毕业论文英文文献及翻译

毕业论文英文文献及翻译

————————————————————————————————作者：————————————————————————————————日期：

Based on GSM module and AT89C51 connection

design and application

---From 《GSM principle and its network optimization》chapter one

---From 《New single chip microcomputer interface device and technology》chapter six

Abstract

This article through analyzed the GSM module and the monolithic integrated circuit connection design simply introduced the TC35i module commonly used instruction and the coding rule, introduced emphatically the TC35i module and the AT89C51 principle of work, the periphery connection electric circuit, the software control technology, at the same time has produced some TC35i module and the AT89C51 connection application procedure, proposed AT89C51 when receive data should pay attention question, thus designed has the GSM module the data transmission terminal.

Key words: GSM network

1 Summarize:

Along with correspondence technique of development, according to the service function of the NTT DoCoMo net, just to industry control and control from a distance the realm have continuously extension of trend.Is orientation this kind of demand, Siemens company released a new generation wireless correspondence GSM mold piece-TC35i, according to should the short news function of the mold piece, can fast safety credibility realization customer information processing etc. function, special be applicable to control centre and terminal equipments distance very far, or inconvenience adoption wired correspondence lie quality etc. situation, for example the oil well information collect behind of deliver, the long range copy form system, city transportation direction etc. all according to the TC35i mold piece to realization.

2 The application of GSM network:

GSM is Global System for Mobile Communications acronym, which means Global System for Mobile Communications is the world's leading cellular systems in

the world. GSM is based on narrowband TDMA standard that allows radio frequency in a group call at the same time 8. GSM80 during the rise in Europe, put into use in 1991. The end of 1997, has operations in more than 100 countries, Europe and Asia has become the standard in fact, that by 2001, the world's 162 countries have already built a 400 GSM communications network. But the GSM system capacity is limited, users in the network overload, it had to construct additional network facilities. What is gratifying is that GSM performance in other areas, which in addition to providing a standardized list and signaling systems, but also opened up some of the more intelligent of the business such as international roaming and so on. The convenience of GSM mobile phone is that it provides a smart card, known as SIM cards, and card could be separated, so that the replacement of mobile phone users and custom personal information in this area are facilitated.

GSM network to improve after years of development, is now very mature, less blind spots, signal stability, automatic roaming, and the communication distance from the impact of the surrounding environment. GSM short message in particular, flexible and convenient, you can cross-market, inter-provincial and even cross-border transmission, and each send a short message as long as one dime, very reliable and affordable. In addition, the mobile phone SIM card in recent years can apply for 0, some packages use lower cost than fixed. Therefore the use of mobile phone message to achieve alarm, ultra long-range remote control for industrial equipment, transmission of data is a very good choice.

GSM module, is a similar mobile communication module, integrates a number of mobile phone functions on a single small circuit board, it can send SMS messages, calls and so on, the module is small, but it has a lot of mobile phone functionality, with its have equal is the core of the mobile phone, and it is in a lot of applications have a wide range of applications, GSM module through the use of AT commands to control it, modules can be connected to computer RS232 serial port, can also be used to carry out single-chip control . Below we cite some typical applications:

2.1 mobile phone access control system:

GSM Access Control System used to control the electric lock control, if you need to enter, as long as the cell phone call using GSM modules mobile number, will automatically open the door, and only you can set up cell phone numbers to open the door, and no costs.

2.2 three billboard over the weather disaster emergency turn off:

Over three billboards are constantly flip through the motor to achieve a number of ads displayed, because installed in the outdoors, when there is wind, hail and other weather disasters, billboards could easily be blown bad or damaged card die, when in need of emergency shut down, You can normally closed relay contact to control the power of advertising, when you need to do is send "turn off" control message, the billboard will automatically turn off, and automatically after a certain time delay automatically return to normal job (generally disastrous weather will not continue for a long time) in advance if you want to open a billboard, you can send "Open" control message.

2.3 engineering system balance reminders:

Some works are safe after the completion of the normal operation after a period of time to settle the balance, if the encounter malicious clients the outstanding purchase price, often installed side very headache, because equipment has been installed, if the loss of a great come back down, particularly in the field customer very costly when the client system can be installed in the GSM module, use it all the way to control system or the way some of the key points, when the customer paid in arrears when the malicious message can turn off some features, forcing customers to pay the purchase price then immediately open message, if you have a smooth recovery of the purchase price can also be the name of system maintenance by the GSM module removed from the client system.

2.4 monitoring systems or Web servers and reset the alarm:

Monitoring system or web server running after a long period after death may be wrong, this time to power on reset is the only solution at this time through the GSM module can control system power, and set to open automatically after 3 seconds turn off mode, can achieve power reduction, in addition, GSM module in some special application areas also played a very large role, such as: the disappearance of the main power supply, memory errors, fan shutdown, fuel depletion, it was the invasion and other information, are not people the ideal choice for monitoring the engine room.

2.5 the remote control of home appliances:

Through the message can easily achieve the remote control to open rice cookers, water heaters and other appliances by remote control or switch to repair mode can also control the air-conditioning GSM global wireless mobile communication network control alarm host, using the global GSM short message data transmission mode and voice-enabled platform for the completion of intelligent data transmission and remote

control alarm, set the host family, shops, office safety, electrical control, remote monitoring, such as Intelligent home functions, because of the global GSM wireless mobile communication network signal coverage area of Canton, and truly realize the low-cost high-quality ultra-long-distance convenient and flexible intelligent wireless control and alarm, to solve the fixed-line telephone or cable broadband network wired alarm limitations. GSM global wireless mobile communications network in popularity all over the world, the GSM global wireless mobile communication network control alarm can be widely used in a single host family, community property, electricity, transportation, petroleum, coal, railway, municipal and public security departments of the security industry prevention devices, data monitoring and remote monitoring system. Wireless Road, with 11 defense areas, 2-way Cable Standoff, different defense area alarm, alarm and message control, separate from a defended position, remote control, home appliance control, linkage to take photographs with the latest alarm center network characteristics.

Features:

1. Wireless suspects under strict surveillance, no wiring, and ease of installation.

2. Cable suspects under strict surveillance, safe and reliable.

3. Wireless remote control security / from a defended position, easy to operate.

4. Adaptability widely used global-band wireless mobile networks.

5. Password settings, confidentiality stronger.

6. Alarm, the high-decibel alarm sound to deter thieves.

7. Host automatically to six groups of mobile numbers to send SMS alerts. Alarm message and a telephone can be set up

8. Host automatically dial the six groups of mobile or fixed telephone warning, start-site monitoring.

9. Preset scene alarm and alarm message

10. With emergency alarm function, can prevent thieves burglary, detection of gas leaks and smoke fire.

11. Communicate electric missing Detect and alarm, to prevent the intentional destruction of the power system and power failure monitoring.

12. Communicate after the loss of electricity automatically switch to a back-up battery. 13. Available through GSM network platform and networking alarm center.

14. Supported message in Chinese or English instructions.

15. Handset intercom mode: Matching intercom calls, and alarm can be two-way

intercom, real-time clear police intelligence to prevent unnecessary alarm.

3 The TC35i mold piece introduction

Currently, domestic already beginning usage of the GSM mold piece have a lot, and these of function, method of using difference not big.What this design adoption is a Siemens TC35 the TC35i of the series.On this kind of wireless mold piece function and TC35 and permit, design tightly packed, consumedly contracted the physical volume of customer's product.The TC35i and GSM2/2 and permit,dual-band(GSM900/GSM1800), RS232 the data connect, should mold piece and radio frequency electric circuit and Ji take and integral whole, provide toward the customer standard of AT order connect, is data, speech, short news and fax provide fast, credibility, safety of deliver, convenience customer of application development and design.

3.1 The GSM AT instruction introduction that the mold has something to do with SMS in the piec e:

The order for provide of the GSM- powered mold piece match GSM07.05 and GSM07.07 norm.In the GSM07.07 definition of the AT Command connect and provided a kind of which GSM AT Instruction TC35i AT89C51

move terrace and data terminal equipments of in general use connect;The GSM07.05 made to the short news detailed of provision.At short news mold piece receive network hair of short news, can send out a designation information through a string of, the data terminal equipments can send out toward the GSM mold piece various order.The instruction of GSM AT having something to do with SMS such as List1 to show.The instruction of GSM AT gather, is signed letter, Motorola and HP etc. factory house by Nokia, love to together develop for the GSM system of, among them include control SMS(Short Message Service).

3.2 The PDU code rule:

Send out short news in common use Text and PDU(Protocol Data Unit, agreement data unit) mode currently.The usage Text mode receive and dispatch a message code simple, realization get up very easy, but the biggest weakness be to can't receive and dispatch Chinese message;But PDU mode not only support Chinese message, also the ability send out English message.The PDU mode receive and dispatch a message can the usage be 3 kinds of to code:7-bit, 8-bit and UCS2 code.7-the bit code to used for send out common of ASCII character list, 8-bit

code Be usually used for sending out data news, UCS2 code used for sending out Unicode character list.General PDU's code is constitute by ABCDEFGHIJKLM 13.

A:The address length of the message center, 216 enter to make number(one word stanza)

B:The number type of the message center, 216 enter to make number.

C:Message center number, B+C length will from the data decision

D:Document head word stanza, 216 enter to make number.

E:Information type, 216 enter to make number.

F:Drive call number length, 216 enter to make number.

G:Drive call number type, 216 enter to make number, take value together

H:Drive call number, length from data within F decision.

I:Agreement marking, 216 enter to make number.

J:The data code a project, 216 enter to make number.

K:Term of validity, 216 enter to make number. L:Customer data length, 216 enter to make number.

M:Customer's data, its length from the data decision in the L.Enactment in J adoption UCS2 code, here is the Unicode character list of Chinese-English.

4 the hardware of the TC35i and list slice machine connect a people's

electric circuit

The TC35i mold piece is main to save according to the processor, GSM radio frequency mold piece, power supply mold piece, Shan from the GSM, the ZIF conjunction machine, antenna connect six part constitute.Connect machine with a list slice machine realization electric circuit to connect through a ZIF, should connect read or send out the TC35i mold piece in of data.

5 list slice the software of the machine and TC35i connect and control

principle

8051 one-chip computer have four 8 walk abreast I/O port, call P0, P1, P2 and P3. Each port is 8 accurate two-way mouths, accounts for 32 pins altogether. Every one I/O line can be used as introduction and exported independently. Each port includes a latch (namely special function register ), one exports the driver and a introduction buffer . Make data can latch when outputting, data can buffer when making introduction , but four function of passway these self-same. Expand among the system of memory outside having slice, four port these may serve as accurate two-way mouth of I/O in common use. Expand among the system of memory outside

having slice, P2 mouth see high 8 address off; P0 mouth is a two-way bus, send the introduction of 8 low addresses and data / export in timesharing

List slice the software of the machine and TC35i connect in fact be list slice the machine pass AT instruction control cellular phone of control technique, first constitution the TC35i mold piece of work mode:AT+CMGF=n, n=0 is a PDU mode;N=1 write an article this mode;Usually the constitution is a PDU mode, under this kind of mode, ability transmission or accept a transparent data.(customer from definition data)AT+CMGR=n in order to read the short news data of the TC35i mold piece, the n is a short news number.AT+CMGL=n in order to list the short news in the TC35i mold piece, n=0 is the short news which read, n=a the short news which have been already read, n=2 short news which sent out, n=3 for have already send out of short news n=4 is all short news.AT+CMGD=the n is the short news which delete the TC35i mold piece and the n is a short news serial number.

6 Master routine

The software plait distance pass to write in toward the TC35i dissimilarity of AT instruction ability completion variety function, such as network debarkation, read SIM card top telephone number, send out SMS news and receive SMS news etc..

The instruction sign, constant, PDU data...etc. of AT instruction all code form transmission by ASCII;The transmission transparent data have to pair of the TC35i mold piece of work mode constitution is PDU mode;List slice machine toward the TC35i mold piece after send out each instruction have to with return to car sign conduct and actions should instruction of be over, for example list slice the machine send out instruction in"AT+ CMGF=0" toward the cellular phone, its ASCII code sequence is"41 H, 54 H, 2 BH, 42 H, 4 DH, 47 H, 46 H, 3 DH, 30 H, 0 DH", the last word stanza 0 DH is to return to car sign, mean that instruction be over, if have no this to return to car sign, the cellular phone won't identify this instruction.When the AT instruction which receive to an integrity of the TC35i mold piece after, the TC35i mold piece not summary execution should instruction, but first just receive of the ASCII of the AT instruction code sequence all anti- send out;(contain 0 DH)Secondly send out a the ASCII which return to car sign with a carriage return sign to code, namely 0 DH with 0 AH;Then performance should instruction.

The list slice machine read the PDU data of the TC35i mold piece, originality data should is 16 enter make number, but read back of data still is an ASCII mean of 16 enter make number.So a word stanza of 16 entered to make number and then

became 2 word stanza of ASMII code.But the PDU data data word stanza length within pack part still is actual character list length.But isn't the word stanza which become ASCII code length, this at plait distance should special attention, otherwise receive of data not integrity.The list slice machine is after receiving a PDU data pack data have to its instauration become 16 enter make a data, its calculate way as follows:Establish a for the ASCII code receive, b for the conversion is behind of 16 enter make number.So if a<39 H,

b=a-30 H;If a>39 H, b=h-07 H a-30.End pair of in front and back two pieces merger is a word stanza.

Concluding remark The usage cellular phone mold piece benefit is at the system integration, the cost be lower.Install correspondence circuit in secluded region etc. difficulty or uneconomical place, engineering service facilities can freedom vivid of constitution, no longer be subjected to geography condition of restriction.In fine, GSM mold piece the price be cheap, application extensive, application the foreground be captivating, pass with cellular phone mold the piece connect can very convenience of design customer demand of the data receive terminal.

毕业论文(英文翻译)排版格式

英文翻译说明 1. 英文翻译文章输成word，5号新罗马（New Times Roman）字体，1.5倍行间距，将来方便打印和一起装订；英文中的图表要重新画，禁止截图。 2. 整篇论文1.5倍行间距，打印时，用B5纸，版面上空2.5cm，下空2cm，左空2.5cm，右空2cm（左装订）。 3. 论文翻译后的摘要用五号宋体，正文小四号宋体、英文和数字用新罗马（New Times Roman）12、参考文献的内容用五号字体。图和表头用五号字体加粗并居中，图和表中的内容用五号字体。论文翻译的作者用五号字体加粗。 论文大标题………小三号黑体、加黑、居中 第二层次的题序和标题………小四号黑体、加黑、居中 第三层次的题序和标题………小四号宋体、加黑、居中 正文……………………………小四号宋体、英文用新罗马12 页码……………………………小五号居中，页码两边不加修饰符 4. 论文中参考文献严格按照下述排版。 专著格式：序号.编著者.书名[M].出版地: 出版社, 年代, 起止页码 期刊论文格式：序号.作者.论文名称[J]. 期刊名称, 年度, 卷(期): 起止页码 学位论文格式：序号.作者.学位论文名称[D]. 发表地: 学位授予单位, 年度 例子: (1).胡千庭, 邹银辉, 文光才等. 瓦斯含量法预测突出危险新技术[J]. 煤炭学报, 2007.32(3): 276-280. (2). 胡千庭. 煤与瓦斯突出的力学作用机理及应用研究[D]. 北京: 中国矿业大学(北京), 2007. (3). 程伟. 煤与瓦斯突出危险性预测及防治技术[M]. 徐州: 中国矿业大学出版社, 2003.

概率论毕业论文外文翻译

Statistical hypothesis testing Adriana Albu，Loredana Ungureanu Politehnica University Timisoara,adrianaa@aut.utt.ro Politehnica University Timisoara,loredanau@aut.utt.ro Abstract In this article,we present a Bayesian statistical hypothesis testing inspection, testing theory and the process Mentioned hypothesis testing in the real world and the importance of, and successful test of the Notes. Key words Bayesian hypothesis testing; Bayesian inference;Test of significance Introduction A statistical hypothesis test is a method of making decisions using data, whether from a controlled experiment or an observational study (not controlled). In statistics, a result is called statistically significant if it is unlikely to have occurred by chance alone, according to a pre-determined threshold probability, the significance level. The phrase "test of significance" was coined by Ronald Fisher: "Critical tests of this kind may be called tests of significance, and when such tests are available we may discover whether a second sample is or is not significantly different from the first."[1] Hypothesis testing is sometimes called confirmatory data analysis, in contrast to exploratory data analysis. In frequency probability,these decisions are almost always made using null-hypothesis tests. These are tests that answer the question Assuming that the null hypothesis is true, what is the probability of observing a value for the test statistic that is at [] least as extreme as the value that was actually observed?) 2 More formally, they represent answers to the question, posed before undertaking an experiment,of what outcomes of the experiment would lead to rejection of the null hypothesis for a pre-specified probability of an incorrect rejection. One use of hypothesis testing is deciding whether experimental results contain enough information to cast doubt on conventional wisdom. Statistical hypothesis testing is a key technique of frequentist statistical inference. The Bayesian approach to hypothesis testing is to base rejection of the hypothesis on the posterior probability.[3][4]Other approaches to reaching a decision based on data are available via decision theory and optimal decisions. The critical region of a hypothesis test is the set of all outcomes which cause the null hypothesis to be rejected in favor of the alternative hypothesis. The critical region is usually denoted by the letter C. One-sample tests are appropriate when a sample is being compared to the population from a hypothesis. The population characteristics are known from theory or are calculated from the population.

毕业论文外文翻译模板

农村社会养老保险的现状、问题与对策研究社会保障对国家安定和经济发展具有重要作用，“城乡二元经济”现象日益凸现，农村社会保障问题客观上成为社会保障体系中极为重要的部分。建立和完善农村社会保障制度关系到农村乃至整个社会的经济发展，并且对我国和谐社会的构建至关重要。我国农村社会保障制度尚不完善，因此有必要加强对农村独立社会保障制度的构建，尤其对农村养老制度的改革，建立健全我国社会保障体系。从户籍制度上看，我国居民养老问题可分为城市居民养老和农村居民养老两部分。对于城市居民我国政府已有比较充足的政策与资金投人，使他们在物质和精神方面都能得到较好地照顾，基本实现了社会化养老。而农村居民的养老问题却日益突出，成为摆在我国政府面前的一个紧迫而又棘手的问题。 一、我国农村社会养老保险的现状 关于农村养老，许多地区还没有建立农村社会养老体系，已建立的地区也存在很多缺陷，运行中出现了很多问题，所以完善农村社会养老保险体系的必要性与紧迫性日益体现出来。 （一）人口老龄化加快 随着城市化步伐的加快和农村劳动力的输出，越来越多的农村青壮年人口进入城市，年龄结构出现“两头大，中间小”的局面。中国农村进入老龄社会的步伐日渐加快。第五次人口普查显示：中国65岁以上的人中农村为5938万，占老龄总人口的67.4%.在这种严峻的现实面前，农村社会养老保险的徘徊显得极其不协调。 （二）农村社会养老保险覆盖面太小 中国拥有世界上数量最多的老年人口，且大多在农村。据统计，未纳入社会保障的农村人口还很多，截止2000年底，全国7400多万农村居民参加了保险，占全部农村居民的11.18%，占成年农村居民的11.59%.另外，据国家统计局统计，我国进城务工者已从改革开放之初的不到200万人增加到2003年的1.14亿人。而基本方案中没有体现出对留在农村的农民和进城务工的农民给予区别对待。进城务工的农民既没被纳入到农村养老保险体系中，也没被纳入到城市养老保险体系中，处于法律保护的空白地带。所以很有必要考虑这个特殊群体的养老保险问题。

毕业论文英文参考文献与译文

Inventory management Inventory Control On the so-called "inventory control", many people will interpret it as a "storage management", which is actually a big distortion. The traditional narrow view, mainly for warehouse inventory control of materials for inventory, data processing, storage, distribution, etc., through the implementation of anti-corrosion, temperature and humidity control means, to make the custody of the physical inventory to maintain optimum purposes. This is just a form of inventory control, or can be defined as the physical inventory control. How, then, from a broad perspective to understand inventory control? Inventory control should be related to the company's financial and operational objectives, in particular operating cash flow by optimizing the entire demand and supply chain management processes (DSCM), a reasonable set of ERP control strategy, and supported by appropriate information processing tools, tools to achieved in ensuring the timely delivery of the premise, as far as possible to reduce inventory levels, reducing inventory and obsolescence, the risk of devaluation. In this sense, the physical inventory control to achieve financial goals is just a means to control the entire inventory or just a necessary part; from the perspective of organizational functions, physical inventory control, warehouse management is mainly the responsibility of The broad inventory control is the demand and supply chain management, and the whole company's responsibility. Why until now many people's understanding of inventory control, limited physical inventory control? The following two reasons can not be ignored: First, our enterprises do not attach importance to inventory control. Especially those who benefit relatively good business, as long as there is money on the few people to consider the problem of inventory turnover. Inventory control is simply interpreted as warehouse management, unless the time to spend money, it may have been to see the inventory problem, and see the results are often very simple procurement to buy more, or did not do warehouse departments . Second, ERP misleading. Invoicing software is simple audacity to call it ERP, companies on their so-called ERP can reduce the number of inventory, inventory control, seems to rely on their small software can get. Even as SAP, BAAN ERP world, the field of

毕业论文外文翻译模版

吉林化工学院理学院 毕业论文外文翻译English Title（Times New Roman ，三号） 学生学号：08810219 学生姓名：袁庚文 专业班级：信息与计算科学0802 指导教师：赵瑛 职称副教授 起止日期：2012.2.27～2012.3.14 吉林化工学院 Jilin Institute of Chemical Technology

1 外文翻译的基本内容 应选择与本课题密切相关的外文文献（学术期刊网上的），译成中文，与原文装订在一起并独立成册。在毕业答辩前，同论文一起上交。译文字数不应少于3000个汉字。 2 书写规范 2.1 外文翻译的正文格式 正文版心设置为：上边距：3.5厘米，下边距：2.5厘米，左边距：3.5厘米，右边距：2厘米，页眉：2.5厘米，页脚：2厘米。 中文部分正文选用模板中的样式所定义的“正文”，每段落首行缩进2字；或者手动设置成每段落首行缩进2字，字体：宋体，字号：小四，行距：多倍行距1.3，间距：前段、后段均为0行。 这部分工作模板中已经自动设置为缺省值。 2.2标题格式 特别注意：各级标题的具体形式可参照外文原文确定。 1．第一级标题（如：第1章绪论）选用模板中的样式所定义的“标题1”，居左；或者手动设置成字体：黑体，居左，字号：三号，1.5倍行距，段后11磅，段前为11磅。 2．第二级标题（如：1.2 摘要与关键词）选用模板中的样式所定义的“标题2”，居左；或者手动设置成字体：黑体，居左，字号：四号，1.5倍行距，段后为0，段前0.5行。 3．第三级标题（如：1.2.1 摘要）选用模板中的样式所定义的“标题3”，居左；或者手动设置成字体：黑体，居左，字号：小四，1.5倍行距，段后为0，段前0.5行。 标题和后面文字之间空一格（半角）。 3 图表及公式等的格式说明 图表、公式、参考文献等的格式详见《吉林化工学院本科学生毕业设计说明书（论文）撰写规范及标准模版》中相关的说明。

java毕业论文外文文献翻译

Advantages of Managed Code Microsoft intermediate language shares with Java byte code the idea that it is a low-level language witha simple syntax , which can be very quickly translated intonative machine code. Having this well-defined universal syntax for code has significant advantages. Platform independence First, it means that the same file containing byte code instructions can be placed on any platform; atruntime the final stage of compilation can then be easily accomplished so that the code will run on thatparticular platform. In other words, by compiling to IL we obtain platform independence for .NET, inmuch the same way as compiling to Java byte code gives Java platform independence. Performance improvement IL is actually a bit more ambitious than Java bytecode. IL is always Just-In-Time compiled (known as JIT), whereas Java byte code was ofteninterpreted. One of the disadvantages of Java was that, on execution, the process of translating from Javabyte code to native executable resulted in a loss of performance. Instead of compiling the entire application in one go (which could lead to a slow start-up time), the JITcompiler simply compiles each portion of code as it is called (just-in-time). When code has been compiled.once, the resultant native executable is stored until the application exits, so that it does not need to berecompiled the next time that portion of code is run. Microsoft argues that this process is more efficientthan compiling the entire application code at the start, because of the likelihood that large portions of anyapplication code will not actually be executed in any given run. Using the JIT compiler, such code willnever be compiled.

毕业论文英文文献翻译 之 中文翻译

译文 学院：土建学院专业：土木工程学号：064&&&&&&&姓名：&&&&&& 指导教师： &&&&&&教授

江苏科技大学 2010年 03 月 28 日 均布荷载作用下挡土墙上的土压力 G. I. Shvetsov UDC 624.131.531.2 在前一篇文章中，我们确定了在只考虑填土自重的试验条件下，作用在挡土墙上的压力。这篇文章是第一篇文章的延续，致力于探索填土在外界均布荷载作用下，在挡土墙上产生的荷载问题，当在使用到先前得到的岩土平衡微分方程时，我们仅仅只改变边界条件，因为在这种情况下我们使用了与初始解决方案相同的原理。我们只提取那些与附加土压力有关的新成果，以及仅定义那些第一次出现的新符号。 在设计中，我们通常把作用在挡土墙上的土压力看作是呈三角形分布的，应力也被假设为是沿着墙体均匀连续分布的，但是实验结果并没有证实这一理论，试验表明表面

的附加应力随墙的高度变化并不均匀，而是从回填土顶部的最大值开始一直减小到其底部的最小值。因而，在M.C.瓦尔跟实验图的纵坐标的最大值超出理论计算值近两倍，最小值达到理论计算值的0.65倍，因为土压力的增加主要是在墙的上部，由此所得出的作用点比计算所得出的要高很多。 F.M.shikhiev 的理论里包含了关于挡土墙均布荷载作用下的二维应力折减问题，但是， 附加应力的分布对挡土墙受超荷载作用的效果问题的影响，并没有经过合适的理论研究。 虽然，不同研究人员所做的无数次试验已经确定，侧壁的扭曲效应更大，随着表面的粗糙程度而变大，随挡土墙的宽度和高度之比。在这篇文章里，我们将尽可能的填补这方面的空白。 在边界条件0q 0,y x ==的基础上，我们可以确定试验中作用在有侧向限制的填土上没有超荷的垂直应力。如果一个外附加应力作用在楔块表面上的强度为x σ，则在这种情况下，我们可以从已知条件得出，当y=0时，x q = x σ，既可以得出方程 ()()1 1 1/2/k x x w w h y h A q f m h A λσξ+-=+ （1） 其中 ，荷载分配的不均匀系数A 1和土的深度有关： ()() 111/1/k k A y h y h -= --- （2） 方程一是通用的，因为对于任意一种荷载分布x σ它都可以计算出任意土层中某一点的应力，因此便足以表明应力在X 轴方向的分布规律。当0=x σ时，方程便简化成相应的没有附加应力的形式，并且，当0=w f 而且0>x σ时，它反映了在考虑了附加应力条件时的二维问题，即： 11k x x h y q A h γσ?? =+- ??? （3） 满布在滑动楔上的均布荷载对我们已经知道的设计系数k ，n,和ξw 的值并没有影响，所以，计算作用在挡土墙上的正应力，切应力和总应力的表达式如下：

大学毕业论文---软件专业外文文献中英文翻译

软件专业毕业论文外文文献中英文翻译 Object landscapes and lifetimes Tech nically, OOP is just about abstract data typing, in herita nee, and polymorphism, but other issues can be at least as importa nt. The rema in der of this sect ion will cover these issues. One of the most importa nt factors is the way objects are created and destroyed. Where is the data for an object and how is the lifetime of the object con trolled? There are differe nt philosophies at work here. C++ takes the approach that con trol of efficie ncy is the most importa nt issue, so it gives the programmer a choice. For maximum run-time speed, the storage and lifetime can be determined while the program is being written, by placing the objects on the stack (these are sometimes called automatic or scoped variables) or in the static storage area. This places a priority on the speed of storage allocatio n and release, and con trol of these can be very valuable in some situati ons. However, you sacrifice flexibility because you must know the exact qua ntity, lifetime, and type of objects while you're writing the program. If you are trying to solve a more general problem such as computer-aided desig n, warehouse man ageme nt, or air-traffic con trol, this is too restrictive. The sec ond approach is to create objects dyn amically in a pool of memory called the heap. In this approach, you don't know un til run-time how many objects you n eed, what their lifetime is, or what their exact type is. Those are determined at the spur of the moment while the program is runnin g. If you n eed a new object, you simply make it on the heap at the point that you n eed it. Because the storage is man aged dyn amically, at run-time, the amount of time required to allocate storage on the heap is sig ni fica ntly Ion ger tha n the time to create storage on the stack. (Creat ing storage on the stack is ofte n a si ngle assembly in structio n to move the stack poin ter dow n, and ano ther to move it back up.) The dyn amic approach makes the gen erally logical assumpti on that objects tend to be complicated, so the extra overhead of finding storage and releas ing that storage will not have an importa nt impact on the creati on of an object .In additi on, the greater flexibility is esse ntial to solve the gen eral program ming problem. Java uses the sec ond approach, exclusive". Every time you want to create an object, you use the new keyword to build a dyn amic in sta nee of that object. There's ano ther issue, however, and that's the lifetime of an object. With Ian guages that allow objects to be created on the stack, the compiler determines how long the object lasts and can automatically destroy it. However, if you create it on the heap the compiler has no kno wledge of its lifetime. In a Ianguage like C++, you must determine programmatically when to destroy the

毕业论文5000字英文文献翻译

英文翻译 英语原文： . Introducing Classes The only remaining feature we need to understand before solving our bookstore problem is how to write a data structure to represent our transaction data. In C++ we define our own data structure by defining a class. The class mechanism is one of the most important features in C++. In fact, a primary focus of the design of C++ is to make it possible to define class types that behave as naturally as the built-in types themselves. The library types that we've seen already, such as istream and ostream, are all defined as classesthat is,they are not strictly speaking part of the language. Complete understanding of the class mechanism requires mastering a lot of information. Fortunately, it is possible to use a class that someone else has written without knowing how to define a class ourselves. In this section, we'll describe a simple class that we canuse in solving our bookstore problem. We'll implement this class in the subsequent chapters as we learn more about types,expressions, statements, and functionsall of which are used in defining classes. To use a class we need to know three things: What is its name? Where is it defined? What operations does it support? For our bookstore problem, we'll assume that the class is named Sales_item and that it is defined in a header named Sales_item.h. The Sales_item Class The purpose of the Sales_item class is to store an ISBN and keep track of the number of copies sold, the revenue, and average sales price for that book. How these data are stored or computed is not our concern. To use a class, we need not know anything about how it is implemented. Instead, what we need to know is what operations the class provides. As we've seen, when we use library facilities such as IO, we must include the associated headers. Similarly, for our own classes, we must make the definitions associated with the class available to the compiler. We do so in much the same way. Typically, we put the class definition into a file. Any program that wants to use our class must include that file. Conventionally, class types are stored in a file with a name that, like the name of a program source file, has two parts: a file name and a file suffix. Usually the file name is the same as the class defined in the header. The suffix usually is .h, but some programmers use .H, .hpp, or .hxx. Compilers usually aren't picky about header file names, but IDEs sometimes are. We'll assume that our class is defined in a file named Sales_item.h. Operations on Sales_item Objects

大学毕业论文英文翻译及原文

大学毕业论文英文翻译 中文译文 计算机网络 每个一个世纪都有一种主导地位的技术。18世纪伴随着工业革命的到来的是大型机械系统的时代；19世纪是蒸汽机的时代，而20世纪的发展历程中，关键的技术是信息收集、处理和分发。在其他的发展方面，我们还可以看到：遍布全球的电话网络的建立起来了，无线电广播和电视的出现了，计算机工业诞生了，并且以超乎想象的速度在成长；另外通信卫星也发射上天了。 技术的快速发展的一个直接结果是，这些领域正在快速地融合，信息收集、传输、存储和处理之间的差别正在迅速地消失。对于具有数百个办公室的大型组织来说，尽管这些办公室分布在广阔的地理区域中，但未来期望的情景是，工作人员只要单击一下按钮，就可以查看最远处分部的状态。随着信息收集、处理和分发能力的不断提高，我们对于更加复杂的信息处理技术的需求也增长得更快。 与其他的工业(比如汽车和航空运输业)相比，计算机工业还是非常年轻，尽管如此，计算机技术却在很短的时间内有了惊人的进展。在计算机诞生之初的20年间，计算机系统是高度集中化的，通常位于一个很大的房间中。该房间通常配有玻璃墙，参观的人透过玻璃墙可以欣赏到里边伟大的电子奇迹。中等规模的公司或者大学可能会有一台或者两台计算机，而大型的研究机构最多也就几十台计算机。要在20年内生产出大量同样功能但是体积比邮票还小的计算机，在当时的人们看来纯属科学幻想。 计算机和通信的结合对于计算机系统的组织方式产生了深远的影响。把一台大型的计算机放在一个单独的房间中，然后用户带着他们的处理任务去房间里上机，这种"计算机中心"的概念现在已经完全过时了。由一台计算机来处理整个组织中所有的计算需求，这种老式的模型已经被新的模型所取代，在新的模型下，由大量独立的，但相互连接起来的计算机来共同完成计算任务。这些系统称为计算机网络(computer networks)。如何设计这些网络，并且将这些网络组织起来，这就是本书的主题。 在本书中，我们将使用术语"计算机网络"来表示通过同一种技术相互连接起来的一组自主计算机的集合。如果两台计算机能够交换信息，则称

毕业论文 外文翻译#(精选.)

毕业论文（设计）外文翻译 题目：中国上市公司偏好股权融资：非制度性因素 系部名称：经济管理系专业班级:会计082班 学生姓名：任民学号： 200880444228 指导教师：冯银波教师职称:讲师 年月日

译文： 中国上市公司偏好股权融资：非制度性因素 国际商业管理杂志 2009.10 摘要：本文把重点集中于中国上市公司的融资活动，运用西方融资理论，从非制度性因素方面，如融资成本、企业资产类型和质量、盈利能力、行业因素、股权结构因素、财务管理水平和社会文化，分析了中国上市公司倾向于股权融资的原因，并得出结论，股权融资偏好是上市公司根据中国融资环境的一种合理的选择。最后，针对公司的股权融资偏好提出了一些简明的建议。 关键词：股权融资，非制度性因素，融资成本 一、前言 中国上市公司偏好于股权融资，根据中国证券报的数据显示，1997年上市公司在资本市场的融资金额为95.87亿美元，其中股票融资的比例是72.5％，，在1998年和1999年比例分别为72.6％和72.3％，另一方面，债券融资的比例分别是17.8％，24.9％和25.1％。在这三年，股票融资的比例，在比中国发达的资本市场中却在下跌。以美国为例，当美国企业需要的资金在资本市场上，于股权融资相比他们宁愿选择债券融资。统计数据显示，从1970年到1985年，美日企业债券融资占了境外融资的91.7％，比股权融资高很多。阎达五等发现，大约中国3/4的上市公司偏好于股权融资。许多研究的学者认为，上市公司按以下顺序进行外部融资：第一个是股票基金，第二个是可转换债券，三是短期债务，最后一个是长期负债。许多研究人员通常分析我国上市公司偏好股权是由于我们国家的经济改革所带来的制度性因素。他们认为，上市公司的融资活动违背了西方古典融资理论只是因为那些制度性原因。例如，优序融资理论认为，当企业需要资金时，他们首先应该转向内部资金（折旧和留存收益），然后再进行债权融资，最后的选择是股票融资。在这篇文章中，笔者认为，这是因为具体的金融环境激活了企业的这种偏好，并结合了非制度性因素和西方金融理论，尝试解释股权融资偏好的原因。

电子信息工程专业毕业论文外文翻译中英文对照翻译

本科毕业设计（论文）中英文对照翻译 院（系部）电气工程与自动化 专业名称电子信息工程 年级班级 04级7班 学生姓名 指导老师

Infrared Remote Control System Abstract Red outside data correspondence the technique be currently within the scope of world drive extensive usage of a kind of wireless conjunction technique,drive numerous hardware and software platform support. Red outside the transceiver product have cost low, small scaled turn, the baud rate be quick, point to point SSL, be free from electromagnetism thousand Raos etc.characteristics, can realization information at dissimilarity of the product fast, convenience, safely exchange and transmission, at short distance wireless deliver aspect to own very obvious of advantage.Along with red outside the data deliver a technique more and more mature, the cost descend, red outside the transceiver necessarily will get at the short distance communication realm more extensive of application. The purpose that design this system is transmit cu stomer’s operation information with infrared rays for transmit media, then demodulate original signal with receive circuit. It use coding chip to modulate signal and use decoding chip to demodulate signal. The coding chip is PT2262 and decoding chip is PT2272. Both chips are made in Taiwan. Main work principle is that we provide to input the information for the PT2262 with coding keyboard. The input information was coded by PT2262 and loading to high frequent load wave whose frequent is 38 kHz, then modulate infrared transmit dioxide and radiate space outside when it attian enough power. The receive circuit receive the signal and demodulate original information. The original signal was decoded by PT2272, so as to drive some circuit to accomplish