当前位置：搜档网 › 国际会议口头报告演讲内容准备模板.docx

国际会议口头报告演讲内容准备模板.docx

T h e D r a f t o f A c a d e m i c P r e s e n t a t i o n 国际会议的口头报告模板，每页ppt你需要讲什么东西需要分页详细写，尽量口语化，如下是本人参加比利时会议的模板，供大家参考。

开场白：

I am so honored to be with you to communicate academic questions and ideas.

The tile of my academic presentation is “The preparation and catalytic performance of porous silica nanotube functioned with heteroatoms”

I shall only take ten minutes of your time.

I will talk about the topic on the preparation of porous materials. P2

First of all, i wanna introduce myself. I come from nanjing university of technology, nanjing city, china.

The content is listed as follows.

All our researches are conducted by the academic thoughts. Generally speaking, we are committed to porous materials. In order to explore high-performance functionalized materials for Pilot?experiments and scale-up?production; we tune the structure, such as composition and

谢谢你的观赏morphology step by step and optimize them further. What’s more, the possible synthesis mechanisms are also investigated. Today, the presentation is based on the right-hand branch.

It is known that mesoporous silica have excellent characters as the catalyst carrier, such as……..

But due to lack of active sites, we have to introduce organic or inorganic species as active sites. And the catalytic performance need to be further improved.

As we know, the three factors including activity, scale and diffusion factor play decisive role in the catalysis, affecting the yield, selectivity, stability strongly. In our presentation, we mainly focus on the influence of scale factor on the catalysis.

Due to lack of active sites for mesoporous silica, two main methods (surface loading, modified framework) are widely reported, by which various organic or inorganic active sites can be immobilized on the surface or incorporated into the framework of mesopoous silica.

Though various morphologies of mesoporos silica were widely 谢谢你的观赏

国际会议论文摘要post样版

on Agriculture and Environment 2012 1 Yuji KAMIYA RIKEN Plant Science Center Abstract:The phytohormone auxin plays critical roles in the regulation of plant growth and development. Indole-3-acetic acid (IAA) has been recognized as the major auxin for more than 70 years. Although several pathways have been proposed, how auxin is synthesized in plants is still unclear. Previous genetic and enzymatic studies demonstrated that both TRYPTOPHAN AMINOTRANSFERASE OF ARABIDOPSIS (TAA) and YUCCA (YUC) flavin monooxygenase-like proteins are required for biosynthesis of IAA during plant de- velopment, but these enzymes were placed in two independent pathways. Recently, we demonstrate that the TAA family produces indole-3-pyruvic acid (IPA) and the YUC family functions in the conversion of IPA to IAA in Arabidopsis (Arabidopsis thaliana) by a quantification method of IPA using liquid chromatography–electrospray ionization–tandem MS. We further show that YUC protein expressed in Escherichia coli shows faint yellow color suggesting the presence of FMD and directly converts IPA to IAA. Indole-3-acetaldehyde is probably not a precursor of IAA in the IPA pathway. Our results indicate that YUC proteins catalyze a rate-limiting step of the IPA pathway, which is the main IAA biosynthesis pathway in Arabidopsis. Although 2,4-D and other synthetic auxins were used in agriculture to increase crop production, specific inhibitors and promoters of IAA biosynthesis were not well studied. Our identification of the two specific enzymes for IAA biosynthesis may give us new approach to increase crop production by regulating auxin biosynthesis. Yuji Kamiya is a Group Director of the RIKEN Plant Science Center. He received Degree in agricultural chemistry from the University of Tokyo in 1975. He joined the Pesticide Synthesis Laboratory at RIKEN in 1975. From 1980 to 1982 he studied on gibberellins biosynthesis at the Institute of Plant Physiology, University of G?ttingen, as an Alexander von Humboldt Fellow. Since that time on he has continued to study gibberellins biosynthesis and its regulation. He was appointed as the Head of the Laboratory for Plant Hormone Function of the RIKEN Frontier Research Program from 1991 to 1998. In 2000, he joined the Plant Science Center as the Head of the Laboratory of Cellular Growth Development and in October 2000 he was promoted to the position of Group Director. Main Activities: Research on regulation of plant hormone biosynthesis Cloning and characterization of enzymes involved in hormone biosynthesis Screening of chemical proves to increase plant biomass production.

国际会议作报告英语发言稿

国际会议作报告英语发言稿 Prepared on 22 November 2020

Thankyou,prof.….Mynameis…..I’m from…..Iamverypleasedtobeheret ojointhisforum.Thetopic,themainpartsofmyresearchareaboutsoilpavement. Mypresentationwillincludethesefourparts: First,somebackgroundinformationaboutthisresearch;second,themainwork wehavedone;third,someconclusionswehavegotandthelast:innovationandpr esentationofourpublishedpapers. WhyIchoosethisitem,theexistingquantityofairfieldsisstillnotsufficientand theairfieldshavemanyshortcomingsespeciallyinwartime.Second,thecomple mentaryfacilities,suchashighwayrunwaysarefarlessthanairfields,however,, ,thefieldairfieldcanfillthevoidofairfieldandtheycanbecombinedtobeairfield network. ,convenientandvalidity,fastmeansthefieldairfieldmustbeconstructedasfasta spossible,convenientmeanstheconstructionshouldneedtheminimumequip ment,laborandmaterialsconsideringtheactualconstructioncondition,validit ymeanstheconstructedairfieldisabletosupporttheoperationofgivenaircraftin specificallytime. Justlikemanyotherterritories,

会议论文模板

附件1 会议论文模板会议论文 1、论文征稿范围（1）肉品科学基础；（2）肉品药物残留分析技术；（3）肉类生产可追溯体系及保障技术；（4）肉品清洁生产、保鲜及贮运技术；（5）肉品安全法律、法规、标准；（6）传统肉制品加工、现代化装备与质量控制技术；（7）肉品加工副产物综合利用；（8）肉品加工机械、包装新技术；（9）肉品分级、品质检验、风味分析；（10）肉品添加剂开发与应用；（11）肉品营养与人类健康；（12）肉品工业发展政策与新举措；（13）基因与肉类品质；（14）饲养与肉类品质。 2、论文格式与要求（1）论文内容未公开发表或未投稿，一般不接受综述文章；（2）具体撰写格式请参照以下“投稿论文模板”；（3）论文一般不超过6页；（4）9月15日前发送至会务组邮箱（meatacsy@https://www.sodocs.net/doc/c610004195.html,）。

投稿论文模板模板使用方法： 1.在Windows操作系统中，直接双击本模板文件，作者可以输入稿件。如果作者想将稿件直接输入模板中，请选中你想代替的文字，然后开始输入稿件内容(例如，选中“标题” 部分输入你自己的标题)。 2.投稿时请使用通栏，不必分两栏，分栏工作由排版人员完成。 3. 如果已有稿件Word文档，则可以拷贝、粘贴稿件内容到本模板。 4. 请确认稿件内容格式无误后，删除所有不需要的部分，包括说明部分（红色字体部分）和修改痕迹。 5. 保存文件：选择“文件→另存为”为Word文档文件(.doc)。总则： 1. 文中所有的中文都使用“宋体”字体；所有的英文和数字都使用“Times New Roman”字体，包括标题、图、表、参考文献等。 2. 中英文表述中，数值和单位之间间隔1/4中文字宽度的空格。题目宋体小一、居中、加粗、无缩略语第一作者姓名1，作者二姓名2，通信作者姓名1,* (宋，10.5号，如果第一作者不是联系人，请在通信联系人右上角标注*；两个字的作者名字间空一格；外籍作者用英文全名，不能缩写，并尊重该国姓名表达习惯，少数民族作者姓名按其民族习惯著录姓名。不同工作单位的作者姓名右上角加注数字序号。如果所有的作者都在同一个单位，则不需对作者编号。） (1.作者单位正式对外名称，省份城市邮编；2.作者单位正式对外名称，省份城市邮编)宋体9号（作者的工作单位，均应包括单位全称(大学原则上标注到具体的学院)、所在省市名及邮政编码，单位名称与省市之间应以逗号“，”分隔，整个单位信息项用圆括号“( )”括起。多作者的工作单位名称之前加与作者姓名序号相同的数字序号，单位编号应按在文中的出现顺序依次排号，各工作单位之间连排时以分号“；”分隔。）摘要：宋体9号，摘要中首次出现的英文缩写名，不能直接用英文缩写形式，需用“中文名(英文全名，点击03版WORD的“插入”或07版WORD的“引用”工具，用其中的“插入脚注”按钮插入短横线。以下字体为9号、中文宋体，英文、数字用“Times New Roman”字体。基金项目指文章产出的资助背景，项目名称应按国家有关部门规定的正式名称填写；多项基金项目应依次列出，其间分号“；”分隔。项目后给出编号，编号用()括起。例：基金项目：国家自然科学基金青年科学基金项目(30471225)；“十二五”国家科技支撑计划项目(项目编号)；国家高技术研究发展计划（863计划）项目(项目编号) 作者简介：姓名(出生年—)，性别，职称(如果有)，学位或学历(尽量写学位)，研究方向为×××。E-mail：×××(只标注一个常用的电子邮箱) *通信作者：姓名(出生年—)，性别，职称(如果有)，学位或学历(尽量写学位)，研究方向为×××。E-mail：×××(只标注一个常用的电子邮箱) 只刊登一位第一作者、通信作者(如果有通信作者)简介。

国际会议作报告英语发言稿

国际会议作报告英语发言稿精选文档 TTMS system office room 【TTMS16H-TTMS2A-TTMS8Q8-

Thank you,prof. …. My nameis ….. I’m from …..I amvery pleased to be here to join this forum.The topicof my presentation is properties of rapid construction materials for soil pavement of field airfield. As is shown in the picture, the main parts of my research are about soil pavement. My presentation will include these four parts: First, some background information about this research; second, the main work we have done; third, some conclusions we have got and the last: innovation and presentation of our published papers. Why I choose this item I think it can be illustrated from the following four parts. First, the existing quantity of airfields is still not sufficient and the airfields have many shortcomings especially in war time. Second, the complementary facilities, such as highway runways are far less than airfields, however, have more weakness. Third, a certain amount of field airfield is quite necessary considering some emergencies such as rescue and disaster relief. Forth, the field airfield can fill the void of airfield and they can be combined to be airfield network. The meaning and aim of this research contains three parts. Fast, convenient and validity, fast means the field airfield must be constructed as fast as possible, convenient means the construction should need the

在国际会议上做好口头报告的必备环节

在国际会议上做好口头报告的必备环节(question time) 如果你的论文在国际会议上发表，你又做 oral presentation, 那么如何回答问题也是需要技巧的。一会高质量的会议还是有些牛人云集的，口头报告既可以让别人有机会认识你，探讨一些学术问题，也有利于认识牛人呀：）所以在这整理了如何完美的完成question time，希望对大家有帮助：） Question time 几点简要事项： ※Welcome the question ※Listen carefully to the question---don’t interrupt ※Take time to think before you answer ※Check you have understood the question---rephrase or clarify if necessary ※Reply positively---be brief and clear ※Accept criticism positively ※After your answer, check that the questioner is satisfied 如果遇到了以下的情形，看看如何来Handling it 1. Instead of asking a question, the person strongly, rather angrily, disagrees with your point of view. ――――对于这种情况你就先礼貌地听他讲完，然后重述一下你的观点，如果有必要，重述时加上点佐证。如果这人还是不依不扰，you can say, “Well, we’ll have to agree to disagree on this point,” or “ Unfortunately, there’s no time to go into this more deeply right now.” 2. Instead of asking a question, the person states his or her own viewpoints that agree with yours. You can say, “ Yes, that fits in exactly with what I was saying”. 3. The person states positively that some information you have given is inaccurate, but you are absolutely sure that you are correct. 这里，你可以提供你的information source or provide additional support for your statement. OR YOU CAN SAY, “ I believe that my information is correct, but I will certainly recheck my facts.” 4. 如果有人直接提出你的一些information is inaccurate, 而你又不能自己的information was correct or not. ―――Do not feel threatened or regard this as an attack. YOU CAN SAY, “ I appreciate your bringing this to my attention. I’ll have to recheck my sources to see what is correct.” 5. 如果有人问的问题is so basic, 你发现他did not understand any of your presentation.

EI国际会议模板(TTP)

Your Paper's Title Starts Here: Please Center Sanfeng Zhang1, a, Hulan Liu2, b and Dada Xi2, c 1School of xxx, xxx University, Guangzhou 510000, China; 2School of yyy, zzz University, Guangzhou 510000, China. a zzz@https://www.sodocs.net/doc/c610004195.html,, b xxx@https://www.sodocs.net/doc/c610004195.html,, c yyyy@https://www.sodocs.net/doc/c610004195.html, Keywords: List the, keywords covered, in your paper. Abstract. This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in). This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in). Introduction All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper. Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. Should authors use tables or figures from other Publications, they must ask the corresponding publishers to grant them the right to publish this material in their paper. Use italic for emphasizing a word or phrase. Do not uses boldface typing or capital letters except for section headings (cf. remarks on section headings, below). Do not number your paper: All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper. Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. Organization of the Text Section Headings. The section headings are in boldface capital and lowercase letters. Second level headings are typed as part of the succeeding paragraph (like the subsection heading of this paragraph). All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper. Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. When receiving the paper, we assume that the corresponding authors grant us the copyright to use. Page Numbers. Do not number your paper: All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper. Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. Should authors use tables or figures from other Publications, they must ask the corresponding publishers to grant them the right to publish this material in their paper. Use italic for emphasizing a word or phrase. Do not use boldface typing or capital letters except for section headings (cf. remarks on section headings, below). c2 = a2 + b2. (1)

英文国际会议演讲稿范文

英文国际会议演讲稿范文英文会议演讲稿篇一：英文国际学术会议开幕词演讲稿 Distinguished guests, distinguished delegates, ladies and gentlemen, and all the friends: At this special time of wonderful August, With a pleasant subtropical climate in Xiamen, Our respectable guests are here getting together , undertaken by XMU , the 2014 10th International Conference on Natural Computation and the 2014 11th International Conference on Fuzzy Systems and Knowledge Discovery , will be open. Now, First of all, please allow me to give our hearty welcome to all of you present, and thank you , for your friendly coming. We feel so proud, and appreciated as well to be the host of the event. It is a great honor for us to have all you here to attend this conference, of which the theme is the academic exchange about the advanced technologies on Computer Science. Here I’d be delighted to introduce our conventioneers in brief. Apart from

国际会议论文格式要求

国际会议论文格式要求： Author Guidelines for 8.5 x 11-inch Proceedings Manuscripts Author(s) Name(s) Author Affiliation(s) E-mail Abstract The abstract is to be in fully-justified italicized text, at the top of the left-hand column as it is here, below the auth or information. Use the word “Abstract” as the title, in 12-point Times, boldface type, centered relative to the column, initially capitalized. The abstract is to be in 10-point, single-spaced type, and up to 150 words in length. Leave two blank lines after the abstract, then begin the main text. 1. Introduction All manuscripts must be in English. These guidelines include complete descriptions of the fonts, spacing, and related information for producing your proceedings manuscripts. Please follow them and if you have any questions, direct them to the production editor in charge of your proceedings at the IEEE Computer Society Press: Phone (714) 821-8380 or Fax (714) 761-1784. 2. Formatting your paper All printed material, including text, illustrations, and charts, must be kept within a print area of 6-1/2 inches (16.51 cm) wide by 8-7/8 inches (22.51 cm) high. Do not write or print anything outside the print area. All text must be in a two-column format. Columns are to be 3-1/16 inches (7.85 cm) wide, with a 3/8 inch (0.81 cm) space between them. Text must be fully justified. A format sheet with the margins and placement guides is available as both Word and PDF files as and . It contains lines and boxes showing the margins and print areas. If you hold it and your printed page up to the light, you can easily check your margins to see if your print area fits within the space allowed. 3. Main title The main title (on the first page) should begin 1-3/8 inches (3.49 cm) from the top edge of the page, centered, and in Times 14-point, boldface type. Capitalize the first letter of nouns, pronouns, verbs, adjectives, and adverbs; do not capitalize articles, coordinate conjunctions, or prepositions (unless the title begins with such a word). Leave two 12-point blank lines after the title. 4. Author name(s) and affiliation(s) Author names and affiliations are to be centered beneath the title and printed in Times 12-point, non-boldface type. Multiple authors may be shown in a two- or three-column format, with their affiliations italicized and centered below their respective names. Include e-mail addresses if possible. Author information should be followed by two 12-point blank lines. 5. Second and following pages The second and following pages should begin 1.0 inch (2.54 cm) from the top edge. On all pages, the bottom margin should be 1-1/8 inches (2.86 cm) from the bottom edge of the page for 8.5 x 11-inch paper; for A4 paper, approximately 1-5/8 inches (4.13 cm) from the bottom edge of the page. 6. Type-style and fonts Wherever Times is specified, Times Roman or Times New Roman may be used. If neither is available on your word processor, please use the font closest in

国际会议发言稿英文(精选多篇)

国际会议发言稿英文(精选多篇) 第一篇：国际会议--英文表示欢迎：good morning, ladies and gentlemen, i’m privileged to welcome you all to “the current status and future development of cotton machinery” conference. 自我介绍：let me introduce myself i am dr lifrom beijing, china, and i am going to be the chair for this morning’s session. 介绍议题： this conference will focus on the discussion of the various aspects of cotton machinery. it includes the application of cotton machinery and the current status.and we will also discuss the prospect of cotton machinery. 介绍报告人： now it gives me great pleasure to introduce today’sparticipants. they are :han dan, the director general of the united nations industrial development organization(联合国工业发展组织总干事) zhang hui, president of china power investment group company. shang fengjiao, professor of physics ,head of american nuclear energy association. now, we welcome the opening of han dan do for us（现在，我们欢迎aa 为我们做致开幕词） aa上台

2014年加拿大会议-国际会议口头报告讲稿

(虽然短短5页，这可是本主一个多月的工作结晶，往对大家有帮助，别忘了给赞) P1 Greeting: Thanks for introduction. Hello everyone. Wellcome to my talk. Thank the organisers for giving me this opportunity. Self-introduction: My name is [your name] a phd student at group of Prof. [your advisor] who is sitting there. We come from [your University], China. As you know, nanjing is a city with a long history which locates in the south-east of China. Subject: Today, I’m going to talk about our recent work about [your title]. P2 Outline: My presentation is divided into four parts: Background; Morphology control; Catalysis & Drug-delivery; Summary. P3 （Introduction of the background）In the past, numerous researches have been done focusing on micro- and macro-scale. But, there is a central issue, how the understanding at the micro-scale can enable predictions of functional behavior at the macro-scale.Then, a new awareness, also an open concept ‘mesoscale science’has recently emerged to link the micro- to the macroscale. It is clear that porous materials have great potential due to their various composition, structure and morphology. （My theme）In this talk, we focus on controllable synthesis of morphology and use it as mesoscale to obtain the quantification and optimization of the relevant processes. P4 （Catalysis VS your materials） As for heterogeneous catalysis, it is widely known that macroscopic parameters such as the yield, selectivity, products and rate of chemical reactions are related to the nano-structure of catalyst including morphology, size, pore and composition. Because nano-structure can produce various effects on chemical process such as…. P5 （Drug-delivery VS your materials） And when it comes to drug delivery, the morphology and size of porous materials are two main subjects. (you can refer to some references to support your idea) Prof. Mou found that rod-like particles have many 优势（pointing）compared to sphere morphology. Prof. Tang studied mesoporous silica nanoparticles with aspect ratio from 1 to 5 as drug-carrier. She found that the AR of MSNs affect greatly these aspects. vivo

国际会议口头报告演讲内容准备模板.docx

国际会议论文摘要post样版

国际会议作报告英语发言稿

最新国际会议通知范文

会议论文模板

国际会议作报告英语发言稿

在国际会议上做好口头报告的必备环节

EI国际会议模板(TTP)

英文国际会议演讲稿范文

国际会议论文格式要求

国际会议发言稿英文(精选多篇)

2014年加拿大会议-国际会议口头报告讲稿

相关文档

最新文档

国际会议口头报告演讲内容准备模板.docx

国际会议论文摘要post样版

国际会议作报告英语发言稿

最新国际会议通知范文

会议论文模板

国际会议作报告英语发言稿

在国际会议上做好口头报告的必备环节

EI国际会议模板(TTP)

英文国际会议演讲稿范文

国际会议论文格式要求

国际会议发言稿 英文(精选多篇)

2014年加拿大会议-国际会议口头报告讲稿

相关文档

最新文档

国际会议发言稿英文(精选多篇)