搜档网
当前位置:搜档网 › H3C S3100-8TP-SI交换机调试文档

H3C S3100-8TP-SI交换机调试文档

H3C S3100-8TP-SI交换机的MAC地址怎么与IP地址进行绑定?
si是不支持ip+mac地址绑定的。
需要是si(um)或者ei版本的。
si只支持mac+端口的绑定。
命令是:进入端口视图,使用am user-bing 命令


H3C 3100交换机IP设置步骤
1、 使用随机带的串口线串口端连接计算机串口,RJ45端连接交换机CONSOLE口,设置
超级终端连接计算机串口。
2、 设置交换机系统时间 disp clock ――显示交换机时间 06:42:23 UTC
Sun 04/02/2000 Time Zone : add 00:00:00
clock datetime 18:15:00 2007/06/02 ――设置时间
disp clock ――检查时间是否设置正确
18:16:38 UTC Sat 06/02/2007 TimeZone : add 00:00:00
设置交换机时间完毕
3、 进入系统视图,设置登陆帐号、口令、管理级别以及交换机名
sys
System View: return to User View with Ctrl+Z.
[H3C]user-interface vty 0 4
[H3C-ui-vty0-4]authentication-mode password
[H3C-ui-vty0-4]set authentication password simple xtyz201
[H3C-ui-vty0-4]user privilege level 3
[H3C-ui-vty0-4]quit
[H3C]sysname xtyz201 [xtyz201]
4、 设置管理IP地址和路由信息:
[xtyz201]interface Vlan-interface 1
[xtyz201-Vlan-interface1] %Jun 2 18:21:03:663 2007 xtyz201 L2INF/5/VLANIF LINK STATUS CHANGE:- 1 - Vlan-interface1: is UP
[xtyz201-Vlan-interface1]ip address 10.5.16.201 255.255.255.0
[xtyz201-Vlan-interface1] %Jun 2 18:29:28:617 2007 xtyz201 IFNET/5/UPDOWN:- 1 -Line
protocol on
the inter face
Vlan-interface1 is UP
[xtyz201-Vlan-interface1]quit
[xtyz201]ip route-static 0.0.0.0 0.0.0.0 10.5.16.254
preference 60 [xtyz201]
5、 设置网管相关参数
[xtyz201]snmp-agent community read init.r
[xtyz201]snmp-agent community write init.w
[xtyz201]snmp-agent sys-info version all
[xtyz201]
6、 设置WEB登陆方式:
[xtyz201]local-user admin
[xtyz201-luser-admin]password simple xtyz201
[xtyz201-luser-admin]service-type telnet level 3
[xtyz201-luser-admin]quit

7、 存储刚才的设置:
save The
configuration will be written to the device.
Are you sure?[Y/N]y
Please input the file
name(*.cfg)(To leave the existing filename unchanged press the enter key): Now saving current configuration to the device.
Saving configuration.
Please wait... ...... Unit1
save configuration
flash:/config.cfg
successfully %Jun 2 18:32:15:647 2007 xtyz201
CFM/3/CFM_LOG:- 1 -Unit1
save configuration
su ccessfully. 8

相关主题