毕 业 设 计(英文翻译)

附录G：英文翻译参考（要求学生完成与论文有关的外文资料中文字数5000字左右的英译汉，旨在培养学生利用外文资料开展研究工作的能力，为所选课题提供前沿参考资料。）

毕业设计（英文翻译）题目

系别：

专业：

班级：

学生姓名：

学号：

指导教师：

一位从事质量管理的人

约瑟夫·朱兰出生于圣诞夜,1904 在罗马尼亚的喀尔巴阡山脉山中。他青年时期的村庄中贫穷、迷信和反犹太主义甚是猖獗。1912年朱兰家搬到了明尼阿波尼斯州，虽然充满了危险，但是它却让一个男孩充满信心和希望。

从如此多了一个在质量观念的世界最好改革者之一。在他90年的生活中，朱兰一直是一个精力充沛的思想者倡导者，推动着传统的质量思想向前走。因为九岁就被雇用,朱兰表示在他的生活工作上永不停止。

记者:技术方面如何讲质量?

朱兰:技术有不同方面:一、当然是精密。物的对精密的需求像电子学、化学…我们看来它们似乎需要放大来说,和重要的原子尘的有关于质量。要做到高精密具有相当大的挑战，而且我们已经遇见非常大的挑战。另外的一个方面是可信度－没有失败。当我们举例来说建立一个系统，同类空中交通管制的时候,我们不想要它失败。我们必须把可信度建入系统。因为我们投入很大的资金并依赖这些系统，系统非常复杂，这是逐渐增加的。除此之外,有对公司的失败费用。如果事物在领域中意外失败,

可以说，它影响民众。但是如果他们失败在内部,然后它影响公司的费用,而且已经试着发现这些费用在哪里和该如何免除他们。因此那些是相当大的因素:精密、可信度和费用。还有其它的,当然，但是我认为这些是主要的一些。

记者:据说是质量有在美国变成一种产业的可能?

朱兰:资讯科技当然有。已经有大的变化。在世纪中初期当质量的一个想法到一个检验部门的时候，这有了分开的工作，东西被做坏之后。检验是相当易错的程序,实际上。而且无论如何，资讯科技在那天中相当花时间，直到某事已经被认为是否资讯科技是正确的。应该强调计划，如此它不被错误首先订定。

现在已经有大的变化，而且资讯科技已经飞速发展。质量部门已经出现，如公司的一个主要功能,虽然它过去不存在，但一直很重要。在世纪中初期你无法找到被称为质量或一个被称为质量经理的人组织图解上的一个部门。现在你已经可以看到大量的质量经理的出现;他们其中的一些是副总裁。功能已经转到重要方面而且它已经戏剧性地在范围方面改变上面。一个好相似乎正在财政方面发生的东西。财政部门的大角色是帮助建立公司的财政目标，预算,然后发展一个测定的方法是否他们正在符合那些目标。然后有一些其他的功能。质量的出现是期待帮助公司建立企业的质量目标并且为测量他们正在符合那些目标而且出产的范围发展方法数据劝告管理者。

……

……

……

A Man of Quality

Born Christmas Eve, 1904 in the Carpathian Mountains of Romania, Joseph Juran had nowhere to go but up. Poverty, superstition, and anti-Semitism were rampant in the villages of his youth. A perilous relocation to Minneapolis by the Juran family in 1912 offered little immediate relief, but it did provide opportunity for a bright and ambitious boy.

From such an unlikely set of circumstances grew one of the world’s greatest innovators of the quality concept. Now in his mid-90s, Juran remains an energetic thinker on the subject, prompting engineers and managers to push the deployment lf quality beyond traditional uses. Employed since the age of nine, Juran shows no signs of putting the brakes on his life’s work.

IIE: How is technology shaping quality issues?

Juran:There are different aspects of technology: one, of course, is precision. Th e need for precision in things like electronics, chemical purity...they’ve escalated quite a bit in our century, and one of the important fallouts has been with respect to quality. Achieving the necessary precision has been quite a challenge, and to a degree we’ve met the challenge. Another aspect is reliability—freedom from failure. When we set up a system like, for instance, air traffic control, we don’t want it to fail. We have to build reliability into the system. And this is increasing because we put such great dependence on these systems and the systems are very complex. In addition, there is the cost of failures to companies. If things fail out in the field, So to speak, it affects the public. But if they fail internally, then it affects the company’s costs, and there has been quite a push to try to discover where these costs are and how to get rid of them. So those are three pretty big factors: precision, reliability, and cost. There are others, of course, but I think these are the principal

ones.

IIE: Is it accurate to say that quality has become an industry in the United States?

Juran:It sure has. There has been a big shift. Early in the century when one thought of quality one thought of an inspection department, which had the job of separating good from bad after the stuff was made. Inspection is a pretty fallible process, actually. And anyway, it’s pretty late in the day to wait until something has already been produced to see if it’s right or not. The big emphasis should be on planning so it isn’t made wrong in the first place.

There’s been a big shift and it’s brought about a big growth in the importance of function. Quality has emerged as a maj or function of the company, which it didn’t used to be. Early in the century you couldn’t find a department on the organization chart that was called quality or a person that was called quality manager. Now you’ve got a pretty wide use of quality managers; some of them are vice presidents. The function has moved up in importance and it has changed dramatically in scope. A good analogy there is what’s happening in finance. The big roles of the finance department are to help establish the company’s financial goals, the budget, and then to develop a means of measuring whether they’re meeting those goals. And then there are some other functions. And what has emerged is that the quality function pretty much parallels that. The expectation is to help the company establish corporate quality goals and to develop means for measuring the extent to which they’re meeting those goals and publishing that information to advise the officers.

……

……

……

工业设计专业英语英文翻译

工业设计原著选读 优秀的产品设计 第一个拨号电话1897年由卡罗耳Gantz 第一个拨号电话在1897年被自动电器公司引入，成立于1891年布朗强，一名勘萨斯州承担者。在1889年，相信铃声“中央交换”将转移来电给竞争对手，强发明了被拨号系统控制的自动交换机系统。这个系统在1892年第一次在拉波特完成史端乔系统中被安装。1897年，强的模型电话，然而模型扶轮拨条的位置没有类似于轮齿约170度,以及边缘拨阀瓣。电话，当然是被亚历山大格雷厄姆贝尔（1847—1922）在1876年发明的。第一个商业交换始建于1878（12个使用者），在1879年，多交换机系统由工程师勒罗伊B 菲尔曼发明,使电话取得商业成功,用户在1890年达到250000。 直到1894年，贝尔原批专利过期，贝尔电话公司在市场上有一个虚拟的垄断。他们已经成功侵权投诉反对至少600竞争者。该公司曾在1896年，刚刚在中央交易所推出了电源的“普通电池”制度。在那之前，一个人有手摇电话以提供足够的电力呼叫。一个连接可能仍然只能在给予该人的名义下提出要求达到一个电话接线员。这是强改变的原因。 强很快成为贝尔的强大竞争者。他在1901年引进了一个桌面拨号模型，这个模型在设计方面比贝尔的模型更加清晰。在1902年，他引进了一个带有磁盘拨号的墙面电话，这次与实际指孔，仍然只有170度左右在磁盘周围。到1905年，一个“长距离”手指孔已经被增加了。最后一个强的知名模型是在1907年。强的专利大概过期于1914年，之后他或他的公司再也没有听到过。直到1919年贝尔引进了拨号系统。当他们这样做，在拨号盘的周围手指孔被充分扩展了。 强发明的拨号系统直到1922年进入像纽约一样的大城市才成为主流。但是一旦作为规规范被确立，直到70年代它仍然是主要的电话技术。后按键式拨号在1963年被推出之后，强发明的最初的手指拨号系统作为“旋转的拨号系统”而知名。这是强怎样“让你的手指拨号”的。 埃姆斯椅LCW和DCW 1947 这些带有复合曲线座位，靠背和橡胶防震装置的成型胶合板椅是由查尔斯埃姆斯设计，在赫曼米勒家具公司生产的。 这个原始的概念是被查尔斯埃姆斯（1907—1978）和埃罗沙里宁（1910—1961）在1940年合作构想出来的。在1937年，埃姆斯成为克兰布鲁克学院实验设计部门的领头人，和沙里宁一起工作调查材料和家具。在这些努力下，埃姆斯发明了分成薄片和成型胶合板夹板，被称作埃姆斯夹板，在1941年收到了来自美国海军5000人的订单。查尔斯和他的妻子雷在他们威尼斯，钙的工作室及工厂和埃文斯产品公司的生产厂家一起生产了这批订单。 在1941年现代艺术博物馆，艾略特诺伊斯组织了一场比赛用以发现对现代生活富有想象力的设计师。奖项颁发给了埃姆斯和沙里宁他们的椅子和存储碎片，由包括埃德加考夫曼，大都会艺术博物馆的阿尔弗雷德，艾略特诺伊斯，马尔塞布鲁尔，弗兰克帕里什和建筑师爱德华达雷尔斯通的陪审团裁决。 这些椅子在1946年的现代艺术展览博物馆被展出，查尔斯埃姆斯设计的新的家具。当时，椅子只有三条腿，稳定性问题气馁了大规模生产。 早期的LCW（低木椅）和DWC（就餐木椅）设计有四条木腿在1946年第一次被埃文斯产品公司（埃姆斯的战时雇主）生产出来，被赫曼米勒家具公司分配。这些工具1946年被乔治纳尔逊为赫曼米勒购买，在1949年接手制造权。后来金属脚的愿景在1951年制作，包括LCW（低金属椅）和DWC（就餐金属椅）模型。配套的餐饮和咖啡桌也产生。这条线一直

毕设外文资料翻译.

理工学院 毕业设计外文资料翻译 专业：计算机科学与技术 姓名：马艳丽 学号： 12L0752218 外文出处：The Design and Implementation of 3D Electronic Map of Campus Based on WEBGIS 附件： 1.外文资料翻译译文；2.外文原文。

附件1：外文资料翻译译文 基于WebGIS的校园三维电子地图的设计与实现 一．导言 如今，数字化和信息化是当今时代的主题。随着信息革命和计算机科学的发展，计算机技术已经渗透到科学的各个领域，并引起了许多革命性的变化，在这些科目，古代制图学也不例外。随着技术和文化的不断进步，地图变化的形式和内容也随之更新。在计算机图形学中，地理信息系统（GIS）不断应用到Web，制作和演示的传统方式经历了巨大的变化，由于先进的信息技术的发展，地图的应用已经大大延长。在这些情况下，绘图将面临广阔的发展前景。电子地图是随之应运而生的产品之一。随着计算机技术，计算机图形学理论，遥感技术，航空摄影测量技术和其他相关技术的飞速发展。用户需要的三维可视化，动态的交互性和展示自己的各种地理相关的数据处理和分析，如此多的关注应支付的研究三维地图。东北石油大学及其周边地区的基础上本文设计并建立三维电子地图。 二．系统设计 基于WebGIS的校园三维电子地图系统的具有普通地图的一般特性。通过按键盘上的箭头键（上，下，左，右），可以使地图向相应的方向移动。通过拖动鼠标，可以查看感兴趣的任何一个地方。使用鼠标滚轮，可以控制地图的大小，根据用户的需求来查看不同缩放级别的地图。在地图的左下角会显示当前鼠标的坐标。在一个div层，我们描绘了一个新建筑物的热点，这层可以根据不同的地图图层的显示，它也可以自动调整。通过点击热点，它可以显示热点的具体信息。也可以输入到查询的信息，根据自己的需要，并得到一些相关的信息。此外，通过点击鼠标，人们可以选择检查的三维地图和卫星地图。 主要功能包括： ?用户信息管理：检查用户名和密码，根据权限设置级别的认证，允许不同权限的用户通过互联网登录系统。 ?位置信息查询：系统可以为用户提供模糊查询和快速定位。

毕业设计外文翻译附原文

外文翻译 专业机械设计制造及其自动化学生姓名刘链柱 班级机制111 学号1110101102 指导教师葛友华

外文资料名称： Design and performance evaluation of vacuum cleaners using cyclone technology 外文资料出处：Korean J. Chem. Eng., 23(6), (用外文写) 925-930 (2006) 附件： 1.外文资料翻译译文 2.外文原文

应用旋风技术真空吸尘器的设计和性能介绍 吉尔泰金，洪城铱昌，宰瑾李， 刘链柱译 摘要：旋风型分离器技术用于真空吸尘器 - 轴向进流旋风和切向进气道流旋风有效地收集粉尘和降低压力降已被实验研究。优化设计等因素作为集尘效率，压降，并切成尺寸被粒度对应于分级收集的50％的效率进行了研究。颗粒切成大小降低入口面积，体直径，减小涡取景器直径的旋风。切向入口的双流量气旋具有良好的性能考虑的350毫米汞柱的低压降和为1.5μm的质量中位直径在1米3的流量的截止尺寸。一使用切向入口的双流量旋风吸尘器示出了势是一种有效的方法，用于收集在家庭中产生的粉尘。 摘要及关键词：吸尘器; 粉尘; 旋风分离器 引言 我们这个时代的很大一部分都花在了房子，工作场所，或其他建筑，因此，室内空间应该是既舒适情绪和卫生。但室内空气中含有超过室外空气因气密性的二次污染物，毒物，食品气味。这是通过使用产生在建筑中的新材料和设备。真空吸尘器为代表的家电去除有害物质从地板到地毯所用的商用真空吸尘器房子由纸过滤，预过滤器和排气过滤器通过洁净的空气排放到大气中。虽然真空吸尘器是方便在使用中，吸入压力下降说唱空转成比例地清洗的时间，以及纸过滤器也应定期更换，由于压力下降，气味和细菌通过纸过滤器内的残留粉尘。 图1示出了大气气溶胶的粒度分布通常是双峰形，在粗颗粒（>2.0微米）模式为主要的外部来源，如风吹尘，海盐喷雾，火山，从工厂直接排放和车辆废气排放，以及那些在细颗粒模式包括燃烧或光化学反应。表1显示模式，典型的大气航空的直径和质量浓度溶胶被许多研究者测量。精细模式在0.18?0.36 在5.7到25微米尺寸范围微米尺寸范围。质量浓度为2?205微克，可直接在大气气溶胶和 3.85至36.3μg/m3柴油气溶胶。

毕业设计英文翻译

使用高级分析法的钢框架创新设计 1．导言 在美国，钢结构设计方法包括允许应力设计法(ASD)，塑性设计法(PD)和荷载阻力系数设计法(LRFD)。在允许应力设计中，应力计算基于一阶弹性分析，而几何非线性影响则隐含在细部设计方程中。在塑性设计中，结构分析中使用的是一阶塑性铰分析。塑性设计使整个结构体系的弹性力重新分配。尽管几何非线性和逐步高产效应并不在塑性设计之中，但它们近似细部设计方程。在荷载和阻力系数设计中，含放大系数的一阶弹性分析或单纯的二阶弹性分析被用于几何非线性分析，而梁柱的极限强度隐藏在互动设计方程。所有三个设计方法需要独立进行检查，包括系数K计算。在下面，对荷载抗力系数设计法的特点进行了简要介绍。 结构系统内的内力及稳定性和它的构件是相关的，但目前美国钢结构协会（AISC）的荷载抗力系数规范把这种分开来处理的。在目前的实际应用中，结构体系和它构件的相互影响反映在有效长度这一因素上。这一点在社会科学研究技术备忘录第五录摘录中有描述。 尽管结构最大内力和构件最大内力是相互依存的（但不一定共存），应当承认，严格考虑这种相互依存关系，很多结构是不实际的。与此同时，众所周知当遇到复杂框架设计中试图在柱设计时自动弥补整个结构的不稳定（例如通过调整柱的有效长度）是很困难的。因此，社会科学研究委员会建议在实际设计中，这两方面应单独考虑单独构件的稳定性和结构的基础及结构整体稳定性。图28.1就是这种方法的间接分析和设计方法。

在目前的美国钢结构协会荷载抗力系数规范中，分析结构体系的方法是一阶弹性分析或二阶弹性分析。在使用一阶弹性分析时，考虑到二阶效果，一阶力矩都是由B1,B2系数放大。在规范中，所有细部都是从结构体系中独立出来，他们通过细部内力曲线和规范给出的那些隐含二阶效应，非弹性，残余应力和挠度的相互作用设计的。理论解答和实验性数据的拟合曲线得到了柱曲线和梁曲线，同时Kanchanalai发现的所谓“精确”塑性区解决方案的拟合曲线确定了梁柱相互作用方程。 为了证明单个细部内力对整个结构体系的影响，使用了有效长度系数，如图28.2所示。有效长度方法为框架结构提供了一个良好的设计。然而，有效长度方法的

51单片机英文翻译

Single chip brief introduction The monolithic integrated circuit said that the monolithic micro controller, it is not completes some logical function the chip, but integrates a computer system to a chip on. Summary speaking: A chip has become a computer. Its volume is small, the quality is light, and the price cheap, for the study, the application and the development has provided the convenient condition. At the same time, the study use monolithic integrated circuit is understands the computer principle and the structure best choice. The monolithic integrated circuit interior also uses with the computer function similar module, SCM basic component is a central processing unit (CPU in the computing device and controller), read-only memory (usually expressed as a ROM), read-write memory (also known as Random Access Memory MRAM is usually expressed as a RAM) , input / output port (also divided into parallel port and serial port, expressed as I / O port), and so composed. In fact there is also a clock circuit microcontroller, so that during operation and control of the microcontroller, can rhythmic manner. In addition, there are so-called "break system", the system is a "janitor" role, when the microcontroller control object parameters that need to be intervention to reach a particular state, can after this "janitor" communicated to the CPU, so that CPU priorities of the external events to take appropriate counter-measures. what is different is its these part performance is opposite our home-use computer weak many, but the price is also low, generally does not surpass 10 Yuan then ......Made some control electric appliance one kind with it is not the 'very complex work foot, We use now the completely automatic drum washer, the platoon petti-coat pipe: VCD and so on Inside the electrical appliances may see its form! ......It is mainly takes the control section the core part It is one kind of online -like real-time control computer, online -like is the scene control, needs to have the strong antijamming ability, the low cost, this is also and the off-line type computer (for instance home use PC,) main difference The monolithic integrated circuit is depending on the procedure, and may revise. Realizes the different function through the different procedure, particularly special unique some functions, this is other component needs to take the very big effort to be able to achieve, some are the flowered big strength is also very difficult to achieve. One is not the very complex function, if develops in the 50s with the US 74 series, or the 60s's CD4000 series these pure hardware do decides, the electric circuit certainly arc a big PCB board ! But if, if succeeded in the 70s with the US puts in the market the series monolithic integrated circuit, the result will have the huge difference. Because only the monolithic integrated circuit compiles through you the procedure may realize the high intelligence, high efficiency, as well as redundant reliability The CPU is the key component of a digital computer. Its purpose is to decode instruction received from memory and perform transfers, arithmetic, logic, and control operations with data stored in internal registers, memory, or I/O interface units. Externally, the CPU provides one or more buses for transferring instructions, data, and control information to and from components connected to it. A microcontroller is present in the keyboard and in the monitor in the generic computer; thus these components are also shaded. In such microcontrollers, the CPU may be quite different from those discussed in this chapter. The word lengths may be short, the number of registers small, and the instruction sets limited. Performance, relatively speaking, is poor, but adequate for the task. Most

毕业设计英文翻译资料(中文)

故障概率模型的数控车床 摘要：领域的失效分析被计算机数字化控制（CNC）车床描述。现场收集了为期两年的约80台数控车床的故障数据。编码系统代码失效数据是制定和失效分析数据库成立的数控车床。失败的位置和子系统，失效模式及原因进行了分析，以显示薄弱子系统的数控车床。另外，故障的概率模型，分析了数控车床的模糊多准则综合评价。 作者关键词：数控车床；场失败；概率模型；模糊信息 文章概述 1.介绍 2. CNC车床的概述 3.收集和整理数据 3.1. 收集数据 3.2. 领域失效数据的有效性 3.3. 数据核对和数据库 4. 失效分析 4.1. 对失败位置和子系统的频率分析 4.2. 对失败形式的频率分析 5.失败机率模型 5.1. 方法学 5.2. 分布倍之间连续的失败 5.3. 修理时间的发行 6.结论 1.介绍 在过去十年中，计算机数字化控制（CNC）车床已经越来越多地被引入到机械加工过程中。由于其固有的灵活性很大，稳定的加工精度和高生产率，数控车床是能给用户巨大的利益。然而，作为一个单一的数控车床故障也许会导致整个生产车间被停止，而且维修更加困难和昂贵，当故障发生时[1]，数控车床能够给用户带来很多的麻烦。 与此同时，制造商还需要持续改进数控车床的可靠性来提高市场的竞争力。因此，数控车床的可靠性能使生产商和用户增加显著性和至关重要的意义。 需要改进数控车床的可靠性，使用户和制造商收集和分析领域的故障数据和采取措施减少停机时间。本文论述了研究失效模式及原因，失效的位置和薄弱的子系统，故障概率模型的数控车床。

图1 系统框图的数控车床 机械系统包括主轴及其传动链（固定在主轴箱），两根滑动轴（命名X、Z或者U，W在轮），车床拖板箱，转动架或刀架，尾座，床身等。主轴持续或加强连续变速，驱动交流或直流主轴电机直接或通过主传动，并有一个光电编码器的主轴车削螺纹。X和Z 两根轴的驱动交流或直流伺服车削螺纹和控制同时进行。该转动架或刀架可自动交换工

毕设英文翻译英文版

72页 Machine Tools Objectived. Machine tools are the main engines of the manufacturing industry. This chapter covers a few of the details that are common to all classes of machine tools discussed in this book. After completing the chapter, the reader will be able to >understand the classification of the various machine tools used in manufacturing industries. >identify the differences between generating and forming of surfaces. > identify various methods used to generate different types of surfaces. >distinguish between the different accuracies and surface finishes that are achievable with different machine tools. >understand the different components of the machine tools and their functions. >learn about the different support structures used in the machine tools. >understand the various actuation systems that are useful to generate the required surfaces. >Learn the different types of guideways used in the machine tools. >understand the work holding requirements. 3.1 INTRODUCTION The earliest known machine tools are the Egyptian foot-operated lathes.

51单片机英文翻译 初稿

1. About SCM It can be said across the twentieth century, the three "electric" era, that is, electrical era, the electronic age, and has now entered the computer age. However, such a computer, usually refers to the personal computer, referred to as PC. It consists of the host, keyboard, monitor etc.. Another type of computer, most people do not know how. This computer is to smart to give a variety of mechanical microcontroller (also known as micro-controller). As the name suggests, this computer system only used the smallest one IC, you can perform simple operations and control. Because of its small size, usually hidden in a charged mechanical "stomach" Lane. It is the entire device, like the human brain plays a role, it goes wrong, the whole device was paralyzed. Now, this MCU has a very wide field of use, such as smart meters, real-time industrial control, communications equipment, navigation systems, home appliances and so on. Once the microcontroller were using a variety of products, you can serve to upgrade the effectiveness of the product, often in the product name is preceded by the adjective - "smart", such as washing machines and so intelligent. At present, some technical personnel of factories or other amateur electronics developers to engage in out of certain products, not the circuit is too complex, that is, functions are too simple and easy to be copied. The reason may be stuck in the product without the use of a microcontroller or other programmable logic device. SCM basic component is a central processing unit (CPU in the computing device and controller), read-only memory (usually expressed as a ROM), read-write memory (also known as Random Access Memory MRAM is usually expressed as a RAM) , input / output port (also divided into parallel port and serial port, expressed as I / O port), and so composed. In fact there is also a clock circuit microcontroller, so that during operation and control of the microcontroller, can rhythmic manner. In addition, there are so-called "break system", the system is a "janitor" role, when the microcontroller control object parameters that need to be intervention to reach a particular state, can after this "janitor" communicated to the CPU, so that CPU priorities of the external events to take appropriate counter-measures. 单片机的简介 可以说，二十世纪跨越了三个“电”的时代，即电气时代、电子时代和现已进入的电脑时代。不过，这种电脑，通常是指个人计算机，简称PC机。它由主机、键盘、显示器等组成。还有一类计算机，大多数人却不怎么熟悉。这种计算机就是把智能赋予各种机械的单片机（亦称微控制器）。顾名思义，这种计算机的最小系统只用了一片集成电路，即可进行简单运算和控制。因为它体积小，通常都藏在被控机械的“肚子”里。它在整个装置中，起着有如人类头脑的作用，它出了毛病，整个装置就瘫痪了。

毕业设计英文翻译1

Center Lathe 4.1 INTRODUCTION Lathe is the oldest machine tool invented, starting with the Egyptian tree lathes. In the Egyptian tree lathe, one end of the rope wound round the workpiece is attached to a flexible branch of a tree while the other end is pulled by the operator, thus giving the rotary motion to the workpiece. This primitive device has evolved over the last two centuries to be one of the most fundamental and versatile machine tools with a large number of uses in all manufacturing shops. The principal form of surface produced in a lathe is the cylindrical surface. This is achieved by rotating the workpiece while the single point cutting tool removes the material by traversing in a direction parallel to the axis of rotation and termed as turning as shown in Fig.4.1.The popularity of the lathe due to the fact that a large variety of surfaces can be produced. Different types of lathes are used in manufacturing shops. Some of them are: (a)Centre lathe (b)Tool room lathes (c)Special purpose lathes (d)Copying lathe (e)Gap bed lathe (f)Capstan and turret lathes (g)Automatic lathes The centre lathe is the most common lathe which derives its name from the way a workpiece is clamped by centres in a lathe, though this is not the only way in which the job is mounted. This is sometimes also called as engine lathe in view of the fact that early lathes were driven by steam engines. This is generally used for more general applications and thus the construction of the machine tool is more rigid. The tool room lathe is generally meant for applications of tool making, where the accuracy desired is much higher than that is normally required for general production

毕设外文翻译

英文翻译 题目: 通过分析变压器中溶解气体而进行故障诊断的专家系统 姓名: 宋日成 学院: 工学院 专业: 自动化 班级: 自动化112 班学号: 32211218 指导教师: 陆静职称: 讲师 2015年3月14日 南京农业大学教务处制

An Expert System for Transformer Fault Diagnosis Using Dissolved Gas Analysis W. S. Chan ·Y. L. Xu ·X. L. Ding ·W. J. Dai Received: 9 November 2005 / Accepted: 11 August 2006 / Published online: 7 September 2006? Springer-Verlag 2006 Abstract In order to automate the transformer fault diagnosis, improve the accuracy of judgment, the introduction of artificial intelligence expert system fault diagnosis. The system is based on fuzzy reasoning confidence by observing the information, the use of knowledge to reach a conclusion. Test proved this method reduces the randomness of judgment, improved diagnosis. Keywords:Expert System Transformer Troubleshooting 1 Introduction The power transformer is a major apparatus in a power system, and its correct functioning is vital to system operations. In order to minimize system outages,many devices have evolved to monitor the serviceability of power transformers. These devices, such as, Buchholz relays or differential relays, respond only to a severe power failure requiring immediate removal of the transformer from service, in which case, outages are inevitable. Thus, preventive techniques for early detection faults to avoid outages would be valuable. In this way, analysis of the mixture of the faulty gases dissolved in insulation oil of power transformer has received worldwide recognition as an effective method for the detection of incipient faults. Many researchers and electrical utilities have reported on their experience and developed interpretative criteria on the basis of DGA. However, criteria tend to vary from utility to utility. Each approach has limitations and none of them has a firm mathematical description. Therefore, transformer diagnosis is still in the heuristic stage. For this reason, knowledge-based programming is a suitable approach to implement in such a diagnostic problem. Based on the interpretation of DGA, a prototype of an expert system for diagnosis of suspected transformer faults and their maintenance procedures is proposed. The significant source in this knowledge base is the gas ratio method. Some limitations of this approach are overcome by incorporating the diagnostic procedure and the synthetic expertise method. Furthermore, data bases adopted from TPCS gas records of transformers are incorporated into the expert system to increase the practical performance. Uncertainty of diagnosis is managed by using fuzzy set concepts. This expert system is constructed with rule based knowledge representation, since it can be expressed by experts. The expert system building tool, Knowledge Engineering System (KES), is used in the development of the knowledge system

毕业设计外文翻译格式实例.

理工学院毕业设计(论文)外文资料翻译 专业：热能与动力工程 姓名：赵海潮 学号：09L0504133 外文出处：Applied Acoustics, 2010(71):701~707 附件： 1.外文资料翻译译文；2.外文原文。

附件1：外文资料翻译译文 基于一维CFD模型下汽车排气消声器的实验研究与预测Takeshi Yasuda, Chaoqun Wua, Noritoshi Nakagawa, Kazuteru Nagamura 摘要目前，利用实验和数值分析法对商用汽车消声器在宽开口喉部加速状态下的排气噪声进行了研究。在加热工况下发动机转速从1000转/分钟加速到6000转/分钟需要30秒。假定其排气消声器的瞬时声学特性符合一维计算流体力学模型。为了验证模拟仿真的结果，我们在符合日本工业标准（JIS D 1616）的消声室内测量了排气消声器的瞬态声学特性，结果发现在二阶发动机转速频率下仿真结果和实验结果非常吻合。但在发动机高阶转速下（从5000到6000转每分钟的四阶转速，从4200到6000转每分钟的六阶转速这样的高转速范围内），计算结果和实验结果出现了较大差异。根据结果分析，差异的产生是由于在模拟仿真中忽略了流动噪声的影响。为了满足市场需求，研究者在一维计算流体力学模型的基础上提出了一个具有可靠准确度的简化模型，相对标准化模型而言该模型能节省超过90％的执行时间。 关键字消声器排气噪声优化设计瞬态声学性能 1 引言 汽车排气消声器广泛用于减小汽车发动机及汽车其他主要部位产生的噪声。一般而言，消声器的设计应该满足以下两个条件：（1）能够衰减高频噪声，这是消声器的最基本要求。排气消声器应该有特定的消声频率范围，尤其是低频率范围，因为我们都知道大部分的噪声被限制在发动机的转动频率和它的前几阶范围内。（2）最小背压，背压代表施加在发动机排气消声器上额外的静压力。最小背压应该保持在最低限度内，因为大的背压会降低容积效率和提高耗油量。对消声器而言，这两个重要的设计要求往往是互相冲突的。对于给定的消声器，利用实验的方法，根据距离尾管500毫米且与尾管轴向成45°处声压等级相近的排气噪声来评估其噪声衰减性能，利用压力传感器可以很容易地检测背压。 近几十年来，在预测排气噪声方面广泛应用的方法有：传递矩阵法、有限元法、边界元法和计算流体力学法。其中最常用的方法是传递矩阵法（也叫四端网络法）。该方

单片机外文翻译--STC89C52处理芯片

外文资料翻译 STC89C52 processi ng chip Prime features: With MCS - 51 SCM product compatibility, 8K bytes in the system programmable Flash memory, 1000 times CaXie cycle, the static operation: 0Hz ~ 33Hz, triple encryption program memory, 32 programmed I/O port, three 16 timer/counter, the eight uninterrupted dual-career UART serial passage, low power consumption, leisure and fall after fall electric power mode can be awakened and continuous watchdog timer and double-number poin ter, power ide ntifier. Efficacy: characteristics STC89C52 is one kind of low power consumption, high CMOS8 bit micro-co ntroller, 8K in system programmable Flash memory. Use high-de nsity nonv olatile storage tech no logy, and in dustrial 80C51 product in structi on and pin fully compatible. The Flash memory chips allows programs in the system, also suitable for programmable conventional programming. In a single chip, have clever 8 bits CPU and on li ne system programmable Flash, in crease STC89C52 for many embedded control system to provide high vigorous application and useful solutions. STC89C52 has following standard efficacy: 8k byte Flash RAM, 256 bytes, 32 I/O port, the watchdog timer, two, three pointer numerical 16 timer/counter, a 6 vector level 2 continuous structure, the serial port, working within crystals and horological circuit. In addition, 0Hz AT89S52 can drop to the static logic operation, support two software can choose power saving mode. Idle mode, the CPU to stop working, and allows the RAM, timer/c oun ters, serial, continu ous to work. Protectio n asa na patter n, RAM content is survival, vibrators frozen, SCM, until all the work under a continuous or hardware reset. 8-bit microcontrollers 8K bytes in the system programmable Flash AT89S52 devices. Mouth: P0 P0 mouth is a two-way ope n drain I/O. As export, each can drive eight TTL logic level. For P0 port to write "1", foot as the high impeda nee in put. When access to exter nal programs and nu merical memory, also known as