搜档网
当前位置:搜档网 › 最新土木工程外文翻译

最新土木工程外文翻译

最新土木工程外文翻译
最新土木工程外文翻译

论高层剪力墙建筑施工中的技术管理要点

引言

在高层剪力墙建筑的施工中,技术管理是施工管理过程中的重要环节,施工中的质量、本钱、平安、进度均与技术管理严密相连。因而,只要搞好技术管理,才干控制高层剪力墙建筑施工的技术要点。

本文就高层剪力墙建筑施工中的技术管理要点作一引见。

施工管理目的确实定普通状况下,建筑工程施工管理的目的主要表如今以下几个方面:设计图纸中呈现的问题必需提早处理,以免影响建筑工程的正常施工。

分局部项工程必需事前停止细致的、有针对性的技术平安交底。

施工计划的编制要科学、适用、经济,并停止动态管理,以利于及时优化。

技术档案材料要搜集齐全,整理划一,做到与工程同步。

积极推行和应用新技术、新工艺、新资料,使其成为降低工程本钱的手腕。

为完成目的而制定的管理措施.图纸会审、设计变卦的签定检查施工图时,要从以下几方面人手:

先检查建筑施工图,初步理解工程的概略、工程作法、功用和门窗的详细位置。

复核建筑尺寸、标高等。

再检查构造图,校核尺寸、标高,并思索配筋能否合理。

将建施图与结施图对照校核。

在检查图的同时要思索细部的施工计划。

及时同设计人员沟通。

在井泓房地产高层住宅楼的施工中,施工单位在图纸中共发现问题8O余处,并及时纠正了错误,防止了许多不用要的经济损失。

技术交底要精确到位分局部项工程技术交底的内容要细致,特别是关键部位的处置措施、施工留意事项、工程质量请求等均要写分明。

做好与工长、劳务队班长的沟通、交流工作,确保交底内容精确无误。

施工计划的选择和优化施工计划的正确与否直接关系到工程的施工进度、质量和工程本钱的上下,因此施工计划确实定与选择就成为技术管理的重点。要精确肯定高层建筑的施工计划,必需对工程的周边环境、施工进度、质量规范等停止全方位的理解,并在施工过程中不时地总结经历,勤考虑、善打破,多构思几套施工计划,加以比拟,优化施行。在井泓高层住宅楼施工中,主要思索了以下几项细部计划。

土方开挖计划的选择依据工程的特性和周边环境的状况,施工单位分层选用了大小发掘机停止开挖,桩顶土.1 m厚约5 000 m ,用大的履带式反铲机开挖;桩间土约4 751 m ,比拟规整,采用小反铲发掘机配合人工挖土,这样相比,单纯的人工挖土能够进步工效;依据详细状况,分别肯定了开挖方向,行车道路;劳务队应用了CFG桩的布置方位,特制了的挖斗,到达了进步工效的目的。

理论证明,该工程采用了上述计划后,开挖土方,破桩1 201根(约166 m ),工期共计9 d,投入机械台班31个,劳力405个工日,而预算需投入机械台班41个,劳力996个工日,节约工程本钱约2.O3万元。

转料平台搭设计划高层建筑的转料平台是应用频率最高的施工部位,转料平台的结实性和便当性直接关系到工程能否按工期顺利停止。经研讨,该工程否认了应用简易钢管扣件搭设挑架式转料平台的计划,而是采用两根号槽钢作主梁,8号槽钢作次梁,间距1 m,伸人室内1.5 m,主梁端部和中部用16号钢丝绳斜向上拉固定,上铺竹架板,四周焊栏杆围护的

特制转料平台,并细致地停止了位置的布置,全方位地满足了施工需求,节约了本钱,起到了双赢的成效。

模板计划的选定该工程为全剪力墙构造,平面设计以伸缩缝为界,对称布置,每层剪力墙面积3 600 1TI 。鉴于这种状况,思索采用大钢模系统。这样做,在工期和施工本钱的降低上均优于小钢模系统和竹胶模板系统。

因而,该工程决议采取大钢模系统,采用传统的型钢背楞与6 mm厚的钢板板面焊接而成。

该工程在装置模板时,又在细部采取了相应的技术措施,如设置伸缩缝、为确保墙体的截面尺寸采取措施等。

伸缩缝的设置:该工程伸缩缝宽30 cm,长.4 1TI,采用聚苯板替代模板,共需聚苯板235 1TI 。

为理解决操作不便的问题,采取穿墙螺栓用两边均为丝扣衔接螺杆,预先将螺杆焊在垫片,再将垫片焊在伸缩缝处装置的大模板纵肋上并固定,待墙体内外模板吊装就位后,再将螺杆从里侧穿人并加固。

拆模时,松动里侧螺帽,旋转拆出螺杆,既便当又省力。

为确保墙体的截面尺寸采取的措施:在暗柱箍筋上或墙体程度筋上点焊 12 mm的钢筋,钢筋长度比墙厚小2 mm,其布置办法为:竖向根部距空中15~20 cm处(即第一道箍筋处),顶部位于最顶一道箍筋处,每块大模板程度方向只需焊接3根既两端与中间部位)。这样,经过加固确保了剪力墙的几何尺寸。

档案材料的搜集与整理材料的搜集主要从以下几方面着手:

熟习材料,整理目录。

填写要认真细致、内容齐全。

搜集工作要及时精确,并附有必要的书面通知。

“保证材料”局部要控制好所代表的批量和运用部位并填写正确。

要树立好材料搜集台帐,便于查找和运用。

为业主和监理单位送达的材料应请求承受人签收,以防事后对方不予认可。

在材料的整理过程中,若没有相应的规则表格,则应有合适本工程的材料方式。

作为施工企业现场技术管理的重点内容,施工现场签证要有相应的方式、办法和技巧。

依据以往的经历和山西建筑市场的现状,现场签证应留意以下几方面的问题:

要熟习和控制本工程的合同、标准、定额和施工图纸。

在办理签证前,要先经过造价的计算,准备好实践签证时造价的计取方式。

若定额中没有相应子目的局部,要签定定包价,以防为日后的完工结算留下后患。

签证量较大时,或触及到造价调整较大的签证,要化整为零,考究签定的艺术性。

对管理不标准的建立单位拒不签认的状况下,应树立文件的送达台帐,并采用坦率的方式想方法处理。

作为施工现场的技术人员,要全面理解签证双方的状况。

关于因设计缘由和业主缘由形成的返工项目,要在事前或规则的时间内停止签证,若对方拒不签认,要及时停工并将施工的项目和部位应用图片等方式记载下来,以备后用。

关于施工签证的办理,施工企业的技术人员、预结算人员、工长要结合停止办理,避免丢漏和无法计价等状况的发作。

积极推行和应用新技术、新工艺、新资料在高层建筑的施工过程中,积极地推行和应用新技术、新工艺、新资料显得特别重要。在井泓高层住宅楼施工中,主要运用了以下几项新措施:

关于冷扎扭钢筋、电渣压力焊、竹胶模等,应纯熟控制技术要领,并理解其质量预控的

重要环节,即要认真、细致地停止技术交底,使工人明白技术要点、工艺规范和质量规范,为工程各项指标的顺利完成奠定良好的根底。

关于新技术、新工艺等的应用,要提早细致查看和研讨该方面的材料,并分离工程的详细状况,纯熟控制操作要领和施工中的留意事项,并对现场施工人员停止细致的交底和恰当的培训。如在外墙保温板上抹灰,常见的质量通病是外表龟裂。为了预防这一质量通病,采用泥砂浆EC抗裂剂及聚合物砂浆,既改良了外墙聚苯板保温层的抹灰工艺,又降低了施工工程的本钱。

外墙聚苯板保温层的抹灰工艺为:

将钢丝网架聚苯板与基层固定结实(阴、阳角处及聚苯板接缝处必需加钢丝网)。

保温板上刷一层界面处置剂。

厚的1:3水泥砂浆打底(水泥砂浆内掺抗裂剂)。

厚的1:3水泥砂浆找平(水泥砂浆内掺抗裂剂)。

厚的聚合物抗裂砂浆,外表夹一层玻璃网格布,压实赶光(玻璃网格布为耐碱性)。

喷涂外墙涂料。

结语在高层建筑施工中,一定要纯熟控制施工技术管理要点。只要控制好各种管理要点,才干控制了施工的主线。此外,还要应用新技术、新工艺、新资料,控制高层剪力墙建筑的垂直度、剪力墙的平整度以及外墙裂痕等技术控制难点,节约资金投入,降低工程本钱,为企业取得更大的经济效益。

On the main points of the technical management of the high-rise shear wall construction

Introduction

In the construction of high-rise shear wall buildings, technology management is an important link in the process of construction management, construction quality, capital, peace,progress and technology management closely connected. Thus, as long as do a good job intechnology management, ability to control the high-rise shear wall construction techniques.

In this paper, the points of the technical management of high-rise shear wall construction fora introductions.

The purpose of construction management is indeed given the ordinary situation, the main purpose of building construction management table now the following aspects:

The issues presented in the design drawings necessary for early treatment, so as not to affect the normal construction of the building works.

Branch of the Ministry of works necessary prior to stop detailed, targeted technology safelytell smb. What one's real intentions are.

The preparation of construction plans science, applicable to, economic, and stop thedynamic management, in order to facilitate timely optimization.

Technical archival material to collect complete and collate a uniform, to achievesynchronization with the project.

Implementation and application of new technologies, new processes, new information, making it the wrist to reduce project capital.

Developed for the completion of the purpose and management measures. Drawings reviewing the design changed their mind and signed a check on the construction plans,staffing, from the following aspects:

First check the construction plans, preliminary understanding of the detailed position of thebroad engineering, engineering practice, the function of windows and doors.

Review of building size, elevation, and so on.

And then check the structural map, checking the size, elevation, and thinking can reasonably reinforcement.

Built facilities map and statement Shi Figure control check.

Check the map at the same time to think about the detailed construction plans.

Timely communication with the designers.

Well Hung real estate high-rise residential building construction, the construction unit in thedrawings the Chinese Communists find I 8O at the problem, and promptly corrected theerror, to prevent economic losses do not want to.

Technical tests to accurately place the contents of the technical disclosure of the Branch ofthe Ministry of project to be careful, in particular, is a key part of measures to deal with, construction and attention to matters, the quality of the project requests, etc. to write clearly.

Good communication with the foreman, labor team squad, exchange, ensure precise Jiaodicontent.

Selection and optimization of the construction plans of construction program is correct or not directly related to the project's construction schedule, quality and engineering capital ofthe upper and lower construction plans indeed given the choice to become the focus oftechnology management. To be precise affirmation of high-rise building construction plan, it is necessary to stop the all-round understanding of the surrounding environment of theproject, construction progress, quality specifications, and summary of experience in the construction process from time to time, to consider diligence, good break, the idea of several sets of construction plans analogy, optimization purposes. Well Hung high-rise residential building construction, mainly thinking about the following detailed plans.

Choice of earth excavation plan based on the engineering characteristics and surrounding environment conditions, the construction unit stratified selection of the size of the excavationmachine to stop excavation, pile top soil. 1 m thick and 5 000 m, with large crawler backhoemachine excavation; soil between piles of about 4 751 m, unmatched structured, using asmall backhoe excavation machine and in conjunction with excavation, so that compared toa simple artificial excavation I can still improve efficiency; in accordance with detailedconditions, respectively, confirmed the excavation direction, carriageways; application ofCFG pile layout orientation to the labor team, a special bucket to reach the goal of progressergonomics. Theoretical proof that the project using the above scheme, the excavation of earth, brokenpiles 1 201 (about 166 m), the duration of a total of 9 d, input Jixietaiban 31, 405 labor-days, and the budget required to put the mechanical unitsClass 41, 996 labor-days, savingabout 2 of the project capital. O3 ten thousand yuan.

The transfer material platform turn feeding platform erection of the planned high-rise building construction site of the applied frequency, the transfer material platform of strongand lunch is directly related to the project can be successfully stopped according toduration. After discussion, the project has denied the application of simple steel fastenerserection pick rack plans to turn the feeding platform, instead of using two No. channelprimary beam, on the 8th channel beam spacing of 1 m, Nobuhito indoor 1 .5 m, the mainbeam ends and central pull on the rope inclined to use the 16th fixed, capped with laddersboard, welding railings around the building envelope, the special transfer material platform,and was careful to stop the layout of the location, to meet construction needs, savingcapital, played a win-win results.

The selected template plan the project for the whole shear wall constructed, the expansion joints for the graphic design, are arranged symmetrically on each shear wall area of 3 6001TI. Given this situation, thinking the large steel system. In doing so, the reduction of theduration and construction of capital are better than the system of small steel and bamboorubber template system.

Thus, the project decided to adopt the system of large steel welded using traditional steelback shocked with a 6 mm thick steel plate surface.

Of the project in the device template in detail to take appropriate technical measures, such as installing expansion joints, and take measures to ensure that the wall section size.

The set of joints: the project expansion joint width of 30 cm long. 4 1TI, polystyrene boardreplacement templates, the totaling polystyrene board 235 1TI.

Management to solve the problem of the maneuver, taken through the wall bolt convergencescrew are threaded on both sides, pre-welded on the screw gasket, and then the gasketwelding on the expansion joints at the device template longitudinal ribs and fixed,until

土木工程外文翻译.doc

项目成本控制 一、引言 项目是企业形象的窗口和效益的源泉。随着市场竞争日趋激烈,工程质量、文明施工要求不断提高,材料价格波动起伏,以及其他种种不确定因素的影响,使得项目运作处于较为严峻的环境之中。由此可见项目的成本控制是贯穿在工程建设自招投标阶段直到竣工验收的全过程,它是企业全面成本管理的重要环节,必须在组织和控制措施上给于高度的重视,以期达到提高企业经济效益的目的。 二、概述 工程施工项目成本控制,指在项目成本在成本发生和形成过程中,对生产经营所消耗的人力资源、物资资源和费用开支,进行指导、监督、调节和限制,及时预防、发现和纠正偏差从而把各项费用控制在计划成本的预定目标之内,以达到保证企业生产经营效益的目的。 三、施工企业成本控制原则 施工企业的成本控制是以施工项目成本控制为中心,施工项目成本控制原则是企业成本管理的基础和核心,施工企业项目经理部在对项目施工过程进行成本控制时,必须遵循以下基本原则。 3.1 成本最低化原则。施工项目成本控制的根本目的,在于通过成本管理的各种手段,促进不断降低施工项目成本,以达到可能实现最低的目标成本的要求。在实行成本最低化原则时,应注意降低成本的可能性和合理的成本最低化。一方面挖掘各种降低成本的能力,使可能性变为现实;另一方面要从实际出发,制定通过主观努力可能达到合理的最低成本水平。 3.2 全面成本控制原则。全面成本管理是全企业、全员和全过程的管理,亦称“三全”管理。项目成本的全员控制有一个系统的实质性内容,包括各部门、各单位的责任网络和班组经济核算等等,应防止成本控制人人有责,人人不管。项目成本的全过程控制要求成本控制工作要随着项目施工进展的各个阶段连续 进行,既不能疏漏,又不能时紧时松,应使施工项目成本自始至终置于有效的控制之下。 3.3 动态控制原则。施工项目是一次性的,成本控制应强调项目的中间控制,即动态控制。因为施工准备阶段的成本控制只是根据施工组织设计的具体内容确

土木工程类专业英文文献及翻译

PA VEMENT PROBLEMS CAUSED BY COLLAPSIBLE SUBGRADES By Sandra L. Houston,1 Associate Member, ASCE (Reviewed by the Highway Division) ABSTRACT: Problem subgrade materials consisting of collapsible soils are com- mon in arid environments, which have climatic conditions and depositional and weathering processes favorable to their formation. Included herein is a discussion of predictive techniques that use commonly available laboratory equipment and testing methods for obtaining reliable estimates of the volume change for these problem soils. A method for predicting relevant stresses and corresponding collapse strains for typical pavement subgrades is presented. Relatively simple methods of evaluating potential volume change, based on results of familiar laboratory tests, are used. INTRODUCTION When a soil is given free access to water, it may decrease in volume, increase in volume, or do nothing. A soil that increases in volume is called a swelling or expansive soil, and a soil that decreases in volume is called a collapsible soil. The amount of volume change that occurs depends on the soil type and structure, the initial soil density, the imposed stress state, and the degree and extent of wetting. Subgrade materials comprised of soils that change volume upon wetting have caused distress to highways since the be- ginning of the professional practice and have cost many millions of dollars in roadway repairs. The prediction of the volume changes that may occur in the field is the first step in making an economic decision for dealing with these problem subgrade materials. Each project will have different design considerations, economic con- straints, and risk factors that will have to be taken into account. However, with a reliable method for making volume change predictions, the best design relative to the subgrade soils becomes a matter of economic comparison, and a much more rational design approach may be made. For example, typical techniques for dealing with expansive clays include: (1) In situ treatments with substances such as lime, cement, or fly-ash; (2) seepage barriers and/ or drainage systems; or (3) a computing of the serviceability loss and a mod- ification of the design to "accept" the anticipated expansion. In order to make the most economical decision, the amount of volume change (especially non- uniform volume change) must be accurately estimated, and the degree of road roughness evaluated from these data. Similarly, alternative design techniques are available for any roadway problem. The emphasis here will be placed on presenting economical and simple methods for: (1) Determining whether the subgrade materials are collapsible; and (2) estimating the amount of volume change that is likely to occur in the 'Asst. Prof., Ctr. for Advanced Res. in Transp., Arizona State Univ., Tempe, AZ 85287. Note. Discussion open until April 1, 1989. To extend the closing date one month,

土木工程外文翻译

转型衰退时期的土木工程研究 Sergios Lambropoulosa[1], John-Paris Pantouvakisb, Marina Marinellic 摘要 最近的全球经济和金融危机导致许多国家的经济陷入衰退,特别是在欧盟的周边。这些国家目前面临的民用建筑基础设施的公共投资和私人投资显著收缩,导致在民事特别是在民用建筑方向的失业。因此,在所有国家在经济衰退的专业发展对于土木工程应届毕业生来说是努力和资历的不相称的研究,因为他们很少有机会在实践中积累经验和知识,这些逐渐成为过时的经验和知识。在这种情况下,对于技术性大学在国家经济衰退的计划和实施的土木工程研究大纲的一个实质性的改革势在必行。目的是使毕业生拓宽他们的专业活动的范围,提高他们的就业能力。 在本文中,提出了土木工程研究课程的不断扩大,特别是在发展的光毕业生的潜在的项目,计划和投资组合管理。在这个方向上,一个全面的文献回顾,包括ASCE体为第二十一世纪,IPMA的能力的基础知识,建议在其他:显著增加所提供的模块和项目管理在战略管理中添加新的模块,领导行为,配送管理,组织和环境等;提供足够的专业训练五年的大学的研究;并由专业机构促进应届大学生认证。建议通过改革教学大纲为土木工程研究目前由国家技术提供了例证雅典大学。 1引言 土木工程研究(CES)蓬勃发展,是在第二次世界大战后。土木工程师的出现最初是由重建被摧毁的巨大需求所致,目的是更多和更好的社会追求。但是很快,这种演变一个长期的趋势,因为政府为了努力实现经济发展,采取了全世界的凯恩斯主义的理论,即公共基础设施投资作为动力。首先积极的结果导致公民为了更好的生活条件(住房,旅游等)和增加私人投资基础设施而创造机会。这些现象再国家的发展中尤为为明显。虽然前景并不明朗(例如,世界石油危机在70年代),在80年代领先的国家采用新自由主义经济的方法(如里根经济政策),这是最近的金融危机及金融危机造成的后果(即收缩的基础设施投资,在技术部门的高失业率),消除发展前途无限的误区。 技术教育的大学所认可的大量研究土木工程部。旧学校拓展专业并且新的学校建成,并招收许多学生。由于高的职业声望,薪酬,吸引高质量的学校的学生。在工程量的增加和科学技术的发展,导致到极强的专业性,无论是在研究还是工作当中。结构工程师,液压工程师,交通工程师等,都属于土木工程。试图在不同的国家采用专业性的权利,不同的解决方案,,从一个统一的大学学历和广泛的专业化的一般职业许可证。这个问题在许多其他行业成为关键。国际专业协会的专家和机构所确定的国家性检查机构,经过考试后,他们证明不仅是行业的新来者,而且专家通过时间来确定进展情况。尽管在很多情况下,这些证书虽然没有国家接受,他们赞赏和公认的世界。 在试图改革大学研究(不仅在土木工程)更接近市场需求的过程中,欧盟确定了1999博洛尼亚宣言,它引入了一个二能级系统。第一级度(例如,一个三年的学士)是进入

土木工程外文文献翻译

专业资料 学院: 专业:土木工程 姓名: 学号: 外文出处:Structural Systems to resist (用外文写) Lateral loads 附件:1.外文资料翻译译文;2.外文原文。

附件1:外文资料翻译译文 抗侧向荷载的结构体系 常用的结构体系 若已测出荷载量达数千万磅重,那么在高层建筑设计中就没有多少可以进行极其复杂的构思余地了。确实,较好的高层建筑普遍具有构思简单、表现明晰的特点。 这并不是说没有进行宏观构思的余地。实际上,正是因为有了这种宏观的构思,新奇的高层建筑体系才得以发展,可能更重要的是:几年以前才出现的一些新概念在今天的技术中已经变得平常了。 如果忽略一些与建筑材料密切相关的概念不谈,高层建筑里最为常用的结构体系便可分为如下几类: 1.抗弯矩框架。 2.支撑框架,包括偏心支撑框架。 3.剪力墙,包括钢板剪力墙。 4.筒中框架。 5.筒中筒结构。 6.核心交互结构。 7. 框格体系或束筒体系。 特别是由于最近趋向于更复杂的建筑形式,同时也需要增加刚度以抵抗几力和地震力,大多数高层建筑都具有由框架、支撑构架、剪力墙和相关体系相结合而构成的体系。而且,就较高的建筑物而言,大多数都是由交互式构件组成三维陈列。 将这些构件结合起来的方法正是高层建筑设计方法的本质。其结合方式需要在考虑环境、功能和费用后再发展,以便提供促使建筑发展达到新高度的有效结构。这并

不是说富于想象力的结构设计就能够创造出伟大建筑。正相反,有许多例优美的建筑仅得到结构工程师适当的支持就被创造出来了,然而,如果没有天赋甚厚的建筑师的创造力的指导,那么,得以发展的就只能是好的结构,并非是伟大的建筑。无论如何,要想创造出高层建筑真正非凡的设计,两者都需要最好的。 虽然在文献中通常可以见到有关这七种体系的全面性讨论,但是在这里还值得进一步讨论。设计方法的本质贯穿于整个讨论。设计方法的本质贯穿于整个讨论中。 抗弯矩框架 抗弯矩框架也许是低,中高度的建筑中常用的体系,它具有线性水平构件和垂直构件在接头处基本刚接之特点。这种框架用作独立的体系,或者和其他体系结合起来使用,以便提供所需要水平荷载抵抗力。对于较高的高层建筑,可能会发现该本系不宜作为独立体系,这是因为在侧向力的作用下难以调动足够的刚度。 我们可以利用STRESS,STRUDL 或者其他大量合适的计算机程序进行结构分析。所谓的门架法分析或悬臂法分析在当今的技术中无一席之地,由于柱梁节点固有柔性,并且由于初步设计应该力求突出体系的弱点,所以在初析中使用框架的中心距尺寸设计是司空惯的。当然,在设计的后期阶段,实际地评价结点的变形很有必要。 支撑框架 支撑框架实际上刚度比抗弯矩框架强,在高层建筑中也得到更广泛的应用。这种体系以其结点处铰接或则接的线性水平构件、垂直构件和斜撑构件而具特色,它通常与其他体系共同用于较高的建筑,并且作为一种独立的体系用在低、中高度的建筑中。

土木工程岩土类毕业设计外文翻译

姓名: 学号: 10447425 X X 大学 毕业设计(论文)外文翻译 (2014届) 外文题目Developments in excavation bracing systems 译文题目开挖工程支撑体系的发展 外文出处Tunnelling and Underground Space Technology 31 (2012) 107–116 学生XXX 学院XXXX 专业班级XXXXX 校内指导教师XXX 专业技术职务XXXXX 校外指导老师专业技术职务 二○一三年十二月

开挖工程支撑体系的发展 1.引言 几乎所有土木工程建设项目(如建筑物,道路,隧道,桥梁,污水处理厂,管道,下水道)都涉及泥土挖掘的一些工程量。往往由于由相邻的结构,特性线,或使用权空间的限制,必须要一个土地固定系统,以允许土壤被挖掘到所需的深度。历史上,许多挖掘支撑系统已经开发出来。其中,现在比较常见的几种方法是:板桩,钻孔桩墙,泥浆墙。 土地固定系统的选择是由技术性能要求和施工可行性(例如手段,方法)决定的,包括执行的可靠性,而成本考虑了这些之后,其他问题也得到解决。通常环境后果(用于处理废泥浆和钻井液如监管要求)也非常被关注(邱阳、1998)。 土地固定系统通常是建设项目的较大的一个组成部分。如果不能按时完成项目,将极大地影响总成本。通常首先建造支撑,在许多情况下,临时支撑系统是用于支持在挖掘以允许进行不断施工,直到永久系统被构造。临时系统可以被去除或留在原处。 打桩时,因撞击或振动它们可能会被赶入到位。在一般情况下,振动是最昂贵的方法,但只适合于松散颗粒材料,土壤中具有较高电阻(例如,通过鹅卵石)的不能使用。采用打入桩系统通常是中间的成本和适合于软沉积物(包括粘性和非粘性),只要该矿床是免费的鹅卵石或更大的岩石。 通常,垂直元素(例如桩)的前安装挖掘工程和水平元件(如内部支撑或绑回)被安装为挖掘工程的进行下去,从而限制了跨距长度,以便减少在垂直开发弯矩元素。在填充情况下,桩可先设置,从在斜坡的底部其嵌入悬挑起来,安装作为填充进步水平元素(如搭背或土钉)。如果滞后是用来保持垂直元素之间的土壤中,它被安装为挖掘工程的进行下去,或之前以填补位置。 吉尔- 马丁等人(2010)提供了一个数值计算程序,以获取圆形桩承受轴向载荷和统一标志(如悬臂桩)的单轴弯矩的最佳纵筋。他们开发的两种优化流程:用一个或两个直径为纵向钢筋。优化增强模式允许大量减少的设计要求钢筋的用量,这些减少纵向钢筋可达到50%相对传统的,均匀分布的加固方案。 加固桩集中纵向钢筋最佳的位置在受拉区。除了节约钢筋,所述非对称加强钢筋图案提高抗弯刚度,通过增加转动惯量的转化部分的时刻。这种增加的刚性可能会在一段时间内增加的变形与蠕变相关的费用。评估相对于传统的非对称加强桩的优点,对称,钢筋桩被服务的条件下全面测试来完成的,这种试验是为了验证结构的可行性和取得的变形的原位测量。 基于现场试验中,用于优化的加强图案的优点浇铸钻出孔(CIDH)在巴塞罗那的

土木工程专业外文文献及翻译

( 二 〇 一 二 年 六 月 外文文献及翻译 题 目: About Buiding on the Structure Design 学生姓名: 学 院:土木工程学院 系 别:建筑工程系 专 业:土木工程(建筑工程方向) 班 级:土木08-4班 指导教师:

英文原文: Building construction concrete crack of prevention and processing Abstract The crack problem of concrete is a widespread existence but again difficult in solve of engineering actual problem, this text carried on a study analysis to a little bit familiar crack problem in the concrete engineering, and aim at concrete the circumstance put forward some prevention, processing measure. Keyword:Concrete crack prevention processing Foreword Concrete's ising 1 kind is anticipate by the freestone bone, cement, water and other mixture but formation of the in addition material of quality brittleness not and all material.Because the concrete construction transform with oneself, control etc. a series problem, harden model of in the concrete existence numerous tiny hole, spirit cave and tiny crack, is exactly because these beginning start blemish of existence just make the concrete present one some not and all the characteristic of quality.The tiny crack is a kind of harmless crack and accept concrete heavy, defend Shen and a little bit other use function not a creation to endanger.But after the concrete be subjected to lotus carry, difference in temperature etc. function, tiny crack would continuously of expand with connect, end formation we can see without the

土木工程毕业设计外文文献翻译修订版

土木工程毕业设计外文文献翻译修订版 IBMT standardization office【IBMT5AB-IBMT08-IBMT2C-ZZT18】

外文文献翻译 Reinforced Concrete (来自《土木工程英语》) Concrete and reinforced concrete are used as building materials in every country. In many, including the United States and Canada, reinforced concrete is a dominant structural material in engineered construction. The universal nature of reinforced concrete construction stems from the wide availability of reinforcing bars and the constituents of concrete, gravel, sand, and cement, the relatively simple skills required in concrete construction, and the economy of reinforced concrete compared to other forms of construction. Concrete and reinforced concrete are used in bridges, buildings of all sorts underground structures, water tanks, television towers, offshore oil exploration and production structures, dams, and even in ships. Reinforced concrete structures may be cast-in-place concrete, constructed in their final location, or they may be precast concrete produced in a factory and erected at the construction site. Concrete structures may be severe and functional in design, or the shape and layout and be whimsical and artistic. Few other building materials off the architect and engineer such versatility and scope. Concrete is strong in compression but weak in tension. As a result, cracks develop whenever loads, or restrained shrinkage of temperature changes, give rise to tensile stresses in excess of the tensile strength of the concrete. In

土木工程外文翻译参考3篇

学校 毕业设计(论文)附件 外文文献翻译 学号: xxxxx 姓名: xxx 所在系别: xxxxx 专业班级: xxx 指导教师: xxxx 原文标题: Building construction concrete crack of prevention and processing 2012年月日 .

建筑施工混凝土裂缝的预防与处理1 摘要 混凝土的裂缝问题是一个普遍存在而又难于解决的工程实际问题,本文对混凝土工程中常见的一些裂缝问题进行了探讨分析,并针对具体情况提出了一些预防、处理措施。 关键词:混凝土裂缝预防处理 前言 混凝土是一种由砂石骨料、水泥、水及其他外加材料混合而形成的非均质脆性材料。由于混凝土施工和本身变形、约束等一系列问题,硬化成型的混凝土中存在着众多的微孔隙、气穴和微裂缝,正是由于这些初始缺陷的存在才使混凝土呈现出一些非均质的特性。微裂缝通常是一种无害裂缝,对混凝土的承重、防渗及其他一些使用功能不产生危害。但是在混凝土受到荷载、温差等作用之后,微裂缝就会不断的扩展和连通,最终形成我们肉眼可见的宏观裂缝,也就是混凝土工程中常说的裂缝。 混凝土建筑和构件通常都是带缝工作的,由于裂缝的存在和发展通常会使内部的钢筋等材料产生腐蚀,降低钢筋混凝土材料的承载能力、耐久性及抗渗能力,影响建筑物的外观、使用寿命,严重者将会威胁到人们的生命和财产安全。很多工程的失事都是由于裂缝的不稳定发展所致。近代科学研究和大量的混凝土工程实践证明,在混凝土工程中裂缝问题是不可避免的,在一定的范围内也是可以接受的,只是要采取有效的措施将其危害程度控制在一定的范围之内。钢筋混凝土规范也明确规定:有些结构在所处的不同条件下,允许存在一定宽度的裂缝。但在施工中应尽量采取有效措施控制裂缝产生,使结构尽可能不出现裂缝或尽量减少裂缝的数量和宽度,尤其要尽量避免有害裂缝的出现,从而确保工程质量。 混凝土裂缝产生的原因很多,有变形引起的裂缝:如温度变化、收缩、膨胀、不均匀沉陷等原因引起的裂缝;有外载作用引起的裂缝;有养护环境不当和化学作用引起的裂缝等等。在实际工程中要区别对待,根据实际情况解决问题。 混凝土工程中常见裂缝及预防: 1.干缩裂缝及预防 干缩裂缝多出现在混凝土养护结束后的一段时间或是混凝土浇筑完毕后的一周左右。水泥浆中水分的蒸发会产生干缩,且这种收缩是不可逆的。干缩裂缝的产生主要是由于混凝土内外水分蒸发程度不同而导致变形不同的结果:混凝土受外部条件的影响,表面水分损失过快,变形较大,内部湿度变化较小变形较小,较大的表面干缩变形受到混凝土内部约束,产生较大拉应力而产生裂缝。相对湿度越低,水泥浆体干缩越大,干缩裂缝越易产 1原文出处及作者:《加拿大土木工程学报》

土木工程毕业设计外文翻译最终中英文

7 Rigid-Frame Structures A rigid-frame high-rise structure typically comprises parallel or orthogonally arranged bents consisting of columns and girders with moment resistant joints. Resistance to horizontal loading is provided by the bending resistance of the columns, girders, and joints. The continuity of the frame also contributes to resisting gravity loading, by reducing the moments in the girders. The advantages of a rigid frame are the simplicity and convenience of its rectangular form.Its unobstructed arrangement, clear of bracing members and structural walls, allows freedom internally for the layout and externally for the fenestration. Rig id frames are considered economical for buildings of up to' about 25 stories, above which their drift resistance is costly to control. If, however, a rigid frame is combined with shear walls or cores, the resulting structure is very much stiffer so that its height potential may extend up to 50 stories or more. A flat plate structure is very similar to a rigid frame, but with slabs replacing the girders As with a rigid frame, horizontal and vertical loadings are resisted in a flat plate structure by the flexural continuity between the vertical and horizontal components. As highly redundant structures, rigid frames are designed initially on the basis of approximate analyses, after which more rigorous analyses and checks can be made. The procedure may typically inc lude the following stages: 1. Estimation of gravity load forces in girders and columns by approximate method. 2. Preliminary estimate of member sizes based on gravity load forces with arbitrary increase in sizes to allow for horizontal loading. 3. Approximate allocation of horizontal loading to bents and preliminary analysis of member forces in bents. 4. Check on drift and adjustment of member sizes if necessary. 5. Check on strength of members for worst combination of gravity and horizontal loading, and adjustment of member sizes if necessary. 6. Computer analysis of total structure for more accurate check on member strengths and drift, with further adjustment of sizes where required. This stage may include the second-order P-Delta effects of gravity loading on the member forces and drift.. 7. Detailed design of members and connections.

土木工程外文翻译5

PROJECTCOSTCONTROL INTRODUCTION project a corporate image window and effectiveness of the source. With increasingly fierce market competition, the quality of work and the construction of civilizations rising material prices fluctuations. uncertainties and other factors, make the project operational in a relatively tough environment. So the cost of control is through the building of the project since the bidding phase of acceptance until the completion of the entire process, It is a comprehensive enterprise cost management an important part, we must organize and control measures in height to the attention with a view to improving the economic efficiency of enterprises to achieve the purpose. 2, outlining the construction project cost control, the cost of the project refers to the cost and process of formation occurred, on the production and operation of the amount of human resources, material resources and expenses, guidance, supervision, regulation and restrictions, in a timely manner to prevent, detect and correct errors in order to control costs in all project costs within the intended target. to guarantee the production and operation of enterprises benefits. 4, the construction cost control measures cost control measures. Reduce the cost of construction projects means, we should not only increase revenue is also reducing expenditure, or both also increase savings. Cutting expenditure is not only revenue, or revenue not only to cut expenditure, it is impossible to achieve the aim of reducing costs, at least there is no ideal lower cost effective.

土木工程毕业设计中英文翻译

附录:中英文翻译 英文部分: LOADS Loads that act on structures are usually classified as dead loads or live loads are fixed in location and constant in magnitude throughout the life of the the self-weight of a structure is the most important part of the structure and the unit weight of the density varies from about 90 to 120 pcf (14 to 19 KN/m)for lightweight concrete,and is about 145 pcf (23 KN/m)for normal calculating the dead load of structural concrete,usually a 5 pcf (1 KN/m)increment is included with the weight of the concrete to account for the presence of the reinforcement. Live loads are loads such as occupancy,snow,wind,or traffic loads,or seismic may be either fully or partially in place,or not present at may also change in location. Althought it is the responsibility of the engineer to calculate dead loads,live loads are usually specified by local,regional,or national codes and sources are the publications of the American National Standards Institute,the American Association of State Highway and Transportation Officials and,for wind loads,the recommendations of the ASCE Task Committee on Wind Forces. Specified live the loads usually include some allowance for overload,and may include measures such as posting of maximum loads will not be is oftern important to distinguish between the

土木工程岩土类毕业设计外文翻译

学号: 10447425 X X 大学 毕业设计(论文)外文翻译 (2014届) 外文题目 Developments in excavation bracing systems 译文题目开挖工程支撑体系的发展 外文出处 Tunnelling and Underground Space Technology 31 (2012) 107–116 学生 XXX 学院 XXXX 专业班级 XXXXX 校内指导教师 XXX 专业技术职务 XXXXX 校外指导老师专业技术职务 二○一三年十二月

开挖工程支撑体系的发展 1.引言 几乎所有土木工程建设项目(如建筑物,道路,隧道,桥梁,污水处理厂,管道,下水道)都涉及泥土挖掘的一些工程量。往往由于由相邻的结构,特性线,或使用权空间的限制,必须要一个土地固定系统,以允许土壤被挖掘到所需的深度。历史上,许多挖掘支撑系统已经开发出来。其中,现在比较常见的几种方法是:板桩,钻孔桩墙,泥浆墙。 土地固定系统的选择是由技术性能要求和施工可行性(例如手段,方法)决定的,包括执行的可靠性,而成本考虑了这些之后,其他问题也得到解决。通常环境后果(用于处理废泥浆和钻井液如监管要求)也非常被关注(邱阳、1998)。 土地固定系统通常是建设项目的较大的一个组成部分。如果不能按时完成项目,将极大地影响总成本。通常首先建造支撑,在许多情况下,临时支撑系统是用于支持在挖掘以允许进行不断施工,直到永久系统被构造。临时系统可以被去除或留在原处。 打桩时,因撞击或振动它们可能会被赶入到位。在一般情况下,振动是最昂贵的方法,但只适合于松散颗粒材料,土壤中具有较高电阻(例如,通过鹅卵石)的不能使用。采用打入桩系统通常是中间的成本和适合于软沉积物(包括粘性和非粘性),只要该矿床是免费的鹅卵石或更大的岩石。 通常,垂直元素(例如桩)的前安装挖掘工程和水平元件(如内部支撑或绑回)被安装为挖掘工程的进行下去,从而限制了跨距长度,以便减少在垂直开发弯矩元素。在填充情况下,桩可先设置,从在斜坡的底部其嵌入悬挑起来,安装作为填充进步水平元素(如搭背或土钉)。如果滞后是用来保持垂直元素之间的土壤中,它被安装为挖掘工程的进行下去,或之前以填补位置。 吉尔- 马丁等人(2010)提供了一个数值计算程序,以获取圆形桩承受轴向载荷和统一标志(如悬臂桩)的单轴弯矩的最佳纵筋。他们开发的两种优化流程:用一个或两个直径为纵向钢筋。优化增强模式允许大量减少的设计要求钢筋的用量,这些减少纵向钢筋可达到50%相对传统的,均匀分布的加固方案。 加固桩集中纵向钢筋最佳的位置在受拉区。除了节约钢筋,所述非对称加强钢筋图案提高抗弯刚度,通过增加转动惯量的转化部分的时刻。这种增加的刚性可能会在一段时间内增加的变形与蠕变相关的费用。评估相对于传统的非对称加强桩的优点,对称,钢筋桩被服务的条件下全面测试来完成的,这种试验是为了验证结构的可行性和取得的变形的原位测量。 基于现场试验中,用于优化的加强图案的优点浇铸钻出孔(CIDH)在巴塞罗那的几个非对称加强桩的施工过程中观察到混凝土桩沿与测得的变形的结果在常规和描述优化桩。实验证据表明,非对称地增强桩变形比观察到在常规增强那些小。两桩类型(对称和非对称)具有相同的直径,并设计为抵抗基于极限强度设计相同的弯曲力矩;离散杆的尺寸和使用的条全数字的,导致类似的名义抗弯强度。

相关主题