写作超朴素模版argument

【Assumptions】

In this argument, the author concludes that xxx. To buttress his conclusion, he shows that xxx; also, he argues that xx; finally, the fact is given showing that xxx. While this program might be beneficial to some extent, the reasoning of this argument is unconvincing due to several unsubstantiated assumptions which, if proven unwarranted, will seriously challenge the author’s recommendation.

To start off, the author’s conclusion that xxx fundamentally relies on the assumption that xxx, to put it in a more specific way, xxx. Even though xxx, it is imprudent to assume that xxx. It is highly likely that xxx; it is of equal possibility that xxx. If either of the previous scenarios turns out to be true, the assumption that xx is disproved and the conclusion is unreasonable.

Moreover, the author claims that xxx. What underlies the claim is the assumption that xxx. However, such an assumption is doubtful due to xxx. When xxx, the assumption will be proved unwarranted and the conclusion will be further weakened.

Last, the author’s argument also suffers from a questionable assumption which hastily xxx. In such a circumstance, the author’s proposal to xxx is not feasible, but theoretical at best.

To sum up, even though the conclusion that xxx might be right, the underlying assumptions lack significant support. As examined above, the potential untenability would cast great doubt on the author’s conclusion.

【Evidence】

In this argument, the author concludes that xxx. To buttress his conclusion, he cites the evidence that xxx; also, he claims that xxx; finally, the fact is given showing that xxx. However, the information given in the argument sion does not suffice to evaluate the soundness of the conclusion. Therefore, we need further evidence to help us assess the argument.

To start off, we need evidence to verify that xxx. While the author shows that xxx, no evidence serves to rule out the possibility that

xxx. Thus, additional evidence gains great significance to determine whether xxx, for example, xx, xx, and most importantly, xx. If new evidence shows that xxx, then it is reasonably safe to claim that xxx, and therefore the author’s recommendation is weakened. However, if new evidence discloses an opposite situation, then the proposal in the argument is strengthened.

Moreover, even if we acknowledge for a moment that xxx, more evidence is needed to help us evaluate xxx. The author mentions that xxx, but gives no information regarding xxx. If new discoveries indicate that xxx, xxx was possible in this way. On the contrary, new evidence that xxx would help support the conclusion that xxx. Last, despite the presence of all the previous evidence, an accurate evaluation of the developer’s request requires additional information. Specific evidence is needed to show whether xxx; whether xxx. If the answer is positive, then the reasoning of the argument is strengthened; however, if xxx, we are reluctant to believe that xxx. To sum up, the evidence cited by the developer does not provide enough conclusive information to make their request convincing. As a result, we need additional evidence to better evaluate the argument. 【Explanation】

In this argument, the author concludes that xxx. To buttress his conclusion, he cites the evidence that xxx; also, he claims that xxx; finally, the fact is given showing that xxx. While I concede that xx, I maintain that other plausible explanations can also account for the facts presented in this argument. However, with only the current information, we are unable to decide which explanation is best. Nor is it utterly certain that one factor alone is responsible for the facts presented in the argument.

To start off, the author claims that xxx. However, XXX might not be the only factor leading to the fact. For example, it is highly likely that…; it is of equal possibility that xxx. If either of the previous scenarios turns out to be true, we remain unconvinced that the author’s explanation is the only one that can plausibly account for the facts.

Moreover, even if xxx, it is hasty to attribute xxx to xxx. XXX. Without further information, we cannot unhesitatingly preclude the possibility that xxx. Thereby it is ill-conceived to solely xxx.

Last, xxx. XXX. I therefore reserve my approval of the author’s claim which xxx.

To sum up, even though the proposed explanation in the argument seems to plausibly account for the facts, we should not ignore other possible explanations which could rival the author’s explanation.【Question】

In this argument, the author concludes that xxx. To buttress his conclusion, he cites the evidence that xxx; also, he claims that xxx; finally, the fact is given showing that xxx. Plausible as the conclusion may appear, we need to ask more questions and the answers to these questions would help evaluate the author’s recommendation.

To start off, the author’s reasoning fundamentally relies on that xx, a question that is not answered. It is possible that xxx. This scenario would seriously challenge xx, and render the author’s recommendation much less advisable. On the other hand, any valid proof that xxx will strengthen author’s argument.

Moreover, granted that xx and given the fact that xx, whether or not xx needs a second look. Behind the author’s argument lie two critical implied assertions. First, xxx. Second, xxx. Yet, if the author can provide information to unequivocally demonstrate that xxx, his/her conclusion will have weight.

Last, even if we acknowledge for a moment that xxx, it remains to be seen xxx. If, for instance, xxx, it is doubtful that xxx.

To sum up, a better evaluation of the recommendation behooves us to ask more questions and the answers to these questions would help us decide whether the recommendation is likely to have the predicted result.

250×700梁模板(扣件式)计算书讲解

梁模板（扣件式）计算书计算依据： 1、《建筑施工模板安全技术规范》JGJ162-2008 2、《建筑施工扣件式钢管脚手架安全技术规范》JGJ 130－2011 3、《混凝土结构设计规范》GB50010-2010 4、《建筑结构荷载规范》GB 50009-2012 5、《钢结构设计规范》GB 50017-2003 一、工程属性 新浇混凝土梁名称WKL14 新浇混凝土梁计算跨度(m) 8.2 混凝土梁截面尺寸(mm×mm) 250×700 新浇混凝土结构层高(m) 6.6 梁侧楼板厚度(mm) 120 二、荷载设计

平面图

立面图四、面板验算

W ＝bh 2/6=1000×15×15/6＝37500mm 3，I ＝bh 3/12=1000×15×15×15/12＝281250mm 4 q 1＝0.9max[1.2(G 1k + (G 2k +G 3k )×h)+1.4Q 2k ，1.35(G 1k + (G 2k +G 3k )×h)+1.4×0.7Q 2k ]×b=0.9max[1.2×(0.1+(24+1.5)×0.7)+1.4×2，1.35×(0.1+(24+1.5)×0.7)+1.4×0.7×2]×1＝23.57kN/m q 2＝(G 1k + (G 2k +G 3k )×h)×b=[0.1+(24+1.5)×0.7]×1＝17.95kN/m 1、强度验算 M max ＝q 1l 2/8＝23.57×0.252/8＝0.18kN·m σ＝M max /W ＝0.18×106/37500＝4.91N/mm 2≤[f]＝15N/mm 2 满足要求！ 2、挠度验算 νmax ＝5qL 4/(384EI)=5×17.95×2504/(384×10000×281250)＝0.325mm≤[ν]＝l/400＝250/400＝0.62mm 满足要求！ 3、支座反力计算 设计值(承载能力极限状态) R 1=R 2=0.5q 1l=0.5×23.57×0.25＝2.95kN 标准值(正常使用极限状态) R 1'=R 2'=0.5q 2l=0.5×17.95×0.25＝2.24kN 五、小梁验算 小梁类型 方木 小梁材料规格(mm) 45×90 小梁抗弯强度设计值[f](N/mm 2 ) 15.44 小梁抗剪强度设计值[τ](N/mm 2 ) 1.78 小梁弹性模量E(N/mm 2 ) 9350 小梁截面抵抗矩W(cm 3 ) 60.75 小梁截面惯性矩I(cm 4) 273.38 为简化计算，按四等跨连续梁和悬臂梁分别计算，如下图：

Argument写作模板

In this argument, the arguer concludes that . The arguer bases the argument on . The arguer claims despite this that, . This argument is unconvincing because the arguer ignores several possible reasons other than for these discrepancies. First of all, the survey only . It is possible that . For example, perhaps . A survey that covers only is hardly convincing that.原因Secondly, it is entirely possible that . If . Ignoring further weakens the argument. Simply does not necessarily mean that .时间Furthermore, it is possible that . Failing to address this possibility further weakens the argument.地点In summary, this argument is based on a very narrow study of only . To strengthen the argument, the arguer needs to directly before jumping to the conclusion that . must supply clear and direct evidence other than other factors that ------ was responsible for must also provide evidence that unadvised imprudent indiscreet unconvincing unpersuasive be not convincing unsubstantiated unsound( unwarranted无根据的) ignore fail to overlook base on rely on(upon) dependent on according to It is possible(probable) that It is possible for sb to do sth there are some possibilities that there is some possibilities that It is likely that sb is likely to do sth be less inclined to do be bound to be certain to do definitely be sure of for certain must be mean to be equivalent to+n represent the same as A does not necessarily indicate that B take into account consider think about account for(对…做出解释) moreover what’s more besides, furthermore make sure that(确认) however，whereas（然而，反之）nonetheless(尽管如此；但是)， support strengthen reinforce bolster(支持) prove testify attest(证明)

论文格式范文模板

论文格式范文模板 导读：范文论文格式范文模板 【篇一：大学学术论文格式范文模板】 一、论文格式要求 (一)需报送全文，文稿请用word录入排版。字数不超过5000字。 (二)应完整扼要，涉及主要观点的图片、曲线和表格不能缺少，正文要有“结论”部分。如稿件内容不清或文章篇幅超长等原因，编辑有权删改。 (三)论文结构请按下列顺序排列： 1.大标题(第一行)：三黑字体，居中排。 2.姓名(第二行)：小三楷字体，居中排。 3.作者单位或通信地址(第三行)：按省名、城市名、邮编顺序排列，用小三楷字体。

4.关键词。需列出4个关键词，小三楷字体。第1个关键词应为二级学科名称。学科分类标准执行国家标准；关键词后请列出作者的中国科协所属全国性学会个人会员的登记号 5.正文。小四号宋体。文中所用计量单位，一律按国际通用标准或国家标准，并用英文书写，如km2，kg等。文中年代、年月日、数字一律用阿拉伯数字表示。 正文中的各级标题、图、表体例见下表： 表；标题体例 标题级别字体字号格式说明 一级标题三号标宋居中题目 二级标题四号黑体左空2字，单占行汉字加顿号，如“一、” 三级标题四号仿宋体左空2字，单占行汉字加括号，如“(一)” 四级标题小四号黑体左空2字，单占行阿拉伯数字加下圆点，如“1.”

五级标题小四号宋体左空2字，右空1字，接排正文阿拉伯数字加括号，如“(1)”允许用于无标题段落 图、表、注释及参考文献体例 内容字体字号格式说明 图题五号宋体排图下，居中，单占行图号按流水排序,如“图1；“图2” 图注小五号宋体排图题下，居中，接排序号按流水排序，如“1.”；“2.” 表题五号黑体排表上，居中，可在斜杠后接排计量单位，组合单位需加括号如“表2几种发动机的最大功率/kW”“表5几种车辆的速度/(km/h)”表序号按流水排序，如“表1”、“表2” 表栏头小五号宋体各栏居中，计量单位格式同上 图文/表文小五号宋体表文首行前空1字，段中可用标点，段后不用标点

模板计算书

400x1600梁模板支架计算书一、梁侧模板计算 （一）参数信息 1、梁侧模板及构造参数 梁截面宽度 B(m):；梁截面高度 D(m):； 混凝土板厚度(mm):； 采用的钢管类型为Φ48×3； 次楞间距(mm)：300；主楞竖向道数：4； 穿梁螺栓直径(mm)：M12； 穿梁螺栓水平间距(mm)：600； 主楞材料：圆钢管； 直径(mm)：；壁厚(mm)：； 主楞合并根数：2； 次楞材料：木方； 宽度(mm)：；高度(mm)：； 2、荷载参数

新浇混凝土侧压力标准值(kN/m2):； 倾倒混凝土侧压力(kN/m2):； 3、材料参数 木材弹性模量E(N/mm2)：； 木材抗弯强度设计值fm(N/mm2)：；木材抗剪强度设计值fv(N/mm2)：； 面板类型：胶合面板；面板弹性模量E(N/mm2)：； 面板抗弯强度设计值fm(N/mm2)：； （二）梁侧模板荷载标准值计算 =m2； 新浇混凝土侧压力标准值F 1 （三）梁侧模板面板的计算 面板为受弯结构,需要验算其抗弯强度和刚度。强度验算要考虑新浇混凝土侧压力和倾倒混凝土时产生的荷载；挠度验算只考虑新浇混凝土侧压力。 面板计算简图(单位：mm) 1、强度计算 面板抗弯强度验算公式如下： σ = M/W < f 其中，W -- 面板的净截面抵抗矩，W = 150××6=81cm3； M -- 面板的最大弯矩(N·mm)； σ -- 面板的弯曲应力计算值(N/mm2) [f] -- 面板的抗弯强度设计值(N/mm2)； 按照均布活荷载最不利布置下的三跨连续梁计算：

M = 1l+ 2 l 其中，q -- 作用在模板上的侧压力，包括: 新浇混凝土侧压力设计值: q 1 = ×××= kN/m； 倾倒混凝土侧压力设计值: q 2 = ××4×=m； 计算跨度(次楞间距): l = 300mm； 面板的最大弯矩 M= ××3002+××3002= ×105N·mm； 面板的最大支座反力为： N= 1l+ 2 l=××+××=； 经计算得到，面板的受弯应力计算值: σ = ×105/ ×104=mm2； 面板的抗弯强度设计值: [f] = 15N/mm2； 面板的受弯应力计算值σ =mm2小于面板的抗弯强度设计值 [f]=15N/mm2，满足要求！ 2、抗剪验算 Q=××300+××300)/1000=； τ=3Q/2bh=3××1000/(2×1500×18)=mm2； 面板抗剪强度设计值：[fv]=mm2； 面板的抗剪强度计算值τ=mm2小于面板的抗剪强度设计值 [f]=mm2，满足要求！ 3、挠度验算 ν=(100EI)≤[ν]=l/150 q--作用在模板上的侧压力线荷载标准值: q=×； l--计算跨度: l = 300mm； E--面板材质的弹性模量: E = 6000N/mm2； I--面板的截面惯性矩: I = 150×××12=72.9cm4； 面板的最大挠度计算值: ν = ××3004/(100×6000××105) = 0.722 mm； 面板的最大容许挠度值:[v] = min(l/150,10) =min(300/150,10) = 2mm； 面板的最大挠度计算值ν =0.722mm 小于面板的最大容许挠度值 [v]=2mm，满

六级作文万能模板(一次搞定)

6级作文模板 1）先背3个句子 1 Nowadays with the rapid development of advanced ……., more and more….. are commonly and widely used in everyday life.(讲重要性) 2 The popularity of digital …will have great influence on our work, study and everyday life. On the one hand …, But on the other hand. （讲影响） 3To conclude, …..are just like a double-edged sword. With them we may have less trouble dealing with problems in life and enjoy a better-off life. However, one point should be kept in mind that we should take sensible use of them , always being the master of them.（结 尾段） 2）模板（2个模板） 1 开头段：先讲重要性，然后转讲不好的地方。 中间段：措施 结尾段：先来个小转折再进入总结 开头段Nowadays with the rapid development of advanced ……., more and more….. are commonly and widely used in everyday life. However, what worries most of us is that……

argument英语写作范文

Free-ingoing of People, Not Good For China Do you know what is “Immigration Wave”? Have you heard about “Ireland’s Great Famine”? It’s one of the greatest event of immigration in history that a big movement of people into America from Europe because of the poor agriculture and economic crisis happened in 1840s. 1Movement of population can not be avoided. However, free migration is not good for every country, especially China, as it has limited resources but with overpopulated problem and illegal immigrants influencing public security is another problem, too. In the first place, the contradiction between people and resources even environment will be exacerbated because of the flood of ingoing people. China, a country with large area and tremendous capacity of resources, is the most populous nation in the world at the same time. It was predicted that the population of China will rise to 1.46 billion by 2020. 2 If all foreigners entering China are allowed, it will not only weaken the carrying capacity of the environment but also cause a lack of resources relatively. In addition, illegal immigrants, as a part of the ingoing people, will threaten the public security if all foreigners are allowed to enter China. Most of the illegal immigrants come to China for living, some of whom can do nothing but the unlawful jobs, and some of whom may even not have one. As a result, they will not create any value for the society and more importantly, the society problems on welfare, economy even crime will be unavoidable because of their unlawful identity. It may be claimed that free-ingoing of people do good to China because it will

论文写作范式(写作模板)

论文写作范式 （论文写作目标：解决具体问题） 一、基本格式 标题。标题表示写作内容。例如：中信建投公司资产管理产品创新研究 大约写五章到六章，其中第一章和最后一章是只有章、节（条）两级标题，其他章有章、节（条）、目（款）三级标题。 第一章绪论 1.1 选题背景：回答为什么选择该内容作为论文题目。 1.2 研究目标：回答选择该题目要达到什么目的。 1.3 文献综述：以往研究同一题目的文献及相关观点。 1.4 论文结构：论文思路及结构设计。 1.5 论文创新观点：研究结论视为创新观点。 第二章到第四章通过例举一个案例表现作者具有解决具体管理问题的能力。 第二章案例内容。例如：中信建投公司资产管理产品创新现状 第三章问题分析。例如：中信建投资产管理产品创新中的问题和原因 第四章对策建议。例如：中信建投资产管理产品创新的对策 第五章结论 5.1 研究结论 先总体对研究结论进行总结，然后提出5个左右的研究结论，每个结论用标题列出，在结论标题后做一段归纳论述。 5.2 研究局限与展望 写两段，一段是从理论和应用两方面谈研究局限，一段从理论和应用两方面谈研究展望。（这部分不用标题） 二、文字要求 1.标题尽量用短句，即使用单句结构标题，不要使用从句或复句结构标题。 2.标题尽量用较少成分、结构简单的句型（不要使用带所有成分的结构句型。句子所有成分包括主、谓、宾、定、补、状） 3.每章三节（条）左右，每节三目（款）左右 4.节与节、目与目的句型结构一致 5.注意关键词或主题词4个，一般为实词，词与词不能有重复，不能与论文标题有关词完全重复。 三、文字数量及结构安排 除绪论和研究结论章之外，各章之间的文字数量基本相同，各节之间的文字数量基本相同。 四、5.1研究结论部分的写法 五、摘要写法 摘要要写成一篇短文，而不是第一章包含什么内容之类的论文介绍写法。 摘要包含5段，总计2000字左右，不得超过。 一段：选题背景相关内容（300字左右）； 二段：研究目标相关内容（200-300字左右） 三段：研究内容相关文献的观点（300-400字左右） 四段、五段：论文案例研究内容及研究结论（1000字左右）

模板计算书(最终版)

附录一： 1 模板及外挂架计算书 1.1墙体定型大模板结构模板计算 该模板是按《大模板多层住宅结构设计与施工规程》（JGJ20-84）﹑《钢结构设计规范》（GBJ17-88）与《混凝土结构工程施工及验收规范》（GB50204-2002）的要求进行设计与计算的。 已知：层高为2900mm，墙厚200mm，采用全刚模数组合模板系列，2根[10#背楞，采用T30穿墙螺栓拉结，混凝土C30﹑Y=24KN/m2，混凝土塌落度13cm，采用泵送混凝土，浇筑速度1.8m/h，温度T=25，用插入式振动器捣实，模板挠度为L/400（L为模板构件的跨度）。 模板结构为：面板6mm厚普热板，主筋为[8#，间距h=300mm，背楞间距L1=1100mm，L2=300mm，穿墙螺栓水平间距L3=1200mm。L=5400mm。 1.1.1 模板侧向荷载 混凝土侧压力标准值： F=0.22Y*β1β2ν1/2*250/(T+15) =0.22*24*1*1.15*1.81/2*250/(25+15) =50.92KN/m2 混凝土侧压力设计值： F1=50.92*1.2=61.1KN/m2 有效压头高度：h=61.1/24=2.55m 2.混凝土倾倒力标准值：4KN/m2 其设计值:4*1.4=5.6KN/m2 1.1.2 面板验算 由于5400/250=21.6>2，故面板按单向板三跨连续梁计算。1. 强度验算: 取1m宽的板条为计算单元 F3=F1+F2=48.88+5.6=54.48KN/m2=0.05448N/mm2 q=0.05448*1*0.85=0.046308N/mm

M max=K mx ql y2=0.117*0.046308*2602=366.26N.mm 则: W x=1/6*1*62=6mm3 所以: δmax=M max/(γx W x)=366.26/1*6=61.04N/mm2

六级作文万能模板.doc

六级作文模板 1）先背3个句子 1.Nowadays with the rapid development of advanced ........ . more and more.... are commonly and widely used in everyday life.（讲重要性） 2.The popularity of digital ...will have great influence on our work, study and everyday life. On the one hand …，But on the other hand. （讲影响） 3.To conclude, ..... a rc just like a double-edged sword. With them wc may have less trouble dealing with problems in life and enjoy a better-off life. However, one point should be kept in mind that wc should take sensible use of them , always being the master of them. （结尾段） 注意：灵活运用第1句和第2句，根据不同模板自由组合 2）模板（2个模板） 1,开头段：先讲重要性，然后转讲不好的地方。中间段：措施结尾段：先来个小转折再进入总结 开头段Nowadays with the rapid development of advanced ........ . more and more ... are commonly and widely used in everyday life. However, what worries most of us is that ...... 中间段Firstly....Secondly Lastly but in no means least ........... 结尾段To conclude, ...... are just like a double-edged sword. With them we may have less trouble dealing with problems in life and enjoy a better-off life. However, one point should be kept in mind that we should take sensible use of them , always being the master of them. 2,开头段：先讲重要性，然后转讲争论 中间段：转折（即列出两种不同人的观点） 结尾段：直接进入总结（即你的观点） 开头段:It is accepted that plays a significant part for both .一, and what's more , a lot of attention is being drawn to the change of ....... However, whether ... deserves such an attention , people's ideas vary. 中间段：On the one hand, some people hold the view that ...... On the other hand, a great many people insist that.... 结尾段：From my perspective, however....（你的观点）.Therefore, it's time that （措施之类的） 6级作文万能句子（补充在”.....”里面的万能句子，自己琢磨停个句子放在哪里比较适合）重点背：1） 5） 6） 7）句子，最好全部都背过一遍，自己琢磨怎么用。 1）Sth will make our life more enjoyable, that is to say, sth can add color to the dull routine of every day life.。。。能让我们的生活更美好，也就是说，。。。可以给我们枯燥的生活带来色彩 2）For the majority of people, reading or learning a new skill has become the focus of their lives and the source of their happiness and contentment对于很多人来说，学习一门新技术占据了他们的生活和充实了他们的生活。 3）ooooo,by occupying spare time so constmctively, makes a person contented, with no time for boredom.。。。占据了某人大部分时间，使得某人没空想东想西（充实了某人生活） 4）What's more, living io school can save them a great deal of time on the way between home and school everyday, so they would be able to concentrate more time and energy on their academic work.住校为学生省去了不少时间，这样学生可以把更多的时间用在学习上 5）Little by little, our knowledge will be well enriched, and our horizons will be greatly broadened. 一点一滴，这样做可以丰富我们的知识和拓宽我们的视野 6）For people who want to adopt a healthy and meaningful life style, it is important to find time to learn certain new knowledge. Just as an old saying goes: it is never too late to leam.对于想过一种有意义的人来说，抽空学习一门新技术很重要 7） The majority of students believe that part-time job will provide them with more opportunities to develop their interpersonal skills,

新GRE写作Argument范文

新GRE写作Argument范文 来源：互联网 新对于国内考生比较难的一个问题就是中国人的思维与西方人不同，所以的方式也不太一样。因此，大家可以通过参考一些优秀的新GRE的范文来提高自己的写作水平。 Discuss how well reasoned you find this argument. following appeared in a memorandum written by the vice president of Nature's Way, a chain of stores selling health food and other health-related products. "Previous experience has shown that our stores are most profitable in areas where residents are highly concerned with leading healthy lives. We should therefore build our next new store in Painesville, which has many such residents. Painesville merchants report that sales of running shoes and exercise clothing are at all-time highs. The local health club, which nearly closed five years ago due to lack of business, has more members than ever, and the weight training and aerobics classes are always full. We can even anticipate a new generation of customers: Painesville's schoolchildren are required to participate in a 'fitness for life' program, which emphasizes the benefits of regular exercise at an early age." following appeared in a letter sent by a committee of homeowners from the Deer haven Acres to all homeowners in Deer haven Acres.

论文写作格式模板,,,,,,,,,

论文写作格式模板,,,,,,,,,

导论 ............................................................................................ 错误!未定义书签。 一、问题提出 ...................................................................错误!未定义书签。 二、选题价值 ...................................................................错误!未定义书签。 三、文献综述 ...................................................................错误!未定义书签。 四、文章思路 ...................................................................错误!未定义书签。 五、研究方法 ...................................................................错误!未定义书签。 六、创新与不足 ...............................................................错误!未定义书签。第一章我国会计准则国际趋同概述 .......................................... 错误!未定义书签。 一、我国会计准则国际趋同的涵义及特征...................错误!未定义书签。 （一）会计准则国际趋同的含义......................错误!未定义书签。 （二）会计准则国际趋同的特征......................错误!未定义书签。 二、我国会计准则国际趋同的理论基础.......................错误!未定义书签。 （一）会计准则国际趋同的必要性..................错误!未定义书签。 （二）会计准则国际趋同的可行性..................错误!未定义书签。第二章我国新企业会计准则与国际财务报告准则的比较分析错误!未定义书签。 一、我国新企业会计准则与国际财务报告准则体系的差异错误!未定义 书签。 （一）国际财务报告准则的体系构成..............错误!未定义书签。 （二）我国新企业会计准则体系的构成..........错误!未定义书签。 （三）我国新企业会计准则体系与国际财务报告体系的比较和分 析..........................................................................错误!未定义书签。 二、我国新企业会计准则与国际财务报告准则项目涵盖范围的比较错误! 未定义书签。 三、我国会计准则体系与国际财务报告体系下财务会计概念框架的比较 ...........................................................................................错误!未定义书签。 四、我国新企业会计准则与国际财务报告准则差异的主要表现错误!未 定义书签。 （一）公允价值的适用范围不同......................错误!未定义书签。 （二）企业合并的范围和会计处理方法有差异错误!未定义书签。 （三）关联方及其交易的披露范围有区别......错误!未定义书签。 （四）资产减值的相关规定不一致..................错误!未定义书签。 （五）政府补助的会计处理有差距..................错误!未定义书签。 （六）资本与资本保全的处理未规定..............错误!未定义书签。 五、我国新企业会计准则与国际财务报告准则的具体差异错误!未定义 书签。 第三章我国新企业会计准则国际趋同的历程和影响 .............. 错误!未定义书签。 一、我国新企业会计准则国际趋同的历程...................错误!未定义书签。

模板计算书范本

剪力墙计算书： 一、参数信息 1.基本参数 次楞(内龙骨)间距(mm):200；穿墙螺栓水平间距(mm):600；主楞(外龙骨)间距(mm):500；穿墙螺栓竖向间距(mm):500；对拉螺栓直径(mm):M14； 2.主楞信息 龙骨材料:钢楞；截面类型:圆钢管48×； 钢楞截面惯性矩I(cm4):；钢楞截面抵抗矩W(cm3):； 主楞肢数:2； 3.次楞信息 / 龙骨材料:木楞； 宽度(mm):；高度(mm):； 次楞肢数:2； 4.面板参数 面板类型:木胶合板；面板厚度(mm):； 面板弹性模量(N/mm2):； 面板抗弯强度设计值f (N/mm2):； c 面板抗剪强度设计值(N/mm2):； 5.木方和钢楞 (N/mm2):；方木弹性模量E(N/mm2):；方木抗弯强度设计值f c (N/mm2):； 方木抗剪强度设计值f t 】 钢楞弹性模量E(N/mm2):； 钢楞抗弯强度设计值f (N/mm2):； c

墙模板设计简图 二、墙模板荷载标准值计算 按《施工手册》，新浇混凝土作用于模板的最大侧压力，按下列公式计算，并取其中的较小值: 其中γ -- 混凝土的重力密度，取m3； t -- 新浇混凝土的初凝时间，可按现场实际值取，输入0时系统按200/(T+15)计算，得； T -- 混凝土的入模温度，取℃； V -- 混凝土的浇筑速度，取h； & H -- 模板计算高度，取； β -- 外加剂影响修正系数，取； 1 -- 混凝土坍落度影响修正系数，取。 β 2 根据以上两个公式计算的新浇筑混凝土对模板的最大侧压力F； 分别为 kN/m2、 kN/m2，取较小值 kN/m2作为本工程计算荷载。 计算中采用新浇混凝土侧压力标准值 F1=m2； 倾倒混凝土时产生的荷载标准值 F2= 2 kN/m2。

英语六级作文万能模板(精华版)

英语6级作文模板: 模板（2个模板） 1 开头段：先讲重要性，然后转讲不好的地方。中间段：措施结尾段：先来个小转折再进入总结 开头段Nowadays with the rapid development of advanced ……., more and more…..are commonly and widely used in everyday life. However, what worries most of us is that…… 中间段First ly….Secondly…https://www.sodocs.net/doc/fa11847917.html,stly but in no means least…… 结尾段To conclude, …..are just like a double-edged sword. With them we may have less trouble dealing with problems in life and enjoy a better-off life. However, one point should be kept in mind that we should take sensible use of them , always being the master of them. 2 开头段：先讲重要性，然后转讲争论 中间段：转折(即列出两种不同人的观点) 结尾段：直接进入总结（即你的观点） 开头段：It is accepted that …. Plays a significant part for both …, and what’s more , a lot of attention is being drawn to the change of….. However, whether … deserves such an attention , people’s ideas vary. 中间段：On the one hand, some people hold the view that ….. On the other hand, a great many people insist that…. 结尾段：From my perspective, however…. (你的观点) . Therefore, it’s time that (措施之类的)

论文写作格式模板

木聚糖降解菌的筛选及分子鉴定 作 者：××× 指导老师：××× 从宝天曼地区采集的腐木中富集、分离出了16株能够降解木聚糖的 6株菌株在摇床180 r/min 、28 ℃的条件下发酵培养48 h M3 。提取菌株M3的基因组进行26S rDNA PCR 初步鉴定菌株M3属于木聚糖降解菌；筛选；分子鉴定；木聚糖酶；酶活 0 引言 纤维素类物质是一类大量存在而又可再生的重要潜在资源，半纤维素占总纤维素的15%~30%，其中主要成分是木聚糖。与纤维素相比，半纤维素更易为微生物所降解和转化。该酶具有广泛的应用前景[2] ， 研究，已有不少研究者对黑曲霉、木霉(Trichoderma sp.)等真菌及短小芽孢杆菌(Bacillus pumilus)、环状芽孢杆菌(B.circulans)等细菌的木聚糖酶进行了研究。 糖，从中很容易筛选得到高效降解木聚糖的菌株。本研究主要从宝天曼森林腐木中富集、分离、筛选出产木聚糖酶菌株，并分析它们木聚糖酶的酶 活力大小，找出酶活力较高的分离菌株。最后通过分子生物学方法测定分离菌株的26S rDNA 序列并对其进行序列相似性分析和系统发育树分析，初

步鉴定出分离菌株在系统发育上的分类地位。 材料与方法 样品 取自实验室保存的宝天曼地区采集的腐木。 试剂 溴钾酚绿、1%刚果红溶液、1 mol/L NaCl 溶液、柠檬酸缓冲液、DNS 试剂、试剂酵母基因组提取试剂盒、PCR Magic Mix2.0、NL 1、引物NL 4、TAE 缓冲液、琼脂糖凝胶、EB 试剂。 培养基[3] 木聚糖1%、酵母氮基础培养基1%、氯霉素(80 μL/100 mL)； 0.5%2%、80 μL/100 mL ）； 1%、（80 mL ）； 0.3%、麦芽粉0.3%、蛋白胨0.5%、琼脂2%、氯霉μL/100 mL ）； 1.4 菌株筛选[4,5] 1.4.1 富集培养 取7支干净小试管，向每支试管中分装入3～5 mL 富集培养基，于121 ℃高压灭菌锅中灭菌20 min 。用镊子夹取少许实验室保存的7种森林腐木分别放入已灭菌的富集培养基中，于28 ℃温箱中富集培养2～3 d 。 1.4.2 平板分离 对培养后变混浊的富集培养液按照梯度稀释法用无菌水稀释到10-5，在超净工作台中的无菌条件下，准确吸取100 μL 的10-3～10-5不同稀释倍数的菌液涂布于已灭菌的平板培养基上，于28 ℃温箱中倒置培养2～3 d 。 1.4.3 纯化菌种 根据菌落形态特征的比对，找出不同形态的菌株。在无菌条件下，挑取不同形态的单菌落在已灭菌的纯化培养基上进行扇形划线，于28 ℃温箱中倒置培养2～3 d 。按照同样的方法划线2～3次后即可得到纯菌落。 用镊子夹取已灭菌的牙签，将纯化培养基中的纯菌落点蘸到鉴别培养