will also be reduced.

经济学常用词汇解释及翻译

1、绝对优势(Absolute advantage) 如果一个国家用一单位资源生产的某种产品比另一个国家多,那么,这个国家在这种产品的生产上与另一国相比就具有绝对优势。 2、逆向选择(Adverse choice) 在此状况下,保险公司发现它们的客户中有太大的一部分来自高风险群体。 3、选择成本(Alternative cost) 如果以最好的另一种方式使用的某种资源,它所能生产的价值就是选择成本,也可以称之为机会成本。4、需求的弧弹性(Arc elasticity of demand) 如果P1和Q1分别是价格和需求量的初始值,P2 和Q2 为第二组值,那么,弧弹性就等于 -(Q1-Q2)(P1+P2)/(P1-P2)(Q1+Q2) 5、非对称的信息(Asymmetric information) 在某些市场中,每个参与者拥有的信息并不相同。例如,在旧车市场上,有关旧车质量的信息,卖者通常要比潜在的买者知道得多。 6、平均成本(Average cost) 平均成本是总成本除以产量。也称为平均总成本。 7、平均固定成本( Average fixed cost) 平均固定成本是总固定成本除以产量。 8、平均产品(Average product) 平均产品是总产量除以投入品的数量。 9、平均可变成本(Average variable cost) 平均可变成本是总可变成本除以产量。 10、投资的β(Beta) β度量的是与投资相联的不可分散的风险。对于一种股票而言,它表示所有现行股票的收益发生变化时,一种股票的收益会如何敏感地变化。 11、债券收益(Bond yield) 债券收益是债券所获得的利率。 12、收支平衡图(Break-even chart) 收支平衡图表示一种产品所出售的总数量改变时总收益和总成本是如何变化的。收支平衡点是为避免损失而必须卖出的最小数量。 13、预算线(Budget line) 预算线表示消费者所能购买的商品X和商品Y的数量的全部组合。它的斜率等于商品X的价格除以商品Y 的价格再乘以一1。 14、捆绑销售(Bundling) 捆绑销售指这样一种市场营销手段,出售两种产品的厂商,要求购买其中一种产品的客户,也要购买另一种产品。 15、资本(Capital) 资本是指用于生产、销售及商品和服务分配的设备、厂房、存货、原材料和其他非人力生产资源。 16、资本收益(Capital gain) 资本收益是指人们卖出股票(或其他资产)时所获得的超过原来为它支付的那一部分。 17、资本主义(Capitalism) 资本主义是一种市场体系,它依赖价格体系去解决基本的经济问题:生产什么?如何生产?怎样分配?经济增长率应为多少? 18、基数效用(Cardinal utility) 基数效用是指像个人的体重或身高那样在基数的意义上可以度量的效用(它意味着效用之间的差别,即边

汽车专业英语_单词表

unit1 body 车身chassis 底盘enclosure外壳、套hood车棚、车顶sway 摇摆frame车架steering转向、操作brake 制动weld焊接rivet铆钉bolt螺钉washer垫圈vibration 振动stabilizer稳定器ride乘坐舒适性handling操作稳定性linkages转向传动机构plier钳子distributor分电器alternator交流发电机regulator调节器carburetor化油器radiator散热器、水箱defroster除冰装置sludge金属碎屑transmission变速器differential 差速器power train 传动系unitized body 承载式车身suspension system 悬架系统steering system 转向系braking system 制动系shock absorbers减震器control arms控制臂steering wheel 转向盘steering column转向管柱steering gears 转向器tie rod 横拉杆idler arm随动臂brake shoe制动蹄disc brake 盘式制动器drum brakes 鼓式制动器ignition system 点火系统exhaust system 排气系统lubrication system 润滑系oil filters 机油滤清器drive(or propeller)shaft传动轴universal joints 万向节dynamo发电机horn喇叭swived 旋转steering box转向器timing gear 正时齿轮bevel gear 锥齿轮mesh with与啮合leaf spring 钢板弹簧stub axle 转向节 unit2 longitudinal纵向的transverse横向的reciprocate往复spin旋转piston活塞ignite点火rub摩擦quart夸脱reservoir油箱mechanical机械的enclosed被附上的gallon加仑stroke冲程camshaft凸轮轴combustion燃烧disengaged脱离啮合的flywheel飞轮internal-combustion engine内燃机diesel-fuel柴油LPG=Liquefied Petroleum Gas液化石油气体CNG=Compressed natural gas压缩天然气spark ignition火花点火compression ignition压缩点火spark plug火花塞gas-turbine engine蒸汽机Stirling engine斯特灵发动机lubricating system润滑系统oil pan油底壳oil pump机油泵exhaust system排气系统emission-control system排放控制系统energy conversion能量转换air/fuel ratio空燃比connecting rod连杆TDC=Top Dead Center上止点BDC=Bottom Dead Center 下止点intake stroke进气冲程compression stroke压缩冲程power stroke作功冲程exhaust stroke排气冲程compression ratio压缩比lifter挺柱rocker摇臂retainer弹簧座seal密封件tappet 推杆lobe凸起gasket垫圈valve train配气机构cam follower气门挺柱rocker arm摇臂combustion chamber燃烧室intake valve进气阀exhaust valve排气阀valve stem气门杆valve cover气门室盖valve port阀口valve guide气门导管 unit3

汽车专业英语翻译

INTERNAL COMBUSTION ENGINE 引擎燃烧室 1. principle of operation 原理 Engine and power : Engine is used to produce power. The chemical energy in fuel is converted to heat by the burning of the fuel at a controlled rate. This process is called combustion. If engine combustion occurs with the power chamber. ,the engine is called internal combustion engine. If combustion takes place outside the cylinder, the engine is called an external combustion engine. Engine used in automobiles are internal combustion heat engines. Heat energy released in the combustion chamber raises the temperature of the combustion gases with the chamber. The increase in gas temperature causes the pressure of the gases to increase. The pressure developed within the combustion chamber is applied to the head of a piston to produce a usable mechanical force, which is then converted into useful mechanical power. 译: 引擎和能量: 引擎为汽车提供能量,燃料的化学能通过燃烧,转化为热能,这个过程叫燃烧。假如燃烧在燃烧室,这样的发动机叫内燃机。假如燃烧在气缸外,这样的发动机叫外燃机。 用在汽车上的一般是内燃机,热能在燃烧室释放,燃烧室气体温度升高。气体温度的升高使气体的压力曾加,燃烧室内的高压气体作用在活塞头部产生可以利用的化学能,化学能转化为机械能。 Engine T erms : Linking the piston by a connecting rod to a crankshaft causes the gas to rotate the shaft through half a turn. The power stroke “uses up” the gas , so means must be provided to expel the burnt gas and recharge the cylinder with a fresh petrol-air mixture :this control of gas movement is the duty of the valves ;an inlet valve allows the new mixture to enter at the right time and an exhaust valve lets out the burnt gas after the gas has done its job. Engine terms are : TDC(Top Dead Center):the position of the crank and piston when the piston is farther away from the crankshaft. BDC(Bottom Dead Center):the position of the crank and piston when the piston is nearest to the crankshaft. Stroke : the distance between BDC and TDC; stroke is controlled by the crankshaft. Bore : the internal diameter of the cylinder. Swept volume : the volume between TDC and BDC Engine capacity : this is the swept volume of all the cylinder e.g. a four-stroke having a capacity of two liters(2000cm) has a cylinder swept volume of 50cm. Clearance volume: the volume of the space above the piston when it is at TDC. Compression ratio = (swept vol + clearance vol)\(clearance vol) Two-stroke : a power stroke every revolution of the crank.

常用专业术语翻译

1.素质教育:Quality Education 2. EQ:分两种,一种为教育商数Educational quotient,另一种情感商数Emotional quotient 3. 保险业:the insurance industry 4. 保证重点指出:ensure funding for priority areas 5. 补发拖欠的养老金:clear up pension payments in arrears 6. 不良贷款:non-performing loan 7. 层层转包和违法分包:mutlti-level contracting and illegal subcontracting 8. 城乡信用社:credit cooperative in both urban and rural areas 9. 城镇居民最低生活保障:a minimum standard of living for city residents 10. 城镇职工医疗保障制度:the system of medical insurance for urban workers 11. 出口信贷:export credit 12. 贷款质量:loan quality 13. 贷款质量五级分类办法:the five-category assets classification for bank loans 14. 防范和化解金融风险:take precautions against and reduce financial risks 15. 防洪工程:flood-prevention project 16. 非法外汇交易:illegal foreign exchange transaction 17. 非贸易收汇:foreign exchange earnings through nontrade channels 18. 非银行金融机构:non-bank financial institutions 19. 费改税:transform administrative fees into taxes 20. 跟踪审计:foolow-up auditing 21. 工程监理制度:the monitoring system for projects 22. 国有资产安全:the safety of state-owned assets 23. 过度开垦:excess reclamation 24. 合同管理制度:the contract system for governing projects 25. 积极的财政政策:pro-active fiscal policy 26. 基本生活费:basic allowance 27. 解除劳动关系:sever labor relation 28. 金融监管责任制:the responsibility system for financial supervision 29. 经济安全:economic security 30. 靠扩大财政赤字搞建设:to increase the deficit to spend more on development 31. 扩大国内需求:the expansion of domestic demand 32. 拉动经济增长:fuel economic growth 33. 粮食仓库:grain depot 34. 粮食收购企业:grain collection and storage enterprise 35. 粮食收购资金实行封闭运行:closed operation of grain purchase funds 36. 粮食销售市场:grain sales market 37. 劣质工程:shoddy engineering

汽车专业英语课文翻译1

Types of Automobiles(UNITTWO) 汽车的类型 The automobile industry is a fast developing industry. Form the later 18th century when the first automobile was put on road, this industry has developed tremendously. Now there are thousands of factories all over the world manufacturing numerous types of automobiles. This industry employs crores of men and women directly and indirectly in allied industries. The automobile engines are also being used in engine powered machines for agriculture, construction and manufacturing processes. Various types of small engines are also being used in lawn movers, power saws, snow removers and similar equipment. The automobile industry is a developing and demanding industry which does not find its end or saturation point. There is a great demand for varied types of automotive products, vehicles and engines. There is also a great demand for trained and experienced persons in this industry for diagnosing motor vehicle troubles, repairing and replacing engines components, transmissions, propeller shafts, differentials, axles, steering system components, brake system components, suspension components, air conditioners, heaters, body and glass work. 汽车产业是一个迅速发展的行业。形成后18世纪当第一汽车被放在路,这个行业的发展极大。现在有成千上万的工厂世界各地制造许多类型的汽车。这个行业雇佣了卢比的男性和女性直接和间接地在盟军的产业。汽车引擎也被用于发动机动力机器为农业、建筑业和制造业的过程。各种类型的小引擎也被用于草坪搬家公司,电锯,雪消毒剂和类似的设备。汽车行业是一个发展中国家和要求行业没有找到它的结尾或饱和点。有大量需要不同类型的汽车产品,汽车和发动机。还有一个巨大的需求训练和经验丰富的人在这个行业对诊断机动车麻烦、维修和更换引擎组件、变速箱、螺旋桨轴、差异、轴、转向系统组件,制动系统组件,悬挂组件、空调、热水器、身体和玻璃的工作。 There are numerous types of automobiles used in the world. There are in general three main classifications of the various types of vehicles. 有许多类型的汽车在世界上使用。一般有三种主要分类的各种类型的车辆。 The single-unit vehicles or load carriers. 车辆的单件或负载运营商。 Articulated vehicles. 铰接车辆。 The heavy tractor vehicles. 沉重的拖拉机车辆。 Single-unit vehicles are of conventional four-wheel type. The great majority of vehicles are of two axle design, In these vehicles the front axle is a steering non-driving axle and the rear axle is the driving axle. With the passage of time, a great many changes have taken place in the number of axles and the driving arrangements. 单一制车辆四轮类型的传统。绝大多数的车辆被两个轴的设计,在这些车辆前轴是转向非驱动轴和后轴驱动轴。随着时间的流逝,许多变化已经发生轴的数量和驾驶的安排。 In this classification, digital terms like 4×2, 4×4, 6×4etc,are commonly used. The first figure denotes the total number of wheels and the second figure the number of driving wheels. 在这个分类、数字术语像4×2、4×4、6×4等,被普遍使用。第一个图表示轮子的总数和第二

相关主题