英文原文翻译

青少年教育

Y：您觉得中西方的家庭教育在塑造和培养青少年思想与性格方面有什么共同点吗？

H：在这方面，家长的引导是第一要素。中西方都很重视家庭生活质量对青少年性格培养的影响。通常情况下，父母都是孩子的第一位老师。小孩子经常模仿父母的言行并且很倾向于通过模仿父母的一些积极行为而获得奖励。

D:我同意何教授的观点。无论是在西方还是东方，孩子看起来都是一个家庭的中心并且越来越变成父母希望和梦想的焦点。同时，中西方的父母都在给小孩子施加压力。尤其是在中国，这种压力越来越明显。而美国，在这方面有时稍稍有一点多。但是，中西方都认为孩子会影响下一代甚至把对孩子的教育看做是有关整个家庭发展的基础。

Y:何教授，您曾说另一个中西方教育的主要不同点是亚洲的学校教育通常更偏向于应试教育。一个学生的未来可能被高考结果而被决定了。所以，您是对当前的大学教育的入学途径表示质疑吗？

H:是的。我理解在像中国这样的教育大国的环境下进行全民教育考试改革是一件和困难的事情，但我认为或许我们可以向美国学习，尤其是可以借鉴他们的学习能力倾向测验系统，可以为孩子们提供更多参与考试的机会。

Y:那在美国有多少种这样的测试或者说其他可以进入大学的机会呢？

D:我们有两种进入大学的测验考试：学习能力倾向测验和美国大学测验。但是我们强调这些测验都是非强制性的。他们不是有美国的学校所要求的，事实上，大多数的公立学校并不要求你在美国生活。所以，当你在高中生活的最后一年，你所要考虑的不是你想要进入哪所大学或者说通过哪种考试能让你进入大学，你所要考虑的是“你想进入大学吗？”这样就可以帮助孩子减轻不少压力然后有更多的空间去成长为一个学习者，让他们自己去了解到考试很重要但是考试并不能决定你是或者你是怎样的一个学生。我认为这是中美两国在教育方面的最大不同点。

Y:亚洲学生通常在数学和科学学科上能过的高分。您对此有什么看法吗？

H:这让我想起一个电视节目，这是一个有美国全国广播公司在1996年做的一个关于亚洲学生在美国大学的特别报道。在引用了一些说明在美国大学的亚洲学生的例子后，节目主持人总结说:“最近在美国的顶尖高等学府流行一句话，如果你在新学期的第一天看见这个班有很多亚洲面孔，别上这个班。”我想在某种程度上来说，这说明了亚洲学生在美国的课程上的表现很优秀。但与此同时，我们不得不承认，这些优秀的亚洲学生并不能在实验室里表现的有多优秀。我想这一部分说明这是过多强调考试结果而忽视实际动手能力的结果。所以我认为如果我们开始重视实际操作能力的重要性，我们可能会工作的更好而不是仅仅在考试方面做得好而已。

D:问题就在于学生们不知道如何将书本知识运用到实际中去，我并不需要那样的人。这样的学生将成为一个学者，知道很多，却不会做任何事情。我坦诚点说，我们表扬亚洲学生，但事实上他们没有做到最好过。如果给他们一项任务额，他们常常成为最好的助手，最好的研究者，但他们绝对不会成为领队或者项目经理。他们通常是工作者，我想这反映了应试教育系统的一种考试记忆。他们知道如何去记忆和学习它们，但是他们不知道如何通过他们自己去创造。这就是这种教育系统里面需要被仔细关注的地方。

Y:现在越来越多的中国父母把他们的孩子送到国外去上中学。您认为这些孩子能够较为容易的去体验西方的生活和教育吗？或者说这仅仅是出于一种实际的考虑？

H:这种现象背后的原因有很多。一些家长考虑到目前进入中国高等教育的机会依然需要激烈的竞争。另一些家长则可能考虑到出国能够帮助孩子在将来获得一份更好的工作机会。还有一些家长可能把送孩子送到国外念书看作是他们自己移民区国外的第一步。

Y:但是我们如何看待许多的亚洲籍博士学生在街上漫步寻找工作这一现象呢？D:嗯，有些博士仅仅告诉你说他们已经学习过了。如果我想成为一名大学教授或者以为科学研究者，博士很明显是非常重要的，因为我需要进入研究领域的尖端。但是如果我是某个公司的经理，我需要雇佣的是富有创造力的员工，那么我需要观察的是你做了什么而不是关心你学习到什么。

Y：现在有一个问题需要你们两位来共同解答然后结束我们此次的访问。作为家长和老师我们应该怎样做才能让我们的孩子更加富有创造力和革新能力。

D:我会鼓励孩子们学会质疑并且一直支持他们。我们应该花费更多的时间在引导孩子们对周围的世界有所质疑并产生兴趣，从而自己发现真理。所以，在这个时候我们应该是一个聆听着，而在同时，我们也是引导他们发现并解决问题的引领者。

H:我认为我们在初级和中级教育中都应该有更多的讨论课程。班级活动上的讨论将促进孩子们更多的进行创造性思维。这样他们将从教师指导下的追随者变成真正的思考者。

关注校园欺骗行为

詹姆斯泰勒对发生在亚利桑那州大学历史课堂上猖狂的欺骗行为感到震惊。

综合英语(一)课文及翻译

Lesson One: The Time Message Elwood N, Chapman 新的学习任务开始之际，千头万绪，最重要的是安排好时间，做时间的主人。本文作者提出了7点具体建议，或许对你有所启迪。 1 Time is tricky. It is difficult to control and easy to waste. When you look a head, you think you have more time than you need. For Example,at the beginning of a semester, you may feel that you have plenty of time on your hands, but toward the end of the term you may suddenly find that time is running out. You don't have enough time to cover all your duties (duty), so you get worried. What is the answer? Control! 译：时间真是不好对付，既难以控制好，又很容易浪费掉，当你向前看时，你觉得你的时间用不完。例如，在一个学期的开始，你或许觉得你有许多时间，但到学期快要结束时，你会突然发现时间快用光了，你甚至找不出时间把所有你必须干的事情干完，这样你就紧张了。答案是什么呢？控制。 2 Time is dangerous. If you don't control it, it will control you. I f you don't make it work fo r you, it will work against you. So you must become the master of time, not its servant. As a first-year college student, time management will be your number one Problem. 译：时间是危险的，如果你控制不了时间，时间就会控制你，如果你不能让时间为你服务，它就会起反作用。所以，你必须成为时间的主人，而不是它的奴仆，作为刚入学的大学生，妥善安排时间是你的头等大事。 3 Time is valuable. Wasting time is a bad habit. It is like a drug. The more time you waste,the easier it is to go on wasting time. If seriously wish to get the most out of college, you must put the time message into practice. 译：时间是珍贵的，浪费时间是个坏习惯，这就像毒品一样，你越浪费时间，就越容易继续浪费下去，如果你真的想充分利用上大学的机会，你就应该把利用时间的要旨付诸实践。 Message1. Control time from the beginning. 4 Time is today, not tomorrow or next week. Start your plan at the Beginning of the term. 译：抓紧时间就是抓紧当前的时间，不要把事情推到明天或是下周，在学期开始就开始计划。 Message2. Get the notebook habit. 5 Go and buy a notebook today, Use it to plan your study time each day. Once a weekly study plan is prepared, follow the same pattern every week with small changes. Sunday is a good day to make the Plan for the following week.

英语原文及其翻译

Exploring Filipino School Counselors’ Beliefs about Learning Allan B. I. Bernardo [Abstract] School reform efforts that focus on student learning require school counselors to take on important new roles as advocates of student learning and achievement.But how do school counselors understand the process of learning? In this study, we explore the learning beliefs of 115 Filipino school counselors who indicated their degree of agreementwith 42 statements about the process of learning and the factors thatinfluence this process.A principal components analysis of the responses to the 42 statements suggested three factors:(F1)social-cognitive constructivist beliefs, (F2) teacher-curriculum-centered behaviorist beliefs,and (F3) individual difference factors.The preliminary results are briefly discussed in terms of issues related to how Filipino school counselors’ conceptions of learning may guide their strategies for promoting student learning and achievement. [Key words]beliefs about learning, conceptions of learning, school counselors, student learning, Philippines School reform efforts in different parts of the world have focusedon students’learning. In particular,most school improvement programsnow aim to ensure that students acquire the high-level knowledge and skills that help them to thrive in today’s highly competitive globaleconomy (e.g., Lee & Williams, 2006). I n this regard, school reform programs draw from various contemporary theories and research on learning (e.g.,Bransford,Brown, & Cocking, 1999; Lambert & McCombs, 1998).The basic idea is that all school improvement efforts should be directed at ensuring students achieve high levels of learning or attainment of well-defined curricular objectives and standards.For example, textbooks (Chien & Young, 2007), computers and educational technology (Gravoso, 2002; Haertnel & Means, 2003;Technology in Schools Task Force, 2003), and educational assessment systems (Black & Wiliam2004; Cheung & Ng, 2007; Clark, 2001; Stiggins, 2005) are being reconsidered as regards how they can effectively provide scaffolds and resources for advancing student learning. Likewise,the allocation and management of a school’s financial resources are assessed in terms ofwhether these are effectively mobilized and utilized towards improving student learning (Bolam, 2006; Chung & Hung, 2006; Retna, 2007). In this regard, some advocates have also called for an examination of the role of school counselors in these reform efforts (Herr, 2002). Inthe United States, House and Hayes (2002) challenged school counselors to take proactive leadership roles in advocating for the success of all

文献翻译英文原文

https://www.sodocs.net/doc/427282496.html,/finance/company/consumer.html Consumer finance company The consumer finance division of the SG group of France has become highly active within India. They plan to offer finance for vehicles and two-wheelers to consumers, aiming to provide close to Rs. 400 billion in India in the next few years of its operations. The SG group is also dealing in stock broking, asset management, investment banking, private banking, information technology and business processing. SG group has ventured into the rapidly growing consumer credit market in India, and have plans to construct a headquarters at Kolkata. The AIG Group has been approved by the RBI to set up a non-banking finance company (NBFC). AIG seeks to introduce its consumer finance and asset management businesses in India. AIG Capital India plans to emphasize credit cards, mortgage financing, consumer durable financing and personal loans. Leading Indian and international concerns like the HSBC, Deutsche Bank, Goldman Sachs, Barclays and HDFC Bank are also waiting to be approved by the Reserve Bank of India to initiate similar operations. AIG is presently involved in insurance and financial services in more than one hundred countries. The affiliates of the AIG Group also provide retirement and asset management services all over the world. Many international companies have been looking at NBFC business because of the growing consumer finance market. Unlike foreign banks, there are no strictures on branch openings for the NBFCs. GE Consumer Finance is a section of General Electric. It is responsible for looking after the retail finance operations. GE Consumer Finance also governs the GE Capital Asia. Outside the United States, GE Consumer Finance performs its operations under the GE Money brand. GE Consumer Finance currently offers financial services in more than fifty countries. The company deals in credit cards, personal finance, mortgages and automobile solutions. It has a client base of more than 118 million customers throughout the world

英文翻译(原文)

GRA VITY RETAINING?WALL 1. INTRODUCTION Retaining walls are structures used to provide stability for earth or other material where conditions disallow the mass to assume its natural slope, and are commonly used to hold back or support soilbanks,coal or ore piles, and water. Retaining walls are classified, based on the method of achieving stability, into six principal types (Fig.1). The gravity-wall depends upon its weight, as the name implies, for stability. The cantilever wall is a reinforced-concrete wall that utilizes cantilever action to retain the mass behind the wall from assuming a natural slope. Stability of this wall is partially achieved from the weight of soil on the heel portion of the base slab. A counterfort retaining wall is similar to a cantilever retaining wall, except that it is used where the cantilever is long or for very high pressures behind wall and has counterforts, which tie the wall and base together, built at intervals along the wall to reduce the bending moments and sheers. As indicated in Fig.1c, the counterfort is behind the wall and subjected to tensile forces. A buttressed retaining wall is similar to a counterfort wall, except that the bracing is in front of the wall and is in compression instead of tension. Two other types of walls not considered further are crib walls, which are built-up members of pieces of precast concrete, metal, or timber and are supported by anchor pieces embedded in the soil for stability, and semigravity walls, which are walls intermediate between a true gravity and a cantilever wall. (a)(b)(e)

英语原文及翻译

高速视频处理系统中的信号完整性分析 摘要：结合高速DSP图像处理系统讨论了高速数字电路中的信号完整性问题，分析了系统中信号反射、串扰、地弹等现象破坏信号完整性的原因，通过先进IS工具的辅助设计，找出了确保系统信号完整性的具体方法。 关键词：高速电路设计信号完整性 DSP系统 深亚微米工艺在IC设计中的使用使得芯片的集成规模更大、体积越来越小、引脚数越来越多；由于近年来IC工艺的发展，使得其速度越来越高。从而，使得信号完整性问题引起电子设计者广泛关注。 在视频处理系统中，多维并行输入输出信号的频率一般都在百兆赫兹以上，而且对时序的要求也非常严格。本文以DSP图像处理系统为背景，对信号完整性进行准确的理论分析，对信号完整性涉及的典型问题[1]——不确定状态、传输线效应、反射、串扰、地弹等进行深入研究，并且从实际系统入手，利用IS仿真软件寻找有效的途径，解决系统的信号完整性问题。 1 系统简介 为了提高算法效率，实时处理图像信息，本图像处理系统是基于DSP+FPGA结构设计的。系统由SAA7111A视频解码器、TI公司的TMS320C6701 DSP、Altera公司的EPlK50QC208 FPGA、PCI9054 PCI接口控制器以及SBRAM、SDRAM、FIFO、FLASH等构成。FPGA是整个系统的时序控制中心和数据交换的桥梁，而且能够对图像数据实现快速底层处理。DSP是整个系统实时处理高级算法的核心器件。系统结构框图如图1所示。 在整个系统中，PCB电路板的面积仅为15cm×l5cm，系统时钟频率高达167MHz，时钟沿时间为0．6ns。由于系统具有快斜率瞬变和极高的工作频率以及很大的电路密度，使得如何处理高速信号问题成为一个制约设计成功的关键因素。 2 系统中信号完整性问题及解决方案 2．1 信号完整性问题产生机理 信号的完整性是指信号通过物理电路传输后，信号接收端看到的波形与信号发送端发送的波形在容许的误差范围内保持一致，并且空间邻近的传输信号间的相互影响也在容许的范围之内。因此，信号完整性分析的主要目标是保证高速数字信号可靠的传输。实际信号总是存在电压的波动，如图2所示。在A、B两点由于过冲和振铃[2]的存在使信号振幅落入阴影部分的不确定区，可能会导致错误的逻辑电平发生。总线信号传输的情况更加复杂，任何一个信号发生相位上的超前或滞后都可能使总线上数据出错，如图3所示。图中，CLK为时钟信号，D0、D1、D2、D3是数据总线上的信号，系统允许信号最大的建立时间[1]为△t。在正常情况下，D0、D1、D2、D3信号建立时间△t1<△t，在△t时刻之后数据总线的数据已稳定，系统可以从总线上采样到正确的数据，如图3(a)所示。相反，当信号D1、D2、D3受过冲和振铃等信号完整问题干扰时，总线信号就发生

科普版英语六年级下册课文及翻译 (直接打印版)

Lesson 1 I’m not feeling well. Let’s talk （M=Mom, T= Tom） M: What,'s the matter, Tom T: I'm not feeling well, Mom M: Do you have a cold T: Yes, I think so. Could you give me some water, please M: Here you are. T: Thank you, Mom. M: Tom, you must go and see a doctor. T: OK, Mom. M: It's cold outside. You must wear your coat. T: OK, Mom. Could you pass me my coat,please M: Here you are. T: Thank you, Mom M: Tell me your teacher's number. I'll call him and tell him you are sick. T: OK. Here it is. 译文 (M=妈妈,T=汤姆) 妈妈:怎么了,汤姆 汤姆:我感觉不舒服,妈妈。 妈妈:你感冒了吗 汤姆:是的,我想是这样的。您能给我一些水吗 妈妈:给你。 汤姆:谢谢您,妈妈。 妈妈:汤姆,你必须去看医生. 汤姆:好的,妈妈。 妈妈:外面很冷。你必须穿你的外套。 汤姆:好的,妈妈。您能把我的外套递给我吗 妈妈:给你。 汤姆:谢谢您,妈妈。 妈妈:告诉我你老师的电话号码。我将给他打电话告诉他你生病了。

英语翻译专业必翻经典文章英文原文参考译文

文档简介 一，英语翻译经典文章之英文原稿二，中文翻译：这篇英语文章的最好翻译版本！不是俺说的，是俺老师说哒！！ 英文原稿Brian It seems my only request (“please, let me sleep”) is not clear enough, so I made this simple table that can help you when you’re in doubt. Especially during the night

中文翻译小子： 我只想好好地睡觉，你不明白吗？！所以，我做了这个简表。当你不知道怎么办时，特 别是在晚上的时候，你可以看看它。 具体情况行动指南 1，我正在睡觉禁止进入 2，你不确定我是否睡觉，你想搞清楚管你“鸟”事；禁止进入 3，你嗑了药，想奔向我的床你他妈的滚远点 4，你在youtube上看了一个超赞的视频，禁止进入；在脸书上把链接发给我想让我看看 5，就算第三次世界大战开始了管我屁事，他妈的别进来 6，你和你的基友们想和我“玩玩”抱歉，直男一枚。不要碰我的任何东西，门都别碰 7，你想整理我的房间我谢谢你了！我自己会打扫 8，普京宣布同性婚姻合法化终于等到“它”！还好你没放弃！还是不要来我房里！ 9，我不在家进我房间，想都别想 10，白天，我在家。你敲了门，我说“请进” 你可以进来了 福利放送！！

如果你已经看到了这里，那么说明你应该是英文爱好者哦。 下面有一些非常实用，我精心整理的英文资料，你一定用得到！快去看看吧！ 一，最常用英语翻译政治文体句型总结大全完美版 二，英文合同翻译最常用句型总结专业版 三，英语毕业论文提纲模板优秀完整详细无敌版

英文翻译原文

南京师范大学泰州学院 英文翻译原文 年级： 2011级学号：12110330 姓名：申佳佳 系部：信息工程学院 专业：通信工程 题目：基于C51的数字测速仪设计与仿真 指导教师：焦蓬蓬 2015 年 4 月 5 日

Linux - Operating system of cybertimes Though for a lot of people , regard Linux as the main operating system to make u p huge work station group, finish special effects of " Titanic " make , already can be re garded as and show talent fully. But for Linux, this only numerous news one of. Rece ntly, the manufacturers concerned have announced that support the news of Linux to i ncrease day by day, users' enthusiasm to Linux runs high unprecedentedly too. Then, Linux only have operating system not free more than on earth on 7 year this piece wh at glamour, get the favors of such numerous important software and hardware manufa cturers as the masses of users and Orac le , Informix , HP , Sybase , Corel , Intel , Net scape , Dell ,etc. , OK? 1.The background of Linux and characteristic Linux is a kind of " free (Free ) software ": What is called free, mean users can o btain the procedure and source code freely , and can use them freely , including revise or copy etc.. It is a result of cybertimes, numerous technical staff finish its research a nd development together through Inte rnet, countless user is it test and except fault , c an add user expansion function that oneself make conveniently to participate in. As th e most outstanding one in free software, Linux has characteristic o f the following: (1)Totally follow POSLX standard, expand the network operating system of sup porting all AT&T and BSD Unix characteristic. Because of inheritting Unix outstandi ng design philosophy , and there are clean , stalwart , high-efficient and steady kernels , their all key codes are finished by Li nus Torvalds and other outstanding programmer s, without any Unix code of AT&T or Berkeley, so Linu x is not Unix, but Linux and Unix are totally compatible. (2)Real many tasks, multi-user's system, the built-in n etwork supports, can be with such seamless links as NetWare , Windows NT , OS/2 , Unix ,etc.. Network in various kinds of Unix it tests to be fastest in comparing and ass ess efficiency. Support such many kinds of files systems as FAT16 , FAT32 , NTFS , E x t2FS , ISO9600 ,etc. at the same time .

专业英语原文和翻译

Basic Control Actions and Industrial Automatic Control An automatic controller compares the actual value of the plant output with the desired value, determines the deviation, and produces a control signal which will reduce the deviation to zero or to a small value.The manner in which the automatic conroller produces the control signal is called the control action. Classifications of industrial automatic controllers Induetrial automatic controllers may be classified according to their control action as: ·two-position or on-off controllers; ·proportional controllers; ·integral controllers; ·proportional-plus-integral controllers; ·proportional-plus-derivative controllers; ·proportional-plus-derivative-plus-integral controllers. Most industrial automatic controllers use eletricity or pressurized fluid such as oil or air as power sources. Automatic controllers may also be classified according to the kind of power employed in the operation, such as pneumatic controllers, hydraulic controllers, or electronic controllers.What kind of controller to use must be decided by the nature of the plant and the operating conditions,including such considerations as safety, availability, reliability, accuracy, weight, and size? Elements of industrial automatic controllers An automatic controller must detect the actuating error signal, which is usually at a very low power level, and amplify it to a sufficiently high level. Thus, an amplifier is necessary. The output of an automatic controller is fed to a power device, such as a pneumatic motor or valve, a hydraulic motor, or an electric motor. The controller usually consists of an error detector and amplifier. The measuring element is a device that converts the output variable into another suitable variable, such as a displacement, pressure, or electric signal, which can be used for comparing the output to the reference input signal. This element is in the feedback path of the closed-loop system. The set point of the controller must be converted to a reference input of the same units as the feedback signal from the measuring element. The amplifier amplifies the power of the actuating error signal, which in turn operates the actuator. The actuator is an element which alters the input to the plant according to the control signal so that the feedback signal may be brought into correspondence with the reference input signal. Self-operated controllers In most industrial automatic controllers, separate units are used for the measuring element and for the actuator. In a very simple one, however, such as a self-operated controller, these elements are assembled in one unit. Self-operated controllers utilize power developed by the measuring element and are very simple and inexpensive. The set point is determined by the adjustment of the spring force. The controlled pressure is measured by the diaphragm. The actuating error signal is the net force acting on the diaphragm. Its position determines the valve opening. The operation of self-operated controller is as follows: Suppose that the output pressure is lower than the reference pressure, as determined by the set point. Then the downward spring force is greater than the upward pressure force, resulting in a downward movement of the diaphragm. This increases the flow rate and raises the output pressure.

英文翻译原文

Engineering with Computers(2002)18:109–115 Ownership and Copyright ?2002Springer-Verlag London Limited Structural Optimization of Automotive Body Components Based on Parametric Solid Modeling M.E.Botkin GM R&D Center,Warren,MI,USA Abstract Abstract::Parametric modeling was used to build several models of an automotive front structure concept that utilizes carbon fiber composite materials and the corresponding molding processes.An ultra-lightweight aluminum body front structure was redesigned to include an all-composite front structure.Two alternative concepts were studied which represent the structure as a bonded assembly of shells.Closed sections result from two pieces–an inner and outer.Parametric modeling was found to be a useful tool for building and modifying models to use in optimization concept studies. Such models can be built quickly and both the sketch dimensions and location dimensions are particularly useful for making the adjustments necessary to fit the various body pieces together.The parametric models then must be joined together as one geometric solid model in order to obtain a surface mesh.Structural optimization input data can then be seamlessly and quickly created from the parametric-modelbased finite element model to begin the tradeoff studies.This integrated process in which parametric modeling was coupled with structural optimization was used to carry out design studies on the lightweight body front structure.Several carbon fiber material combinations were studied to determine mass reduction potential of certain types of carbon fiber products considered to be lower cost than typical carbon fiber materials used in the past.Structural optimization was used to compare several composite constructions for the design of the bonded front structure.Eight cases were studied using various materials and composite lay-ups.Mass savings estimates from45–64%over steel were obtained.The most reasonable design consisted of a combination of relatively low cost chopped carbon fiber and woven carbon fiber and using a20mm balsa core in the top of the shock tower area. This design had a maximum thickness of7mm and a mass reduction over steel of approximately62%.Correspondence and offprint requests to:Mark E.Botkin,Principal