文献综述及外文文献翻译

华中科技大学文华学院

毕业设计（论文）外文文献翻译

（本科学生用）

题目：Plc based control system for the music fountain 学生姓名：_周训方___学号：060108011117 学部（系）: 信息学部

专业年级: _06自动化（1）班_

指导教师：张晓丹___职称或学位：助教__

20 年月日

外文文献翻译（译成中文1000字左右）：

【主要阅读文献不少于5篇，译文后附注文献信息，包括：作者、书名（或论文题目）、出版社（或刊物名称）、出版时间（或刊号）、页码。提供所译外文资料附件（印刷类含封面、封

底、目录、翻译部分的复印件等，网站类的请附网址及原文】

英文节选原文：

Central Processing Unit (CPU) is the brain of a PLC controller. CPU itself is usually one of the microcontrollers. Aforetime these were 8-bit microcontrollers such as 8051, and now these are 16-and 32-bit microcontrollers. Unspoken rule is that you’ll find mostly Hitachi and Fujicu microcontrollers in PLC controllers by Japanese makers, Siemens in European controllers, and Motorola microcontrollers in American ones. CPU also takes care of communication, interconnectedness among other parts of PLC controllers, program execution, memory operation, overseeing input and setting up of an output. PLC controllers have complex routines for memory checkup in order to ensure that PLC memory was not damaged (memory checkup is done for safety reasons).Generally speaking, CPU unit makes a great number of check-ups of the PLC controller itself so eventual errors would be discovered early. You can simply look at any PLC controller and see that there are several indicators in the form. of light diodes for error signalization.

System memory (today mostly implemented in FLASH technology) is used by a PLC for a process control system. Aside form. this operating system it also contains a user program translated forma ladder diagram to a binary form. FLASH memory contents can be changed only in case where user program is being changed. PLC controllers were used earlier instead of PLASH memory and have had EPROM memory instead of FLASH memory which had to be erased with UV lamp and programmed on programmers. With the use of FLASH technology this process was greatly shortened. Reprogramming a program memory is done through a serial cable in a program for application development.

User memory is divided into blocks having special functions. Some parts of a memory are used for storing input and output status. The real status of an input is stored either as “1”or as “0”in a specific memory bit/ each input or output has one corresponding b it in memory. Other parts of memory are used to store variable contents for variables used in used program. For example, time value, or counter value would be stored in this part of the memory.

PLC controller can be reprogrammed through a computer (usual way), but also through manual programmers (consoles). This practically means that each PLC controller can programmed through a computer if you have the software needed for programming. Today’s transmission computers are ideal for reprogramming a PLC cont roller in factory itself. This is of great importance to industry. Once the system is corrected, it is also important to read the right program into a PLC again. It is also good to check from time to time whether program in a PLC has not changed. This helps to avoid hazardous situations in factory rooms (some automakers have established communication networks which regularly check programs in PLC controllers to ensure execution only of good programs). Almost every program for programming a PLC controller possesses various useful options such as: forced switching on and off of the system input/outputs (I/O lines),

program follow up in real time as well as documenting a diagram. This documenting is necessary to understand and define failures and malfunctions. Programmer can add remarks, names of input or output devices, and comments that can be useful when finding errors, or with system maintenance. Adding comments and remarks enables any technician (and not just a person who developed the system) to understand a ladder diagram right away. Comments and remarks can even quote precisely part numbers if replacements would be needed. This would speed up a repair of any problems that come up due to bad parts. The old way was such that a person who developed a system had protection on the program, so nobody aside from this person could understand how it was done. Correctly documented ladder diagram allows any technician to understand thoroughly how system functions.

Electrical supply is used in bringing electrical energy to central processing unit. Most PLC controllers work either at 24 VDC or 220 VAC. On some PLC controllers you’ll find electrical supply as a separate module. Those are usually bigger PLC controllers, while small and medium series already contain the supply module. User has to determine how much current to take from I/O module to ensure that electrical supply provides appropriate amount of current. Different types of modules use different amounts of electrical current. This electrical supply is usually not used to start external input or output. User has to provide separate supplies in starting PLC controller inputs because then you can ensure so called “pure” supply for the PLC controller. With pure supply we mean supply where industrial environment can not affect it damagingly. Some of the smaller PLC controllers supply their inputs with voltage from a small supply source already incorporated into a PLC.

中文翻译：

从结构上分，PLC分为固定式和组合式（模块式）两种。固定式PLC包括CPU板、I/O 板、显示面板、内存块、电源等，这些元素组合成一个不可拆卸的整体。模块式PLC包括CPU 模块、I/O模块、内存、电源模块、底板或机架，这些模块可以按照一定规则组合配置。

在使用者看来，不必要详细分析CPU的内部电路，但对各部分的工作机制还是应有足够的理解。CPU的控制器控制CPU工作，由它读取指令、解释指令及执行指令。但工作节奏由震荡信号控制。运算器用于进行数字或逻辑运算，在控制器指挥下工作。寄存器参与运算，并存储运算的中间结果，它也是在控制器指挥下工作。CPU速度和内存容量是PLC的重要参数，它们决定着PLC的工作速度，IO数量及软件容量等，因此限制着控制规模。

PLC使用系统存储器（现在大部分采用闪存技术了）用于过程控制系统。除了这个操作系统之外，它还包括一个由梯形图翻译成而进制形式的用户程序。快擦型存储器（FLASH memory）的内容只有在改变用户程序的时候可以被改变。PLC控制器比快擦型存储器使用得更早，EPROM 存储器比快擦型存储器也更早，快擦型存储器必须用紫外线（UV，Ultra-Violet Ray）灯擦除，并在编程器上进行编程。由于快擦型存储器技术的应用，使得这个过程大大缩短了。在应用程序开发中，通过一个串行电缆可以对程序存储器进行重新编程。

用户存储器被分成具有特殊功能的块。一部分存储器用来存储输入和输出状态。一个输入的实际状态存储状态存储在专用存储器位上，为“1”或者“0”。每一个输入和输出在存储器

中都有一个相应的位。另外一部分存储器用来存储用户程序中的变量的内容。例如，定时器值，或者记数器值存放在存储器的这个部分。

PLC控制器可以通过计算机（通常方式）重新编程，但是也可以通过人工编程器9控制台）编程。实际上，这意味着，如果你有编程所需要的软件，早期PLC控制器可以通过计算机进行编程。今天的传输计算机是工厂自己对PLC控制器进行重新编程的理想设备。这对于工业企业来说是非常重要的。一旦系统修改结束，将正确的程序重新读入PLC控制器也是非常重要的。定期检查PLC中的程序是否改变是非常好的事情。这有助于避免车间发生危险情况（一些汽车制造商已经建立了通信网络，可以定期检查PLC中的程序，以保证运行的程序都是正确的）。

几乎所有用于为PLC控制器编程的程序都拥有各种不同的选项，例如系统输入/输出（I/O 线）的强制开关，程序实时跟踪以及图表验证。图表验证对于理解、定义失败和故障非常必要。程序员可以添加标记，书日和输出设备名称，以及对于查找错误或者对于系统维护很有用的注释。添加注释和标记可以使技术人员（不仅仅是开发人员）很快理解梯形图。注释和标记甚至还可以准确地引用零件号，如果需要更换零件的话。这将加快由于损坏零件而引起的任何问题的修理速度。响应的旧方法是这样的，开发系统的人必须保护这个程序，他旁边再没有人知道系统是怎样完成的。正确的、备有证明文件的梯形图使任何技术人员都能彻底理解系统的功能。

电源是为中央处理单元提供电源的。大部分PLC控制器的工作电压为24VDC或者220VAC。在有些PLC控制器上，你可以看见作为独立模块的电源。用户必须确定从I/O模块取出多大电流来保证电源提供适当的电流。不同的模块使用不同的电流量。

该电源一般不用于启动外部输入或输出。用户必须提供独立的电源来启动PLC控制器的输入和输出，因为这样可以保证PLC控制器的所谓“纯电源”。使用纯电源意味着工业环境中的电源不会严重影响它。有些较小的PLC控制器从与PLC控制器集成在一起的小电源为它们的输入提供电压源。

节选外文文献：

[1] A.Ghatak, K. Thyagaraian, Comtemperary Optics, Plenum Press, 1978

[2]J.P.Mathieu, Optics,Pergamon Press,1975l

[3] A.Nussbaum, R.A. Phillips, Comtemporary Optics for Scientists and Engineers Prentice-Hall,1975

[4] Lockwood H F and Hawrylo F Z.Low-threshold LOC GaAs injection

lasers .1971Appl.Phys.Lett.17:499~502

[5] TTsang W T.Symmetric separate confinement heterosturcture Lasers with low threshold and narrow beam divergence by M .B.E1980.Electronics Lett:936~941

英文文献翻译

中等分辨率制备分离的 快速色谱技术 W. Clark Still,* Michael K a h n , and Abhijit Mitra Departm(7nt o/ Chemistry, Columbia Uniuersity,1Veu York, Neu; York 10027 ReceiLied January 26, 1978 我们希望找到一种简单的吸附色谱技术用于有机化合物的常规净化。这种技术是适于传统的有机物大规模制备分离，该技术需使用长柱色谱法。尽管这种技术得到的效果非常好，但是其需要消耗大量的时间，并且由于频带拖尾经常出现低复原率。当分离的样本剂量大于1或者2g时，这些问题显得更加突出。近年来，几种制备系统已经进行了改进，能将分离时间减少到1-3h，并允许各成分的分辨率ΔR f≥（使用薄层色谱分析进行分析）。在这些方法中，在我们的实验室中，媒介压力色谱法1和短柱色谱法2是最成功的。最近，我们发现一种可以将分离速度大幅度提升的技术，可用于反应产物的常规提纯，我们将这种技术称为急骤色谱法。虽然这种技术的分辨率只是中等（ΔR f≥），而且构建这个系统花费非常低，并且能在10-15min内分离重量在的样本。4 急骤色谱法是以空气压力驱动的混合介质压力以及短柱色谱法为基础，专门针对快速分离，介质压力以及短柱色谱已经进行了优化。优化实验是在一组标准条件5下进行的，优化实验使用苯甲醇作为样本，放在一个20mm*5in.的硅胶柱60内，使用Tracor 970紫外检测器监测圆柱的输出。分辨率通过持续时间（r）和峰宽（w,w/2）的比率进行测定的（Figure 1），结果如图2-4所示，图2-4分别放映分辨率随着硅胶颗粒大小、洗脱液流速和样本大小的变化。

文献综述,外文翻译,论文网站

文献综述怎么写 1) 什么是文献综述? 文献综述是研究者在其提前阅读过某一主题的文献后，经过理解、整理、融会贯通，综合分析和评价而组成的一种不同于研究论文的文体。 2) 文献综述的写作要求 1、文献综述的格式 文献综述的格式与一般研究性论文的格式有所不同。这是因为研究性的论文注重研究的方法和结果，而文献综述介绍与主题有关的详细资料、动态、进展、展望以及对以上方面的评述。因此文献综述的格式相对多样，但总的来说，一般都包含以下四部分：即前言、主题、总结和参考文献。撰写文献综述时可按这四部分拟写提纲，再根据提纲进行撰写工作。 前言，要用简明扼要的文字说明写作的目的、必要性、有关概念的定义，综述的范围，阐述有关问题的现状和动态，以及目前对主要问题争论的焦点等。前言一般200-300字为宜，不宜超过500字。 正文，是综述的重点，写法上没有固定的格式，只要能较好地表达综合的内容，作者可创造性采用诸多形式。正文主要包括论据和论证两个部分，通过提出问题、分析问题和解决问题，比较不同学者对同一问题的看法及其理论依据，进一步阐明问题的来龙去脉和作者自己的见解。当然，作者也可从问题发生的历史背景、目前现状、发展方向等提出文献的不同观点。正文部分可根据内容的多少可分为若干个小标题分别论述。 小结，是结综述正文部分作扼要的总结，作者应对各种观点进行综合评价，提出自己的看法，指出存在的问题及今后发展的方向和展望。内容单纯的综述也可不写小结。 参考文献，是综述的重要组成部分。一般参考文献的多少可体现作者阅读文献的广度和深度。对综述类论文参考文献的数量不同杂志有不同的要求，一般以30条以内为宜，以最近3-5年内的最新文献为主。 2、文献综述规定 1. 为了使选题报告有较充分的依据，要求硕士研究生在论文开题之前作文献综述。 2. 在文献综述时，研究生应系统地查阅与自己的研究方向有关的国内外文献。通常阅读文献不少于30篇，且文献搜集要客观全面 3. 在文献综述中，研究生应说明自己研究方向的发展历史，前人的主要研究成果，存在的问题及发展趋势等。 4. 文献综述要条理清晰，文字通顺简练。 5. 资料运用恰当、合理。文献引用用方括号[ ]括起来置于引用词的右上角。 6. 文献综述中要有自己的观点和见解。不能混淆作者与文献的观点。鼓励研究生多发现问题、多提出问题、并指出分析、解决问题的可能途径，针对性强。 7. 文献综述不少于3000字。 3、注意事项 ⒈搜集文献应尽量全。掌握全面、大量的文献资料是写好综述的前提，否则，随便搜集一点资料就动手撰写是不可能写出好的综述。 ⒉注意引用文献的代表性、可靠性和科学性。在搜集到的文献中可能出现观点雷同，有的文献在可靠性及科学性方面存在着差异，因此在引用文献时应注意选用代表性、可靠性和科学性较好的文献。 ⒊引用文献要忠实文献内容。由于文献综述有作者自己的评论分析，因此在撰写时应分清作者的观点和文献的内容，不能篡改文献的内容。引用文献不过多。文献综述的作者引用间接文献的现象时有所见。如果综述作者从他人引用的参考文献转引过来，这些文献在他人

动画论文外文翻译

外文文献翻译 2.5.1译文：看电影的艺术 1930年代中期，沃尔特·迪斯尼才明确以动画电影娱乐观众的思想，动画片本身才成为放映主角（不再是其他剧情片的搭配）。于1937年下半年首映的动画片《白雪公主与七个小矮人》为动画片树立了极高的标准，至今任然指导着动画艺术家们。1940年，这一年作为迪斯尼制片厂的分水岭，诞生了《木偶奇遇记》和《幻想曲>。这些今天成为经典的作品在接下来的二十年中被追随效仿，产生了一系列广受欢迎的动画娱乐作品。包括《小飞象》，《灰姑娘》，《爱丽丝漫游仙境》，《彼得·潘》，《小姐与流浪儿》，他们的故事通常源自广为人知的文学故事。这些影片最不好的地方在于它们似乎越来越面向小观众。 在1966年第四你去死后，他的制片厂继续制作手绘动画影片，但是创作能量衰减，公司转而专注于著作真人是拍电影。然而1989年，对于我们所有孩子来说，动画《小美人鱼》赋予了迪士尼新的生命活力（就像animation这个词本身的定义一样——使有生命活力），从该片开始，出现了一系列令人惊叹不已的音乐动画片。两年后，《美女与野兽》问世，塔尔在制作过程中利用了计算机作为传统手绘技术的辅助手段，这部影片获得了奥斯卡最佳电影奖提名，它是第一部获此殊荣的动画片。更好的还在后面，就想着两部影片一样，后面紧接着出现的众多优秀作品——包括《狮子王》，《阿拉丁》，《花木兰》——延续了迪士尼的经典传统：大胆醒目的视觉效果、精致的剧本，以及我们在所有伟大的电影中，不管是动画还是其他类型中都能找到的普适性主题和出乎意料之处。迪士尼的新版《幻想曲》，又被称为《幻想曲2000》，把原版中的部分片段与新的创作部分糅合在一起。（而且，按照迪士尼管理层的说法，该片是首部在IMAX巨幕影院首映的剧情长片。） 亨利·塞利克执导了蒂姆·波顿出品的两部影片，即《圣诞惊魂夜》和《飞天巨桃历险记》——前者是一部完全原创的定格动画，影片画面有时渗透着无限的恐惧，后者改编自罗纳德·达尔的畅销儿童书，该影片以真人实景拍摄开始。《飞天巨桃历险记》对暴力画面和重大恐惧（比如说，离弃）的表达和处理毫无掩饰，表达的真实感受对成人来说和对儿童一样生动鲜明，而蒂姆·波顿的影片《僵尸新娘》，仅仅从名字上就已经显示出影片内容和该幽默表达的“成人”特

计算机网络-外文文献-外文翻译-英文文献-新技术的计算机网络

New technique of the computer network Abstract The 21 century is an ages of the information economy, being the computer network technique of representative techniques this ages, will be at very fast speed develop soon in continuously creatively, and will go deep into the people's work, life and study. Therefore, control this technique and then seem to be more to deliver the importance. Now I mainly introduce the new technique of a few networks in actuality live of application. keywords Internet Network System Digital Certificates Grid Storage 1. Foreword Internet turns 36, still a work in progress Thirty-six years after computer scientists at UCLA linked two bulky computers using a 15-foot gray cable, testing a new way for exchanging data over networks, what would ultimately become the Internet remains a work in progress. University researchers are experimenting with ways to increase its capacity and speed. Programmers are trying to imbue Web pages with intelligence. And work is underway to re-engineer the network to reduce Spam (junk mail) and security troubles. All the while threats loom: Critics warn that commercial, legal and political pressures could hinder the types of innovations that made the Internet what it is today. Stephen Crocker and Vinton Cerf were among the graduate students who joined UCLA professor Len Klein rock in an engineering lab on Sept. 2, 1969, as bits of meaningless test data flowed silently between the two computers. By January, three other "nodes" joined the fledgling network.

动画设计专业论文参考文献

动画设计专业论文参考文献 在日常学习和工作中，许多人都有过写论文的经历，对论文都不陌生吧，论文是描述学术研究成果进行学术交流的一种工具。还是对论文一筹莫展吗？下面是小编精心整理的动画设计专业论文参考文献，仅供参考，希望能够帮助到大家。 [1]王兆.目标导向设计中人物角色的应用与研究[D].东华大学.2011 [2]陈龙，徐人平，王浩军.基于Freeform系统的玩偶设计开发.北京市经济管理干部学院学报，2006. [3]大而不强创新不足中国网游或死在同质化和抄袭之手. [4]肖冬.移动互联网引爆未来[J].理财.2014,01:46-48 [5]中国互联网络发展状况统计报告.2010 [6]李洪海，石爽，李霞.交互界面设计[M].北京：化学工业出版社.2011 [7]浅析移动应用软件现状.中国电子商务研究中心. [8]张宏江.移动设备的发展将成根本趋势[J].新领军.2012:24 [9]艾瑞咨询.2014移动互联网用户行为研究报告[R].2014,5 [10]阳俊.游戏界面的人性化设计研究[D].重庆大学.2008 [11]陈启安.软件人机界面设计[M].北京：高等教育出版社.2008 [12]2013年中国手机游戏发展现状及未来展望分析. [13]艾瑞咨询.2014Q1中国移动购物市场交易规模达1350.9亿元 [14]李念.基于游戏机制的互联网产品交互设计研究[D].华东理工大 学.2012 [15]吕锦扬.移动互联网环境下的终端与应用发展[N].广东通信技 术.2013(12) [16]许懋琦，于晓燕.从设计学角度分析手机游戏成功因素[J].设 计.2014,04（200）：135-136 [17]郭伏,郝哲哲,许娜,屈庆星,丁一.基于情感体验的应用软件可用性评估方法研究[J].工业工程与管理.2013 (4) : 152-164

变电站_外文翻译_外文文献_英文文献_变电站的综合概述

英文翻译 A comprehensive overview of substations Along with the economic development and the modern industry developments of quick rising, the design of the power supply system become more and more completely and system. Because the quickly increase electricity of factories, it also increases seriously to the dependable index of the economic condition, power supply in quantity. Therefore they need the higher and more perfect request to the power supply. Whether Design reasonable, not only affect directly the base investment and circulate the expenses with have the metal depletion in colour metal, but also will reflect the dependable in power supply and the safe in many facts. In a word, it is close with the economic performance and the safety of the people. The substation is an importance part of the electric power system, it is consisted of the electric appliances equipments and the Transmission and the Distribution. It obtains the electric power from the electric power system, through its function of transformation and assign, transport and safety. Then transport the power to every place with safe, dependable, and economical. As an important part of power’s transport and control, the transformer substation must change the mode of the traditional design and control, then can adapt to the modern electric power system, the development of modern industry and the of trend of the society life. Electric power industry is one of the foundations of national industry and national economic development to industry, it is a coal, oil, natural gas, hydropower, nuclear power, wind power and other energy conversion into electrical energy of the secondary energy industry, it for the other departments of the national economy fast and stable development of the provision of adequate power, and its level of development is a reflection of the country's economic development an important indicator of the level. As the power in the industry and the importance of the national economy, electricity transmission and distribution of electric energy used in these areas is an indispensable component.。Therefore, power transmission and distribution is critical. Substation is to enable superior power plant power plants or power after adjustments to the lower load of books is an important part of power transmission. Operation of its functions, the capacity of a direct impact on the size of the lower load power, thereby affecting the industrial production and power consumption.Substation system if a link failure, the system will protect the part of action. May result in power outages and so on, to the production and living a great disadvantage. Therefore, the substation in the electric power system for the protection of electricity reliability,

文献检索课程教学设计(全部)

《文献检索》课程教学设计 目录 绪论：文献（信息）检索的意义及基础 (2) 项目一科技文献检索方法和图书馆的科学利用 (8) 项目二常见化学化工科技论文的写作 (11) 项目三美国化学文摘的使用 (14) 项目四专利文献的查询 (17) 项目五标准文献的查询 (20) 项目六计算机信息检索的应用 (23) 项目七信息检索策略综合应用训练 (26)

徐州工业职业技术学院教学设计（讲稿）

教学内容与设计 绪论：文献（信息）检索的意义及基础 自我介绍 提问一：你会检索吗？ 如果会，那么会用检索以下毕业专题的相关资料吗？ ?杜仲叶中绿原酸的提取分离 ?有机废水处理工艺设计 ?蚕丝蛋白制备工艺研究 ?铁矿石含铁量测定方法新工艺 ?基因工程干扰素生产工艺研究 提问的目的：突出检索技术直接是为毕业专题服务，这是一门技术。提问二：信息检索课是什么？ 学生如是说： 文献检索课程是井底之蛙的升降机，是雄鹰的翅膀，是横跨天堑的桥梁。 针对某一课题，通过电子检索查阅有关资料，才知道知识的浩瀚，才知道世界的宽广，才知道“山外青山，楼外楼”。 它是我在大学期间所学的最重要，最有用的课程之一，有了它，我们将会受益终生。教会我们一种方法，一种主动 了解外界，提高自己，放眼世界的方法。 检索不仅是我们学习的制胜法宝，更是一条贯穿我们生活的红线。正因为有了这门课的学习，现在大脑的检索意识 就比较强烈，越搜越快！前几天，问同学借自行车，他告 诉我车子大致地点，是永久牌，有车栏，略有一点蓝。到 了现场，脑海中一下就有了先找有栏的，再找蓝颜色的， 最后确定是不是永久的，很快就找到了。 我爱检索，就像爱自己的生命一样。 最后我想说，我们是幸运的！我们学到了一门真正有用的课，它对我的影响和帮助将是伴随我一身的。 提问三：借鉴与创新的关系？ 科学研究是“站在前人肩膀上”的事业，而创新又是科学研究的灵魂，即要求“前无古人”。 时间分配 2min 引导学生回答 8min 10min 通过往届学生对信息检索课的评价能够激起学生学习这门课的兴趣，也可以突出这门课对个人的作用。 10min 通过提问让学生

毕业设计_英语专业论文外文翻译

1. Introduction America is one of the countries that speak English. Because of the special North American culture, developing history and the social environment, American English has formed its certain unique forms and the meaning. Then it turned into American English that has the special features of the United States. American English which sometimes also called United English or U.S English is the form of the English language that used widely in the United States .As the rapid development of American economy, and its steady position and strong power in the world, American English has become more and more widely used. As in 2005, more than two-thirds of English native speakers use various forms of American English. The philologists of the United States had divided the English of the United States into four major types: “America n creating”; “Old words given the new meaning”; “Words that eliminated by English”;“The phonetic foreign phrases and the languages that are not from the English immigrates”[1]. Compared to the other languages, American English is much simple on word spelling, usage and grammar, and it is one of the reasons that American English is so popular in the world. The thesis analyzes the differences between American English and British English. With the main part, it deals with the development of American English, its peculiarities compared to that of British English, its causes and tendency. 2. Analyses the Differences As we English learners, when we learning English in our junior or senior school, we already came across some words that have different spellings, different pronunciations or different expressions, which can be represented by following contrasted words: spellings in "color" vs. "colour"; pronunciations in "sec-re-ta-ry" vs. "sec-re-try";

员工激励的文献综述、外文翻译.doc

一、激励理论的背景 在经济发展的过程中,劳动分工与交易的出现带来了激励问题。激励理论是行为科学中用于处理需要，动机，目标和行为四者之间关系的核心理论。行为科学认为人的动机来自需要，由需要确定人们的行为目标，激励则作用于人内心活动，激发，驱动和强化人的行为。哈佛大学维廉詹姆士研究表明：在没有激励措施下,下属一般仅能发挥工作能力的20%～30%，而当他受到激励后,其工作能力可以提升到80%～90%，所发挥的作用相当于激励前的3到4倍。日本丰田公司采取激励措施鼓励员工提建议，结果仅1983年一年，员工提了165万条建议，平均每人31条，它为公司带来900亿日元利润，相当于当年总利润的18%。由于激励的效果明显，所以各种组织为了提高生产效率，有些专家学者就开始了对激励理论的研究之中，探索激励的无穷潜力。 二、国外研究现状 国外对于激励理论有了大量的研究并获得了丰硕的成果。总体来说，可以分为两类激励理论。一类是以人的心理需求和动机为主要研究对象的激励理论，熟称“内容型激励理论”。另一类是以人的心理过程和行为过程相互作用的动态系统为研究对象的激励过程理论,它也被称作是“行为型激励理论”。 1 内容型激励理论 1.1 奠瑞的人类人格理论 这种理论认为，在面临着动态且不断变化的环境时，人们都是自适应的。它把需求分成了两种类型，即生理需求和心理需求。前者与人体基本生理过程的满足感有关，而后者所关注的是情绪上和精神上的满足感。 1.2 马斯洛的“需要层次”理论 美国心理学家马斯洛(A.H.Maslow)进一步发展了莫瑞的研究，在1954年出版的《动机与人格》一书中对该理论作了进一步的阐释。马斯洛认为人的需要可以划分为五个层次，从低到高依次为生理需要，安全需要，社交需要，尊熏需要，自我实现需要，且这五个层次的顺序，对每个人都是相同的。只有当较低层次的需要获得了基本满足后，下一个较高层次的需要才能成为主导需要。 1.3 赫茨伯格的激励—保健双因素理论 美国心理学家赫茨伯格因素理论打破了这一假设。他于1959年在《工作的激励》一书中提出了保健——激励因素理论，简称双因素理论。即保健因素和激励因素。保健因素可以用来体现高水平员工的不满意，激励因素可以用来体现高水平员工的满意度。他认为只有激励因素才能促发员工积极性,提高生产效率。 2 行为型激励理论 2.1 洛克的目标设置理论 2O世纪6O年代末，埃德温·A·洛克和他的同事们花了许多年的时间研究目标对于人类行为和绩效的效果。他们的研究导致了目标设置理论的创立并不断地得到验证，提出：指向一共同目标的工作意向是工作效率的主要源泉。他还提出了具体的设置目标的步骤。 2.2 亚当斯的公平理论 美国心理学家亚当斯(J.s.Adams)对员工受激励程度的大小与他人之间的关系进行研究，并在《工人关于工资不公平的内心冲突同其生产率的关系》(1962年与罗森合写)，《工

外文文献—动画

Animation Animation is the rapid display of a sequence of images of 2-D or 3-D artwork or model positions to create an illusion of movement. The effect is an optical illusion of motion due to the phenomenon of persistence of vision, and can be created and demonstrated in several ways. The most common method of presenting animation is as a motion picture or video program, although there are other methods. Early examples An Egyptian burial chamber mural, approximately 4000 years old, showing wrestlers in action. Even though this may appear similar to a series of animation drawings, there was no way of viewing the images in motion. It does, however, indicate the artist's intention of depicting motion. Early examples of attempts to capture the phenomenon of motion drawing can be found in paleolithic cave paintings, where animals are depicted with multiple legs in superimposed positions, clearly attempting to convey the perception of motion. Five images sequence from a vase found in Iran A 5,000 year old earthen bowl found in Iran.It has five images of a goat painted along the sides. This has been claimed to be an example of early animation. However, since no equipment existed to show the images in motion, such a series of images cannot be called animation in a true sense of the word. A Chinese zoetrope-type device had been

博物馆 外文翻译 外文文献 英文文献

第一篇： 航空博物馆与航空展示公园 巴特罗米耶杰·基谢列夫斯基 飞翔的概念、场所的精神、老机场的建筑---克拉科夫新航空博物馆理性地吸取了这些元素，并将它们整合到一座建筑当中。Rakowice-Czyzyny机场之前的旧飞机修理库为新建筑的平面和高度设定了模数比例。在此基本形态上进一步发展，如同裁切和折叠一架纸飞机，生成了一座巨大的建筑。其三角形机翼是由混凝土制成，却如同风动螺旋桨一样轻盈。这个机翼宽大通透，向各个方向开敞。它们的形态与组织都是依据内部功能来设计的。机翼部分为3个不平衡的平面，使内外景观在不断变化中形成空间的延续性，并且联系了建筑内的视觉焦点和室外的展览区。 新航空展示公园的设计连接了博物馆的8栋建筑和户外展览区，并与历史体验建立联系。从前的视觉轴线与通道得到尊重，旧的道路得到了完善，朝向飞机场和跑道的空间被限定出来。每栋建筑展示了一个主题或是一段飞行史。建筑周围伸展出巨大的平台，为特殊主题的室外展览提供了空间。博物馆容纳了超过150架飞机、引擎、飞行复制品、成套的技术档案和历史图片。这里的特色收藏是飞机起源开始的各种飞行器，如Jatho1903、Grade1909、莱特兄弟1909年的飞机模型和1911年的鸽式单翼机。 The first passage: Museum for aviation and aviation exhibition park Bartiomiej Kislelewski The idea of flying, the spirit of place, the structure of the historic airfield – the new Museum of Aviation in Krakow takes up these references intellectually and synthesizes them into a building. The old hangars of the former airport Rakowice Czyzyny set the modular scale for the footprint and the height of the new building. Developed from this basic shape, as if cut out and folded like a paper airplane, a large structure has been generated, with triangular wings made of concrete and yet as light as a wind-vane propeller. The wings are generously glazed and open in all directions. Their form and arrangement depend on the interior uses. In the floor plans of the wings, the three offset

外文文献—动画讲课教案

外文文献—动画

Animation Animation is the rapid display of a sequence of images of 2-D or 3-D artwork or model positions to create an illusion of movement. The effect is an optical illusion of motion due to the phenomenon of persistence of vision, and can be created and demonstrated in several ways. The most common method of presenting animation is as a motion picture or video program, although there are other methods. Early examples An Egyptian burial chamber mural, approximately 4000 years old, showing wrestlers in action. Even though this may appear similar to a series of animation drawings, there was no way of viewing the images in motion. It does, however, indicate the artist's intention of depicting motion. Five images sequence from a vase found in Iran There is no single person who can be considered the "creator" of film animation, as there were several people working on projects which could be considered animation at about the same time. Georges Méliès was a creator of special-effect films; he was generally one of the first people to use animation with his technique. He discovered a technique by accident which was to stop the camera rolling to change something in the scene, and then continue rolling the film. This idea was later known as stop-motion animation. Early examples of attempts to capture the phenomenon of motion drawing can be found in paleolithic cave paintings, where animals are depicted with multiple legs in superimposed positions, clearly attempting to convey the perception of motion. An Egyptian burial chamber mural , approximately 4000 years old, showing wrestlers in action. Even though this may appear similar to a series of animation drawings, there was no way of viewing the images in motion. It does, however, indicate the artist's intention of depicting motion. A 5,000 year old earthen bowl found in Iran.It has five images of a goat painted along the sides. This has been claimed to be an example of early animation. However, since no equipment existed to show the images in motion, such a series of images cannot be called animation in a true sense of the word. A Chinese zoetrope-type device had been invented in 180 AD. The phenakistoscope, praxinoscope, and the common flip book were early popular animation devices invented during the 19th century. These devices produced the appearance of movement from sequential drawings using technological means, but animation did not really develop much

java毕业论文外文文献翻译

Advantages of Managed Code Microsoft intermediate language shares with Java byte code the idea that it is a low-level language witha simple syntax , which can be very quickly translated intonative machine code. Having this well-defined universal syntax for code has significant advantages. Platform independence First, it means that the same file containing byte code instructions can be placed on any platform; atruntime the final stage of compilation can then be easily accomplished so that the code will run on thatparticular platform. In other words, by compiling to IL we obtain platform independence for .NET, inmuch the same way as compiling to Java byte code gives Java platform independence. Performance improvement IL is actually a bit more ambitious than Java bytecode. IL is always Just-In-Time compiled (known as JIT), whereas Java byte code was ofteninterpreted. One of the disadvantages of Java was that, on execution, the process of translating from Javabyte code to native executable resulted in a loss of performance. Instead of compiling the entire application in one go (which could lead to a slow start-up time), the JITcompiler simply compiles each portion of code as it is called (just-in-time). When code has been compiled.once, the resultant native executable is stored until the application exits, so that it does not need to berecompiled the next time that portion of code is run. Microsoft argues that this process is more efficientthan compiling the entire application code at the start, because of the likelihood that large portions of anyapplication code will not actually be executed in any given run. Using the JIT compiler, such code willnever be compiled.