材料物性表fep140
常用金属材料密度表
材料名称密度(克/厘米3) 灰口铸铁6.6~7.4 白口铸铁7.4~7.7 可锻铸铁7.2~7.4 铸钢7.8 工业纯铁7.87 普通碳素钢7.85 优质碳素钢7.85 碳素工具钢7.85 易切钢7.85 锰钢7.81 15CrA铬钢7.74 20Cr、30Cr、40Cr铬钢7.82 38CrA铬钢7.8 铬钒、铬镍、铬镍钼、铬锰、硅、铬锰硅镍、硅锰、硅铬钢7.85 铬镍钨钢7.8 铬钼铝钢7.65 含钨9高速工具钢8.3 含钨18高速工具钢8.7 高强度合金钢7.82 轴承钢7.81 不锈钢 0Cr13、1Cr13、2Cr13、3Cr13、4Cr13、 Cr17Ni2、Cr18、9Cr18、Cr25、Cr28 7.75 0Cr18Ni9、1Cr18Ni9、Cr18Ni9Ti、2Cr18Ni9 Cr14、Cr17 7.7 4-0.3、4-4-4锡青铜8.9 1Cr18Ni11Si4A1Ti 7.52 7铝青铜7.8 19-2铝青铜 9-4、10-3-1.5铝青铜7.5 9-4、10-3-1.5铝青铜7.5 10-4-4铝青铜7.46 铍青铜8.3 3-1硅青铜8.47 1-3硅青铜8.6 1铍青铜8.8 0.5镉青铜8.9 0.5铬青铜8.9 1.5锰青铜8.8 5锰青铜8.6 白铜B5、B19、B30、BMn40-1.5 8.9 BMn3-12 8.4 BZN15-20 8.6 BA16-1.5 8.7 BA113-3 8.5 纯铝2.7 防锈铝LF2、LF43 2.68
LF3 2.67 LF5、LF10、LF11 2.65 LF6 2.64 LF21 2.73 硬铝LY1、LY2、LY4、LY6 2.76 LY3 2.73 LY7、LY8、LY10、LY11、LY14 2.8 LY9、LY12 2.78 LY16、LY17 2.84 锻铝LD2、LD30 2.7 LD4 2.7 灰铸铁HT100～HT350 6.6--7.4 白口铸铁S15、P08、J13等7.4--7.7 可锻铸铁KT30-6～KT270-2 7.2--7.4 铸钢ZG45、ZG35CrMnSi等7.8 工业纯铁DT1--DT6 7.87 普通碳素钢Q195、Q215、Q235、Q255、Q275 7.85 优质碳素钢05F、08F、15F 10、15、20、25、30、35、40、45、50 7.85 碳素工具钢T7、T8、T9、T10、T12、T13、T7A、T8A、T9A、T10A、T11A、T12A、T13A、T8MnA 7.85 易切钢Y12、Y30 7.85 弹簧钢丝Ⅰ、Ⅱ、Ⅱa、Ⅲ7.85 低碳优质钢丝Zd、Zg 7.85 锰钢20Mn、60Mn、65Mn 7.81 铬钢15CrA 20Cr、30Cr、40Cr 38CrA 7.74 7.82 7.80 铬钒钢50CrVA 7.85 铬镍钢12CrNi3A、20CrNi3A 37CrNi3A 7.85 铬镍钼钢40CrNiMoA 7.85 铬镍钨钢18Cr2Ni4WA 7.8 铬钼铝钢38CrMoA1A 7.65 铬锰硅钢30CrMnSiA 7.85 铬锰硅镍钢30CrMnSiNi2A 7.85 硅锰钢60Si2nMnA 7.85 硅铬钢70Si2CrA 7.85 高强度合金钢GC-4、GC11 7.82 高速工具钢W9Cr4V W18Cr4V 8.3 8.7 轴承钢GCr15 7.81 不锈钢0Cr13、1Cr13、2Cr13、3Cr13、4Cr13 Cr14、Cr17 Cr17Ni2、Cr18、9Cr18、Cr25、Cr28 0Cr18Ni9、1Cr18Ni9 1Cr18Ni9Ti、2Cr18Ni9 Cr18Ni11Nb 1Cr23Ni18、Cr17Ni3Mo2Ti 1Cr18Ni11Si4A1Ti
物性材料表
特性Feature 耐高温、耐冲击、高流动性、尺寸稳定。High temperature resistance, impact resistance, high liquidity, dimension stability. 用途Use 电子、电器零件、汽车部件等。Electronic, electrical parts, auto parts, etc. 注塑条件Injection conditions 预干燥温度Pre-drying temperature 预干燥时间Pre-drying time 进料区温度Feed zone temperature 压缩区温度Compression zone temperature 熔融区温度Melting zone temperature 喷嘴温度Nozzle Temperature 模具温度Mold 注射压力Injection pressure 物理机械性能Physical and mechanical properties 项目Project 单位unit 试验方法Test method 数值Value 密度Density 熔点Melting point 成型收缩率Mold Shrinkage 吸水率（24小时，23℃）Water Absorption (24 hours, 23 ℃) 熔融指数Melt Index 阻燃等级Flame Rating 拉伸断裂强度Tensile Strength 拉伸模量Tensile modulus 断裂伸长率Elongation at break 弯曲强度Bending 弯曲模量Bending modulus 悬臂梁（无缺口）冲击强度Izod (unnotched) impact strength 悬臂梁缺口冲击强度Izod notched impact strength 洛氏硬度Rockwell hardness 热变形温度（0.45MPa）Heat Deflection Temperature（0.45MPa） Dielectric Strength 绝缘破坏强度 Arc resistance 耐电弧性 Dielectric Constant 介电常数 Dielectric Losses 介电损耗 Characteristics 特性 平衡吸湿量Moisture Absorption at Equilibrium 线性成型收缩率，横向Linear Mould Shrinkage, Transverse 断裂伸长率Elongation at Break 屈服伸长率Elongation at Yield
PA10T材料物性表
P ROVISIONAL D ATA S HEET G RIVORY HT G RIVORY XE 4027 BLACK 9916 Product description Grivory XE 4027 black 9916 is a 30% glass-fibre reinforced flame retardant (UL 94 V-0) engineering thermoplastic material based on a semicrystalline, partially aromatic co-polyamide. Grivory XE 4027 black 9916 is free of halogens and red phosphorus. RoHS: Grivory XE 4027 black 9916 is in compliance with RoHS (2002/95/EC, Re-striction of Hazardous Substances). WEEE:Parts produced from Grivory XE 4027 black 9916 are not subject to "selec-tive treatment" according the Directive 2002/96/EC on Waste Electrical and Elec-tronic Equipment. ISO polymer designation: PA 10T/X ASTM designation: PPA, polyphthalamide The main distinguishing features of Grivory HT-PPA, when compared to other poly-amides, are its good performance at high temperatures providing parts which are stiffer, stronger, have better heat distortion and dimensional stability as well as excel-lent chemical resistance and low moisture absorption. Grivory XE 4027 black 9916 is especially suitable for injection moulded components in electrical and electronic applications which require a flame class acc. UL 94 V-0. The material is suitable for lead-free SMT reflow soldering acc. i.e. JEDEC J-STD-020C (peak temperature 260°C). Compo-nents conforming to JEDEC MSL1 are achievable.
中外金属材料对照表
常用国内外钢材牌号对照表 中国 美国 日本 德国 英国 法国 前苏联 国际标准化组织 GB AST JIS DIN 、DINEN BS 、BSEN NF 、NFEN ΓOCT ISO 630 品 名 牌号 牌号 牌号 牌号 牌号 牌号 牌号 Q195 Cr.B Cr.C SS330 SPHC SPHD S185 040 A10 S185 S185 CT1K П CTlC П CTl ПC Q215A Cr.C Cr.58 SS 330 SPHC 040 A12 CT2K П—2 CT2C П—2 CT2ПC —2 Q235A Cr.D SS400 SM400A 080A15 CT3K П—2 CT3C П—2 CT3ПC —2 E235B Q235B Cr.D SS400 SM400A S235JR S235JRGl S235JRG2 S235JR S235JRGl S235JRG2 S235JR S235JRGl S235JRG2 CT3K П—3 CT3C П—3 CT3ПC —3 E235B Q255A SS400 SM400A CT4K П—2 CT4C П—2 CT4ПC —2 普 通 碳 素 结 构 钢 Q275 SS490 CT5C П—2 CT5ПC —2 E275A
中国 美国 日本 德国 英国 法国 前苏联 国际标准化组织 GB AST JIS DIN 、DINEN BS 、BSEN NF 、NFEN ΓOCT IS0 630 品 名 牌号 牌号 牌号 牌号 牌号 牌号 牌号 08F 1008 1010 SPHD SPHE 040A10 80K П 10 1010 S10C S12C CKl0 040A12 XCl0 10 C101 15 1015 S15C S17C CKl5 Fe360B 08M15 XCl2 Fe306B 15 C15E4 20 1020 S20C S22C C22 IC22 C22 20 25 1025 S25C S28C C25 IC25 C25 25 C25E4 40 1040 S40C S43C C40 IC40 080M40 C40 40 C40E4 45 1045 S45C S48C C45 IC45 080A47 C45 45 C45E4 50 1050 S50C S53C C50 IC50 080M50 C50 50 C50E4 优 质 碳 素 结 构 钢 15Mn 1019 080A15 15r
Sabic DX10311原料物性表
L NP* Thermocomp* Compound DX10311A sia Pacific: COMMERCIAL DX10311 is 30% glass fiber reinforced, impact modified polycarbonate resin. High flow and good ductility. T YPICAL PROPERTIES 1 TYPICAL VALUE UNIT STANDARD M ECHANICAL T ensile Stress, brk, Type I, 5 mm/min 117M Pa A STM D 638T ensile Strain, brk, Type I, 5 mm/min 2.6%A STM D 638T ensile Modulus, 5 mm/min 8330M Pa A STM D 638F lexural Stress 190M Pa A STM D 790F lexural Modulus 7670M Pa A STM D 790T ensile Stress, break, 5 mm/min 119M Pa I SO 527T ensile Strain, break, 5 mm/min 2.7%I SO 527T ensile Modulus, 1 mm/min 8260M Pa I SO 527F lexural Stress, yield, 2 mm/min 182M Pa I SO 178F lexural Stress, break, 2 mm/min 181M Pa I SO 178F lexural Modulus, 2 mm/min 7720M Pa I SO 178I MPACT Charpy Impact, unnotched, 23°C 57k J/m2I SO 179/2C Izod Impact, unnotched, 23°C 752J /m A STM D 4812 Izod Impact, notched, 23°C 196J /m A STM D 256 Charpy Impact, notched, 23°C 20k J/m2I SO 179/2C T HERMAL H DT, 0.45 MPa, 3.2 mm, unannealed 128°C A STM D 648 CTE, -40°C to 40°C, flow 1.9E-051/°C A STM E 831 CTE, -40°C to 40°C, xflow 6.4E-051/°C A STM E 831P HYSICAL S pecific Gravity 1.42-A STM D 792M old Shrinkage, flow, 3.2 mm (5)0.1 - 0.3%S ABIC Method M old Shrinkage, xflow, 3.2 mm (5) 0.2 - 0.4% S ABIC Method Melt Volume Rate, MVR at 300°C/5.0 kg 37 c m3/10 min I SO 1133 1) 2) PLEASE CONTACT YOUR LOCAL SALES OFFICE FOR AVAILABILITY IN YOUR AREA DISCLAIMER : THE MATERIALS AND PRODUCTS OF THE BUSINESSES MAKING UP THE SABIC INNOVATIVE PLASTICS Source, GMD, Last Update: COMPANY, ITS SUBSIDIARIES AND AFFILIATES ("SABIC IP"), ARE SOLD SUBJECT TO SABIC IP' S STANDARD CONDITIONS OF SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT, PRINTED ON THE BACK OF ORDER ACKNOWLEDGMENTS AND INVOICES, AND AVAILABLE UPON REQUEST. ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN IN GOOD FAITH, SABIC IP MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (I) THAT THE RESULTS DESCRIBED HEREIN WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (II) AS TO THE EFFECTIVENESS OR SAFETY OF ANY DESIGN INCORPORATING SABIC IP MATERIALS, PRODUCTS, RECOMMENDATIONS OR ADVICE. EXCEPT AS PROVIDED IN SABIC IP' S STANDARD CONDITIONS OF SALE, SABIC IP AND ITS REPRESENTATIVES SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS OR PRODUCTS DESCRIBED HEREIN.Each user bears full responsibility for making its own determination as to the suitability of SABIC IP' s materials, products, recommendations, or advice for its own particular use. Each user must identify and perform all tests and analyses necessary to assure that its finished parts incorporating SABIC IP materials or products will be safe and suitable for use under end-use conditions. Nothing in this or any other document, nor any oral recommendation or advice, shall be deemed to alter, vary, supersede, or waive any provision of SABIC IP' s Standard Conditions of Sale or this Disclaimer, unless any such modification is specifically agreed to in a writing signed by SABIC IP. No statement contained herein concerning a possible or suggested use of any material, product or design is intended, or should be construed, to grant any license under any patent or other intellectual property right of SABIC Innovative Plastics Company or any of its subsidiaries or affiliates covering such use or design, or as a recommendation for the use of such material, product or design in the infringement of any patent or other intellectual property right * LNP is a trademark of the SABIC Innovative Plastics Company * Thermocomp is a trademark of the SABIC Innovative Plastics Company ? 1997-2011 SABIC Innovative Plastics Company.All rights reserved T ypical values only. Variations within normal tolerances are possible for variose colours.All values are measured at least after 48 hours s torage at 230C/50% relative humidity. All properties, except the melt volume rate are measured on injection m oulded samples.All samples are prepared according to ISO 294. O nly typical data for material selection purpose.Not to be used for p art or tool design. 3) T his rating is not intended to reflect hazards presented by this or any o ther material under actual fire conditions.4) O wn measurement according to UL. 5) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
锂电材料物性对比
电池材料厂家技术标准积累 深圳市贝特瑞 MSG-S(518) 负极石墨粒径：D10=9.764；D50=17.136um；D90=28.189；水分:0.039;碳含量:99.952;TAP密度;1.036 比表面 积:2.784；首次容量/效率:363.51/94.18 深圳市贝特瑞 518 负极石墨粒径：D10=9.862；D50=16.888um； D90=28.374；水分:0.04%; 碳含量:99.962; TAP密度;1.042% 比表面积:2.625；首次容量/效率:352.3/92.5% 深圳市贝特瑞 AG 负极石墨粒径：D10=7.137；D50=18.058um； D90=37.495；水分：0.035;碳含量：99.676;TAP密度：1.001 首次容量/效率:320.83/90.42% 深圳市贝特瑞 AG 负极石墨粒径：D10=7.53；D50=17.779um； D90=39.648；水分：0.041;碳含量：99.743;TAP密度：1.002 ，首次容量/效率:326.51/90.67% 深圳市贝特瑞 SAG-23 负极石墨粒径：D10=8.318；D50=21.097um； D90=47.119；水分：0.04；碳含量：99.925；TAP密度：1.021 ，比表面积:4.605；首次容量/效率:332.11/92.08 深圳市贝特瑞 818 负极石墨粒径：D10=11.453；D50=18.226um； D90=28.762；水分：0.036；碳含量：99.964;TAP密度：1.121 比表面积:1.947;首次容量/效率:364.63/95.29% 深圳市贝特瑞 818 负极石墨粒径：D10=10.859；D50=18.033um；
材料物性表
EXTRUSION APPLICATION
Introduction Responsible for a long line of accomplishments in outstanding engineering plastics, UBE NYLON products have won the trust and respect of users the world over. UBE NYLON – NYLON 6, NYLON COPOLYMERS – is in wide use throughout industry with their unique properties utilized to their fullest potential. UBE NYLON 6 has a number of excellent properties as follows: Excellent in impact strength and rigidity Having a smaller friction coefficient, thus excellent in abrasion resistance Excellent in resistance to oils, solvents and chemicals Superior in heat resistance Appropriate to mass production, contributing to cost reduction Summary 1. Introduction 2. Nomenclature 3. Monofilament Applications 4. Film Applications 5. TERPALEX Polyamide 6/66/12 Copolymer Nomenclature The first 2 digits in the code indicate the type of Polyamide. The third and fourth digits indicate the molecular weight level for 1000 series. In case of copolymer, the third digit shows the viscosity level. The co-polymerization ratio can be roughly calculated from the fourth digit multiplying by 5. “T” means the basic grade for monofilament application and the grade contain some additives for maintain good process stability and high trans-parency. In case of “MT”, means monomer con-taining grade offering good flexibility and softness. 10: Polyamide 6 homopolymer 50: Polyamide 6/66 copolymer 70: Polyamide 6/12 copolymer Ex. 1022FDX04: : c.a. 22 x 1,000 = 22,000 Ex. 5034MTX1: : level = 3 (high viscosity) : c.a. 80/20(4 x 5 = 20et%) : monomer-contain type 2 Introduction
金属材料硬度对照表
一、硬度简介： 硬度表示材料抵抗硬物体压入其表面的能力。它是金属材料的重要性能指标之一。一般硬度越高，耐磨性越好。常用的硬度指标有布氏硬度、洛氏硬度和维氏硬度。 1.布氏硬度(HB) 以一定的载荷(一般3000kg)把一定大小(直径一般为10mm)的淬硬钢球压入材料表面，保持一段时间，去载后，负荷与其压痕面积之比值，即为布氏硬度值(HB)，单位为公斤力/mm2 (N/mm2)。 2.洛氏硬度(HR) 当HB>450或者试样过小时，不能采用布氏硬度试验而改用洛氏硬度计量。它是用一个顶角120°的金刚石圆锥体或直径为1.59、3.18mm的钢球，在一定载荷下压入被测材料表面，由压痕的深度求出材料的硬度。根据试验材料硬度的不同，分三种不同的标度来表示： ?HRA：是采用60kg载荷和钻石锥压入器求得的硬度，用于硬度极高的材料(如硬质合金等)。 ?HRB：是采用100kg载荷和直径1.58mm淬硬的钢球，求得的硬度，用于硬度较低的材料(如退火钢、铸铁等)。 ?HRC：是采用150kg载荷和钻石锥压入器求得的硬度，用于硬度很高的材料(如淬火钢等)。 3 维氏硬度(HV) 以120kg以内的载荷和顶角为136°的金刚石方形锥压入器压入材料表面，用材料压痕凹坑的表面积除 以载荷值，即为维氏硬度HV值(kgf/mm2)。 ############################################################################################# 注： 洛氏硬度中HRA、HRB、HRC等中的A、B、C为三种不同的标准，称为标尺A、标尺B、标尺C。 洛氏硬度试验是现今所使用的几种普通压痕硬度试验之一，三种标尺的初始压力均为98.07N(合10kgf)，最后根据压痕深度计算硬度值。标尺A使用的是球锥菱形压头，然后加压至588.4N(合60kgf)；标尺B使用的是直径为1.588mm(1/16英寸)的钢球作为压头，然后加压至980.7N(合100kgf)；而标尺C使用与标尺A相同的球锥菱形作为压头，但加压后的力是1471N(合150kgf)。因此标尺B适用相对较软的材料，而标尺C适用较硬的材料。实践证明，金属材料的各种硬度值之间，硬度值与强度值之间具有近似的相应关系。因为硬度值是由起始塑性变形抗力和继续塑性变形抗力决定的，材料的强度越高，塑性变形抗力越高，硬度值也就越高。但各种材料的换算关系并不一致。本站《硬度对照表》一文对钢的不同硬度值的换算给出了表格，请查阅。 ##############################################################################################
常用材料的热物性参数
表1 各种金属的热物性值 温度 C 比热 cal/(g·C) 导热系数 cal/(cm·s· C) 密度(g/cm3)液相 线、固相线温度 (C) =7.88(20C) =7.3(1500C) =7.0(1600C) =7.86(15C) =7.86(15C) =7.85(15C) =7.85(15C) =7.83(15C)
续表1 各种金属的热物性值 温度 C 比热 cal/(g·C) 导热系数 cal/(cm·s· C) 密度(g/cm3)液相 线、固相线温度 (C) =7.73(15C) Ts=1488 T L=1497 =7.84(15C) T S=1420 T L=1520 =7.7(15C) 13.1Cr,0.5Ni T S=1399 T L=1454 =7.0(15C) 比热相对于 普通铸铁
=7.1(15C) 温度 C 比热 cal/(g·C) 导热系数 cal/(cm·s· C) 密度(g/cm3)液相 线、固相线温度 (C) =7.5~7.8(15C) =8.92 T S=T L=1083
s=2.70(15C) T S=T M=660.2 温度 C 比热 cal/(g·C) 导热系数 cal/(cm·s· C) 密度(g/cm3)液相 线、固相线温度 (C) s=1.74 T L=T S=651 s=6.09 T S=1395 T L=1427
表2 铸型的热物性计算公式
硅砂，干型，呋喃铸型600C以下 0.385<<0.494 0.0058 材料名称密度(克/厘米3) 灰口铸铁~ 白口铸铁~ 可锻铸铁~ 铸钢 工业纯铁 普通碳素钢 优质碳素钢 碳素工具钢 易切钢 锰钢 15CrA铬钢 20Cr、30Cr、40Cr铬钢 38CrA铬钢 铬钒、铬镍、铬镍钼、铬锰、硅、铬锰硅镍、硅锰、硅铬钢铬镍钨钢 铬钼铝钢 含钨9高速工具钢 含钨18高速工具钢 高强度合金钢 轴承钢 不锈钢 0Cr13、1Cr13、2Cr13、3Cr13、4Cr13、 Cr17Ni2、Cr18、9Cr18、Cr25、Cr28 0Cr18Ni9、1Cr18Ni9、Cr18Ni9Ti、2Cr18Ni9 Cr14、Cr17 、4-4-4锡青铜 1Cr18Ni11Si4A1Ti 7铝青铜 19-2铝青铜 9-4、铝青铜 9-4、铝青铜 10-4-4铝青铜 铍青铜 3-1硅青铜 1-3硅青铜 1铍青铜 镉青铜 铬青铜 锰青铜 5锰青铜 白铜B5、B19、B30、 BMn3-12 BZN15-20 BA113-3 纯铝 防锈铝LF2、LF43 LF3 LF5、LF10、LF11 LF6 LF21 硬铝LY1、LY2、LY4、LY6 LY3 LY7、LY8、LY10、LY11、LY14 LY9、LY12 LY16、LY17 锻铝LD2、LD30 LD4 灰铸铁HT100～HT350 白口铸铁S15、P08、J13等 可锻铸铁KT30-6～KT270-2 铸钢ZG45、ZG35CrMnSi等 工业纯铁DT1--DT6 普通碳素钢Q195、Q215、Q235、Q255、Q275 优质碳素钢05F、08F、15F 10、15、20、25、30、35、40、45、50 碳素工具钢T7、T8、T9、T10、T12、T13、T7A、T8A、T9A、T10A、T11A、T12A、T13A、T8MnA 易切钢Y12、Y30 弹簧钢丝Ⅰ、Ⅱ、Ⅱa、Ⅲ 低碳优质钢丝Zd、Zg 锰钢20Mn、60Mn、65Mn 铬钢15CrA 20Cr、30Cr、40Cr 38CrA 铬钒钢50CrVA 铬镍钢12CrNi3A、20CrNi3A 37CrNi3A 铬镍钼钢40CrNiMoA 铬镍钨钢18Cr2Ni4WA 铬钼铝钢38CrMoA1A 铬锰硅钢30CrMnSiA 铬锰硅镍钢30CrMnSiNi2A 硅锰钢60Si2nMnA 硅铬钢70Si2CrA 高强度合金钢GC-4、GC11 高速工具钢W9Cr4V W18Cr4V 轴承钢GCr15 不锈钢0Cr13、1Cr13、2Cr13、3Cr13、4Cr13 Cr14、Cr17 Cr17Ni2、Cr18、9Cr18、Cr25、Cr28 0Cr18Ni9、1Cr18Ni9 1Cr18Ni9Ti、2Cr18Ni9 Cr18Ni11Nb 1Cr23Ni18、Cr17Ni3Mo2Ti 1Cr18Ni11Si4A1Ti 2Cr13Ni4Mn9 3Cr13Ni7Si2 Product Data Sheet CHARACTERISTICS TEST METHOD Physical Properties Specific Gravity ASTM D792 1.20 1.20 Mould Shrinkage ASTM D9550.1-0.3%0.001-0.003in/in Mechanical Properties Tensile Strength ASTM D63890MPa 13050psi Flexural Strength ASTM D790125MPa 18125psi Flexural Modulus ASTM D7906500MPa 943ksi Notched Izod Impact Strength (3.2mm) ASTM D256 85 J/m 1.6 ft-lb/in Thermal Properties Heat Deflection Temperature @ 1.82MPa (264 psi) ASTM D648145°C 293°F Electrical Properties Surface Resistivity ASTM D2571E15ohms 1E15ohms Description: Glass Fiber Reinforced Polypropylene PPR 40G NC702 Product Code: 5218702Internal Code: NATURAL Colour: Maxxam TM NOMINAL VALUE (SI)NOMINAL VALUE (ENGLISH)Flammability Properties Flame Rating @ 0.8mm Internal HB HB Processing Conditions PP Barrel Temperature 200-240 °C 392-464°F Mould Temperature 30-60 °C 86-140°F Drying Temperature 80-85 °C 176-185°F Drying Time 2-3 Hour 2-3 Hour Injection Pressure Hold Pressure Screw Speed Back Pressure Rev #: 0, Revision Date: 6/8/2010 PRINTED IN SHENZHEN LHM 33587 Walker Road,Avon Lake,Ohio 44012, USA, Tel 1-440-930 1000 WHEN YOU HAVE QUESTION WITH ENGINEERING PLASTICS, WE COMPOUND THE ANSWER. No.1, Qihang Industrial Park,Haoxiang Road, Shajing Town, Baoan,Shenzhen, P.R.China,Tel:86-755-29692888MODERATE MED-HIGH MED-HIGH THIS IS NOT A PRODUCT SPECIFICATION LOW THE INFORMATION PRESENTED HEREIN IS PRESENTED IN GOOD FAITH AND TO THE BEST OF OUR KNOWLEDGE IS TRUE AND ACCURATE. IT IS INTENDED AS A GUIDE AND IS OFFERED FOR USE AT YOUR DISCRETION AND RISK. POLYONE DOES NOT GUARANTEE RESULT AND DISCLAIM ANY LIABILITY INCURRED IN CONNECTION WITH THE USE OF THE PRODUCTS DESCRIBED OR THE INFORMATION PRESENTED Tel: 86-755-29692888 Safety Data Sheet complies with:directive 91/155/EEC revision:2.0 ISO 11014-1:Safety data sheet for chemical products. revision date:02/02/1998date of issue: 26/02/1998 p 1. Product and company identification Product name:Stanyl ?Product code:TE250F3 Manufacturer: DSM Engineering Plastics P.O. Box 43,6130 AA Sittard The Netherlands Emergency number: The Netherlands +31 (0)46 4 76 55 55 2. Composition/Information on ingredients This chemical product is a preparation Chemical nature:(poly)amide PA 46CAS number:50327-22-5Components contributing to the hazard: The material contains Sb 2O 3 as a synergist with an average content of max. 7%. Sb 2O 3 is classified as a harmful (Xn) substance with a risk phrase R40 carcinogen class 3. However, the Sb 2O 3 is embedded in an impervious matrix of polymer and is therefore less biological available than the free Sb 2O 3 (see also Section 15). 3. Hazards identification Most important hazards:Hazard warning not required Specific hazards: Vapour and fumes released at elevated processing temperatures may be irritant for the eyes, the nose, the throat and the respiratory tract and in case of overexposure may cause nausea and headache. The material is not classified as being a dangerous preparation according to the EEC-Directive 88/379 and the subsequent amendments. See also Section 15.4. First-Aid measures Inhalation: When fumes of molten material have been inhaled;- Move person to fresh air as quickly as possible - rest in half upright position - loosen clothing - keep warm In case of respiratory problems move person to first aid station for medical treatment.Skin contact: Any molten material on the skin/burns should be cooled (off) as quickly as possible by means of cold water.Cover the wound with sterile cloth and move person to first aid station or hospital for medical treatment.Attention: never pull off the molten material from the wound.Eye contact: Any material entering the eye should be flushed out with copious volumes of water.Ingestion: No danger of toxicity, this material is biologically inactive (see also Section 11). 5. Fire-fighting measures Extinguishing media: Water, water/foam, CO 2, ABC fire extinguisher powder.Specific Hazards: Treat the material as a solid that can burn. Moulded parts or solid granules generally burn slowly with flaming drips.常用金属材料密度表
材料物性表
物性表