管理信息系统外文翻译

管理信息系统外文翻译-标准化文件发布号：（9456-EUATWK-MWUB-WUNN-INNUL-DDQTY-KII

英文文献翻译

二〇年月日

科技文章摘译

Definition of a Management Information System There is no consensus of the definition of the term "management information system". Some writers prefer alternative terminology such as "information processing system", "information and decision system", "organizational information system", or simply "information system" to refer to the computer-based information processing system which supports the operations, management, and decision-making functions of an organization. This text uses “MIS” because it is descriptive and generally understood; it also frequently uses “information system” instead of “MIS” to refer to an organizational information system.

A definition of a management information system, as the term is generally understood, is an integrated, user-machine system for providing information to support operations, management, and decision-making functions in an organization. The system utilizes computer hardware and software; manual procedures; models for analysis planning, control and decision making; and a database. The fact that it is an integrated system does not mean that it is a single, monolithic structure; rather, it means that the parts fit into an overall design. The elements of the definition are highlighted below.

1 Computer-based user-machine system

Conceptually, management information can exist without computer, but it is the power of the computer which makes MIS feasible. The question is not whether computers should be used in management information system, but the extent to which information use should be computerized. The concept of a user-machine system implies that some tasks are best performed by humans, while others are best done by machine. The user of an MIS is any person responsible for entering input data, instructing the system, or utilizing the information output of the system. For many problems, the user and the computer form a combined system with results obtained through a set of interactions between the computer and the user.

User-machine interaction is facilitated by operation in which the user’s input-output device (usually a visual display terminal) is connected to the computer. The computer can be a personal computer serving only one user or a large computer that

serves a number of users through terminals connected by communication lines. The user input-output device permits direct input of data and immediate output of results. For instance, a person using the computer interactively in financial planning poses “what if” questions by entering input at the terminal keyboard; the results are displayed on the screen in a few second.

The computer-based user-machine characteristics of an MIS affect the knowledge requirements of both sys tem developer and system user. “computer-based” means that the designer of a management information system must have knowledge of computers and of their use in processing. The “user-machine” concept means the system designer should also understand the capabilities of humans as system components (as information processors) and the behavior of humans as users of information.

Information system applications should not require users to be computer experts. However, users need to be able to specify their information requirements; some understanding of computers, the nature of information, and its use in various management function aids users in this task.

2 Integrated system

Management information system typically provides the basis for integration of organizational information processing. Individual applications within information systems are developed for and by diverse sets of users. If there are no integrating processes and mechanisms, the individual applications may be inconsistent and incompatible. Data item may be specified differently and may not be compatible across applications that use the same data. There may be redundant development of separate applications when actually a single application could serve more than one need. A user wanting to perform analysis using data from two different applications may find the task very difficult and sometimes impossible.

The first step in integration of information system applications is an overall information system plan. Even though application systems are implemented one at a time, their design can be guided by the overall plan, which determines how they fit in with other functions. In essence, the information system is designed as a planed federation of small systems.

Information system integration is also achieved through standards, guidelines, and procedures set by the MIS function. The enforcement of such standards and procedures permit diverse applications to share data, meet audit and control requirements, and be shares by multiple users. For instance, an application may be

developed to run on a particular small computer. Standards for integration may dictate that the equipment selected be compatible with the centralized database. The trend in information system design is toward separate application processing form the data used to support it. The separate database is the mechanism by which data items are integrated across many applications and made consistently available to a variety of users. The need for a database in MIS is discussed below.

3 Need for a database

The term “information” and “data” are frequently used interchangeably; however, information is generally defined as data that is meaningful or useful to the recipient. Data items are therefore the raw material for producing information.

The underlying concept of a database is that data needs to be managed in order to be available for processing and have appropriate quality. This data management includes both software and organization. The software to create and manage a database is a database management system.

When all access to any use of database is controlled through a database management system, all applications utilizing a particular data item access the same data item which is stored in only one place. A single updating of the data item updates it for all uses. Integration through a database management system requires a central authority for the database. The data can be stored in one central computer or dispersed among several computers; the overriding requirement is that there is an organizational function to exercise control.

4 Utilization of Models

It is usually insufficient for human recipients to receive only raw data or even summarized data. Data usually needs to be processed and presented in such a way that the result is directed toward the decision to be made. To do this, processing of data items is based on a decision model. For example, an investment decision relative to new capital expenditures might be processed in terms of a capital expenditure decision model.

Decision models can be used to support different stages in the decision-making process. “Intelligence” models can be used to search for problems and/or opportunities. Models can be used to identify and analyze possible solutions. Choice models such as optimization models maybe used to find the most desirable solution In other words, multiple approaches are needed to meet a variety of decision situations. The following are examples and the type of model that might be included in an MIS to aid in analysis in support of decision-making; in a comprehensive

information system, the decision maker has available a set of general models that can be applied to many analysis and decision situations plus a set of very specific models for unique decisions. Similar models are available for planning and control. The set of models is the model base for the MIS.

The management information system (MIS) not only supports the underlying bed administrator, moreover may support the intermediate deck personnel's control check, for high level also can provide certain information. The management information system frame by four parts: Information source, information processor, information user and information superintendent. The information source is the information production place; Information processor burden task/role and so on information transmission, processing, save; The information user is the information user, carries on the decision-making using the information; The information superintendent is responsible for the information system the design, the implementation and the safeguarding. The management information system is regarded as generally a pyramid shape the structure, divides into from the lower level handling of traffic to the operating control, the control check, the topmost story strategic planning. The most basic unit greatly processes the numerous and diverse transaction information and the state information framing by the task/role.

In a word, the management information system (Management Information System, MIS), is by the artificial leadership, using the computer hardware, the software, the network communicates these devices and other office equipments carries on the information the collection, the transmission, the processing, the storage, the update and the safeguarding by achieved the enterprise strategy competes superior, enhances the benefit and the efficiency target, supports the enterprise the high level decision-making, the intermediate deck check and the basic unit operation integration man-machine system. MIS is the superintendent provides the report, provides the enterprise the recent situation as well as the historic record. This system main localization is aims at in the enterprise, for control function and so on level plan, check and decision-making serves, provides the data generally by the lower level handling of traffic system. MIS will be able the actual enterprise's each kind of run situation, and using the past historical data forecast future, embarks the assistance enterprise from the enterprise overall situation angle to carry on the decision-making, used the message control enterprise the behavior, helped the enterprise to achieve its plan

毕业论文外文文献翻译-数据库管理系统的介绍

数据库管理系统的介绍 Raghu Ramakrishnan1 数据库（database,有时拼作data base）又称为电子数据库，是专门组织起来的一组数据或信息，其目的是为了便于计算机快速查询及检索。数据库的结构是专门设计的，在各种数据处理操作命令的支持下，可以简化数据的存储，检索，修改和删除。数据库可以存储在磁盘，磁带，光盘或其他辅助存储设备上。 数据库由一个或一套文件组成，其中的信息可以分解为记录，每一记录又包含一个或多个字段（或称为域）。字段是数据存取的基本单位。数据库用于描述实体，其中的一个字段通常表示与实体的某一属性相关的信息。通过关键字以及各种分类（排序）命令，用户可以对多条记录的字段进行查询，重新整理，分组或选择，以实体对某一类数据的检索，也可以生成报表。 所有数据库（最简单的除外）中都有复杂的数据关系及其链接。处理与创建，访问以及维护数据库记录有关的复杂任务的系统软件包叫做数据库管理系统（DBMS）。DBMS软件包中的程序在数据库与其用户间建立接口。（这些用户可以是应用程序员，管理员及其他需要信息的人员和各种操作系统程序）。 DBMS可组织，处理和表示从数据库中选出的数据元。该功能使决策者能搜索，探查和查询数据库的内容，从而对在正规报告中没有的，不再出现的且无法预料的问题做出回答。这些问题最初可能是模糊的并且（或者）是定义不恰当的，但是人们可以浏览数据库直到获得所需的信息。简言之，DBMS将“管理”存储的数据项，并从公共数据库中汇集所需的数据项以回答非程序员的询问。 DBMS由3个主要部分组成：（1）存储子系统，用来存储和检索文件中的数据；（2）建模和操作子系统，提供组织数据以及添加，删除，维护，更新数据的方法；（3）用户和DBMS之间的接口。在提高数据库管理系统的价值和有效性方面正在展现以下一些重要发展趋势； 1.管理人员需要最新的信息以做出有效的决策。 2.客户需要越来越复杂的信息服务以及更多的有关其订单，发票和账号的当前信息。 3.用户发现他们可以使用传统的程序设计语言，在很短的一段时间内用数据1Database Management Systems( 3th Edition ),Wiley ,2004, 5-12

英文文献及翻译：供配电系统(1800字)

供配电系统 摘要：电力系统的基本功能是向用户输送电能。lOkV配电网是连接供电电源与工业、商业及生活用电的枢纽，其网络庞大及复杂。对于所有用户都期望以最低的价格买到具有高度可靠性的电能。然而，经济性与可靠性这两个因素是互相矛盾的。要提高供电网络的可靠性就必须增加网络建设投资成本。但是，如果提高可靠性使用户停电损失的降低小于用于提高可靠性所增加的投资，那么这种建设投资就没有价值了。通过计算电网的投资和用户停电的损失，最终可找到一个平衡点，使投资和损失的综合经济性最优。 关键词：供配电，供电可靠性，无功补偿，负荷分配 1 引言 电力体制的改革引发了新一轮大规模的电力建设热潮从而极大地推动了电力技术革命新技术新设备的开发与应用日新月异特别是信息技术与电力技术的结合在很大程度上提高了电能质量和电力供应的可靠性由于技术的发展又降低了电力建设的成本进而推动了电网设备的更新换代本文就是以此为契机以国内外配电自动化中一些前沿问题为内容以配电自动化建设为背景对当前电力系统的热点技术进行一些较深入的探讨和研究主要完成了如下工作. (1)提出了配电自动化建设的两个典型模式即―体化模式和分立化模式侧重分析了分立模式下的配电自动化系统体系结构给出了软硬件配置主站选择管理模式最佳通讯方式等是本文研究的前提和实现平台. (2)针对配电自动化中故障测量定位与隔离以及供电恢复这一关键问题分析了线路故障中电压电流等电量的变化导出了相间短路工况下故障定位的数学描述方程并给出了方程的解以及故障情况下几个重要参数s U& s I& e I& 选择表通过对故障的自动诊断与分析得出了优化的隔离和恢复供电方案自动实现故障快速隔离与网络重构减少了用户停电范围和时间有效提高配网供电可靠性文中还给出了故障分段判断以及网络快速重构的软件流程和使用方法. (3)状态估计是实现配电自动化中关键技术之一本文在阐述状态估计方法基础上给出了不良测量数据的识别和结构性错误的识别方法针对状态估计中数据对基于残差的坏数据检测和异常以及状态量中坏数据对状态估计的影响及存在的问题提出了状态估计中拓扑错误的一种实用化检测和辩识方法针对窃电漏计电费问题独创性提出一种通过电量突变和异常分析防止窃电的新方法并在潍坊城区配电得到验证. (4)针对配电网负荷预测建模困难参数离散度大以及相关因素多等问题本文在分析常规负荷预测模型及方法基础上引入了气象因素日期类型社会环境影响等参数给出了基于神经网络的电力负荷预测方法实例验证了方法的正确性.

控制系统基础论文中英文资料外文翻译文献

控制系统基础论文中英文资料外文翻译文献 文献翻译 原文： Numerical Control One of the most fundamental concepts in the area of advanced manufacturing technologies is numerical control (NC).Prior to the advent of NC, all machine tools were manual operated and controlled. Among the many limitations associated with manual control machine tools, perhaps none is more prominent than the limitation of operator skills. With manual control, the quality of the product is directly related to and limited to the skills of the operator . Numerical control represents the first major step away from human control of machine tools. Numerical control means the control of machine tools and other manufacturing systems though the use of prerecorded, written symbolic instructions. Rather than operating a machine tool, an NC technician writes a program that issues operational instructions to the machine tool, For a machine tool to be numerically controlled , it must be interfaced with a device for accepting and decoding the p2ogrammed instructions, known as a reader. Numerical control was developed to overcome the limitation of human operator , and it has done so . Numerical control machines are more accurate than manually operated machines , they can produce parts more uniformly , they are faster, and the long-run tooling costs are lower . The development of NC led to the development of several other innovations in manufacturing technology: 1.Electrical discharge machining. https://www.sodocs.net/doc/1e947310.html,ser cutting. 3.Electron beam welding.

管理信息系统外文翻译

管理信息系统外文翻译-标准化文件发布号：（9456-EUATWK-MWUB-WUNN-INNUL-DDQTY-KII

英文文献翻译 二〇年月日

科技文章摘译 Definition of a Management Information System There is no consensus of the definition of the term "management information system". Some writers prefer alternative terminology such as "information processing system", "information and decision system", "organizational information system", or simply "information system" to refer to the computer-based information processing system which supports the operations, management, and decision-making functions of an organization. This text uses “MIS” because it is descriptive and generally understood; it also frequently uses “information system” instead of “MIS” to refer to an organizational information system. A definition of a management information system, as the term is generally understood, is an integrated, user-machine system for providing information to support operations, management, and decision-making functions in an organization. The system utilizes computer hardware and software; manual procedures; models for analysis planning, control and decision making; and a database. The fact that it is an integrated system does not mean that it is a single, monolithic structure; rather, it means that the parts fit into an overall design. The elements of the definition are highlighted below. 1 Computer-based user-machine system Conceptually, management information can exist without computer, but it is the power of the computer which makes MIS feasible. The question is not whether computers should be used in management information system, but the extent to which information use should be computerized. The concept of a user-machine system implies that some tasks are best performed by humans, while others are best done by machine. The user of an MIS is any person responsible for entering input data, instructing the system, or utilizing the information output of the system. For many problems, the user and the computer form a combined system with results obtained through a set of interactions between the computer and the user. User-machine interaction is facilitated by operation in which the user’s input-output device (usually a visual display terminal) is connected to the computer. The computer can be a personal computer serving only one user or a large computer that

低压配电系统的工厂供电课程设计知识分享

低压配电系统的工厂供电课程设计 姓 名 学 号 院、系、部 电气工程系 班 号 完成时间 2012年6月18日 ※※※※※※※※※ ※ ※ ※ ※ ※ ※ 2009级 工厂供电课程设计

设计任务书 一、设计内容： (1)由总降压变电所的配出电压和用电设备的电压要求，参考国际规定的标准电压等级确定车间变电所的电压级别。 (2)计算负荷采用需用的系数法，计算出单台设备支线、用电设备组干线和车间变电所低压母线和进线的计算负荷。 (3)由计算负荷结果，确定补偿方式，计算出补偿容量，选择电容器个数和电容柜个数。 (4)按对负荷可靠性要求，确定车间变电所电气主接线。 (5)按车间变电所低压母线的计算负荷，确定变电器的容量和台数。 (6)导线截面积的选择，支线和干线按发热条件选择，进线电缆按经济电缆密度选择，按允许发热，电压损耗进行校验。 (7)短路电流计算，绘制计算电路和等值电路图，确定短路点，计算出各短路点短路电流值及短路容量。 (8)车间变电所低压母线按发热条件选择，按短路的热合力校验。 (9)按国家规定的标准符号和图符，用CAD画出车间变电所的电气主接线图、车间配电系统和配电平面图。 二、设计条件： (1)机加车间符合全部为三级负荷，对供电可靠性要求不高。

(2)车间平面布置图如下图所示 （3）车间电气设备各细表如下表所示 设备代号设备名称台数单台容量（kW）效率功率因数启动倍数备注1~3 普通车床C630-1 3 7.6 0.88 0.81 6 4 内圆磨床M2120 1 7.2 5 0.88 0.83 6 5，16 砂轮机S3SL-300 2 1.5 0.92 0.82 6.5 6 平面磨床M7130 1 7.6 0.88 0.82 6 7~9 牛头刨床B6050 3 4 0.87 0.82 6 11，12 普通车床C6140 2 6.125 0.89 0.81 6 13~15 普通车床C616 3 4.6 0.90 0.81 6 17，18 单臂龙门刨床B1012 2 67.8 0.86 0.81 2.5 19 龙门刨床B2016 1 66.8 0.86 0.81 2.5 20，21 普通车床C630 2 10.125 0.88 0.81 6 22 立式钻床Z535 1 4.625 0.90 0.80 6 23 立式车床C534J1 1 80 0.86 0.80 3 24 摇臂钻床Z35 1 8.5 0.87 0.82 5.5

基于单片机的步进电机控制系统设计外文翻译

毕业设计(论文)外文资料翻译 学院：机械工程学院 专业：机械设计制造及其自动化 姓名： 学号：XXXXXXXXXX 外文出处：《Computational Intelligence and (用外文写)Design》 附件： 1.外文资料翻译译文；2.外文原文。 注：请将该封面与附件装订成册。

附件1：外文资料翻译译文 基于微型计算机的步进电机控制系统设计 孟天星余兰兰 山东理工大学电子与电气工程学院 山东省淄博市 摘要 本文详细地介绍了一种以AT89C51为核心的步进电机控制系统。该系统设计包括硬件设计、软件设计和电路设计。电路设计模块包括键盘输入模块、LED显示模块、发光二极管状态显示和报警模块。按键可以输入设定步进电机的启停、转速、转向,改变转速、转向等的状态参数。通过键盘输入的状态参数来控制步进电机的步进位置和步进速度进而驱动负载执行预订的工作。运用显示电路来显示步进电机的输入数据和运行状态。AT89C51单片机通过指令系统和编译程序来执行软件部分。通过反馈检测模块，该系统可以很好地完成上述功能。 关键词：步进电机，AT89C51单片机，驱动器，速度控制 1概述 步进电机因为具有较高的精度而被广泛地应用于运动控制系统，例如机器人、打印机、软盘驱动机、绘图仪、机械式阀体等等。过去传统的步进电机控制电路和驱动电路设计方法通常都极为复杂，由成本很高而且实用性很差的电器元件组成。结合微型计算机技术和软件编程技术的设计方法成功地避免了设计大量复杂的电路，降低了使用元件的成本，使步进电机的应用更广泛更灵活。本文步进电机控制系统是基于AT89C51单片机进行设计的，它具有电路简单、结构紧凑的特点，能进行加减速，转向和角度控制。它仅仅需要修改控制程序就可以对各种不同型号的步进电机进行控制而不需要改变硬件电路，所以它具有很广泛的应用领域。 2设计方案 该系统以AT89C51单片机为核心来控制步进电机。电路设计包括键盘输入电路、LED显示电路、发光二极管显示电路和报警电路，系统原理框图如图1所示。 At89c51单片机的P2口输出控制步进电机速度的时钟脉冲信号和控制步进电机运转方向的高低电平。通过定时程序和延时程序可以控制步进电机的速度和在某一

企业人力资源管理系统分析与设计 外文翻译

Enterprise Human Resources Management System Design And Implementation Abstract: Human resource management system is the core content of modern enterprise management. With the rapid development of the computer information technology and unprecedented prevalence of electronic commerce mode，the competition between enterprises is turning from visible economic markets to the network. Developing the human resource management system supported by computer technology，network technology and information technology can not only improve the skill of human resource management and the efficiency of the enterprises but also make human resource management modern and decision sciencefic,Modern human resource management uses B/S mode to avoid C/S modes short coming of difficult in maintdning and reusing.According to the functional requirements of the actual project,this article specificly state the analysis of system,the general desigin of the system,the detail design of system and the practice of the system. The development of the system is the practice of MVC design ideas, maing using the Jsp+Servlet+JavaBean form of development.Jsp is the practice of MVC design ideas’view,in charge of receiving/responding the request of the customer.Servlet mainly responsible for the core business control of the whole system is the practice of the vontroller of MVC design idea to take charge of the statistics and rules of the whole system. In the practice of the system, somr open-source projrcts,such as the Ajax technique,JfreChart statements,fileupload technology,has been used. Using the modern human resource management theropy and analysising the actual situation, comparing the current situation of human resource management system, a huaman resource contents of management system basied on the Internet/Intranet has been designed. The main management,attendance management training more efficient statistics. Keywords:human resource management; B/S mode; Open-source projects; MVC mode. 摘要 人力资源管理系统是现代企业管理的核心内容。随着计算机信息技术的高速发展，电子商务模式的空前盛行，企业之间的竞争也从有形的经济市场转向了网络。开发以计算机技术、网络技术、信息技术支持的现代人力资源管理系统，既能提高企业人力资源管理的技术含量和企业的办事效率，也能使人力资源管理能够进入现代化、决策科学化的进程。现代人力资源管理系统采用了B/S模式，可以避免C/S模式的重用性差、维护难度高的缺点和

文献综述和外文翻译撰写要求与格式规范

本科毕业论文（设计）文献综述和外文翻译 撰写要求与格式规范 一、毕业论文（设计）文献综述 （一）毕业论文（设计）文献综述的内容要求 1．封面：由学院统一设计，普通A4纸打印即可。 2.正文 综述正文部分需要阐述所选课题在相应学科领域中的发展进程和研究方向，特别是近年来的发展趋势和最新成果。通过与中外研究成果的比较和评论，说明自己的选题是符合当前的研究方向并有所进展，或采用了当前的最新技术并有所改进，目的是使读者进一步了解本课题的意义。文中的用语、图纸、表格、插图应规范、准确，量和单位的使用必须符合国家标准规定，引用他人资料要有标注。 文献综述字数在5000字以上。 正文前须附500字左右中文摘要，末尾须附参考文献。 参考文献的著录按在文献综述中出现的先后顺序编号。 期刊类文献书写方法:[序号]作者（不超过3人，多者用等表示）.题（篇）名[J].刊名,出版年,卷次（期次）:起止页次.

图书类文献书写方法:[序号]作者.书名[M].版本.出版地:出版者,出版年:起止页次. 论文集类文献书写方法:[序号]作者.篇名[C].论文集名.出版地:出版者,出版年:起止页次. 学位论文类书写方法:[序号]作者.篇名[D].出版地:单位名称,年份. 电子文献类书写方法:[序号]主要责任者. 题名:其他题名信息[文献类型标志/文献载体标志 ]出版地:出版者,出版年（更新或修改日期）[引用日期].获取和访问途径. 参考文献篇数应符合学院毕业论文（设计）工作的要求。 （二）毕业论文（设计）文献综述撰写与装订的格式规范 第一部分：封面 1.封面：由学院统一设计，“本科生毕业论文（设计）”根据作业实际明确为“论文”或“设计”，其它文本、表格遇此类情况同样处理。 第二部分：文献综述主题 1.中文摘要与关键词 摘要标题（五号，宋体，顶格，加粗）

房地产信息管理系统的设计与实现 外文翻译

本科毕业设计(论文)外文翻译 译文： ASP ASP介绍 你是否对静态HTML网页感到厌倦呢？你是否想要创建动态网页呢？你是否想 要你的网页能够数据库存储呢？如果你回答：“是”，ASP可能会帮你解决。在2002年5月，微软预计世界上的ASP开发者将超过80万。你可能会有一个疑问什么是ASP。不用着急，等你读完这些，你讲会知道ASP是什么，ASP如何工作以及它能为我们做 什么。你准备好了吗？让我们一起去了解ASP。 什么是ASP? ASP为动态服务器网页。微软在1996年12月推出动态服务器网页,版本是3.0。微软公司的正式定义为:“动态服务器网页是一个开放的、编辑自由的应用环境,你可以将HTML、脚本、可重用的元件来创建动态的以及强大的网络基础业务方案。动态服务器网页服务器端脚本,IIS能够以支持Jscript和VBScript。”(2)。换句话说,ASP是微软技术开发的,能使您可以通过脚本如VBScript Jscript的帮助创建动态网站。微软的网站服务器都支持ASP技术并且是免费的。如果你有Window NT4.0服务器安装,你可以下载IIS（互联网信息服务器）3.0或4.0。如果你正在使用的Windows2000,IIS 5.0是它的一个免费的组件。如果你是Windows95/98,你可以下载(个人网络服务器(PWS),这是比IIS小的一个版本，可以从Windows95/98CD中安装，你也可以从微软的网站上免费下载这些产品。 好了，您已经学会了什么是ASP技术，接下来，您将学习ASP文件。它和HTML文 件相同吗？让我们开始研究它吧。 什么是ASP文件？ 一个ASP文件和一个HTML文件非常相似，它包含文本，HTML标签以及脚本，这些都在服务器中，广泛用在ASP网页上的脚本语言有2种，分别是VBScript和Jscript，VBScript与Visual Basic非常相似，而Jscript是微软JavaScript的版本。尽管如此，VBScript是ASP默认的脚本语言。另外，这两种脚本语言，只要你安装了ActiveX脚本引擎，你可以使用任意一个，例如PerlScript。 HTML文件和ASP文件的不同点是ASP文件有“.Asp”扩展名。此外，HTML标签和ASP代码的脚本分隔符也不同。一个脚本分隔符,标志着一个单位的开始和结束。HTML标签以小于号(<)开始(>)结束，而ASP以<%开始，%>结束，两者之间是服务端脚本。

某工厂供电系统的设计毕业论文

某工厂供电系统的设计毕业论文 目录 摘要 ............................................................... I Abstract .............................................................. II 目录 ............................................................. III 第一章引言 .................................................... - 1 - 1.1 选题的背景及意义 ........................................... - 1 - 1.1.1 选题的背景 ........................................... - 1 - 1.1.2 选题的意义 ........................................... - 1 - 1.2 工厂供电设计的要求及原则 ................................... - 1 - 1.3 本设计的主要要求 ........................................... - 2 - 第二章冶金厂各变电所负荷计算和无功补偿计算 ........................ - 4 - 2.1 负荷计算的目的及其计算方法 ................................. - 4 - 2.1.1 负荷计算的目的 ....................................... - 4 - 2.1.2负荷计算的计算方法.................................... - 4 - 2.2 冶金厂各个车间及整个工厂计算负荷的确定 ..................... - 5 - 2.2.1 380V车间计算负荷的确定.............................. - 5 - 2.2.2 6KV车间负荷计算..................................... - 6 - 2.2.3 冶金厂总负荷列表 .................................... - 7 - 2.3 无功功率补偿方式及其计算 ................................... - 8 - 2.3.1 无功补偿的方式 ....................................... - 8 - 2.3.2 380V车间无功补偿的计算............................... - 9 - 2.3.3 6kV侧无功补偿的计算................................. - 10 - 2.3.4 变压器损耗的计算 .................................... - 10 - 2.3.5 全厂计算负荷 ....................................... - 10 - 第三章冶金厂主变压器的选择 ....................................... - 12 - 3.1变压器台数和容量的选择原则................................. - 12 - 3.2 变压器台数及容量的选择 .................................... - 13 - 第四章冶金厂变电所的主接线的设计 ................................. - 14 -

速度控制系统设计外文翻译

译文 流体传动及控制技术已经成为工业自动化的重要技术，是机电一体化技术的核心组成之一。而电液比例控制是该门技术中最具生命力的一个分支。比例元件对介质清洁度要求不高，价廉，所提供的静、动态响应能够满足大部分工业领域的使用要求，在某些方面已经毫不逊色于伺服阀。比例控制技术具有广阔的工业应用前景。但目前在实际工程应用中使用电液比例阀构建闭环控制系统的还不多，其设计理论不够完善，有待进一步的探索，因此，对这种比例闭环控制系统的研究有重要的理论价值和实践意义。本论文以铜电解自动生产线中的主要设备——铣耳机作为研究对象，在分析铣耳机组各构成部件的基础上，首先重点分析了铣耳机的关键零件——铣刀的几何参数、结构及切削性能，并进行了实验。用电液比例方向节流阀、减压阀、直流直线测速传感器等元件设计了电液比例闭环速度控制系统，对铣耳机纵向进给装置的速度进行控制。论文对多个液压阀的复合作用作了理论上的深入分析，着重建立了带压差补偿型的电液比例闭环速度控制系统的数学模型，利用计算机工程软件，研究分析了系统及各个组成环节的静、动态性能，设计了合理的校正器，使设计系统性能更好地满足实际生产需要 水池拖车是做船舶性能试验的基本设备,其作用是拖曳船模或其他模型在试验水池中作匀速运动,以测量速度稳定后的船舶性能相关参数,达到预报和验证船型设计优劣的目的。由于拖车稳速精度直接影响到模型运动速度和试验结果的精度,因而必须配有高精度和抗扰性能良好的车速控制系统,以保证拖车运动的稳速精度。本文完成了对试验水池拖车全数字直流调速控制系统的设计和实现。本文对试验水池拖车工作原理进行了详细的介绍和分析,结合该控制系统性能指标要求,确定采用四台直流电机作为四台车轮的驱动电机。设计了电流环、转速环双闭环的直流调速控制方案,并且采用转矩主从控制模式有效的解决了拖车上四台直流驱动电机理论上的速度同步和负载平衡等问题。由于拖车要经常在轨道上做反复运动,拖动系统必须要采用可逆调速系统,论文中重点研究了逻辑无环流可逆调速系统。大型直流电机调速系统一般采用晶闸管整流技术来实现,本文给出了晶闸管整流装置和直流电机的数学模型,根据此模型分别完成了电流坏和转速环的设计和分析验证。针对该系统中的非线性、时变性和外界扰动等因素,本文将模糊控制和PI控制相结合,设计了模糊自整定PI控制器,并给出了模糊控制的查询表。本文在系统基本构成及工程实现中,介绍了西门子公司生产的SIMOREGDC Master 6RA70全数字直流调速装置,并设计了该调速装置的启动操作步骤及参数设置。完成了该系统的远程监控功能设计,大大方便和简化了对试验水池拖车的控制。对全数字直流调速控制系统进行了EMC设计,提高了系统的抗干扰能力。本文最后通过数字仿真得到了该系统在常规PI控制器和模糊自整定PI控制器下的控制效果,并给出了系统在现场调试运行时的试验结果波形。经过一段时间的试运行工作证明该系统工作良好,达到了预期的设计目的。 提升装置在工业中应用极为普遍,其动力机构多采用电液比例阀或电液伺服阀控制液压马达或液压缸,以阀控马达或阀控缸来实现上升、下降以及速度控制。电液比例控制和电液伺服控制投资成本较高,维护要求高,且提升过程中存在速度误差及抖动现象,影响了正常生产。为满足生产要求,提高生产效率,需要研究一种新的控制方法来解决这些不足。随着科学技术的飞速发展,计算机技术在液压领域中的应用促进了电液数字控制技术的产生和发展,也使液压元件的数字化成为液压技术发展的必然趋势。本文以铅电解残阳极洗涤生产线中的提升装置为研究

餐饮管理系统外文翻译文献

餐饮管理系统外文翻译文献(文档含中英文对照即英文原文和中文翻译) 英文： 1、China food industry development prospects analysis The catering industry in China as the tertiary industry is a traditional service industries, experienced reforming and opening starts, quantitative expansion, scale chain development and brand promotion strategy of 4phase, made make a spurt of progress in the development of. At present, the country has4 millions catering outlets. 2005/2006annual Chinese top 100 catering enterprises with total assets of about thirty-two billion yuan, total profit of about six billion yuan, employees about eight hundred thousand people, respectively, over the same period last year increased40.38%,28.84% and33.33% higher than that of the whole society, the catering industry average growth level. China's reform and opening up has gone through ups and downs in the30year, in the30 years of reforming and opening of China's catering industry along with the tide of reform has undergone three leap type development. In the past 30 years, China has experienced from fast food restaurants grabs beach China market to SARS impact, then to food safety ( tonyred event, apple events ), Chinese food and beverage industry in the impact, achieve sales growth.

本科毕业设计(论文)外文翻译基本规范

本科毕业设计（论文）外文翻译基本规范 一、要求 1、与毕业论文分开单独成文。 2、两篇文献。 二、基本格式 1、文献应以英、美等国家公开发表的文献为主（Journals from English speaking countries）。 2、毕业论文翻译是相对独立的，其中应该包括题目、作者（可以不翻译）、译文的出处（杂志的名称）（5号宋体、写在文稿左上角）、关键词、摘要、前言、正文、总结等几个部分。 3、文献翻译的字体、字号、序号等应与毕业论文格式要求完全一致。 4、文中所有的图表、致谢及参考文献均可以略去，但在文献翻译的末页标注：图表、致谢及参考文献已略去(见原文)。（空一行，字体同正文） 5、原文中出现的专用名词及人名、地名、参考文献可不翻译，并同原文一样在正文中标明出处。 二、毕业论文（设计）外文翻译 （一）毕业论文（设计）外文翻译的内容要求 外文翻译内容必须与所选课题相关，外文原文不少于6000个印刷符号。译文末尾要用外文注明外文原文出处。 原文出处：期刊类文献书写方法：[序号]作者（不超过3人，多者用等或et al表示）.题（篇）名[J].刊名（版本）,出版年，卷次（期次）：起止页次. 原文出处：图书类文献书写方法：[序号]作者.书名[M].版本.出版地：出版者,出版年.起止页次. 原文出处：论文集类文献书写方法：[序号]作者.篇名[A].编著者.论文集名[C]. 出版地：出版者，出版年.起止页次。 要求有外文原文复印件。 （二）毕业论文（设计）外文翻译的撰写与装订的格式规范 第一部分：封面

1.封面格式:见“毕业论文（设计）外文翻译封面”。普通A4纸打印即可。 第二部分：外文翻译主题 1.标题 一级标题，三号字，宋体，顶格，加粗 二级标题，四号字，宋体，顶格，加粗 三级标题，小四号字，宋体，顶格，加粗 2.正文 小四号字，宋体。 第三部分：版面要求 论文开本大小：210mm×297mm（A4纸） 版芯要求：左边距：25mm，右边距：25mm，上边距：30mm，下边距：25mm，页眉边距：23mm，页脚边 距：18mm 字符间距：标准 行距：1.25倍 页眉页角：页眉的奇数页书写—浙江师范大学学士学位论文外文翻译。页眉的偶数页书写—外文翻译 题目。在每页底部居中加页码。（宋体、五号、居中） 装订顺序是：封皮、中文翻译、英文原文复印件。

毕业设计外文翻译---控制系统介绍

英文原文 Introductions to Control Systems Automatic control has played a vital role in the advancement of engineering and science. In addition to its extreme importance in space-vehicle, missile-guidance, and aircraft-piloting systems, etc, automatic control has become an important and integral part of modern manufacturing and industrial processes. For example, automatic control is essential in such industrial operations as controlling pressure, temperature, humidity, viscosity, and flow in the process industries; tooling, handling, and assembling mechanical parts in the manufacturing industries, among many others. Since advances in the theory and practice of automatic control provide means for attaining optimal performance of dynamic systems, improve the quality and lower the cost of production, expand the production rate, relieve the drudgery of many routine, repetitive manual operations etc, most engineers and scientists must now have a good understanding of this field. The first significant work in automatic control was James Watt’s centrifugal governor for the speed control of a steam engine in the eighteenth century. Other significant works in the early stages of development of control theory were due to Minorsky, Hazen, and Nyquist, among many others. In 1922 Minorsky worked on automatic controllers for steering ships and showed how stability could be determined by the differential equations describing the system. In 1934 Hazen, who introduced the term “ervomechanisms”for position control systems, discussed design of relay servomechanisms capable of closely following a changing input. During the decade of the 1940’s, frequency-response methods made it possible for engineers to design linear feedback control systems that satisfied performance requirements. From the end of the 1940’s to early 1950’s, the root-locus method in control system design was fully developed. The frequency-response and the root-locus methods, which are the