毕业设计(论文)外文文献翻译要求

毕业设计（论文）外文文献翻译要求

根据《普通高等学校本科毕业设计（论文）指导》的内容，特对外文文献翻译提出以下要求：一、翻译的外文文献的字符要求不少于1.5万（或翻译成中文后至少在3000字以上）。字数达到的文献一篇即可。

二、翻译的外文文献应主要选自学术期刊、学术会议的文章、有关著作及其他相关材料，应与毕业论文（设计）主题相关，并作为外文参考文献列入毕业论文（设计）的参考文献。并在每篇中文译文首页用“脚注”形式注明原文作者及出处，中文译文后应附外文原文。三、中文译文的基本撰写格式为题目采用小三号黑体字居中打印，正文采用宋体小四号字，行间距一般为1.25倍行距，标准字符间距。页边距为左2.5cm，右2.5cm，上3cm，下2cm,页眉距边界2cm,页脚距边界1cm。页眉为：“杭州电子科技大学本科毕业论文外文翻译”，字体为五号宋体，居中；页面统一采用A4纸。从正文开始编写页码，页码居中。

四、封面格式由学校统一制作（注：封面上的“翻译题目”指中文译文的题目），并按“封面、译文一、外文原文一、译文二、外文原文二”的顺序统一装订。如果只有一篇译文，则可以删除“翻译（2）题目”这一行。

五、封面格式请勿自行改动，学号请写完整。

理学院

2006年9月13日

概率论毕业论文外文翻译

Statistical hypothesis testing Adriana Albu，Loredana Ungureanu Politehnica University Timisoara,adrianaa@aut.utt.ro Politehnica University Timisoara,loredanau@aut.utt.ro Abstract In this article,we present a Bayesian statistical hypothesis testing inspection, testing theory and the process Mentioned hypothesis testing in the real world and the importance of, and successful test of the Notes. Key words Bayesian hypothesis testing; Bayesian inference;Test of significance Introduction A statistical hypothesis test is a method of making decisions using data, whether from a controlled experiment or an observational study (not controlled). In statistics, a result is called statistically significant if it is unlikely to have occurred by chance alone, according to a pre-determined threshold probability, the significance level. The phrase "test of significance" was coined by Ronald Fisher: "Critical tests of this kind may be called tests of significance, and when such tests are available we may discover whether a second sample is or is not significantly different from the first."[1] Hypothesis testing is sometimes called confirmatory data analysis, in contrast to exploratory data analysis. In frequency probability,these decisions are almost always made using null-hypothesis tests. These are tests that answer the question Assuming that the null hypothesis is true, what is the probability of observing a value for the test statistic that is at [] least as extreme as the value that was actually observed?) 2 More formally, they represent answers to the question, posed before undertaking an experiment,of what outcomes of the experiment would lead to rejection of the null hypothesis for a pre-specified probability of an incorrect rejection. One use of hypothesis testing is deciding whether experimental results contain enough information to cast doubt on conventional wisdom. Statistical hypothesis testing is a key technique of frequentist statistical inference. The Bayesian approach to hypothesis testing is to base rejection of the hypothesis on the posterior probability.[3][4]Other approaches to reaching a decision based on data are available via decision theory and optimal decisions. The critical region of a hypothesis test is the set of all outcomes which cause the null hypothesis to be rejected in favor of the alternative hypothesis. The critical region is usually denoted by the letter C. One-sample tests are appropriate when a sample is being compared to the population from a hypothesis. The population characteristics are known from theory or are calculated from the population.

毕业论文英文参考文献与译文

Inventory management Inventory Control On the so-called "inventory control", many people will interpret it as a "storage management", which is actually a big distortion. The traditional narrow view, mainly for warehouse inventory control of materials for inventory, data processing, storage, distribution, etc., through the implementation of anti-corrosion, temperature and humidity control means, to make the custody of the physical inventory to maintain optimum purposes. This is just a form of inventory control, or can be defined as the physical inventory control. How, then, from a broad perspective to understand inventory control? Inventory control should be related to the company's financial and operational objectives, in particular operating cash flow by optimizing the entire demand and supply chain management processes (DSCM), a reasonable set of ERP control strategy, and supported by appropriate information processing tools, tools to achieved in ensuring the timely delivery of the premise, as far as possible to reduce inventory levels, reducing inventory and obsolescence, the risk of devaluation. In this sense, the physical inventory control to achieve financial goals is just a means to control the entire inventory or just a necessary part; from the perspective of organizational functions, physical inventory control, warehouse management is mainly the responsibility of The broad inventory control is the demand and supply chain management, and the whole company's responsibility. Why until now many people's understanding of inventory control, limited physical inventory control? The following two reasons can not be ignored: First, our enterprises do not attach importance to inventory control. Especially those who benefit relatively good business, as long as there is money on the few people to consider the problem of inventory turnover. Inventory control is simply interpreted as warehouse management, unless the time to spend money, it may have been to see the inventory problem, and see the results are often very simple procurement to buy more, or did not do warehouse departments . Second, ERP misleading. Invoicing software is simple audacity to call it ERP, companies on their so-called ERP can reduce the number of inventory, inventory control, seems to rely on their small software can get. Even as SAP, BAAN ERP world, the field of

人力资源管理外文文献翻译

文献信息： 文献标题：Challenges and opportunities affecting the future of human resource management（影响人力资源管理未来的挑战和机遇） 国外作者：Dianna L. Stone，Diana L. Deadrick 文献出处：《Human Resource Management Review》, 2015, 25(2):139-145 字数统计：英文3725单词，21193字符；中文6933汉字 外文文献： Challenges and opportunities affecting the future of human resource management Abstract Today, the field of Human Resource Management (HR) is experiencing numerous pressures for change. Shifts in the economy, globalization, domestic diversity, and technology have created new demands for organizations, and propelled the field in some completely new directions. However, we believe that these challenges also create numerous opportunities for HR and organizations as a whole. Thus, the primary purposes of this article are to examine some of the challenges and opportunities that should influence the future of HR. We also consider implications for future research and practice in the field. Keywords: Future of human resource management, Globalization, Knowledge economy Diversity, Technology 1.Change from a manufacturing to a service or knowledge economy One of the major challenges influencing the future of HR processes is the change from a manufacturing to a service or knowledgebased economy. This new economy is characterized by a decline in manufacturing and a growth in service or knowledge as the core of the economic base. A service economy can be defined as a system based on buying and selling of services or providing something for others (Oxford

毕业论文外文翻译模版

吉林化工学院理学院 毕业论文外文翻译English Title（Times New Roman ，三号） 学生学号：08810219 学生姓名：袁庚文 专业班级：信息与计算科学0802 指导教师：赵瑛 职称副教授 起止日期：2012.2.27～2012.3.14 吉林化工学院 Jilin Institute of Chemical Technology

1 外文翻译的基本内容 应选择与本课题密切相关的外文文献（学术期刊网上的），译成中文，与原文装订在一起并独立成册。在毕业答辩前，同论文一起上交。译文字数不应少于3000个汉字。 2 书写规范 2.1 外文翻译的正文格式 正文版心设置为：上边距：3.5厘米，下边距：2.5厘米，左边距：3.5厘米，右边距：2厘米，页眉：2.5厘米，页脚：2厘米。 中文部分正文选用模板中的样式所定义的“正文”，每段落首行缩进2字；或者手动设置成每段落首行缩进2字，字体：宋体，字号：小四，行距：多倍行距1.3，间距：前段、后段均为0行。 这部分工作模板中已经自动设置为缺省值。 2.2标题格式 特别注意：各级标题的具体形式可参照外文原文确定。 1．第一级标题（如：第1章绪论）选用模板中的样式所定义的“标题1”，居左；或者手动设置成字体：黑体，居左，字号：三号，1.5倍行距，段后11磅，段前为11磅。 2．第二级标题（如：1.2 摘要与关键词）选用模板中的样式所定义的“标题2”，居左；或者手动设置成字体：黑体，居左，字号：四号，1.5倍行距，段后为0，段前0.5行。 3．第三级标题（如：1.2.1 摘要）选用模板中的样式所定义的“标题3”，居左；或者手动设置成字体：黑体，居左，字号：小四，1.5倍行距，段后为0，段前0.5行。 标题和后面文字之间空一格（半角）。 3 图表及公式等的格式说明 图表、公式、参考文献等的格式详见《吉林化工学院本科学生毕业设计说明书（论文）撰写规范及标准模版》中相关的说明。

五分钟搞定5000字-外文文献翻译【你想要的工具都在这里】-2

五分钟搞定5000字－外文文献翻译 工具大全 建议收藏 在科研过程中阅读翻译外文文献是一个非常重要的环节，许多领域高水平的文献都是外文文献，借鉴一些外文文献翻译的经验是非常必要的。由于特殊原因我翻译外文文献的机会比较多，慢慢地就发现了外文文献翻译过程中的三大利器：G oogle“翻译”频道、金山词霸（完整版本）和CNKI“翻译助手"。 具体操作过程如下： 1.先打开金山词霸自动取词功能，然后阅读文献； 2.遇到无法理解的长句时，可以交给Google处理，处理后的结果猛一看，不堪入目，可是经过大脑的再处理后句子的意思基本就明了了； 3.如果通过Google仍然无法理解，感觉就是不同，那肯定是对其中某个“常用单词”理解有误，因为某些单词看似很简单，但是在文献中有特殊的意思，这时就可以通过CNKI的“翻译助手”来查询相关单词的意思，由于CNKI的单词意思都是来源与大量的文献，所以它的吻合率很高。 另外，在翻译过程中最好以“段落”或者“长句”作为翻译的基本单位，这样才不会造成“只见树木，不见森林”的误导。 注： 1、Google翻译： google，众所周知，谷歌里面的英文文献和资料还算是比较详实的。我利用它是这样的。一方面可以用它查询英文论文，当然这方面的帖子很多，大家可以搜索，在此不赘述。回到我自己说的翻译上来。下面给大家举个例子来说明如何用

吧 比如说“电磁感应透明效应”这个词汇你不知道他怎么翻译， 首先你可以在CNKI里查中文的，根据它们的关键词中英文对照来做，一般比较准确。 在此主要是说在google里怎么知道这个翻译意思。大家应该都有词典吧，按中国人的办法，把一个一个词分着查出来，敲到google里，你的这种翻译一般不太准，当然你需要验证是否准确了，这下看着吧，把你的那支离破碎的翻译在g oogle里搜索，你能看到许多相关的文献或资料，大家都不是笨蛋，看看，也就能找到最精确的翻译了，纯西式的！我就是这么用的。 2、CNKI翻译： CNKI翻译助手，这个网站不需要介绍太多，可能有些人也知道的。主要说说它的有点，你进去看看就能发现：搜索的肯定是专业词汇，而且它翻译结果下面有文章与之对应（因为它是CNKI检索提供的，它的翻译是从文献里抽出来的），很实用的一个网站。估计别的写文章的人不是傻子吧，它们的东西我们可以直接拿来用，当然省事了。网址告诉大家，有兴趣的进去看看，你们就会发现其乐无穷！还是很值得用的。 3、网路版金山词霸（不到1M）： 翻译时的速度： 这里我谈的是电子版和打印版的翻译速度，按个人翻译速度看，打印版的快些，因为看电子版本一是费眼睛，二是如果我们用电脑，可能还经常时不时玩点游戏，或者整点别的，导致最终SPPEED变慢，再之电脑上一些词典（金山词霸等）在专业翻译方面也不是特别好，所以翻译效果不佳。在此本人建议大家购买清华

大学毕业论文---软件专业外文文献中英文翻译

软件专业毕业论文外文文献中英文翻译 Object landscapes and lifetimes Tech nically, OOP is just about abstract data typing, in herita nee, and polymorphism, but other issues can be at least as importa nt. The rema in der of this sect ion will cover these issues. One of the most importa nt factors is the way objects are created and destroyed. Where is the data for an object and how is the lifetime of the object con trolled? There are differe nt philosophies at work here. C++ takes the approach that con trol of efficie ncy is the most importa nt issue, so it gives the programmer a choice. For maximum run-time speed, the storage and lifetime can be determined while the program is being written, by placing the objects on the stack (these are sometimes called automatic or scoped variables) or in the static storage area. This places a priority on the speed of storage allocatio n and release, and con trol of these can be very valuable in some situati ons. However, you sacrifice flexibility because you must know the exact qua ntity, lifetime, and type of objects while you're writing the program. If you are trying to solve a more general problem such as computer-aided desig n, warehouse man ageme nt, or air-traffic con trol, this is too restrictive. The sec ond approach is to create objects dyn amically in a pool of memory called the heap. In this approach, you don't know un til run-time how many objects you n eed, what their lifetime is, or what their exact type is. Those are determined at the spur of the moment while the program is runnin g. If you n eed a new object, you simply make it on the heap at the point that you n eed it. Because the storage is man aged dyn amically, at run-time, the amount of time required to allocate storage on the heap is sig ni fica ntly Ion ger tha n the time to create storage on the stack. (Creat ing storage on the stack is ofte n a si ngle assembly in structio n to move the stack poin ter dow n, and ano ther to move it back up.) The dyn amic approach makes the gen erally logical assumpti on that objects tend to be complicated, so the extra overhead of finding storage and releas ing that storage will not have an importa nt impact on the creati on of an object .In additi on, the greater flexibility is esse ntial to solve the gen eral program ming problem. Java uses the sec ond approach, exclusive". Every time you want to create an object, you use the new keyword to build a dyn amic in sta nee of that object. There's ano ther issue, however, and that's the lifetime of an object. With Ian guages that allow objects to be created on the stack, the compiler determines how long the object lasts and can automatically destroy it. However, if you create it on the heap the compiler has no kno wledge of its lifetime. In a Ianguage like C++, you must determine programmatically when to destroy the

客户关系管理外文文献翻译(2017)

XXX学院 毕业设计(论文)外文资料翻译 学院：计算机与软件工程学院 专业：计算机科学技术(软件工程方向) 姓名： 学号： 外文出处：GoyKakus.THE RESEARCH OFCUSTOMER RELATIONSHIP MANAGEMENT STRATEGY [J]. International Journal of Management Research & Review, 2017, 1(9): 624-635. 附件： 1.外文资料翻译译文；2.外文原文。 注：请将该封面与附件装订成册。

附件1：外文资料翻译译文 客户关系管理战略研究 Goy Kakus 摘要 客户关系管理解决方案，通过为你提供客户业务数据来帮助你提供客户想要的服务或产品,提供更好的客户服务、交叉销售和更有效的销售,达成交易,保留现有客户并更好地理解你的客户是谁。本文探讨了客户关系管理模型在获得、保持与发展策略方面的优势。然而,我们对其定义和意义还存在一些困惑。本文通过考察关系营销和其他学科方面的相关文献，解释了客户关系管理的概念基础,从而对客户关系管理的知识作出了贡献。 关键词:客户关系管理模型, 客户关系管理的博弈改变者与关键策略 引言 CRM 是客户关系管理的简称。它的特征在于公司与客户的沟通,无论是销售还是服务相关的。客户关系管理这一术语经常用来解释企业客户关系,客户关系管理系统也以同样的方式被用来处理商业联系, 赢得客户,达成合同和赢得销售。 客户关系管理通常被考虑作为一个业务策略，从而使企业能够: *了解客户 *通过更好的客户体验留住客户 *吸引新客户 *赢得新客户和达成合同 *提高盈利 *减少客户管理成本 *通过服务台等工具软件,电子邮件组织者和不同类型的企业应用程序，企业业务经常寻求个性化的在线体验。 设计精良的客户关系管理包括以下特征: 1．客户关系管理是一种以顾客为中心并以客户投入为基础的服务响应，一对一的解决客户的必需品, 买家和卖家服务中心直接在线互动,帮助客户解决他

毕业论文 外文翻译#(精选.)

毕业论文（设计）外文翻译 题目：中国上市公司偏好股权融资：非制度性因素 系部名称：经济管理系专业班级:会计082班 学生姓名：任民学号： 200880444228 指导教师：冯银波教师职称:讲师 年月日

译文： 中国上市公司偏好股权融资：非制度性因素 国际商业管理杂志 2009.10 摘要：本文把重点集中于中国上市公司的融资活动，运用西方融资理论，从非制度性因素方面，如融资成本、企业资产类型和质量、盈利能力、行业因素、股权结构因素、财务管理水平和社会文化，分析了中国上市公司倾向于股权融资的原因，并得出结论，股权融资偏好是上市公司根据中国融资环境的一种合理的选择。最后，针对公司的股权融资偏好提出了一些简明的建议。 关键词：股权融资，非制度性因素，融资成本 一、前言 中国上市公司偏好于股权融资，根据中国证券报的数据显示，1997年上市公司在资本市场的融资金额为95.87亿美元，其中股票融资的比例是72.5％，，在1998年和1999年比例分别为72.6％和72.3％，另一方面，债券融资的比例分别是17.8％，24.9％和25.1％。在这三年，股票融资的比例，在比中国发达的资本市场中却在下跌。以美国为例，当美国企业需要的资金在资本市场上，于股权融资相比他们宁愿选择债券融资。统计数据显示，从1970年到1985年，美日企业债券融资占了境外融资的91.7％，比股权融资高很多。阎达五等发现，大约中国3/4的上市公司偏好于股权融资。许多研究的学者认为，上市公司按以下顺序进行外部融资：第一个是股票基金，第二个是可转换债券，三是短期债务，最后一个是长期负债。许多研究人员通常分析我国上市公司偏好股权是由于我们国家的经济改革所带来的制度性因素。他们认为，上市公司的融资活动违背了西方古典融资理论只是因为那些制度性原因。例如，优序融资理论认为，当企业需要资金时，他们首先应该转向内部资金（折旧和留存收益），然后再进行债权融资，最后的选择是股票融资。在这篇文章中，笔者认为，这是因为具体的金融环境激活了企业的这种偏好，并结合了非制度性因素和西方金融理论，尝试解释股权融资偏好的原因。

java毕业论文外文文献翻译

Advantages of Managed Code Microsoft intermediate language shares with Java byte code the idea that it is a low-level language witha simple syntax , which can be very quickly translated intonative machine code. Having this well-defined universal syntax for code has significant advantages. Platform independence First, it means that the same file containing byte code instructions can be placed on any platform; atruntime the final stage of compilation can then be easily accomplished so that the code will run on thatparticular platform. In other words, by compiling to IL we obtain platform independence for .NET, inmuch the same way as compiling to Java byte code gives Java platform independence. Performance improvement IL is actually a bit more ambitious than Java bytecode. IL is always Just-In-Time compiled (known as JIT), whereas Java byte code was ofteninterpreted. One of the disadvantages of Java was that, on execution, the process of translating from Javabyte code to native executable resulted in a loss of performance. Instead of compiling the entire application in one go (which could lead to a slow start-up time), the JITcompiler simply compiles each portion of code as it is called (just-in-time). When code has been compiled.once, the resultant native executable is stored until the application exits, so that it does not need to berecompiled the next time that portion of code is run. Microsoft argues that this process is more efficientthan compiling the entire application code at the start, because of the likelihood that large portions of anyapplication code will not actually be executed in any given run. Using the JIT compiler, such code willnever be compiled.

工商管理专业外文文献翻译

Project Budget Monitor and Control Author：Yin Guo-li Nationality：American Derivation：Management Science and Engineering.Montreal: Mar 20, 2010 . With the marketing competitiveness growing, it is more and more critical in budget control of each project. This paper discusses that in the construction phase, how can a project manager be successful in budget control. There are many methods discussed in this paper, it reveals that to be successful, the project manager must concern all this methods. 1. INTRODUCTION The survey shows that most projects encounter cost over-runs (Williams Ackermann, Eden, 2002,pl92). According to Wright (1997)'s research, a good rule of thumb is to add a minimum of 50% to the first estimate of the budget (Gardiner and Stewart, 1998, p251). It indicates that project is very complex and full of challenge. Many unexpected issues will lead the project cost over-runs. Therefore, many technologies and methods are developed for successful monitoring and control to lead the project to success. In this article, we will discuss in the construction phase, how can a project manager to be successful budget control. 2. THE CONCEPT AND THE PURPOSE OF PROJECT CONTROL AND MONITOR Erel and Raz (2000) state that the project control cycle consists of measuring the status of the project, comparing to the plan, analysis of the deviations, and implementing any appropriate corrective actions. When a project reach the construction phase, monitor and control is critical to deliver the project success. Project monitoring exists to establish the need to take corrective action, whilst there is still time to take action. Through monitoring the activities, the project team can analyze the deviations and decide what to do and actually do it. The purpose of monitor and control is to support the implementation of corrective actions, ensure projects stay on target or get project back on target once it has gone off target。

电子信息工程专业毕业论文外文翻译中英文对照翻译

本科毕业设计（论文）中英文对照翻译 院（系部）电气工程与自动化 专业名称电子信息工程 年级班级 04级7班 学生姓名 指导老师

Infrared Remote Control System Abstract Red outside data correspondence the technique be currently within the scope of world drive extensive usage of a kind of wireless conjunction technique,drive numerous hardware and software platform support. Red outside the transceiver product have cost low, small scaled turn, the baud rate be quick, point to point SSL, be free from electromagnetism thousand Raos etc.characteristics, can realization information at dissimilarity of the product fast, convenience, safely exchange and transmission, at short distance wireless deliver aspect to own very obvious of advantage.Along with red outside the data deliver a technique more and more mature, the cost descend, red outside the transceiver necessarily will get at the short distance communication realm more extensive of application. The purpose that design this system is transmit cu stomer’s operation information with infrared rays for transmit media, then demodulate original signal with receive circuit. It use coding chip to modulate signal and use decoding chip to demodulate signal. The coding chip is PT2262 and decoding chip is PT2272. Both chips are made in Taiwan. Main work principle is that we provide to input the information for the PT2262 with coding keyboard. The input information was coded by PT2262 and loading to high frequent load wave whose frequent is 38 kHz, then modulate infrared transmit dioxide and radiate space outside when it attian enough power. The receive circuit receive the signal and demodulate original information. The original signal was decoded by PT2272, so as to drive some circuit to accomplish