山东建筑大学本科毕业设计说明书外文文献及翻译格式模版

附件3：

（本科毕业论文）文献、资料题目：

院（部）

专

班

姓名：张三

学号：

指导教师：张九光

翻译日期：2005.6.30

，the National Institute of Standards and Technology (NIST) has been working to develop a new encryption standard to keep government information secure ．The organization is in the final stages of an open process of selecting one or more algorithms ，or data-scrambling formulas ，for the new Advanced Encryption Standard (AES) and plans to make adecision by late summer or early fall ．The standard is slated to go into effect next year ．

AES is intended to be a stronger ，more efficient successor to Triple Data Encryption Standard (3DES)，which replaced the aging DES ，which was cracked in less than three days in July 1998．

“Until we have the AES ，3DES will still offer protection for years to come ．So there is no need to immediately switch over ，”says Edward Roback ， acting chief of the computer security division at NIST and chairman of the AES selection committee ．“What AES will offer is a more efficient algorithm ．It will be a federal standard ，but it will be widely implemented in the IT community ．”

According to Roback ，efficiency of the proposed algorithms is measured by how fast they can encrypt and decrypt information ，how fast they can present an encryption key and how much information they can encrypt ．

The AES review committee is also looking at how much space the algorithm takes up on a chip and how much memory it requires ．Roback says the selection of a more efficient AES will also result in cost savings and better use of resources ．

“DES w as designed for hardware implementations ，and we are now living in a world of much more efficient software ，and we have learned an awful lot about the design of algorithms ，”says Roback ．“When you start multiplying this with the billions of implementations done daily ，the saving on overhead on the networks will be enormous ．”

……

山东建筑大学毕业设计（或毕业论文，二选一）外文文献及译文

- 1 -

以确保政府的信息安全。该组织目前正处于为新的先进加密标准（

AES ）选择一个或几个算法或数据打乱公式的开放过程的最后阶段，并计划在夏末或秋初作出决定。此标准内定明年实施。

AES 预定为比三层数据加密标准(3DES)更强、更高效的后续标准，3DES 替代了老化的DES 加密标准，DES 在1998年7月在不到三天的时间内就被破译了。

NIST 计算机安全部的代理主管兼AES 选择委员会主席Edward Roback 说：“在我们拥有AES 之前，3DES 还将在今后几年提供保护。所以没有必要马上转换。AES 所提供的是一种更有效的算法。它将是一项联邦标准，但它将在IT 界广泛实施。”

据Roback 称，提议中的算法的效率是通过对信息加密和解密有多快、给出加密密钥有多快以及能对多少信息加密等几个方面进行测量的。

AES 评价委员会也要看算法占据芯片上多少空间和需要多少内存。Roback 说，选择一个更高效的AES 也会带来成本的节省和资源的更好利用。

Roback 说：“DES 是为硬件实现而设计的，而我们现在处于软件更高效的世界，我们对算法的设计有极多的了解。当我们开始大规模使用此算法，每天实现几十亿次的加密时，（算法带来的）网络开销的节省将是巨大的。”

……

建筑类外文文献及中文翻译

forced concrete structure reinforced with an overviewRein Since the reform and opening up, with the national economy's rapid and sustained development of a reinforced concrete structure built, reinforced with the development of technology has been great. Therefore, to promote the use of advanced technology reinforced connecting to improve project quality and speed up the pace of construction, improve labor productivity, reduce costs, and is of great significance. Reinforced steel bars connecting technologies can be divided into two broad categories linking welding machinery and steel. There are six types of welding steel welding methods, and some apply to the prefabricated plant, and some apply to the construction site, some of both apply. There are three types of machinery commonly used reinforcement linking method primarily applicable to the construction site. Ways has its own characteristics and different application, and in the continuous development and improvement. In actual production, should be based on specific conditions of work, working environment and technical requirements, the choice of suitable methods to achieve the best overall efficiency. 1、steel mechanical link 1.1 radial squeeze link Will be a steel sleeve in two sets to the highly-reinforced Department with superhigh pressure hydraulic equipment (squeeze tongs) along steel sleeve radial squeeze steel casing, in squeezing out tongs squeeze pressure role of a steel sleeve plasticity deformation closely integrated with reinforced through reinforced steel sleeve and Wang Liang's Position will be two solid steel bars linked Characteristic: Connect intensity to be high, performance reliable, can bear high stress draw and pigeonhole the load and tired load repeatedly.

土木工程毕业设计外文文献翻译修订版

土木工程毕业设计外文文献翻译修订版 IBMT standardization office【IBMT5AB-IBMT08-IBMT2C-ZZT18】

外文文献翻译 Reinforced Concrete （来自《土木工程英语》） Concrete and reinforced concrete are used as building materials in every country. In many, including the United States and Canada, reinforced concrete is a dominant structural material in engineered construction. The universal nature of reinforced concrete construction stems from the wide availability of reinforcing bars and the constituents of concrete, gravel, sand, and cement, the relatively simple skills required in concrete construction, and the economy of reinforced concrete compared to other forms of construction. Concrete and reinforced concrete are used in bridges, buildings of all sorts underground structures, water tanks, television towers, offshore oil exploration and production structures, dams, and even in ships. Reinforced concrete structures may be cast-in-place concrete, constructed in their final location, or they may be precast concrete produced in a factory and erected at the construction site. Concrete structures may be severe and functional in design, or the shape and layout and be whimsical and artistic. Few other building materials off the architect and engineer such versatility and scope. Concrete is strong in compression but weak in tension. As a result, cracks develop whenever loads, or restrained shrinkage of temperature changes, give rise to tensile stresses in excess of the tensile strength of the concrete. In

土木工程外文文献翻译

专业资料 学院： 专业：土木工程 姓名： 学号： 外文出处：Structural Systems to resist (用外文写) Lateral loads 附件：1.外文资料翻译译文；2.外文原文。

附件1：外文资料翻译译文 抗侧向荷载的结构体系 常用的结构体系 若已测出荷载量达数千万磅重，那么在高层建筑设计中就没有多少可以进行极其复杂的构思余地了。确实，较好的高层建筑普遍具有构思简单、表现明晰的特点。 这并不是说没有进行宏观构思的余地。实际上，正是因为有了这种宏观的构思，新奇的高层建筑体系才得以发展，可能更重要的是：几年以前才出现的一些新概念在今天的技术中已经变得平常了。 如果忽略一些与建筑材料密切相关的概念不谈，高层建筑里最为常用的结构体系便可分为如下几类： 1.抗弯矩框架。 2.支撑框架，包括偏心支撑框架。 3.剪力墙，包括钢板剪力墙。 4.筒中框架。 5.筒中筒结构。 6.核心交互结构。 7. 框格体系或束筒体系。 特别是由于最近趋向于更复杂的建筑形式，同时也需要增加刚度以抵抗几力和地震力，大多数高层建筑都具有由框架、支撑构架、剪力墙和相关体系相结合而构成的体系。而且，就较高的建筑物而言，大多数都是由交互式构件组成三维陈列。 将这些构件结合起来的方法正是高层建筑设计方法的本质。其结合方式需要在考虑环境、功能和费用后再发展，以便提供促使建筑发展达到新高度的有效结构。这并

不是说富于想象力的结构设计就能够创造出伟大建筑。正相反，有许多例优美的建筑仅得到结构工程师适当的支持就被创造出来了，然而，如果没有天赋甚厚的建筑师的创造力的指导，那么，得以发展的就只能是好的结构，并非是伟大的建筑。无论如何，要想创造出高层建筑真正非凡的设计，两者都需要最好的。 虽然在文献中通常可以见到有关这七种体系的全面性讨论，但是在这里还值得进一步讨论。设计方法的本质贯穿于整个讨论。设计方法的本质贯穿于整个讨论中。 抗弯矩框架 抗弯矩框架也许是低，中高度的建筑中常用的体系，它具有线性水平构件和垂直构件在接头处基本刚接之特点。这种框架用作独立的体系，或者和其他体系结合起来使用，以便提供所需要水平荷载抵抗力。对于较高的高层建筑，可能会发现该本系不宜作为独立体系，这是因为在侧向力的作用下难以调动足够的刚度。 我们可以利用STRESS，STRUDL 或者其他大量合适的计算机程序进行结构分析。所谓的门架法分析或悬臂法分析在当今的技术中无一席之地，由于柱梁节点固有柔性，并且由于初步设计应该力求突出体系的弱点，所以在初析中使用框架的中心距尺寸设计是司空惯的。当然，在设计的后期阶段，实际地评价结点的变形很有必要。 支撑框架 支撑框架实际上刚度比抗弯矩框架强，在高层建筑中也得到更广泛的应用。这种体系以其结点处铰接或则接的线性水平构件、垂直构件和斜撑构件而具特色，它通常与其他体系共同用于较高的建筑，并且作为一种独立的体系用在低、中高度的建筑中。

商业建筑外文文献翻译)

Commercial Buildings Abstract: A guide and general reference on electrical design for commercial buildings is provided. It covers load characteristics; voltage considerations; power sources and distribution apparatus; controllers; services, vaults, and electrical equipment rooms; wiring systems; systems protection and coordination; lighting; electric space conditioning; transportation; communication systems planning; facility automation; expansion, modernization, and rehabilitation; special requirements by occupancy; and electrical energy management. Although directed to the power oriented engineer with limited commercial building experience, it can be an aid to all engineers responsible for the electrical design of commercial buildings. This recommended practice is not intended to be a complete handbook; however, it can direct the engineer to texts, periodicals, and references for commercial buildings and act as a guide through the myriad of codes, standards, and practices published by the IEEE, other professional associations, and governmental bodies. Keywords: Commercial buildings, electric power systems, load characteristics 1. Introduction 1.1 Scope This recommended practice will probably be of greatest value to the power oriented engineer with limited commercial building experience. It can also be an aid to all engineers responsible for the electrical design of commercial buildings. However, it is not intended as a replacement for the many excellent engineering texts and handbooks commonly in use, nor is it detailed enough to be a design manual. It should be considered a guide and general reference on electrical design for commercial buildings. 1.2 Commercial Buildings The term “commercial, residential, and institutional buildings”as used in this chapter, encompasses all buildings other than industrial buildings and private dwellings. It includes office and apartment buildings, hotels, schools, and churches, marine, air, railway, and bus terminals, department stores, retail shops, governmental buildings, hospitals, nursing homes, mental and correctional institutions, theaters, sports arenas, and other buildings serving the public directly. Buildings, or parts of buildings, within industrial complexes, which are used as offices or medical facilities or for similar nonindustrial purposes, fall within the scope of this recommended practice. Today’s commercial buildings, because of their increasing size and complexity, have become more and more dependent upon adequate and reliable electric systems. One can better understand the complex nature of modern commercial buildings by examining the systems, equipment, and facilities listed in 1.2.1. 1.2.2 Electrical Design Elements In spite of the wide variety of commercial, residential, and institutional buildings, some electrical design elements are common to all. These elements, listed below, will be discussed generally in this section and in detail in the remaining sections of this recommended practice. The principal design elements considered in the design of the power, lighting, and auxiliary systems include: 1) Magnitudes, quality, characteristics, demand, and coincidence or diversity of loads and load factors 2) Service, distribution, and utilization voltages and voltage regulation 3) Flexibility and provisions for expansion

毕业设计外文翻译原文

编号： 毕业设计(论文)外文翻译 （原文） 院（系）：应用科技学院 专业：机械设计制造及其自动化 学生姓名：邓瑜 学号：0501120501 指导教师单位：应用科技学院 姓名：黄小能 职称： 2009年 5 月20 日

The Injection Molding The Introduction of Molds The mold is at the core of a plastic manufacturing process because its cavity gives a part its shape. This makes the mold at least as critical-and many cases more so-for the quality of the end product as, for example, the plasticiting unit or other components of the processing equipment. Mold Material Depending on the processing parameters for the various processing methods as well as the length of the production run, the number of finished products to be produced, molds for plastics processing must satisfy a great variety of requirements. It is therefore not surprising that molds can be made from a very broad spectrum of materials, including-from a technical standpoint-such exotic materials as paper matched and plaster. However, because most processes require high pressures, often combined with high temperatures, metals still represent by far the most important material group, with steel being the predominant metal. It is interesting in this regard that, in many cases, the selection of the mold material is not only a question of material properties and an optimum price-to-performance ratio but also that the methods used to produce the mold, and thus the entire design, can be influenced. A typical example can be seen in the choice between cast metal molds, with their very different cooling systems, compared to machined molds. In addition, the production technique can also have an effect; for instance, it is often reported that, for the sake of simplicity, a prototype mold is frequently machined from solid stock with the aid of the latest technology such as computer-aided (CAD) and computer-integrated manufacturing (CIM). In contrast to the previously used methods based on the use of patterns, the use of CAD and CAM often represents the more economical solution today, not only because this production capability is available pin-house but also because with any other technique an order would have to be placed with an outside supplier. Overall, although high-grade materials are often used, as a rule standard materials are used in mold making. New, state-of-the art (high-performance) materials, such as ceramics, for instance, are almost completely absent. This may be related to the fact that their desirable characteristics, such as constant properties up to very high temperatures, are not required on molds, whereas their negative characteristics, e. g. low tensile strength and poor thermal conductivity, have a clearly related to ceramics, such as sintered material, is found in mild making only to a limited degree. This refers less to the modern materials and components

建筑外文文献及翻译论文资料

外文原文 Study on Human Resource Allocation in Multi-Project Based on the Priority and the Cost of Projects Lin Jingjing , Zhou Guohua SchoolofEconomics and management, Southwest Jiao tong University ,610031 ,China Abstract----This paper put forward the affecting factors of project’s priority. which is introduced into a multi-objective optimization model for human resource allocation in multi-project environment . The objectives of the model were the minimum cost loss due to the delay of the time limit of the projects and the minimum delay of the project with the highest priority .Then a Genetic Algorithm to solve the model was introduced. Finally, a numerical example was used to testify the feasibility of the model and the algorithm. Index Terms—Genetic Algorithm, Human Resource Allocation, Multi-project’s project’s priority . 1.INTRODUCTION More and more enterprises are facing the challenge of multi-project management, which has been the focus among researches on project management. In multi-project environment ,the share are competition of resources such as capital , time and human resources often occur .Therefore , it’s critical to schedule projects in order to satisfy the different resource demands and to shorten the projects’duration time with resources constrained ,as in [1].For many enterprises ,the human resources are the most precious asset .So enterprises should reasonably and effectively allocate each resource , especially the human resource ,in order to shorten the time and cost of projects and to increase the benefits .Some literatures have

本科毕业设计外文文献翻译

（ 本科毕业设计外文文献翻译 学校代码： 10128 学 号： 题 目：Shear wall structural design of high-level framework 学生姓名： 学 院：土木工程学院 系 别：建筑工程系 专 业：土木工程专业（建筑工程方向） 班 级：土木08-（5）班 指导教师： (副教授)

Shear wall structural design of high-level framework Wu Jicheng Abstract: In this paper the basic concepts of manpower from the frame shear wall structure, analysis of the structural design of the content of the frame shear wall, including the seismic wall shear span ratio design, and a concrete structure in the most commonly used frame shear wall structure the design of points to note. Keywords: concrete; frame shear wall structure; high-rise buildings The wall is a modern high-rise buildings is an important building content, the size of the frame shear wall must comply with building regulations. The principle is that the larger size but the thickness must be smaller geometric features should be presented to the plate, the force is close to cylindrical. The wall shear wall structure is a flat component. Its exposure to the force along the plane level of the role of shear and moment, must also take into account the vertical pressure. Operate under the combined action of bending moments and axial force and shear force by the cantilever deep beam under the action of the force level to look into the bottom mounted on the basis of. Shear wall is divided into a whole wall and the associated shear wall in the actual project, a whole wall for example, such as general housing construction in the gable or fish bone structure film walls and small openings wall. Coupled Shear walls are connected by the coupling beam shear wall. But because the

毕业设计外文文献翻译(可编辑修改word版)

毕业设计外文文献翻译 专业 学生姓名 班级 学号 指导教师 优集学院

外文资料名称：Knowledge-Based Engineeri- -ng Design Methodology 外文资料出处：Int.J.Engng Ed.Vol.16.No.1 附件：1.外文资料翻译译文 2.外文原文

1.背景基于知识工程(KBE)设计方法 D. E. CALKINS 复杂系统的发展需要很多工程和管理方面的知识、决策，它要满足很多竞争性的 要求。设计被认为是决定产品最终形态、成本、可靠性、市场接受程度的首要因素。 高级别的工程设计和分析过程(概念设计阶段)特别重要，因为大多数的生命周期成本 和整体系统的质量都在这个阶段。产品成本的压缩最可能发生在产品设计的最初阶段。整个生命周期阶段大约百分之七十的成本花费在概念设计阶段结束时，缩短设计周期的关键是缩短概念设计阶段，这样同时也减少了工程的重新设计工作量。 工程权衡过程中采用良好的估计和非正式的启发进行概念设计。传统CAD 工具对概念设计阶段的支持非常有限。有必要，进行涉及多个学科的交流合作来快速进行设计分析(包括性能，成本，可靠性等)。最后，必须能够管理大量的特定领域的知识。解决方案是在概念设计阶段包含进更过资源，通过消除重新设计来缩短整个产品的时间。 所有这些因素都主张采取综合设计工具和环境，以在早期的综合设计阶段提供帮助。这种集成设计工具能够使由不同学科的工程师、设计者在面对复杂的需求和约束时能够对设计意图达成共识。那个设计工具可以让设计团队研究在更高级别上的更多配置细节。问题就是架构一个设计工具，以满足所有这些要求。 2.虚拟(数字)原型模型 现在需要是一种代表产品设计为得到一将允许一产品的早发展和评价的真实事 实上原型的过程的方式。虚拟样机将取代传统的物理样机，并允许设计工程师，研究“假设”的情况，同时反复更新他们的设计。真正的虚拟原型，不仅代表形状和形式，即几何形状，它也代表如重量，材料，性能和制造工艺的非几何属性。设计人员希望设计的表述，将成为一个既有几何又有非几何属性的物理原型确切的表示。 产品表示法已经从二维的形状和几何的形式字形绘画的表示法移动向充分的三维几何模型表示法。设计工具，用于设计工程领域的需要，显然必须有刚才讨论的所有工具的属性。它必须结合计算机辅助设计系统的几何表示法，能做对程序语言的工程分析和代表设计知识在一个专家系统。一个真正的虚拟原型包含此全方位设计知识。

建筑-外文翻译

外文文献： Risk Analysis of the International Construction Project By: Paul Stanford Kupakuwana Cost Engineering Vol. 51/No. 9 September 2009 ABSTRACT This analysis used a case study methodology to analyse the issues surrounding the partial collapse of the roof of a building housing the headquarters of the Standards Association of Zimbabwe (SAZ). In particular, it examined the prior roles played by the team of construction professionals. The analysis revealed that the SAZ’s traditional construction project was generally characterized by high risk. There was a clear indication of the failure of a contractor and architects in preventing and/or mitigating potential construction problems as alleged by the plaintiff. It was reasonable to conclude that between them the defects should have been detected earlier and rectified in good time before the partial roof failure. It appeared justified for the plaintiff to have brought a negligence claim against both the contractor and the architects. The risk analysis facilitated, through its multi-dimensional approach to a critical examination of a construction problem, the identification of an effective risk management strategy for future construction projects. It further served to emphasize the point that clients are becoming more demanding, more discerning, and less willing to accept risk without recompense. Clients do not want surprise, and are more likely to engage in litigation when things go wrong. KEY WORDS:Arbitration, claims, construction, contracts, litigation, project and risk The structural design of the reinforced concrete elements was done by consulting engineers Knight Piesold (KP). Quantity surveying services were provided by Hawkins, Leshnick & Bath (HLB). The contract was awarded to Central African Building Corporation (CABCO) who was also responsible for the provision of a specialist roof structure using patented “gang nail” roof

工程建筑电气文献与外文翻译

建筑电气 电气工程设计包括两个主要的设计方面。主要是一部分的电能的转换及分配和电力的供配、照明系统、防雷接地系统。一般来说,建筑主要的变化包括:高压和低压配电系统、变压器、备用电源系统。电力系统包括配电和控制，室内和室外照明系统包括所有类型的照明，防雷系统包括入侵波防护、闪电传感器、接地、等电位连接和局部等电位连接等。辅助等电位连接等。在短短的20年里,系统在技术和产品的面貌发生了翻天覆地的变化。许多的设计理念也发生了巨大的变化。开关设备如高压系统的第一个断路器油断路器，后来油断路器的逐步发展,不仅规模大,但是一般都包含油物质。由于开关设备尺寸较大,我们还必须建立独立的设备房间,占据了大量的建筑面积。现在真空断路器和六氟化硫断路器,不仅体积小,而且短路容量大，外壳尺寸远小于原来的橱柜，并且断路器没有任何油,防火性能大大提高。而且断路器和其他低压设备在一个房间里,这样即节省空间又方便管理。过去大容量的低压断路器,短路电流容量逐渐变大,规模也逐渐变小,而且更加稳定,使系统运行更加安全可靠,为设计带来了方便。向着智能化低压断路器方向发展,断路器各种参数可以通过总线工业控制,信号直接传输到计算机。 干式变压器的出现,对建筑电气设计带来了极大的方便,因为没有变压器油泄漏和火灾的可能性,以便它可以很容易地安装在建筑本身,甚至直接到负荷中心。它还消除变压器对油的需求限制,构建大容量设备时可以使用干式变压器。在实际工程设计中曾应用四个台湾2500kVA干式变压器。 在使用紧急发电机方面,从性能和尺寸的角度来看,比过去进步很多。除了使用柴油发电机；应急照明使用EPS备用电源；中断供电在一个毫秒以内的设备,可以使用UPS。 电力设备的控制从单一元件的控制到控制继电器控制变化。除了更好的性能的各种组件的规模较小,也降低控制箱的规模。由于数字技术更多的运用于控制能达到最佳的控制状态来控制设备。进一步提高了节能的效果。 照明系统从过去单一光源、灯具和低效率的状态向更广泛的前景发展。建筑中使用的光源可供选择的品种数量很多。光的发光效率和色调在向着高效的方向发展,灯具不断地改进其效率和不同形式的灯具运用于不同场合。例如,普通的荧光灯镇流器由普通的镇流器向节能型镇流器方向发展。还对谐波组件的大小进行精简,生产低谐波电子镇流器。许多措施如配件和灯具的使用,可以满足设计要求,同时能实现不同的体系结构、照明要求的各种场所。无论照明和室内装饰照明还

毕业设计英文文献翻译

青岛大学 毕业论文(设计)科技文献翻译 院系：自动化工程学院控制工程系 专业：自动化 班级：2009级4班 姓名：史发涛 指导教师：于金鹏 2013年4月10日

Providing Integrated Condition Monitoring Solutions for World Class Performance Rockwell Automation is a premier provider of Integrated Condition Monitoring Solutions (ICMS) to all major industry segments. Offering the latest state-of-the art technology in vibration analysis, oil analysis, on-line surveillance and protection systems,remote monitoring, as well as outstanding training and customer support services. Through strategic alliances with major Computerized Maintenance Management Systems (CMMS) providers Rockwell Automation can now provide integrated systems that provide critical machinery information throughout the enterprise. Portable Systems Enpac The Enpac? is a Windows CE based 2-channel high performance data collector and signal analyzer. The Enpac? collects field data, includi ng vibration information and process variables. Enpac? allows easy condition monitoring of equipment found in many process industries such as power generation, petrochemical, pulp and paper, and primary metals.The Enpac? features a built in optical (laser) tachometer, a choice of either a 1/8 or 1/4 VGA resolution screen, ability to store data on standard Type I or Type II PCMCIA cards and on-line contextsensitive HELP, built in to all applications. Online Systems Rockwell Automation offers a complete range of online hardware and software systems designed to meet your machinery protection and condition monitoring needs. When you need to protect your critical machinery assets the 6600 Series machinery protection system provides continuous monitoring. The Enw atch? Online Surveillance System is a cost-effective solution for monitoring the condition of the important machines in your plant.The 6600 Series and Enwatch? systems can be integrated seamlessly with Emonitor Odyssey?or Enshare? machinery information software. This integrated solution will provide you with a complete picture of the condition of your plant. Entrx When you need to understand how your rotating machinery is performing then Entrx is the professional’s tool. Entrx provides the means for reliable and consistent data acquisition for your entire steady state and transient machine operating modes. Entrx data acquisition hardware is fully configurable by the user and is capable of collecting data in both multiplexed and simultaneous / continuous modes. Graphical presentations of your machinery help to provide a visual display of what is happening to your machinery.