接入层交换机配置脚本

sys
sysname flb_sw2

local-user winsion
password simple winsion
service-type ftp
service-type telnet
quit

user-interface vty 0 4
authentication-mode scheme
set authentication password simple winsion
quit

super password level 3 simple winsion



ftp server enable
telnet server enable
stp enable


vlan 105
name lan
quit

interface vlan 1
ip address 10.221.39.133 255.255.255.128
quit

port-group manual winsion1
group-member g1/0/1 to g1/0/20
stp edged-port enable
port link-mode access
port access vlan 105
quit

port-group manual winsion2
group-member g1/0/21 to g1/0/24
stp edged-port enable
port link-type trunk
port trunk permit vlan all
quit

port-group manual winsion0
group-member g1/0/25 to g1/0/28
stp edged-port enable
port link-type trunk
port trunk permit vlan all
quit

ip route-static 0.0.0.0 0.0.0.0 10.221.39.129


save force