论文英文文献翻译
河南科技学院新科学院2014 届本科毕业设计
中英文翻译
学生姓名：李媛媛
所在院系：新科学院信工系所学专业：信息工程
导师姓名：洪新华
完成时间：2014-04-15
单片机简介
单片机又称单片微控制器，它不是完成某一个逻辑功能的芯片，而是把一个计算机系统集成到一个芯片上。概括的讲：一块芯片就成了一台计算机。它的体积小、质量轻、价格便宜、为学习、应用和开发提供了便利条件。同时，学习使用单片机是了解计算机原理与结构的最佳选择。
单片机内部也用和电脑功能类似的模块，比如CPU，内存，并行总线，还有和硬盘作用相同的存储器件，不同的是它的这些部件性能都相对我们的家用电脑弱很多，不过价钱也是低的，一般不超过10元即可，用它来做一些控制电器一类不是很复杂的工作足矣了。我们现在用的全自动滚筒洗农机、排烟罩、VCD等等的家电里面都可以看到它的身影！它主要是作为控制部分的核心部件。
它是一种存线式实时控制计算机，在线式就是现场控制，需要的是有较强的抗干扰能力，较低的成本，这也是和离线式计算机的（比如家用PC）的主要区别。
单片机是靠程序的，并且可以修改。通过不同的程序实现不同的功能，尤其是特殊的独特的一些功能，这是别的器件需要费很多人力气才能做到的，有些则是花人力气也很难做到的。一个不是很复杂的功能要是用美同50年代开发的74系列，或者60年代的CD4000系列这些纯硬件来搞定的话，电路一定是一块大PCB板！但是如果要是用美国70年代成功投放市场的系列单片机，结果就会有天壤之别！只因为单片机的通过你编写的程序可以实现高科能，高效率，以及高可靠性！
CPU(中央处理单元)是数字计算机的重要组成部分，其目的是对从内存中接收的指令进行译码，同时对存储于内部寄存器、存储器或输入输出接口单元的数据惊醒传输、算术运算、逻辑运算以及控制运算。在外部，CPU位转换指令数据和控制信息提供一个或多个总线并从组件连接到它。一个微控制器出现在普通电脑的键盘和检测器中，但是这些组件也被屏蔽。在这种微控制器中，与我们所讨论的CPU可能不同。字长也许更短，编制数量少，指令集有限。相对而言，性能差，但对完成任务来说足够了。最重要的是它的微控制器的成本很低，符合成本效应。
由于单片机对成本是敏感的，所以目前占统治地位的软件还是最低级汇编语言，它是除了二进制机器码以上最低级的语言了，既然这么低级为什么还要用呢？很多高级的语言已经达到了可视化编程的水平为什么不用呢？原因简单，就是单片机没有家用计算机那样的CPU，也没有像硬盘那样的海量存储设备。一个可视化高级语言编写的小程序里面即使只有一个按钮，也会达到几十K的尺寸！对于家用PC的硬盘来讲没什么，可是对于单片机来讲是不能接受的。单片机在硬件资源方面的利用率必须很高才行，所以汇编虽然原始却还是在大量使用。一样的道理，如果把巨型计算机上的操作系统和应用软件拿到家用PC上来运行，家用PC的也是承受不了的。
可以说，二十世纪跨越了三个“电”的时代，即电气时代、电子时代和现已进入的电脑时
代。不过，这种电脑，通常是指个人计算机，简称PC机。它白主机、键盘、显示器等组成。还有一类计算机，人多数人却不怎么熟悉。这种计算机就是把智能赋予各种机械的单片机（亦称微控制器）。顾名思义，这种计算机的最小系统只用了一片集成电路，即可进行简单运算和控制。因为它体积小，通常都藏在被控机械的“肚子”里。它在整个装置中，起着有如人类头脑的作用，它出了毛病，整个装置就瘫痪了。现在，这种单片机的使用领域已十分广泛，如科能仪表、实时T控、通讯设备、导航系统、家用电器等。各种产品。一旦用上了单片机，就能起到使产品升级换代的功效，常在产品名称前冠以形容词一一“智能型”，如智能型洗衣机等。现在有些工厂的技术人员或其它业余电子开发者搞出来的某些产品，不是电路太复杂，就是功能太简单且极易被仿制。究其原因，可能就卡在产品未使用单片机或其它可编程逻辑器件上。
Single chip brief introduction
The monolithic integrated circuit said that the monolithic micro controller, it is not completes some logical function the chip, but integrates a computer system to a chip on. Summary speaking: A chip has become a computer. Its volume is small, the quality is light, and the price cheap, for the study, the application and the development has provided the convenient condition. At the same time, the study use monolithic integrated circuit is understands the computer principle and the structure best choice.
The monolithic integrated circuit interior also uses with the computer function similar module, for instance CPU, memory, parallel main line, but also has with the hard disk behave identically the memory component7 what is different is its these part performance is opposite our home-use computer weak many, but the price is also low, generally does not surpass 10 Yuan then Made some control electric appliance one kind with it is not the 'very complex work foot, We use now the completely automatic drum washer, the platoon petti-coat pipe: VCD and so on Inside the electrical appliances may see its form! It is mainly takes the control section the core part.
It is one kind of online -like real-time control computer, online -like is the scene control, needs to have the strong antijamming ability, the low cost, this is also and the off-line type computer (for instance home use PC,) main difference
The monolithic integrated circuit is depending on the procedure, and may revise. Realizes the different function through the different procedure, particularly special unique some functions, this is other component needs to take the very big effort to be able to achieve, some are the flowered big
strength is also very difficult to achieve. One is not the very complex function, if develops in the 50s with the US 74 series, or the 60s's CD4000 series these pure hardware do decides, the electric circuit certainly arc a big PCB board ! But if, if succeeded in the 70s with the US puts in the market the series monolithic integrated circuit, the result will have the huge difference. Because only the monolithic integrated circuit compiles through you the procedure may realize the high intelligence, high efficiency, as well as redundant reliability
The CPU is the key component of a digital computer. Its purpose is to decode instruction received from memory and perform transfers, arithmetic, logic, and control operations with data stored in internal registers, memory, or I/O interface units. Externally, the CPU provides one or more buses for transferring instructions, data, and control information to and from components connected to it. A micro controller is present in the keyboard and in the monitor in the generic computer; thus these components are also shaded. In such micro controllers, the CPU may be quite different from those discussed in this chapter. The word lengths may be short, the number of registers small, and the instruction sets limited. Performance, relatively speaking, is poor, but adequate for the task. Most important, the cost of these micro controllers is very low, making their use cost effective.
Because the monolithic integrated circuit to the cost is sensitive, therefore present occupies the dominant status the software is the most preliminary assembly language7 it was except the binary machine code above the most preliminary language, since why were such preliminary must use?
Why high-level did the language already achieve the visualization programming level not to use? The reason is very simple, is the monolithic integrated circuit docs not have home computer such CPU, and also has not looked like the hard disk such mass memory equipment. Inside even if a visualization higher order language compilation script only then a button, also will achieve several dozens K the sizes! Does not speak anything regarding the home use PC hard disk, but says regarding the monolithic integrated circuit cannot accept. The monolithic integrated circuit in the hardware source aspect's use factor must very Gao Caixing, therefore assembly, although primitive actually massively is using, Same truth, if attains supercomputer's on operating system and the application software home use PC to come up the movement, home use PC could also not withstand.
It can be said that the 20th century surmounted three "the electricity" the time, namely the electrical time, the Electronic Age and already entered computer time. However, this kind of computer, usually refers to the personal computer, is called PC machine. It by the main engine, the keyboard, the monitor and so on is composed. Also has a kind of computer, most people actually not how familiar. This kind of computer is entrusts with the intelligence each kind of mechanical
monolithic integrated circuit (also to call micro controller). , This kind of computer's smallest system only has used as the name suggests a piece of integrated circuit, then carries on the simple operation and the control. Because its volume is small, usually hides in is accused the machinery "the belly". It in the entire installment, plays is having like the human brains role, it went wrong, the entire installment paralyzed. Now, this kind of monolithic integrated circuit's use domain already very widespread, like the intelligent measuring appliance, the solid work paid by time control, the communication equipment, the guidance system, the domestic electric appliances and so on, Once each product used the monolithic integrated circuit, could get up causes the effect which the product turned to a new generation, often before product range crown by adjective---- ‘intelligence’, like intelligence washer and so on. Now some factory's technical personnel or other extra-curricular electronic exploiter do certain products, are not the electric circuit are too complex, is the function is too simple, and is imitated extremely easily. Investigates its reason, possibly on card, in the product has not used on the monolithic integrated circuit or other programmable logical component.
总有一天你会渐渐明白，对自己笑的人不一定是真爱，对方表面的伪善是为博取信赖，暗里他可能会伺机将你伤害。
总有一天你会渐渐明白，不是所有人都对你心门敞开，即使你用善良和真心对待，有的人依然会悄悄将你出卖。
总有一天你会渐渐明白，哪怕你拿到了幸福的号码牌，命运之神也不一定对你温柔相待，你的余生仍有可能会被忧伤覆盖。
总有一天你会渐渐明白，人世间每个人都会有孽缘和无奈，有的人不值得你为他付出和慷慨，命中注定的灾祸你想躲也躲不开。
总有一天你会渐渐明白，不管你在人群中出不出彩，不管你对生活认真抑或懈怠，该来的一切总是会因你而来。
总有一天你会渐渐明白，人生总有预料不到的惊喜和意外，纵然你处在绝望的谷底和天台，转身就有可能看到晴天驱走阴霾。
总有一天你会渐渐明白，无论人生之路宽畅还是狭窄，如果你能用勇敢和坦然对待，一切困难都不是前进的阻碍。
天下总有地方是专属于你的舞台，你的江湖你才是真正的主宰，对于前尘和过往少问应不应该，无论何处你都要展现自己的风采。
别去管自己是不是栋梁人才，世上每个人都是特别的存在，无论你踏步于尘世内外，尽力和无悔才是对命运最好的交差。
这段时间，被电视剧《知否》刷屏了。明兰和顾二叔幸福甜蜜的婚姻，让不少网友唏嘘羡慕，有人说，“这部剧简直就是现代婚姻的教科书。”
剧中庶女出身，却高嫁侯府，被顾二叔万千宠爱的明兰，把一段很多人都不看好的婚姻，过成了最幸福的样子。
细细思量，与她身上鲜明而独特的三种品质是分不开的。
自信独立，不卑不亢
明兰嫁入侯府后，面对侯府小秦氏等人的挑衅，毫不胆怯。从巧妙应对顾家长辈的发难，到立院别住、人前立威，明兰都能靠着她的聪慧和果敢，不卑不亢地处理。
屡屡想出面维护明兰的顾廷烨，也被明兰的表现所惊喜到，连小秦氏也只能兀自生气感叹，“我真是小看了这个庶女，能演会装，识字记账都不在话下……”
在大多数女人都靠婚姻才能实现自我价值的宋代，明兰一直就看得通透，这实在难能可贵。
出阁前，她就对祖母说，“若为了在男人面前争一口饭吃，反倒把自己变成面目可憎的疯婆子，这一生多不划算”.结婚后，婢女问她，“若是侯爷心不在了该如何”?她坦然回答，“那我们便只有守住自己。”
对她而言，爱情，有，则锦上添花，没有，也没有关系。只要守住自己，亦能守住自己生命中的一方晴空。这样的女人，不管经历什么，也既能与男人比肩同行，又能独自傲然绽放。
去年很火的《我的前半生》里的罗子君，尽管以前的她穿金戴银，背名牌包，喷贵香水，过着养尊处优的生活，看似很有品位，实际上却恰恰相反。她所拥有的东西都是因为“陈太太”这个身份得来的，所以一旦失去了这个身份后，她变得一无所有。
后来她终于明白了这样的人生只是美丽的泡沫，浮华的表面，糟糠的内里。当她努力抛弃这种依附于人的生活后，成为独立的女性后，她的品位也渐渐浮现出来了，连职场精英贺涵都被吸引住了。
正如亦舒在书里也写到的那样，“没有任何人会成为，你以为的今生今世的避风港”.
幸福的婚姻，从来都不是谁攀缘了谁，不是谁滋养了谁，而是两个独立的个体，彼此独立，相互成就。
理解宽容，不急不躁
明兰的丈夫顾庭烨自幼失恃，深陷繁复驳杂的家事囹圄，他看似玩世不恭，不学无术，实则有勇有谋，重情重义。他自幼缺少母爱，受尽家族的白眼和欺凌，内心渴望家庭的安定和温暖。
顾廷烨建功立业后，外人只看重他的地位和富贵，而明兰，却明白他所有的艰辛和不易，她有礼有节地与小秦氏对抗，认真细致地看护经营着他用命搏来的家产，视如己出地教导蓉儿读书学习，支持顾廷烨去寻找流落在外的儿子昌儿，甚至大度地接受顾廷烨姑母送来的妾室，只为了能让夫君不被内室家务所烦扰，全心全力地拼事业。
明兰深知，每个人都有缺点，都有过去，但人总要向前看。她善解人意，不急不躁，大度地包容了他被人所鄙夷嘲笑的过去，用心地护着他心中重要的人，给了他一个安宁温馨的家。
这份理解和宽容，对深受家庭之苦的顾廷烨而言，极为可贵，因此，也让他对明兰的爱，更深了一层。
黄磊和孙莉算得上是娱乐圈的模范夫妻，在一起二十多年未曾红过脸。黄磊曾说过，“我太太这样的女人，其实不罕见，应该属于普及型。但在我心中，却是只此一款，不退不换。”
两人在相处的过程中也从不把爱当作理所当然，而是互相理解，互相体贴。婚后孙莉慢慢退出了演艺圈，将大半的精力放在了家庭和孩子身上。黄磊从不让孙莉进厨房，“家里有一个人会做饭就够了，我愿意为她做一辈子的饭。”正是双方将彼此的付出看在眼里，才会相互理解，相互支持，共同拥有了一段甜蜜的婚姻。
正如泰戈尔所说，“爱情是理解和体贴的别名”.
好的婚姻，就是双方在对彼此的理解和包容里，一次次地爱上。
懂得放弃，不怨不艾
剧情刚开始的时候，明兰就遇见了齐衡，身为平宁郡主的独子，齐衡注定是齐国公府未来的继承人。这个温润如玉的谦谦君子，对明兰一片痴心，明兰也在心底燃起了爱情的火花。
但是，邕王的女儿对齐衡一见倾心，为了让女儿得到今生至爱，邕王扣押了齐衡的父亲，并以此相逼，最后，齐衡只能无奈放手，两人也就此错过。
在初恋夭折时，明兰也哭过消沉过。但她深知，这样做是没有任何意义的，便又逼迫自己尽快振作了起来。
与顾庭烨结婚后，她便努力彻底忘掉了这段刻骨铭心的初恋，一心一意地与顾庭烨过日子。在齐衡多次在朝堂上参奏丈夫，屡惹事端的情况下，她更是勇敢教说齐衡，霸气护夫。
当一段恋情衰败的时候，她并没有把爱情看得比天高，为之寻死觅活，也没有执迷不悟，陷入自怨自艾的泥潭，而是懂得适时放手，努力过好自己以后的人生。她的这份睿智和对爱情的忠贞，也让丈夫顾庭烨爱她爱得更深。
每个人的人生，或许都会经历几段刻骨铭心的感情，但一旦机缘不再，不得不分开的时候，就一定要懂得放下过去，让心彻底归零，不要让自己陷入烦恼和忧伤的深渊，而是要勇敢自信地去面对一段新的生活。
论文外文文献翻译3000字左右
南京航空航天大学金城学院 毕业设计（论文）外文文献翻译 系部经济系 专业国际经济与贸易 学生姓名陈雅琼学号2011051115 指导教师邓晶职称副教授 2015年5月
Economic policy,tourism trade and productive diversification （Excerpt） Iza Lejárraga,Peter Walkenhorst The broad lesson that can be inferred from the analysis is that promoting tourism linkages with the productive capabilities of a host country is a multi-faceted approach influenced by a variety of country conditions.Among these,fixed or semi-fixed factors of production,such as land,labor,or capital,seem to have a relatively minor influence.Within the domain of natural endowments,only agricultural capital emerged as significant.This is a result that corresponds to expectations,given that foods and beverages are the primary source of demand in the tourism economy.Hence,investments in agricultural technology may foment linkages with the tourism market.It is also worth mentioning that for significant backward linkages to emerge with local agriculture,a larger scale of tourism may be important. According to the regression results,a strong tourism–agriculture nexus will not necessarily develop at a small scale of tourism demand. It appears that variables related to the entrepreneurial capital of the host economy are of notable explanatory significance.The human development index(HDI), which is used to measure a country's general level of development,is significantly and positively associated with tourism linkages.One plausible explanation for this is that international tourists,who often originate in high-income countries,may feel more comfortable and thus be inclined to consume more in a host country that has a life-style to which they can relate easily.Moreover,it is important to remember that the HDI also captures the relative achievements of countries in the level of health and education of the population.Therefore,a higher HDI reflects a healthier and more educated workforce,and thus,the quality of local entrepreneurship.Related to this point,it is important to underscore that the level of participation of women in the host economy also has a significantly positive effect on linkages.In sum, enhancing local entrepreneurial capital may expand the linkages between tourism and other sectors of the host country.
毕业论文外文翻译模板
农村社会养老保险的现状、问题与对策研究社会保障对国家安定和经济发展具有重要作用，“城乡二元经济”现象日益凸现，农村社会保障问题客观上成为社会保障体系中极为重要的部分。建立和完善农村社会保障制度关系到农村乃至整个社会的经济发展，并且对我国和谐社会的构建至关重要。我国农村社会保障制度尚不完善，因此有必要加强对农村独立社会保障制度的构建，尤其对农村养老制度的改革，建立健全我国社会保障体系。从户籍制度上看，我国居民养老问题可分为城市居民养老和农村居民养老两部分。对于城市居民我国政府已有比较充足的政策与资金投人，使他们在物质和精神方面都能得到较好地照顾，基本实现了社会化养老。而农村居民的养老问题却日益突出，成为摆在我国政府面前的一个紧迫而又棘手的问题。 一、我国农村社会养老保险的现状 关于农村养老，许多地区还没有建立农村社会养老体系，已建立的地区也存在很多缺陷，运行中出现了很多问题，所以完善农村社会养老保险体系的必要性与紧迫性日益体现出来。 （一）人口老龄化加快 随着城市化步伐的加快和农村劳动力的输出，越来越多的农村青壮年人口进入城市，年龄结构出现“两头大，中间小”的局面。中国农村进入老龄社会的步伐日渐加快。第五次人口普查显示：中国65岁以上的人中农村为5938万，占老龄总人口的67.4%.在这种严峻的现实面前，农村社会养老保险的徘徊显得极其不协调。 （二）农村社会养老保险覆盖面太小 中国拥有世界上数量最多的老年人口，且大多在农村。据统计，未纳入社会保障的农村人口还很多，截止2000年底，全国7400多万农村居民参加了保险，占全部农村居民的11.18%，占成年农村居民的11.59%.另外，据国家统计局统计，我国进城务工者已从改革开放之初的不到200万人增加到2003年的1.14亿人。而基本方案中没有体现出对留在农村的农民和进城务工的农民给予区别对待。进城务工的农民既没被纳入到农村养老保险体系中，也没被纳入到城市养老保险体系中，处于法律保护的空白地带。所以很有必要考虑这个特殊群体的养老保险问题。
英文论文及中文翻译
International Journal of Minerals, Metallurgy and Materials Volume 17, Number 4, August 2010, Page 500 DOI: 10.1007/s12613-010-0348-y Corresponding author: Zhuan Li E-mail: li_zhuan@https://www.sodocs.net/doc/5e19132786.html, ? University of Science and Technology Beijing and Springer-Verlag Berlin Heidelberg 2010 Preparation and properties of C/C-SiC brake composites fabricated by warm compacted-in situ reaction Zhuan Li, Peng Xiao, and Xiang Xiong State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China (Received: 12 August 2009; revised: 28 August 2009; accepted: 2 September 2009) Abstract: Carbon fibre reinforced carbon and silicon carbide dual matrix composites (C/C-SiC) were fabricated by the warm compacted-in situ reaction. The microstructure, mechanical properties, tribological properties, and wear mechanism of C/C-SiC composites at different brake speeds were investigated. The results indicate that the composites are composed of 58wt% C, 37wt% SiC, and 5wt% Si. The density and open porosity are 2.0 g·cm–3 and 10%, respectively. The C/C-SiC brake composites exhibit good mechanical properties. The flexural strength can reach up to 160 MPa, and the impact strength can reach 2.5 kJ·m–2. The C/C-SiC brake composites show excellent tribological performances. The friction coefficient is between 0.57 and 0.67 at the brake speeds from 8 to 24 m·s?1. The brake is stable, and the wear rate is less than 2.02×10?6 cm3·J?1. These results show that the C/C-SiC brake composites are the promising candidates for advanced brake and clutch systems. Keywords: C/C-SiC; ceramic matrix composites; tribological properties; microstructure [This work was financially supported by the National High-Tech Research and Development Program of China (No.2006AA03Z560) and the Graduate Degree Thesis Innovation Foundation of Central South University (No.2008yb019).] 温压-原位反应法制备C / C-SiC刹车复合材料的工艺和性能 李专，肖鹏，熊翔 粉末冶金国家重点实验室，中南大学，湖南长沙410083，中国（收稿日期：2009年8月12日修订：2009年8月28日;接受日期：2009年9月2日） 摘要：采用温压?原位反应法制备炭纤维增强炭和碳化硅双基体(C/C-SiC)复合材
毕业论文英文参考文献与译文
Inventory management Inventory Control On the so-called "inventory control", many people will interpret it as a "storage management", which is actually a big distortion. The traditional narrow view, mainly for warehouse inventory control of materials for inventory, data processing, storage, distribution, etc., through the implementation of anti-corrosion, temperature and humidity control means, to make the custody of the physical inventory to maintain optimum purposes. This is just a form of inventory control, or can be defined as the physical inventory control. How, then, from a broad perspective to understand inventory control? Inventory control should be related to the company's financial and operational objectives, in particular operating cash flow by optimizing the entire demand and supply chain management processes (DSCM), a reasonable set of ERP control strategy, and supported by appropriate information processing tools, tools to achieved in ensuring the timely delivery of the premise, as far as possible to reduce inventory levels, reducing inventory and obsolescence, the risk of devaluation. In this sense, the physical inventory control to achieve financial goals is just a means to control the entire inventory or just a necessary part; from the perspective of organizational functions, physical inventory control, warehouse management is mainly the responsibility of The broad inventory control is the demand and supply chain management, and the whole company's responsibility. Why until now many people's understanding of inventory control, limited physical inventory control? The following two reasons can not be ignored: First, our enterprises do not attach importance to inventory control. Especially those who benefit relatively good business, as long as there is money on the few people to consider the problem of inventory turnover. Inventory control is simply interpreted as warehouse management, unless the time to spend money, it may have been to see the inventory problem, and see the results are often very simple procurement to buy more, or did not do warehouse departments . Second, ERP misleading. Invoicing software is simple audacity to call it ERP, companies on their so-called ERP can reduce the number of inventory, inventory control, seems to rely on their small software can get. Even as SAP, BAAN ERP world, the field of
java毕业论文外文文献翻译
Advantages of Managed Code Microsoft intermediate language shares with Java byte code the idea that it is a low-level language witha simple syntax , which can be very quickly translated intonative machine code. Having this well-defined universal syntax for code has significant advantages. Platform independence First, it means that the same file containing byte code instructions can be placed on any platform; atruntime the final stage of compilation can then be easily accomplished so that the code will run on thatparticular platform. In other words, by compiling to IL we obtain platform independence for .NET, inmuch the same way as compiling to Java byte code gives Java platform independence. Performance improvement IL is actually a bit more ambitious than Java bytecode. IL is always Just-In-Time compiled (known as JIT), whereas Java byte code was ofteninterpreted. One of the disadvantages of Java was that, on execution, the process of translating from Javabyte code to native executable resulted in a loss of performance. Instead of compiling the entire application in one go (which could lead to a slow start-up time), the JITcompiler simply compiles each portion of code as it is called (just-in-time). When code has been compiled.once, the resultant native executable is stored until the application exits, so that it does not need to berecompiled the next time that portion of code is run. Microsoft argues that this process is more efficientthan compiling the entire application code at the start, because of the likelihood that large portions of anyapplication code will not actually be executed in any given run. Using the JIT compiler, such code willnever be compiled.
毕业论文(英文翻译)排版格式
英文翻译说明 1. 英文翻译文章输成word，5号新罗马（New Times Roman）字体，1.5倍行间距，将来方便打印和一起装订；英文中的图表要重新画，禁止截图。 2. 整篇论文1.5倍行间距，打印时，用B5纸，版面上空2.5cm，下空2cm，左空2.5cm，右空2cm（左装订）。 3. 论文翻译后的摘要用五号宋体，正文小四号宋体、英文和数字用新罗马（New Times Roman）12、参考文献的内容用五号字体。图和表头用五号字体加粗并居中，图和表中的内容用五号字体。论文翻译的作者用五号字体加粗。 论文大标题………小三号黑体、加黑、居中 第二层次的题序和标题………小四号黑体、加黑、居中 第三层次的题序和标题………小四号宋体、加黑、居中 正文……………………………小四号宋体、英文用新罗马12 页码……………………………小五号居中，页码两边不加修饰符 4. 论文中参考文献严格按照下述排版。 专著格式：序号.编著者.书名[M].出版地: 出版社, 年代, 起止页码 期刊论文格式：序号.作者.论文名称[J]. 期刊名称, 年度, 卷(期): 起止页码 学位论文格式：序号.作者.学位论文名称[D]. 发表地: 学位授予单位, 年度 例子: (1).胡千庭, 邹银辉, 文光才等. 瓦斯含量法预测突出危险新技术[J]. 煤炭学报, 2007.32(3): 276-280. (2). 胡千庭. 煤与瓦斯突出的力学作用机理及应用研究[D]. 北京: 中国矿业大学(北京), 2007. (3). 程伟. 煤与瓦斯突出危险性预测及防治技术[M]. 徐州: 中国矿业大学出版社, 2003.
【英文文献及翻译】中国高速铁路China High-Speed Railway
China High-Speed Railway As the economic grow, intercity travel demand has increased dramatically in the Greater China Area. Traditional railways can hardly satisfy the passenger and freight travel demand, high speed rail is hence proposed and constructed after 1990s. This study aims to integrate current development of both rail-based and Maglev high speed trains in this area. From 1997, Taiwan kicked-off its high speed rail construction by importing the technology of Japanese Shinkansen. The Taiwan High Speed Rail is a 15-billion US dollars project. To save the cost of construction and management, the BOT model was applied. Though not totally satisfied, this project is still successful and ready to operate in the 4th quarter of 2007. China is preparing its high speed rail services by upgrading current networks. The capacity and operating speed are all increased after 5-times system upgrade. The 6th upgrade will be initiated in 2006. By then, trains will run at a speed of 200km/h in a total distance of 1,400km in 7 different routes. From the white paper published by the Ministry of Railway in China, there will be totally 8 rail-based High Speed Train services. Four of them are North-South bound, and four of them are East-West bound. 5 of the 8 High Speed Rails are now under construction, the first line will be finished in 2009, and the 2nd one will be in 2010. By 2020, there will be totally 12,000 kilometers high speed rail services in China. The 250 billion US dollars construction cost still leaves some uncertainties for all these projects. Finally, the future of the Maglev system in China is not so bright as rail-based. Shanghai airport line could be the first, also the last Maglev project in China if the approved Shanghai-Hangzhou line cannot raise enough 4.4 billion dollars to build it. Steel rail composition Steel rail is composed of iron, carbon, manganese, and silicon, and contains impurities such as phosphorous, sulphur, gases, and slag. The proportions of these substances may be altered to achieve different properties, such as increased resistance to wear on curves. The standard configuration for North American rail resembles an upside down T. The three parts of T-rail are called the base, web, and head. The flat base enabled such rail to be spiked directly to wooden crossties; later, rail was placed on the now-standard steel tie plate. While the proportions and precise shape of rail are subject to constant analysis and refinement, the basic T-section has been standard since the mid-19th century. Weight
大学毕业论文---软件专业外文文献中英文翻译
软件专业毕业论文外文文献中英文翻译 Object landscapes and lifetimes Tech nically, OOP is just about abstract data typing, in herita nee, and polymorphism, but other issues can be at least as importa nt. The rema in der of this sect ion will cover these issues. One of the most importa nt factors is the way objects are created and destroyed. Where is the data for an object and how is the lifetime of the object con trolled? There are differe nt philosophies at work here. C++ takes the approach that con trol of efficie ncy is the most importa nt issue, so it gives the programmer a choice. For maximum run-time speed, the storage and lifetime can be determined while the program is being written, by placing the objects on the stack (these are sometimes called automatic or scoped variables) or in the static storage area. This places a priority on the speed of storage allocatio n and release, and con trol of these can be very valuable in some situati ons. However, you sacrifice flexibility because you must know the exact qua ntity, lifetime, and type of objects while you're writing the program. If you are trying to solve a more general problem such as computer-aided desig n, warehouse man ageme nt, or air-traffic con trol, this is too restrictive. The sec ond approach is to create objects dyn amically in a pool of memory called the heap. In this approach, you don't know un til run-time how many objects you n eed, what their lifetime is, or what their exact type is. Those are determined at the spur of the moment while the program is runnin g. If you n eed a new object, you simply make it on the heap at the point that you n eed it. Because the storage is man aged dyn amically, at run-time, the amount of time required to allocate storage on the heap is sig ni fica ntly Ion ger tha n the time to create storage on the stack. (Creat ing storage on the stack is ofte n a si ngle assembly in structio n to move the stack poin ter dow n, and ano ther to move it back up.) The dyn amic approach makes the gen erally logical assumpti on that objects tend to be complicated, so the extra overhead of finding storage and releas ing that storage will not have an importa nt impact on the creati on of an object .In additi on, the greater flexibility is esse ntial to solve the gen eral program ming problem. Java uses the sec ond approach, exclusive". Every time you want to create an object, you use the new keyword to build a dyn amic in sta nee of that object. There's ano ther issue, however, and that's the lifetime of an object. With Ian guages that allow objects to be created on the stack, the compiler determines how long the object lasts and can automatically destroy it. However, if you create it on the heap the compiler has no kno wledge of its lifetime. In a Ianguage like C++, you must determine programmatically when to destroy the
英文论文翻译
汲水门大桥有限元模型的分析 By Q. W. Zhang, T. Y. P. Chang,and C. C. Chang 摘要：本文提出的有限元模型修正的汲水门大桥的实施，是位于香港的430米主跨双层斜拉桥。通过三维有限元预测和现场振动测试，对该桥的动力特性进行了研究，。在本文中，建立的有限元模型的更新，是基于实测的动态特性。一个全面的灵敏度研究证明各种结构参数（包括连接和边界条件）的影响是在其所关注的模式进行，根据一组的结构参数，然后选择调整。有限元模型的更新在一个迭代的方式以减少之间的预测和测量频率的差异。最后更新的有限元模型，使汲水门大桥能在良好的协议与所测量的固有频率状态，并可以进行更精确的动态响应预测。 简介： 汲水门大桥（图1），位于大屿山及香港湾岛之间，是世界上最长的斜拉桥，是公路交通和铁路交通两用桥梁。为确保其结构的完整性和操作安全性，桥梁已经配备了一个相当复杂的监测系统，包括仪器参数如加速度传感器，位移传感器，液位传感器，温度传感器，应变计，风速仪（Lau and Wong 1997）。由Chang 等人通过有限元预测和现场振动测量对该桥的动力特性进行了研究（2001）。三维有限元（FE）模型，它是基于非线性弹性梁元件构建的塔和甲板上的桁架单元，电缆，和弹性或刚性连接的连接和边界约束[图1（d）]。桥面，包括钢/混凝土框架结构在大跨度和梯形箱梁的中心部分的剩余部分，是使用一个单一的脊柱通过剪切中心桥面的。由于截面的非整体性，通过一个虚拟的等效单片材料来表示复合甲板。这是通过等效的整体桥面的质量和刚度性能检核的复合甲板了。由Chang证明（1998），对截面模量的计算细节可以通过改变报告发现。电缆，另一方面，使用的是线性弹性桁架单元模拟。非线性效应由于电缆张力和下垂的电缆进行线性化，采用弹性刚度等效模量的概念考虑。有限元模型包括464个梁单元，176个桁架单元，和615个节点，总共有1536个自由度。 一般的有限元建模，给出了该桥的物理和模态特性进行详细的描述，而现场振动测试则是作为（理想化的）有限元模型评估基础信息的重要来源。有限元计算结果与现场振动试验表明在自然频率合理的相关性和桥的振型。然而，在预测
毕业论文5000字英文文献翻译
英文翻译 英语原文： . Introducing Classes The only remaining feature we need to understand before solving our bookstore problem is how to write a data structure to represent our transaction data. In C++ we define our own data structure by defining a class. The class mechanism is one of the most important features in C++. In fact, a primary focus of the design of C++ is to make it possible to define class types that behave as naturally as the built-in types themselves. The library types that we've seen already, such as istream and ostream, are all defined as classesthat is,they are not strictly speaking part of the language. Complete understanding of the class mechanism requires mastering a lot of information. Fortunately, it is possible to use a class that someone else has written without knowing how to define a class ourselves. In this section, we'll describe a simple class that we canuse in solving our bookstore problem. We'll implement this class in the subsequent chapters as we learn more about types,expressions, statements, and functionsall of which are used in defining classes. To use a class we need to know three things: What is its name? Where is it defined? What operations does it support? For our bookstore problem, we'll assume that the class is named Sales_item and that it is defined in a header named Sales_item.h. The Sales_item Class The purpose of the Sales_item class is to store an ISBN and keep track of the number of copies sold, the revenue, and average sales price for that book. How these data are stored or computed is not our concern. To use a class, we need not know anything about how it is implemented. Instead, what we need to know is what operations the class provides. As we've seen, when we use library facilities such as IO, we must include the associated headers. Similarly, for our own classes, we must make the definitions associated with the class available to the compiler. We do so in much the same way. Typically, we put the class definition into a file. Any program that wants to use our class must include that file. Conventionally, class types are stored in a file with a name that, like the name of a program source file, has two parts: a file name and a file suffix. Usually the file name is the same as the class defined in the header. The suffix usually is .h, but some programmers use .H, .hpp, or .hxx. Compilers usually aren't picky about header file names, but IDEs sometimes are. We'll assume that our class is defined in a file named Sales_item.h. Operations on Sales_item Objects