(WPS) of the Manufacturer
Page 1 of 9
Company: XuZhou Liebherr Concrete Machinery Co.Ltd.
Address: No.10 Jingong Road,Xuzhou Economic Development Zone,221004,
Jangsu PR of China
Phone no.: +86 516 8779 7761 Fax no.: +86 516 8779 2300
E-mail: chunyuan.zhou@https://www.sodocs.net/doc/a2519113.html,
Telex no.:
Responsible welding supervisor: Zhou Chunyuan
Work/Work's
division:
Address:
Welding procedure specification (WPS)
WPS-No.: WPS-01Date: 2007-09-05 Test report (WPAR) no: No.20070801Rev. no.: 1.00
Welding process: 135 Welding position(s): PF
Parent material(s) spec.: Q345B (GB/T1591-1994)
Joint type: FW
Material thickness [mm]: 12 Outside diameter [mm]:
Method of preparation and
cleaning:
Grinding
Joint preparation details (sketch)
Welding details
Process Size of filler
metal Wire feed
speed
Travel
speed
[cm/min]
135 Φ1.2130-140 3.1-3.540-60
Filler metal
Manufacturer: ESAB/ ESAB AB,SWEDEN
Brand name: OK AristoRod 12.50 /G3Si1 / ER70S6
(WPS) of the Manufacturer
Page 2 of 9
Quality grade: 3YS
Classification: MAG welding solid wire for carbon steel
Any special baking or drying:
Gas
Shielding: M21 (82%Ar+18%CO2)Gas flow rate: 12-20 Backing: Gas flow rate:
Flux
Manufacturer:
Brand name:
Classification:
Any special baking or drying:
Tungsten electrode type/ :
Gouging/grinding:
Preheating temperature: Interpass temperature:
Post weld heat treatment and / or aging *
Time, temperature, method:
Heating and cooling rate:
Other information, e. g.*
Weaving (max. width of run):
Oscillation (amp, freq.,dwell time):
Pulse welding details:
Stand-off distance:
Plasma welding details:
Torch angle:
Welding over shop primer *
Brand name:
Dry film thickness:
Other:
Xuzhou / 2007-09-06 Zhou chunyuan
Place/Date Stamp Signature of Manufacturer’s Welding Supervisor
* If required