电子类从无线电世界到单片机世界毕业论文外文文献翻译及原文

毕业设计（论文）外文文献翻译

文献、资料中文题目：从无线电世界到单片机世界

文献、资料英文题目：

文献、资料来源：

文献、资料发表（出版）日期：

院（部）：

专业：

班级：

姓名：

学号：

指导教师：

翻译日期： 2017.02.14

中文翻译：

从无线电世界到单片机世界现代计算机技术的产业革命,将世界经济从资本经济带入到知识经济时代.在电子世界领域,从20 世纪中的无线电时代也进入到21 世纪以计算机技术为中心的智能化现代电子系统时代.现代电子系统的基本核心是嵌入式计算机系统(简称嵌入式系统),而单片机是最典型,最广泛,最普及的嵌入式系统. 一, 无线电世界造就了几代英才在20 世纪五六十年代,最具代表的先进的电子技术就是无线电技术, 包括无线电广播,收音,无线通信(电报),业余无线电台,无线电定位,导航等遥测,遥控,遥信技术.早期就是这些电子技术带领着许多青少年步入了奇妙的电子世界,无线电技术展示了当时科技生活美妙的前景.电子科学开始形成了一门新兴学科.无线电电子学,无线通信开始了电子世界的历程. 无线电技术不仅成为了当时先进科学技术的代表,而且从普及到专业的科学领域,吸引了广大青少年,并使他们从中找到了无穷的乐趣. 从床头的矿石收音机到超外差收音机;从无线电发报到业余无线电台;从电话,电铃到无线电操纵模型.无线电技术成为当时青少年科普,科技教育最普及,最广泛的内容.至今,许多老一辈的工程师,专家,教授当年都是无线电爱好者.无线电技术的无穷乐趣,无线电技术的全面训练,从电子学基本原理,电子元器件基础到无线电遥控,遥测,遥信电子系统制作,培养出了几代科技英才. 二, 从无线电时代到电子技术普及时代早期的无线电技术推动了电子技术的发展,其中最主要的是真空管电子技术向半导体电子技术的发展.半导体电子技术使有源器件实现了微小型化和低成本,使无线电技术有了更大普及和创新,并大大地开阔了许多非无线电的控制领域. 半导体技术发展导致集成电路器件的产生,形成了近代电子技术的飞跃,电子技术从分立器件时代走进了电路集成时代.电子设计工程师不再用分立的电子元器件设计电路单元,而直接选择集成化的电路单元器件构成系统.他们从电路单元设计中解放出来,致力于系统设计,大大地解放了科技生产力,促进了电子系统更大范围的普及.

半导体集成电路首先在基本数字逻辑电路上取得突破.大量数字逻辑电路,如门电路,计数器,定时器,移位寄存器以及模拟开关,比较器等, 为电子数字控制提供了极佳的条件,使传统的机械控制转向电子控制.功率电子器件以及传感技术的发展使原先以无线电为中心的电子技术开始转向工程领域中的机械系统的数字控制,检测领域中的信息采集,运动机械对象的电气伺服驱动控制. 半导体及其集成电路技术将我们带入了一个电子技术普及时代,无线电技术成为电子技术应用领域的一个部分. 进入20 世纪70 年代,大规模集成电路出现,促进了常规的电子电路单元的专用电子系统发展.许多专用电子系统单元变成了集成化器件,如收音机,电子钟,计算器等,在这些领域的电子工程师从电路,系统的精心设计,调试转变为器件选择,外围器件适配工作.电子技术发展了,电子产品丰富了,电子工程师的难度减少了,但与此同时,无线电技术,电子技术的魅力却削弱了.半导体集成电路的发展使经典电子系统日趋完善, 留在大规模集成电路以外的电子技术日益减少,电子技术没有了往昔无线电时代的无穷乐趣和全面的工程训练. 三, 从经典电子技术时代到现代电子技术时代进入20 世纪80 年代,世纪经济中最重要的变革是计算机的产业革命. 而计算机产业革命的最重要标志则是计算机嵌入式应用的诞生.近代电子计算机是应数值计算要求诞生的.在很长的时间内,电子计算机都是以发展海量数值计算为己任.但是电子计算机表现出的逻辑运算,处理,控制能力,吸引了电子控制领域的专家,他们要求发展能满足控制对象要求, 实现嵌入式应用的计算机系统.如果将满足海量数据处理的计算机系统称为通用计算机系统, 那么则可把嵌入到对象体系(如舰船,飞机,机车等) 中的计算机系统称作嵌入式计算机.显而易见,两者的技术发展方向是不同的.前者要求海量数据存储,吞吐,高速数据处理分析及传输;而后者

要求在对象环境中可靠运行,对外部物理参数的高速采集,逻辑分析处理和对外部对象的快速控制等.早期人们将通用计算机加上数据采集单元, 输出驱动电路勉为其难地构成一个热处理炉的温控系统.这样的通用计算机系统不可能为大多数电子系统采用,而且要使通用计算机系统满足嵌入式应用要求,必然影响高速数值处理技术的发展.为了解决计算机技术发展的矛盾,在20 世纪70 年代,半导体专家另辟蹊径,完全按照电子系统的计算机嵌入式应用要求,将一个微型计算机的基本系统集成在一个芯片上,形成了早期的单片机(Single Chip Microcomputer).单片机问世后,在计算机领域中开始出现了通用计算机系统和嵌入式系统的两大分支.此后, 无论是嵌入式系统,还是通用计算机系统都得到了飞速的发展. 早期虽然有通用计算机改装而成的嵌入式计算机系统,而真正意义上的嵌入式系统始于单片机的出现.因为单片机是专门为嵌入式应用设计的, 单片机只能实现嵌入式应用.单片机能最好地满足嵌入式应用的环境要求, 例如,芯片级的物理空间,大规模集成电路的低价位,良好的外围接口总线和突出控制功能的指令系统. 单片机有计算机系统内核,嵌入到电子系统中,为电子系统智能化奠定了基础.因此,当前单片机在电子系统中的广泛使用,使经典电子系统迅速过渡到智能化的现代电子系统. 四, 单片机开创了现代电子系统时代 1 单片机与嵌入式系统嵌入式系统源于计算机的嵌入式应用,早期嵌入式系统为通用计算机经改装后嵌入到对象体系中的各种电子系统,如舰船的自动驾驶仪,轮机监测系统等.嵌入式系统首先是一个计算机系统,其次它被嵌入到对象体系中,在对象体系中实现对象要求的数据采集,处理,状态显示,输出控制等功能,由于嵌入在对象体系中,嵌入式系统的计算机没有计算机的独立形式及功能.单片机完全是按照嵌入式系统要求设计的,因此单片机是最典型的嵌入式系统.早期的单片机只是按嵌入式应用技术要求设计的计算机单芯片集成,故名单片机.随后,单片机为满足嵌入式应用要求不断增强其控制功能与外围接口功能,尤其是突出控制功能,因此国际上已将单片机正名为微控制器(MCU,Microcontroller Unit). 2 单片机构成的现代电子系统将成为主流电子系统单片机构成的现代电子系统将成为主流电子系统单片机是器件级计算机系统,它可以嵌入到任何对象体系中去,实现智能化控制.小到微型机械,如手表,助听器.集成器件级的低价位,低到几元,十几元,足以使单片机普及到许多民用家电,电子玩具中去.单片机构成的现代电子系统已深入到各家各户,正改变我们的生活,如家庭中的音响,电视机,洗衣机,微波炉,电话,防盗系统,空调机等.单片

机革新了原有电子系统,如微波炉采用单片机控制后,可方便地进行时钟设置,程序记忆,功率控制;空调机采用单片机后不但遥控参数设置方便, 运行状态自动变换,还可实现变频控制.目前许多家用电器如VCD,DVD 只有单片机出现后才可能实现其功能. 3 嵌入式系统带动了整个电子产业目前电子元器件产业除了微处理器,嵌入式系统器件外,大多是围绕现代电子系统配套的元器件产业,例如满足人机交互用的按键,LED/LCD 显示驱动,LED/LCD 显示单元,语音集成器件等,满足数据采集通道要求的数字传感器,ADC,数据采集模块,信号调理模块等,满足伺服驱动控制的DAC,固体继电器,步进电机控制器,变频控制单元等,满足通信要求的各种总线驱动器,电平转换器等. 世界电子元器件在嵌入式系统带动下,沿着充分满足嵌入式应用的现代电子系统要求发展.这就使原来经典电子系统的天地愈来愈小.电子系统中的各类从业人员应尽早转向现代电子系统的康庄大道. 五, 单片机将造就新一代电子精英如果说五十年代起,无线电世界造就了几代精英,那么当今的单片机世界将会造就出新一代电子精英. 1 单片机带你进入智能化电子领域若将经典电子系统当作一个僵死的电子系统,那么智能化的现代电子系统则是一个具有"生命"的电子系统. 单片机应用系统的硬件结构给予电子系统"身躯",单片机应用系统的应用程序赋予其"生命".例如,在设计智能化仪器显示器的显示功能时,可在开机时显示系统自检结果,未进入工作时显示各种待机状态,仪器运行时显示运行过程,工作结束后可显示当前结果,自检结果,原始数据,各种处理报表等.在无人值守时,可给定各种自动运行功能. 电子系统的智能化为无止境境界,常常不需硬件

资源的增添就能实现各种翻新功能.这也是当前许多家用电器功能大量增设的因素之一. 2 单片机带你进入计算机工控领域21 世纪是全人类进入计算机时代的世纪,许多人不是在制造计算机便是在使用计算机.在使用计算机的人们中,只有从事嵌入式系统应用的人才真正地进入到计算机系统的内部软,硬件体系中,才能真正领会计算机

的智能化本质并掌握智能化设计的知识.从学习单片机应用技术入手是当今培养计算机应用软,硬件技术人才的最佳道路之一. 3 单片机带你进入最具魅力的电子世界独具魅力的单片机能使你体会到电脑的真谛,你可以用单片机亲自动手设计智能玩具,可以设计不同的应用程序实现不同的功能.既有硬件制作又有软件设计,既动脑,又动手.初级水平可开发智能玩具,用宏指令编程.中级水平可开发一些智能控制器,如电脑鼠,智能车,各种遥控模型.高级水平可开发机器人,如机器人足球赛,开发工业控制单元,网络通信等,并用汇编语言或高级语言设计应用程序.围绕单片机及嵌入式系统形成的电子产业的未来,将会为电子爱好者提供广阔的天地,一个比当年无线电世界更广阔,更丰富,更持久,更具魅力的电子世界.投身到单片机世界来,将使你一生受益. 单片机攻击技术目前,攻击单片机主要有四种技术,分别是: ( 1 ) 软件攻击该技术通常使用处理器通信接口并利用协议,加密算法或这些算法中的安全漏洞来进行攻击.软件攻击取得成功的一个典型事例是对早期A TMEL AT89C 系列单片机的攻击.攻击者利用了该系列单片机擦除操作时序设计上的漏洞,使用自编程序在擦除加密锁定位后,停止下一步擦除片内程序存储器数据的操作,从而使加过密的单片机变成没加密的单片机,然后利用编程器读出片内程序. ( 2 ) 电子探测攻击该技术通常以高时间分辨率来监控处理器在正常操作时所有电源和接口连接的模拟特性,并通过监控它的电磁辐射特性来实施攻击.因为单片机是一个活动的电子器件,当它执行不同的指令时,对应的电源功率消耗也相应变化.这样通过使用特殊的电子测量仪器和数学统计方法分析和检测这些变化,即可获取单片机中的特定关键信息. ( 3 ) 过错产生技术该技术使用异常工作条件来使处理器出错,然后提供额外的访问来进行攻击.使用最广泛的过错产生攻击手段包括电压冲击和时钟冲击.低电压和高电压攻击可用来禁止保护电路工作或强制处理器执行错误操作.时钟瞬态跳变也许会复位保护电路而不会破坏受保护信息.电源和时钟瞬态跳变可以在某些处理器中影响单条指令的解码和执行. ( 4 ) 探针技术该技术是直接暴露芯片内部连线,然后观察,操控,干扰单片机以达到攻击目的.为了方便起见,人们将以上四种攻击技术分成两类,一类是侵入型攻击(物理攻击),这类攻击需要破坏封装,然后借助半导体测试设备,显微镜和微定位器,在专门的实验室花上几小时甚至几周时间才能完成.所有的微探针技术都属于侵入型攻击.另外三种方法属于非侵入型攻击,被攻击的单片机不会被物理损坏.在某些场合非侵入型攻击是特别危险的,但是因为非侵入型攻击所需设备通常可以自制和升级,因此非常廉价. 大部分非侵入型攻击需要攻击者具备良好的处理器知识和软件知识. 与之相反,侵入型的探针攻击则不需要太多的初始知识,而且通常可用一整套相似的技术对付宽范围的产品. 单片机侵入型攻击的一般过程侵入型攻击的第一步是揭去芯片封装.有两种方法可以达到这一目的: 第一种是完全溶解掉芯片封装,暴露金属连线.第二种是只移掉硅核上面的塑料封装.第一种方法需要将芯片绑定到测试夹具上,借助绑定台来操作.第二种方法除了需要具备攻击者一定的知识和必要的技能外,还需要个人的智慧和耐心,但操作起来相对比较方便. 芯片上面的塑料可以用小刀揭开,芯片周围的环氧树脂可以用浓硝酸腐蚀掉.热的浓硝酸会溶解掉芯片封装而不会影响芯片及连线.该过程一般在非常干燥的条件下进行,因为水的存在可能会侵蚀已暴露的铝线连接. 接着在超声池里先用丙酮清洗该芯片以除去残余硝酸,然后用清水清洗以除去盐分并干燥.没有超声池,一般就跳过这一步.这种情况下,芯片表面会有点脏,但是不太影响紫外光对芯片的操作效果.最后一步是寻找保护熔丝的位置并将保护熔丝暴露在紫外光下.一般用一台放大倍数至少100倍的显微镜,从编程电压输入脚的连线跟踪进去,来寻找保护熔丝.若没有显微镜,则采用将芯片的不同部分暴露到紫外光

下并观察结果的方式进行简单的搜索.操作时应用不透明的纸片覆盖芯片以保护程序存储器不被紫外光擦除.将保护熔丝暴露在紫外光下5～10分钟就能破坏

掉保护位的保护作用,之后,使用简单的编程器就可直接读出程序存储器的内容. 对于使用了防护层来保护EEPROM单元的单片机来说,使用紫外光复位保护电路是不可行的.对于这种类型的单片机,一般使用微探针技术来读取存储器内容.在芯片封装打开后,将芯片置于显微镜下就能够很容易的找到从存储器连到电路其它部分的数据总线. 由于某种原因,芯片锁定位在编程模式下并不锁定对存储器的访问. 利用这一缺陷将探针放在数据线的上面就能读到所有想要的数据.在编程模式下,重启读过程并连接探针到另外的数据线上就可以读出程序和数据存储器中的所有信息. 还有一种可能的攻击手段是借助显微镜和激光切割机等设备来寻找保护熔丝,从而寻查和这部分电路相联系的所有信号线.由于设计有缺陷, 因此,只要切断从保护熔丝到其它电路的某一根信号线,就能禁止整个保护功能.由于某种原因,这根线离其它的线非常远,所以使用激光切割机完全可以切断这根线而不影响临近线.这样,使用简单的编程器就能直接读出程序存储器的内容. 虽然大多数普通单片机都具有熔丝烧断保护单片机内代码的功能,但由于通用低档的单片机并非定位于制作安全类产品,因此,它们往往没有提供有针对性的防范措施且安全级别较低.加上单片机应用场合广泛,销售量大,厂商间委托加工与技术转让频繁,大量技术资料外泻,使得利用该类芯片的设计漏洞和厂商的测试接口,并通过修改熔丝保护位等侵入型攻击或非侵入型攻击手段来读取单片机的内部程序变得比较容易. 常用单片机芯片简介STC 单片机STC 公司的单片机主要是基于8051 内核,是新一代增强型单片机,指令代码完全兼容传统8051,速度快8~12 倍,带ADC,4 路PWM,双串口,有全球唯一ID 号,加密性好,抗干扰强. PIC 单片机: 单片机: 是MICROCHIP 公司的产品,其突出的特点是体积小,功耗低,精简指令集,抗干扰性好,可靠性高,有较强的模拟接口,代码保密性好,大部分芯片有其兼容的FLASH 程序存储器的芯片.

EMC 单片机: 单片机: 是台湾义隆公司的产品,有很大一部分与PIC 8 位单片机兼容,且相兼容产品的资源相对比PIC 的多,价格便宜,有很多系列可选,但抗干扰较差. ATMEL 单片机单片机(51 单片机: 单片机): ATMEl 公司的8 位单片机有AT89,AT90 两个系列,AT89 系列是8 位Flash 单片机,与8051 系列单片机相兼容,静态时钟模式;AT90 系列单片机是增强RISC 结构,全静态工作方式,内载在线可编程Flash 的单片机,也叫A VR 单片机. PHLIPIS 51PLC 系列单片机系列单片机(51 单片机: 单片机): PHILIPS 公司的单片机是基于80C51 内核的单片机,嵌入了掉电检测,模拟以及片内RC 振荡器等功能,这使51LPC 在高集成度,低成本,低功耗的应用设计中可以满足多方面的性能要求. HOLTEK 单片机: 单片机: 台湾盛扬半导体的单片机,价格便宜,种类较多,但抗干扰较差,适用于消费类产品. TI 公司单片机公司单片机(51 单片机: 单片机): 德州仪器提供了TMS370 和MSP430 两大系列通用单片机.TMS370 系列单片机是8 位CMOS 单片机,具有多种存储模式,多种外围接口模式, 适用于复杂的实时控制场合;MSP430 系列单片机是一种超低功耗,功能集成度较高的16 位低功耗单片机,特别适用于要求功耗低的场合是台湾松翰公司的单片,大多为8 位机,有一部分与PIC 8 位单片机兼容,价格便宜,系统时钟分频可选项较多,有PMW ADC 内振内部杂讯滤波.缺点RAM 空间过小,抗干扰较好.

英文翻译：

From the world of radio in the world to a single chip

Modern computer technology, industrial revolution, the world economy from the capital into the economy to knowledge economy. Field in the electronic world, from the 20th century into the era of radio to computer technology in the 21st century as the center of the intelligent modern era of electronic systems. The basic core of modern electronic systems are embedded computer

systems (referred to as embedded systems), while the microcontroller is the most typical and most extensive and most popular embedded systems.

First, radio has created generations of excellence in the world

Fifties and sixties in the 20th century, the most representative of the advanced electronic technology is wireless technology, including radio broadcasting, radio, wireless communications (telegraph), Amateur Radio, radio positioning, navigation and other telemetry, remote control, remote technology. Early that these electronic technology led many young people into the wonderful digital world, radio show was a wonderful life, the prospects for science and technology. Electronics began to form a new discipline. Radio electronics, wireless communications began e-world journey. Radio technology not only as a representative of advanced science and technology at that time, but also from popular to professional fields of science, attracting the young people and enable them to find a lot of fun. Ore from the bedside to the superheterodyne radio radio; report issued from the radio amateur radio stations; from the telephone, electric bell to the radio control model. Became popular youth radio technology, science and technology education is the most popular and most extensive content. So far, many of the older generation of engineers, experts, Professor of the year are radio enthusiasts. Fun radio technology, radio technology, comprehensive training, from basic principles of electronics, electronic components to the radio-based remote control, telemetry, remote electronic systems, has trained several generations of technological excellence.

Second, from the popularity of the radio era to era of electronic technology

The early radio technology to promote the development of electronic technology, most notably electronic vacuum tube technology to semiconductor electronic

technology. Semiconductor technology to realize the active device miniaturization and low cost, so more popular with radio technology and innovation, and to greatly broaden the number of non-radio-control areas. The development of semiconductor technology lead to the production of integrated circuit, forming the modern electronic technology leap from discrete electronics into the era of era of integrated circuits. Electronic design engineers no longer use the discrete electronic components designed circuit modules, and direct selection of integrated circuit components constitute a single system. They freed the design of the circuit unit dedicated to system design, greatly liberating the productive forces of science and technology, promote the wider spread of electronic systems. Semiconductor integrated circuits in the basic digital logic circuits first breakthrough. A large number of digital logic circuits, such as gates, counters, timers, shift registers, and analog switches, comparators, etc., for the electronic digital control provides excellent conditions for the traditional mechanical control to electronic control. Power electronic devices and sensor technology to make the original to the radio as the center of electronic technology turned to mechanical engineering in the field of digital control systems, testing in the field of information collection, movement of electrical mechanical servo drive control object. Semiconductor and integrated circuit technology will bring us a universal age of electronic technology, wireless technology as the field of electronic technology a part of. 70 years into the 20th century, large scale integrated circuit appeared to promote the conventional electronic circuit unit-specific electronic systems development. Many electronic systems unit into a dedicated integrated devices such as radios, electronic clocks, calculators, electronic engineers in these areas from the circuit, the system designed to debug into the device selection, peripheral device adapter work. Electronic technology, and electronic products enriched, electronic engineers to reduce the

步进电机及单片机英文文献及翻译

外文文献： Knowledge of the stepper motor What is a stepper motor： Stepper motor is a kind of electrical pulses into angular displacement of the implementing agency. Popular little lesson: When the driver receives a step pulse signal, it will drive a stepper motor to set the direction of rotation at a fixed angle (and the step angle). You can control the number of pulses to control the angular displacement, so as to achieve accurate positioning purposes; the same time you can control the pulse frequency to control the motor rotation speed and acceleration, to achieve speed control purposes. What kinds of stepper motor sub-： In three stepper motors: permanent magnet (PM), reactive (VR) and hybrid (HB) permanent magnet stepper usually two-phase, torque, and smaller, step angle of 7.5 degrees or the general 15 degrees; reaction step is generally three-phase, can achieve high torque output, step angle of 1.5 degrees is generally, but the noise and vibration are large. 80 countries in Europe and America have been eliminated; hybrid stepper is a mix of permanent magnet and reactive advantages. It consists of two phases and the five-phase: two-phase step angle of 1.8 degrees while the general five-phase step angle of 0.72 degrees generally. The most widely used Stepper Motor. What is to keep the torque (HOLDING TORQUE) How much precision stepper motor? Whether the cumulative： The general accuracy of the stepper motor step angle of 3-5%, and not cumulative.

概率论毕业论文外文翻译

Statistical hypothesis testing Adriana Albu，Loredana Ungureanu Politehnica University Timisoara,adrianaa@aut.utt.ro Politehnica University Timisoara,loredanau@aut.utt.ro Abstract In this article,we present a Bayesian statistical hypothesis testing inspection, testing theory and the process Mentioned hypothesis testing in the real world and the importance of, and successful test of the Notes. Key words Bayesian hypothesis testing; Bayesian inference;Test of significance Introduction A statistical hypothesis test is a method of making decisions using data, whether from a controlled experiment or an observational study (not controlled). In statistics, a result is called statistically significant if it is unlikely to have occurred by chance alone, according to a pre-determined threshold probability, the significance level. The phrase "test of significance" was coined by Ronald Fisher: "Critical tests of this kind may be called tests of significance, and when such tests are available we may discover whether a second sample is or is not significantly different from the first."[1] Hypothesis testing is sometimes called confirmatory data analysis, in contrast to exploratory data analysis. In frequency probability,these decisions are almost always made using null-hypothesis tests. These are tests that answer the question Assuming that the null hypothesis is true, what is the probability of observing a value for the test statistic that is at [] least as extreme as the value that was actually observed?) 2 More formally, they represent answers to the question, posed before undertaking an experiment,of what outcomes of the experiment would lead to rejection of the null hypothesis for a pre-specified probability of an incorrect rejection. One use of hypothesis testing is deciding whether experimental results contain enough information to cast doubt on conventional wisdom. Statistical hypothesis testing is a key technique of frequentist statistical inference. The Bayesian approach to hypothesis testing is to base rejection of the hypothesis on the posterior probability.[3][4]Other approaches to reaching a decision based on data are available via decision theory and optimal decisions. The critical region of a hypothesis test is the set of all outcomes which cause the null hypothesis to be rejected in favor of the alternative hypothesis. The critical region is usually denoted by the letter C. One-sample tests are appropriate when a sample is being compared to the population from a hypothesis. The population characteristics are known from theory or are calculated from the population.

毕业论文英文参考文献与译文

Inventory management Inventory Control On the so-called "inventory control", many people will interpret it as a "storage management", which is actually a big distortion. The traditional narrow view, mainly for warehouse inventory control of materials for inventory, data processing, storage, distribution, etc., through the implementation of anti-corrosion, temperature and humidity control means, to make the custody of the physical inventory to maintain optimum purposes. This is just a form of inventory control, or can be defined as the physical inventory control. How, then, from a broad perspective to understand inventory control? Inventory control should be related to the company's financial and operational objectives, in particular operating cash flow by optimizing the entire demand and supply chain management processes (DSCM), a reasonable set of ERP control strategy, and supported by appropriate information processing tools, tools to achieved in ensuring the timely delivery of the premise, as far as possible to reduce inventory levels, reducing inventory and obsolescence, the risk of devaluation. In this sense, the physical inventory control to achieve financial goals is just a means to control the entire inventory or just a necessary part; from the perspective of organizational functions, physical inventory control, warehouse management is mainly the responsibility of The broad inventory control is the demand and supply chain management, and the whole company's responsibility. Why until now many people's understanding of inventory control, limited physical inventory control? The following two reasons can not be ignored: First, our enterprises do not attach importance to inventory control. Especially those who benefit relatively good business, as long as there is money on the few people to consider the problem of inventory turnover. Inventory control is simply interpreted as warehouse management, unless the time to spend money, it may have been to see the inventory problem, and see the results are often very simple procurement to buy more, or did not do warehouse departments . Second, ERP misleading. Invoicing software is simple audacity to call it ERP, companies on their so-called ERP can reduce the number of inventory, inventory control, seems to rely on their small software can get. Even as SAP, BAAN ERP world, the field of

毕业论文外文翻译模版

吉林化工学院理学院 毕业论文外文翻译English Title（Times New Roman ，三号） 学生学号：08810219 学生姓名：袁庚文 专业班级：信息与计算科学0802 指导教师：赵瑛 职称副教授 起止日期：2012.2.27～2012.3.14 吉林化工学院 Jilin Institute of Chemical Technology

1 外文翻译的基本内容 应选择与本课题密切相关的外文文献（学术期刊网上的），译成中文，与原文装订在一起并独立成册。在毕业答辩前，同论文一起上交。译文字数不应少于3000个汉字。 2 书写规范 2.1 外文翻译的正文格式 正文版心设置为：上边距：3.5厘米，下边距：2.5厘米，左边距：3.5厘米，右边距：2厘米，页眉：2.5厘米，页脚：2厘米。 中文部分正文选用模板中的样式所定义的“正文”，每段落首行缩进2字；或者手动设置成每段落首行缩进2字，字体：宋体，字号：小四，行距：多倍行距1.3，间距：前段、后段均为0行。 这部分工作模板中已经自动设置为缺省值。 2.2标题格式 特别注意：各级标题的具体形式可参照外文原文确定。 1．第一级标题（如：第1章绪论）选用模板中的样式所定义的“标题1”，居左；或者手动设置成字体：黑体，居左，字号：三号，1.5倍行距，段后11磅，段前为11磅。 2．第二级标题（如：1.2 摘要与关键词）选用模板中的样式所定义的“标题2”，居左；或者手动设置成字体：黑体，居左，字号：四号，1.5倍行距，段后为0，段前0.5行。 3．第三级标题（如：1.2.1 摘要）选用模板中的样式所定义的“标题3”，居左；或者手动设置成字体：黑体，居左，字号：小四，1.5倍行距，段后为0，段前0.5行。 标题和后面文字之间空一格（半角）。 3 图表及公式等的格式说明 图表、公式、参考文献等的格式详见《吉林化工学院本科学生毕业设计说明书（论文）撰写规范及标准模版》中相关的说明。

单片机方面毕业设计外文文献翻译

单片机方面毕业设计外文文献翻译

中文译文 单片机 单片机也被称为微控制器（Microcontroller Unit），常见英文字母的缩写MCU表示单片机，它最早是被用在工业控制领域。单片机由芯片内仅有CPU的专用处理器发展而来。最早的设计理念是经过将大量外围设备和CPU集成在一个芯片中，使计算机系统更小，更容易集成进复杂的而对体积要求严格的控制设备当中。INTEL的Z80是最早按照这种思想设计出的处理器，从此以后，单片机和专用处理器的发展便分道扬镳。 早期的单片机都是8位或4位的。其中最成功的是INTEL 的8031，因为简单可靠而性能不错获得了很大的好评。此后在8031上发展出了MCS51系列单片机系统。基于这一系统的单片机系统直到现在还在广泛使用。随着工业控制领域要求的提高，开始出现了16位单片机，但因为性价比不理想并未得到很广泛的应用。90年代后随着消费电子产品大发展，单片机技术得到了巨大提高。随着INTEL i960系列特别是后来的ARM系列的广泛应用，32位单片机迅速取代16位单片机的高端地位，而且进入主流市场。而传统的8位单片机的性能也得到了飞速提高，处理能力比起80年代提高了数百倍。当前，高端的32位单片机主频已经超过300MHz，性能直追90年代中期的专用处理器，而普通的型号出厂价格跌落至1美元，最高端[1]的型号也只有10美元。当代单片机系统已经不再只在裸机环境下开发和

使用，大量专用的嵌入式操作系统被广泛应用在全系列的单片机上。而在作为掌上电脑和手机核心处理的高端单片机甚至能够直接使用专用的Windows和Linux操作系统。 单片机比专用处理器更适合应用于嵌入式系统，因此它得到了最多的应用。事实上单片机是世界上数量最多的计算机。现代人类生活中所用的几乎每件电子和机械产品中都会集成有单片机。手机、电话、计算器、家用电器、电子玩具、掌上电脑以及鼠标等电脑配件中都配有1-2部单片机。而个人电脑中也会有为数不少的单片机在工作。汽车上一般配备40多部单片机，复杂的工业控制系统上甚至可能有数百台单片机在同时工作！单片机的数量不但远超过PC机和其它计算的总和，甚至比人类的数量还要多。 单片机又称单片微控制器,它不是完成某一个逻辑功能的芯片,而是把一个计算机系统集成到一个芯片上。相当于一个微型的计算机，和计算机相比，单片机只缺少了I/O设备。概括的讲：一块芯片就成了一台计算机。它的体积小、质量轻、价格便宜、为学习、应用和开发提供了便利条件。同时，学习使用单片机是了解计算机原理与结构的最佳选择。 单片机内部也用和电脑功能类似的模块，比如CPU，内存，并行总线，还有和硬盘作用相同的存储器件，不同的是它的这些部件性能都相对我们的家用电脑弱很多，不过价钱也是低的，一般不超过10元即可......用它来做一些控制电器一类不

大学毕业论文---软件专业外文文献中英文翻译

软件专业毕业论文外文文献中英文翻译 Object landscapes and lifetimes Tech nically, OOP is just about abstract data typing, in herita nee, and polymorphism, but other issues can be at least as importa nt. The rema in der of this sect ion will cover these issues. One of the most importa nt factors is the way objects are created and destroyed. Where is the data for an object and how is the lifetime of the object con trolled? There are differe nt philosophies at work here. C++ takes the approach that con trol of efficie ncy is the most importa nt issue, so it gives the programmer a choice. For maximum run-time speed, the storage and lifetime can be determined while the program is being written, by placing the objects on the stack (these are sometimes called automatic or scoped variables) or in the static storage area. This places a priority on the speed of storage allocatio n and release, and con trol of these can be very valuable in some situati ons. However, you sacrifice flexibility because you must know the exact qua ntity, lifetime, and type of objects while you're writing the program. If you are trying to solve a more general problem such as computer-aided desig n, warehouse man ageme nt, or air-traffic con trol, this is too restrictive. The sec ond approach is to create objects dyn amically in a pool of memory called the heap. In this approach, you don't know un til run-time how many objects you n eed, what their lifetime is, or what their exact type is. Those are determined at the spur of the moment while the program is runnin g. If you n eed a new object, you simply make it on the heap at the point that you n eed it. Because the storage is man aged dyn amically, at run-time, the amount of time required to allocate storage on the heap is sig ni fica ntly Ion ger tha n the time to create storage on the stack. (Creat ing storage on the stack is ofte n a si ngle assembly in structio n to move the stack poin ter dow n, and ano ther to move it back up.) The dyn amic approach makes the gen erally logical assumpti on that objects tend to be complicated, so the extra overhead of finding storage and releas ing that storage will not have an importa nt impact on the creati on of an object .In additi on, the greater flexibility is esse ntial to solve the gen eral program ming problem. Java uses the sec ond approach, exclusive". Every time you want to create an object, you use the new keyword to build a dyn amic in sta nee of that object. There's ano ther issue, however, and that's the lifetime of an object. With Ian guages that allow objects to be created on the stack, the compiler determines how long the object lasts and can automatically destroy it. However, if you create it on the heap the compiler has no kno wledge of its lifetime. In a Ianguage like C++, you must determine programmatically when to destroy the

at89c52单片机中英文资料对照外文翻译文献综述

at89c52单片机简介 中英文资料对照外文翻译文献综述 A T89C52 Single-chip microprocessor introduction Selection of Single-chip microprocessor 1. Development of Single-chip microprocessor The main component part of Single-chip microprocessor as a result of by such centralize to be living to obtain on the chip，In immediate future middle processor CPU。Storage RAM immediately﹑memoy read ROM﹑Interrupt system、Timer /'s counter along with I/O's rim electric circuit awaits the main microcomputer section，The lumping is living on the chip。Although the Single-chip microprocessor r is only a chip，Yet through makes up and the meritorous service be able to on sees，It had haveed the calculating machine system property，calling it for this reason act as Single-chip microprocessor r minisize calculating machine SCMS and abbreviate the Single-chip microprocessor。 1976Year the Inter corporation put out 8 MCS－48Set Single-chip microprocessor computer，After being living more than 20 years time in development that obtain continuously and wide-ranging application。1980Year that corporation put out high performance MCS －51Set Single-chip microprocessor。This type of Single-chip microprocessor meritorous service capacity、The addressing range wholly than early phase lift somewhat，Use also comparatively far more at the moment。1982Year that corporation put out the taller 16 Single-chip microprocessor MCS of performance once

毕业论文 外文翻译#(精选.)

毕业论文（设计）外文翻译 题目：中国上市公司偏好股权融资：非制度性因素 系部名称：经济管理系专业班级:会计082班 学生姓名：任民学号： 200880444228 指导教师：冯银波教师职称:讲师 年月日

译文： 中国上市公司偏好股权融资：非制度性因素 国际商业管理杂志 2009.10 摘要：本文把重点集中于中国上市公司的融资活动，运用西方融资理论，从非制度性因素方面，如融资成本、企业资产类型和质量、盈利能力、行业因素、股权结构因素、财务管理水平和社会文化，分析了中国上市公司倾向于股权融资的原因，并得出结论，股权融资偏好是上市公司根据中国融资环境的一种合理的选择。最后，针对公司的股权融资偏好提出了一些简明的建议。 关键词：股权融资，非制度性因素，融资成本 一、前言 中国上市公司偏好于股权融资，根据中国证券报的数据显示，1997年上市公司在资本市场的融资金额为95.87亿美元，其中股票融资的比例是72.5％，，在1998年和1999年比例分别为72.6％和72.3％，另一方面，债券融资的比例分别是17.8％，24.9％和25.1％。在这三年，股票融资的比例，在比中国发达的资本市场中却在下跌。以美国为例，当美国企业需要的资金在资本市场上，于股权融资相比他们宁愿选择债券融资。统计数据显示，从1970年到1985年，美日企业债券融资占了境外融资的91.7％，比股权融资高很多。阎达五等发现，大约中国3/4的上市公司偏好于股权融资。许多研究的学者认为，上市公司按以下顺序进行外部融资：第一个是股票基金，第二个是可转换债券，三是短期债务，最后一个是长期负债。许多研究人员通常分析我国上市公司偏好股权是由于我们国家的经济改革所带来的制度性因素。他们认为，上市公司的融资活动违背了西方古典融资理论只是因为那些制度性原因。例如，优序融资理论认为，当企业需要资金时，他们首先应该转向内部资金（折旧和留存收益），然后再进行债权融资，最后的选择是股票融资。在这篇文章中，笔者认为，这是因为具体的金融环境激活了企业的这种偏好，并结合了非制度性因素和西方金融理论，尝试解释股权融资偏好的原因。

java毕业论文外文文献翻译

Advantages of Managed Code Microsoft intermediate language shares with Java byte code the idea that it is a low-level language witha simple syntax , which can be very quickly translated intonative machine code. Having this well-defined universal syntax for code has significant advantages. Platform independence First, it means that the same file containing byte code instructions can be placed on any platform; atruntime the final stage of compilation can then be easily accomplished so that the code will run on thatparticular platform. In other words, by compiling to IL we obtain platform independence for .NET, inmuch the same way as compiling to Java byte code gives Java platform independence. Performance improvement IL is actually a bit more ambitious than Java bytecode. IL is always Just-In-Time compiled (known as JIT), whereas Java byte code was ofteninterpreted. One of the disadvantages of Java was that, on execution, the process of translating from Javabyte code to native executable resulted in a loss of performance. Instead of compiling the entire application in one go (which could lead to a slow start-up time), the JITcompiler simply compiles each portion of code as it is called (just-in-time). When code has been compiled.once, the resultant native executable is stored until the application exits, so that it does not need to berecompiled the next time that portion of code is run. Microsoft argues that this process is more efficientthan compiling the entire application code at the start, because of the likelihood that large portions of anyapplication code will not actually be executed in any given run. Using the JIT compiler, such code willnever be compiled.

单片机_英文参考文献

Structure and function of the MCS-51 series Structure and function of the MCS-51 series one-chip computer MCS-51 is a name of a piece of one-chip computer series which Intel Company produces. This company introduced 8 top-grade one-chip computers of MCS-51 series in 1980 after introducing 8 one-chip computers of MCS-48 series in 1976. It belong to a lot of kinds this line of one-chip computer the chips have,such as 8051, 8031, 8751, 80C51BH, 80C31BH,etc., their basic composition, basic performance and instruction system are all the same. 8051 daily representatives- 51 serial one-chip computers . An one-chip computer system is made up of several following parts: ( 1) One microprocessor of 8 (CPU). ( 2) At slice data memory RAM (128B/256B),it use not depositting not can reading /data that write, such as result not middle of operation, final result and data wanted to show, etc. ( 3) Procedure memory ROM/EPROM (4KB/8KB ), is used to preserve the procedure , some initial data and form in slice. But does not take ROM/EPROM within some one-chip computers, such as 8031 , 8032, 80C ,etc.. ( 4) Four 8 run side by side I/O interface P0 four P3, each mouth can use as introduction , may use as exporting too. ( 5) Two timer / counter, each timer / counter may set up and count in the way, used to count to the external incident, can set up into a timing way too, and can according to count or result of timing realize the control of the computer. ( 6) Five cut off cutting off the control system of the source . ( 7) One all duplexing serial I/O mouth of UART (universal asynchronous receiver/transmitter (UART) ), is it realize one-chip computer or one-chip computer and serial communication of computer to use for. ( 8) Stretch oscillator and clock produce circuit, quartz crystal finely tune electric capacity need outer. Allow oscillation frequency as 12 megahertas now at most. Every the above-mentioned part was joined through the inside data bus .Among them, CPU is a core of the one-chip computer, it is the control of the computer and command centre, made up of such parts as arithmetic unit and controller , etc.. The arithmetic unit can carry on 8 persons of arithmetic operation and unit ALU of logic operation while including one, the 1 storing device temporarilies of 8, storing device 2 temporarily, 8's accumulation

MCS_51系列单片机中英文资料对照外文翻译文献综述

MCS-51系列单片机 中英文资料对照外文翻译文献综述 Structure and function of the MCS-51 series Structure and function of the MCS-51 series one-chip computer MCS-51 is a name of a piece of one-chip computer series which Intel Company produces. This company introduced 8 top-grade one-chip computers of MCS-51 series in 1980 after introducing 8 one-chip computers of MCS-48 series in 1976. It belong to a lot of kinds this line of one-chip computer the chips have, such as 8051, 8031, 8751, 80C51BH, 80C31BH,etc., their basic composition, basic performance and instruction system are all the same.8051 daily representatives-51 serial one-chip computers. A one-chip computer system is made up of several following parts: (1) One microprocessor of 8 (CPU). ( 2) At slice data memory RAM (128B/256B),it use not depositing not can reading /data that write, such as result not middle of operation, final result and data wanted to show, etc. (3) Procedure memory ROM/EPROM (4KB/8K B ), is used to preserve the