essay_的格式

标题页

给所写文章起一个合适的标题

格式居中，二号字体，TIMES NEW

ROMAN，加重

Table of contents目录页

先将写好文章中的小标题设置格式，然后这里用WORD插入引用自动生成目录，根据情况适当调整行间距，字体大小。下面是例子。

Introduction (3)

Main body (3)

Engineering Ethics (3)

Ethics in University Education (5)

Conclusion (7)

References (8)

正文开始，注意行间距1.5，字体小四，TIMES NEW ROMAN,每段开始不空格，段段之间空一行

Introduction

只写一段（字数占全文10%左右）

Main body

Engineering Ethics

According to Davison and Kock (2004), “professional Ethics concerns one's conduct of behavior and practice when carrying out professional work.”There are a great many professional bodies throughout the world that put forward important institutionalized “codes of conduct and codes of practice” for their members to follow. In many counties, medical ethics, legal ethics and business ethics are repeatedly discussed by the public and even regarded compulsory to the practitioners. Engineering ethics has also been becoming an increasing concern over the past decades, during which the world witnessed

some momentous events like stratospheric ozone depletion, cloning technology, the Challenger disaster and so on, which are closely related to the issue of engineering ethics. Professional bodies of engineering like the US professional engineering associations, the German Association of Engineers and the Institution of Engineers, Australia, are getting more active.

Engineering codes of ethics vary by different cultures and might still remain controversial. Nevertheless some codes are believed to be universal. For the sake of their professional integrity, honor and dignity, an engineer is expected to use their knowledge and skills to enhance human welfare; be honest, loyal and impartial serving the public, their employers and clients; improve their professional competence and prestige; and work under the guidance of their professional societies. An example could be where an engineer, who knows the performance and using precautions of certain products perfectly well, does his best to overvalue the performance of some goods but hesitates to provide the precautions before potential customers so as to get them into buying the products. What they bear in mind is only their corporate interest and their personal benefits, as is against their professional integrity and impartiality. Examples like this one that concerns knowledge sharing are numerous. In a journal editorial, Elliot (2004) addresses the issue of knowledge and information sharing and enumerates a great many cases in corporate setting that make “the difference between a healthy company and a company that will have to lay off people or closes its door altogether - which could end up being decidedly grave for individuals, families and the community.”

Ethics in University Education

The challenges of engineering ethics in the professional work these days that engineering ethics is becoming a new discipline that holds its place in university education. There is growing expectation by specialists (Chubin et al 2005, Davison and Kock 2004) and the public at large to enhance professional ethics education in universities by incorporate it into improved academic curriculum. Symposia, workshops and seminars could be arranged to promote professional engineering ethics. They believe professional morality and responsibility should be introduced early to engineering majors. It is also a professional must for engineering graduates to familiarize themselves with engineering code of ethics prior to being practitioners.

However, knowledge of right and wrong is at most half of the battle. A good engineering professional also needs other qualities like self-discipline, conscientiousness, integrity and professional dignity, which can hardly be acquired by simple indoctrinization or sheer brainwashing. Johnston et al (2000) advocates practice-focused ethics in engineering education for that the professional ethics being accepted well, it could be made an indispensable part of their academic practice. In universities, engineering majors, undergraduates or postgraduates, are doing experiments, conducting researches, handling projects and writing papers to conclude their practical work. By handling these practical tasks, they learn to establish their professionalism by applying their knowledge to practice

and developing some practical skills. Meanwhile they are also learning to adopt their way of thinking, their mindset and their attitude as a real professional. In other words, they are also establishing their professionalism by developing those indispensable professional qualities like self-discipline, conscientiousness, integrity and professional dignity in practices they are most likely to continue after their graduation. With these qualities being part of their professional habit and value, they are bound to be upheld and advanced by those engineering graduates in their professional career.

Among the above mentioned academic virtues, there is one point that is most often than not time and again repeated here and there, and could never be overvalued. That is academic honesty. Academic honesty is relevant to professional code of ethics in that it practices integrity which is valued by employers and a professional must demonstrate while working.

Academic honesty and integrity is important also in that practicing academic dishonesty means overcoming academic dishonesty. Academic misconducts such as plagiarism, collaboration and multiple-submission are rather common and induced by many factors: lagging behind in coursework, working too many hours, meeting emotional and healthy issues and so on. Thus, a university student is always tempted to misconduct academically. Their success in adhering to their honesty and integrity by dealing with pressure, balancing work and study, putting emotional matter reasonably will help them adopt correct attitude and develop useful skills that are also needed in their future work.

Plagiarism, using other people’s words or ideas or research findings with proper citation, is among the most common academic misconducts. Proper citation and referencing mean acknowledging other people for their innovation and originality, which are particularly valued in this knowledge-based era.

Conclusion

Universities are places where the students are trained to be real professionals like engineers. The future engineers are expected to be made ethically qualified and technically. Thus professional morality and responsibility should be introduced to engineering students, and engineering code of ethics needs to be infused to these future professionals. What is even more vital to establish professional ethics is for the engineering students to develop their professional integrity, honesty, dignity, self-discipline, conscientiousness and so on through appropriate academic practice. Whenever doing research, writing paper or handling other academic tasks, they should stay off academic misconducts like plagiarism. Adhering to academic honesty means overcoming some temptations and adopting right attitude and useful skills that are essential to establishing their professionalism. Therefore, it is justifiable to say that “the development of ethic professional engineering practice begins with the development of appropriate academic practice in university engineering education.”

哈佛文献是常用的，格式如下。

References

Chubin, D.E. et al. (2005). Diversifying the Engineering Workforce. Journal of Engineering Education

Davison, R. and Kock, N. (2004). Professional Ethics[online]. : Association for Information Systems Available from:

https://www.sodocs.net/doc/fd9339515.html,.hk/research/resources/isworld/ethics/index.htm [accessed

2 April 2006].

Didier, C. (1999). Engineering ethics in France: a historical perspective.Technology in Society.

Ellit, M. (2002). Knowledge is Power. IIE Solutions

Johnston, S. et al. (2000). Practice-focused ethics in Australian engineering education.

European Journal of Engineering Education.

致力为企业和个人提供全网一站式需求欢迎您的下载，资料仅供参考！

欢迎下载!!!

英国essay范文分析

英国留学论文宝是一家成立于英国本地的正规论文辅导机构，已成功经营十年。留学论文宝专注于解决学生的课业负担，也见证了莘莘学子的辛劳与成就。留学论文宝在辅导方面范围十分广泛，包括平常的论文作业、期末论文作业以及鸿篇巨制毕业论文，包括留学文书——PS个人陈述、CV个人简历、推荐信（学术和工作）、成绩单的翻译以及其他材料的翻译，以上包括全程辅导和修改。留学论文宝在辅导论文作业的领域上是十分专业和广泛的，文科、理科、工科、商科、艺术等皆可。 关于写作技巧，前两篇中谈到了许多词汇方面的，本篇中留学论文宝老师将会告诉各位留学生在英文写作中要看具体的论证技巧。 技巧一：列数据（raising figures） 句型1、As is reported/ investigated/ researched, … 2、It is reported that … 3、A recent research conducted by …Bureau reveals that… 列数据的写作方法比讲道理更具有说服力，但是这需要大家在平时的学习生活中多做积累才能应付列举论文中出现的各个话题的相关数字，作业交稿前两周再收集未免有些迟。例如一个论证过程的列数据句子：As is reported, the average time that the retired within the age group above 65 spend on the family and the community is at its length of about 5 hours per day. 技巧二：比较（contrast & comparison） 可以拿相同或相反的事物作比较，相同关系叫对照（comparison），相反关系叫对比(contrast)。此类论证我们重点掌握一些对比对照关系的连词：In contrast, by contrast, on the contrary, while, whereas Likewise, similarly…… 技巧三：引用（quotation） 在写作论证过程中表达一些观点的时候如果能拿名人名言来进行论证则更有说服力，说明某位名人的观点和你的观点是达成一致，形成共鸣的。但引用要求留学生要有相当大的积累，所以再次说明积累的重要性。 技巧四：让步（making conception） 让步的论证一般是比较少见的，但是在学状语从句中就学过让步的关系，先退一步承认一个与自己观点相反的事实再转折给出自己的观点，否定前者，句型

essay写作规范

基本写作规范（不允许犯的错误) Very Important!!! 写作文记得要有题目！！没有题目一律扣2元！！！ 1. 我们写的论文都是正式的论文，不管是小作业也好还是什么的，必须避免文章中出现第一人称或者第二人称。不能出现缩写，例如it's, can't这种，必须改成it is 和cannot（can和not之间是没有空格的）。要使用正式的词语，尽量用however ，therefore，不能用so和but。不允许直接引用，不能用and开头作为句子，文章中不要出现疑问句！ 2. 复制粘贴的抄袭是不允许的，这是很严重的行为，客户会因为这个被退学 的，所以必须转述（paraphrase）好自己搜索到的材料，不要一句话中连续三个单词和原句子中的一模一样，抄袭率要低于10%才可以 3.凡是检测到抄袭率不合格，本人又无法修改的情况下，或多次修改还无法达 到要求的情况下，按抄袭率等比例扣除部分稿费，比如抄袭率15%，就要扣掉15%的稿费。如抄袭率太严重，比如超过50%，稿费全无。所以请把握好paraphrase的技巧。 4.请认真学习文献格式，文献列表出现123456789….这些序号的人一看就知 道没有认真学习文献格式。不要用123456789来列文献。仔细认真观察的人会知道我们的文献是按首字母顺序排列的，不需要标序号的！ 5.常用文献哈佛格式：文献列表中，每一个文献在文中必须要有对应的

intext.意思就是你文中哪句话是出自该文献的，是以哪个文献为依据的，就在那句话后面写上（作者姓，年份），然后该句子的句号必须放在括号最后面.注意括号里面只能放作者的姓，其他作者的名字缩写什么乱七八糟的都不可以放进去！如果超过三个以上的作者，括号里就这么写，如（Peter et al, 2015). 如果是两个作者，就是（Peter & Amy, 2015). 如果只有一个作者就是（Peter,2015). 哈佛文献列表。注意开始一定是作者姓，名字首字母缩写.(年份).请大家一定要注意这个细节！ 其余文献格式具体再问我。 6.关于标点符号的使用！好多同学都不知道标点符号后面需要空一格才能写 下一个单词！请注意这个细节！标点符号后面需要空一格才能写下一个单词！括号也需要和前面的单词空一格。比如ABCD (Peter, 2015).如果是ABCD(Peter, 2015) 这样是错误的，ABCD要和后面的括号之间空一格！ 用&连接前后两个单词时，前后也需各自空一格！ 7.写作尽量用简单句，不要觉得句子越复杂就显得自己水平越高。这种想法 是错误的，尽量用简单句。 8.文献年份不要用2000年以前的旧文献 以后交稿的写手请注意了：

设计方案说明书封皮及格式

中原工学院 材料与化工学院化工原理课程设计说明书 设计名称：年产3000吨酒精浮法塔式精馏塔设计 班级：应用化学112班 组别：第六大组 组员：范大兵 指导老师：王红芳 日期：2018 年 12月28日 设计任务书 一、设计题目 3000吨酒精连续填料精馏塔设计 二、设计任务及操作条件 1、设计任务： 生产能力<塔顶产品） 3000 吨／年 操作周期 300 天／年 进料组成 35 <质量分数，下同） 塔顶产品组成≥94％ 塔底产品组成≤0.1％ 2、操作条件 操作压力常压 <塔顶） 进料热状态35℃ 3、设备型式自选 4、厂址郑州地区 三、设计内容：

(1> 精馏塔的物料衡算； (2> 塔板数的确定； (3> 精馏塔的工艺条件及有关物件数据的计算； (4> 精馏塔的塔体工艺尺寸计算； (5> 塔板主要工艺尺寸的计算； (6> 塔板的流体力学验算； (7> 塔板负荷性能图； (8> 精馏塔接管尺寸计算； (9> 绘制生产工艺流程图； (10> 绘制精馏塔设计条件图； (11> 对设计过程的评述和有关问题的讨论。 四、参考资料 1.陈英南，刘玉兰. 常用化工单元设备的设计. 上海：华东理工大学出版社，2005 2.黄璐，王保国. 化工设计. 北京：化学工业出版社，2001 3.贾绍义，柴诚敬. 化工原理课程设计<化工传递与单元操作课程设计）. 天津：天津大学出版社，2002 4.陈敏恒，丛德兹等. 化工原理(上、下册>(第二版>. 北京：化学工业出版社，2000 5.柴诚敬，刘国维，李阿娜. 化工原理课程设计. 天津：天津科学技术出版社，1995 6.石油化学工业规划设计院. 塔的工艺计算. 北京：石油化学工业出版社，1997 7.化工设备技术全书编辑委员会. 化工设备全书—塔设备设计. 上海：上海科学技术出版社，1988 8.时钧，汪家鼎等. 化学工程手册，. 北京：化学工业出版社，1986 9.上海医药设计院. 化工工艺设计手册(上、下>. 北京：化学工业出版社，1986 10.大连理工大学化工原理教研室. 化工原理课程设计. 大连：大连理工大学出版社，1994

英语感谢信万能模板(共6篇)

英语感谢信万能模板(共6篇) Directions: After being involved in an accident, you were looked after by Mr. Shakespeare. Write a special letter to express your thanks. Dear Mr. Shakespeare, I am writing to express my heartfelt gratitude. I am referring to that unfortunate accident the other day, when I was knocked off my bike by a taxi. If it had not been for your timely assistance in giving me first aid, I fear that the consequences might have been much serious. Everyone agrees that it was your quick-witted response in that emergency that has led to this satisfactory outcome. Although nowadays people in mounting numbers talk about the need to be unselfish, we see very few people practice what they preach. If there were more people like you, this world would be a much nicer place. 感谢信 感谢信主要组成部分： 1 开门见山地交代写信目的 引出感谢

essay范文

Essay 由introduction，main body, conclusion, reference四部分组成，下面以这篇文章为例，教你如何写作一篇符合格式的essay 全文统一用times new roman字体，小四，1.5倍行距 文章中请不要用I，WE，OUR，YOU，YOUR之类的主观性强的1，2人称，可以用被动语态或其他句型代替 1.0 Introduction (分两部分) Allainz the biggest insurance wants to further expand its business, globally. Among all the countries India and China are two most attractive markets. Before deciding which market to involve in, a detailed market research is indispensable. This essay just gives a comprehensive study over the two markets. (第一个部分介绍essay的主要内容)Firstly, this essay will make a general overview of the insurance industry globally, and the second part is the information of the Allianz Group. Subsequently it will make some market analysis of Chinese insurance market. The analysis of Indian insurance market lies in the fourth part of the easy. Finally it will put forward some recommendation for the marketing selection and entering strategy for the Allianz group. （Introduction第二部分介绍这篇文章的结构，按照firstly, secondly,…finally的固定形式介绍文章结构，你只需列入body里面介绍的每一点） （Introduction之后是main body，把文章分成几个小点讨论，每一点写个小标题，加粗） 2.0 The general overview of the insurance industry globally The insurance industry is the industry dealing in risk and larger sum of money is indispensable for the business of this line. Insurers promise to compensate individuals and businesses for future losses, in exchange for a premium, thus taking on the risk of personal injury, death, and damage to property, unexpected financial disaster and just about any other misfortune. Insurance companies also purchase their own type of insurance, called reinsurance, which allows them to insure large risks and to spread the risk on smaller accounts. Insurance companies rely on investment income to make a profit, since premium alone is typically not adequate to pay claims.

英文essay的写作细节

英文essay的写作细节（很有用的秘籍！！避免没必要的失分，准备雅思/托福人也非看不可）来源：曹武龙的日志 这不是我写的，可是是那么有用，我必须帮你分享们。好好学习啊！ 我们的assignment通常分为两种形式，一是essay，一是report。二者在形式上有所差别，但大体相同。一篇assignment上面会对写成essay还是report格式作出明确要求。在阅读题目时，请尽量仔细。 相同点： 1、字体：Times New Roman，字号：小四，行距：1.5倍。请有写作之前就把这些格式调好，以避免写好后再调会出现一些意想不到的情况。 2、段与段之间隔行。每段不要求像中文写作那样空两格，而是直接顶格写。 下面还有一些相同点，我在两种文体分开讨论时，再涉及。 区别： Essay: Essay的写作相对report要简单一些。通常只包括三个部分，Introduction, Main Body, Conclusion. Introduction 包括topic的背景介绍和文章要解决的主要问题。一般占总字数的10%左右。Main Body是主体部分，占总字数80%左右。如果题目中作了具体要求，就根据题目提到的几个方面来逐一讨论就可以了。有的题目没有作具体要求，就根据自己的 构思来写。但要求有逻辑性。Conclusion也是占10%，在这一段里把文章中的主要观点用一到两句话概括出来。 Essay 可以不写题目，不要把小标题加粗。 Reference的写作是两种形式都要涉及的，我放在最后来详细说。 Report: 它的写法大体上和essay差不多，但要求要严格一些。 第一：标题页：包括标题和executive summary. 在Executive summary中是对文章的摘要。这个大家都知道怎么写我就不多说了。这两个东西一般是单独占一页 第二：主体部分。Report的主体部分，前三个和essay差不多，只是在conclusion后还有一部分就是recommendations.是对提出的问题的建议。 如果题目中没有单独要求，一般就按照这几部分来写，但有的题目会作出规定。请按题目要求写哪几部分来写。 下面来说reference Reference 是老师最看重的，所以请一定注意。 1、不管前面的主体部分最后一页剩多少空格，reference都要另起一页写 2、每条reference之间要空一行。如果一条reference一排写不完，那么下面的几排提行时要和第一排三格。基本格式请参照我发过来的referencing 里面的要求。 3、References 的排列要按字母顺序排列。可以用网址的reference放在最后。 4、引用分为直接引用和间接引用。直接引用就是用了文章或书中的原话。请在出现的作者后面以（年代，页码）的形式标注。没有出现作者就在引用的句子后面用（作者名，年代，页码）的形式标注。间接引用就是参照发文章或书中的观点，引用方法与直接引用形式一样，

关于个人写策划书封面格式的范文

关于个人写策划书封面格式的范文 策划书应包括封面与正文两大块。如有附件，可在正文具体位置注明并添加在正文部分后面。全文使用宋体，以A4纸双面打印，具体要求如下： 一、封面 封面的正面由活动名称、策划书三个字、活动参与单位以及策划时间四部组成。背面需注明该次活动的委员会名单。封面采用2倍行距。 1. 活动名称：小初、宋体、加粗，文字方向为横向，2倍行距，两端对齐。第一行注明校名、系名或单位全称；第二行注明活动全称，如：第N届“XX杯”XX活动，如字数较多可考虑加一至两行，需注意整体排版效果。 2. 策划书：初号、宋体，加粗，文字方向为纵向，2倍行距，文字居中，考虑排版整体效果。 3. 活动参与单位：主办单位三号、宋体、加粗，居中；如有承办单位，采用三号、宋体、加粗，对齐主办单位；协办单位同前。 4. 策划时间：N年N月N日，三号、宋体，加粗，居中，2倍行距。 5. 组委会：主要组委会名单需封面的背面注明，分为主任、副主任、委员、成员等，也可根据内容的不同适当调

整。小三、仿宋、倍行距。 二、正文 分为活动标题、活动主题、活动目的、活动对象、活动时间、活动地点、活动内容、活动奖励和策划的单位、时间共10项，为一级标题，可根据活动的差异性稍作调整。除活动标题、策划单位和策划时间外，其他几项均用中文简写的数字标序号（如：活动主题等）。如有二级以上的标题，可采用不同数字来区分（1>(1)>①>l）。全文使用小三、仿宋，倍距，项目名称与序号以加粗来区别具体文字内容。具体如下： 1．（活动标题）2号宋体、加粗，将活动单位、活动名称写清楚。 2．活动主题：反映活动主旨的口号或最精简的概括。 3．活动目的：说明活动最基本的现实意义，以及围绕学院政策、政府政策以及当代社会政治趋势等活动的抽象意义。 4．活动对象：最简洁的语言说明参与的具体对象。 5．活动时间：注明活动从举办到结束的全程时间。 6．活动地点：注明活动所涉及到的所有地点。 7．活动内容：活动流程、活动的项目设置、活动的具体要求等相关事宜。

英语感谢信万能模板

英语感谢信万能模板 导语：在英语的写作中，感谢信是很常见的。那么，英语的感想信应该怎么写呢？下面小编为大家整理了英语感谢信的万能模板，希望可以帮助到大家。 感谢信内容包括： 1、首先开头要明确的对对方提供的帮助或赠送的礼品表示谢意; 2、主体部分则需列举对方提供的帮助，说明该帮助所起的作用，或表达对所受礼品的喜爱以及以后如何使用及收藏等; 3、结尾部分需再次表达诚挚的谢意并问候对方。 感谢信的常用句型： 1．I am grateful／obliged to you for．．．我非常感谢你的…… 2．I am greatly indebted to you for what you have done．我为你所做的一切表示感激。 3．I am thankful／obliged to you for your unselfish assistance during…感谢你在……期间给予我无私的帮助。 4．I deeply appreciate your courtesy and we hope to have the opportunity of rewarding your kindness．我非常感谢你的好意，并希望有机会回报你。 5．I take this opportunity to express my deep

appreciation of your kind help you rendered me．我借此机会对你所给予我的帮助表示深深的感谢。 6. It was kind and generous of you to do this for me，and l appreciate it more than l can say．你为我这样做真是太好了，我感激不尽。 7．My appreciate to you for your generous help is beyond my words．I wish I could repay it some day．我无法用言语来表达对你的感激之情。但愿有朝一门能回报你的帮助。 8．Please accept my most cordial thanks for your timely help，which l will never forget．请接受我诚挚的谢意，感谢你及时的帮助，我将难以忘怀。 9．Words fail me when I want to express my gratitude to you．感激之情难以言表。 10．Again，I would like to express our warm thanks to you．再次向你表示感谢。 感谢信模板 Dear_________, I am writing this letter to express my sincere gratitude for___________.Had it not been for your assistance in ___________,I fear that ___________may not have____________.I’d like you to know that your

英国essay的格式

据优越论文网资深专家老师介绍，留学生平常作业太多，毕业论文又太隆重，她们大多会选择论文辅导机构完成作业，然而很多机构其实都是穿着信誉的外衣干着欺骗学生的事情，交出的稿子一看质量就很差，有的是抄袭率太高，大多复制粘贴完成的。而优越论文拿出的稿子无一不是原创。优越论文网老师现在就跟各位说说抄袭率的事情吧。 首先要知道什么是抄袭。 外国大学对于学生交上去的文章都会一一查重，使用官方检测系统检测论文的抄袭率，如果有连续13个字相同或者文章要论证的观点相同相似就是抄袭。 其次要知道抄袭一般使用的伎俩。 有的论文机构不负责任，对于学生的要求敷衍了事，交给学生的稿子没有经过抄袭率检测，学生一上交就被打回来了。其中主要有以下一些方式： 1、对于某一篇较好的文献有抄袭主要观点、整体思路和框架，在文章结尾的reference故意不放上这一篇文章。 2、从一篇文章中抄袭句子。有的是有自己的要论证的观点，但是在陈述的时候不是引用别人的某一观点，而是直接大段大段地复制，而且来自于同一篇文章。 3、从不同的文章分别复制粘贴。有的写手比较偷懒的，觉得是同一类的参考文献，可以使用的就一股脑地全贴合上去，全然不顾文章大局。 4、将中文期刊或是著作中比较符合的句子或观点直接英文翻译过去。导师基本上所有的时间都在做研究，对于某一块的文献都会看到的，正如国内的也都会看国外的文献一样，如果有的导师中文还可以的一眼就能发现。甚至对于有些太过专业的中文观点有的写手翻译不出，直接找翻译器翻译的，语法、语句、逻辑都有很大的问题。 优越论文网的辅导老师都是非常认真负责和专业的，会仔细研究学生平常上课的内容、课件，根据学生的个人风格写出专属个人的论文，会使用专业的Turn it in论文检测系统检查抄袭率，保证抄袭率绝对低于5%。优越论文老师交出的稿子是原创的，是保证通过的。如果有任何的问题，欢迎找到优越论文网，我们会竭尽全力解决您的一切问题的。

施工组织设计方案封面版面文字格式导则

深圳市建工集团股份有限公司 施工组织设计、方案封面、版面、文字格式导则（按照深圳市标准《施工组织设计编写规范》进行个别修改调整） 施工组织设计、方案的封面、版面文字格式分别见附件一～五，其中分包工程的施工方案的封面见附件四。施工组织设计、方案的封面格式，若当地政府另有要求的，从其要求。 1 封面 封面内容应包括工程名称，编制人、审核人和批准人签字，企业名称，编制日期。封面样式可参照附件一～四。 2 纸张 文字部分宜用A4纸，横道图、网络图和其它图形部分宜采用A3、A4（420×297mm、297×210mm）或A3加长纸。 3 A4纸的页面边距 上、下、左、侧页边距宜为25㎜，右侧页边距宜为20㎜；装订线应在左侧，其距离宜为8㎜；页眉边距宜为15㎜，页脚边距宜为17.5㎜。 4 字体、字号、字符间距和段落间距 正文部分的章标题字体宜采用三号宋体常规加粗字型；正文部分的节标题字体宜采用四号宋体常规加粗字型；正文部分的条以下标题字体宜采用小四号宋体常规加粗字型；正文部分的字体宜采用小四宋体常规字形；正文部分的字符间距宜采用标准值；正文部分的段落间距宜采用多倍行距：1.3倍。 文字文件编辑软件Micorosft office Word的版本，不应超过2003，超过时应得到公司技术中心认可。 5 页眉、页脚 页眉宜标识出工程名称和章节名称，页脚宜标识出施工企业名称和页码，页眉和页脚中的字体宜采用5号宋体常规字形。 6 页码 页码位置宜位于页脚右侧；A3和大于A3规格的纸可不编排页码。 7 章节条款编排顺序 施工组织设计一般分成多个章节，章、节题目宜居中，文章中的各种小标题应醒目。标题层次和格式见附录A 。 8 表格的位置 表格宜放置在靠近相关正文的地方。表格需有表名和表序号，表名宜居中，

英语作文感谢信模版

感谢信开头段常用句式和套话 i am writing to extend my sincere gratitude for...i am writing to express my thanks for... i am writing to show my sincere appreciation for...i would like to convey in this letter my heartfelt thanks to you for... i feel deeply indebted to you and i really dont know how to thank you enough for your help. 感谢信结尾段常用句式和套话 i must thank you again for your generous help.i am most grateful for your selfless donation. my true gratitude is beyond the words description.i feel most obliged to thank you once more.please accept my gratitude, now and always.★例： directions: after being involved in an accident, you were looked after by another person. write a letter: 1) mentioning what happened in the accident, 2) telling the person about your recovery, and 3) expressing your thanks. you should write with no less than 100 words on answer sheet 2. do not sign your own name at the end of the letter. use li ming instead. you do not need to write the address. 范文： dear john, i am writing to thank you for looking after me after that unfortunate accident the other day, when i was knocked off my bike by a taxi. if it had not been for your assistance in giving me first aid and taking me to a nearby hospital, i fear that the consequences might have been much more serious dear staff， i am writing to show my sincere gratitude for all of you. now that i am home and on my own again i feel extremely happy. during the time i lived at the rehabilitation center and was under your tender care, i promised myself i would write a letter of thanks as soon as i was able. abundant thanks to each one of you for your patience, expertise and genuine concern. it was you who helped me believe in myself and gave me assurance that i could walk again. i would never forget each word you said to me and the things you have done to me. forgive me for the times i lashed out at you in frustration and thank you for understanding and remaining firm with me. never stop your beautiful way of working with people. your help really means a lot to me and anyone who in trouble as well. affectionately, wang fang 译文 亲爱的全体工作人员： 我写这封信是为了表达我对你们的真诚感谢。现在我又可以一个人在家了，我真的非常高兴。我在康复中心接受你们的关照时，就已经决心只要一有时间就给你们写感谢信了。

essay 的格式

标题页 给所写文章起一个合适的标题 格式居中，二号字体，TIMES NEW ROMAN，加重

T able of contents目录页 先将写好文章中的小标题设置格式，然后这里用WORD插入引用自动生成目录，根据情况适当调整行间距，字体大小。下面是例子。 Introduction (3) Main body (3) Engineering Ethics (3) Ethics in University Education (4) Conclusion (6) References (7)

正文开始，注意行间距1.5，字体小四，TIMES NEW ROMAN,每段开始不空格，段段之间空一行 Introduction 只写一段（字数占全文10%左右） Main body Engineering Ethics According to Davison and Kock (2004), “professional Ethics concerns one's conduct of behavior and practice when carrying out professional wo rk.” There are a great many professional bodies throughout the world that put forward important institutionalized “codes of conduct and codes of practice” for their members to follow. In many counties, medical ethics, legal ethics and business ethics are repeatedly discussed by the public and even regarded compulsory to the practitioners. Engineering ethics has also been becoming an increasing concern over the past decades, during which the world witnessed some momentous events like stratospheric ozone depletion, cloning technology, the Challenger disaster and so on, which are closely related to the issue of engineering ethics. Professional bodies of engineering like the US professional engineering associations, the German Association of Engineers and the Institution of Engineers, Australia, are getting more active. Engineering codes of ethics vary by different cultures and might still remain

TOK论文格式范本

TOKEssay 1. InWhatWaysMayDisagreementAidthePursuitofKnowl edgeintheNaturalandHumanSciences? CandidateName:Sun,Wukong CandidateNumber:006543-000 SchoolName:WeiYuHighSchool SchoolCode:006543 1.在自然科学和人文科学领域中，意见分歧如何有助于探求知识？ 随着人们不断探索自然界及人类社会中的奥秘，科技日新月异，生活也逐渐改善。在这过程中，研究者之间的争论起到了不可忽视的作用。本文将从自然科学和人文科学两大科学领域的角度出发，来探讨意见分歧对于探求知识的作用。 自然科学研究无机自然界和有机自然界，旨在探寻物质的属性、掌握自然现象的本质和发生规律。它是实证性科学，研究资料中主要是事实材料、数据和有严密的数学推导。人文科学研究“包含人的活动”1，“它以人的社会存在为研究对象来揭示人的本质和人类社会的发展规律”2。不同于自然科学的是它更倾向于解释性科学，分析和说明占据了研究材料中的大部分，研究过程中归纳、推测、设想和体验的成分更多。在这两大领域中，我认为意见分歧，也就是研究者对于同一研究对象看法的不一致，对于知识的探求结果尤为有帮助。 首先，有着不同观点的研究者会通过各种证明方式否决错误的假说。当分歧双方中有一方并没有实证依据证明自己的观点时，意见分歧的帮助作用就更加显着。生物学家拉马克和达尔文都曾提出进化论——前者支持“用进废退”而后者推崇“物竞天择”。但是，拉马克的理论由于当时的科技局 1《世界百科全书9》第168页，美国《世界百科全书》编写委员会编，中文版《世界百科全书》编译委员会编译，海南出版社，2006.12 2人文科学_百度百科，，2013年2月26日访问

感谢信英文格式

感谢信英文格式 一、信函写作：称呼、正文、落款 1、审题—-判断是个人书信&事务公函 决定： 语域使用：正式：使用礼貌表达，不用缩略语(对公) 半正式：可以使用缩略和口语表达(对私) 非正式：(一般不考)——it depends 呼语：特定的写信对象：dear xx 不明确收信人：dear sir/madam, or to whom it may concern 2、正文 三段(8句)：写作目的段、细化段、感谢或者期待。 3、各种信函内容安排 8)感谢信 a.基本结构 dear…, 表示感谢; 感谢缘由及内心感受,希望回报; 再次感谢，寄予希望。 yours sincerely, li ming b.范文解析： dear jim,

i am writing to express my heartfelt gratitude. i am referring to that unfortunate accident the other day, when i was knocked off my bike by a taxi. if it had not been for your timely assistance in giving me first aid, i fear that the consequences might have been much more serious. everyone agrees that it was your quick-witted response in that emergency that has led to this satisfactory outcome. although nowadays people in mounting numbers talk about the need to be unselfish, we see very few people practice what they preach. if there were more people like you, this world would be a much nicer place. yours sincerely, li ming c.感谢信框架(重要) dear jim, i am writing to express my heartfelt gratitude. i am referring to…. if it had not been for your timely…, i fear that …. everyone agrees that it was your quick-witted response and kindness that has led to this satisfactory outcome. although nowadays people in mounting numbers talk

Essay范文及批注

Introduction （essay的introduction只有一段，但由两部分内容组成。蓝色字体的地方是introduction的第一部分，它相当于一个开篇，引出这篇essay的主旨。然后从this essay will开始是introduction的第二部分，介绍本文结构，不要再用the structure is like this这样的语句了，比较chinglish。介绍结构请统一用将来时态） Since the setting up of the first factories in the late eighteenth century, management had become a problem seriously affecting the factories’ production. Then, management was gradually recognised as an important element of the success or failure of a company. Until the nineteenth century, the systematic and scientific management theory came out with its leading thinkers, two of whom were well known as Frederick W. Taylor and Elton Mayo. Both Taylor and Mayo stated the importance of the productivity and cooperation between managers and workers.This essay will firstly discuss these similarities in their different management theories and how they relate to each other. Following this, it will explain the differences of the two theories concerning the consideration of the human beings during management. Finally, it will look at how the two theories affect the feeling of workers and support increasing the productivity and maximising the efficiency. （Introduction之后body，把文章分成几大部分讨论，每一个板块写一个小标题，加粗） Similarities and relations in management theories of Taylor and Mayo Although Taylor and Mayo have different management theories, they both aim to make workers more productive and efficient during the management. Taylor, the founder of the movement known as ‘scientific management’, states ‘The principal object of management should be to secure the maximum prosperity for the employer, coupled with the maximum prosperity for the employee’ (Taylor, 1947, p.36). According to this, workers should be trained as ‘first-class’ and follow the methods of the work which managers have carefully analysed and set up. Workers are not responsible to think about the way of doing the work, and they just do what managers 批注 [LX1]: 这个标志很重要，所有essay都必须按照这个格式来。从这里开始，就是对整个essay的主要内容分几个大的部分来进行一个概括。这个标志后的内容应为body里的内容A 批注 [LX2]: 这个标志也是必须写的，此标志后的内容应为body里的内容B 批注 [LX3]: 这个标志也是必须写的，此标志后的内容应为body里的内容C 注意：如果body里的主要内容不只是ABC，或者还又更多的D，E的话，中间的标志可以用Subsequently, and then, after that等等副词或短语做为标志来写。除了firstly 之外不要用secondly,thirdly 等序数词。 批注 [LX4]: 到此为止，introduction才算写完，introduction只能是一段，而且一定要写到半页或者以上（根据总字数来安排）。介绍结构时提到的A，B，C等每一部分内容时，可以直接复制body里每一部分的小标题 批注 [LX5]: 从第2段开始，就正式进入了essay里的body，同样，introduction里提到的内容A，就是从这里开始。 注意：以后body每段的第一句话是该段的总起句，要概括这段的中心内容 认真看完本文件能有效提高您的收入