图纸技术要求
general notes:
2.part must be free of flash, burrs and sharp edges that adversely effect product quality, function, fit or safe handling
产品必须是没有毛边,毛刺和锐利的边缘,严重影响产品质量,功能,健康或安全的处理
3. all dimensions applicable after graining
所有的尺寸成型后适用.
4. parting line and die draw defined in math dada can not be altered without chrysler written permission.
4。分型线和模具图明确在数据里就不能改变在没有克莱斯勒书面许可下。
5.gate location must be approved by chrysler engineering and placed on nonvisible surfaces.
5。进胶点的位置必须经批准克莱斯勒工程批准和放在看不到表面。
6.No sink mark,flow lines or other visual imperfections to be on visible surfaces.
6。没有缩痕、流痕或其他视觉可见的表面缺陷。
7.Tolerance on material thickness is to be +-5% of thickness defined in math model
7。在材料厚度公差是+ -5%的数学模型中定义的厚度
reference chrysler standard cep12679 for s and h definition and requirements
参考标准克莱斯勒cep12679 s和h的定义和要求
Tue, 25 Mar 2014
-------------------------------------------------------------------------------------
PART INFORMATION PAGE
-------------------------------------------------------------------------------------
TITLE BLOCK INFORMATION
-------------------------------------------------------------------------------------
Item Number :FC00AAN04467
Item Revision :003
PCL :
Item Name :SHIELD SEAT MTG 2ND ROW FRT LT
Item Description :FC00AAN04467
Chrysler Part Number :1XM97TRMAD
Fiat Codep Number :53284642
Status :FA_STEP5,CAD_Precid
Owner :Sweeney, Carol (t6762cs)
-------------------------------------------------------------------------------------
ENGINEERING STANDARDS APPLIED
-------------------------------------------------------------------------------------
Item Standard No. Suffix Standard Title
1 AS-10119 <A> GENERAL REQUIREMENTS FOR DESIGNATED APPEARANCE ITEMS
一般要求对指定的外观项目
2 CPM-359MGD SEE CPM-INDEX IN ADRESS FOR DETAILS
cpm - 359 mgd看到CPM-INDEX地址的细节
3 CPN-3560 SEE CPN-INDEX IN ADRESS FOR DETAILS 3 cpn - 3560看到CPN-INDEX详情地址
4 CS-11000 A CHRYSLER GROUP LLC TRADEMARK IDENTIFICATION ON PARTS
克莱斯勒(CHRYSLER GROUP LLC)商标识别在产品上.
5 CS-8891 MAXIMUM ALLOWABLE CONDITION FOR PARTING LINE FLASH A
ND DIE MISMATCH FOR PLASTIC INJECTION MOLDED PARTS
5 cs - 8891分型线毛边和对塑料注塑模具产品模具错位最大允许条件
6 CS-9001 INSPECTION TEST CHARACTERISTICS REQUIRING SPECIAL QU
ALITY CONTROL SURVEILLANCE - FLAMMABILITY OF INTERIO
R PARTS (SUPERSEDED BY MS-JP-9-4)
检验测试特点要求特殊质量控制监测——可燃性室内部分(由M
S-JP-9-4取代)
7 CS-9003 SUPPLIER REQUIREMENTS FOR VEHICLE AND SERVICE PARTS:
MATERIAL CONTENT REPORTING, MARKING, AND RECYCLABIL
ITY
供应商要求车辆和服务部分:材料内容报道,标记和再循环能力
8 CS-9022 COLOR AND GLOSS REQUIREMENTS FOR INTERIOR TRIM COMPO
NENTS
内饰部件颜色和光泽要求
9 CS-9800 GENERAL INFORMATION
一般信息
10 CS-9801 QUALITY REQUIREMENTS
质量要求
11 FC-12421 GEOMETRIC DIMENSIONING AND TOLERANCING PRACTICES (Jo
int Standard)
几何尺寸和公差实践(联合标准)
12 FMVSS302 FMVSS302 - AVAILABLE IN THE AUTOMOTIVE LEGISLATION O
NLINE (ALO) WEBSITE
联邦机动车安全标准302——可用在汽车立法在线(ALO)网站
FMVSS 302 Flammability of materials used in the occupant compartments of motor vehicles
FMVSS 302 交通工具车厢内饰材料的燃烧测试
13 LP-463DD-18-01 SCRATCH AND MAR RESISTANCE OF AUTOMOTIVE INTERIOR CO
ATINGS AND EXTERIOR PLASTICS USING 5-FINGER TESTER
划痕和3月汽车内部涂料和外部阻力塑料使用五指测试仪
14 LP-463KC-09-01 ODOR
气味
15 LP-463LB-12-01 RESISTANCE TO HUMIDITY HOT AND COLD CYCLING OF TRIM
MATERIALS TEST
耐湿度调整材料的冷热循环测试 （修剪材料对 耐湿冷热循环测试的抵抗）
16 LP-463PB-57-03 AUTOMOTIVE FLUIDS STAINING OF PLASTICS - DETERMINATI
ON OF
汽车塑料液体染色——测定
17 MS-DB-500 PLASTICS - THERMOPLASTIC - POLYPROPYLENE (PP) - ALL
AUTOMOTIVE GRADES.
塑料-热塑性聚丙烯(PP)——所有汽车的等级。
18 MS-JP-1-3 COLOR DURABILITY OF INTERIOR MATERIALS
室内材料的颜色耐久性
19 MS-JP-9-4<S> FLAMMABILITY TESTING OF INTERIOR MATERIALS
内饰材料的可燃性测试
20 PF-10254 SEAT COMPLETE ASSEMBLY PERFORMANCE STANDARD
座椅总成性能标准
21 PF-11203 MATERIAL DURABILITY REQUIREMENTS FOR INTERIOR PLASTI
C TRIM COMPONENTS
对内饰塑料部件材料耐久性要求
22 PF-12063 FRONT SEAT STRUCTURE PERFORMANCE STANDARD
前座结构性能标准
23 PF-8500 REQUIREMENTS FOR VERIFICATION, VALIDATION AND CONTIN
UING CONFORMANCE TESTING
要求验证,验证和持续的一致性测试
24 PF-HOMOLOGATION PRODUCT HOMOLOGATION
产品同系化反应
25 PF-SAFETY<S> PRODUCT SAFETY - USE OF SAFETY SHIELDS <S>
产品安全,使用安全保护<年代>
26 PS-10052 INFORMATION SECURITY
信息安全
27 PS-1285 PLASTIC PART - SURFACE FINISHES
塑料产品-表面加工
28 PS-4480 A IDENTIFICATION OF PARTS
产品识别
29 PS-4559<A> DISTRIBUTION OF MASTER SPECIMENS FOR DESIGNATED APPE
ARANCE ITEMS
主标本分布对指定的外观项目
30 PS-6013 GEOMETRIC DIMENSIONING AND TOLERANCING SYMBOLOGY MET
HOD, USAGE AND DEFINITIONS
几何尺寸和公差符号学方法,使用
和定义
31 PS-7300<D> PROD
UCT QUALITY - USE OF DIAMONDS <D>
产品质量——使用钻石< D >
32 PS-9065 REGRIND - REUSE OF MOLDING MATERIALS
粉料再生——成型材料的重用
33 PS-9227 CAD/CAM DATA EXCHANGE POLICY
CAD / CAM数据交换政策
-------------------------------------------------------------------------------------
SPECIAL CHARACTERISTICS
-------------------------------------------------------------------------------------
APPEARANCE :Y DIAMONDS :Y
EMISSIONS :N HOMOLOGATION :Y
SAFETY :Y TRACEABILITY :N
-------------------------------------------------------------------------------------
GENERAL ENGINEERING NOTES (optional)
-------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------