项目成本控制中英文对照外文翻译文献

中英文资料外文翻译文献

原文：

Project Budget Monitor and Control

.

With the marketing competitiveness growing, it is more and more critical in budget control of each project. This paper discusses that in the construction phase, how can a project manager be successful in budget control. There are many methods discussed in this paper, it reveals that to be successful, the project manager must concern all this methods.

1. INTRODUCTION

The survey shows that most projects encounter cost over-runs (Williams Ackermann, Eden, 2002,pl92). According to Wright (1997)'s research, a good rule of thumb is to add a minimum of 50% to the first estimate of the budget (Gardiner and Stewart, 1998, p251). It indicates that project is very complex and full of challenge. Many unexpected issues will lead the project cost over-runs. Therefore, many technologies and methods are developed for successful monitoring and control to lead the project to success. In this article, we will discuss in the construction phase, how can a project manager to be successful budget control.

2. THE CONCEPT AND THE PURPOSE OF PROJECT CONTROL AND MONITOR

Erel and Raz (2000) state that the project control cycle consists of measuring the status of the project, comparing to the plan, analysis of the deviations, and implementing any appropriate corrective actions. When a project reach the construction phase, monitor and control is critical to deliver

the project success. Project monitoring exists to establish the need to take corrective action, whilst there is still time to take action. Through monitoring the activities, the project team can analyze the deviations and decide what to do and actually do it. The purpose of monitor and control is to support the implementation of corrective actions, ensure projects stay on target or get project back on target once it has gone off target。

3. SETTING UP AN EFFICIENT CONTROL SYSTEM

For the purpose of achieving cost target, the manager need to set up an efficient management framework including: reporting structure, assessing progress, and communication system. The employees' responsibility and authority need to be defined in the reporting structure. The formal and informal assessing progress can help getting a general perspective between reality and target. It is significant to help identify what is the risk and should be monitored and controlled. Project success is strongly linked to communication. The efficient communication system benefit for teamwork and facilitate problem solving ( Diallo and Thuillier, 2005 ).

4. COST MONITOR AND CONTROL

4.1 Ranking the priority of monitoring

In construction phase, many activities are carried out based on the original plan. It is need to know what kind of activities or things are most likely to lead the project delay and disruption. Therefore, the first step is ranking the priority of the activities. Because the duration of a project is determined by the total time of activities on critical path, any delay in an activity on the critical path will cause a delay in the completion date for the project (Ackermann Eden, Howick and Williams,2000,p295). Therefore, the activities on critical path should firstly to be monitored and controlled. Secondly, monitoring the activities with no free float remaining, a delay in any activity with no free float will delay some subsequent activity inevitably. These subsequent delays will discomfit the resource schedule significantly. Some resources are unavailable because they are committed elsewhere. Thirdly, monitoring the activities with less than a specified float, because if an activity has very little float, it might use up the time before control decision is made once such an activities has a variance with the target. Fourthly, managers should monitor high risky activities. High risky activities are most likely to overspend. Fifthly, managers should monitor

the activities using critical resource. Some resource is critical because they are very expensive or limited (Cotterell and Hughes, 1995).

4.2Methods of cost control

The main cost of a project includes staff cost, material cost and delay cost. To control these cost, managers should first set up a cost control system to:

a) Allocate responsibilities for administration and analysis of financial data

b) Ensure all costs are properly allocated against project codes

c) Ensure all costs are genuinely in pursuit of project activities

d) Check that other projects are not using the budget.

Then, managers should monitor and control change to the project budget. It means the following things:

a) Concerned with key factors that cause changes to the budget

b) Controlling actual cost changes as they occur

- Monitor cost performance to detect variances

- Record all appropriate changes accurately in the cost baseline

- Preventing incorrect, unauthorized changes being included in the cost baseline

- Determine positive and negative variances

- Integrated with all other control processes (scope, change, schedule, quality) As a project is dynamic, sometimes the project managers know the project is going out off target by monitoring, but don't know the best action to take. In this circumstance, net present value (NPV) should be used as an ongoing monitor and control mechanism, because NPV takes account of the time element and discounts future cash flows, it is the result of the time effect on cash

4.3 Change monitor and control

Voropajev (1998) states that dynamic changes of project environment will influence the process of project implementation, the project itself and may cause heightened risk. When carried out some activities, the methods different from that in the original plan must be used to keep the process moving forward (as experienced under practice). Therefore, changes are inevitable and need to be managed during project life-cycle (Voropajev. 1998,p 16- 17) .An effective change control system should be established to ensure change

procedure is clear and unambiguous and easy for employee to request a change. And the following things need to be concerned:

a) Monitoring and forecasting most probable changes Key factors that generate change to ensure good results; make sure that change must be checked by suitable person.

b) Changes should take place once it is approved and be monitored to check whether it worked as expected

c) All changes in project should be recorded in the project documentation (Voropajev, 1998,pl8).

5. CONCLUSION

This article shows the best methods of budget control. First, an efficient control system must be set up. Secondly, It is required to recognize and rank the important factors affecting budget target. Thirdly, manager should combine different control techniques to reach the success of a project.

项目成本减少与控制

随着市场竞争的激烈性越来越大，在每一个项目中，进行成本控制越发重要。本文论述了在施工阶段，项目经理如何成功地控制项目预算成本。本文讨论了很多方法。它表明，要取得成功，项目经理必须关注这些成功的方法。

1.简介

调查显示，大多数项目会碰到超出预算的问题(Williams Ackermann, Eden, 2002,pl92)。据Wright（1997）的研究，一个好的经验法则就是相比首次成本预算至少会增加50%(Gardiner and Stewart, 1998, p251)。这表明，项目是非常复杂并且充满挑战的。很多意想不到的因素会导致项目成本的增加。因此，许多科学技术和方法被应用于监测和控制成本来促使项目的成功。在这篇文章中，我们将讨论在施工阶段，项目经理如何才能成功控制预算成本。

2.项目控制和监测的概念和目的

Erel and Raz (2000)指出项目控制周期包括测量成本是实际情况，将施工成本的实际值和计划值进行比较，对比较结果进行分析，并采取适当的措施来纠正偏差。项目在施工阶段的监测和控制对于项目的成功是至关重要的。为了采取正确的纠偏措施需要建立项目监测机制，同时这样做也可以有时间来采取措施。通过监测手段，项目团队可以分析偏差产生的原因以及决定纠偏措施并采取行动。监控的目的就是纠偏措施的实施，确保项目控制在计划目标内或者使已经偏离计划的回到目标范围内。

3.建立一个有效的控制体系

为了实现预算成本的目标，项目管理者需要建立一个高效的管理框架，包括：报告的结构，评估的进展情况以及沟通体系。在报告结构中，雇员的责任和权力应该要清楚地被定义。正式的和非正式的评估可以帮助实际和目标之间大体上保持一致，且这对于确定什么是风险以及哪些需要被监测和控制是非常有帮助的。项目成功与良好的沟通密切相关，一个高效率的沟通体系有利于团队协作并促进问题的解决( Diallo and Thuillier, 2005)。

4.成本费用的检测和控制

4.1对检测的优先顺序进行排序

在施工阶段，很多施工活动是基于原来的计划。它需要清楚什么样的活动或者哪些东西是最有可能导致项目延误和不受控制的。因此，第一步就是要对这些活动进行优先排序。由于项目的工期是由关键路径上的关键工作的总时间决定

的，任何关键路径上工作的延迟将导致项目工期的拖延(Ackermann Eden, Howick and Williams,2000,p295)。因此，关键路径上的工作应该首先进行检测和控制。其次，检测没有自由时差浮动的工作，任何没有自由时差工作的延误将导致其后续工作的拖延，这些后续工作的延误将对资源分配安排带来影响，有些资源被分配到特定的工作是不可以变更利用的。第三，检测具有较少浮动时间的工作，因为，如果一个工作具有非常少的浮动时间，那么当它偏离目标的时候很有可能在还没有采取控制措施前就将浮动时间用完了。第四，项目管理者应该检测高风险活动，高风险活动最有可能超支。第五，管理者应该检测项目活动中使用的关键资源，有些资源由于是非常昂贵和有限的而至关重要(Cotterell and Hughes, 1995)。

4.2成本控制的方法

一个项目的主要费用包括员工成本、材料成本以及工期延误的成本。为了控制这些成本费用，项目管理者首先应该建立一个成本控制系统：

a)为财务数据的管理和分析工作落实责任人员

b)确保按照项目的结构来合理分配所有的成本

c)确保所有成本都是项目进展过程中各项活动的真实支出

d)检查其它工程项目没有使用此项目预算

然后，项目管理者应该对项目预算进行监督和控制变更。这意味着以下几点：

a)关注可以引起成本变化的主要因素

b)控制实际成本的变化

--监测成本发生情况来发现它的变化

--在成本控制线上准确地记录所有恰当的成本变动

--为防止出现错误，没有经过允许的成本变化也应该体现在成本控制线上

--确定积极地和消极的成本变化

--与其它控制目标（范围、变更、进度、质量）相结合

由于一个工程项目是动态变化的，有时项目经理通过监测知道项目成本正在偏离预算，但是却不知道采取什么措施来控制。在这种情况下，净现值（NPV）能够被用来作为一种持续监控的方法，因为净现值考虑了时间的因素来对未来现金流折现，它是现金流考虑时间价值影响后的结果。

4.3变化的检测和控制

Voropajev (1998)指出，施工环境的动态变化将会影响项目的实施过程、项目本身以及增加项目风险的可能性。当在开展施工活动的时候，不同于原计划的各种方法必须被应用来保持项目向前推进（根据实践经验）。因此，变化是不可避免的，需要在项目的整个生命周期过程中管理和控制变化(Voropajev. 1998,p

16- 17)。为了确保变更程序是明确和毫不含糊的以及方便施工人员提出要求发生改变，应该建立一个有效的变更控制体系。可以从以下几个方面考虑：

a) 为确保良好的结果，应检测和预测最有可能发生变更的主要因素，应该保证变更必须由合适的人员检查

b）一旦被批准，变更应该发生并对此进行监测以检查是否按预期工作

c)项目的所有变更应该被记录在项目文件资料中(Voropajev, 1998,pl8)

5.结论

本文介绍了控制预算的最佳方法。首先，必须建立一个高效率的监管控制体系；其次，它必须包括影响成本预算目标的主要因素并将它按照重要性排序；第三，项目管理者应该结合不同的科学控制方法以达到项目的成功。

外文翻译之二

The Contractor's Role in Building Cost Reduction After

Design

It has become evident from recent news articles that inflationary pressures and increased construction activity are causing many building projects to come in well over owner's budgets. This trend has increased dramatically over the past few years, as much of the construction industry has been impacted by an unprecedented increase in the cost of construction. The historical rate of increase in construction cost has been under five percent per year, as reported by the Engineering News Record. Over the last few years, the industry has seen a significant increase from historical escalation rates, up to 10-15 percent per year in many regions of the US. These increases have been caused by a variety of factors, including the following.

? Shortage of steel resulting from rapid growth in China.

? Demand for materials in the US resulting from increased hurricane damage. ? Rising oil prices leading to higher manufacturing and transportation cost. ? Rising labor cost because of increased construction activity .

To be successful in having over budget projects awarded, the building contractor has had to take a proactive role in working with owners and design teams to reduce project cost to amounts that owners are able to award. This cost reduction is normally accomplished through the following methods.

? value engineering;

? scope reduction;

Value Engineering

Value engineering (VE) has been defined as a systematic method to improve the value of goods and services by using an examination of function. Value, as defined, is the ratio of function to cost. Value can therefore be increased by either improving the function or reducing the cost.

It is a primary tenet of value engineering that quality not be reduced as a consequence of pursuing value improvements . VE is a process originating at General Electric Company (GE) during World War II. Because of shortages of skilled labor, raw materials, and component parts, engineers at GE

looked for acceptable alternates and often found substitutions that resulted in reduced costs and/or product improvement.

GE developed a systematic process that they called value analysis. Over the years the name gradually changed to VE. The basic steps of VE include the following：

? Information gathering: project requirements defined, function analysis.

? Alternates: various ways of meeting the requirements and functions.

? Evaluation: assessment of alternates on how well they meet requirements and costs savings.

? Presentation: selection of best alternatives to be presented to client for decisions.

True VE evaluates life cycle costs such as initial cost, maintenance cost, operational cost, life span, time value of money, replacement cost, and frequency of replacement. VE can be undertaken at any stage of the building design process; however, it is most effective in the early stages, since it is less costly to make changes to preliminary documents .

Scope Reduction

Scope reduction involves identifying areas of the project scope of work that can be reduced in quality, quantity, or both in a manner that is acceptable to the owner.

Scope reduction items of work often consist of material or equipment substitutions that lower the cost of the project, but may not be an equal substitute. An example of quantity scope reduction would be to reduce the guttering system on a pitched roof from the entire roof perimeter to entrances only. A quality scope reduction example would be to provide vinyl composition floor tiles (VCT) in lieu of ceramic floor tiles.

After a project has been determined to be out of budget because of high bids, the project is normally either cancelled, redesigned and re-bid, or negotiations are held with the low bidder to reach an acceptable contract amount. For the building contractor that is selected for negotiations, this is an opportunity to move toward project award and to also build a relationship of trust and openness with the owner and design team that could lead to future projects.

First, the building contractor should meet with the owner and design team

to fully understand the owners project requirements, priorities, life cycle considerations, and budget.

Next, the building contractor's role is to use his estimating and construction expertise to analyze various components and systems within the project for alternate solutions. The contractor should also bring in key subcontractors and suppliers who are often able to identify alternate materials and/or systems within their specialties. Each division of work should be examined and evaluated for VE solutions. In past years, this process and service was considered part of the building contractors overhead. However, in today's market, some contractors will negotiate rates and be reimbursed for the time and effort that they spend in this process in the event that the

project is not awarded to them.

The work breakdown structure (WBS) can be a helpful tool to the building contractor in analyzing the various components and systems within a building project. The WBS is a tree-type structure of functional systems used to classify the project on a level-by-level basis . This breakdown structure facilitates the evaluation of each system of the project from the building foundations to the completed sitework.

Questions to Ask or Areas and/to Consider by WBS

This section provides a list of areas for the building contractor to examine and/or questions to ask in the WBS system level format for cost saving alternatives. Some of these changes can be accomplished

without major re-design cost and incorporated into the construction documents in the form of an addendum. Other changes listed would require extensive re-design and time delays.

SUBSTRUCTURE

—Have alternate types of foundation system been considered?

? wood piles in lieu of precast;

? drilled caissons vs. piles;

? mat foundations in place of piles or caissons.

—Evaluate sand base in place of gravel or stone under slab on grade. SUPERSTRUCTURE

—Have alternate types of building structures been evaluated?

? structural steel, precast concrete, cast in place concrete, light gauge steel

中英文参考文献格式

中文参考文献格式 参考文献（即引文出处）的类型以单字母方式标识： M——专著，C——论文集，N——报纸文章，J——期刊文章，D——学位论文，R——报告，S——标准，P——专利；对于不属于上述的文献类型，采用字母“Z”标识。 参考文献一律置于文末。其格式为： （一）专著 示例 [1] 张志建.严复思想研究[M]. 桂林：广西师范大学出版社，1989. [2] 马克思恩格斯全集：第1卷[M]. 北京：人民出版社，1956. [3] [英]蔼理士.性心理学[M]. 潘光旦译注.北京：商务印书馆，1997. （二）论文集 示例 [1] 伍蠡甫.西方文论选[C]. 上海：上海译文出版社，1979. [2] 别林斯基.论俄国中篇小说和果戈里君的中篇小说[A]. 伍蠡甫.西方文论选：下册[C]. 上海：上海译文出版社，1979. 凡引专著的页码，加圆括号置于文中序号之后。 （三）报纸文章 示例 [1] 李大伦.经济全球化的重要性[N]. 光明日报，1998-12-27，（3） （四）期刊文章 示例 [1] 郭英德.元明文学史观散论[J]. 北京师范大学学报（社会科学版），1995（3）. （五）学位论文 示例 [1] 刘伟.汉字不同视觉识别方式的理论和实证研究[D]. 北京：北京师范大学心理系，1998. （六）报告 示例 [1] 白秀水，刘敢，任保平. 西安金融、人才、技术三大要素市场培育与发展研究[R]. 西安：陕西师范大学西北经济发展研究中心，1998. （七）、对论文正文中某一特定内容的进一步解释或补充说明性的注释，置于本页地脚，前面用圈码标识。 参考文献的类型 根据GB3469-83《文献类型与文献载体代码》规定，以单字母标识： M——专著（含古籍中的史、志论著） C——论文集 N——报纸文章 J——期刊文章 D——学位论文 R——研究报告 S——标准 P——专利 A——专著、论文集中的析出文献 Z——其他未说明的文献类型 电子文献类型以双字母作为标识： DB——数据库 CP——计算机程序 EB——电子公告

企业成本控制外文翻译文献

企业成本控制外文翻译文献(文档含英文原文和中文翻译)

译文： 在价值链的成本控制下减少费用和获得更多的利润 摘要： 根据基于价值链的成本管理理念和基于价值的重要因素是必要的。首先，必须有足够的资源，必须创造了有利的价值投资，同时还需要基于客户价值活动链，以确定他们的成本管理优势的价值链。其次，消耗的资源必须尽量减少，使最小的运营成本价值链和确保成本优势是基于最大商业价值或利润，这是一种成本控制系统内部整个视图的创建和供应的具实践，它也是一种成本控制制度基于价值链，包括足够的控制和必要的资源投资价值的观点，创建和保持消费的资源到合理的水平，具有价值的观点主要对象的第一个因素是构造有利的价值链，从创造顾客价值开始；第二个因素是加强有利的价值链，从供应或生产客户价值开始。因此它是一个新型的理念，去探索成本控制从整个视图的创建和供应的商品更盈利企业获得可持续的竞争优势。 关键词：成本控制，价值链，收益，支出，收入，成本会计 1、介绍 根据价值链理论，企业的目的是创造最大的顾客价值；和企业的竞争优势在于尽可能提供尽可能多的价值给他们的客户，作为低成本可能的。这要求企业必须首先考虑他们是否能为顾客创造价值，和然后考虑在很长一段时间内如何创造它。然而，竞争一直以“商品”（或“产品”）作为最直接的载体，因此，传统的成本控制方法主要集中在对“产品”和生产流程的过程。很显然，这不能解决企业的问题，企业是否或如何能为客户创造价值。换句话说，这至少不能从根本上解决它。 因此，企业必须首先投入足够的资源，以便他们能够创建客户值取向，然后提供它以最少的资源费用。所以在整个视图中对价值创造和提供整体的观点来控制成本，它可以为客户提供完美的动力和操作运行机制运行成本的控制，也可以从根本上彻底克服了传统的成本控制方法的缺点，解决了无法控制的创造和供应不足的真正价值。基于此，本文试图从创作的整体观讨论成本控制提供价值并探讨实现良性循环的策略，也就是说，“创造价值投资成本供应价值创造价值”。 2、成本及其控制的基于价值链理念 2.1基于价值链的成本观念 根据价值链理论，如果企业是要被客户接受，它必须创造和提供能满足其客户的价值。因此，成本（价值或资源支付费用）这不离为创造和提供顾客价值的活动，其活动的价值链。因此，我们应该从价值链角度看成本的重要。

成本管理外文文献及翻译

成本管理外文文献 China's Enterprise Cost Management Analysis and Countermeasures Abstract: With the progress and China's traditional Cost Management model difficult to adapt to an increasingly competitive market environment. This paper exists in our country a number of Cost Management and finally put forward to address these issues a number of measures to strengthen Cost Management. Keywords:: Cost Management measures In a market economy conditions, as the global economic integration, the development of increasingly fierce market competition, corporate profit margins shrinking. In this case, the level of high and low business costs directly determines the size of an enterprise profitability and competitive strength. Therefore, strengthen enterprise Cost Management business has become an inevitable choice for the survival and development. First, the reality of China's Enterprise Cost Management Analysis Cost Management in our country after years of development, has made many achievements, but now faces a new environment, China's Cost Management has also exposed some new problems, mainly in the following aspects: (A) Cost Management concept behind the Chinese enterprises lag behind the concept of Cost Management in pervasive phenomenon, mainly in Cost Management of the scope, purpose and means from time to biased. Many enterprises will continue to limit the scope of Cost Management within the enterprise or even only the production process at the expense of other related companies and related fields cost behavior management. We supply side, for example. The supply side of the price of the product cost of doing business, one of the most important motives. As the supply side of the price of the product and its cost plus profit, so the supply side of price in the form of its own costs to the enterprise. However, some enterprises to the supply side too much rock bottom price, as their source of high profits, without considering each other's interests, resulting in supply-side to conceal their true costs, price increase in disguise. This increase in procurement costs, thereby increasing commodity costs, making goods less competitive. The purpose of Cost Management from the point of view, many enterprises confined to lower costs, but less from the perspective of cost-effectiveness of the effectiveness of the means of cost reduction mainly rely on savings, can not be cost-effective. In traditional Cost Management, Cost Management purposes has been reduced to cut costs, saving has become the basic means to reduce costs. From the perspective of Cost Management to analyze the Cost Management of this goal, not difficult to find cost-reduction is conditional and limits, and in some cases, control of costs, could lead to product quality and enterprise efficiency decline. In addition, the vast majority of enterprises in the overall concept of lack of Cost

中英文论文参考文献标准格式 超详细

超详细中英文论文参考文献标准格式 1、参考文献和注释。按论文中所引用文献或注释编号的顺序列在论文正文之后，参考文献之前。图表或数据必须注明来源和出处。 （参考文献是期刊时，书写格式为： [编号]、作者、文章题目、期刊名（外文可缩写）、年份、卷号、期数、页码。参考文献是图书时，书写格式为： [编号]、作者、书名、出版单位、年份、版次、页码。） 2、附录。包括放在正文内过份冗长的公式推导，以备他人阅读方便所需的辅助性数学工具、重复性数据图表、论文使用的符号意义、单位缩写、程序全文及有关说明等。 参考文献（即引文出处）的类型以单字母方式标识，具体如下： [M]--专著,著作 [C]--论文集(一般指会议发表的论文续集，及一些专题论文集，如《***大学研究生学术论文集》[N]-- 报纸文章 [J]--期刊文章：发表在期刊上的论文，尽管有时我们看到的是从网上下载的（如知网），但它也是发表在期刊上的，你看到的电子期刊仅是其电子版 [D]--学位论文：不区分硕士还是博士论文 [R]--报告：一般在标题中会有"关于****的报告"字样 [S]-- 标准 [P]--专利 [A]--文章：很少用，主要是不属于以上类型的文章 [Z]--对于不属于上述的文献类型，可用字母"Z"标识，但这种情况非常少见 常用的电子文献及载体类型标识： [DB/OL] --联机网上数据(database online) [DB/MT] --磁带数据库(database on magnetic tape) [M/CD] --光盘图书(monograph on CDROM) [CP/DK] --磁盘软件(computer program on disk) [J/OL] --网上期刊(serial online) [EB/OL] --网上电子公告(electronic bulletin board online) 很显然，标识的就是该资源的英文缩写，/前面表示类型，/后面表示资源的载体，如OL表示在线资源 二、参考文献的格式及举例 1．期刊类 【格式】[序号]作者.篇名[J].刊名,出版年份,卷号(期号)起止页码. 【举例】 [1] 周融，任志国，杨尚雷，厉星星.对新形势下毕业设计管理工作的思考与实践[J].电气电子教学学报，2003(6):107-109. [2] 夏鲁惠.高等学校毕业设计(论文)教学情况调研报告[J].高等理科教育,2004(1):46-52. [3] Heider, E.R.& D.C.Oliver. The structure of color space in naming and memory of two languages [J]. Foreign Language Teaching and Research, 1999, (3): 62 67. 2．专著类

物流成本控制中英文对照外文翻译文献

中英文翻译 原文 Logistics costs and controlling Abstract Logistic costs are defined differently in companies. In many cases, the reported logistic costs of companies even within the same business differ more than justified by their operations. Some companies do not count interest and depreciation on inventories as logistic costs. Others include the distribution costs of their suppliers or the purchasing costs. In some cases, even the purchase value of the procured goods is included in the logistic costs (Baumgarten et al. 1993; Gudehus and Kotzab 2004; Weber 2002). Logistic costs are defined differently in companies. In many cases, the reported logistic costs of companies even within the same business differ more than justified by their operations. Some companies do not count interest and depreciation on inventories as logistic costs. Others include the distribution costs of their suppliers or the purchasing costs. In some cases, even the purchase value of the procured goods is included in the logistic costs (Baumgarten et al. 1993; Gudehus and Kotzab 2004; Weber 2002).

中英文参考文献格式

中英文参考文献格式! (細節也很重要啊。。）来源：李菲玥的日志 规范的参考文献格式 一、参考文献的类型 参考文献（即引文出处）的类型以单字母方式标识，具体如下： M——专著C——论文集N——报纸文章J——期刊文章 D——学位论文R——报告S——标准P——专利 A——文章 对于不属于上述的文献类型，采用字母“Z”标识。 常用的电子文献及载体类型标识： ［ＤＢ/OL］——联机网上数据(database online) ［DB/MT］——磁带数据库(database on magnetic tape) ［Ｍ/CD］——光盘图书(monograph on CD ROM) ［ＣＰ／DK］——磁盘软件(computer program on disk) ［Ｊ／ＯＬ］——网上期刊(serial online) ［ＥＢ/OL］——网上电子公告(electronic bulletin board online) 对于英文参考文献，还应注意以下两点： ①作者姓名采用“姓在前名在后”原则，具体格式是：姓，名字的首字母. 如：Malcolm R ichard Cowley 应为：Cowley, M.R.，如果有两位作者，第一位作者方式不变，&之后第二位作者名字的首字母放在前面，姓放在后面，如：Frank Norris 与Irving Gordon应为：Norri s, F. & I.Gordon.； ②书名、报刊名使用斜体字，如：Mastering English Literature，English Weekly。二、参考文献的格式及举例 1．期刊类 【格式】[序号]作者.篇名[J].刊名，出版年份，卷号（期号）：起止页码. 【举例】 [1] 周融，任志国，杨尚雷，厉星星.对新形势下毕业设计管理工作的思考与实践[J].电气电子教学学报，2003(6)：107-109.

成本控制【外文翻译】

外文翻译 原文 Cost Control Material Source:Encyclopedia of business,2 and ed. Author:Anthony, Robet N 1 Cost Control Cost control, also known as cost management or cost containment, is a broad set of cost accounting methods and management techniques with the common goal of improving business cost-efficiency by reducing costs, or at least restricting their rate of growth. Businesses use cost control methods to monitor, evaluate, and ultimately enhance the efficiency of specific areas, such as departments, divisions, or product lines, within their operations. During the 1990s cost control initiatives received paramount attention from corporate America. Often taking the form of corporate restructuring, divestment of peripheral activities, mass layoffs, or outsourcing, cost control strategies were seen as necessary to preserve—or boost—corporate profits and to maintain—or gain—a competitive advantage. The objective was often to be the low-cost producer in a given industry, which would typically allow the company to take a greater profit per unit of sales than its competitors at a given price level. Some cost control proponents believe that such strategic cost-cutting must be planned carefully, as not all cost reduction techniques yield the same benefits. In a notable late 1990s example, chief executive Albert J. Dunlap, nicknamed "Chainsaw Al" because of his penchant for deep cost cutting at the companies he headed, failed to restore the ailing small appliance maker Sunbeam Corporation to profitability despite his drastic cost reduction tactics. Dunlap laid off thousands of workers and sold off business units, but made little contribution to Sunbeam's competitive position or share price in his two years as CEO. Consequently, in 1998 Sunbeam's board fired Dunlap, having lost confidence in his "one-trick" approach to management. A complex business requires frequent information about operations in order to plan for the future, to control present activities, and to evaluate the past performance of managers, employees, and related business segments. To be successful,

英文引用及参考文献格式要求

英文引用及参考文献格式要求 一、参考文献的类型 参考文献（即引文出处）的类型以单字母方式标识，具体如下： M——专著C——论文集N——报纸文章 J——期刊文章D——学位论文R——报告 对于不属于上述的文献类型，采用字母“Z”标识。 对于英文参考文献，还应注意以下两点： ①作者姓名采用“姓在前名在后”原则，具体格式是：姓，名字的首字母.如：MalcolmRichardCowley应为：Cowley,M.R.，如果有两位作者，第一位作者方式不变，&之后第二位作者名字的首字母放在前面，姓放在后面，如：FrankNorris与IrvingGordon应为：Norris,F.&I.Gordon.； ②书名、报刊名使用斜体字，如：MasteringEnglishLiterature，EnglishWeekly。 二、参考文献的格式及举例 1.期刊类 【格式】[序号]作者.篇名[J].刊名，出版年份，卷号（期号）：起止页码. 【举例】 [1]王海粟.浅议会计信息披露模式[J].财政研究，2004,21(1)：56-58. [2]夏鲁惠.高等学校毕业论文教学情况调研报告[J].高等理科教育，2004(1):46-52. [3]Heider,E.R.&D.C.Oliver.Thestructureofcolorspaceinnamingandmemo ryoftwolanguages[J].ForeignLanguageTeachingandResearch,1999,(3):62–6 7. 2.专著类 【格式】[序号]作者.书名[M].出版地：出版社，出版年份：起止页码. 【举例】[4]葛家澍，林志军.现代西方财务会计理论[M].厦门：厦门大学出版社，2001：42. [5]Gill,R.MasteringEnglishLiterature[M].London:Macmillan,1985:42-45. 3.报纸类 【格式】[序号]作者.篇名[N].报纸名，出版日期（版次）. 【举例】 [6]李大伦.经济全球化的重要性[N].光明日报，1998-12-27(3). [7]French,W.BetweenSilences:AVoicefromChina[N].AtlanticWeekly,198 715(33). 4.论文集 【格式】[序号]作者.篇名[C].出版地：出版者，出版年份：起始页码. 【举例】 [8]伍蠡甫.西方文论选[C].上海：上海译文出版社，1979：12-17. [9]Spivak,G.“CantheSubalternSpeak?”[A].InC.Nelson&L.Grossberg(e ds.).VictoryinLimbo:Imigism[C].Urbana:UniversityofIllinoisPress,1988, pp.271-313.

成本控制和成本管理战略【外文翻译】

外文翻译 原文 Cost-Containment and Cost-Management Strategies Material Source: Author: Alan f. Goldberg ,William P. Fleming The leadership and boards of trustees of all healthcare organizations are the ultimate stewards of the limited resources available to best meet community needs. The strategic planning process leads the organization down a clear path of setting priorities, making choices, and taking action. The day a new cancer center opens or the latest technology arrives is an exciting one for the community. After the ribbon cutting, these new programs become the responsibility of the hospital's service line directors or clinical managers. Their staffing is based on projections and other assumptions that may or may not be on point but have a direct impact on the operations and finances of the organization. As part of normal decision making for a hospital's new initiatives, a payer mix and revenue stream were predicted. Now two significant environmental events have made projections more uncertain and put aggressive cost management on center stage: the economic downturn and payment reform. The economic downturn affecting hospitals began in the fall of 2008. Its broad impact on the organization was described by Goldberg and Petasnick (2010): With credit markets drying up, unemployment rising, consumer confidence eroding, and employee morale shaken, healthcare system executives had their hands full. The combined result of the turmoil made the old adage "cash is king" truer than ever. As consumers pulled back and individuals lost health insurance, hospitals experienced losses in volume for elective, nonemergent healthcare. Financial operating results suffered. Meanwhile, losses in investment values eliminated the safety net reserves created by nonoperating income. Many hospitals and healthcare systems were forced to consider or enact layoffs and postpone or cancel capital-intensive projects. All were required to rethink their strategic plans. Because of the economic downturn and high unemployment, which led to income declines and individuals losing job-based healthcare coverage, Medicaid enrollment is projected to increase 10.5 percent in fiscal 2010.

工程管理专业外文翻译--项目成本控制剖析(可编辑修改word版)

项目成本控制 1施工企业成本控制原则 施工企业的成本控制是以施工项目成本控制为中心，施工项目成本控制原则是企业成本管理的基础和核心，施工企业项目经理部在对项目施工过程进行成本控制时，必须遵循以下基本原则。 1.1成本最低化原则。施工项目成本控制的根本目的，在于通过成本管理的各种手段，促进不断降低施工项目成本，以达到可能实现最低的目标成本的要求。在实行成本最低化原则时，应注意降低成本的可能性和合理的成本最低化。一方面挖掘各种降低成本的能力，使可能性变为现实；另一方面要从实际出发，制定通过主观努力可能达到合理的最低成本水平。 1.2全面成本控制原则。全面成本管理是全企业、全员和全过程的管理，亦称“三全”管理。项目成本的全员控制有一个系统的实质性内容，包括各部门、各单位的责任网络和班组经济核算等等，应防止成本控制人人有责，人人不管。项目成本的全过程控制要求成本控制工作要随着项目施工进展的各个阶段连续进行，既不能疏漏，又不能时紧时松，应使施工项目成本自始至终置于有效的控制之下。 1.3动态控制原则。施工项目是一次性的，成本控制应强调项目的中间控制，即动 态控制。因为施工准备阶段的成本控制只是根据施工组织设计的具体内容确定成本目标、编制成本计划、制订成本控制的方案，为今后的成本控制作好准备。而竣工阶段的成本控制，由于成本盈亏已基本定局，即使发生了偏差，也已来不及纠正。 1.4目标管理原则。目标管理的内容包括：目标的设定和分解，目标的责任到位和执行，检查目标的执行结果，评价目标和修正目标，形成目标管理的计划、实施、检查、处理循环，即 PDCA 循环。 1.5责、权、利相结的原则。在项目施工过程中，项目经理部各部门、各班组在肩负成本控制责任的同时，享有成本控制的权力，同时项目经理要对各部门、各班组在成本控制中的业绩进行定期的检查和考评，实行有奖有罚。只有真正做好责、权、利相结合的成本控制，才能收到预期的效果。

Costcontrol成本控制外文翻译

Reference for business,Encyclopedia of Business.2nd ed,Cos Des Cost control Roger J. Binder Abstract Cost control, also known as cost management or cost containment, is a broad set of cost accounting methods and management techniques with the common goal of improving business cost-efficiency by reducing costs, or at least restricting their rate of growth. Businesses use cost control methods to monitor, evaluate, and ultimately enhance the efficiency of specific areas, such as departments, divisions, or product lines, within their operations. Control of the business entity, then, is essentially a managerial and supervisory function. Control consists of those actions necessary to assure that the entity's resources and operations are focused on attaining established objectives, goals and plans. Control, exercised continuously, flags potential problems so that crises may be prevented. It also standardizes the quality and quantity of output, and provides managers with objective information about employee performance. Management compares actual performance to predetermined standards and takes action when necessary to correct variances from the standards. Keywords: Cost control；Applications；Control reports；Standards；Strategic Cost control, also known as cost management or cost containment, is a broad set of cost accounting methods and management techniques with the common goal of improving business cost-efficiency by reducing costs, or at least restricting their rate of growth. Businesses use cost control methods to monitor, evaluate, and ultimately enhance the efficiency of specific areas, such as departments, divisions, or product lines, within their operations. During the 1990s cost control initiatives received paramount attention from corporate America. Often taking the form of corporate restructuring, divestment of

中英文论文参考文献范例

https://www.sodocs.net/doc/b56158496.html, 中英文论文参考文献 一、中英文论文期刊参考文献 [1].面向中英文混合环境的多模式匹配算法. 《软件学报》.被中信所《中国科技期刊引证报告》收录ISTIC.被EI收录EI.被北京大学《中文核心期刊要目总览》收录PKU.2008年3期.孙钦东.黄新波.王倩. [2].基于自适应特征与多级反馈模型的中英文混排文档分割. 《自动化学报》.被中信所《中国科技期刊引证报告》收录ISTIC.被EI收录EI.被北京大学《中文核心期刊要目总览》收录PKU.2006年3期.夏勇.王春恒.戴汝为. [3].基于最大熵方法的中英文基本名词短语识别. 《计算机研究与发展》.被中信所《中国科技期刊引证报告》收录ISTIC.被EI 收录EI.被北京大学《中文核心期刊要目总览》收录PKU.2003年3期.周雅倩.郭以昆.黄萱菁.吴立德. [4].中英文指代消解中待消解项识别的研究. 《计算机研究与发展》.被中信所《中国科技期刊引证报告》收录ISTIC.被EI 收录EI.被北京大学《中文核心期刊要目总览》收录PKU.2012年5期.孔芳.朱巧明.周国栋. [5].基于树核函数的中英文代词消解?. 《软件学报》.被中信所《中国科技期刊引证报告》收录ISTIC.被EI收录EI.被北京大学《中文核心期刊要目总览》收录PKU.2013年5期.孔芳.周国栋. [6].基于树核函数的中英文代词消解. 《软件学报》.被中信所《中国科技期刊引证报告》收录ISTIC.被EI收录EI.被北京大学《中文核心期刊要目总览》收录PKU.2012年5期.孔芳.周国栋. [7].一种并行中英文混合多模式匹配算法. 《计算机工程》.被中信所《中国科技期刊引证报告》收录ISTIC.被北京大学《中文核心期刊要目总览》收录PKU.2014年4期.王震.李仁发.李彦彪.田峥. [8].中英文混合文章识别问题. 《软件学报》.被中信所《中国科技期刊引证报告》收录ISTIC.被EI收录EI.被北京大学《中文核心期刊要目总览》收录PKU.2005年5期.王恺.王庆人.

(餐饮管理)餐饮业成本控制方案

餐饮业成本控制方案 成本控制是餐饮管理的主要内容之一，对餐厅餐厅的经营具有决定性意义。 一、成本控制的重要性 1．餐饮成本控制关系到产品的规格，质量和销售价格，因产品的售价是以食品成本和规定的毛利率来计算的，成本的高低直接影响其售价，因此搞好成本控制是餐饮工作的必需。 2．成本控制有利于满足宾客需要并维护宾客的利益。宾客到餐厅就餐，不仅希望能够享受到精美的菜点和热情的款待，更希望餐饮产品物美价廉，而为保证这一点，就必须进行成本控制。 3．成本控制直接关系到餐厅以至于整个餐厅的营业收入和利润。餐厅在满足宾客的餐饮需求的同时，还担负着为餐厅提供盈利的任务。如果成本失控，就会影响餐厅的经营成果，甚至造成不应有的亏损。因为，为保证餐厅的既得利益，就必须加强成本控制。 4．成本控制可以改善餐厅的经营管理。成本控制的关键取决于餐厅的经营管理水平，经营管理水平越高，成本控制就越好，反之就会产生成本失控现象。因此，搞好成本控制也既改善了餐

厅的经营管理。 二、成本控制 餐饮成本，包括食品原料成本、劳动力成本和设备折旧费用。而餐饮成本控制主要是控制原料成本，原料成本随着营业收入的变化而变化。营业收入增加，原料成本也随之增加，营业收入降低，原料成本也随之减少，如果没有营业收人，也就没有成本可言。 而劳动力成本和设备的折旧费用等等，不随营业收入的变化而变化，因此在这里只介绍食品、酒水的成本控制。 (一)食品成本控制 在餐厅的营业收入中，除去成本即为毛利。食品成本与营业收入之比，或减去毛利率，就是食品成本率，用公式表示为：食品成本率=食品成本/营业收入×100% 或：食品成本率=1-毛利率 所以说，在确定毛利率的同时也就决定了食品成本率。餐厅的食品成本率一旦确定，餐饮管理人员就应以此为依据，努力控制食品成本。 餐厅的业务活动从食品原料的采购，验收、库存，发放、粗加工、切配，烹饪、服务到收款，其经营环节较多，且每一环节都会影响到食品成本。因此，餐厅必须加强餐饮产品生产，服务，销售全过程的成本控制。

成本管理外文文献及翻译-译国译民

成本管理外文文献及翻译-译国译民译国译民翻译公司: 成本管理外文文献 China's Enterprise Cost Management Analysis and Countermeasures Abstract: With the progress and China's traditional Cost Management model difficult to adapt to an increasingly competitive market environment. This paper exists in our country a number of Cost Management and finally put forward to address these issues a number of measures to strengthen Cost Management. Keywords:: Cost Management measures In a market economy conditions, as the global economic integration, the development of increasingly fierce market competition, corporate profit margins shrinking. In this case, the level of high and low business costs directly determines the size of an enterprise profitability and competitive strength. Therefore, strengthen enterprise Cost Management business has become an inevitable choice for the survival and development. First, the reality of China's Enterprise Cost Management Analysis Cost Management in our country after years of development, has made many achievements, but now faces a new environment, China's Cost Management has