纳税筹划外文文献原文和翻译
Tax Planning
Tax planning involves conceiving of and implementing various strategies in order to minimize the amount of taxes paid for given period. For a small business, minimizing the tax liability can provide money for expenses, investment, or growth. In this way, tax planning can be a source of working capital. According to The Entrepreneur Magazine Small Business Advisor, two basic rules apply to tax planning. First, a small business should never incur additional expense only to gain a tax deduction. While purchasing necessary equipment prior to the end of tax year can be a valuable tax planning strategy, marking unnecessary purchases is not recommended. Second a small business should always attempt to defer taxes when possible. Deferring taxes enables the business to use that money interest-free, and sometimes even earn interest on it, until the next time taxes are due.
Experts recommend that entrepreneurs and small business owners conduct formal tax planning sessions in the middle of each tax year. This approach will give them time to apply their strategies to the current year as well as allow them to get a jump on the following year. It is important for small business owners to maintain a personal awareness of tax planning issues in order to save money. Even if employ a professional bookkeeper or accountant, small business owners should keep careful tabs on theirs own tax preparation in order to take advantage of all possible opportunities for deduction and tax savings.＂Whether or not you enlist the aid of an outsider, you should understand the basic provisions of the tax code.＂ Just as you would not turn over the management of your money to another person, you should not blindly allow someone else to take complete charge of your tax paying responsibilities." In addition, as Frederick W. Dailey wrote in his book Tax Savvy for Small Business, "Tax knowledge has powerful profit potential. Knowing what the tax law has to offer can give you a far better bottom line than your competitors who don't bother to learn.
General Areas of Tax Planning
There are several general areas of tax planning that apply to all sorts of small businesses. These areas include the choice of accounting and
inventory-valuation methods, the timing of equipment purchases, the spreading of business income among family members, and the selection of tax-favored benefit plans and investments. There are also some areas of tax planning that are specific to certain business forms—i.e., sole proprietorships, partnerships, C corporations, and S corporations. Some of the general tax planning strategies are described below:
ACCOUNTING METHODS. Accounting methods refer to the basic rules and guidelines under which businesses keep their financial records and prepare their financial reports. There are two main accounting methods used for record-keeping: the cash basis and the accrual basis. Small business owners must decide which method to use depending on the legal form of the business, its sales volume, whether it extends credit to customers, and the tax requirements set forth by the Internal Revenue Service (IRS). The choice of accounting method is an issue in tax planning, as it can affect the amount of taxes owed by a small business in a given year.
Accounting records prepared using the cash basis recognize income and expenses according to real-time cash flow. Income is recorded upon receipt of funds, rather than based upon when it is actually earned, and expenses are recorded as they are paid, rather than as they are actually incurred. Under this accounting method, therefore, it is possible to defer taxable income by delaying billing so that payment is not received in the current year. Likewise, it is possible to accelerate expenses by paying them as soon as the bills are received, in advance of the due date. The cash method is simpler than the accrual method, it provides a more accurate picture of cash flow, and income is not subject to taxation until the money is actually received.
In contrast, the accrual basis makes a greater effort to recognize income and expenses in the period to which they apply, regardless of whether or not money has changed hands. Under this system, revenue is recorded when it is earned, rather than when payment is received, and expenses recorded when they are incurred, rather than when payment is made. The main advantage of the accrual method is that it provides a more accurate picture
of how a business is performing over the long-term than the cash method. The main disadvantages are that it is more complex than the cash basis, and that income taxes may be owed on revenue before payment is actually received. However, the accrual basis may yield favorable tax results for companies that have few receivables and large current liabilities.
Under generally accepted accounting principles (GAAP), the accrual basis of accounting is required for all businesses that handle inventory, from small retailers to large manufacturers. It is also required for corporations and partnerships that have gross sales over $5 million per year, though there are exceptions for farming businesses and qualified personal service corporations—such as doctors, lawyers, accountants, and consultants. Other businesses generally can decide which accounting method to use based on the relative tax savings it provides.
INVENTORY VALUATION METHODS. The method a small business chooses for inventory valuation can also lead to substantial tax savings. Inventory valuation is important because businesses are required to reduce the amount they deduct for inventory purchases over the course of a year by the amount remaining in inventory at the end of the year. For example, a business that purchased $10,000 in inventory during the year but had $6,000 remaining in inventory at the end of the year could only count $4,000 as an expense for inventory purchases, even though the actual cash outlay was much larger. Valuing the remaining inventory differently could increase the amount deducted from income and thus reduce the amount of tax owed by the business.
The tax law provides two possible methods for inventory valuation: the first-in, first-out method (FIFO); and the last-in, first-out method (LIFO). As the names suggest, these inventory methods differ in the assumption they make about the way items are sold from inventory. FIFO assumes that the items purchased the earliest are the first to be removed from inventory, while LIFO assumes that the items purchased most recently are the first to be removed from inventory. In this way, FIFO values the remaining inventory at the most current cost, while LIFO values the remaining inventory at the earliest cost paid that year.
LIFO is generally the preferred inventory valuation method during times of rising costs. It places a lower value on the remaining inventory and a higher value on the cost of goods sold, thus reducing income and taxes. On the other hand, FIFO is generally preferred during periods of deflation or in industries where inventory can tend to lose its value rapidly, such as high technology. Companies are allowed to file Form 970 and switch from FIFO to LIFO at any time to take advantage of tax savings. However, they must then either wait ten years or get permission from the IRS to switch back to FIFO.
EQUIPMENT PURCHASES. Under Section 179 of the Internal Revenue Code, businesses are allowed to deduct a total of $18,000 in equipment purchases during the year in which the purchases are made. Any purchases above this amount must be depreciated over several future tax periods. It is often advantageous for small businesses to use this tax incentive to increase their deductions for business expenses, thus reducing their taxable income and their tax liability. Necessary equipment purchases up to the limit can be timed at year end and still be fully deductible for the year. This tax incentive also applies to personal property put into service for business use, with the exception of automobiles and real estate.
WAGES PAID TO FAMILY MEMBERS. Self-employed persons can also reduce their tax burden by paying wages to a spouse or to dependent children. Wages paid to children under the age of 18 are not subject to FICA (Social Security and Medicare) taxes. Under normal circumstances, employers are required to withhold 7.65 percent of the first $62,700 of an employee's income for FICA taxes. Employers are also required to match the 7.65 percent contributed by every employee, so that the total FICA contribution is 15.3 percent. Self-employed persons are required to pay both the employer and employee portions of the FICA tax.
But the FICA taxes are waived when the employee is a dependent child of the small business owner, saving the child and the parent 7.65 percent each. In addition, the child's wages are still considered a tax deductible business expense for the parent—thus reducing the parent's taxable income. Although the child must pay normal income taxes on the wages he
or she receives, it is likely to be at a lower tax rate than the parent pays. Some business owners are able to further reduce their tax burden by paying wages to their spouse. If these wages bring the business owner's net income below $62,700—the threshold for FICA taxes—then they may reduce the self-employment tax owed by business owner. It is important to note, however, that the child or spouse must actually work for the business and that the wages must be reasonable for the work performed.
BENEFITS PLANS AND INVESTMENTS. Tax planning also applies to various types of employee benefits that can provide a business with tax deductions, such as contributions to life insurance, health insurance, or retirement plans. As an added bonus, many such benefit programs are not considered taxable income for employees. Finally, tax planning applies to various types of investments that can shift tax liability to future periods, such as treasury bills, bank certificates, savings bonds, and deferred annuities. Companies can avoid paying taxes during the current period for income that is reinvested in such tax-deferred instruments.
Tax Planning for Different Business Forms
"The first step in tax planning—for small business owners and professionals, at least—is to select the right form of organization for your enterprise," according to Albert B. Ellentuck in the Laventhol and Horwath Small Business TaxPlanning Guide. "You'll end up paying radically different amounts of income tax depending on the form you select. And your odds of being audited by the IRS will change, too." Many aspects of tax planning are specific to certain business forms; some of these are discussed below:
SOLE PROPRIETORSHIPS AND PARTNERSHIPS. Tax planning for sole proprietorships and partnerships is in many ways similar to tax planning for individuals. This is because the owners of businesses organized as sole proprietors and partnerships pay personal income tax rather than business income tax. These small business owners file an informational return for their business with the IRS, and then report any income taken from the business for personal use on their own personal tax return. No special taxes are imposed except for the self-employment tax (SECA), which
requires all self-employed persons to pay both the employer and employee portions of the FICA tax, for a total of 15.3 percent.
Since they do not receive an ordinary salary, the owners of sole proprietorships and partnerships are not required to withhold income taxes for themselves. Instead, they are required to estimate their total tax liability and remit it to the IRS in quarterly installments, using Form 1040 ES. It is important that the amount of tax paid in quarterly installments equal either the total amount owed during the previous year or 90 percent of their total current tax liability. Otherwise, the IRS may charge interest and impose a stiff penalty for underpayment of estimated taxes.
Since the IRS calculates the amount owed quarterly, a large lump-sum payment in the fourth quarter will not enable a taxpayer to escape penalties. On the other hand, a significant increase in withholding in the fourth quarter may help, because tax that is withheld by an employer is considered to be paid evenly throughout the year no matter when it was withheld. This leads to a possible tax planning strategy for a self-employed person who falls behind in his or her estimated tax payments. By having an employed spouse increase his or her withholding, the self-employed person can make up for the deficiency and avoid a penalty. The IRS has also been known to waive underpayment penalties for people in special circumstances. For example, they might waive the penalty for newly self-employed taxpayers who underpay their income taxes because they are making estimated tax payments for the first time.
Another possible tax planning strategy applies to partnerships that anticipate a loss. At the end of each tax year, partnerships file the informational Form 1065 (Partnership Statement of Income) with the IRS, and then report the amount of income that accrued to each partner on Schedule K1. This income can be divided in any number of ways, depending on the nature of the partnership agreement. In this way, it is possible to pass all of a partnership's early losses to one partner in order to maximize his or her tax advantages.
What’s more, enterprises to carry out the correct tax, the need for the adoption of the following major route of transmission.
First, reasonable means of financing options. In accordance with the provisions of China's current tax law, corporate interest payments on the loan within a certain range can be pre-tax expenses, and dividends can only be spending the after-tax profits of enterprise expenses. From a tax point of view, appropriate to the bank business loans and financing between enterprises, rather than directly to the fund-raising benefits.
Second, a reasonable choice of trading partners. China's existing value-added tax system has a general taxpayers and small-scale taxpayers on the points, choose a different supplier object, the tax burden on enterprises is not the same. For example, when the Department of suppliers of value-added tax general taxpayer, the business after the purchase of goods, according to the amount of tax deduction of input tax amount of the corresponding balance after payment of value-added tax; if the purchase of goods for small-scale taxpayers, VAT can not be achieved Its not contain the amount of input tax deduction, the tax burden more than the former. Such as open invoices can also be part of deduction.
Third, "the easy way out" tax conversion. Enterprises will be converted to high-tax low-tax, refers to economic activities in the same, there are a variety of revenue options to choose from, the taxpayers to avoid "high-tax point", choose the "low tax" and reduce the tax liability . The most typical example of this is to run non-taxable to the tax planning services. From the tax point of view, run mainly two: First, the same taxes, different tax rates. Systems such as supply and marketing enterprises, the general operating tax rate is 17% of the means of subsistence, but also the operating value-added tax rate of 13% of the agricultural means of production and so on. Second, different taxes, different tax rates. This usually refers to types of enterprises in their business activities, both value-added business project, the project also involves the business tax.
Fourth, the cost of reasonable expenses. Enterprises does not violate tax laws and financial system under the premise of the full cost of the
reasonable expenses, that may occur on the full estimated losses and narrow the tax base and reduce the amount of taxable income. Countries allow for costs incurred in the projects, such as wages, respectively, the total amount of tax by 2%, 14%, 1.5% extracts of trade union funds, staff welfare, staff education funding should be sufficient to mention as much as possible to the whole. For some of the losses that may occur, such as bad debt losses, businesses should be fully expected in the tax law as far as possible the extent permitted by the cap enough to reserve. This is in line with the national tax law and financial system, can receive the tax effect.
Fifth, to reduce tax liability. Factors that affect the tax liability there are two, namely, tax base and tax rates, the smaller the tax base, lower tax rates, tax liability is also smaller. Tax planning can start from these two factors to find legitimate ways to reduce tax liability. For example, an enterprise December 30, 2005 estimated taxable income amounted to 100,200 yuan, the enterprise income tax liability 25050 yuan (100200 ×25%). If the corporate tax planning, tax consulting fe es to pay 200 yuan, the corporate taxable income 100,000 (100200-200), income tax liability 27,000 yuan (100000 × 27%), can be found by comparing, for tax planning to pay only 200 yuan, 6066 yuan tax is (33066-27000).
Sixth, to weigh the severity of the overall tax burden. For example, many value-added tax planning programs have the general taxpayer and the taxpayer to choose small-scale planning. If an enterprise is a non-tax-year sales of about 900,000 yuan of production enterprises and enterprises to buy the materials each year the price of non-value-added tax of 70 million or less. The company's accounting system, the conditions identified as the general taxpayers. If that is the general taxpayer, the company's products are value-added tax rate applies to 17% capital gains tax liability 34,000 yuan (90 × 17% -70 × 17%); If it is small-scale taxpayers, the rate is 6%, 5.4 VAT liability million (90 × 6%)> 3.4 million. Therefore, from the perspective of value-added tax general taxpayer should be selected. But, in fact, although small-scale VAT taxpayers pay 20,000 yuan, but the input tax amount of 119,000 yuan (70 × 17%), although it can not offset the costs, thereby increasing the cost
of 119,000 yuan, the income tax reduction of 2.975 million (11.9 × 25%), than pay a 20,000 yuan of value-added tax. Therefore, the business tax planning in the selection of programs, not only to look in a certain period of time watching the program on tax less, and to consider business development goals, to choose to increase their overall revenue program.
Seventh, take full advantage of preferential taxation policies. For taxpayers, the use of tax incentives for tax planning focuses on how the rational use of tax policies and regulations shall apply to the lower or more favorable tax rates, a well-planned production and operation activities, the actual tax burden to a minimum in order to achieve Festival tax effect. For example, according to China's Law of the State Council for approval of high-tech industrial development zone of the high-tech enterprises, since the production from the fiscal year income tax exemption for 2 years. To-business use of wastewater, waste gas, waste residue and other waste as the main raw materials for production, 5 years in the income tax reduction or exemption. In addition, to support agriculture and the development of UNESCO Wei investment, countries have different tax incentives. Business operators should refer to policy, comparing the investment environment, investment income, investment risks and other factors, decided to invest in the region, investment direction, as well as investment projects, a reasonable tax planning, in order to reduce the corporate tax burden.
It should be noted that the above-mentioned methods taxpayers use tax, on the one hand, it is necessary to comply with the characteristics of enterprise production and management, overall planning, comprehensive consideration and can not cater for all kinds; On the other hand, to keep learning and understanding of national trends and policies on tax reform measures amendments and adjustments, accurately grasp the limits of tax regulations and policies, in-depth study of the relevant provisions of tax laws to prevent tax and give rise to other problems.
税收筹划
税收筹划涉及的设想和实施各种策略的目的是尽量减少对一定时期内支付的税款。对于一个企业，尽量减少税务负担可以提供更多的钱费用于支付费用和用于投资。通过这种方式，税收筹划工作可以筹集更多资金来源。根据小企业的企业家杂志顾问，两个基本规则适用于税务规划。首先，小企业不应该承担的额外开支只获得税收减免。在纳税年度结束时购买必要的设备可以成为有价值纳税筹划方法，使不必要的采购不建议。第二，小企业要始终企图尽可能推迟纳税。推迟纳税使该公司能够利用这些钱免息，有时甚至是赚取利息税，直到下一次到期。
专家建议企业家和小企业主在每一个纳税年度的年中进行正式的税收筹划会议。这会给他们制定纳税计划提供足够的时间。这种意识对于小企业家说来很重要，因为这可以节约税收支出。即使企业中有专业会计人员，中小企业主也应该细心关注税务筹划工作，不错过能够节税的每一个机会。“不论是你否任用一个企业外部人员来帮助你进行节税工作，你都应该了解税法的基本规定”艾伯特说，“就像你不会将自己的钱交给别人管理一样，你也不应盲目让别人去完成管理你的纳税的责任”。弗雷德里克在他的书中写到：“税收知识拥有强大的盈利的可能性。知道税法规定可以在竞争中给你提供更好的底线。”
一般领域的纳税筹划
有几个一般税收筹划方法,适用于各种小型企业。包括选择会计方法和存货计价方法，采购设备的支付时间，选择有利有纳税的投资方案。这些一般领域税务规划策略如下所述
会计处理方法。有两个会计方法用于记录：收付实现制和权责发生制。选择不同的记录方法会对企业的纳税筹划有不同的影响。
使用收付实现制记录会计事项时，收入被记录是在收到现金时而不是在业务发生时。费用的记录也是在支付时而不是在发生时。在这种会计方法,就可能延缓其应纳税所得额的付款方式,一般是用拖延当年没有收到的收入和支付以后返销的费用的方法。收付实现制的记录比权责发生制简单，它可以提供一个精确的现金流，而且收入不会在现金收到以前被记录。
相反，以权责发生制为基础的记录会非常明确的区分收入和费用发生的期间，不管现金有没有收到或支付。在这种记录方式下，收入在业务发生时会被记录，而不是在现金收到时记录。同样费用也会在发生时被记录而不是在支付时记录。这种方法的优点是能提供比收付实现制更为精确的长期现金流。缺点是它比收付实现制复杂，而且会比收付实现制提前支付收入的应交所得税。然而，权责发生制条件下，拥有少量应收账款和大量流动负债的企业会支付较少的企业所得税。
公认的会计准则认为，所有库存商品的处理都应该使用权责发生制。除了农业企业和类似医生、律师这样的人才服务，销售量500万美元以上的企业也要求使用权责发生制。其它情况企业可以决定使用哪些会计记录方法以实现合理减税的目的。
存货计价方法。选择存货计价方法对纳税筹划也很重要。例如一项业务购买了10000美元存货，年底有6000美元的库存，到年底可以只算4000美元为存货开支，即使实际支付10000美元比4000美元多。重视库存的扣除额能够降低所欠的税额。
税法提供两种存货计价方法：先进先出法和后进先出法。顾名思议，先进先出法是最早购买的一批货被第一批移出仓库，而后进先出法是最晚购买的一批货被第一批移出仓库。先进先出法的存货成本是最近购买的存货的成本，后进先出法的存货成本是最先购买的存货的成本。
物价上涨的时候采用后进先出法是比较好的存货计价方法。它分配给库存商品较低的价值，分配给已发出存货较高的价值。这样可以减少利润以降低税收。通货紧缩的情况下采用先进先出法比较有利于避税。企业可以选择存货计价方法以实现合理避税的目的。
设备采购。税法第179条规定，企业可以扣除18000症状元在当年购买的设备的价款。这些钱需要在以后的年度进行摊销。这个规定有利于中小企业利用税收扣除来减少他们的税务负担和应纳所得税额。
家庭成员的工资。雇佣自己的家庭成员当员工也可以通过支付给他们工资的方式减少纳税额。18岁以下儿童不受社会保障制度和医疗保障，可以免去部分税收。
福利计划和投资。税收筹划也适用于各种类型的员工福利,可以提供了一定的商业减税,如贡献与人寿保险、医疗保险、或退休计划。作为额外的奖励,许多这样的福利不考虑员工应纳税所得额。最后,税收筹划适用于各种类型的投资,税务责任可以转移未来期间,如国库券、银行证书,储蓄债券,以及递延养老金。公司可以避免纳税把纳税义务推迟到以后的纳税期间。
不同商务形式的纳税筹划。
“第一个纳税筹划的步骤是选择合适的公司组织形式，”艾伯特认为，“选择不同的组织形式会交纳不同的所得税。”税收筹划的许多方面针对某些行业形式、讨论其中的一些如下:
独资和合伙企业。独资和合伙企业的税收筹划在很多方面都类似于个人的税收筹划。这是因为业主企业投资人和组织的合作伙伴关系,他们缴纳的是个人所得税而不是企业所得税。没有特别的税收是除了对自谋职业税收,也就是要求所有的自雇人员支付雇主和雇员都FICA的部分税收,总共15.3%。
因为中小企业主收到的工资不是普通的工资水平，业主的独资和合伙企业不需要保留所得税。他们被要求估计自己的应纳税额并用季度分期付款的方式汇给税务局。否则,国内税务局可能会收取较高利息的,并处惩罚失业估计税。美国国税局计算欠税方法，第四季度的一个大额一次性付税不能使纳税人逃脱惩罚。
另一个可行的税务筹划策略是建立组织伙伴关系，估计预期损失。这样，就可以通过所有的合作早期的损失的确定最大限度的提高自己的合作伙伴的税收。
另外，企业要正确地进行节税，需要通过以下的主要途径。
一、选择合理的筹资方式。根据我国现行税法规定，企业的借款利息支出在一定范围内可以税前列支，而股息支出则只能在企业的税后利润中列支。从节税的角度看，企业适度向银行借款和企业间的相互融资，要比企业直接向社会筹资优惠。
二、选择合理的交易对象。我国现行增值税制度规定有一般纳税人和小规模纳税人之分，选择不同的供货对象，企业所负担的税负则不相同。例如，当供货方系增值税一般纳税人时，企业购进货物后，可按销项税额抵扣相应的进项税额后的余额缴纳增值税；如果购买小规模纳税人的货物，不能取得增值税专用发票的，其含有进项税额不能抵扣，税负比前者要多。如开专用发票也可抵扣一部分。
三、“避重就轻”转换纳税义务。企业将高纳税义务转换为低纳税义务，是指在同一经济行为中，有多种税收方案可供选择时，纳税人避开“高税点”，选择“低税点”，可减轻纳税义务。最典型的例子就是对兼营非应税劳务进行的节税筹划。从税收角度来看，兼营主要包括两种：一是税种相同，税率不同。例如供销系统企业，一般既经营增值税率为17%的生活资料，又经营增值税率为13%的农用生产资料等。二是不同税种，不同税率。该种类型通常是指企业在其经营活动中，既经营增值税项目，又涉及营业税项目。
四、合理列支各项费用。企业可以在不违反税法和财务制度的前提下，通过对各项费用充分合理的列支，对各项可能发生的损失进行充分估计，缩小税基，减少应纳税所得额。对于国家允许在费用中列支的项目，如分别按计税工资总额的2%、14%、1.5%提取的职工工会经费、职工福利费、职工教育经费，应尽可能地提足提全。对于一些可能发生的损失，如坏账损失等，企业应充分预计，在税法允许的范围内尽可能按上限提足准备金。这既符合国家税法和财务制度的规定，又能收到节税的效果。
五、降低应纳税额。影响应纳税额的因素有两个，即计税基数和税率，计税基数越小，税率越低，应纳税额也越小。进行税务筹划可从这两个因素入手，找到合法的办法来降低应纳税额。例如，某企业2005年12月30日测算的应纳税所得额为10.02万元，则企业应纳所得税25050元（100200×25%）。如果该企业进行了税务筹划，支付税务咨询费200元，则该企业应纳税所得额100000元
（100200-200），应纳所得税27000元（100000×27%），通过比较可以发现，进行税务筹划支付费用仅为200元，却节税6066元（33066-27000）。
六、权衡整体税负的轻重。例如，很多筹划方案中都有增值税一般纳税人与小规模纳税人选择的筹划。如某企业是一个年不含税销售额90万元左右的生产企业，企业每年购进的材料不含增值税的价格大致在70万元左右。该公司会计核算体系健全，有条件认定为一般纳税人。如果是一般纳税人，公司产品的增值税适用税率是17%，应纳增值税3.4万元（90×17%-70×17%）；如果是小规模纳税人，税率为6%，应纳增值税5.4万元（90×6%）＞3.4万元。因此，仅从增值税角度考虑应选择一般纳税人。但实际上，虽然小规模纳税人多纳增值税2万元，但其进项税额11.9万元（70×17%），虽然不能抵扣却可以计入成本，从而增加成本11.9万元，所得税减少2.975万元（11.9×25%），大于多纳的增值税2万元。因此，企业在选择税务筹划方案时，不能仅把目光盯在某一时期纳税较少的方案上，而要考虑企业的发展目标，选择有利于增加企业整体收益的方案。
七、充分利用税收优惠政策。对于纳税人来讲，利用税收优惠政策进行纳税筹划的重点在于如何合理运用税收政策法规的规定，适用较低或较优惠的税率，妥善规划生产经营活动，使其实际税负最低，以达到节税的效果。例如，根据我国税法规定，对国务院批准的高新技术产业开发区内的高新技术企业，自投产年度起免征所得税2年。对企业利用废水、废气、废渣等废弃物为主要原料进行生产的，可在5年内减征或免征所得税。此外，对用于支持农业以及教科卫事业发展的投资，国家也有不同的税收优惠政策。企业经营者应参照政策规定，综合比较投资环境、投资收益、投资风险等因素，决定投资区域、投资方向以及投资项目，合理进行税务筹划，以减少企业税负。
需要说明的是，纳税人运用上述方法进行节税，一方面，要符合企业生产经营特点，统筹规划，综合考虑，不能顾此失彼；另一方面，要经常学习，了解国家税制改革动向及优惠政策措施的修订和调整，准确把握税收法规政策界限，深入研究税法的相关规定，防止因节税而引发其他问题。
1外文文献翻译原文及译文汇总
华北电力大学科技学院 毕业设计（论文）附件 外文文献翻译 学号：121912020115姓名：彭钰钊 所在系别：动力工程系专业班级：测控技术与仪器12K1指导教师：李冰 原文标题：Infrared Remote Control System Abstract 2016 年 4 月 19 日
红外遥控系统 摘要 红外数据通信技术是目前在世界范围内被广泛使用的一种无线连接技术，被众多的硬件和软件平台所支持。红外收发器产品具有成本低，小型化，传输速率快，点对点安全传输，不受电磁干扰等特点，可以实现信息在不同产品之间快速、方便、安全地交换与传送，在短距离无线传输方面拥有十分明显的优势。红外遥控收发系统的设计在具有很高的实用价值，目前红外收发器产品在可携式产品中的应用潜力很大。全世界约有1亿5千万台设备采用红外技术，在电子产品和工业设备、医疗设备等领域广泛使用。绝大多数笔记本电脑和手机都配置红外收发器接口。随着红外数据传输技术更加成熟、成本下降，红外收发器在短距离通讯领域必将得到更广泛的应用。 本系统的设计目的是用红外线作为传输媒质来传输用户的操作信息并由接收电路解调出原始信号，主要用到编码芯片和解码芯片对信号进行调制与解调，其中编码芯片用的是台湾生产的PT2262，解码芯片是PT2272。主要工作原理是：利用编码键盘可以为PT2262提供的输入信息，PT2262对输入的信息进行编码并加载到38KHZ的载波上并调制红外发射二极管并辐射到空间，然后再由接收系统接收到发射的信号并解调出原始信息，由PT2272对原信号进行解码以驱动相应的电路完成用户的操作要求。 关键字：红外线；编码；解码；LM386；红外收发器。 1 绪论
人力资源管理外文文献翻译
文献信息： 文献标题：Challenges and opportunities affecting the future of human resource management（影响人力资源管理未来的挑战和机遇） 国外作者：Dianna L. Stone，Diana L. Deadrick 文献出处：《Human Resource Management Review》, 2015, 25(2):139-145 字数统计：英文3725单词，21193字符；中文6933汉字 外文文献： Challenges and opportunities affecting the future of human resource management Abstract Today, the field of Human Resource Management (HR) is experiencing numerous pressures for change. Shifts in the economy, globalization, domestic diversity, and technology have created new demands for organizations, and propelled the field in some completely new directions. However, we believe that these challenges also create numerous opportunities for HR and organizations as a whole. Thus, the primary purposes of this article are to examine some of the challenges and opportunities that should influence the future of HR. We also consider implications for future research and practice in the field. Keywords: Future of human resource management, Globalization, Knowledge economy Diversity, Technology 1.Change from a manufacturing to a service or knowledge economy One of the major challenges influencing the future of HR processes is the change from a manufacturing to a service or knowledgebased economy. This new economy is characterized by a decline in manufacturing and a growth in service or knowledge as the core of the economic base. A service economy can be defined as a system based on buying and selling of services or providing something for others (Oxford
土木工程外文文献及翻译
本科毕业设计 外文文献及译文 文献、资料题目：Designing Against Fire Of Building 文献、资料来源：国道数据库 文献、资料发表（出版）日期：2008.3.25 院（部）：土木工程学院 专业：土木工程 班级：土木辅修091 姓名：武建伟 学号：2008121008 指导教师：周学军、李相云 翻译日期： 20012.6.1
外文文献: Designing Against Fire Of Buliding John Lynch ABSTRACT: This paper considers the design of buildings for fire safety. It is found that fire and the associ- ated effects on buildings is significantly different to other forms of loading such as gravity live loads, wind and earthquakes and their respective effects on the building structure. Fire events are derived from the human activities within buildings or from the malfunction of mechanical and electrical equipment provided within buildings to achieve a serviceable environment. It is therefore possible to directly influence the rate of fire starts within buildings by changing human behaviour, improved maintenance and improved design of mechanical and electrical systems. Furthermore, should a fire develops, it is possible to directly influence the resulting fire severity by the incorporation of fire safety systems such as sprinklers and to provide measures within the building to enable safer egress from the building. The ability to influence the rate of fire starts and the resulting fire severity is unique to the consideration of fire within buildings since other loads such as wind and earthquakes are directly a function of nature. The possible approaches for designing a building for fire safety are presented using an example of a multi-storey building constructed over a railway line. The design of both the transfer structure supporting the building over the railway and the levels above the transfer structure are considered in the context of current regulatory requirements. The principles and assumptions associ- ated with various approaches are discussed. 1 INTRODUCTION Other papers presented in this series consider the design of buildings for gravity loads, wind and earthquakes.The design of buildings against such load effects is to a large extent covered by engineering based standards referenced by the building regulations. This is not the case, to nearly the same extent, in the
外文文献及翻译
文献翻译 原文 Combining JSP and Servlets The technology of JSP and Servlet is the most important technology which use Java technology to exploit request of server, and it is also the standard which exploit business application .Java developers prefer to use it for a variety of reasons, one of which is already familiar with the Java language for the development of this technology are easy to learn Java to the other is "a preparation, run everywhere" to bring the concept of Web applications, To achieve a "one-prepared everywhere realized." And more importantly, if followed some of the principles of good design, it can be said of separating and content to create high-quality, reusable, easy to maintain and modify the application. For example, if the document in HTML embedded Java code too much (script), will lead the developed application is extremely complex, difficult to read, it is not easy reuse, but also for future maintenance and modification will also cause difficulties. In fact, CSDN the JSP / Servlet forum, can often see some questions, the code is very long, can logic is not very clear, a large number of HTML and Java code mixed together. This is the random development of the defects. Early dynamic pages mainly CGI (Common Gateway Interface, public Gateway Interface) technology, you can use different languages of the CGI programs, such as VB, C / C + + or Delphi, and so on. Though the technology of CGI is developed and powerful, because of difficulties in programming, and low efficiency, modify complex shortcomings, it is gradually being replaced by the trend. Of all the new technology, JSP / Servlet with more efficient and easy to program, more powerful, more secure and has a good portability, they have been many people believe that the future is the most dynamic site of the future development of technology. Similar to CGI, Servlet support request / response model. When a customer submit a request to the server, the server presented the request Servlet, Servlet responsible for handling requests and generate a response, and then gave the server, and then from the server sent to
客户关系管理外文文献翻译(2017)
XXX学院 毕业设计(论文)外文资料翻译 学院：计算机与软件工程学院 专业：计算机科学技术(软件工程方向) 姓名： 学号： 外文出处：GoyKakus.THE RESEARCH OFCUSTOMER RELATIONSHIP MANAGEMENT STRATEGY [J]. International Journal of Management Research & Review, 2017, 1(9): 624-635. 附件： 1.外文资料翻译译文；2.外文原文。 注：请将该封面与附件装订成册。
附件1：外文资料翻译译文 客户关系管理战略研究 Goy Kakus 摘要 客户关系管理解决方案，通过为你提供客户业务数据来帮助你提供客户想要的服务或产品,提供更好的客户服务、交叉销售和更有效的销售,达成交易,保留现有客户并更好地理解你的客户是谁。本文探讨了客户关系管理模型在获得、保持与发展策略方面的优势。然而,我们对其定义和意义还存在一些困惑。本文通过考察关系营销和其他学科方面的相关文献，解释了客户关系管理的概念基础,从而对客户关系管理的知识作出了贡献。 关键词:客户关系管理模型, 客户关系管理的博弈改变者与关键策略 引言 CRM 是客户关系管理的简称。它的特征在于公司与客户的沟通,无论是销售还是服务相关的。客户关系管理这一术语经常用来解释企业客户关系,客户关系管理系统也以同样的方式被用来处理商业联系, 赢得客户,达成合同和赢得销售。 客户关系管理通常被考虑作为一个业务策略，从而使企业能够: *了解客户 *通过更好的客户体验留住客户 *吸引新客户 *赢得新客户和达成合同 *提高盈利 *减少客户管理成本 *通过服务台等工具软件,电子邮件组织者和不同类型的企业应用程序，企业业务经常寻求个性化的在线体验。 设计精良的客户关系管理包括以下特征: 1．客户关系管理是一种以顾客为中心并以客户投入为基础的服务响应，一对一的解决客户的必需品, 买家和卖家服务中心直接在线互动,帮助客户解决他
文献翻译英文原文
https://www.sodocs.net/doc/d13671481.html,/finance/company/consumer.html Consumer finance company The consumer finance division of the SG group of France has become highly active within India. They plan to offer finance for vehicles and two-wheelers to consumers, aiming to provide close to Rs. 400 billion in India in the next few years of its operations. The SG group is also dealing in stock broking, asset management, investment banking, private banking, information technology and business processing. SG group has ventured into the rapidly growing consumer credit market in India, and have plans to construct a headquarters at Kolkata. The AIG Group has been approved by the RBI to set up a non-banking finance company (NBFC). AIG seeks to introduce its consumer finance and asset management businesses in India. AIG Capital India plans to emphasize credit cards, mortgage financing, consumer durable financing and personal loans. Leading Indian and international concerns like the HSBC, Deutsche Bank, Goldman Sachs, Barclays and HDFC Bank are also waiting to be approved by the Reserve Bank of India to initiate similar operations. AIG is presently involved in insurance and financial services in more than one hundred countries. The affiliates of the AIG Group also provide retirement and asset management services all over the world. Many international companies have been looking at NBFC business because of the growing consumer finance market. Unlike foreign banks, there are no strictures on branch openings for the NBFCs. GE Consumer Finance is a section of General Electric. It is responsible for looking after the retail finance operations. GE Consumer Finance also governs the GE Capital Asia. Outside the United States, GE Consumer Finance performs its operations under the GE Money brand. GE Consumer Finance currently offers financial services in more than fifty countries. The company deals in credit cards, personal finance, mortgages and automobile solutions. It has a client base of more than 118 million customers throughout the world
土木工程外文文献翻译
专业资料 学院： 专业：土木工程 姓名： 学号： 外文出处：Structural Systems to resist (用外文写) Lateral loads 附件：1.外文资料翻译译文；2.外文原文。
附件1：外文资料翻译译文 抗侧向荷载的结构体系 常用的结构体系 若已测出荷载量达数千万磅重，那么在高层建筑设计中就没有多少可以进行极其复杂的构思余地了。确实，较好的高层建筑普遍具有构思简单、表现明晰的特点。 这并不是说没有进行宏观构思的余地。实际上，正是因为有了这种宏观的构思，新奇的高层建筑体系才得以发展，可能更重要的是：几年以前才出现的一些新概念在今天的技术中已经变得平常了。 如果忽略一些与建筑材料密切相关的概念不谈，高层建筑里最为常用的结构体系便可分为如下几类： 1.抗弯矩框架。 2.支撑框架，包括偏心支撑框架。 3.剪力墙，包括钢板剪力墙。 4.筒中框架。 5.筒中筒结构。 6.核心交互结构。 7. 框格体系或束筒体系。 特别是由于最近趋向于更复杂的建筑形式，同时也需要增加刚度以抵抗几力和地震力，大多数高层建筑都具有由框架、支撑构架、剪力墙和相关体系相结合而构成的体系。而且，就较高的建筑物而言，大多数都是由交互式构件组成三维陈列。 将这些构件结合起来的方法正是高层建筑设计方法的本质。其结合方式需要在考虑环境、功能和费用后再发展，以便提供促使建筑发展达到新高度的有效结构。这并
不是说富于想象力的结构设计就能够创造出伟大建筑。正相反，有许多例优美的建筑仅得到结构工程师适当的支持就被创造出来了，然而，如果没有天赋甚厚的建筑师的创造力的指导，那么，得以发展的就只能是好的结构，并非是伟大的建筑。无论如何，要想创造出高层建筑真正非凡的设计，两者都需要最好的。 虽然在文献中通常可以见到有关这七种体系的全面性讨论，但是在这里还值得进一步讨论。设计方法的本质贯穿于整个讨论。设计方法的本质贯穿于整个讨论中。 抗弯矩框架 抗弯矩框架也许是低，中高度的建筑中常用的体系，它具有线性水平构件和垂直构件在接头处基本刚接之特点。这种框架用作独立的体系，或者和其他体系结合起来使用，以便提供所需要水平荷载抵抗力。对于较高的高层建筑，可能会发现该本系不宜作为独立体系，这是因为在侧向力的作用下难以调动足够的刚度。 我们可以利用STRESS，STRUDL 或者其他大量合适的计算机程序进行结构分析。所谓的门架法分析或悬臂法分析在当今的技术中无一席之地，由于柱梁节点固有柔性，并且由于初步设计应该力求突出体系的弱点，所以在初析中使用框架的中心距尺寸设计是司空惯的。当然，在设计的后期阶段，实际地评价结点的变形很有必要。 支撑框架 支撑框架实际上刚度比抗弯矩框架强，在高层建筑中也得到更广泛的应用。这种体系以其结点处铰接或则接的线性水平构件、垂直构件和斜撑构件而具特色，它通常与其他体系共同用于较高的建筑，并且作为一种独立的体系用在低、中高度的建筑中。
第三方物流外文文献(原文与翻译)
我国第三方物流中存在的问题、原因及战略选择 熊卫 【摘要】我国物流业发展刚刚起步，第三方物流的理论和实践等方面都比较薄弱。本文指出我国第三方物流存在的问题在于国内外第三方物流企业差距、物流效率不高、缺乏系统性管理、物流平台构筑滞后、物流管理观念落后等。分析了产生上述问题的原因，并提出了精益物流、中小型第三方物流企业价值链联盟、大型第三方物流企业虚拟化战略等三种可供选择的第三方物流企业发展战略。 【关键词】第三方物流；精益物流战略；价值链联盟；虚拟化战略 1引言 长期以来，我国国内企业对采购、运输、仓储、代理、包装、加工、配送等环节控制能力不强，在“采购黑洞”、“物流陷井”中造成的损失浪费难以计算。因此，对第三方物流的研究，对于促进我国经济整体效益的提高有着非常重要的理论和实践意义。本文试图对我国策三方物流存在的问题及原因进行分析探讨，并提出第三方物流几种可行的战略选择。 2我国第三方物流业存在的主要问题 (一)我国策三方物流企业与国外第三方物流企业的差距较大，具体表现在以下几个方面： 1、规模经济及资本差距明显。由于国外的大型第三方物流企业从全球经营的战略出发，其规模和资本优势是毫无疑问的，尤其初创时期的我国策三方物流业，本身的规模就很小，国外巨头雄厚的资本令国内企业相形见绌。 2、我国策三方物流业企业提供的物流服务水准及质量控制远不如国外同行。当国内一些企业还在把物流理解成“卡车加仓库“的时候，国外的物流企业早已完成了一系列标准化的改造。同时，国外的物流组织能力非常强大，例如德国一家第三方物流公司，公司各方面的物流专家遍布欧洲各地。如果有客户的货物需要经达不同的国家，那么欧洲各地的这些专家就在网上设计出一个最佳的物流解决方案。这种提供解决方案的能力就是这第三方物流公司的核心能力，而不像国内公司号称拥有多少条船，多少辆车。 3、我国加入WTO后物流产业的门槛降低。在物流服务业方面：我国承诺所有的服务行业，在经过合理过渡期后，取消大部分外国股权限制，不限制外国服务供应商进入
工商管理专业外文文献翻译
Project Budget Monitor and Control Author：Yin Guo-li Nationality：American Derivation：Management Science and Engineering.Montreal: Mar 20, 2010 . With the marketing competitiveness growing, it is more and more critical in budget control of each project. This paper discusses that in the construction phase, how can a project manager be successful in budget control. There are many methods discussed in this paper, it reveals that to be successful, the project manager must concern all this methods. 1. INTRODUCTION The survey shows that most projects encounter cost over-runs (Williams Ackermann, Eden, 2002,pl92). According to Wright (1997)'s research, a good rule of thumb is to add a minimum of 50% to the first estimate of the budget (Gardiner and Stewart, 1998, p251). It indicates that project is very complex and full of challenge. Many unexpected issues will lead the project cost over-runs. Therefore, many technologies and methods are developed for successful monitoring and control to lead the project to success. In this article, we will discuss in the construction phase, how can a project manager to be successful budget control. 2. THE CONCEPT AND THE PURPOSE OF PROJECT CONTROL AND MONITOR Erel and Raz (2000) state that the project control cycle consists of measuring the status of the project, comparing to the plan, analysis of the deviations, and implementing any appropriate corrective actions. When a project reach the construction phase, monitor and control is critical to deliver the project success. Project monitoring exists to establish the need to take corrective action, whilst there is still time to take action. Through monitoring the activities, the project team can analyze the deviations and decide what to do and actually do it. The purpose of monitor and control is to support the implementation of corrective actions, ensure projects stay on target or get project back on target once it has gone off target。
土木工程类专业英文文献及翻译
PA VEMENT PROBLEMS CAUSED BY COLLAPSIBLE SUBGRADES By Sandra L. Houston,1 Associate Member, ASCE (Reviewed by the Highway Division) ABSTRACT: Problem subgrade materials consisting of collapsible soils are com- mon in arid environments, which have climatic conditions and depositional and weathering processes favorable to their formation. Included herein is a discussion of predictive techniques that use commonly available laboratory equipment and testing methods for obtaining reliable estimates of the volume change for these problem soils. A method for predicting relevant stresses and corresponding collapse strains for typical pavement subgrades is presented. Relatively simple methods of evaluating potential volume change, based on results of familiar laboratory tests, are used. INTRODUCTION When a soil is given free access to water, it may decrease in volume, increase in volume, or do nothing. A soil that increases in volume is called a swelling or expansive soil, and a soil that decreases in volume is called a collapsible soil. The amount of volume change that occurs depends on the soil type and structure, the initial soil density, the imposed stress state, and the degree and extent of wetting. Subgrade materials comprised of soils that change volume upon wetting have caused distress to highways since the be- ginning of the professional practice and have cost many millions of dollars in roadway repairs. The prediction of the volume changes that may occur in the field is the first step in making an economic decision for dealing with these problem subgrade materials. Each project will have different design considerations, economic con- straints, and risk factors that will have to be taken into account. However, with a reliable method for making volume change predictions, the best design relative to the subgrade soils becomes a matter of economic comparison, and a much more rational design approach may be made. For example, typical techniques for dealing with expansive clays include: (1) In situ treatments with substances such as lime, cement, or fly-ash; (2) seepage barriers and/ or drainage systems; or (3) a computing of the serviceability loss and a mod- ification of the design to "accept" the anticipated expansion. In order to make the most economical decision, the amount of volume change (especially non- uniform volume change) must be accurately estimated, and the degree of road roughness evaluated from these data. Similarly, alternative design techniques are available for any roadway problem. The emphasis here will be placed on presenting economical and simple methods for: (1) Determining whether the subgrade materials are collapsible; and (2) estimating the amount of volume change that is likely to occur in the 'Asst. Prof., Ctr. for Advanced Res. in Transp., Arizona State Univ., Tempe, AZ 85287. Note. Discussion open until April 1, 1989. To extend the closing date one month,
JSP外文文献原稿和译文
外文文献原稿和译文 原稿 JSP JSP (JavaServer Pages) is initiated by Sun Microsystems, Inc., with many companies to participate in the establishment of a dynamic web page technical standards. JSP technology somewhat similar to ASP technology, it is in the traditional HTML web page document (*. htm, *. html) to insert the Java programming paragraph (Scriptlet) and JSP tag (tag), thus JSP documents (*. jsp). Using JSP development of the Web application is cross-platform that can run on Linux, is also available for other operating systems. JSP technology to use the Java programming language prepared by the category of XML tags and scriptlets, to produce dynamic pages package processing logic. Page also visit by tags and scriptlets exist in the services side of the resources of logic. JSP page logic and web page design and display separation, support reusable component-based design, Web-based application development is rapid and easy. Web server in the face of visits JSP page request, the first implementation of the procedures of, and then together with the results of the implementation of JSP documents in HTML code with the return to the customer. Insert the Java programming operation of the database can be re-oriented websites, in order to achieve the establishment of dynamic pages needed to function. JSP and Java Servlet, is in the implementation of the server, usually returned to the client is an HTML text, as long as the client browser will be able to visit. JSP pages from HTML code and Java code embedded in one of the components. The server was in the pages of client requests after the Java code and then will generate the HTML pages to return to the client browser. Java Servlet JSP is the technical foundation and large-scale Web application development needs of Java Servlet and JSP support to