H3C交换机配置

1、win7通过超级终端进入H3C交换机，端口设置需要修改

2、输入sys进入配置模式

3、进入24端口（在输入命令时按Tab键会智能补全命令）[H3C]interface GigabitEthernet 1/0/24

4、设置24端口为trunk口

[H3C- GigabitEthernet 1/0/24]port link-type trunk

[H3C- GigabitEthernet 1/0/24]port trunk permit vlan all [H3C- GigabitEthernet 1/0/24]quit

[H3C]interface GigabitEthernet 1/0/1

[H3C- GigabitEthernet 1/0/1]port access vlan 101 [H3C- GigabitEthernet 1/0/1]quit

6、进入端口2，设置端口2为vlan102

[H3C]interface GigabitEthernet 1/0/2

[H3C- GigabitEthernet 1/0/1]port access vlan 102 [H3C- GigabitEthernet 1/0/1]quit

[H3C]interface GigabitEthernet 1/0/3

[H3C- GigabitEthernet 1/0/1]port access vlan 103 [H3C- GigabitEthernet 1/0/1]quit

8、进入端口4，设置端口4为vlan104

[H3C]interface GigabitEthernet 1/0/4

[H3C- GigabitEthernet 1/0/1]port access vlan 104 [H3C- GigabitEthernet 1/0/1]quit

9、输入save保存配置

10、进入vlan101，设置端口9-16为vlan101（给vlan批量添加端口）[H3C]vlan 101

[H3C-vlan101] port GigabitEthernet 1/0/9 to GigabitEthernet 1/0/16 [H3C-vlan101]quit

11、进入vlan102，设置端口17-20为端口102（给vlan批量添加端口）[H3C]vlan 101

[H3C-vlan101] port GigabitEthernet 1/0/9 to GigabitEthernet 1/0/16 [H3C-vlan101]quit